TY - JOUR A1 - Noh, Jung-Hwi A1 - Park, Jong-Heon T1 - A Calculation of Initial Cable Force for Ko-Ha Grand Bridge N2 - The primary objective of initial shape analysis of a cable stayed bridge is to calculate initial installation cable tension forces and to evaluate fabrication camber of main span and pylon providing the final longitudinal profile of the bridge at the end of construction. In addition, the initial cable forces depending on the alternation of the bridge’s shape can be obtained from the analysis, and will be used to provide construction safety during construction. In this research, we conducted numerical experiments for initial shape of Ko-ha bridge, which will be constructed in the near future, using three different typical methods such as continuous beam method, linear truss method, and IIMF (Introducing Initial Member Force) method KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Hängebrücke KW - cable stayed bridge KW - cable force KW - initial shape KW - initial equilibrium state Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2459 ER - TY - CHAP A1 - O'Brien, William A1 - Danso-Amoako, Mark A1 - Issa, Raja T1 - A Case Study of IFC and CIS/2 Support for Steel Supply Chain Processes N2 - The evolution of data exchange and integration standards within the Architectural, Engineering and Construction industry is gradually making the long-held vision of computer-integratedconstruction a reality. The Industry Foundations Classes and CIMSteel Integration Standards are two such standards that have seen remarkable successes over the past few years. Despite successes, these standards support the exchange of product data more than they do process data, especially those processes that are loosely coupled with product models. This paper reports on on-going research to evaluate the adequacy of the IFC and CIS/2 standards to support process modeling in the steel supply chain. Some initial recommendations are made regarding enhancements to the data standards to better support processes. KW - Bauwerk KW - Datenmanagement KW - Datenaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1195 ER - TY - JOUR A1 - Beer, Daniel G. A1 - Firmenich, Berthold A1 - Richter, Torsten T1 - A Concept for CAD Systems with Persistent Versioned Data Models N2 - The synchronous distributed processing of common source code in the software development process is supported by well proven methods. The planning process has similarities with the software development process. However, there are no consistent and similarly successful methods for applications in construction projects. A new approach is proposed in this contribution. KW - Produktmodell KW - Bautechnik KW - Forschungskooperation KW - Versionsverwaltung KW - CAD Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2046 ER - TY - CHAP A1 - Tsutsumi, Kazutoshi A1 - Hashimoto, Hiromi T1 - A Development of the Building Kansei Information Retrieval System N2 - The purpose of this research is to develop the method to retrieve a building name from the impression of the building. First, the images of the building are registered as database by the questionnaire. Next, the images of the objective building are compared with the degree of matching in image databases, and the building with high synthetic matching degree is retrieved. This system could get a good retrieval result. Moreover, image processing was done, and image databases are trained by neural network from the amount of characteristics of the image, and the retrieval system by image processing was examined. KW - Mehragentensystem KW - Lernendes System KW - Informationssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1884 ER - TY - CHAP A1 - Freundt, Martin A1 - Beucke, Karl T1 - A flexible model for scheduling building processes based on graph theory and fuzzy numbers N2 - The methods currently used for scheduling building processes have some major advantages as well as disadvantages. The main advantages are the arrangement of the tasks of a project in a clear, easily readable form and the calculation of valuable information like critical paths. The main disadvantage on the other hand is the inflexibility of the model caused by the modeling paradigms. Small changes of the modeled information strongly influence the whole model and lead to the need to change many more details in the plan. In this article an approach is introduced allowing the creation of more flexible schedules. It aims towards a more robust model that lowers the need to change more than a few information while being able to calculate the important propositions of the known models and leading to further valuable conclusions. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Scheduling KW - Fuzzy-Logik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1587 ER - TY - CHAP A1 - Schapke, Sven-Eric A1 - Scherer, Raimar J. T1 - A Four Layer Bayesian Network for Product Model Based Information Mining N2 - Business and engineering knowledge in AEC/FM is captured mainly implicitly in project and corporate document repositories. Even with the increasing integration of model-based systems with project information spaces, a large percentage of the information exchange will further on rely on isolated and rather poorly structured text documents. In this paper we propose an approach enabling the use of product model data as a primary source of engineering knowledge to support information externalisation from relevant construction documents, to provide for domain-specific information retrieval, and to help in re-organising and re-contextualising documents in accordance to the user’s discipline-specific tasks and information needs. Suggested is a retrieval and mining framework combining methods for analysing text documents, filtering product models and reasoning on Bayesian networks to explicitly represent the content of text repositories in personalisable semantic content networks. We describe the proposed basic network that can be realised on short-term using minimal product model information as well as various extensions towards a full-fledged added value integration of document-based and model-based information. KW - Bauwerk KW - Datenmanagement KW - Produktmodell Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1207 ER - TY - CHAP A1 - Bédard, Claude A1 - Mora, Rodrigo A1 - Rivard, Hugues T1 - A Framework for Computer-Aided Conceptual Design of Building Structures N2 - This paper describes a framework for computer-aided conceptual design of building structures that results from building architectural considerations. The central task that is carried out during conceptual design is the synthesis of the structural system. This paper proposes a methodology for the synthesis of structural solutions. Given the nature of architectural constraints, user-model interactivity is devised as the most suitable computer methodology for driving the structural synthesis process. Taking advantage of the hierarchical organization of the structural system, this research proposes a top-down approach for structural synthesis. Through hierarchical refinement, the approach lends itself to the synthesis of global and local structural solutions. The components required for implementing the proposed methodology are briefly described. The main components have been incorporated in a proof-of-concept prototype that is being tested and validated with actual buildings. KW - Konzipieren KW - Bauwerk KW - Software Engineering Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1018 ER - TY - JOUR A1 - Ma, Zhiliang A1 - Qin, Liang T1 - A Framework of Management Information System for Construction Projects N2 - A comprehensive framework of information management system for construction projects in China has been established through extensive literature survey and field investigation. It utilizes the potential information technologies and covers the practical management patterns as well as the major aspects of construction project management. It can be used to guide and evaluate the design of the information management systems for construction projects in order to make the system to be applicable to a wide variety of construction projects and survive the changes in project management. KW - Mehragentensystem KW - Lernendes System KW - Managementinformationssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2126 ER - TY - CHAP A1 - Rickelt, Christian A1 - Reese, Stefanie T1 - A model adaptive and model reduction strategy combining system-theoretical methods and substructuring N2 - This paper focuses on a new three-level discretisation strategy which enables the transition between continuum/structural (I) and structural/black box modelling (II). The transition (I) is realised by means of a model adaptive concept based on an innovative finite element technology. For transition (II) we apply the truncated balanced realisation method (TBR). The latter represents an established system theoretical model reduction technique which is here combined with a novel substructure technique. The approach provides a modular concept to facilitate the computational analysis of complex structures. The final goal is to apply the strategy to life time estimation. KW - Adaptives System Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1516 ER - TY - JOUR A1 - El-Rayes, Khaled A1 - Hyari, Khalied T1 - A Multi-objective Model for Optimizing Construction Planning of Repetitive Infrastructure Projects N2 - This paper presents the development of a model for optimizing resource utilization in repetitive infrastructure projects. The model provides the capability of simultaneous minimization of both project duration and work interruptions for construction crews. The model provides in a single run, a set of nondominated solutions that represent the tradeoff between these two objectives. The model incorporates a multiobjective genetic algorithm and scheduling algorithm. The model initially generates a randomly selected set of solutions that evolves to a near optimal set of tradeoff solutions in subsequent generations. Each solution represents a unique scheduling solution that is associated with certain project duration and a number of interruption days for utilized construction crews. As such, the model provides project planners with alternative schedules along with their expected duration and resource utilization efficiency. KW - Mehragentensystem KW - Lernendes System KW - Infrastruktur Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2135 ER - TY - CHAP A1 - Taha, M. M. Reda A1 - Sherif, Alaa A1 - Hegger, Josef T1 - A nouvelle approach for predicting the shear cracking angle in RC and PC beams using artificial neural networks N2 - The truss model for predicting shear resistance of reinforced concrete beams has usually been criticized because of its underestimation of the concrete shear strength especially for beams with low shear reinforcement. Two challengers are commonly encountered in any truss model and are responsible for its inaccurate shear strength prediction. First: the cracking angle is usually assumed empirically and second the shear contribution of the arching action is usually neglected. This research introduces a nouvelle approach, by using Artificial Neural Network (ANN) for accurately evaluating the shear cracking angle of reinforced and prestressed concrete beams. The model inputs include the beam geometry, concrete strength, the shear reinforcement ratio and the prestressing stress if any. ... KW - Neuronales Netz KW - Wasserbau KW - Scherung KW - Rissbildung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1071 ER - TY - CHAP A1 - Rueppel, Uwe A1 - Meißner, Udo F. A1 - Greb, Steffen T1 - A Petri Net based Method for Distributed Process Modelling in Structural Engineering N2 - The contribution introduces a method for the distributed process modelling in order to support the process orientation in Structural Engineering, i.e., the modelling, analysis and management of planning processes. The approach is based on the Petri Net theory for the modelling of planning processes and workflows in Structural Engineering. Firstly, a central and coarse process model serves as a pre-structuring system for the detailed modelling of the technical planning activities. Secondly, the involved planning participants generate distributed process models with detailed technical workflow information. Finally, these distributed process models will be combined in the central workflow net. The final net is of great importance for the process orientation in Structural Engineering, i.e., the identification, publication, analysis, optimization and finally the management of planning processes. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Petri-Netz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1338 ER - TY - JOUR A1 - Mironov, Vadim A1 - Pahl, Peter Jan T1 - A Prismatic Finite Element for Accurate Arch Dam Analysis N2 - The displacements and stresses in arch dams and their abutments are frequently determined with 20-node brick elements. The elements are distorted near the contact plane between the wall and the abutment. A cantilever beam testbed has been developed to investigate the consequences of this distortion. It is shown that the deterioration of the accuracy in the computed stresses is significant. A compatible 18-node wedge element with linear stress variation is developed as an alternative to the brick element. The shape of this element type is readily adapted to the shape of the contact plane. It is shown that the accuracy of the computed stresses in the vicinity of the contact plane is improved significantly by the use of wedge elements. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Dammbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2467 ER - TY - CHAP A1 - Fahrig, Torsten A1 - Nachtwey, Björn A1 - Gellert, Sebastian T1 - A Product Model based Approach to Interactive CAE Design Optimization N2 - We present a software prototype for fluid flow problems in civil engineering, which combines essential features of Computational Steering approaches with efficient methods for model transfer and high performance computing. The main components of the system are described: - The modeler with a focus on the data management of the product model - The pre-processing and the post-processing toolkit - The simulation kernel based on the Lattice Boltzmann method - The required hardware for real-time computing KW - Produktmodell KW - Simulation KW - Bautechnik KW - Entwurf KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1901 ER - TY - CHAP A1 - Kitagawa, Estuji A1 - Tanaka, Shigenori A1 - Furuta, Hitoshi T1 - A research about the automatic construction of Web/3D model house from 2D digital pictures N2 - In recent years, the survey is performed for repair, such as a bridge and a building built in past, spending great expense. And it is anxious for the survey technique that doesn’t need cost and time more. Then, we made an idea of the technique of precise 3D model creation by 2D pictures. However, the technique of performing the improvement in accuracy of convergent photographing and automatic acquisition of corresponding points was not established. Therefore, in this research, we try to obtain a semi-automation of corresponding points acquisition from initial corresponding points and the improvement in accuracy of convergent photographing. Moreover, we applied the research to the used house of Japanese real estate, and the applicable field was selected as the high needs of the residence of 3D model. And we developed the system that everyone could create Web / 3D model house by VRML easily without requiring expensive apparatuses or expertise. KW - Architektur KW - Verteiltes System KW - Dreidimensionales CAD Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1702 ER - TY - CHAP A1 - Cheng, Jinxing A1 - Lau, Gloria A1 - Law, Kincho T1 - A simulation access language and framework for project management applications N2 - As computer programs become ever more complex, software development has shifted from focusing on programming towards focusing on integration. This paper describes a simulation access language (SimAL) that can be used to access and compose software applications over the Internet. Specifically, the framework is developed for the integration of tools for project management applications. The infrastructure allows users to specify and to use existing heterogeneous tools (e.g., Microsoft Project, Microsoft Excel, Primavera Project Planner, and AutoCAD) for simulation of project scenarios. This paper describes the components of the SimAL language and the implementation efforts required in the development of the SimAL framework. An illustration example bringing on-line weather forecasting service for project scheduling and management applications is provided to demonstrate the use of the simulation language and the infrastructure framework. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Projektmanagement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1567 ER - TY - JOUR A1 - Yabuki, Nobuyoshi A1 - Kotani, Jun A1 - Shitani, Tomoaki T1 - A Steel Bridge Design System Architecture using VR-CAD and Web Service-based Multi-Agents N2 - This paper presents a new design environment based on Multi-Agents and Virtual Reality (VR). In this research, a design system with a virtual reality function was developed. The virtual world was realized by using GL4Java, liquid crystal shutter glasses, sensor systems, etc. And the Multi-Agent CAD system with product models, which had been developed before, was integrated with the VR design system. A prototype system was developed for highway steel plate girder bridges, and was applied to a design problem. The application verified the effectiveness of the developed system. KW - Mehragentensystem KW - Lernendes System KW - Stahlbrücke KW - Virtuelle Realität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2146 ER - TY - JOUR A1 - Koike, Hirotaka A1 - Morimoto, Akinori A1 - Imamura, Maki T1 - A Study on the Relationships of Residential Electricity Consumption and Automobile Energy Consumption with Urban Forms Using GIS N2 - In this Paper, we explored the relation between the electricity consumption in residential sector and the automobile energy consumption in transportation sector in accordance with the location of city by employing Geographic Information System (GIS). We found in the study that the electricity consumption per capita has a tendency that is higher in city center and lower in suburbs in Utsunomiya city. It is also noted that there is little difference among total consumption between city center and suburbs, despite the fact that the density of electric appliances tends to increase in a small size house of city center and the amount of automobile energy consumption from residence is lower in city center than in suburbs. KW - Geoinformationssystem KW - Stadtplanung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2690 ER - TY - CHAP A1 - Jianping, Zhang A1 - Dongping, Xiang A1 - Zhiliang, Ma T1 - A survey on application of information technologies in Chinese construction industry N2 - The construction industry is a supportive industry in China. IT (information technolgy), including computer technology and communication technology, as a whole is regarded as the most important means to upgrade the construction industry so that research projects were organized by Chinese government to further the application of IT in the construction industry. This study originated from one of the projects and is aimed at grasping the general situation on the application of IT in the construction industry. A questionnaire was designed for the survey, which used stratified proportional sampling method, and was carried out under the help of a government agency. This study can not only provide sound foundation for the government to make relative policies, but also reveal references for the firms in construction industry to apply IT in their business. This paper presents the preliminary result of the survey. KW - Architektur KW - Verteiltes System KW - China Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1717 ER - TY - CHAP A1 - Both, Petra von A1 - Kohler, Niklaus A1 - Gessmann, Robin T1 - A virtual life cycle structured platform for building applications N2 - The development of a life cycle structured cooperation platform is described, which is based on an integrated process and goal-oriented project model. Furthermore the structure of a life cycle oriented object structure model and its implementation in the platform are documented. The complete conceptual model is described, which represents the basis of a lifecycle -oriented structuring of the planning object and supports the thematic classification of the object and project management data. KW - Bauwerk KW - Datenmanagement KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1219 ER - TY - CHAP A1 - Thurow, Torsten A1 - Donath, Dirk T1 - A vision of an adaptive geometry model for computer-assisted building surveying N2 - The paper describes a concept for the step-by-step computer-aided capture and representation of geometric building data in the context of planning-oriented building surveying. Selected aspects of the concept have been implemented and tested as prototypes. The process of step-by-step capture and representation is determined by the order in which the user experiences the building. Only the information that the user knows (can see) or can reasonably deduce is represented. In addition approaches to the flexible combination of different measuring techniques and geometric abstractions are described which are based upon geodetic computational adjustment. KW - Architektur KW - Verteiltes System KW - Bauaufnahme Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1722 ER - TY - CHAP A1 - Menzel, Karsten A1 - Dittrich, Jörg A1 - Domschke, Sven T1 - About the implantation process of mobile computing in AEC N2 - The AEC industry is conscious of the potentials arising from the usage of mobile computer systems to increase productivity by streamlining their business processes. Discussions are no longer on whether or not to use a mobile computer solution, but rather, on how it should be used. However, the implantation process of this new technology in Architecture, Engineering and Construction (AEC) and Facility Management (FM) practise is very slow and should be improved. One way to encourage and ease the usage of mobile computer systems in AEC is a more process-oriented usability and context appropriateness of mobile computer solutions. Context-sensitivity is defined as a crucial feature to be taken into account for further research in the area of Mobile Computing. Context-sensitive, mobile IT-solutions depend on two features: (1) flexible definitions of (construction) processes describing the context and (2) tools for flexible, multi-dimensional information management representing the context. It is on this premise that the authors propose the n-dimensional data management approach for the implementation of mobile computing solutions. In this paper, we analyse working scenarios in the AEC and FM sector, defining context aspects which are transformed and formalized as dimension hierarchies of the envisaged context model. KW - Mobile Computing KW - Funknetz KW - Bauwesen Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1106 ER - TY - JOUR A1 - Huhn, Michael T1 - Abstract and Concrete Scenarios in Concurrent Engineering N2 - An architecture of a distributed planning system for the building industry has been developed. The emphasis is on highly collaborative environments in steelwork, timber construction etc. where designers concurrently handle 3D models. The overall system connects local design systems by the so-called Design Framework DFW. This framework consists of the definition of distributed components and protocols which make the collaborative design work. The process of collaborative design has been formalized on an abstract level. This paper describes how this has been done. A sample is given to illustrate the mapping of concrete scenarios of the ‘real design world’ to an abstract scenario level. This work is funded by the Deutsche Forschungsgemeinschaft DFG as part of the project SPP1103 (Meißner et al. 2003). KW - Produktmodell KW - Bautechnik KW - Forschungskooperation KW - Framework Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2068 ER - TY - CHAP A1 - Katzenbach, Rolf A1 - Meißner, Udo F. A1 - Rueppel, Uwe T1 - Abstraction of Process Relevant Information from Geotechnical Standards and Regulations N2 - The paper presents the abstraction of process relevant information in order to enable the workflow management based on semantic data. It is shown for three examples, how the standards define the information needed to perform a certain planning activity. Abstraction of process relevant information is discussed for different granularities of the underlying processmodel. As one possible application ProMiSE is introduced, which uses process relevant data in individual tokens in a petri-net based process-model. KW - Geotechnik KW - Prozessmodell KW - Normung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111028-1002 ER - TY - JOUR A1 - Albert, Andrej A1 - Freischlad, Mark A1 - Pullmann, Torben T1 - Acquisition of Conceptual Design Knowledge in Structural Engineering N2 - Expert systems integrating fuzzy reasoning techniques represent a powerful tool to support practicing engineers during the early stages of structural design. In this context fuzzy models have proved themselves to be very suitable for the representation of complex design knowledge. However their definition is a laborious task. This paper introduces an approach for the design and the optimization of fuzzy systems based upon Genetic Programming. To keep the emerging fuzzy systems transparent a new framework for the definition of linguistic variables is also introduced. KW - Mehragentensystem KW - Lernendes System KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2154 ER - TY - JOUR A1 - Lee, Kangkun A1 - Lee, Kijang T1 - Additional bending moment for shear-lag phenomenon in tube structures N2 - Framed-tube system with multiple internal tubes is analysed using an orthotropic box beam analogy approach in which each tube is individually modelled by a box beam that accounts for the flexural and shear deformations, as well as the shear-lag effects. A simple numerical modeling technique is proposed for estimating the shear-lag phenomenon in tube structures with multiple internal tubes. The proposed method idealizes the framed-tube structures with multiple internal tubes as equivalent multiple tubes, each composed of four equivalent orthotropic plate panels. The numerical analysis is based on the minimum potential energy principle in conjunction with the variational approach. The shear-lag phenomenon of such structures is studied taking into account the additional bending moments in the tubes. A detailed work is carried out through the numerical analysis of the additional bending moment. The moment factor is further introduced to identify the shear lag phenomenon along with the additional moment. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Hochhaus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2472 ER - TY - CHAP A1 - Fruchter, Renate A1 - Chao, Yunn Chyi T1 - AEC Global Teamwork: Emergent Work Processes N2 - This ethnographic study reports on emerging work processes and practices observed in the AEC (Architecture/Engineering/Construction) Global Teamwork program, i.e., what people experience when interacting with and through collaboration technologies, why people practice in the way they do, how the practice fits into the environment and changes the work patterns. It presents the experience of two high-performance typical but extreme AEC teamwork cases adopting and adapting to collaboration technologies and how these technologies in practice impact their work processes. The findings illustrate the importance of collaboration technologies in cross-disciplinary, global teamwork. Observations indicate that high performance teams that use the collaboration technologies effectively exhibit collaboration readiness at an early stage and manage to define a “third way” to meet the demands of the cross-disciplinary, multi cultural and geographically distributed AEC workspace. The observations and implications represent the blueprint for yearly innovations and improvements to the design of the AEC Global Teamwork program. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Computer Supported Cooperative Work Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1912 ER - TY - CHAP A1 - Olivier, A. H. T1 - An application-centred framework for distributed engineering applications N2 - The conceptual structure of an application that can support the structural analysis task in a distributed collaboratory is described in (van Rooyen and Olivier 2004). The application described there has a standalone component for executing the finite element method on a local workstation in the absence of network access. This application is comparable to current, local workstation based finite element packages. However, it differs fundamentally from standard packages since the application itself, and its objects, are adapted to support distributed execution of the analysis task. Basic aspects of an object-oriented framework for the development of applications which can be used in similar distributed collaboratories are described in this paper. An important feature of this framework is its application-centred design. This means that an application can contain any number of engineering models, where the models are formed by the collection of objects according to semantic views within the application. This is achieved through very flexible classes Application and Model, which are described in detail. The advantages of the application-centred design approach is demonstrated with reference to the design of steel structures, where the finite element analysis model, member design model and connection design model interact to provide the required functionality. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Framework Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1353 ER - TY - CHAP A1 - Gordon, Chris A1 - Akinci, Burcu A1 - Garrett, James H. T1 - An Approach for Planning Sensor-Based Inspection of the Built Environment N2 - The promise of lower costs for sensors that can be used for construction inspection means that inspectors will continue to have new choices to consider in creating inspection plans. However, these emerging inspection methods can require different activities, resources, and decisions such that it can be difficult to compare the emerging methods with other methods that satisfy the same inspection needs. Furthermore, the context in which inspection is performed can significantly influence how well certain inspection methods are suited for a given set of goals for inspection. Context information, such as weather, security, and the regulatory environment, can be used to understand what information about a component should be collected and how an inspection should be performed. The research described in this paper is aimed at developing an approach for comparing and selecting inspection plans. This approach consists of (1) refinement of given goals for inspection, if necessary, in order to address any additional information needs due to a given context and in order to reach a level of detail that can be addressed by an inspection activity; (2) development of constraints to describe how an inspection should be achieved; (3) matching of goals to available inspection methods, and generation of activities and resource plans in order to address the goals; and (4) selection of an inspection plan from among the possible plans that have been identified. The authors illustrate this approach with observations made at a local construction site. KW - Monitorüberwachung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1500 ER - TY - CHAP A1 - Scheer, Sergio A1 - Dos Santos, Aguinaldo A1 - Hinks, John T1 - An approach for promoting knowledge exchange on production practices through the Internet N2 - Recent research shows that current learning strategies in construction industry have not been effective in implementing lean principles in construction. With that in mind the researchers set to investigate an alternative learning strategy in order to promote learning at the international level. A web-based environment, was developed for this project with the intent of promoting learning and knowledge exchange on the theory and practice of "process transparency" across different countries. KW - Bautechnik KW - Computerunterstütztes Lernen KW - Wissensverarbeitung KW - pull learning KW - transparency KW - knowledge exchange KW - web-based learning Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-821 ER - TY - CHAP A1 - Ma, Zhiliang A1 - Wong, K. D. A1 - Yang, Jun T1 - An Approach to Utilizing Exchanged Documents in Construction Projects Based on Data Warehouse Technology N2 - There are many construction projects in China and mass documents are exchanged among the multi-party, including the owner, the contractor and the engineer in the projects. Based on previous studies, an approach to the utilization of the exchanged documents is established by using data warehouse technology and a prototype system called EXPLYZER is developed. The approach and the prototype system are verified through their application in a construction project. It is concluded that the approach can support the decision-making in project management. KW - Bauwerk KW - Datenmanagement KW - Data-Warehouse-Konzept KW - Exchanged Documents KW - Managment Information System Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1227 ER - TY - CHAP A1 - O'Brien, William A1 - El-Mashaleh, Mohammad T1 - An Empirical Study Relating Construction Firm Performance and IT Utilization N2 - This paper examines the impact of information technology (IT) utilization on construction firm performance. Based on empirical data collected from 74 US construction firms, the analyses provide evidence that IT has a positive impact on overall firm performance, schedule performance, and cost performance. Firm performance is a composite score of several metrics of performance: schedule performance, cost performance, customer satisfaction, safety performance, and profit. No relationship is found between IT utilization and customer satisfaction, safety, or profit, although this may be due to limitations of the study given strong correlations between IT utilization and cost and schedule performnance. The empirical evidence of positive association between performance and IT use provided by this research is significant to both construction practice and research literature. This evidence should encourage firms to adopt and invest in IT tools. KW - Architektur KW - Verteiltes System KW - Informationstechnik KW - Unternehmen Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1739 ER - TY - JOUR A1 - Yabuki, Nobuyoshi A1 - Yoshimura, Yutaka T1 - An Evaluation System for Steel Structures of Hydroelectric Power Stations based on Fault Tree Analysis and Performance Maps N2 - This paper presents an evaluation system for steel structures of hydroelectric power stations, including hydraulic gates and penstocks, based on Fault Tree Analyasis (FTA) and performance maps. This system consists of fault tree diagrams of FTA, performance maps, design and analysis systems, and engineerin databases. These four modules are integrated by appropriate hyperlinks so that the user of this system can use it easily and seamlessly. A well developed system was applied to some illustrative example cases, and they showed that the developed methodology and system worked well and the users found the system useful and effective for their maintenance tasks at powerstations. KW - Wissensmanagement KW - Stahlbau KW - Wasserkraftwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2564 ER - TY - CHAP A1 - Lau, Gloria A1 - Law, Kincho T1 - An Information Infrastructure for Comparing Accessibility Regulations and Related Information from Multiple Sources N2 - This paper describes a research project that addresses the difficulties in dealing with regulatory documents such as national and regional codes. These documents tend to be voluminous, heavily cross-referenced, possibly ambiguous and even conflicting at times. There are often multiple documents that need to be consulted and satisfied; however it is a difficult task to locate all of the relevant provisions. In addition, sections dealing with the same or similar conceptual ideas sometimes lay down conflicting requirements. We propose a framework for regulation representation, analysis and comparison with emphasis on the extraction of similarities between provisions. We focus on accessibility regulations, whose intent is to provide the same or equivalent access to a building and its facilities for disabled persons. An XML regulatory repository is developed to extract structural as well as non-structural features from government regulations to help user understanding and computational analysis. A similarity analysis is performed between different sources of regulations. In order to achieve a better comparison between provisions, we employ a combination of feature matching and structural analysis. Results are shown on comparisons between American and European codes, as well as on the domain of electronic-rulemaking. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Wissensmanagement KW - Standardisierung KW - Behinderte Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1922 ER - TY - CHAP A1 - Raue, Erich A1 - Weitzmann, Rüdiger T1 - Analysis and Design of Hybrid Structures using Optimization Strategies N2 - The paper gives a general overview and concerns with a specified set of computer-aided analysis modules for hybrid structures loaded by extreme excitations. All problems are solved by methods of linear, quadratic or nonlinear mathematical optimization, that leads to very effective and economic design solutions. All approaches are derived from general optimization problem that can be easily altered to conform to specific design tasks. Some advantages and possibilities of hybrid structural modeling (single or mixed model-supported) are discussed. The methods will be illustrated by an example structure and optimization schemes. KW - Konzipieren KW - Bauwerk KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1023 ER - TY - JOUR A1 - van Treeck, Christoph A1 - Rank, Ernst T1 - Analysis of building structure and topology based on Graph Theory N2 - Individual views on a building product of people involved in the design process imply different models for planning and calculation. In order to interpret these geometrical, topological and semantical data of a building model we identify a structural component graph, a graph of room faces, a room graph and a relational object graph as aids and we explain algorithms to derive these relations. The application of the technique presented is demonstrated by the analysis and discretization of a sample model in the scope of building energy simulation. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Graphentheorie KW - Ingenieurbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2308 ER - TY - JOUR A1 - Chang, Chihyuan A1 - Chang, Yuanchu A1 - Huang, Shyhmeng T1 - Application of a Agent Mechanism to the Small-scale Maintenance of School Buildings N2 - This paper presents an agent-based software, Virtual Administrator System (VAS) for the smallscale maintenance of school buildings. VAS is capable of handling a heavy load of routine, lowtech maintenance jobs. It assigns a different priority to each job application according to its significance and urgency, and automatically adjusts schedules for maintenance engineers when on-site supervision is needed. The system can help ease off the burden of routine small-scale maintenance work, making it more cost-effective and efficient in the overall management of school building maintenance. VAS posts jobs on the Web in a multi-media format and classified all applications into four categories: the on-call maintenance contract, the term maintenance contract, the guaranty maintenance contract, and the regular maintenance contract. It then estimates their urgency level and passes the information to maintenance engineers who will decide whether on-site inspection is needed. Based on the engineers’ feedback, VAS automatically implements the scheduling for inspection as well as sends out real-time or batch notifications to contractors. All these activities are recorded in a database to allow continuous research and data mining and the analysis and diagnosis of specific jobs for followup maintenance plans. KW - Mehragentensystem KW - Lernendes System KW - Schulgebäude KW - Facility-Management Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2165 ER - TY - JOUR A1 - Most, Thomas A1 - Eckardt, Stefan T1 - Application of a hybrid parallelization technique to accelerate the numerical simulation of nonlinear mechanical problems N2 - This paper presents the combination of two different parallelization environments, OpenMP and MPI, in one numerical simulation tool. The computation of the system matrices and vectors is parallelized with OpenMP and the solution of the system of equations is done with the MPIbased solver MUMPS. The efficiency of both algorithms is shown on several linear and nonlinear examples using the Finite Element Method and a meshless discretization technique. KW - Framework KW - API KW - Parallelverarbeitung KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2599 ER - TY - CHAP A1 - Jianping, Zhang A1 - Tianyi, Ma A1 - Qiping, Shen T1 - Application of Data Warehouse and Data Mining in Construction Management N2 - All construction project are constrained by their schedules, budgets and specifications, and safety and environmental regulations. These constraints made construction management more complex and difficult. At the same time, many historical data that can support the decisions in the future are kept in construction enterprises,. To use the historical data effectively and efficiently, it is essential to apply the data warehouse and data mining technologies. This paper introduces a research which aims to develop a data warehouse system according to the requirements of construction enterprises and use data mining technology to learn useful information and knowledge from the data warehouse system. The design, the development and the application of this system are detailedly introduced in this paper. KW - Bauwerk KW - Datenmanagement KW - Data-Warehouse-Konzept Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1247 ER - TY - JOUR A1 - Melnikov, B. E. A1 - Semenov, Artem T1 - Application of Multimodel Method of Elasto-Plastic Analysis for the Multilevel Computation of Structures N2 - Creation of hierarchical sequence of the plastic and viscoplastic models according to different levels of structure approximations is considered. Developed strategy of multimodel analysis, which consists of creation of the inelastic models library, determination of selection criteria system and caring out of multivariant sequential clarifying computations, is described. Application of the multimodel approach in numerical computations has demonstrated possibility of reliable prediction of stress-strain response under wide variety of combined nonproportional loading. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Elastoplastizität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2487 ER - TY - THES A1 - Bock, Sebastian T1 - Approximation mit polynomialen Lösungen der Laméschen Differentialgleichung T1 - Approximation with Polynomial Solutions of Lamé Differential Equation N2 - Grundidee der Arbeit ist es, Lösungen von Randwertaufgaben durch Linearkombinationen exakter klassischer Lösungen der Differentialgleichung zu approximieren. Die freien Koeffizienten werden dabei durch die Bestimmung der besten Approximation der Randwerte berechnet. Als Basis der Approximation werden vollständige orthogonale und nahezu orthogonale Funktionensysteme verwendet. Anhand ausgewählter Beispiele mit Randvorgaben unterschiedlicher Glattheit wird am Beispiel der Kugel die prinzipielle Anwendbarkeit der Methode getestet und hinsichtlich der Entwicklung des Fehlers der Näherungslösung, der Stabilität des Verfahrens und des numerischen Aufwandes untersucht. Die erhaltenen Resultate geben einen begründeten Anlass, die Anwendung der Methode als Bestandteil einer hybriden analytisch-numerischen Methode, insbesondere der Verknüpfung mit der FEM, weiterzuverfolgen. KW - Legendre-Funktion KW - Lamé-Gleichung KW - Festkörpermechanik KW - Orthonormalbasis KW - Beste Approximation KW - Fourier-Reihe KW - Hyperholomorphe-Funktion KW - spherical harmonics KW - Lamé-equation KW - continuum mechanic KW - complete orthonormal system KW - best approximation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6409 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - THES A1 - Nguyen, Thu Huong T1 - Architektonische Grundlage für die Entwicklung von barrierefreien berufsbildenden Schulen für die Integration von Seh- und Mobilitätsbehinderten sowie nichtbehinderten Menschen in Vietnam T1 - Architectural Standard for Accessibility of mobile and visually impaired students in vocational schools - Vietnam N2 - Im Gegensatz zu Industrieländern wird das barrierefreie und behindertengerechte Planen und Bauen von öffentlichen Gebäuden in Entwicklungsländern aus wirtschaftlichen und sozialen Gründen nur ungenügend berücksichtigt und realisiert. Die Analyse von international vorhandenen Normen und Richtlinien zeigte, dass in Vietnam die Integration behindertengerechter Konzepte in Bauplanungen erst seit dem Jahr 2002 stattfindet, wohingegen diese in China bereits seit den 80er Jahren und in den Industrienationen wie Deutschland und Amerika sogar schon seit drei Jahrzehnten Anwendung findet. Die ungenügende Berücksichtigung behindertengerechter Baukonzepte in öffentlichen Einrichtungen, so auch vor allem in Berufsschulen bewirkt eine drastische Reduzierung des Ausbildungsplatzangebotes und eine resultierende Perspektivlosigkeit für behinderte Menschen. Durch die schnelle Errichtung barrierefreier, behindertengerechter Ausbildungseinrichtungen sollen sich die Chancen auf einen Ausbildungsplatz für behinderte Vietnamesen deutlich verbessern. Mit dem Erhalt eines Ausbildungsplatzes wird diesen Menschen nicht nur eine Integration in die Gesellschaft sondern langfristig gesehen auch finanzielle Selbständigkeit und somit Unabhängigkeit von der Familie ermöglicht. Als Grundlage des angestrebten Umwandlungsprozesses von der herkömmlichen barrierebelasteten Bauplanung zur Berücksichtigung von behinderten Menschen durch behindertengerechte Planungskonzepte wurden Bauzeit, Bauumfang und Baukosten eingehend analysiert. Dieser vergleichenden Betrachtung der Bauplanungen entwuchsen zwei neue barrierefreie Berufschultypen. Der neue Berufsschultyp 1 – Der Dezentralisierungstyp zeichnet sich durch einen geringfügigen Bauumfang und durch seine einfache Baukonstruktion aus und ermöglicht somit eine schnelle Reaktion auf den gravierenden Ausbildungsplatzmangel für behinderte Menschen. Dieser kostengünstige Berufsschultyp wurde entwickelt, um sehr kurzfristig eine schnelle Erhöhung des Ausbildungsplatzangebotes für behinderte Menschen zu schaffen. Siedlungs- und Wohngebiete bzw. Dörfer eignen sich am besten als Standort für den Berufsschultyp 1. Das ursprüngliche Wohnumfeld bliebe den behinderten Schülern erhalten und damit einhergehend auch die seelische Unterstützung durch deren Familien. Der familiennahe Standort der Berufsschule würde somit sowohl den Lehrern als auch den Schülern eine große seelische Last abnehmen. Des Weiteren ließe sich eine Berufsschule vom Typ 1 schnellstens errichten, so dass die Ausbildung der behinderten und nicht behinderten Schüler sofort aufgenommen werden könnte. Im Zuge der Entwicklung des neuen Berufsschultyps 2 – Dem Zentralisierungstyp - wurden internationale Standards angestrebt. Dieser Berufsschultyp bietet eine umfangreichere Flexibilität in seiner Nutzungsart, ein umfassenderes Angebot an Ausbildungsgängen und ein weitaus größeres Feld der Integration. Der Berufsschultyp 2 ist ein komplexer Bau, mit einem größeren Bauumfang als Berufsschultyp 1. Bei der Errichtung dieser Berufsschultypen ist mit einer langfristigen Planungs- und Bauzeit zu rechnen. Der Stadtrand wird als der optimale Standort zur Errichtung der Berufsschule vom Typ 2 angesehen. Von dort aus ließen sich die öffentlichen Service der Stadt effizient nutzen. Als Bewertungsgrundlage für eine optimale Entwicklung der beiden neuen Berufsschultypen dienen Basisdaten aus umfassenden Analysen über verschiedenste Betrachtungsebenen. Unter Nutzung der in Deutschland und USA bestehenden gesetzlichen Grundlagen sollen barrierefreie Planungsempfehlungen, gezielt für die Errichtung behindertengerechter berufsausbildender Schulen in Vietnam, abgleitet werden, um ein gemeinsames Lernen von seh- und mobilitätsbehinderten sowie von nicht behinderten Menschen zu ermöglichen. Bei den Planungsempfehlungen finden nicht nur die unterschiedlichen menschlichen Körpergrößen der verschiedenen Bevölkerungsgruppen sondern auch die unterschiedliche Lebensweise der Vietnamesen sowie die Klimabedingungen in Vietnam Berücksichtigung. Bei der Planung von behindertengerechten Ausbildungs- und Schuleinrichtungen ist es wichtig, die Körpergröße der Menschen des jeweiligen Landes zu berücksichtigen. Als Orientierungsmaß für die Körpergröße vietnamesischer Menschen wurde ein Richtfaktor definiert und eingesetzt. Anhand der o.g. Richtfaktorgrößen wurden detaillierte Planungsempfehlungen für barrierefreies Lernen und Wohnen herausgearbeitet. N2 - As Vietnam braces to deal with development pressures and economic issues the plight of the handicapped population remains largely unrecognized. A large segment (7%) of the population is devoid of any benefits from social policies that are seen in the West. One of the purposes of doing this thesis is to study this segment of the population, and develop an approach that is practical for Vietnam, to provide facilities for uplifting this disabled populace. I hope it acts as a guide or a framework for the planners in Vietnam for improving the potential of the disabled in the workforce. Throughout the body of work presented i have tried to compare and assess elements in Western conditions and Vietnam and have tried to draw conclusions on applicable and practical concepts that can be implemented in Vietnam. KW - Berufsschule KW - Barrierefreiheit KW - Vietnam KW - Schüler / Behinderung KW - Behinderter KW - Behindertengerechtes Bauen KW - Accesible KW - Vocational KW - School KW - Vietnam Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050707-6857 ER - TY - THES A1 - Schweigel, Stefan T1 - Aufnahme des Baufortschritts in verteilter Umgebung N2 - Als Folge des hohen Termindrucks während des Bauablaufes, ist es besonders wichtig den Fortschritt eines Bauvorhabens zeitnah zu überwachen. Auf Großbaustellen kann die effektive Kontrolle nicht mehr ohne technische Hilfsmittel durchgeführt werden. Die Arbeit stellt verschiedene Szenarien für die verteilte Fortschrittserfassung vor und untersucht welche Anforderungen an ein System für die verteilte Erfassung gestellt werden. Dazu wird zuerst das bestehende CVS-System analysiert, um anschließend daraus ein Konzept für die Versionierung von Objekten und den automatischen Abgleich von Objektversionen zu entwickeln. Später wird gezeigt, wie dieses Konzept mit Hilfe von C# und dem Microsoft®-.NET-Framework umgesetzt werden kann. KW - Computer Supported Cooperative Work KW - Versionsverwaltung KW - CVS KW - Microsoft dot net KW - computergestützte Baufortschrittskontrolle KW - Versionskontrolle KW - Objektversionierung KW - Versionsabgleich KW - Versionsverschmelzung KW - Computer Aided Progress Monitoring KW - reconciliation KW - merge KW - concurrency control KW - versions Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1534 ER - TY - JOUR A1 - Kang, Shihchung A1 - Miranda, Eduardo T1 - Automated Simulation of the Erection Activities in Virtual Construction N2 - The goal of the research is the development of a computer system to plan, simulate and visualize erection processes in construction. In the research construction cranes are treated as robots with predefined degrees of freedom and crane-specific motion planning techniques are developed to generate time-optimized and collision-free paths for each piece to be erected in the project. Using inverse kinematics and structural dynamics simulation, the computer system then computes the crane motions and velocities necessary to achieve the previously calculated paths. The main benefits of the research are the accurate planning and scheduling of crane operations leading to optimization of crane usage and project schedules, as well as improving overall crane safety in the project. This research is aimed at the development of systems that will allow computer-assisted erection of civil infrastructure and ultimately to achieve fully-automated erection processes using robotic cranes... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Baukonstruktion KW - Virtuelle Realität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2310 ER - TY - JOUR A1 - Erlemann, Kai T1 - BABSIM - An object-oriented software framework for microscopic simulation of freeway traffic N2 - A wide variety of behavioural models exist in microscopic traffic simulation. Commercial programms often use closed-source policies and are confined to their respective simulation platforms. Open-source approaches mainly focus on distinctive, highly specialized traffic situations. In the scope of this paper, an open-source framework for developing modular, objectoriented simulation systems is presented, capable of simultaneously accommodating different driving models and enabling the user to modify and extend the catalogue of driving behaviours. The existing driving behaviours and the computational implementation of the simulation are being described. KW - Framework KW - API KW - Verkehrsplanung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2601 ER - TY - THES A1 - Adami, Kay T1 - Beitrag zur physikalisch nichtlinearen Analyse von Aussteifungssystemen mit Methoden der mathematischen Optimierung T1 - Physically non-linear analysis of structural systems by methods of mathematical programming N2 - Das Ziel der vorliegenden Arbeit besteht in der Entwicklung einer Strategie zur physikalisch nichtlinearen Analyse von Aussteifungssystemen. Der Anwendungsschwerpunkt umfasst neben dem traditionellen Aufgabenumfang zur Analyse neu zu errichtender Tragwerke gleichzeitig auch Planungsaufgaben, die mit Umbau- und Sanierungsmaßnahmen verbunden sind. Veränderungen, die sich während der Nutzungsgeschichte oder im Revitalisierungsprozess ergeben, werden in den Berechnungsmodellen berücksichtigt. In vielen Fällen ist es aus planerischer Sicht zweckmäßig, die Nichtlinearität des Materialverhaltens zur Erschließung von Tragreserven in den normativen Nachweiskonzepten mit einzubeziehen. Der damit verbundene numerische Aufwand wird durch die Verwendung separater Modelle zur Erfassung des Querschnitts- und des Systemtragverhaltens begrenzt, ohne die Komplexität der Aufgabenstellung zu reduzieren. Aus detaillierten Querschnittsuntersuchungen der Tragwände werden integrale Materialbeziehungen abgeleitet, welche die Grundlage für die nichtlineare Tragwerksanalyse darstellen. Die Modellbildung gegliederter Aussteifungswände basiert auf deren Zerlegung in ebene finite Stabsegmente, die sich durch die Diskretisierung in Längs- und in Querrichtung ergeben. Zusätzlich zu den an den Stabenden angreifenden Normalkräften, Querkräften und Biegemomenten werden an den Elementlängsrändern Schubbeanspruchungen erfasst. Die physikalische Nichtlinearität wird durch die Einbeziehung integraler Materialbeziehungen an den Segmenträndern berücksichtigt. Die numerische Umsetzung erfolgt mit Methoden der mathematischen Optimierung. Die Leistungsfähigkeit der Berechnungsstrategie wird exemplarisch anhand von Untersuchungen an Aussteifungssystemen in Großtafelbauweise nachgewiesen. N2 - In this thesis a strategy to physically non-linear analysis of multi-storey buildings will be developed. With respect to reconstruction and revitalisation the structural system as well as the loadings can be modified. If the determination of internal forces is based on the assumption of linear elastic material behaviour, the bearing capacity of the structural system will be often not checkable. In this context it is reasonable to use models, which include non-linear effects. The investigated wall assemblies are subdivided into elementary wall elements, normally rectangular. At the edges of elements shear forces secures the compatibility between the individual walls. The physically non-linearity will be included by multi-linear material laws. The mechanical problem for determination of internal forces und deformations will be formulate as extremum principle with contraints. The mechanical model presented in this thesis shall be demonstrate on a structural system of large planel structure. KW - Stahlbeton KW - Nichtlineare Berechnung KW - Optimierung KW - Extremalprinzip KW - Revitalisierung KW - Aussteifungssystem KW - Großtafelbauweise KW - physikalisch nichtlinear KW - concrete KW - physically non-linear analysis KW - mathematical programming KW - revitalisation KW - large panel buildings Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040329-812 ER - TY - THES A1 - Wuttke, Frank T1 - Beitrag zur Standortidentifizierung mit Oberflächenwellen T1 - Site identification using surface waves N2 - In der Dissertation wurden unterschiedliche Methoden zur Standortidentifizierung mit Oberflächenwellen analysiert. Es wurden neue Methoden zur Parameteridentifikation unter Nutzung von Oberflächenwellen vorgeschlagen. Die Ziele der Arbeit können wie folgt definiert werden: a) Die Entwicklung eines geeigneten theoretischen Modells als Grundlage zur Untersuchung des Standortes hinsichtlich vorhandener Bodensteifigkeiten. b) Die Entwicklung einer neuen Inversionsmethodik unter Berücksichtigung aller auftretenden Moden im Oberflächenwellenfeld. Die Erstellung eines Modells des vertikal heterogenen Untergrundes erfolgte im Frequenz-bereichs für beliebig geschichtete Böden, aufbereitet durch weitestgehend analytische Formulierungen. Durch Nutzung beliebiger horizontaler, elastisch-isotroper Schichten konnte die vertikale Heterogenität approximiert werden. Die Definition der Green'schen Funktionen wurde in Form der Reflexions- und Transmissionskoeffizienten durchgeführt. Die Lösung des formulierten Halbraumproblems erfolgte unter Verwendung der Konturintegration. Dazu wurde die Vorgehensweise der bestehenden Lösung des homogenen Halbraums auf das Problem des geschichteten Mediums übertragen. Die daraus sich ergebende Lösung ist in ein Körperwellen- und ein Oberflächenwellenfeld separiert. Der Vorteil dieser analytischen Betrachtungsweise liegt in der eindeutigen Zuordnungsmöglichkeit der erhaltenen Lösungen zu Wellentypen und in der klaren Dispersionscharakteristik der berechneten Modelle. Im Gegensatz dazu liefern numerische Lösungen, wie FEM, immer ein Wellenfeld, in dem die Wellentypen zugeordnet bzw. interpretiert werden müssen. Mit Hilfe der synthetischen Bodenmodellierung wird das Verhalten von geschichteten Böden bei durchlaufenden Oberflächenwellenfeldern simuliert und untersucht. Für die Untersuchung der Profile wurde hauptsächlich die Modale Superposition von Oberflächenwellen und die Wellenzahl-Integration verwendet. Bei der Analyse von Oberflächenwellenfeldern in vorhandenen Medien sind abweichend von den üblichen seismischen Methoden spezielle Untersuchungsmethoden zur Ermittlung der vorhandenen Dispersion notwendig. Zur Durchführung der Dispersionsanalyse wird in geotechnischen Untersuchungen in der Regel das Phasen-Differenzen-Verfahren (SASW) genutzt. Aufgrund der beschränkten Aussagefähigkeit dieses Verfahrens zu auftretenden höheren Moden werden verbesserte Analysemethoden zur experimentellen Auswertung hinzugezogen. Diese Methoden nutzen zur Informationsgewinnung das räumlich ausgedehnte Wellenfeld. Ausgehend von dem Dispersionsverhalten kann die Bodenstruktur mittels inverser Methoden bestimmt werden. Für die gemeinsame Inversion der in den Messungen vorhandenen Moden wurde ein entsprechendes Inversionsverfahren abgeleitet. Als Grundlage der Inversion wurde ein Verfahren des kleinsten Fehlerquadrates gewählt. Der Vorteil hinsichtlich einer effizienten und stabilen Inversion unter Nutzung dieser Methodik überwiegt den Nachteil der lokalen Suche nach dem Fehlerminimum. Zum Erreichen der stabilen und zielgerichteten Inversion wird der Levenberg-Marquardt Algorithmus, zusammen mit der Wichtung der Dispersionsäste entsprechend ihres Anregungsverhaltens in den Dispersionsspektren, eingesetzt. Von Vorteil hat sich innerhalb der Arbeit die gleichzeitige Behandlung von theoretischen und experimentellen Parameterstudien erwiesen, da sich Ergebnisse und Erkenntnisse beider Seiten ergänzten. Eine Interpretation von Felddaten kann damit weitaus sicherer durchgeführt werden. Zusätzlich konnten die erarbeiteten experimentellen und theoretischen Verfahren gegenseitig überprüft werden. N2 - In this thesis various available methods for the site identification with surface waves were analyzed. Some new methods are proposed for the site identification using surface wave characteristics. The objectives of the thesis are as follows: a) To develop an appropriate theoretical model that can work in conjunction with the results obtained from the site inverstigations to precisely identify the actual in situ stiffness profiles. b) To develop a new inversion procedure that enables to inverse all the appearing modes in a wave field. An appropriate model should be able to define the vertical heterogeniety of the subsoil. In this study, the existing solution for the homogeneous half space was extended to the stratified medium. An analytical formulation in the frequency domain was used for this purpose by considering arbitrary horizontal, elastic isotropic layers. The Green’s functions were defined in the matrix formulation in the form of reflection- and transmission coefficients. In this way the analytical considerations could be carried out in a strong mathematical procedure. The solution for the forced excited layered half space was obtained following the contour integration. The solution could be separated in to the body wave and the surface wave fields. The advantage of such an analytical approach lies in the definite allocation of the preserved solutions for wave types and the straight dispersion characteristic of the calculated models. The difference between the analytical and the numerical solutions, such as using FEM, is that the interpretation of the calculated wave field is not required in the former, whereas it is necessary in the latter case. With the help of an analytic wave field calculation the behavior of the propagate surface wave fields in the stratified media could be better simulated and examined. For the investigation of the stiffness profiles primarily the modal superposition by surface waves and the wave number-integration were used. Special surface wave field investigation methods were necessary for the determination of the available dispersion characterisic. For the realization of the dispersion analysis in geoengineering investigations the phase difference method (SASW) is a widely used tool. Since the information on the higher modes are limited, an improved method is proposed to separate the different modes from the experimental data. The proposed method used the spatially spread wave field for the dispersion information. The soil structure can be determined by using various inverse methods. For the joint inversion of all the available modes in the measurements, a suitable inversion procedure was derived. For the stabilization of the inversion procedure, a least square method was chosen. The disadvantage of this efficient method is a local minimum search of the objective function. To achieve a stable and focused inversion procedure the Levenberg-Marquardt algorithm was used. The different dispersion branches multiplied by weighting factors corresponds to the excitation behavior in the dispersion spectra. One particularly advantage in the work is the concurrent treatment of theoretical and experimental parameter studies. According this treatment, the results and cognitions of both sides were complementary. An interpretation of field data could be carried out reliably. In addition, the compiled experimental and theoretical procedures could be checked mutually. KW - Inversionsalgorithmus KW - Inversionstheorie KW - Wellenausbreitung KW - Anomale Dispersion KW - Dispersion KW - Energieübertragung KW - wave propagation KW - inversion procedure KW - inversion theorie KW - wave field dispersion Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050708-6874 ER - TY - THES A1 - Kanzow, Ulrich Michael T1 - Beschreibung des Fließwiderstandes in der numerischen Berechnung von Gerinnen mit extremer relativer Rauheit T1 - Description of flow resistance in numerical simulation of channels with extreme relative roughness N2 - Die ein- und zweidimensionale numerische Berechnung der Fließvorgänge in offenen Gerinnen findet zunehmend auch Anwendung in der Modellierung immer komplexerer Prozesse im unter Anderem im Bereich der Ökosystemmodellierung in Gebirgs- und Mittelgebirgsbächen. In diesem Bereich existieren zurzeit noch Probleme hinsichtlich der hydraulischen Prognoserechnungen. Neben den numerischen Grundlagen werden die Abhängigkeiten des Strömungsfeldes von der Rauheitsstruktur der Sohle und der Überdeckungshöhe behandelt. Zur Untersuchung der Fließwiderstandsgleichungen wurden Laborversuche in einer Versuchsrinne durchgeführt. Es wird gezeigt, dass der üblicherweise verwendete Ansatz des mittleren Sohlgefälles bei der Berechnung der Sohlschubspannungsgeschwindigkeit u* in Stufen-Becken-Sequenzen nicht zulässig ist. Stattdessen ist es erforderlich, die lokalen Energieliniengefälle zu bestimmen und einzusetzen. Die Anwendung der aus der Literatur bekannten Ansätze zur Beschreibung des Fließwiderstandes führt zu keinen befriedigenden Ergebnissen und wird ausführlich diskutiert. In der Untersuchung der verschiedenen Fließwiderstandsbeziehungen zeigte sich, dass insbesondere die ungenügende Beschreibung der Rauheitstruktur der Sohloberfläche durch einen charakteristischen Korndurchmesser des Sohlmaterials als unzureichend anzusehen ist. Hinsichtlich der Beschreibung rauer Oberflächenstrukturen wurde ein einfacher Segmentierungsalgorithmus entwickelt, der es erlaubt, komplizierte Oberflächenstrukturen zu vereinfachen und über die Standardabweichung abschnittsweise Rauheiten zuzuweisen. Dieses Verfahren wird in einem zweidimensionalen hydraulischen Modell eingesetzt. Hierdurch wird für die Wassertiefenbestimmung als auch für die Fließgeschwindigkeitsbestimmung eine Berücksichtigung der speziellen topographischen Verhältnisse ermöglicht. N2 - One- and two-dimensional numerical simulations of open-channel flows are more and more used for applications of constantly more complex processes among other things in the field of ecohydraulics in mountainous streams. Among the principles of numerical simulation the flow field and its interdependence of roughness elements as well as flow depth are treated. Investigations are made in a laboratory flume. It is shown, that the usually used approach of average bed slope in step-pool sequences is not admissible instead of local energy slope. The application of approaches known from literary are not leading to satisfying results. The investigation of different resistance equations showed in particular that insufficient describing of roughness structures of bed level only by characteristic grain size fails. Regarding description of roughness structures was developed an simple segmentation algorithm which allows to simplify complex roughness structures. They are transformed to segments of similar standard deviation. This algorithm is inserted in an two-dimensional flow model. Therefore calculation of water depth and flow velocity can be done regarding topographic situation, e.g. step-pool sequences. KW - Rauigkeit KW - Direkte numerische Simulation KW - Strömungswiderstand KW - Oberflächenstruktur KW - Fließgewässer KW - Segmentierung KW - Oberflächenbeschreibung KW - Rauheitsparameter KW - Geschwindigkeitsverteilung KW - Stufen-Schwellen-Sequenzen KW - step-pool sequences KW - velocity distribution KW - roughness KW - surface structures KW - segmentation algorithm Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050307-4181 ER - TY - CHAP A1 - Zarli, Alain A1 - Storer, Graham A1 - Kazi, Abdul Samad (Sami) T1 - Building a Better Future: Major Results from the ICCI Cluster Project N2 - To support research in the building sector and in order to help it move towards a new digital economy, the European Commission under the 5th Framework initiative, especially the IST programme, funded various RTD projects. The opportunity to bring these IST projects together was acknowledged so that stronger links can be created under a clustering umbrella and that, moreover, links of those projects with their RTD environment could be facilitated. This has been the objective of work carried out within the ICCI (IST-2001-33022) Cluster project. This paper introduces the main aims and objectives of the project, and then presents its principal outcomes. In a second part, it synthesises the underlying concepts, technology and tools that will make ICT-based Construction a reality in a near future, and gives recommended actions for the industry, the EC and the Construction ICT R&D in Europe, giving some benefit of this project experience to the three communities. KW - Forschung KW - Europa KW - Informationstechnik KW - Baubetrieb Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1994 ER - TY - JOUR A1 - Kabath, Meik A1 - Stuyts, Patrick T1 - Building Design towards 5-dimensions N2 - There exists a big gap between the capabilities of current 3D-CAD applications and their actual usage in practice. Many architects and planners still prefer to draft in 2D because the benefits of 3D modeling are difficult to explain. This presentation offers a basis to view the 3D building model not merely as the source for 2D plan generation. By adding extra dimensions like Time and Cost to the 3D building model it becomes possible to generate dynamic information on building construction progress with regards to used material, resources and cost. These additional benefits are key elements to many planners and contractors and may therefore widen the acceptance of 3D building modeling in general. KW - Bauindustrie KW - Baukonstruktion KW - Bauwerksplanung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2712 ER - TY - CHAP A1 - Gebbeken, Norbert A1 - Pfeiffer, Eberhard A1 - Videkhina, Inna T1 - Calculation of beam structures with the symbolic computer language Maple N2 - Beside the standard calculation programs for civil engineering buildings mathematical programs have been lately established for the solution of differential equations for the analysis of mechanical and static systems. Programs like Maple, Matlab, MathCAD and Mathematica are popular in this field. To the knowledge of the authors, the widest application functionality offers the program Maple. Its advantages are, e.g. the alternatively symbolic or numerical solution of differential equation systems, the easy handling of parameter studies, the immediate visualization of results, the definition of macros for selected calculation steps and their export in other computer languages and, not least, the automatically generated, very clear documentation of the matehematical calculus. KW - Bautechnik KW - Computerunterstütztes Lernen KW - Maple Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-845 ER - TY - JOUR A1 - Zavadskas, Edmundas Kazimieras A1 - Kaklauskas, Arturas T1 - Civil Engineering Decision Support Systems in Lithuania N2 - Civil engineering decision support systems (construction, building life cycle, refurbishment, total quality management, innovation, etc.) created in Lithuania are described in this paper. The above decision support systems comprise of the following constituent parts: data (database and its management system), models (model base and its management system) and a user interface. Presentation of information in databases may be in conceptual (digital, textual, graphical, photographic, video) and quantitative forms. Quantitative information presented involves criteria systems and subsystems, units of measurement, values and initial weight fully defining the variants provided. The databases were developed providing a multiple criteria analysis of alternatives from economical, infrastructure, technical, technological, qualitative, legislative, social and other perspectives. This information is provided in a user-oriented way. Since the analysis of alternatives is usually performed by taking into account economical, infrastructure, technical, technological, qualitative and other factors, a model-base include models which enable a decision maker to carry out a comprehensive analysis of the variants available and make a proper choice. These systems, related questions and practical case study were analysed the paper. KW - Wissensmanagement KW - Bautechnik KW - Entscheidungsunterstützungssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2579 ER - TY - CHAP A1 - Hartmann, Ulrich C. T1 - Collaboration in AEC Design : Web-enabling Applications using Peer-to-Peer Office Communicator N2 - A market analysis conducted by Gartner Dataquest in August 2001 has shown the typical characteristics of the AEC design process. High volatility in membership of AEC design groups and members dispersed over several external offices is the common collaboration scenario. Membership is most times short lived, compared to the overall duration of the process. A technical solution has to take that into account by making joining and leaving a collaborative work group very easy. The modelling of roles of collaboration between group members must be based on a commonly understood principle like the publisher / subscriber model, where the individual that is responsible for the distribution of vital information is clear. Security issues and trust in the confidentiality of the system is a central concern for the acceptance of the system. Therefore, keeping the subset of data that will be published under the absolute control of the publisher is a must. This is not the case with server-based scenarios, sometimes even due to psychological reasons. A loosely bound Peer-to-Peer network offers advantages over a server-based solution, because of less administrative overhead and simple installation procedures. In a peer-to-peer environment, a publish/subscribe role model can be more easily implemented. The publish/subscribe model matches the way AEC processes are modelled in real world scenarios today, where legal proof of information exchange between external offices is of high importance. Workflow management systems for small to midsize companies of the AEC industry may adopt the peer-to-peer approach to collaboration in the future. Further investigations are being made on the research level (WINDS) by integrating the viewer and redlining application Collaborate! into a collaborative environment. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Kommunikationsmodell Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1386 ER - TY - CHAP A1 - Hassan, Tarek A1 - Shelbourn, Mark A1 - Carter, Chris T1 - Collaboration in Construction: Legal and Contractual Issues in ICT Applications N2 - The construction industry is a project-based business bringing together many different organisations to complete a desired goal. The strategic use of Information and Communication Technologies (ICT) has enabled this goal to be completed more effectively. Two issues require addressing, the technology itself and the implementation factors of the technology. Such implementation factors should consider, among other factors, the legal and contractual issues associated with the use of ICT, training requirements and its effects on the organisational culture. To date the legal and contractual issues have not been extensively covered, and it is recognised that the technologies have not been properly covered by any recognised legal and contractual practices. This in turn is threatening to inhibit the growth and prosperity of the use of the technology on construction projects. This paper discusses these legal and contractual issues and describes methods and tools that can be used to enable the growth of technology to be used in a legal and contractually valid environment. KW - Forschung KW - Europa KW - Informationstechnik KW - Bauindustrie KW - Vertrag Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2005 ER - TY - CHAP A1 - Soibelman, Lucio A1 - O'Brien, William A1 - Elvin, George T1 - Collaborative Design Processes: A Class on Concurrent Collaboration in Multidisciplinary Design N2 - The rise of concurrent engineering in construction demands early team formation and constant communication throughout the project life cycle, but educational models in architecture, engineering and construction have been slow to adjust to this shift in project organization. Most students in these fields spend the majority of their college years working on individual projects that do not build teamwork or communication skills. Collaborative Design Processes (CDP) is a capstone design course where students from the University of Illinois at Urbana-Champaign and the University of Florida learn methods of collaborative design enhanced by the use of information technology. Students work in multidisciplinary teams to collaborate from remote locations via the Internet on the design of a facility. An innovation of this course compared to previous efforts is that students also develop process designs for the integration of technology into the work of multidisciplinary design teams. The course thus combines both active and reflective learning about collaborative design and methods. The course is designed to provide students the experience, tools, and methods needed to improve design processes and better integrate the use of technology into AEC industry work practices. This paper describes the goals, outcomes and significance of this new, interdisciplinary course for distributed AEC education. Differences from existing efforts and lessons learned to promote collaborative practices are discussed. Principal conclusions are that the course presents effective pedagogy to promote collaborative design methods, but faces challenges in both technology and in traditional intra-disciplinary training of students. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Computer Supported Cooperative Work Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1948 ER - TY - CHAP A1 - Miles, John A1 - Joita, Liviu A1 - Burnap, Peter T1 - Collaborative Engineering: Virtual Teams in a Grid Environment Supporting Consortia in the Construction Industry N2 - In the AEC (Architecture / Engineering / Construction) industry a number of individuals and organisations collaborate and work jointly on a construction project. The resulting consortium has large pool of expertise and experience and can be defined as a Virtual Organisation (VO) formed for the duration of the project. VOs are electronically networked organisations where IT and web based communication technology play an important role in coordinating various activities of these organisations. This paper describes the design, development and implementation of a Grid enabled application called the Product Supplier Catalogue Database (PSCD) which supports collaborative working in consortia. As part of the Grid-enabling process, specialised metadata is being developed to enable PSCD to effectively utilise Grid middleware such as Globus and Java CoG toolkits. We also describe our experience whilst designing, developing and deploying the security service of the application using the Globus Security Interface (GSI). KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Projektmanagement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1362 ER - TY - CHAP A1 - Fruchter, Renate A1 - Saxena, Kushagra A1 - Breidenthal, Matt T1 - Collaborative Exploration of Rich Content in Support of Knowledge Re-use N2 - A/E/C Team members, while collaborating on building projects, rely on past experiences and content through the use of project design archives (whether in paper or digital format). This leads to underutilization of potential knowledge, as decision-making of data, information, and knowledge reuse is limited by access to these archives, due to sheer size and inconvenient presentation. This paper presents an integrated solution that leverages two technologies CoMem (Corporate Memory) and iRoom (interactive Room) developed at Stanford. This addresses critical limitations, i.e., content, context, visualization and interactivity, constraining the process of collaborative exploration towards knowledge reuse and decision-making. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1952 ER - TY - CHAP A1 - König, Reinhard A1 - Bauriedel, Christian T1 - Computer-generated Urban Structures T2 - Proceedings of the Generative Art Conference N2 - How does it come to particular structure formations in the cities and which strengths play a role in this process? On which elements can the phenomena be reduced to find the respective combination rules? How do general principles have to be formulated to be able to describe the urban processes so that different structural qualities can be produced? With the aid of mathematic methods, models based on four basic levels are generated in the computer, through which the connections between the elements and the rules of their interaction can be examined. Conclusions on the function of developing processes and the further urban origin can be derived. KW - Computational Urban Design Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160623-26090 SP - 1 EP - 10 CY - Milan, Italy ER - TY - CHAP A1 - Katzenbach, Rolf A1 - Giere, Johannes T1 - Coordinating Planning Processes in AEC using an Adaptable Process Model N2 - The contribution introduces an adaptable process model to meet the special requirements of the coordination of planning activities in AEC (Architecture, Engineering, Construction). The process model is based on the concept of Coloured Petri-Nets and uses metainformation to characterize process-relevant information and to enable process-control based on the actual results of the planning. KW - Prozessmodell KW - Planungsprozess Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-946 ER - TY - CHAP A1 - Kopyto, Martin A1 - Petersen, Michael A1 - Diaz, Joaquin T1 - Cost and Schedule Controlling in Relation to Liquidity Management during Construction Projects N2 - The present paper describes a software application which can be used for relating the scheduled events of a construction project with the respective financial parameters, leading to an overall improvement in general controlling and liquidity management. For this purpose, existing construction schedules are taken and details of the assignment are recorded. Thus it becomes possible to assess a future payment status should changes in the designated schedule occur. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Controlling Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1599 ER - TY - THES A1 - Lang, Dominik H. T1 - Damage potential of seismic ground motion considering local site effects N2 - The main objective of the present work is to establish a link between the scientific fields of engineering seismology and structural engineering. Substantially it deals with the application and enhancements of methods coming from engineering seismology as well as their junctions to the fields of structural engineering respectively earthquake engineering. Based on real occurred earthquake damage inflicted to multistoried reinforced-concrete frame buildings, the influence of local site effects on the grade of structural damage is worked out. This relying on comprehensive investigations conducted during numerous field missions of German TaskForce after damaging earthquakes in Venezuela and Türkiye. Instrumental investigations on both the structure and its local subsoil in order to identify the damage potential of seismic ground motion take center stage of the thesis. Thereby it is examined whether or not an estimated seismic demand representative in amplitude level and frequency characteristics is able to cause structural damage considering the vulnerability of the structure itself as well as the local site and subsoil conditions. Investigations are concentrated on selected RC frame structures with or without masonry infill walls. N2 - Die Arbeit ordnet sich in die wissenschaftliche Disziplin der Ingenieurseismologie ein. Sie beinhaltet im wesentlichen die Anwendung und Weiterentwicklung ingenieurseismologischer Methoden sowie deren Verbindung zum Bereich des konstruktiven Ingenieurbaus bzw. des Erdbebeningenieurwesens. Auf der Grundlage dokumentierter Erdbebenschäden an ingenieurmäßig ausgeführten Bauwerken wird der Einfluß sogenannter lokaler Standorteffekte („site effects“) auf den Grad der Schädigung untersucht. Die hierfür notwendige Datenbasis instrumenteller Standortuntersuchungen sowie die Dokumentation und Analyse repräsentativer Bauwerksstrukturen wurde im Rahmen der Einsätze der Deutschen TaskForce für Erdbeben erhoben. Diese stützen sich insbesondere auf Feldeinsätze in Venezuela und der Türkei. Im Mittelpunkt der Arbeit steht die Identifikation des Schadenspotentials seismischer Bodenbewegung mittels instrumenteller Standort- und Bauwerksuntersuchungen. Dabei wird im einzelnen untersucht inwieweit eine für den Standort repräsentative seismische Einwirkung fähig ist unter Berücksichtigung der Bauwerksverletzbarkeit und der anstehenden Untergrundbedingungen strukturelle Bauwerksschäden hervorzurufen. Hierbei konzentrieren sich die Untersuchungen auf mehrgeschossige Stahlbeton-Rahmenbauwerke mit und ohne Mauerwerksausfachung. Der wissenschaftliche Ansatz, die durch Erdbeben verursachten Bauwerksschäden über instrumentelle Standortuntersuchungen zu interpretieren, ist Gegenstand einer Reihe unterschiedlicher Forschungsarbeiten. Meist beschränken sich diese auf die Betrachtung des Untergrundes und dessen verstärkenden Effekte auf die seismische Bodenbewegung. Ein überzeugender Nachweis, daß diese Verstärkungseffekte auch tatsächlich für die Bauwerksschäden verantwortlich sind, wurde bis dato nicht erbracht. Vor allem die Berücksichtigung der Bauwerks mitsamt seinen strukturellen Defiziten, die durch Material- und Ausführungsqualität oder durch Entwurfsfehler hervorgerufen werden, kommt hierbei oft zu kurz. Um die potentiell schadenverursachenden Verstärkungseffekte des Untergrundes identifi-zieren zu können stehen eine Reihe unterschiedlicher Methoden und Verfahren zur Verfügung (site response estimation techniques). Dabei wird grundsätzlich zwischen den empirischen Verfahren der Ingenieurseismologie auf meßtechnisch gewonnene Daten und den analytischen Verfahren der Bodendynamik unterschieden. Letztere bedingen detaillierte Informationen zu den einzelnen Bodenschichten (mechanische und dynamische Parameter), die jedoch zeit- und kostenaufwendige Untersuchungen voraussetzen. T2 - Schadenspotential seismischer Bodenbewegung unter Berücksichtigung lokaler Standorteffekte T3 - Scientific technical reports // Zentrum für Ingenieuranalysen von Erdbebenschäden Weimar - 2004,1 KW - Erdbebenschaden KW - Bodenunruhe KW - Schadenspotential KW - Untergrundklassifikation KW - H/V-Methode KW - Push-over Analyse KW - Stahlbeton-Rahmenbauwerke KW - site classification KW - microtremors KW - earthquake damage KW - damage potential KW - push-over analysis Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040826-911 ER - TY - THES A1 - Winkelmann, Arne T1 - Das Pionierlager Artek. Realität und Utopie in der sowjetischen Architektur der sechziger Jahre T1 - The Pioneer Camp Artek. Reality and Utopia in Soviet Architecture of the 1960's N2 - Das in den 1960er Jahren gebaute, internationale Pionierlager Artek an der Schwarzmeerküste der Krim war das größte Kinderferienlager der Sowjetunion. Als Prestigeobjekt und Vorzeigeinstitution steht Artek für die Architektur der Ära Chruschtschows, des sogenannten „Tauwetters“. Anhand des dialektischen Prinzips von Präsentation und Repräsentation werden vier Aspekte des Lagers untersucht: Architektur, städtebauliche Struktur, Erziehung und Gesamtkunstwerk. Durch dieses Prinzip, das sich aus der Widerspiegelungstheorie ableiten läßt, kann jedem dieser Aspekte die Kongruenz zur ideologischen Zielsetzung und damit die gestalterische Kohärenz der Ferienanlage nachgewiesen werden. In Abgrenzung zur modernen Architektur der westlichen Industrienationen wurde in Artek eine spezifisch „sozialistische Moderne“ für die Sowjetunion und die übrigen Staaten des Ostblocks definiert. Diese war eng verbunden mit dem Städtebau auf der Grundlage von Mikrorayons und der Ausgestaltung von Stadt- und Subzentren. Artek ist mit seiner idealtypischen, architektonischen und städtebaulichen Gestaltung ein Denkmal für die frühere Sowjetunion. N2 - The pioneer camp Artek on the Crimean peninsula at the Black Sea was built in the 1960’s and was the biggest of its kind in the former Soviet Union. As a representative and representing institution Artek is a famous example for the architecture of the Khrushchev-era, the so called “Thaw”. From the dialectical principle of presentation and representation four aspects of the camp are analysed: architecture, urban planning, education and “Gesamtkunstwerk”. Within these principle which is deduced from the “Widerspiegelungstheorie” every aspect shows congruence to its ideological target and with that the coherent design of the camp. Distinguishing to the modern architecture of the western industrial nations in Artek a specific “socialist modernism” for the Soviet Union and the allied countries was defined. This was strictly linked with an urban planning based on Mikrorayons and the design of city-centers and sub-centers. Artek as an ideal design of architecture and urban planning is a monument for the former Soviet Union. KW - Entstalinisierung KW - Pioniererziehung KW - Architektur KW - Krim KW - Sozialistischer Realismus KW - Stahlbetonbau / Skelettbau KW - sozialistische Moderne KW - Artek KW - Junge Pioniere KW - sowjetische Architektur KW - socialist modernism KW - Artek KW - young pioneers KW - soviet architecture Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040817-878 ER - TY - CHAP A1 - Cheung, Moe M. S. A1 - Noruziaan, Bahman A1 - Li, W. C. T1 - Data acquisition, processing and management systems for a Canadian bridge monitoring project N2 - This paper will present a number of technical aspects for one of the most elaborate instrumentation and data acquisition projects ever undertaken in Canada. Confederation Bridge, the longest bridge built over ice covered seawater has been equipped with the state of the art data acquistition devices and systems as well as data transfer networks. The Bridge has been providing a fixed surface connection between Prince Edward Island and Province of New Brunswick in Canada since its opening in 1997. The Bridge has a rather long design service life of 100 years. Because of its large size and long span length, its design is not covered by any existing codes or standards worldwide. The focus of the paper is to introduce the data acquisition, transfer, processing and management systems. The instrumentation and communications infrastructure and devices will be presented in some details along with the data processing and management systems and techniques. Teams of engineers and researchers use the collected data to verify the analysis and design assumptions and parameters as well as investigate the short-term and long-term behaviour and health of the Bridge. The collected data are also used in furthering research activities in the field of bridge engineering and in elevating our knowledge about behaviour, reliability and durability of such complex structures, their components and materials. KW - Bauwerk KW - Datenmanagement KW - Brückenbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1235 ER - TY - CHAP A1 - Liu, Liang A1 - Soibelman, Lucio A1 - Wu, Jianfeng T1 - Data Fusion and Modeling for Construction Management Knowledge Discovery N2 - Advances in construction data analysis techniques have provided useful tools to discover explicit knowledge on historical databases supporting project managers’ decision making. However, in many situations, historical data are extracted and preprocessed for knowledge discovery based on time-consuming and problem-specific data preparation solutions, which often results in inefficiencies and inconsistencies. To overcome the problem, we are working on the development of a new data fusion methodology, which is designed to provide timely and consistent access to historical data for efficient and effective management knowledge discovery. The methodology is intended to be a new bridge between historical databases and data analysis techniques, which shields project managers from complex data preparation solutions, and enables them to use discovered knowledge for decision making more conveniently. This paper briefly describes the motivation, the background and the initial results of the ongoing research. KW - Bauwerk KW - Datenmanagement KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1254 ER - TY - CHAP A1 - Pavlov, Alexander T1 - Data Transfer and Objects Recognition in Building Design N2 - The problem of data interoperability is now very important. The formal description of construction systems and objects must base upon the modeling for the description of construction data domain. The XML-language was selected as a basis of a universal data format, ensuring natural hierarchy of objects, flexibility, good layout and expandability. The language, developed by the author, is called Building Object Description Extensible Markup Language (bodXML). The types of all objects used by data transfer should be definite beforehand with existing methods of programming. It limits the possibilities of IT in application of new types. But the recipient software must recognize the building objects even if the kind of object is unknown at the outset. The author offers a set of main topological and geometric properties being sufficient for recognition of main three-dimensional building constructions with flat edges. The tests of artificial neuron network have shown that the recognition of a kind of the constructions represented as a set of indicated parameters happens enough confidently. KW - Bauwerk KW - Datenmanagement KW - Datenaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1265 ER - TY - JOUR A1 - Zavadskas, Edmundas Kazimieras A1 - Kaklauskas, Arturas A1 - Viteikiene, Milda T1 - Database of Best Practices and Decision Support Web-based System for Construction Innovation N2 - Many construction and facilities management Web sites can be found on the Internet. The interested parties on construction and facilities management Web sites can find databases of best practices, calculators, analyzers, software, expert and decision support systems, neural networks, etc. Technological innovation mainly through changes in the availability of information and communication technology inclusive databases of best practices, calculators, analyzers, software, neural networks, decision support and expert systems that have been provided by a variety of new services developed by the construction and facilities management sectors. Most of all calculators, analyzers, software, decision support and expert systems, neural networks and on-line systems seek to find out how to make the most economic decisions and most of all these decisions are intended only for economic objectives. Alternatives under evaluation have to be evaluated not only from the economic position, but take into consideration qualitative, technical, technological and other characteristics as well. Based on the analysis of the existing calculators, analyzers, information, expert and decision support systems, neural networks and in order to determine most efficient versions of best practices a Decision Support Web-Based System for Construction Innovation (IDSS) was developed by Vilnius Gediminas Technical University. KW - Mehragentensystem KW - Lernendes System KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2173 ER - TY - JOUR A1 - Kaklauskas, Gintaris A1 - Cervenka, Vladimir A1 - Cervenka, Jan T1 - Deflection Calculation of RC Beams: Finite Element Software versus Design Code Methods N2 - The paper investigates accuracy of deflection predictions made by the finite element package ATENA and design code methods ACI and EC2. Deflections have been calculated for a large number of experimental reinforced concrete beams reported by three investigators. Statistical parameters have been established for each of the technique at different load levels, separately for the beams with small and moderate reinforcement ratio. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Balken Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2498 ER - TY - THES A1 - Zierold, Sabine T1 - Der mediale Raum der Architektur T1 - The medial space of architecture N2 - Der architektonische Raum wird als ein Medium der Kommunikation im Kontext der >neuen< Medien begriffen, aus der Erkenntnis, dass er schon immer ein Medium war und aus einer komplexen Medienstruktur in Abhängigkeit von anderen Medien besteht. Im Prozess von Handlung und Kommunikation ist der architektonische Raum das Medium, das räumliche Nähe von Individuen über alle Sinne und das Bewusstsein gleichzeitig intensiv ermöglicht. Der architektonische Raum als immersives Kommunikationsmedium erreicht im Zeitalter der >neuen< Medien eine neue Dimension, indem mehr und andere Wirklichkeitsalternativen der Kommunikation zur Verfügung stehen. N. Luhmann folgend, wird die Architektur aus der Sicht der Form/Medium-Differenz systemtheoretisch als strukturierter Möglichkeitsraum betrachtet. Der Raum ist das Medium für Formen des architektonischen Raumes, in dem Architektur überhaupt erst wirksam wird. Umgekehrt sind die Formen des architektonischen Raumes Medien für die Wahrnehmung einer Vielzahl von räumlichen Wirklichkeiten. Eine Fassade aus Stein oder Glas ist gebaute Form und kann als Medium Information kommunizieren. Medien werden ihrer Bestimmung um so besser gerecht, je mehr sie sich der Aufmerksamkeit entziehen und wie transparente Fenster hinter der Oberfläche der sinnlichen Wahrnehmung zurücktreten. Als >unwahrnehmbares< Medium ist der architektonische Raum damit eine hintergründige >Wirkungsmacht<, eine Bühne für die Entfaltung von Wirkung, Atmosphäre und Bewegung. Seine physische Wirklichkeit war schon immer durch virtuelle Wirklichkeiten oder Realitäten entgrenzt, die durch Techniken und Technologien der Simulation als künstliche Welten wahrnehmbar und kommunizierbar werden. Dies kann an tradierten Beispielen der gotischen Kathedrale, dem Panorama, den panoptischen Räumen, dem Theater, Kino oder den kontinuierlichen Räumen von der Moderne bis heute aufgezeigt weren. Virtuelle Räume gotischer Glasbilder oder barocker Decken- und Wandbilder im Medium des architektonischen Raumes sind uns geläufig. Die Immersion, das Eintauchen in diese virtuellen Wirklichkeitsspären löst die Wahrnehmung der eigenen körperlichen Präsenz in ihnen aus. Das Potential des virtuellen Raumes der Architektur besteht im Vergleich zu anderen virtuellen Realitäten von Text, Bild oder digitalen Medien in seiner Gebundenheit an die physische, räumliche Reizstruktur, der er die Eindringlichkeit und Komplexität seiner Wirkung verdankt. Es werden unterschiedliche Wechselwirkungen und gemeinsame Entwicklungen von zeitgenössischen Beispielen der Architektur mit den >neuen< Medien aufgezeigt. In der »sensitiven Wand« wird die physische Raumgrenze durch die Integration neuer Techniken und Technologien digitaler, elektronischer Medien etwas extrem Flexibles und Formbares in Interaktion mit dem Benutzer. Der H2O Pavillon (Oosterhuis und NOX, 1997) ist ein Beispiel dafür. Der ausgeprägt polysensorische Immersionsraum steht für die Einheit von digitaler und architektonischer Simulation. Die metaphorische Welt von Höhle und Quelle des Thermalbades Vals (P.Zumthor, 1996) ist die räumliche Reflexion auf die metaphorische Struktur virtueller Räume der >neuen< Medien. Die simulierte Wirklichkeit in den Medien Wasser, Stein und architektonischer Raum produziert schöpferisch den polysensorischen immersiven Zugang in die virtuellen Welten >authentischer< physischer Umgebung. Das >Sichtbare< im Medium Raum der Architektur ist ohne das >Unsichtbare< nicht zu begreifen bzw. das sinnlich Wahrnehmbare nicht ohne das Unwahrnehmbare. Das Erkennen dieser Relation von Form und Medium ermöglicht die Formulierung des neuen Begriffes des medialen Raumes der Architektur, der zur Basis für eine Medientheorie der Architektur wird, als Sichtweise der Entgrenzung des physischen Raumes durch den virtuellen Raum für die subjektive Wahrnehmung, Handlung und Kommunikation. N2 - Within the context of the >new< media, architectonic space must be understood as a medium of communication. This is because it was always a medium, coexisting with other media within a complex media structure. Ensconced as it is within a process of activity and communication, architectonic space is the one medium that facilitates such a close proximity of individuals whose senses and consciousness thus experience a simultaneity of intensity. The architectonic space as an immersive communication medium attained a new dimension in the age of the >new< media, interactive communication availing itself of an increased number of alternative realities. Following the work of N. Luhmann, architecture may be viewed from the perspective of form/medium-difference as a structured space of possibilities within a theory of systems. The space is the medium for forms of architectonic space in the sense that only then does the architecture itself become apparent. The contrary is the case where forms of architectonic space act as media for the apperception of numerous spatial realities. A façade made of stone or glass is built form and as a medium can impart information. The more media abandon their advertence, the better they fulfil their appropriateness and recede like transparent windows behind the surface of animal consciousness. Thus, architectonic space as a >non-perceptible< medium becomes an >agent of power<, a stage for the evolvement of agency, atmosphere and movement/action. Its physical reality was always borderless, not bounded by virtual actualities or realities which are themselves perceivable and communicable as artificial worlds via the techniques and technologies of simulation. Right up to the present day, this is exemplified by artifices such as the Gothic cathedral, the panorama and panoramic spaces, the theatre, the cinema, or the continuous spaces of modernism. Virtual spaces defined by Gothic stained glass or ceiling and wall murals of the Baroque – within the medium of the architectonic space lest we forget – are all familiar to us. Immersion, in the sense of submerging in these virtual sanctums of reality, releases the apperception of each corporeal presence. In comparison to other virtual realities such as text, image or digital media, the potential of the virtual space in architecture arises out of its bondage to the physical and spatial structure of stimuli on which the forcefulness and complexity of its effectiveness depends. Citing examples of contemporary architecture points up various interdependencies between and common evolutions among the >new< media. As new techniques and technologies of digital and electronic media are introduced, the physical spatial border of the >sensitive wall< becomes in terms of interaction increasingly pliable and ductile for the user. The H2O Pavilion (Oosterhuis and NOX, 1997) is just one example. The highly polysensoric immersion space stands for the unity of digital and architectonic simulation. The metaphoric world of caverns and wells of the hot springs at Vals (P. Zumthor, 1996) is the spatial reflexion on the metaphoric structure of virtual spaces as exemplified by the >new< media. The simulated reality in the media water, stone, and architectonic space, enables in an inventive way the polysensoric and immersive access to the virtual worlds of the >authentic< physical environment. That which is >visible< in the medium of architectural space is not understandable without the >invisible<; in other words, the state of sensory perceptibility depends on the existence of the non-perceptible. The recognition of this relation between form and medium allows a new term to be formulated: the >medial space of architecture<. This in turn becomes the basis for a new media theory of architecture itself, a premise defined as a perspective on the debordering of physical space through the virtual one and existing to provide subjective apperception, activity and communication. KW - Architektur KW - Medium KW - Form KW - Bauform KW - Raumwahrnehmung KW - Simulation KW - Imagination KW - Kommunikation KW - Immersion KW - Illusion KW - architektonischer Raum KW - Virtualität KW - architectural space KW - virtuality Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060806-8106 ER - TY - THES A1 - Laudel, Katja T1 - Der Typenwandel des ländlichen Wohnhauses im Oderbruch zwischen 1753 zwischen 1850 - Der Einfluss von friderizianischer Kolonisation und preußischer Obrigkeit auf die Hausformen der ländlichen Untertanen T1 - The transformation of the rural house types in Oderbruch between 1753 and 1850 N2 - Seit ihren Anfängen im ausgehenden 19. Jh. ist der brandenburgischen Hausforschung ein Phänomen in der Entwicklung des ländlichen Wohnhauses bekannt, das in der vorliegenden Arbeit als Typenwandel bezeichnet wird: Zahlreiche Landschaften der ehemaligen Kurmark Brandenburg wurden bis in das 18. Jh. hinein von einem giebelständigen Haustyp - dem sogenannten Märkischen Mittelflurhaus - geprägt. Im Verlauf des 18. und 19. jh. wurde dieser von einem traufständigen Haustyp - dem sogenannten Mitteldeutschen Ernhaus - >verdrängt<. Dieser Typenwandel ist wie jeder Wandel einer tradierten Hausform auf einen Komplex verschiedener Faktoren und Einflussgrößen zurückzuführen. Über diese Faktoren und Einflussgrößen bestehen in der bisherigen regionalen Hausforschung folgende Thesen: Zum einen wird angenommen, dass das Vorbild der im Rahmen der friderizianischen Kolonisation seit der Mitte des 18. Jh. zahlreich erbauten, traufständigen Kolonistenhäuser diesen Typenwandel beeinflusst oder ausgelöst habe. Zum anderen seien die baupolizeilichen Vorschriften und der Einfluss der preußischen Landbauschule - vertreten durch das Oberbaudepartement - ein auslösender oder beschleunigender Faktor gewesen. Aufgabe der Untersuchung ist es, diese Thesen anhand eines geeigneten Untersuchungsgebietes zu diskutieren. Als solches eignete sich das Oderbruch insbesondere, weil es das größte zusammenhängende Siedlungsgebiet auf deutscher Seite darstellt, das unter der Regentschaft Friedrichs des Großen kolonisiert wurde, und seine allmähliche Trockenlegung seit der Mitte des 18. Jh. von intensiven obrigkeitlichen Eingriffen begleitet war. Mit der zusätzlichen Abgrenzung der untersuchten Hausformen auf diejenigen der ländlichen Mittelschicht, d.h. auf die Häuser der Bauern, Fischer und Kossäten, basiert die zentrale stratigrafische Untersuchung des Wandlungsprozesses einerseits auf durch die Autorin selbst erarbeiteter Bauforschung am rezenten Hausbestand und andererseits auf der Auswertung umfangreichen Archivmaterials. Der durch zahlreiche Übergangsformen nachweisbare Prozess der Herausbildung des jüngeren Haustyps aus dem älteren Haustyp heraus widerlegt die bisherige Annahme, dass der Typenwandel lediglich eine Grenzverschiebung zwischen den geografischen Verbreitungsgebieten zweier frühneuzeitlicher Haustypen gewesen sei. Die archivalische Überlieferung zur friderizianischen Kolonisation, zum ländlichen Baugeschehen im ausgehenden 18. und beginnenden 19. Jh. sowie zur obrigkeitlichen Reglementierung des >Unterthanenbauwesens< erbringt den eindeutigen Nachweis, dass weder das Vorbild der Kolonistenhäuser noch irgendeine Form der obrigkeitlichen Einflussnahme für den Wandel vom giebelständigen zum traufständigen Haustyp von Bedeutung waren. Vielmehr erweisen sich die Auswirkungen der Agrarreformen auf die bäuerlichen Betriebe als der ausschlaggebende Faktor für den Typenwandel. Die bisher angewandten Begriffe zur Bezeichnung der Haustypen stellen sich im Ergebnis der Untersuchung nicht nur als irreführend sondern falsch heraus. Die Arbeit eröffnet deshalb eine Debatte zur Neudefinition der Typenbegriffe innerhalb der regionalen Hausforschung. N2 - The paper investigates the influence of the houses of colonists which were built during the Friderician colonization in Oderbruch in the middle of 18th century and the Prussian administrative body on the transformation process of the farmer houses between the years 1753 and 1850. KW - Bauernhaus KW - Oderbruch KW - Hausforschung KW - Bauforschung KW - Brandenburg KW - Preußische Reformen KW - Hausformenwandel KW - friderizianische Kolonisation KW - Kolonistenhäuser KW - Preußen/Oberbaudepartement KW - Preußen/Baupolizei KW - rural houses KW - farmer houses KW - rural arquitecture Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050509-6663 ER - TY - CHAP A1 - Lähr, André A1 - Bletzinger, Kai-Uwe T1 - Design of an Analysis Environment for Planning Decision Support N2 - In this contribution, the design of an analysis environment is presented, that supports an analyst to come to a decision within a gradual collaborative planning process. An analyst represents a project manager, planner or any other person, involved in the planning process. Today, planning processes are managed by several geographically distributed planners and project managers. Thus, complexity of such a process rises even more. Prediction of consequences of many planning decisions is not possible, in particular since assessment of a planning advance is not trivial. There have to be considered several viewpoints, that depend on individual perceptions. In the following, methods are presented to realize planning decision support. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Schlussfolgern Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1370 ER - TY - CHAP A1 - Chou, Yu-Hur A1 - Hsieh, Shang-Hsien T1 - Design of Partial Scoring Assessment System for Reinforcement Concrete Design Course : Development of Partial Scoring Assessment System for Reinforcement Concrete Design Course N2 - In the field of Civil Engineering, the content of reinforcement concrete design course (RC course) has complicated design procedures and many difficult specifications to recognize, so most of the students regard the RC course a tough course, and teachers very often find the class time insufficient. Also, teachers of the RC course usually spend a lot of time in organizing the examinations for handling tedious calculations and complicated logical reasoning. Furthermore, correcting examination papers with partial scoring takes even more time of the teacher’s. Therefore, the objective of this research is to design and develop a partial scoring assessment system to meet the needs in engineering design courses, such as the RC course. This assessment system can generate test items with variable parameters. It also supports inference diagnosis on the examinee’s misconceptions and gives partial scores in grading the examination. In this research, the example test subject is the analysis of rectangular reinforced concrete beam with single layer steel bars. KW - Bautechnik KW - Computerunterstütztes Lernen KW - Stahlbeton Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-905 ER - TY - CHAP A1 - Tsou, Jin-Yeu A1 - Lam, Selina A1 - Wong, Wing Kin Gary T1 - Design of Rapidly Assembled Isolation Patient Ward – IT-Supported Collaborative Design Process between Architects and Medical Officers N2 - An important feature of the 2003 SARS outbreak in Canada, Singapore, and Hong Kong was that many health care workers (HCWs) developed SARS after caring for patients with SARS. This has been ascribed to inadequate or ineffective patient isolation. However, it is difficult for dense cities to provide sufficient isolation facilities within a short period of time. This has raised concerns from the public for new strategies in the planning and design of isolation facilities. Considering that SARS or other infectious diseases could seriously damage our society’s development, isolation facilities that could be rapidly and economically constructed with appropriate environmental controls are essential. For this reason, the design team of the Department of Architecture collaborated with a special task force from the Faculty of Medicine, who are the frontline medical officers treating the SARS patients, to design Rapidly Assembled Isolation Patient Wards. Both architecture and medicine are well established disciplines, but they have little in common in terms of the mode of knowledge construction and practice. This induced much intellectual exploration and research interest in conducting this study. The process has provided an important reference for cross disciplinary studies between the architectural and medical domains. KW - Architektur KW - Verteiltes System KW - Krankenhaus KW - SARS Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1748 ER - TY - CHAP A1 - Yahiaoui, Azzedine A1 - Hensen, Jan A1 - Soethout, Luc T1 - Developing CORBA-based distributed control and building performance environments by run-time coupling N2 - Communication software and distributed applications for control and building performance simulation software must be reliable, efficient, flexible, and reusable. This paper reports on progress of a project, which aims to achieve better integrated building and systems control modeling in building performance simulation by run-time coupling of distributed computer programs. These requirements motivate the use of the Common Object Request Broker Architecture (CORBA), which offers sufficient advantage than communication within simple abstraction. However, set up highly available applications with CORBA is hard. Neither control modeling software nor building performance environments have simple interface with CORBA objects. Therefore, this paper describes an architectural solution to distributed control and building performance software tools with CORBA objects. Then, it explains how much the developement of CORBA based distributed building control simulation applications is difficult. The paper finishes by giving some recommendations. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - CORBA Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1347 ER - TY - JOUR A1 - Pick, Tobias A1 - Heimsund, Bjoern-Ove A1 - Milbradt, Peter T1 - Development and Analysis of Sparse Matrix Concepts for Finite Element Approximation on general Cells N2 - In engineering and computing, the finite element approximation is one of the most well-known computational solution techniques. It is a great tool to find solutions for mechanic, fluid mechanic and ecological problems. Whoever works with the finite element method will need to solve a large system of linear equations. There are different ways to find a solution. One way is to use a matrix decomposition technique such as LU or QR. The other possibility is to use an iterative solution algorithm like Conjugate Gradients, Gauß-Seidel, Multigrid Methods, etc. This paper will focus on iterative solvers and the needed storage techniques... KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Bandmatrix Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2500 ER - TY - CHAP A1 - Lee, Yungui T1 - Development and application of CAD software in the field of building structures in China N2 - PKPM series CAD software is an integrated CAD system for building design, which integrated the following parts: architectural design, structural design, building service design and statistic analysis of quantity and budget. These four parts share the same database with high efficiency. Over 80% of design corporation in China are using PKPM series CAD software. The detailed information and some key modules of PKPM series CAD software are mainly introduced in this paper. KW - Bautechnik KW - Computerunterstütztes Lernen KW - CAD Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-898 ER - TY - JOUR A1 - Motawa, Ibrahim A1 - Anumba, Chimay A1 - El-Hamalawi, A. T1 - Development of a Fuzzy System for Change Prediction in Construction Projects N2 - Change management has been the focus of different IT systems. These IT systems were developed to represent design information, record design rationale, facilitate design coordination and changes. They are largely based on managing reactive changes, particularly design changes, in which changes are recorded and then propagated to the relevant project members. However, proactive changes are hardly dealt with in IT systems. Proactive changes require estimating the likelihood of occurrence of a change event as well as estimating the degree of change impacts on project parameters. Changes in construction projects often result from the uncertainty associated with the imprecise and vague knowledge of much project information at the early stages of projects. This is a major outcome of the case studies carried out as part of this research. Therefore, the proposed model considers that incomplete knowledge and certain project characteristics are always behind change causes. For proactive changes, predicting a change event is the main task for modelling. The prediction model should strive to integrate these main elements: 1) project characteristics that lead to change 2) causes of change, 3) the likelihood of change occurrence, and 4) the change consequences. It should also define the dependency relationships between these elements. However, limited data (documented) are only available from previous projects for change cases and many of the above elements can only be expressed in linguistic terms. This means that the model will simulate the uncertainty and subjectivity associated with these sets of elements. Therefore, a fuzzy model is proposed in this research to capture these elements. The model analyses the impact of each set of elements on the other by assigning fuzzy values for these elements that express the uncertainty and subjectivity of their impact. The main aim is to predict change events and evaluate change effects on project parameters. The fuzzy model described above was developed in an IT system for operational purposes and was designed as a Java package of components with their supporting classes, beans, and files. This paper describes the development and the architecture of the proposed IT system to achieve these requirements. The system is intended to help project teams in dealing with change causes and then the change consequences in construction projects. KW - Mehragentensystem KW - Lernendes System KW - Fuzzy-Logik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2180 ER - TY - JOUR A1 - Monobe, Kantaro A1 - Tanaka, Shigenori A1 - Furuta, Hitoshi T1 - Development of a System for Making Guide Maps based on the Idea of the Cognitive Map N2 - Digital maps are very easily applied as route guide maps. Route guide maps are provided through Web or a mobile phone services, and demand for such services is increasing. However, the production of a route guide map requires a great deal of time. Therefore, it is difficult for general users to make route guide maps. The purpose of the present research is the development of a system that can generate a route guide map using the Digital Map 2500 (Spatial Data Framework) published by the Geographical Survey Institute. This system will not require advanced equipment or expert knowledge. Therefore, anyone can produce route guide maps easily and quickly. By using the Digital Map 2500, the time and cost required in order to generate a map are reduced. Moreover, a useful route guide map can be created by simplifying the map form based on the human cognitive map. KW - Geoinformationssystem KW - Straßenkarte Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2688 ER - TY - CHAP A1 - Hoyano, Akira A1 - Nakaohkubo, Kazuaki A1 - Asawa, Takashi T1 - Development of Thermal Simulation Tool for Urban Block Design - Based on Numerical Simulation System using 3D N2 - A simulation system has been developed as a computer aided design tool to evaluate the effect of proposed design on the thermal environment during the designing process. This system calculates outdoor surface temperatures in order to evaluate the thermal impact of a design factor in outdoor space. In this study, the previous heat balance simulation system was improved to predict the surface temperature of a proposed design using 3D-CAD. This system is able to input the complicated outdoor spatial forms efficiently and also to evaluate the surface temperature distribution from any viewpoint. KW - Stadtplanung KW - Wärme KW - Simulation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-973 ER - TY - JOUR A1 - Koike, Hirotaka A1 - Morimoto, Akinori A1 - Nomura, Kazuhiro T1 - Development of Urban Land Use Model to Compare Transit-Oriented and Automobile-Oriented Cities N2 - This study is an attempt to develop a simple simulation model that can compare the differences between automobile-oriented and transit-oriented cities, and clarify the difference between city forms by transportation modes. Following a theoretical model development, a series of simulation runs are tried. The model allocates people who commute to CBD from residential zones along a transportation corridor. As a result of many simulation analyses, it is shown that automobiles need much more traffic space in comparison with the transit as is shown by the proposed traffic space ratio both in CBD and along the corridor. KW - Verkehrsplanung KW - Simulation KW - Stadtplanung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2621 ER - TY - CHAP A1 - Flood, Ian A1 - Issa, Raja A1 - Abu-Shdid, Caesar T1 - Developments in Hyper Real-Time Simulation of Transient Heat-Flow in Buildings N2 - This paper reports on the latest results in the development of a new approach for simulating the thermal behavior of buildings that overcomes the limitations of conventional heat-transfer simulation methods such as FDM and FEM. The proposed technique uses a coarse-grain approach to model development whereby each element represents a complete building component such as a wall, internal space, or floor. The thermal behavior of each coarse-grain element is captured using empirical modeling techniques such as artificial neural networks (ANNs). The main advantages of the approach compared to conventional simulation methods are: (a) simplified model construction for the end-user; (b) simplified model reconfiguration; (c) significantly faster simulation runs (orders of magnitude faster for two and three-dimensional models); and (d) potentially more accurate results. The paper demonstrates the viability of the approach through a number of experiments with a model of a composite wall. The approach is shown to be able to sustain highly accurate longterm simulation runs, if the coarse-grain modeling elements are implemented as ANNs. In contrast, an implementation of the coarse-grain elements using a linear model is shown to function inaccurately and erratically. The paper concludes with an identification of on-going work and future areas for development of the technique. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Echtzeitverarbeitung KW - Konvektion Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1961 ER - TY - CHAP A1 - Planker, Markus T1 - Die Aufsichtspflicht (und Klärungspflicht) des Architekten, Architekten- und Ingenieurhaftung, Berufshaftpflichtversicherungen N2 - Der Architektenvertrag als Werkvertrag (Konsequenzen: Haftung für den Werkerfolg, keine abschließende Bestimmung des vom Architekten geschuldeten Leistungsumfanges durch den Tätigkeitskatalog etwa von § 15 HOAI), vertragliche und außervertragliche Haftungstatbestände (vertragliche Ansprüche des Auftraggebers gegen den Architekten, Haftung gegenüber Dritten aufgrund des Architektenvertrages), typische Haftungsrisiken des Architekten, insbesondere im Kostenbereich sowie für Planungs- und Objektüberwachungsfehler (Haftung des Architekten für Überschreitung der Baukosten, Architektenhaftung bei Planungs- und Objektüberwachungsfehlern), Zulässigkeit der Vereinbarung von Haftungsbeschränkungen, Berufshaftpflichtversicherung für Architekten und Ingenieure KW - Baubetriebslehre KW - Haftung KW - Architektenrecht KW - Berufshaftung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7227 ER - TY - THES A1 - Jakob, Patrick T1 - Die Bedeutung von klassischen Elementen in virtueller Architektur - Untersucht am Beispiel der Wand T1 - The relevance of classical elements in virtual architecture - examined by the example of the wall N2 - Die Dissertation exploriert und evaluiert die Definition einer Entsprechung der architektonischen Kategorie der Wand für virtuelle Architekturen. Es wird der Frage nachgegangen, inwieweit eine architektonische Strukturierung in der virtuellen Architektur fortzuführen ist, um Handlungs- und Kommunikationsstrukturen zu sichern. Der erste Teil motiviert die Arbeit und vermittelt die Grundlagen und Termini, die in einem direkten Zusammenhang mit der virtuellen Architektur verwendet werden. Der folgende Teil konzentriert sich ausschließlich auf die reale Architektur. Ausgehend vom Element der Wand wird, in einer analytischen und architekturtheoretischen Betrachtung, ein Modell von Raumkategorien entwickelt, welches im Hinblick auf die virtuelle Architektur von besonderer Bedeutung ist. Die aus der Analyse gewonnen Erkenntnisse in Form von Raumkategorien werden im dritten Teil aus der realen in die virtuelle Architektur übertragen. Das folgende Kapitel beschreibt drei Experimente, die Fra-gen, Hypothesen und Ansätze aus den vorangegangenen Kapiteln empirisch evaluieren. Im abschließenden Kapitel werden die Erkenntnisse der experimentellen Untersuchung im Kontext des architektonischen Gestaltens von virtuellen Architekturen diskutiert. N2 - The dissertation explores and evaluates the definition of the architectural category of a wall in virtual architecture. The question to what extent architectural structure can be followed in virtual architecture so that action and communication structures can be transposed is dealt with. The first part motivates the paper and defines the basis and terminology which are used in a direct context with virtual architecture. The following part focuses exclusively on real architec-ture; it reviews the element of the wall under an analytic and theoretical view-point. Moreover, a model of category of space is developed, which is important for virtual architecture. The knowledge gathered from the analysis, in terms of space categories, is then transposed in the third part from real into virtual architecture. The pursuant chapter describes three experiments in which questions, hypothesis and starting points from the previous chapter are empirically evaluated. In the final chapter the results of the experimental investigation are discussed in the context of architectural design. KW - Virtuelle Realität KW - Architekturtheorie KW - Navigation KW - Orientierung KW - Raumwahrnehmung KW - Architektur KW - Theorie des Raumes KW - Experimente KW - architecture KW - virtual reality KW - theory of space KW - experiments KW - theory of architecture KW - navigation KW - orientation KW - perception of space Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050708-6849 ER - TY - THES A1 - Thurow, Torsten T1 - Digitaler Architekturbestand - Untersuchungen zur computergestützten, schrittweisen Erfassung und Abbildung der Geometrie von Gebäuden im Kontext der planungsrelevanten Bauaufnahme T1 - Digital architectural representation - A step-by-step computer-aided approach for the capture and representation of building data in the context of planning-oriented building surveying N2 - Die Arbeit beschreibt ein Konzept zur computergestützten, schrittweisen Erfassung und Abbildung der Geometrie von Gebäuden im Kontext der planungsrelevanten Bauaufnahme. Zunächst wird die Bauaufnahme als Erstellung eines verwendungsspezifischen Modells betrachtet. Anschließend wird der Fokus auf das geometrische Abbild gelegt. Es werden u.a. die Aufmaßtechniken Handaufmaß, Tachymetrie und Photogrammetrie bewertet und gebäudetypische geometrische Abstraktionen aufgelistet. Danach erfolgt eine Aufstellung von Anforderungen an ein computergestütztes Aufmaßsystem, welche mit kommerziellen Lösungen aus dem nichtgeodätischen Bereich verglichen wird. Im Hauptteil wird das zu Beginn genannte Konzept beschrieben. Betrachtet wird die skizzenbasierte Erstellung eines nichtmaßlichen geometrischen Abbildes des Gebäudes in den Frühphasen der Bauaufnahme, seine anschließende schrittweise maßliche Anpassung an das Original und topologische Detaillierung im Zuge des Bauaufmaßes, sowie die Extraktion von Bauteilen und ihren geometrischen Parametern. Zur Vereinfachung der maßlichen Anpassung des geometrischen Abbildes im Aufmaßprozeß werden geometrische Abstraktionen wie Parallelitäten, rechte Winkel usw. genutzt, aber nicht erzwungen. Mit Hilfe der Ausgleichungsrechnung erfolgt eine Zusammenführung der geometrischen Abstraktionen und verschiedener Aufmaßtechniken. Es werden die nötigen Beobachtungsgleichungen und andere relevante Aspekte beschrieben. Gezeigt wird weiter ein Konzept, wie ein nutzerseitig veränderbares Bauwerksmodell mit dem geometrischen Abbild in Bezug gebracht werden kann, wobei aus dem geometrischen Abbild geometrische Parameter des nutzerseitig veränderbaren Bauwerkmodells gewonnen werden können. Ausgesuchte Problematiken der Arbeit wurden prototypisch implementiert und getestet. Hierbei stand die Verbindung der Aufmaßtechniken und geometrischen Abstraktionen im Mittelpunkt. Die geometrischen Ansätze der Arbeit beschränken sich auf planare Oberflächen. N2 - The work describes a concept for the step-by-step computer-aided capture and representation of geometric building data in the context of planning-oriented building surveying. To begin with the survey is considered as the creation of a use-specific model. In following steps the focus is transferred to its geometric representation. Various surveying methods including tacheometry and photogrammetry as well as manual measurements are assessed and typical geometric abstractions for buildings identified. A requirements catalogue is then devised for a computer-aided building surveying system and compared with existing commercial solutions from non-geodetic fields. The man part of the paper describes the concept. Starting by examining the sketch-like creation of a non-geometric representation of the building in the initial building surveying phases, the paper goes on to describe how this can be increasingly adapted to fit the geometry of the actual situation and topological detail as the building surveying process continues. Individual buildings elements and their geometric data can be extracted. Simple geometric abstractions such as parallel and orthogonal orientation can be employed where necessary to simplify the adaptation of the geometric representation during the surveying process. Computational adjustment processes are employed to equate geometric data from different abstractions and surveying methods. The necessary conditional equations and other relevant aspects are detailed. A concept is described in which a user-definable building model can be related to a geometric representation, and where geometric parameters of the user’s model can be extracted based upon the geometric representation. Selected aspects of the concept have been implemented and tested as prototypes. The focus here is on the relationship between surveying technique and geometric abstraction. The geometric approach in this paper is limited to planar surfaces. KW - Bauaufnahme KW - Geometrische Modellierung KW - Ausgleichung KW - Ausgleichsrechnung KW - Tachymetrie KW - Photogrammetrie KW - Aufmaß KW - Produktmodell KW - Bauaufnahme KW - Bauwerksmodell KW - Gebäudeabbild KW - Building surveying KW - Building modelling KW - Building representation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041025-1380 ER - TY - CHAP A1 - Fruchter, Renate A1 - Demian, Peter A1 - Saxena, Kushagra T1 - Discovery of Re-usable Architecture/Engineering Construction Knowledge Trough Exploration of a Corporate Memory : Chance Discovery of Reusable AEC Knowledge from a Corporate Memory N2 - Re-using knowledge in architecture, engineering and construction (AEC) firms can lead to greater competitive advantage, improved designs, and more effective management of constructed facilities. This paper discusses the importance of exploration and discovery of reusable knowledge from a corporate archive as opposed to simple search and retrieval. We describe and illustrate through a scenario of use an exploration framework and prototype, CoMemTM that formalizes the added value of exploration in the process of knowledge reuse. We discuss two exploration activities: (i) Breadth- Only overview exploration that assist a user to rapidly localize pockets of re-usable knowledge from the large corporate archive and (ii) Iterative breadth-depth exploration that enables a user to identify those re-usable components of the Corporate Memory that may yield design issues that were not originally considered. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1932 ER - TY - CHAP A1 - El-Rayes, Khaled A1 - Kandil, Amr T1 - Distributed Computing for the Optimization of Large-Scale Construction Projects N2 - Available construction time-cost trade-off analysis models can be used to generate trade-offs between these two important objectives, however, their application is limited in large-scale construction projects due to their impractical computational requirements. This paper presents the development of a scalable and multi-objective genetic algorithm that provides the capability of simultaneously optimizing construction time and cost large-scale construction projects. The genetic algorithm was implemented in a distributed computing environment that utilizes a recent standard for parallel and distributed programming called the message passing interface (MPI). The performance of the model is evaluated using a set of measures of performance and the results demonstrate the capability of the present model in significantly reducing the computational time required to optimize large-scale construction projects. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Verteiltes System KW - Planung KW - Großbaustelle KW - Optimal Planning Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1601 ER - TY - CHAP A1 - Wellmann Jelic, Andres A1 - Baitsch, Matthias A1 - Hartmann, Dietrich T1 - Distributed computing of failure probabilities for structures in civil engineering N2 - In this contribution the software design and implementation of an analysis server for the computation of failure probabilities in structural engineering is presented. The structures considered are described in terms of an equivalent Finite Element model, the stochastic properties, like e.g. the scatter of the material behavior or the incoming load, are represented using suitable random variables. Within the software framework, a Client-Server-Architecture has been implemented, employing the middleware CORBA for the communication between the distributed modules. The analysis server offers the possibility to compute failure probabilities for stochastically defined structures. Therefore, several different approximation (FORM, SORM) and simulation methods (Monte Carlo Simulation and Importance Sampling) have been implemented. This paper closes in showing several examples computed on the analysis server. KW - Konzipieren KW - Bauwerk KW - Verteiltes System KW - Fehler KW - Stochastik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1030 ER - TY - JOUR A1 - Kicinger, Rafal A1 - Arciszewski, Tomasz A1 - De Jong, Kenneth T1 - Distributed Evolutionary Design: Island-Model-based Optimization of Steel Skeleton Structures in Tall Buildings N2 - This paper presents results of a study on distributed, or parallel, evolutionary computation in the topological design of steel structural systems in tall buildings. It describes results of extensive experimental research on various parallel evolutionary architectures applied to a complex structural design problem. The experiments were conducted using Inventor 2003, a networkbased evolutionary design support tool developed at George Mason University. First, a general introduction to evolutionary computation is provided with an emphasis on recent developments in parallel evolutionary architectures. Next, a discussion of conceptual design of steel structural systems in tall buildings is presented. Further, Inventor 2003 is briefly introduced as well as its design representation and evolutionary computation characteristics. Next, the results obtained from systematic design experiments conducted with Inventor 2003 are discussed. The objective of these experiments was to qualitatively and quantitatively investigate evolution of steel structural systems in tall buildings during a distributed evolutionary design process as well as to compare efficiency and effectiveness of various parallel evolutionary architectures with the traditional evolutionary design approaches. Two connectivity topologies (ring topology and fully-connected topology) have been investigated for four populations of structural designs evolving in parallel and using various migration strategies. Also, results of the initial sensitivity studies are reported in which two ways of initializing distributed evolutionary design processes were investigated, using either arbitrarily selected designs as initial parents or randomly generated ones. Finally, initial research conclusions are presented. KW - Mehragentensystem KW - Lernendes System KW - Stahlbau KW - Skelettbau KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2195 ER - TY - JOUR A1 - Semenov, Vitaly A1 - Bazhan, Andrew A1 - Morozov, Sergey T1 - Distributed STEP-Compliant Platform for Multimodal Collaboration in Architecture, Engineering, and Construction N2 - This paper presents an innovative software platform OpenSTEP intended to build advanced distributed integrated systems and to conduct multidisciplinary collaborative projects in both academy and industry. The paper discusses an open system architecture, methodology, component library and CASE toolkit enabling the developers to build a wide range of interoperable applications and systems compliant with STEP and, particularly, with IFC becoming the increasingly important standard for information integration in architecture, engineering and construction. KW - Framework KW - API KW - STEP KW - Verteiltes System Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2616 ER - TY - JOUR A1 - Most, Thomas A1 - Bucher, Christian A1 - Schorling, York T1 - Dynamic stability analysis of non-linear structures with geometrical imperfections under random loading JF - Journal of Sound and Vibration N2 - Dynamic stability analysis of non-linear structures with geometrical imperfections under random loading KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2004 SP - 381 EP - 400 ER - TY - JOUR A1 - Bargstädt, Hans-Joachim A1 - Blickling, Arno T1 - Effective cost estimate and construction processes with 3D interactive technologies: Towards a virtual world of construction sites N2 - The development of 3D technologies during the last decades in many different areas, leads us towards the complete 3D representation of planet earth on a high level of detail. On the lowest level we have geographical information systems (GIS) representing the outer layer of our planet as a 3D model. In the meantime these systems do not only give a geographical model but also present additional information like ownership, infrastructure and others that might be of interest for the construction business. In future these systems will serve as basis for virtual environments for planning and simulation of construction sites. In addition to this work is done on the integration of GIS systems with 3D city models in the area of urban planning and thus integration of different levels of detail. This article presents research work on the use of 3D models in construction on the next level of detail below the level of urban planning. The 3D city model is taken as basis for the 3D model of the construction site. In this virtual nD-world a contractor can organize and plan his resources, simulate different variants of construction processes and thus find out the most effective solution for the consideration of costs and time. On the basis of former researches the authors present a new approach for cost estimation and simulation using development technologies from game software. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Baubetrieb KW - Baustelle KW - Virtuelle Realität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2320 ER - TY - JOUR A1 - Kwak, Hyo-Gyoung A1 - Kim, Jin-Kook T1 - Efficient Shoring System in RC Frame Structures N2 - In this paper, systematic analyses for the shoring systems installed to support the applied loads during construction are performed on the basis of the numerical approach. On the basis of a rigorous time-dependent analysis, structural behaviors of reinforced concrete (RC) frame structures according to the changes in design variables such as the types of shoring systems, shore stiffness and shore spacing are analyzed and discussed. The time-dependent deformations of concrete such as creep and shrinkage and construction sequences of frame structures are also taken into account to minimize the structural instability and to reach to an improved design of shoring system because these effects may increase the axial forces delivered to the shores. In advance, the influence of the column shortening effect, generally mentioned in a tall building structure, is analyzed. From many parametric studies, it has been finally concluded that the most effective shoring system in RC frame structures is 2S1R (two shores and one reshore) regardless of the changes in design variables. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Skelettbau KW - Construction Sequence KW - Shoring System KW - Shore Stiffness KW - Shore Spacing Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2511 ER - TY - GEN A1 - Schiecke, Steffen T1 - Eignung alumosilikatischer Polymerbinder zur Modifizierung von Lehmbaustoffen T1 - Applicability of alumosilicatic polymer binders for mofifikation of clay containing construction materials N2 - Der Einsatz von Lehmbaustoffen stößt an Grenzen, wenn das Material Feuchtigkeit ausgesetzt ist. Die vorliegende Arbeit enthält Untersuchungen zur Verbesserung der Wasserbständigkeit von Lehmbaustoffen. Es konnte gezeigt werden, dass mittels alumosilikatischer Polymerbinder der Widerstand von Lehmbaustoffen gegen Feuchteeinwirkung erheblich verbessert werden kann. Die positiven bauklimatischen Eigenschaften werden dabei nicht negativ beeinflusst. KW - Lehm KW - Modifizierung KW - Ton KW - Anorganisches Bindemittel KW - Bindemittel KW - Wasserglas KW - Feuchtigkeit KW - Lehmbau KW - Lehmhaus KW - Metakaolin KW - Geopolymer KW - wasserbeständig KW - alumosilikatisch KW - china clay KW - alumosilicatic Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100702-15088 ER - TY - THES A1 - Meyer, Ulrich T1 - Ein Beitrag zur Bemessung von Holzrahmenbauwänden mit der Methode der Finiten Elemente T1 - A contribution to the calculation of wood-framed shear walls with the finite element method N2 - Gegenstand dieser Arbeit ist es zu zeigen, ob die Anwendung der Methode der Finiten Elemente für die Berechnungen von aussteifenden Wandkonstruktionen in Holzrahmen- bzw. Holztafelbauweise richtige und verallgemeinerbare Ergebnisse liefert und damit: · zur Bemessung von Konstruktionen dienen kann, · die Nachrechnung bestehender Konstruktionen mit von der Norm abweichenden Ausführungsdetails erlaubt und · einen Ersatz für 1:1-Versuche an Wandscheiben darstellt. Die Ergebnisse lassen sich wie folgt zusammenfassen: Unter den derzeitigen Bedingungen stellt die Methode der Berechnung mit Finiten Elementen für die Bemessung von Ein- und Zweirastertafeln, vor allem für die bautechnische Praxis, keine sinnvolle Alternative zu den in den Normen genannten Berechnungsverfahren dar. Für Ein- und Zweirastersysteme sind die Nachweisverfahren der DIN 1052 bzw. des Eurocode 5 ausreichend. Sie können durch das Berechnungsverfahren nach KESSEL sinnvoll ergänzt werden. Die Drucklastverteilung in den Vertikalrippen wird jedoch nur unzureichend erfasst. Für Konstruktionen wie die in dieser Arbeit untersuchte Mehrrastertafel stehen derzeit keine geeigneten Berechnungsverfahren zur Verfügung. Die Anwendbarkeit der FE-Methode für die Nachrechnung bestehender Konstruktionen mit von der Norm abweichenden Konstruktionsdetails konnte in dieser Arbeit nicht nachgewiesen werden. Für die FE-Modellbildung von Wandscheiben des Holzrahmenbaus wurden verschiedenen Detaillösungen gezeigt. Es wurde gezeigt, welche Konstruktionsdetails der Wandscheiben signifikante Auswirkungen auf das Gesamttragverhalten haben. Die FE-Methode kann in der in dieser Arbeit verwendeten Form zur Vorbereitung von Versuchen an 1:1-Modellen dienen und wertvolle Hinweise zum Einfluß verschiedener Konstruktionsdetails auf das Gesamttragverhalten der Wandtafel liefern, um gezielt Veränderungen vornehmen zu können. Insofern stellen Berechnungen mit der FE-Methode eine sinnvolle Ergänzung dar. N2 - The purpose of this doctoral thesis is to find out whether the application of the method of finite elements to the calculation of shear walls in wood-frame constructions will produce results which are correct and, in a generalized form, - can serve to measure constructions - allow to check existing constructions with norm-deviating details of implementation - and provide a substitute for one-to-one experiments on shear walls. The results can be summarized as follows: Under the present conditions the calculation of one-sheet and two-sheet structures using the method of finite elements does not provide a reasonable alternative to the methods of calculation given in the standards, particularly not for the practical purposes of building industry. For one-sheet and two-sheet structures the investigation methods given in DIN 1052 and in Eurocode 5, respectively, are sufficient. They can be supplemented by the calculation methods given in Kessel in a reasonable way. However, the determination of the load distribution on the vertical studs will not be satisfactory. For constructions such as the multi-sheet structures that are examined in this thesis there are at present no suitable methods of calculation available. Furthermore, it was not possible to prove the applicability of the method of finite elements to the checking of existing constructions with norm-deviating details of implementation. For modelling shear walls in wood-frame constructions various details of solutions are presented. It is shown which details of implementation have significant effects on the overall leading capacity of the shear walls. The method of finite elements in the form used in this investigation can serve to prepare experiments on one-to-one models and can provide valuable data indicating the influence of various details of implementation on the overall loading capacity of a shear wall. This will make it possible to change the experimental set-up in a systematic way. In so far, calculations by means of the model of finite elements provide useful supplementary data. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 4 KW - Holzrahmenbau KW - Holztafelbau KW - Holzrahmenbauwände KW - wood-frame construction KW - wood-framed shear walls Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050307-4022 ER - TY - JOUR A1 - Abdalla, Jamal T1 - Elements of an Agent-based Mediative Communication Protocol for Design Objects N2 - Integrated structural engineering system usually consists of large number of design objects that may be distributed across different platforms. These design objects need to communicate data and information among each other. For efficient communication among design objects a common communication protocol need to be defined. This paper presents the elements of a communication protocol that uses a mediator agent to facilitate communication among design objects. This protocol is termed the Mediative Communication Protocol (MCP). The protocol uses certain design communication performatives and the semantics of an Agent Communication language (ACL) mainly the Knowledge and Query Manipulation Language (KQML) to implement its steps. Details of a Mediator Agent, that will facilitate the communication among design objects, is presented. The Unified Modeling Language (UML) is used to present the Meditative protocol and show how the mediator agent can be use to execute the steps of the meditative communication protocol. An example from structural engineering application is presented to demonstrate and validate the protocol. It is concluded that the meditative protocol is a viable protocol to facilitate object-to-object communication and also has potential to facilitate communication among the different project participants at the higher level of integrated structural engineering systems. KW - Mehragentensystem KW - Lernendes System KW - Kommunikationsprotokoll Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2207 ER - TY - THES A1 - Ressel, Oliver T1 - Entscheidungshilfen für die Planung von Anlagen zum naßmechanischen Recycling von Betonrestmassen T1 - Recycling of concrete wastes N2 - Trotz der weiten Verbreitung erfolgt die Planung der Restbetonrecyclinganlagen immer noch durch learnig-by-doing, da verfahrenstechnisches Grundlagenwissen nicht vorliegt. Wer an verantwortlicher Stelle die Investition in eine neue oder in die Verbesserung einer bestehenden Restbetonrecyclinganlage beurteilen soll, steht vor einer komplexen Entscheidung, die unter Berücksichtigung unterschiedlichster Kriterien getroffen werden muss. In der Praxis besteht hinsichtlich der Qualitätssicherung der Recyclingprodukte, der Ablagerungen der noch reaktiven Zementpartikel, der Bemessung der eingesetzten Maschinen, der praktikablen Handhabung hinsichtlich einiger Detailprobleme sowie der Anordnung der verfahrenstechnischen Komponenten in Bezug zur Geländeoberkante weitgehend Unklarheit. Das allgemeine Verlangen nach einer durchdachten Entscheidungshilfe und die Notwendigkeit, zu einem sachlich begründeten Urteil zu kommen, macht Entscheidungshilfen für die Planung von Restbetonrecyclinganlagen erforderlich. Insbesondere da Fehlentscheidungen nicht nur mit großem Aufwand rückgängig gemacht werden können. Hierfür wurden 18 maßgebliche Entscheidungskriterien entwickelt. Diese Entscheidungskriterien wurden im Rahmen der Nutzwertanalyse als Projektziele entwickelt. Die erarbeiteten Kriterien einteilen: - Kriterien zur Qualitätssicherung bei der Verwendung der Recyclingprodukte Für die Wiederverwendung der Recyclingprodukte Restwasser und Restbetonzu- schlag sind im technischen Regelwerk Verfahrensweisen vorgechrieben. Hinsichtlich der Prozesse bei der Wiederverwendung konnten deutliche Ver- besserungspotentiale aufgezeigt werden. Besonders die Anwendung von online- Dichtemessverfahren im Vergleich zur Aräometermessung verbessert die Len- kungsprozesse zur Qualitätssicherung. Aber auch die weitere Klassierung oder das getrennte Lagern und Dosieren des Restbetonzuschlags im Vergleich zu der im technischen Regelwerk vorgeschriebenen Verfahrensweise des volumetrischen Abschätzens bringt Verbesserungspotential. - Kriterien zur Minimierung von Ablagerungen Noch reaktive Zementpartikel kommen zeitweise permanent mit Anlagen- komponenten, Leitungen und Beckeninnenflächen der Recyclinganlage in Be- rührung. Ablagerungen von Zementpartikeln, die den Betrieb der Anlage be- hindern, verschlechtern oder sogar verhindern, sind unvermeidbar. Aller- dings kann, wie im Rahmen dieser Arbeit gezeigt wurde, eine Minimierung der Ablagerungen durch geeignete Maßnahmen herbeigeführt werden. Die Ablage- rungen im Suspensionsbeckenlassen sich durch den Zustand der homogenen Suspension sowie durch das Strömungsbild angepasste Formgebung minimieren. Durch die geeignete Gefällewahl und vor allem durch die korrekte Wahl der Pumpenart können die Ablagerungen in Leitungen minimiert werden. - Kriterien zur Bemessung der verfahrenstechnischen Apparate Die Auslegung der Recyclinganlage hinsichtlich der Auswaschleistung, der Rührerleistung und der Größe des Suspendierraumes erfolgt bisher anhand von praktischen Erfahrungswerten. In dieser Arbeit wurde für die Auswasch- leistung ein allgemeingültiges Berechnungsmodel hergeleitet. Darüber hinaus wurde gezeigt, dass die Rührerleistung für das Suspendieren von Restwasser berechnet werden kann. Die Größe des Suspendierraumes kann unter Be- rücksichtigung der zu- und abfließenden Materialströme berechnet werden. Das Trennverhalten des mechanischen Klassierers wurde im Rahmen einer Ver- suchsreihe mit folgenden Ergebnissen ermittelt: a. Die Klassierdurchsätze steigen mit größer werdendem Entleerdurchsatz. ufgrund der Pufferwirkung des mechanischen Klassierers, bei der die diskontinuierlich in den Aufgabetrichter gefüllte Restbetontrübe (Ent- leeren) in einem kontinuerlichen Prozess (Klassieren) durch den Trog gefördert wird, nähert sich der Klassierdurchsatz asymtotisch einem Grenzwert an. b. Das Masseausbringen rbz wird signifikant vom Klassierdurchsatz und weniger vom Entleerdurchsatz beeinflusst. c. Die Korngrößenverteilung des Restbetons, des Restbetonzuschlags und des Restwassers belegen anschaulich den erreichten Trenneffekt. d. Die Trennkorngröße steigt mit zunehmendem Klassierdurchsatz an. Diese Tendenz ist allerdings nur bei Betrachtung des "nassen" Klassier- durchsatzes signifikant erkennbar. Bei Betrachtung des "trockenen" Durchsatzes ergibt sich keine Abhängigkeit. Die Ursache hierfür ist, dass in den "nassen" Durchsatz Prozesse wie Trübeagitation und Feinkorn- konzentration indirekt eingehen. e. Der Fehlkornanteil < 125 µm im Restbetonzuschlag steigt ebenfalls mit "nassem" Klassiersatz an. f. Im Unterschied dazu bestehen für den Fehlkornanteil > 125 µm im Rest- wasser signifikante Abhängigkeiten zu Entleer- und Klassierdurchsätzen. Ursache ist der tote Fluss. - Kriterien zur Praktikabilität des Anlagenberiebes - Interdependenzen zwischen Anlagenkomponenten N2 - Recycling of concrete wastes KW - Restbeton KW - Rückbeton KW - Klassieren KW - Suspendieren KW - Concrete KW - Waste Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040511-831 ER - TY - CHAP A1 - Petersen, Michael A1 - Seewald, Gerrit T1 - Establishing of fundamentals in building projects using web services N2 - During the establishing of fundamentals in a building project a huge amount of influence factors and boundary conditions have to be investigated in order to provide the prerequisites for further planning processes. These investigative tasks are often related with a great effort concerning time and money, because there are no standardized workflows and interfaces which provide an efficient access to the necessary information related to a specific construction site. Within the fundamental investigation human and natural circumstances have to be taken into account. Thus, in this project two examples have been chosen in order to demonstrate the holistic approach for an integration and provision of georeferenced information. The developed internet-site http://www.grundlagenermittlung.de has been designed to support architects and civil engineers in early planning phases of a building project efficiently. It offers web-based services based on dynamic interfaces for a flexible search and collection of information concerning the building site. Therefore, a central Metadatabase-Server for Description, Discovery and Integration has been established which enables a registration of georeferenced services and the redirection of incoming requests to other, distributed data pools. Using this Yellow-Page concept in combination with the underlying meta-data based on the ISO 19115 standard an efficient investigation of geographical and environmental information becomes possible. KW - Bauwerk KW - Datenmanagement KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1273 ER - TY - CHAP A1 - Chen, Zhen A1 - Kong, Stephen A1 - Li, Heng A1 - Xu, Qian T1 - Evaluating IT Applications for Innovative Construction Management N2 - The construction management has been under pressure to reduce operating costs and to improve productivity using innovative information technologe (IT) solutions conformed to structural characteristics, site conditions and past experiences. Given the growing emphasis on effectiveness and efficiency in construction projects, there is an imminent need to develop a formal procedure to select the best IT application for each proposed construction project and research and development (R&D) project. As there are numerous factors that have to be considered in selecting appropriate IT in a given situation, decision-makers need to have multicriteria decision-making ability. To enable them to make the most appropriate decision in any situation, it is important that effective tools incorporating multicriteria decision-making techniques are available. In this paper, an Analytic Network Process (ANP) model is conducted for the selection of appropriate IT application for innovative construction management prior to construction or research. The paper concludes that the ANP is a viable and capable tool for conducting IT application selection in multicriteria decision-making environment. KW - Bauführung KW - Software Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-994 ER - TY - CHAP A1 - Schäffler, Michael T1 - Fachkunde des Generalunternehmers versus Fachkunde des Fachbetriebes – Praxisbericht zur Ausführung eines GU-Auftrages N2 - Möglichkeiten der Projektrealisierung: Einzelvergabe der Planungs- und Bauaufgaben, Vergabe aller Planungs- und Bauaufgaben an einen Generalunternehmer. Die frühzeitige Einbindung eines erfahrenen und fachkundigen Generalunternehmers gibt dem Auftraggeber die Möglichkeit, bei minimiertem Risiko zu einer wirtschaftlich und bautechnisch optimalen Lösung seiner Bauaufgabe zu kommen. KW - Baubetriebslehre KW - Ausschreibung KW - Öffentlicher Auftrag / Vergabe KW - Generalunternehmer Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7195 ER - TY - JOUR A1 - Staub-French, Sheryl T1 - Feature-based Product Modeling for Building Construction N2 - Current building product models explicitly represent components, attributes of components, and relationships between components. These designer-focused product models, however, do not represent many of the design conditions that are important for construction, such as component similarity, uniformity, and penetrations. Current design and construction tools offer limited support for detecting these construction-specific design conditions. This paper describes the ontology we developed using the manufacturing concept of features to represent the design conditions that are important for construction. The feature ontology provides the blueprint for the additions and changes needed to transform a standard product model into a constructionspecific product model. The ontology formalizes three classes of features, defines the attributes and functions of each feature type, and represents the relationships between features explicitly. The descriptive semantics of the ontology allows practitioners to represent their varied preferences for naming features, specifying features that result from component intersections and the similarity of components, and grouping features that affect a specific construction domain. A software prototype that implements the ontology enables practitioners to transform designer-focused product models into feature-based product models that represent the construction perspective. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Baukonstruktion KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2331 ER - TY - JOUR A1 - Milbradt, Peter A1 - Schierbaum, Jochen A1 - Schwöppe, Axel T1 - Finite Cell-Elements of Higher Order N2 - The method of the finite elements is an adaptable numerical procedure for interpolation as well as for the numerical approximation of solutions of partial differential equations. The basis of these procedure is the formulation of suitable finite elements and element decompositions of the solution space. Classical finite elements are based on triangles or quadrangles in the two-dimensional space and tetrahedron or hexahedron in the threedimensional space. The use of arbitrary-dimensional convex and non-convex polyhedrons as the geometrical basis of finite elements increases the flexibility of generating finite element decompositions substantially and is sometimes the only way to get a clear decomposition... KW - Finite-Elemente-Methode KW - Physikalisches Verfahren Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2524 ER -