TY - THES A1 - Hollberg, Alexander T1 - A parametric method for building design optimization based on Life Cycle Assessment N2 - The building sector is responsible for a large share of human environmental impacts. Architects and planners are the key players for reducing the environmental impacts of buildings, as they define them to a large extent. Life Cycle Assessment (LCA) allows for the holistic environmental analysis of a building. However, it is currently not employed to improve the environmental performance of buildings during the design process, although the potential for optimization is greatest there. One main reason is the lack of an adequate means of applying LCA in the architectural design process. As such, the main objective of this thesis is to develop a method for environmental building design optimization that is applicable in the design process. The key concept proposed in this thesis is to combine LCA with parametric design, because it proved to have a high potential for design optimization. The research approach includes the analysis of the characteristics of LCA for buildings and the architectural design stages to identify the research gap, the establishment of a requirement catalogue, the development of a method based on a digital, parametric model, and an evaluation of the method. An analysis of currently available approaches for LCA of buildings indicates that they are either holistic but very complex or simple but not holistic. Furthermore, none of them provide the opportunity for optimization in the architectural design process, which is the main research gap. The requirements derived from the analysis have been summarized in the form of a catalogue. This catalogue can be used to evaluate both existing approaches and potential methods developed in the future. In this thesis, it served as guideline for the development of the parametric method – Parametric Life Cycle Assessment (PLCA). The unique main feature of PLCA is that embodied and operational environmental impact are calculated together. In combination with the self-contained workflow of the method, this provides the basis for holistic, time-efficient environmental design optimization. The application of PLCA to three examples indicated that all established mandatory requirements are met. In all cases, environmental impact could be significantly reduced. In comparison to conventional approaches, PLCA was shown to be much more time-efficient. PLCA allows architects to focus on their main task of designing the building, and finally makes LCA practically useful as one of several criteria for design optimization. With PLCA, the building design can be time-efficiently optimized from the beginning of the most influential early design stages, which has not been possible until now. PLCA provides a good starting point for further research. In the future, it could be extended by integrating the social and economic aspects of sustainability. T3 - bauhaus.ifex research series - 4 KW - Bauentwurf KW - Architektur KW - Bauökologie KW - Nachhaltigkeit KW - Life Cycle Assessment KW - Parametric Design KW - Building Information Modelling KW - BIM KW - Optimization Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180928-38000 ER - TY - THES A1 - Spiekermann, Christoph T1 - Unterstützung der Material- und Produktauswahl in der Architektur durch Plausibilität der Entscheidung T1 - Support of material and product selection in architecture by plausibility of decision N2 - Architektur wird vorwiegend über die den Raum begrenzenden Oberflächen wahrgenommen. Das Oberflächenmaterial kann daher mit seinen sinnlichen Eigenschaften die Entwurfsintention unterstützen, zugleich muss es aber auch zahlreiche technische, ökonomische und ökologische Anforderungen erfüllen. Materialwahl in der Architektur bedeutet somit das Abwägen einer Vielzahl von Parametern, die sich sowohl inhaltlich als auch hinsichtlich ihrer Relevanz stark unterscheiden. Die Entscheidung für ein Material kann dabei durch verschiedene analoge und digitale Ansätze unterstützt werden. Die vorhandenen Systeme sind jedoch allesamt begrenzt: in den von ihnen berücksichtigten Aspekten, den möglichen Suchwegen oder ihren Inhalten. Keines der in dieser Arbeit untersuchten Systeme berücksichtigt zudem die unterschiedliche Wichtigkeit oder gegenseitige Abhängigkeiten und Unschärfen der in die Materialwahl einfließenden Kriterien. Die vorliegende Arbeit formuliert daher eine Gesamtstrategie zur besseren Unterstützung der Entscheidung für ein Oberflächenmaterial. Im Wesentlichen wird dabei eine Methode vorgestellt, wie die inhaltlich höchst unterschiedlichen Kriterien, welche Einfluss auf die Materialwahl ausüben, mit ihrer jeweiligen Relevanz gegeneinander in Ansatz gebracht werden können, um eine umfassende Bewertung der Materialalternativen zu ermöglichen. In einem zweiten Schritt wird mit Multidimensional Scaling eine Technik der Informationsvisualisierung benutzt, die eine zusätzliche Unterstützung durch weitere Analysemöglichkeiten und andere Suchwege eröffnet. Das vorgeschlagene Verfahren ist in einem Software-Prototyp umgesetzt. Die Arbeit leistet damit einen Beitrag, die Auswahl eines geeigneten Materials in der Architektur zu erleichtern, diese Entscheidung plausibel begründen zu können und den Weg der Entscheidungsfindung nachvollziehbar werden zu lassen. N2 - Architecture is mainly perceived via surfaces. The surface material can support the design intention with his sensuous properties but at the same time it has to fulfill numerous technical, economic and environmental requirements. The choice of material in architecture means balancing a variety of parameters, which differ both in substance and in terms of their relevance. The decision for a material can be supported by various analog and digital techniques. But all existing systems are limited in their consideration aspects, in the available ways of search or in its contents. None of these systems respect the different importance or the dependencies and blurs of material influencing criteria. The presented work formulates an overall strategy to improve the decision for a surface material. In essence, a method is presented, how the different criteria which influence the choice can be brought to a comprehensive assessment even with their relevance in order to judge the material alternatives. In a second step, multidimensional scaling as a technique in information visualization is used to require additional support by further analysis options and other ways of search. The proposed procedure is implemented in a software prototype. The work makes a contribution to facilitate the selection of suitable material in the architecture, to give plausible reasons for this decision and to reflect the selection process. KW - Entscheidungsbegründung KW - CAD KW - Bauentwurf KW - Plausibilität KW - Materialwahl KW - Multidimensional Scaling KW - material selection KW - multidimensional scaling Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080925-14253 ER - TY - JOUR A1 - Uhl, Ottokar T1 - Prozesshafte Planung : (offene Planung) N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,3-4/263-266 KW - Bauentwurf KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11951 ER - TY - JOUR A1 - Donath, Dirk T1 - Virtuelle Architektur als reale Architektur : ... Techniken und Umfeld der Entwurfsunterstützung mittels VR N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,1-2/219-229 KW - Architektur KW - Bauentwurf KW - Virtuelle Realität KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11756 ER - TY - JOUR A1 - Burmeister, Karl-Heinz T1 - Ferdinand-Kramer-Seminar am Bauhaus Dessau N2 - Wissenschaftliches Kolloquium vom 24. bis 26. Juni 1986 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Der wissenschaftlich-technische Fortschritt und die sozial-kulturellen Funktionen von Architektur und industrieller Formgestaltung in unserer Epoche' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 33.1987,4-6/341 KW - Bauentwurf KW - Bauhaus-Kolloquium KW - Weimar KW - 1986 Y1 - 1987 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10474 ER - TY - JOUR A1 - Götze, Hans T1 - Das 6. Hannes-Meyer-Seminar am Bauhaus Dessau N2 - Wissenschaftliches Kolloquium vom 24. bis 26. Juni 1986 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Der wissenschaftlich-technische Fortschritt und die sozial-kulturellen Funktionen von Architektur und industrieller Formgestaltung in unserer Epoche' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 33.1987,4-6/340 KW - Bauentwurf KW - Bauhaus-Kolloquium KW - Weimar KW - 1986 Y1 - 1987 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-9932 ER - TY - JOUR ED - Professur Theorie und Geschichte der modernen Architektur, T1 - Konrad Püschel - Schülerarbeiten am Bauhaus Dessau : Kabinettausstellung im Juni 1979 in Weimar N2 - Wissenschaftliches Kolloquium vom 27. bis 29. Juni 1979 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: '60 Jahre Gründung Bauhaus' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 26.1979,4-5/454 KW - Püschel KW - Konrad KW - Dessau / Bauhaus KW - Bauentwurf KW - Bauhaus-Kolloquium KW - Weimar KW - 1979 Y1 - 1979 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8971 ER - TY - CHAP A1 - Voß, A. A1 - Coulon, Carl-Helmut A1 - Gebhardt, F. T1 - KI-Methoden beim Entwurf komplexer Gebäude N2 - Anhand von Ergebnissen aus dem FABEL-Projekt wird gezeigt, welche Beiträge Methoden der Künstlichen Intelligenz, insbesondere der Wissensverarbeitung beim Entwurf komplexer Gebäude leisten können. Exemplarisch werden spezialisierte wissensintensive Methoden, und allgemeine fallbasierte Methoden zum Retrieval und zur Wiederverwendung früherer Entwürfe vorgestellt. Es werden Fragen der Integration von Wissen, Fällen und Daten diskutiert. Der Prototyp des FABEL-Projekts verwendet die Metapher der virtuellen Baustelle, um die verschiedenen Methoden als Planungswerkzeuge in einem CAD-System integriert anzubieten. Ein Planungsmodell dient der zusätzlichen Orientierung des Planers. Die Ergebnisse sind interessant für den Entwurf komplexer Unikate, dürften aber auch als Zusatz zu elektronisch angebotenen Katalogen relevant sein. KW - Bauentwurf KW - CAD KW - Künstliche Intelligenz Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4207 ER - TY - CHAP A1 - Flemming, Ulrich A1 - Snyder, J. T1 - Building and Databases: the SEED Experience N2 - We describe the database requirements of SEED (Software Environment to Support the Early Phases in Building Design). The requirements are typical for a database that intends to support a heterogeneous design support environment consisting of independent software modules with diverse internal design models, requirements not met by any commercial database system. The design and implementation of this database is an integral part of the overall software engineering effort. We describe the SEED approach that integrates external and in-house software based on a shared information model specified in the modeling language SPROUT, which allows for the specification of domains, and classes, relationship types and their behavior, and multiple classifications. The SPROUT run-time system organizes and coordinates the communication between the software modules and the database KW - Bauentwurf KW - Datenbank Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4151 ER - TY - THES A1 - Henkel, Thorsten T1 - Faktoren für alternative Entwurfsmethoden beim Einsatz digitaler Entwurfswerkzeuge in räumlich verteilten Arbeitsstrukturen T1 - Factors for alternative methods of planing by the use of digital planing tools in spatial distant workgroups N2 - Die Dissertation exploriert und evaluiert Faktoren für alternative Entwurfsmethoden in räumlich verteilten Arbeitsstrukturen. Der erste Teil motiviert die Arbeit durch eine theoretische Exploration von Alltagserfahrungen im Vergleich zu historischen Analogien beim Einsatz neuer Techniken / Technologien. Im zweiten Teil werden empirisch Faktoren für alternative digitale Entwurfsmethoden exploriert. Im dritten Teil erfolgt eine Theoriebildung und die Entwicklung einer Entwurfsmethode auf der Basis der Explorierten Hypothesen aus Teil eins und zwei. Der vierte und fünfte Teil widmet sich der explanativen Falsifikation der Theorie durch einen Feldversuch. Dieser wird durch eine sozialwissenschaftliche Evaluation unterstützt. Die Ergebnisse werden im Hinblick auf die entwickelte Methode und weitere Untersuchungen diskutiert. N2 - The dissertation explores and evaluates factors for alternative planing methods in spatial distant workgroups. The first part provides motivation, which is initiated by a theoretical exploration off everyday experiences in comparison to historical analogies according to the use of new techniques / technologies. The second part deals with the exploration of factors for alternative digital planing methods. The third part is about building a theory upon the explored hypothesises from part one and two. The fourth and fifth part is dedicated to a experiment, which was supposed to show the particle abilities of the developed method. This experiment was evaluated by the means of sociology too. The result are discussed according to the developed method and to carry on further examinations. KW - Bauentwurf KW - Systementwurf KW - Digitalisierung KW - Entwurfsmethoden KW - digitale Entwurfswerkzeuge KW - räumlich verteiltes Arbeiten KW - methods of planing KW - digital planing tools KW - spatial distant work groups Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040225-473 ER - TY - THES A1 - Steinmann, Frank T1 - Modellbildung und computergestütztes Modellieren in frühen Phasen des architektonischen Entwurfs T1 - Generalised models and computer aided modelling in early stages of architectural design N2 - Die Arbeit befaßt sich mit der Konzeption und exemplarischen Realisierung von CAD-Tools zur Unterstützung des konzeptionellen Entwurfs von Gebäuden. Die Spezifik des Bauentwurfs macht eine Analyse des Arbeitsfelds "früher architektonischer Entwurf" aus Sicht der Informationsverarbeitung nichtig. Auf der Grundlage einer Untersuchung des Entwurfsprozesses aus pragmatischer und kognitiver Sicht wird ein generisches Prozeßmodell "Entwurf" abgeleitet und mit Beispielen belegt. Ausgehend von der Auffassung, daß Entwerfen der Prozesse das Vorausdenken von Bauwerken in Modellen ist, wird die "objektorientierte Modellierungstechnologie" einer eingehenden Bewertung unterzogen. Ihre methodische Eignung zur modellhaften Abbildung von Bauwerken wird grundsätzlich nachgewiesen. Mit Blick auf die spezifischen Gegebenheiten der frühen Entwurfsphasen, wie Unschärfe und nicht formalisiert darstellbarer Informationen, werden einige Erweiterungen vorgeschlagen und experimentiert. Ziel der Arbeit ist es, ein multipel und über lange Zeiträume auswertbares Bauwerksmodell zu schaffen, um Planungsprozesse über den gesamten Bauwerkslebenszyklus durchgängig zu unterstützen. Grundlage des Entwerfens mittels der objektorientierten Methodik sind generalisierte Domänenmodelle. Es wird gezeigt, daß für eine Interpretation konkreter Bauwerksmodelle die generalisierten Domänenmodelle entweder zu normieren sind oder aber daß sie explizit verfügbar sein müssen. Die Objektorientierung bietet die Möglichkeit, sowohl konkrete als auch generalisierte Modelle in einem einheitlichen Metamodell zu beschreiben... N2 - The doctoral thesis deals with the conception for CAD-Tools especially for the early phases of architectural design. Some prototypical implementations make the concept clear. Buildings are a special matter for design activities. That is the reason why an analysis is necessary especially for the early design stages. The objective of that analysis is that CAD-tools for this design stage can be implemented. The topic "design" has two aspects: the design process and the object models. An examination of the design process is the basis for the suggested "generic design Process model". The starting point for the examination is the pragmatic process model on the one hand and the cognitive process model on the other hand. The "generic process model" consists of "atomic design activities" which are illustrated by examples. Starting with the thesis architectural design is a process to plan a building in advance with help of models, the object oriented modelling technology is thoroughly evaluated. The suitability of the method is generally proofed for the representation of buildings by analogical models. Models in early phases of architectural design have some special features like fuzziness, abstraction and unformaliseable information. As regards these special features, some extensions of the modelling method are suggested and experimentally evaluated. The objective of this work is to support planning and management processes during the whole building life cycle. Therefore the models have to be structured in a way that it becomes possible to interpret and evaluate building models during this long period. Generalised domain models are the basis for a design with the help of the object oriented design method. For an interpretation of a model for an existing or virtual building it is necessary either to standardise the domain model or to provide an explicit, accessible domain model. The object oriented paradigm provides the possibility to describe both generalised models (knowledge) and their instanciation (concrete building models)... KW - Bauentwurf KW - Gebäude KW - CAD KW - Computer science KW - Architecture KW - CAD-Systems KW - Computer aided architectural design KW - Functional design Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040220-437 ER -