TY - CHAP A1 - Dudek, Mariusz A1 - Richter, Matthias T1 - Zuverlässigkeit und strukturelle Parameter von Verkehrsnetzen N2 - Im Vortrag wird der Frage nachgegangen, inwieweit ein Zusammenhang zwischen der Zuverlässigkeit und gewissen strukturellen Parametern eines Verkehrsnetzes besteht. Das Verkehrsnetz wird hierzu als bewerteter Graph aufgefasst. Zur Analyse der Verkehrsnetzzuverlässigkeit werden die Kanten mit ihren Verfügbarkeiten (>Zuverlässigkeiten<) bewertet. Die Zuverlässigkeit des Verkehrsnetzes hat einen großen Einfluss auf die Beurteilung des Straßennetzes. Im Sinne einer Regressionsanalyse soll der Zusammenhang mit weiteren, speziell für die Betrachtung von Verkehrsnetzen entwickelten strukturellen Kenngrößen untersucht werden, das sind insbesondere die Dispersion des Verkehrsnetzes und die Unterentwicklung des Netzes. Aus der Vielzahl der theoretisch denkbaren Verkehrsnetzstrukturen spiegelt die Ring-Radius-Struktur die realen Straßennetze am besten wider. Solche Ring-Radius-Strukturen kommen in vielen Städten vor. Die Berechnung der Verkehrsnetzzuverlässigkeit erfolgt mittels eines Algorithmus, der auf dem Prinzip der vollständigen Enumeration aller möglichen Kombinationen der Verfügbarkeit bzw. Nichtverfügbarkeit der einzelnen Kanten basiert und die gewünschte Kenngröße exakt bestimmt. Obwohl der Algorithmus speziell auf eine möglichst geringe Rechenzeit ausgerichtet ist, bleibt das Verfahren doch numerisch recht aufwendig. An Hand von zehn verschiedenen Ring-Radius-Strukturen wird der Nachweis eines Zusammenhangs zwischen den strukturellen Kenngrößen und der Verkehrsnetzzuverlässigkeit geführt. Damit können mittels struktureller Bewertungen (die mit einem vergleichsweise geringen Aufwand an Input-Daten und Rechenzeit bestimmbar sind) Aussagen über die Zuverlässigkeit des Verkehrsnetzes getroffen werden. KW - Verkehrsnetz KW - Zuverlässigkeit KW - Graph KW - Regressionsanalyse Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2951 ER - TY - CHAP A1 - Biehounek, Josef A1 - Grolik, Helmut T1 - Zur voll-probabilistischen Verallgemeinerung des Kraftgrößenverfahrens N2 - Die Versagenswahrscheinlichkeit nach einem Grenzzustand wird gewöhnlich mit dem Integral I der Basisvariablen-Verteilungsdichte über den Versagensbereich bestimmt. Dabei ist eine geschlossene Lösung nur im Spezialfall normalverteilter Basisvariablen bei Linearität der Grenzzustandsgleichung möglich. In anderen Fällen sind verschiedene Näherungsverfahren gebräuchlich, die auf den Momenten der Basisvariablen und geeignet gewählten Indizes als Sicherheitskenngrößen beruhen. Eine größere Genauigkeit bieten die Zuverlässigkeitstheorien erster bzw. zweiter Ordnung, die ebenfalls von I ausgehen. Im Beitrag wird ein neuartiges Verfahren vorgestellt, dessen Ausgangspunkt nicht I, sondern das Kraftgrößenverfahren als einem Standardalgorithmus des konstruktiven Ingenieurbaus ist. Die Einbeziehung der maßgebenden Zufallsgrößen in die Matrix der Vorzahlen und die Belastungszahlen führt zur Verallgemeinerung des Systems der Elastizitätsgleichungen zum zufälligen System der Elastizitätsgleichungen. Dessen Lösung, die durch den Übergang zu einem deterministischen Ersatzsystem gewonnen wird, liefert die statisch Unbestimmten als Funktionen der im System wirkenden Zufallsgrößen (z.B. E-Modul der Stäbe und Belastung). Da dieser Zusammenhang analytisch vorliegt, kann die Wirkung einzelner Zufallseinflüsse auf die statisch Unbestimmten und die daraus folgenden sicherheitsrelevanten Zustandsgrößen beurteilt werden. Die Dichtefunktion der Grenzzustandsgleichung kann berechnet oder durch Simulation ermittelt werden. Daraus folgt . Nicht normalverteilte Zufallsgrößen werden durch Entwicklung in orthogonale Polynome Gaußscher Zufallsgrößen berücksichtigt. KW - Kraftmethode KW - Versagen KW - Wahrscheinlichkeitsrechnung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5728 ER - TY - CHAP A1 - Schutte, Gerrit T1 - Zur Ermittlung von Spannungen am Rand eines elastischen Kontinuums N2 - Für den Entwurf von Ingenieurbauten ist eine zuverlässige Prognose über den Spannungsverlauf im Bauwerk und auf dessen Rand von großer Bedeutung. Eine geschlossene Lösung der elastischen Bestimmungsgleichungen des Bauwerks ist in der Regel nicht verfügbar. Es wird daher unter Verwendung der Methode der gewichteten Reste eine schwache Form der Gleichungen abgeleitet, die zu einem gemischten Arbeitsprinzip führt. Das zugehörige Finite-Elemente-Modell erlaubt es Spannungen am Rand des Bauwerks zu ermitteln, die im Gleichgewicht zu den angreifenden Lasten stehen. KW - Kontinuum KW - Elastizitätstheorie KW - Randspannung KW - Finite-Elemente-Methode Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6135 ER - TY - JOUR A1 - Dudek, Mariusz T1 - Zur Bewertung der Struktur von Verkehrsnetzen N2 - In diese Veröffentlichung werden die Kennziffern dargestellt, die zur Beurteilung der Struktur von Verkehrsnetzen behilflich sein können. Zu diesem Zweck wurde die Graphentheorie angewendet. Eine erste Gruppe von Bewertungen stützt sich auf die Anzahl der Knoten und Bögen des Netzes. Detailliertere Informationen über Engpässe oder Schwachstellen im Verkehrsnetz erhält man durch die Analyse der Kantenzusammenhangs. Die Unabhängigkeit der einzelnen Verkehrsarten , ihre Bewertung und Maßnahmen, sie zu verbessern werden vorgeschlagen und diskutiert. Weiteren Untersuchungen werden angeregt. KW - Verkehrsnetz KW - Kennzahl KW - Bewertung KW - Graphentheorie Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4634 ER - TY - CHAP A1 - Köppler, H. A1 - Roos, Dirk A1 - Burkhardt, Gerhard T1 - Zur Berechnung vielschichtiger Schalen mit orthotropen Schichten N2 - Wirklichkeitsnahe Erfassung und Beschreibung des Trag- und Verformungsverhaltens von Strukturen baulicher Anlagen hat in den letzten Jahrzehnten ständig an Bedeutung gewonnen. Konstruktionen im Hoch- und Industriebau werden zunehmend multifunktional genutzt - die >Grenzen< zwischen Bauwerk und Tragwerk, zwischen Hüll- und Tragkonstruktion lösen sich auf. Werden raumabschließende Elemente (Wände, Decken, Dächer) gleichzeitig als Tragelemente und wärme- und schalldämmende Konstruktionen ausgeführt, so entstehen beispielsweise Sandwichplatten, deren Schichten sehr stark differierende Materialeigenschaften aufweisen. Beim Aufbau des FEM-Modells für vielschichtige Schalen können die Formänderungshypothesen für jede Schicht einzeln als auch für die Schale insgesamt gegeben werden. Im ersten Fall ist der Knotenfreiheitsgrad von der Schichtenzahl abhängig, im zweiten Fall nicht. Im weiteren wird eine Formänderungshypothese für das Schichtenpaket angenommen. Ausgegangen wird von den Gleichungen der 3D-Elastizitätstheorie. Die Berücksichtigung der Querkraftschubverformungen ergibt die Möglichkeit einer adäquaten Beschreibung der Verformungen sowohl dünner Schalen als auch von Schalen mittlerer Dicke; die Berechnung der Krümmungen und der LAMEschen Parameter der Bezugsfläche zu umgehen, was für komplizierte Schalenformen eine selbständige Aufgabe ist; eines natürlichen Übergangs von homogenen zu geschichteten Schalen. Das vielschichtige isoparametrische Schalen-FE wird vorgestellt, seine Implementierung in das in Entwicklung befindliche Programmsystem SLANG wird vorbereitet. KW - Schale KW - Sandwichbauweise KW - Orthotropes Bauteil KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4379 ER - TY - JOUR A1 - Krzizek, H. T1 - Zur bauingenieurgerechten Speicherung von Entwurfsplänen des konstruktiven Ingenieurbaues in Datenbanken N2 - Es wird gezeigt, daß im allgemeinen die Zeichnungsinhalte von Entwurfsplänen im konstruktiven Ingenieurbau in Teilzeichnungen zerlegt werden können, denen fachspezifische Objekte des Bauwesen entsprechen. Solche Objekte sind beispiels- weise Querschnitte, Träger, Stützen und Fundamente. Diese Teilobjekte werden durch eine unterschiedliche Anzahl von Parametern festgelegt werden. Wählt man für diese Parameter die entsprechendnen Fachbegriffe, so hat man durch diese die Möglichkeit die Teilobjekte auch in Datenbanken zu speichern. Neben den Sachparametern müssen auch zeichnungs- technische Werte, wie Maßstab, gewählte Längeneinheiten (m,cm..) und Einsatzpunkt - für die Lage des Teilobjektes im Gesamtplan - gespeichert werden. Zeichenmodule für jedes Teilobjekt können dann bei Aufruf eines bestimmten Planes aus den Daten der Datenbank die Teilzeichnungen generieren, sodaß eine Planspeicherung in der übliche Speicherform (Speicherelemente Punkt, Linie usw.) nicht mehr erforderlich ist. Neben der reinen Darstellung können die Programmodule auch dahingehend erweitert werden, daß auch die zugehörigen Berechnungen durchgeführt werden. Die numerischen Ergebnisse wie auch die Eingabewerte werden in einem alfanumerischen Dokument abgelegt. Damit ergibt sich dann ein Konstruktionsystem für den Entwurf, das insbesondere die Berechnung von Varianten sehr erleichertert. In Sonderfällen können auch die Pläne in ein Standard CAD Programm eingelesen werden, um allfällige Besonderheiten interaktiv zu ergänzen. Das relationale Modell wird weiters vorgestellt, nach dem die Zeichnungsinhalte gespeichert werden. Neben reinen Teilobjektsätzen werden auch Tabellensätze verwendet, um unter einem Namen mehrere numersiche Daten verwalten zu können. Es werden auch sogenannte Fort- setzungssätze besprochen, die in Entsprechung der stark unterschiedlichen Anzahl der Objektattibute verwendet werden. KW - Ingenieurbau KW - Bauzeichnung KW - Datenbankverwaltung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4850 ER - TY - CHAP A1 - Biehounek, Josef A1 - Grolik, Helmut A1 - Herz, Susanne T1 - Zur Anwendung von Chaos-Entwicklungen in der Tragwerksstatik N2 - Seit mehr als fünfzig Jahren werden zur Untersuchung der Tragwerkssicherheit auch Methoden der Wahrscheinlichkeitsrechnung herangezogen. Ungeachtet der inzwischen erreichten Fortschritte und der offensichtlichen Vorzüge, konnte dieses Vorgehen in der Praxis bis jetzt noch nicht ausreichend Fuß fassen. Im Beitrag wird das Problem der Tragwerkssicherheit mit einem neuartigen Verfahren behandelt. Im Unterschied zu den üblichen probabilistischen Methoden geht es nicht von Verteilungsfunktionen aus. Vielmehr werden die maßgebenden Zufallsgrößen in den Mittelpunkt gestellt und direkt in die Rechenvorschrift eingeführt. Als mathematisches Hilfsmittel dienen die WIENERschen Chaos-Polynome. Sie stellen im Raum der Zufallsgrößen mit beschränkter Varianz eine Basis dar, mit der sich eine beliebige Zufallsgröße nach orthogonalen Polynomen GAUSSscher Zufallsgrößen entwickeln läßt. So entsteht ein effektiver Formalismus, der sich eng an die herkömmliche Deformationsmethode anlehnt und als deren probabilistische Verallgemeinerung angesprochen werden darf. Die Methode liefert die Grenzzustandsbedingung als Funktion der auf das Tragwerk wirkenden Zufallsgrößen. Die Versagenswahrscheinlichkeit kann daher durch Monte-Carlo-Simulation bestimmt werden. Die mit der Auswertung des Wahrscheinlichkeitsintegrals der First Order Reliability Method (FORM) verbundenen Schwierigkeiten werden vermieden. An einem Beispieltragwerk wird dargestellt, wie sich Veränderungen gewisser Konstruktionsparameter auf die Versagenswahrscheinlichkeit auswirken. KW - Baustatik KW - Sicherheit KW - Zufallsvariable KW - Chaostheorie Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2784 ER - TY - CHAP A1 - Dudek, Mariusz A1 - Rudnicki, Andrzej A1 - Hempel, Lorenz T1 - Zum Zusammenhang zwischen strukturellen und funktionellen Parametern eines Verkehrsnetzes N2 - Im Vortrag wird der Frage nachgegangen, inwieweit zwischen den strukturellen Parametern Dispersion eines Verkehrsnetzes bzw. der Kennziffer der Unterentwicklung eines Verkehrsnetzes und den mittleren Fahrzeiten bzgl. unterschiedlicher Verkehrsbedarfsmatrizen ein Zusammenhang besteht. An Hand von 10 verschiedenen Ring-Radius-Strukturen für den MIV (Motorisierter Individual-Verkehr) und 3 verschiedenen Ring-Radius-Strukturen für den Busverkehr wird bei 5 unterschiedlichen O-D-Bedarfsmatrizen der Nachweiß eines solchen Zusammenhanges geführt. Die Ergebnisse erlauben es, auf Grund struktureller Analysen Aussagen über funktionelle Bewertungen des Verkehrsnetzes zu treffen. Da strukturelle Bewertungen mit wesentlich geringerem Aufwand an Input-Daten und an Rechenzeit als funktionelle Bewertungen bestimmbar sind, bringt dies deutliche Einsparungen in der Planungsphase von Verkehrsnetzen mit sich. KW - Verkehrsplanung KW - Verkehrsnetz KW - Bedarfsermittlung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5985 ER - TY - CHAP A1 - Hartmann, Friedel A1 - Maucher, Roland T1 - Zum Momentengleichgewicht bei Tragwerksberechnungen nach Theorie zweiter Ordnung N2 - Es wird gezeigt, daß zur Aufstellung eines korrekten Momentengleichgewichts nach Theorie zweiter Ordnung für Querkräfte die Hebelarme des unverformten Systems und für Normalkräfte Hebelarme des verformten Systems zu benutzen sind. Im Allgemeinen ist es aber nicht möglich, die Knotenverformungen eines Rahmens in relevante und nicht relevante Anteile zu zerlegen, so daß ein Momentengleichgewicht bei Berechnungen nach Theorie zweiter Ordnung im Allgemeinen nicht sinnvoll ist. KW - Baustatik KW - Theorie zweiter Ordnung KW - Biegemoment KW - Gleichgewicht Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4336 ER - TY - JOUR A1 - Donath, Dirk A1 - Petzold, Frank T1 - Zukünftige Techniken für eine computergestützte Planungspraxis - applikative Tools für die architektonische Bestandserfassung N2 - Der Beitrag beschreibt die Entwicklung eines Softwaresystems zur strukturierten Erfassung und Verwaltung bestehender Gebäude in der Architektur. Die Erfassung erfolgt durch die Aufnahme von geometrischen Daten und Sachdaten in unterschiedlichen Abstraktionsstufen unter Einbeziehung einer vorangehenden Dekomposition. Basis für die Entwicklung eines solchen Systems ist die Analyse und Systematik der Erfassungstechniken, -abläufe und der Gegenstand der architektonischen Bestandsaufnahme. Parallel hierzu erfolgt die Bewertung und Nutzung aktueller Techniken und Werkzeuge der applikativen Informatik. Schwerpunkte der Forschungsarbeit sind die Ableitung einer allgemeinen Gebäude- und Bauteilstruktur, die Einbeziehung aktueller informationstechnischer Verfahren und Werkzeuge und die Entwicklung eines entsprechenden Experimentalsystems. Auf eine Auswahl softwaretechnischer Entwicklungen wird näher eingegangen (objektspezifische Eigenschaften, flexible Geometrieerfassung und Benutzeroberflächen). KW - Bauaufnahme KW - Bauplanung KW - Computerunterstütztes Verfahren Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4962 ER - TY - CHAP A1 - Kang, Julian A1 - Lho, Byeong-Cheol A1 - Kim, Jeong-Hoon T1 - XML-based Vector Graphics: Application for Web-based Design Automation N2 - Most retaining walls and box culverts built for arterial road construction are simple, and the design process of these structures is often repetitive and labor-intensive because they are so similar in structural configuration. Although some integrated design automation systems developed for retaining walls and box culverts have expedited the design process of these structures, the process of collecting and distributing the resultant engineering documents has not been fully integrated with the computer applications. We have been developing a Web-based design automation system to manage the resultant documents as well as to speed up the repetitive design process. Manipulation of engineering drawings in the Web page is one of the critical functions needed for Web-based design automation. eXtensible Markup Language (XML) and XML-based vector graphics are expected to facilitate the representation of engineering drawings in the Web page. In this paper, we present how we used XML and Scalable Vector Graphics (SVG) to compose engineering drawings and represent them in the Web page. XML Data Island we designed to define drawing components turned out effective in manipulating the engineering drawings in the Web page. KW - Architektur KW - Verteiltes System KW - XML Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1872 ER - TY - CHAP A1 - Molkenthin, Frank T1 - WWW based Simulation Systems and Project Platforms in Civil Engineering N2 - The availability of the WWW technology and the introduction of the Internet as basic resource like water, electricity or gas changes dramatically normal live, business and of course civil engineering. New technologies enable innovative technical solutions and offer new potential for improvements towards support of humans nature appropriate ways of working. This demands a new culture of work and collaboration. To contribute to theses challenges is a matter the discipline 'Bauinformatik' by supporting related research, development, education and training in civil engineering. This contribution to the IKM Conference 2000 in Weimar sketches selected research and education activities of the institutes of the authors on the topics of WWW based simulation systems (example WEASEL) and of WWW based project platforms (projects MorWin and TaiGer as well as an European education experiment). Both topics supports the collaboration by new ways of tele cooperation in international, heterogeneous and interdisciplinary engineering. Demonstration from this developments and projects will be used to illustrate the dimension of changes in civil engineering in due to modern ICT. KW - Bauwesen KW - Informatik KW - Modellierung KW - Dialogprogrammierung KW - Internet Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5972 ER - TY - JOUR A1 - Cerovsek, Tomo A1 - Turk, Ziga T1 - Working Together: ICT Infrastructures to Support Collaboration N2 - The paper summarizes a part of research carried out in ICCI project and provides a current review of ICT infrastructures supporting collaboration. It covers taxonomies, protocols, standards, components, typical subsystems as well as future trends and recommendation for two most important technologies with applications in AEC: (1) EIP (Enterprise information portal) – a single gateway to a company's information, knowledge base, and applications for all actors; (2) RTC (Real-Time Communication and Collaboration technologies) that provide means for asynchronous communication between geographically dislocated people using ICT. Proposed future developments are: orientation towards web services - with building information models, business intelligence, personalization, AEC information retrieval, p2p workspaces and grids. KW - Informationstechnik KW - Forschung KW - Europa KW - Teamwork Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2055 ER - TY - JOUR A1 - Haller, P. A1 - Menzel, R. T1 - Wissensbasierte Tragwerksplanung im Ingenieurholzbau mit ICAD N2 - Der Entwurf einfacher Konstruktionen stellt für den Tragwerksplaner zumeist eine Routineaufgabe dar. Üblicherweise werden Statik, Zeichnungen sowie Elementelisten separat voneinander erstellt. Das Programmsystem ICAD bietet die Möglichkeit, diese Arbeiten in einer Bearbeitungsstufe durchzuführen. Die Programmierung der Bemessung, Darstellung und Auswertung von Bauteilen wird mit dem Editor Emacs vorgenommen, die grafische Umsetzung des compilierten Quelltextes erfolgt im ICAD-Browser. Innerhalb dieser Benutzeroberfläche steht eine Reihe von Werkzeugen für die Eingabe und Visualisierung von Daten zur Verfügung. Betrachtet man die zu bearbeitenden Bauteile und Anschlüsse als bekannte Konstruktionen des Ingenieurholzbaus, für die es eine festgelegte Anzahl von Abmessungen und Kennwerten gibt, so läßt sich jede dieser Konstruktionen als eigenständiger Modul programmieren. Der Tragwerksplaner ist somit in der Lage, aus einem Katalog an Bauteilen und Anschlüssen die Gesamtkonstruktion zusammenzustellen. Allgemeingültige Kennwerte, Berechnungsverfahren und häufig verwendete Unterprogramme stehen modular als Wissensbasis zur Verfügung und werden von den einzelnen Tragelementen bedarfsgerecht eingebunden. Eine weitere Möglichkeit der wissensbasierten Tragwerksplanung stellt die sogenannte Multi-Criteria-Analyse dar. Bei diesem Verfahren nimmt das Programm selbständig eine Entscheidungsfindung für eine oder mehrere günstige Konstruktionslösungen vor. Dazu sind lediglich Wichtungen verschiedener Randbedingungen durch den Anwender erforderlich. KW - Ingenieurholzbau KW - Tragwerk KW - CAD KW - Lernendes System Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4976 ER - TY - JOUR A1 - Steinhage, V. T1 - Wissensbasierte Mustererkennung zur Erfassung von Bauplänen N2 - Due to technological progress and European standardization (e.g. ISO certification) there is an increasing demand to automate the digital recording of building plans. Currently there are two approaches available: (1) labour-intensive redrawing with digitizing tablets or by screen digitizing, (2) automatic scanning and vectorizing where vectorization generally demands an interactive follow-up treatment due to incomplete or ambigues results. This paper proposes a knowledge-based approach for building plan analysis. The procedure reveals the following processing steps: scanning of the building plan, enhancing the image quality and binarization, extraction of lines, line junctions and character fields, knowledge-based interpretation and grouping of image features to domain specific feature aggregates like door symbols, stair symbols etc., optical character recognition and lexicon-based interpretation of character fields, matching of feature aggregates with dimension sets. First results of a prototype implementation are presented. At last an extension of the approach towards a semantic modeling concept showing a coupling between 3D object modeling and an explict 2D modeling of images and technical drawings is presented KW - Bauzeichnung KW - Mustererkennung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4881 ER - TY - CHAP A1 - Kuwata, Hitoshi A1 - Shinozaki, M. T1 - Web-based System for Visualization of Distribution Patterns of Solar Energy and Sky Factor on Outdoor Open Spaces N2 - This study aims at constructing the simulation system of distribution patterns of solar irradiance, sunshine duration and sky factor with the user-friendly interface and sharing this system with users on the Internet. The characteristics of this simulation system are as follows: (1) Web-based user interface, (2) Accessible system through the Internet and (3) Sunlight and skylight simulation based on physically accurate equations with considering various sky conditions and the reflection from the surface of objects. As a case study, impact of the development plans are analyzed and evaluated using this system. Solar irradiance, sunshine duration and sky factor are calculated at the surface of the buildings and open spaces every 10 minutes from 8 to 16 on the winter solstice. The values of these indices are expressed as the ratio to those calculated under the condition with no buildings. In conclusion, this web-based simulation system can be useful for visualizing the sunlight and skylight conditions on outdoor open spaces and the surface of the buildings to evaluate development plans objectively. Users can make access to the system from almost all of the computers connected with the Internet and modify parameters by themselves to get desirable results. Further improvement of the user interface is necessary using more advanced technology of CGI, Java and JavaScript. KW - Sonnenstrahlung KW - Sonnenscheindauer KW - Modellierung KW - Internet KW - Himmelslichtquotient Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6026 ER - TY - CHAP A1 - Molkenthin, Frank T1 - Web-based Information Systems: Data Monitoring, Analysis and Reporting for Measurements and Simulations N2 - This paper describes the concept, implementation and application of the Web-based Information System ‘Turtle’ for data monitoring, analysis, reporting and management in engineering projects. The system uses a generalised object-oriented approach for information modelling of physical state variables from measurements and simulations by sets of tensor objects and is implemented platform-independently as a Web application. This leads to a more flexible handling of measurement and simulation information in distributed and interdisciplinary engineering projects based on the concept of information sharing. The potential and advantages of Web-based information systems like ‘Turtle’ are described for one selected application example: a measurement programme dealing with the physical limnology of Lake Constance. KW - Mobile Computing KW - Funknetz KW - Informationssystem KW - World Wide Web Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1184 ER - TY - CHAP A1 - Molkenthin, Frank T1 - Web-based Collaborative Engineering based on Information Sharing - HydroWeb: An Education Experiment in the Internet N2 - This paper describes the concept and experiences of the international Open Distance Learning Course ‘HydroWeb’. This course deals with the introduction of Web-based Collaborative Engineering in standard education programmes of water related engineering and civil engineering based on information sharing. Organized under the umbrella of IAHR and ETNET21 this course is collaboration from several universities from all over the world. Started in 1999 the course demonstrates the potential and innovative opportunities of Web-Technology in education, research and engineering: Students from the different partner universities form small distributed teams to solve a given engineering problem in a time window of two weeks. To overcome the spatial distribution the students apply modern Web technology such as video conferencing, application sharing and document management. All results as well as the final reports are presented as Web document on a shared Web-based project platform (http://www.hydro-web.org). Besides the experiences to apply standard Web tools and working methods based on information sharing instead the conventional information exchange in the daily engineering work the students improve their soft skills operate successfully in international and interdisciplinary project environments as part of the ‘Technical Culture’ of nowadays. KW - Architektur KW - Verteiltes System KW - Informationsaustausch KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1869 ER - TY - CHAP A1 - Alda, Sascha A1 - Cremers, Armin B. A1 - Meißner, Udo F. T1 - Wahrnehmung und Verarbeitung von Ereignissen bei der verteilten Planung im baulichen Brandschutz T1 - Holistic Support for the Collaborative Planning of Fire Protection Concepts in Building Design N2 - Der Bauplanungsprozess ist durch ein hohes Maß an Kooperation zwischen Planungsbeteiligten verschiedener Fachrichtungen gekennzeichnet. Hierbei werden zum einen Planungen auf der Basis von Planungsinformationen anderer Planungsbeteiligter detailliert, zum anderen geben Planungen einzelner auch wichtige Rahmenbedingungen für die Gesamtplanung vor. Der vorliegende Beitrag beschreibt einen Ansatz zur ganzheitlichen Unterstützungen verteilter Planungen am Beispiel des baulichen Brandschutzes. Der Antrag trägt hierbei der verteilten und parallelen Planung Rechnung, wie sie heute bei der Planung großer und mittlerer Bauwerke angewendet wird. Die Verteiltheit wird nicht nur für die Planungsbeteiligten modelliert, sondern auch die einzelnen Planungsinformationen liegen im gemeinsamen Kooperationsverbund verteilt vor. Der Fokus dieses Beitrags liegt auf der Wahrnehmung von Planungsänderungen und Ereignissen während der Planung und die Verarbeitung dieser Informationen um eine durchgängige Planung zu gewährleisten. Dies wird zum einen durch das CoBE Awarenessmodell erreicht, mit dem Ereignisse erkannt und dem Informationsverbund zur Verfügung gestellt werden können. Zum anderen werden die Ereignisbehandlung und die darauf folgende fachgerechte Informationsverarbeitung mit Hilfe eines Multi-Agentensystems beschrieben. KW - Bauplanung KW - Softwaresystem KW - Netzwerk KW - Brandschutz KW - Verteiltes Softwaresystem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-158 ER - TY - CHAP A1 - Miles, John A1 - Taylor, Mark A1 - Anumba, Chimay T1 - VRML Virtual Worlds - An Alternative to the Desktop Metaphor for GUI's? N2 - Metaphors are commonly used by software developers in the creation of GUI's. This paper looks at the use of multi-user VRML to create virtual metaphors, developing a conceptual design tool that can be used intuitively with little or no training. KW - Architektur KW - Verteiltes System KW - Graphische Benutzeroberfläche KW - VRML Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1855 ER - TY - JOUR A1 - Kaapke, Kai A1 - Milbradt, Peter T1 - Voronoi-based finite volume method for transport problems N2 - Transport problems, as, for instance, the transport of sediment in hydraulic engineering and the transport of harmful substances through porous media, play an important role in many fields of civil engineering. Other examples include the dissipation of heat or sound as well as the simulation of traffic with macroscopic models. The contribution explains the analysis of the applicability of Voronoi-based finite volume methods for the approximation of solutions of transport problems. A special concern is the discretisation of the transport equation. Current limitations of the method as well as ideas for stabilisation are explained with examples. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Transport Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2558 ER - TY - JOUR A1 - Steinmann, Frank A1 - Hübler, Reinhard T1 - Vorgehensmodelle als Basis der Gestaltung durchgaengiger CAD-Systeme N2 - Für die Gestaltung einer durchgängigen Unterstützung des Entwurfsprozesses stehen gegenwärtig deskriptive Modelle der Entwurfsobjekte im Mittelpunkt der Untersuchungen. Diese Modelle gestatten das Ableiten von Repräsentationen sowie eine Weitergabe von Entwurfsergebnissen. Pragmatische Gliederungen des Entwurfsprozesses unterteilen diesen nach organisatorischen und betriebswirtschaftlichen Aspekten (Planbarkeit und Abrechenbarkeit) in eine Sequenz von Entwurfsphasen (HOAI). Diese Gliederungen berücksichtigen nicht das WIE des eigentlichen modellkreierenden Schaffensprozesses. Für ein echtes CADesign bildet dessen Klärung jedoch die erforderliche Voraussetzung. Im Beitrag wird dazu von einem vereinheitlichten Set generischer Entwurfsaktionen ausgegangen. Auch dann, wenn die verschiedenen Entwurfsphasen und die Entwurfshandlungen der einzelnen Ingenieurgewerke mit spezifische Entwurfsmodellen verbunden werden, besteht damit eine Grundlage zur methodischen Fundierung entsprechender CAD-Tools. Die methodische Verfahrensweise ähnelt der, die in Form von Styleguides zur Gestaltung von 'Graphical User Interfaces' vorgeschlagen wird. Wesentliche praktische Benutzungen solche Basisaktivitäten ergeben sich für: die Systematisierung computergestützter Entwurfshandlungen, insbesondere durch Erweiterung des deskriptiven um ein operationales Modell sowie deren erweiterte Interpretierbarkeit die Erzeugung wissensbasierter Werkzeuge zur automatischen Modellgenerierung/-konfiguration die Implementation von leistungsfähigen UNDO- bzw. TMS-Mechanismen. KW - CAD KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4568 ER - TY - CHAP A1 - Hohmann, Georg T1 - Von der Netzplantechnik zur Simulation - Analyse von Bauprozessen mit Hilfe von Petri-Netzen N2 - Nichtstationäre Baustellenprozesse sind dadurch gekennzeichnet, daß ihr Ablauf nicht vollständig vorhersehbar ist, sondern einer Vielzahl von Störungen unterworfen sein kann. Zur Planung und Steuerung dieser Prozesse sind daher Methoden erforderlich, welche u.a. eine große Anpassungsfähigkeit, die Darstellung paralleler Vorgänge, die Erfassung plötzlicher Störungen sowie stochastische bzw. unscharfe Parameter zulassen. Hiervon ausgehend wurden spezielle Simulationssysteme entwickelt. In der Praxis dient jedoch in den meisten Fällen das Balkendiagramm bzw. die Netzplantechnik als Planungshilfsmittel. Dabei ist der Informationsgehalt der Netzplantechnik eindeutig geringer gegenüber der Simulation. Auch fallen deterministische Berechnungen in der Regel zu optimistisch aus. Ein Wechsel von der Netzplantechnik zur Simulation ist möglich, indem zunächst Netzpläne auf der Grundlage von Petri-Netzen dargestellt werden und somit ein schrittweiser Übergang zur Simulation erfolgt. Neben der Modellbildung kommt der Bereitstellung realitätsnaher Parameter, die den Berechnungen zugrunde gelegt werden, eine große Bedeutung zu. Bei der Terminplanung sind Kenntnisse zu bestimmten äußeren Einflüssen (z. B. Niederschlag) oft nur in unscharfer Weise vorhanden. Hier bietet sich der Einsatz von Fuzzy-Verfahren an. Mit ihrer Hilfe lassen sich unscharfe Faktoren erfassen und in die Planung einbeziehen. Sowohl zur Darstellung von Petri-Netzen als zur Berechnung (Simulation) auf deren Grundlage sowie zur Aufbereitung der Daten mittels Fuzzy-Verfahren liegen entsprechende Rechenprogramme vor. KW - Bauablauf KW - Prozessmodell KW - Netzplantechnik KW - Petri-Netz Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4511 ER - TY - THES A1 - Tauscher, Eike T1 - Vom Bauwerksinformationsmodell zur Terminplanung - Ein Modell zur Generierung von Bauablaufplänen T1 - From Building Information Model to Construction Scheduling - A Model for the Generation of Construction Work Plans N2 - Die effiziente und zielgerichtete Ausführung von Bauvorhaben wird in hohem Maße von der zugrunde liegenden Bauablaufplanung beeinflusst. Dabei ist unter Verwendung herkömmlicher Methoden und Modelle die Planung des Bauablaufs ein zumeist aufwändiger und fehlerträchtiger Prozess. Am Ende der gegenwärtig üblichen Vorgehensweise für die Planung eines Bauablaufs erfolgt lediglich die Dokumentation des Endergebnisses. Mögliche Ablaufalternativen, die im Verlauf der Planung betrachtet wurden, sind im resultierenden Bauablaufplan nicht enthalten und gehen verloren. Eine formale Kontrolle des geplanten Bauablaufs hinsichtlich seiner Vollständigkeit ist nur begrenzt möglich, da beispielsweise existierende Methoden der 4D-Visualisierung derzeit nicht ausreichend in den Prozess der Planung von Bauabläufen integriert sind. Gegenstand der vorliegenden Arbeit ist die Entwicklung eines neuen Modells für die Unterstützung der Bauablaufplanung. Dafür wird der größtenteils manuelle Vorgang der Bauablaufplanung auf Basis verfügbarer Bauwerksinformationsmodelle (BIM) weitestgehend automatisiert und die Methodik der 4D-Animation in den Prozess der Bauablaufplanung integriert. Ausgehend von in einer Erfahrungsdatenbank gespeicherten Informationen werden auf Basis einer Ähnlichkeitsermittlung Bauteilen des betrachteten BIM geeignete Vorgänge zugeordnet und mittels Algorithmen der Graphentheorie ein Workflowgraph aller mög\-lichen Bauablaufvarianten generiert. Aufgrund der vorgenommenen Kopplung des Bauablaufplans mit Bauteilen eines BIM und der visuellen Darstellung des Bauablaufs kann vom Planer im Rahmen der Modellierungsgenauigkeit des BIM auf die Vollständigkeit des Bauablaufplans geschlossen werden. Dies ermöglicht dem Anwender ein hohes Maß an Kontrolle des geplanten Bauablaufs bereits innerhalb der Planungsphase. Weiterhin unterstützt das entwickelte Modell die Integration von Ablaufvarianten, was deren Gegenüberstellung ermöglicht und die Wiederverwendbarkeit bereits geplanter Bauabläufe durch eine entsprechend ausgerichtete Abbildung des Modells. Die Anwendbarkeit des erarbeiteten Modells wird anhand einer prototypischen Implementierung nachgewiesen und anhand eines Praxisbeispiels verifiziert. N2 - The efficient and targeted execution of construction works is greatly affected by the underlying construction schedule. By using common methods and models for construction scheduling, this process is usually error-prone and expensive. In common practice, the focus of construction scheduling is limited to the documentation of the final result. Possible construction alternatives that were considered during the planning phase are not included in the resulting construction schedule and are lost for further consideration. A formal control of the planned construction schedule in terms of completeness is very limited, since existing methods such as 4D~visualization are insufficiently integrated in the planning process. The presented work addresses the development of a new model that supports the construction planning process. Therefore, the mostly manual process of construction planning will be largely automated based on available building information models (BIM) and integrates the methodology of 4D~animation into this process. Based on information stored in a knowledge database, appropriate tasks will be assigned to building elements of the considered BIM on the basis of similarity calculations. Subsequently, a workflow graph is generated by using algorithms of graph theory. Due to the resulting logical interconnection of BIM objects and schedule processes and the visual representation of the construction building process, it becomes possible for the planner to suggest on the completeness of the construction schedule. This allows for a high degree of control over the planned construction schedule, already during the planning phase. Furthermore, the developed model supports the integration of construction alternatives into the schedule to allow their comparison as well as the reusability of already planned construction schedules by an appropriately targeted model mapping. The developed model's applicability is shown based on a prototype implementation and verified using a practical example. T3 - Informatik in Architektur und Bauwesen - 7 KW - Terminplanung KW - Scheduling KW - Informationsmodell KW - Modell KW - Bauwesen KW - Animation KW - 4D KW - BIM KW - IFC KW - Generierung KW - Bauablaufplan KW - scheduling KW - building Information model KW - generation KW - automation KW - construction schedule Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20110927-15572 SN - 978-3-86068-452-8 ER - TY - CHAP A1 - Theiler, Michael A1 - Tauscher, Eike A1 - Tulke, Jan A1 - Riedel, Thomas ED - von Both, Petra ED - Koch, Volker T1 - Visualisierung von IFC-Objekten mittels Java3D T2 - Forum Bauinformatik 2009 N2 - Die Planung komplexer Bauwerke erfolgt zunehmend mit rechnergestützten Planungswerkzeugen, die den Export von Bauwerksinformationen im STEP-Format auf Grundlage der Industry Foundation Classes (IFC) ermöglichen. Durch die Verfügbarkeit dieser Schnittstelle ist es möglich, Bauwerksinformationen für eine weiterführende applikationsübergreifende Verarbeitung bereitzustellen. Ein großer Teil der bereitgestellten Informationen bezieht sich auf die geometrische Beschreibung der einzelnen Bauteile. Um den am Bauprozess Beteiligten eine optimale Auswertung und Analyse der Bauwerksinformationen zu ermöglichen, ist deren Visualisierung unumgänglich. Das IFC-Modell stellt diese Daten mit Hilfe verschiedener Geometriemodelle bereit. Der vorliegende Beitrag beschreibt die Visualisierung von IFC-Objekten mittels Java3D. Er beschränkt sich dabei auf die Darstellung von Objekten, deren Geometrie mittels Boundary Representation (Brep) oder Surface-Model-Repräsentation beschrieben wird. KW - IFC KW - Brep KW - STEP KW - Visualisierung KW - Schnittstelle Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130107-18149 SN - 978-3-86644-396-9 SP - 149 EP - 159 PB - Universitätsverlag CY - Karlsruhe ER - TY - CHAP A1 - Thurow, Torsten A1 - Donath, Dirk A1 - Petzold, Frank T1 - Vision eines mitwachsenden Geometriemodells für die computergestützte Bauaufnahme N2 - Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. Als ein Teilaspekt wird in diesem Beitrag die Vision eines mitwachsenden Geometriemodells für das computergestützte Bauaufmaß gezeigt, welches den Aufnehmenden von der Erstbegehung an begleitet. Die bei jeder Phase der Bauaufnahme gewonnenen Geometrieinformationen sollen in den anschließenden Phasen wiederverwendet, konkretisiert bzw. korrigiert werden. Aufmaßtechniken und Geometriemodell sind dabei eng gekoppelt. Verschiedene Sichten auf ein gemeinsames Geometriemodell haben zum Ziel, den Nutzer die Vorteile planarer Abbildungen nutzen zu lassen, ohne die dreidimensionale Übersicht zu verlieren oder entsprechende räumliche Manipulationen zu missen. Das Geometriemodell ist dabei in ein dynamisches Bauwerksmodell eingebettet. Der folgende Beitrag bezieht sich auf die Bauaufnahme mit folgenden Vorgaben: - die Bauaufnahme dient der Vorbereitung der Bauplanung im Bestand - es wird nur eine Genauigkeitsstufe (im Bereich von +/- 10 cm) unterstützt - die Geometrieabbildung des aufzunehmenden Bauwerkes beruht ausschließlich auf ebenen Oberflächen KW - Bauaufnahme KW - CAD KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3655 ER - TY - JOUR A1 - Semenov, Vitaly A1 - Alekseeva, Elena A1 - Tarlapan, Oleg T1 - Virtual Construction using Map-based Approach N2 - The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Virtuelle Realität KW - Bauwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2447 ER - TY - CHAP A1 - Katzer, Wolfgang T1 - Virtual Construction for our industry – an advantage now, a necessity soon N2 - Some key facts about the economic environment of construction industry are explained. It is shown that construction industry is very heterogeneous and has changed drastically during the recent years due to a rapidly moving commercial environment. Two examples of todays’s use of virtual construction tools in construction projects are presented. The first example is the document control for a large international project. The second is the application of 4D modelling in the preconstruction phase of a dam project. It is shown that virtual construction, is a major international trend that currently takes up speed. Some generic industry needs for Research and Development which aims at short and medium term results are presented. KW - Konstruktion KW - construction industry Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1573 ER - TY - JOUR A1 - Ilieva, D. A1 - Pahl, Peter Jan T1 - Verteilte Bearbeitung von Zeichnungen im Bauwesen N2 - Eine Bauunterlage ist in der Regel an mehreren Orten vorhanden. Sie wird von verschiedenen Personen an verschiedenen Orten zu verschiedenen Zeitpunkten geändert. Die Änderungen sind häufig und in vielen Fällen von geringem Umfang. Die Verteilung solcher Unterlagen in Computernetzen, sowie die Durchführung und die Verwaltung von Änderungen stellen hohe Anforderungen an die Informations- und Kommunikationstechnik. Insbesondere ist die Konsistenz der Unterlagen unter Berücksichtigung der typischen Merkmale des Arbeitsablaufes im Bauwesen zu sichern. Im Vortrag wird ein Konzept für die Bearbeitung von Bauunterlagen, insbesondere für Zeichnungen, in Computernetzen vorgestellt. Grundlage dieses Konzeptes ist die Norm ISO 10303 STEP (The standard for exchange of product model data). Das AP 201 >Explicit draughting< der ISO 10303 wurde als Austauschformat für Zeichnungen festgelegt. Im Rahmen des Vortrages wird ein Projektmodell vorgestellt. Das Projektmodell bildet den Informationsfluß während des Bauprozesses ab und ermöglicht die Sicherung der Konsistenz einer Zeichnung während der Bearbeitung der verschiedenen Fachleute. Bei Änderung einer Zeichnung wird ausschließlich die Differenzmenge als Information übertragen. Da die Arbeitsweise des Ingenieurs im Bauwesen eine Vollauthomatisierung des Datenaustausches nicht zuläßt, werden Änderungen nur nach Entscheidung des zuständigen Fachmanns in die ursprüngliche Fassung der Zeichnung übernommen. Werkzeuge für die Unterstützung der Auflösung von Widersprüchen in einem Dokument werden vorgestellt. KW - Bauzeichnung KW - Datenbank KW - Verteiltes Datenverarbeitungssystem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4860 ER - TY - CHAP A1 - Becker, Rainer T1 - Vernetzte Embedded Systems und Visualisierung mit Java N2 - In modernen Gebäuden nimmt die Komplexität der Heizungstechnik ständig zu. Damit wird es auch immer schwieriger, ein ökologisch und ökonomisch vernünftiges Zusammenspiel der Komponenten zu gewährleisten. Die Vernetzung der verschiedenen Komponenten eines Heizsystems mittels Netzwerktechnik aus der EDV soll helfen, die Energieeffizienz zu erhöhen. Embedded Systems und Mikrocontroller fungieren als Regler für die Teilsysteme. Durch Kommunikation untereinander sollen sie ihr Regelverhalten aneinander anpassen. Eine Internetanbindung ermöglicht die Nutzung weiterer Informationen für die Betriebsführung. Außerdem kann der Internetanschluss für die Fernwartung der Anlage genutzt werden. Mit kleinen, im Webbrowser eines Rechners ausgeführten Java-Programmen, sogenannten Applets, können die Betriebszustände von Heizsystemen in Echtzeit visualisiert werden. Durch das Aufzeichnen von Betriebsdaten wird deren Analyse ermöglicht. KW - Heizung KW - Regelungstechnik KW - Netzwerktheorie Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2755 ER - TY - CHAP A1 - Rüppel, Uwe A1 - Meißner, Udo F. A1 - Greb, Steffen T1 - Vernetzte Bauprozesssteuerung auf der Basis bauteilspezifischer Prozessmuster für geotechnische Konstruktionselemente N2 - Der Beitrag basiert auf den Ansätzen und Ergebnissen des Forschungsprojekts >Prozessorientierte Vernetzung von Ingenieurplanungen am Beispiel der Geotechnik<, des DFG-Schwerpunktprogramms 1103 >Vernetzt-kooperative Planungsprozesse im Konstruktiven Ingenieurbau<. Ziel ist die Entwicklung einer netzwerkbasierten Kooperationsplattform zur Unterstützung von Ingenieurplanungen. Methodische Grundlagen hierfür stellen die Petri-Netze mit individuellen Marken in Verbindung mit einer semantischen Informationsbewertung dar. Der Beitrag zeigt an einem Beispiel die grundlegenden Möglichkeiten der Petri-Netze auf und stellt die Steuerung der Planungsprozesse aufgrund von Metainformationen dar. Darüber hinaus wird der Ansatz verfolgt, auf der Basis bauteilorientierter Prozessmuster für geotechnische Konstruktionselemente den veränderlichen Prozessablauf zu erfassen. Abschließend wird ein Weg zur Implementierung gezeigt. KW - Geotechnik KW - CAD KW - Prozessmodell KW - Rechnernetz Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3556 ER - TY - CHAP A1 - Meißner, Udo F. T1 - Vernetzt-kooperative Planung mit Computern - Grundlagen und Methoden der Bauinformatik N2 - In Anbetracht der leistungsstarken Computernetzwerke und der intensiven Globalisierung von Wissenschaft und Technik im Bauwesen ist es das Ziel der Bauinformatik, die Planungsprozesse des Konstruktiven Ingenieurbaus für die Nutzung verteilter Ressourcen zu gestalten, geeignete Kooperationsmodelle für die Fachplanung im Informationsverbund der Projektbeteiligten zu entwickeln und die kooperative Projektbearbeitung unter Nutzung verteilter Fachmodelle in Netzen zu ermöglichen. Dazu werden neue methodische Grundlagen geschaffen, welche die tiefgreifenden Veränderungen der Arbeits- und Organisationsstrukturen berücksichtigen. Vor diesem Hintergrund zeigt der Beitrag aktuelle Forschungsinhalte der Bauinformatik auf, die insbesondere im Rahmen des DFG-Schwerpunktprogramms 1103 'Vernetzt-kooperative Planungsprozesse im Konstruktiven Ingenieurbau' von verschiedenen Projekten arbeitsteilig entwickelt werden. Es wird ein integratives Prozessmodell vorgestellt, das die Grundlage für die Unterstützung der vernetzt-kooperativen Planung mit modernen Methoden der Informationsverarbeitung und Kommunikationstechnik zusammenführt. An einem Beispiel aus dem baulichen Brandschutz werden die methodischen Ansätze der Prozessmodellierung mit Petri-Netzen und der mobilen Softwareagenten zur Unterstützung der Kooperation in der Fachplanung des Bauwesens dargestellt und erläutert. KW - Bauplanung KW - Informatik Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-145 ER - TY - CHAP A1 - Bittrich, Daniel T1 - Verbunddokumente als Nutzeroberfläche von Software für die Tragwerksplanung N2 - Der Schwerpunkt von Forschung und Entwicklung auf dem Gebiet der Tragwerksplanungs-Software lag in den letzten Jahren auf der Erweiterung des funktionalen Umfangs. In der Folge ist es notwendig, den gestiegenen Funktionsumfang einem möglichst breiten Anwenderkreis durch ingenieurgemäß gestaltete Arbeitsumgebungen zugänglich zu machen, so dass ein möglichst effizientes und fehlerarmes Arbeiten ermöglicht wird. Aus der Sicht der Tragwerksplaner muss eine ingenieurgemäß gestaltete Software eine dem spezifischen Arbeitsablauf angepasste Nutzer-Software-Interaktion aufweisen. Dabei sind die benötigten Funktionalitäten in ein einheitliches System zu integrieren und eine Anpassbarkeit durch den Anwender sicherzustellen. Die Berücksichtigung dieser Anforderungen mit herkömmlichen Mitteln würde einen unverhältnismäßig hohen Entwicklungsaufwand erfordern. Infolgedessen muss aus der Sicht der Software-Entwickler eine moderne Software-Architektur für die Tragwerksplanung eine Erhöhung des Wiederverwendungsgrades und eine unabhängige Erweiterbarkeit als zusätzliche Anforderungen erfüllen. In diesem Beitrag wird ein auf Verbunddokumenten basierendes Konzept vorgestellt, mit dem eine Zusammenführung von Standard-Software und fachspezifischen Software-Komponenten zu einer ingenieurgemäßen Arbeitsumgebung ermöglicht wird. Damit kann die Analyse und die Dokumentation eines Tragelementes einschließlich der zugehörigen Datenhaltung innerhalb eines Verbunddokumentes erfolgen. Gleichzeitig kann der software-technische Wiederverwendungsgrad durch die Definition eines Component Frameworks als unabhängig erweiterbare Software-Architektur und durch den Einsatz von Software-Komponenten mit eigener Nutzeroberfläche über das bisher erreichte Niveau hinaus gesteigert werden. Die Umsetzbarkeit des Konzeptes wird durch eine Pilotimplementierung demonstriert. KW - Tragwerk KW - Baustatik KW - CAE KW - Softwareengineering Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5739 ER - TY - THES A1 - Bittrich, Daniel T1 - Verbunddokumente als Nutzeroberfläche von Software für die Tragwerksplanung T1 - Compound Documents as User Interface of Software for Structural Engineering N2 - Das Ziel der Arbeit besteht in der Entwicklung von Konzepten zur effizienten Implementierung von ingenieurgemäßer Tragwerksplanungs-Software. Der vorgeschlagene Lösungsansatz basiert auf einer optimalen Anpassung der Nutzeroberfläche an den spezifischen Arbeitsablauf, der Erhöhung des Wiederverwendungsgrades sowie der Möglichkeit der unabhängigen Erweiterbarkeit von Software-Systemen. Verbunddokumente werden als Nutzeroberfläche und Software-Architektur benutzt, um eine Zusammenführung von Standard-Software und fachspezifischen Software-Komponenten zu ingenieurgemäßer Tragwerksplanungs-Software zu ermöglichen. Die Umsetzbarkeit des Konzeptes wird durch eine Pilotimplementierung verifiziert. N2 - Objective of this work is the development of concepts for an efficient implementation of ergonomic software for structural engineering. The proposed solution is based on optimal adaption of the user interface to the specific workflow, increased software reuse and independently extensible software systems. Compound documents are utilized as user interface and software architecture, allowing the assembly of off-the-shelf software and domain specific software components to user friendly software for structural engineering. The applicability of the concepts is verified by the realization of a prototype. KW - Tragwerk KW - Planung KW - Softwareentwicklung KW - Benutzeroberfläche KW - Standardsoftware KW - Tragwerksplanung KW - Editor KW - Nutzeroberfläche KW - Verbunddokument KW - Software-Architektur KW - Software-Komponente KW - Standard-Software KW - structural design KW - editor KW - user interface KW - group document KW - software architecture KW - software component KW - standard software Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040212-229 ER - TY - CHAP A1 - Robert-Nicoud, Yvan A1 - Raphael, Benny A1 - Smith, Ian F. C. T1 - Using entropy to maximize the usefulness of data collection N2 - This paper presents a generic methodology for measurement system configuration when the goal is to identify behaviour models that reasonably explain observations. For such tasks, the best measurement system provides maximum separation between candidate models. In this work, the degree of separation between models is measured using Shannon’s Entropy Function. The location and type of measurement devices are chosen such that the entropy of candidate models is greatest. This methodology is tested on a laboratory structure and, to demonstrate generality, an existing fresh water supply network in a city in Switzerland. In both cases, the methodology suggests an appropriate set of sensors for identifying the state of the system. KW - Mobile Computing KW - Funknetz KW - Entropie Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1177 ER - TY - CHAP A1 - Parmee, Ian A1 - Abraham, Johnson T1 - User-centric Evolutionary Design Systems - the Visualisation of Emerging Multi-Objective Design Information N2 - The paper describes further developments of the interactive evolutionary design concept relating to the emergence of mutually inclusive regions of high performance design solutions. These solutions are generated from cluster-oriented genetic algorithm (COGAs) output and relate to a number of objectives introduced during the preliminary design of military airframes. The data-mining of multi-objective COGA (moCOGA) output further defines these regions through the application of clustering algorithms, data reduction and variable attribute relevance analyses. A number of visual representations of the COGA output projected onto both variable and objective space are presented. The multi-objective output of the COGA is compared to output from a Strength Pareto Evolutionary Algorithm (SPEA-II) to illustrate the manner in which moCOGAs can generate good approximations to Pareto frontiers. KW - Konzipieren KW - Bauwerk KW - Künstliche Intelligenz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1094 ER - TY - JOUR A1 - Katranuschkov, Peter A1 - Gehre, Alexander A1 - Scherer, Raimar J. T1 - User Requirements Capture in Distributed Project Environments: A Process-centred Approach N2 - Efforts to define standards for representing AEC/FM data have been fairly successful. However defining a standard reference process model has not met with the same success. Yet almost every conceptual modelling or software development project starts by defining the business processes to be supported and the related requirements to be satisfied. This paper describes a new process-centred methodology for user requirements capture developed in the ICCI project (IST-2001-33022). Its essence is in recognising user requirements and use cases in the context of the real construction process, identifying the actors and roles for each individual activity and associating these activities with information, communication and standardisation requirements on the basis of a formalised specification, named the Process Matrix. In the paper we outline the history of process matrix development, introduce the basic structure of the matrix and show how it can be further extended and refined. We present also a web-based software implementation of the developed approach, describe how it has been used in ICCI and outline further perspectives. KW - Informationstechnik KW - Forschung KW - Europa KW - Bedarfsforschung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2029 ER - TY - CHAP A1 - Korsunov, Nikolay A1 - Youriev, Alexander A1 - Nikitinskiy, Dmitry T1 - Use of neuron nets by definition deflected mode of constructions T1 - Primenenie nejronnych setej pri rascete konstrukcij N2 - At present time neuronet's technologies have got a wide application in a different fields of technique. At the same time they give insufficient consideration to using neuron nets in the field of building. Use of approximating neuron nets will allow to definite the deflected mode of constructions elements using noticeably less computing facilities then by using universal methods, finite-element method for instance. Today neuron nets are used for calculation separate elements of building constructions. In this work use of neuron nets for calculation deflected mode of construction which consists of many elements is consider. The main idea of suggested analysis is using neuron nets for calculation internal intensities and transferences pieces of model which are selected by there functional destination. For example, a plate is destine for adoption intensity distributed among area, the purpose of core is taking up surface distributed intensity. Elements involved as intensity converter. Plate serve for intensities dispersion and their transfer. A template is associated with functional destination. A template regards as composition of model elements which has define functional destinations. A single template can incarnate several functional destinations. On receipt values of components transference the estimation of their permissibility is put into practice. In the case of detection a violation of permissible limit, in the component database is making a search for component with analogous functional destination, according to the type of violation. If such component is found than a change a previous component into new one is realized. Thus besides control a condition of construction by components there is a possibility to make a search for decisions of revealed problem.... KW - Baustatik KW - Neuronales Netz Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3247 ER - TY - CHAP A1 - Raue, Erich A1 - Heidolf, Thorsten T1 - Untersuchungen zum zeitabhängigem Tragverhalten von Verbundquerschnitten mit Hilfe der Laplace – Transformation N2 - Im Stahlbeton- und Spannbetonbau kommen in zunehmendem Maße Verbundkonstruktionen aus Betonfertigteilen und Ortbetonergänzungen zum Einsatz. Die Fertigteile werden je nach Spannweite, Belastung und speziellen Anforderungen mit schlaffer oder vorgespannter Be-wehrung ausgeführt. Aufgrund der im Allgemeinen unterschiedlichen Betone der einzelnen Querschnittsanteile sowie bedingt durch den zeitlichen Versatz in der Herstellung der Fertig-teile und der Ortbetonergänzungen ergeben sich Unterschiede im Langzeitverhalten, die bei der Bemessung und Nachweisführung zu berücksichtigen sind. Das Kriechen und Schwinden der Betone als Folge des zeitabhängigen Materialverhaltens und die Spezifik des Verbund-querschnitts können für die Gebrauchstauglichkeit relevant sein, insbesondere wenn die Fer-tigteile vorgespannt sind. Eine hinreichend wirklichkeitsnahe Beschreibung des Langzeitverhaltens von Beton gestattet die Theorie des elastisch-kriechenden Körpers, wobei sich im Allgemeinen keine geschlosse-ne Lösung für bewehrte Betonverbundquerschnitte angeben lässt. Eine Alternative hierzu ergibt sich, wenn für die einzelnen Kriechintervalle ein vereinfachter Ansatz für den Verlauf der Kriechfunktion entsprechend der Theorie des Alterns getroffen wird. Dabei werden die im Zeitintervall (tj-1,tj) umgelagerten Schnittgrößen als neue Belastung der einzelnen Querschnittsanteile im Zeitintervall (tj,tj+1) mit der Kriech-funktion f(tj+1,tj) berücksichtigt. Bei hinreichend kleinen Zeitschritten können die Nachteile der getroffenen Vereinfachung vernachlässigt werden. KW - Bauteil KW - Verbundbauweise KW - Tragverhalten KW - Zeitabhängigkeit KW - Laplace-Transformation Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3516 ER - TY - CHAP A1 - Müller, Jens A1 - Kirschke, Heiko A1 - Köcher, Jürgen A1 - Petter, Steffen T1 - Untersuchung und Erarbeitung eines Leitfadens zum Dokumentenmanagement in KMU des Bauwesens N2 - In der heutigen Informationsgesellschaft sind alle Geschäftsprozesse in einem Unternehmen geprägt durch die Verwendung der vorhandenen Informations- und Kommunikationstechnologien. Diese haben zur Folge, dass Unternehmen mit einer wahren Flut an Informationen konfrontiert werden, die von extern und intern in das Unternehmen eingetragen wurden. Die erfolgreiche Beherrschung dieser Informationsflut bildet die Basis für das effektive Arbeiten im Unternehmen. Grundvoraussetzung hierfür ist vor allem ein harmonisches Zusammenspiel zwischen Mensch ↔ Organisation ↔ Technik. Dokumentenmanagementsysteme haben sich zur Aufgabe gemacht, den Anwender bei der technologischen Bewältigung dieser Aufgabenstellung zu unterstützen. Der hier vorgestellte Artikel zeigt die Probleme auf, die während der Umsetzung eines Dokumentenmanagementsystems auftreten können und konzentriert sich dabei besonders auf Kleinen und Mittleren Unternehmen (KMU) im Bauwesen. Charakteristisch für diese ist die Schwäche die eigenen Unternehmensstrukturen betriebswirtschaftlich aufzubereiten, woraus später bei einer technologischen Umsetzung schwerwiegende Probleme resultieren. Genau an diesem Punkt setzt der vorgestellte Artikel an und versucht den Zusammenhang zwischen Organisation und Technik herauszuarbeiten, um darauf aufsetzend einen allgemeingültigen Ansatz für die Umsetzung eines Dokumentenmanagementsystems zu liefern. KW - Baubetrieb KW - Klein- und Mittelbetrieb KW - Dokumentenverwaltungssystem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3367 ER - TY - CHAP A1 - Paul, Norbert A1 - Pfeiffer, Daniel A1 - Mülle, Jutta T1 - Unterstützung der integrierten Gebäudeplanung und -verwaltung mit einem topologischen Kerndatenmodell N2 - An einem Teil der Topologie architektonischer Räume, dem Volumenadjazenzgraphen (VAG), wird gezeigt wie topologisches Modellieren Anwendungen der Bauplanung integrieren kann. Dazu wird ein Prototyp vorgestellt, der im wesentlichen aus drei Komponenten besteht: Mit dem Anforderungsmanager werden Anforderungen eigegeben, die formal gut handhabbar sind. Mit dem Topologiemanager werden diese Anforderungen mit gezeichneten Räumen kombiniert. Die topologischen Relationen in den Zeichnungen werden mit den entsprechenden Mitteln des GIS berechnet und in eine Datenbank exportiert. Der Anforderungsprüfer vergleicht dann die Anforderungsdaten, die mit Hilfe des Anforderungsmanagers erzeugt wurden, mit den Topologiedaten. Dieser Ansatz soll zeigen, wie topologische Modelle eine Formalisierung semantisch hochstehender Informationen ermöglichen, indem sie als Eigenschaften von Graphen dargestellt werden KW - Bauplanung KW - CAD KW - Datenmodell Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3424 ER - TY - CHAP A1 - Schallehn, W. T1 - Umweltorientiertes Projektmanagement N2 - Das studentische Projekt Umweltorientiertes Projektmanagement (UWoPM) eröffnet eine neue Generation von Arbeitsweisen im Projektmanagement. Umweltbelange wirken über Rechtsvorschriften immer stärker in das Projektgeschäft hinein. Durch Einbeziehung von rechtsrelevanten Daten in die Projektdatenbasis sowie von Rechtsbestimmungen in die Wissensbasis wird eine Softwareunterstützung für (wenn auch zunächst nur elementare) Rechtsfragen geboten. Eine spezielle Präsentation von Rechtswissen und eine komfortable Unterstützung der Antragstellung sollen dies in die Selbstverständlichkeiten des Projektmanagements einbringen. Gleichzeitig bietet der UWoPM-Prototyp zeitgemäße Systemlösungen für die Kommunikation Antragsteller - Behörde sowie für den Workflow innerhalb der Genehmigungsbehörde. Dieser Vortrag gibt Einführung und Übersicht zu insgesamt 18 Diplomarbeiten, in denen die Einzelkomponenten des UWoPM entwickelt wurden. Zentrales Problem war die Überführung gesetzlicher Vorschriften in Wissensbasen. Durch Beschränkung auf >Kernbestimmungen< und Ausweis von Interpretationsbedarf wurde ein prinzipieller Lösungsweg realisiert. Die technische Realisierung konnte zwar über einen Prototyp noch nicht hinausgehen, weist aber die Realisierbarkeit des Gesamtansatzes nach. KW - Projektmanagement KW - Umweltfaktor Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4528 ER - TY - CHAP A1 - Pabst, Hans-Friedrich T1 - Transportlogistik mit GIS im Bauwesen : Mathematische Modelle der Bauinformatik N2 - Die Lage oder der Standort eines Bauwerkes ist zweifellos charakteristisch mit diesem verbunden. Die räumliche Einordnung eines exponierten architektonischen Werkes, die Erschließung eines Gebäudes im innerstädtischen Umfeld oder die Verwaltung eines Bestands ist im Bauwesen oder der Architektur immer visuell. Die Interaktion mit Zeichnungen, die Orientierung anhand eines Lageplans oder die Dokumentation mit Fotos sind nur einige Beispiele. Die wirtschaftliche Optimierung unter Nutzung solcher Daten und deren nachfolgende Visualisierung soll hier mittels geeigneter Systeme gezeigt werden. Aber auch die Bewertung durch und Interaktion mit dem Benutzer unterstützt werden. So soll dieser Artikel beispielhaft den Transport und Verkehr fokussieren. Mathematik Graphen und Netze formen dabei Modelle zur Optimierung der zugrundeliegenden Logistikprozesse: Die Baustoffbedarfsplanung mit Bestellwesen, (Ab-)Transport und Lieferung von Material, Tourenzusammenstellung oder Standortauswahl. Informatik Weiterhin wird deren softwaretechnische Umsetzung und Einordung in begleitende Projekte der >Mathematischen Optimierung< vorgestellt. KW - Bauwesen KW - Transportproblem KW - Generelle-Interessen-Skala Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3409 ER - TY - JOUR A1 - Ganev, T. A1 - Marinov, M. T1 - Towards Optimal Designing of thin elastic Plates with a specific free Oscillations Frequency N2 - Thin elastic plates are the basic constructional elements and are very often subjected to dynamic effects especially in the machine-building structures. Their saving design of resonance conditions of operation is an extremely complicated task which cannot be solved analytically. In the present report an efficient and sufficiently general method for optimal design of thin plates is worked out on the basis of energy resonance method of Wilder, the method of the finite elements for dynamic research and the methods of parameter optimization. By means of these methods various limitations and requirements put by the designer to the plates can be taken into account. A programme module for numerical investigation of the weight variation of the plate depending on the taken variable of the designed thickness at different supporting conditions is developed. The reasons for the considerable quantity and quality difference between the obtained optimal designs are also analysed. KW - Platte KW - Optimierung KW - Freie Schwingung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5375 ER - TY - CHAP A1 - Garrett, James H. A1 - Akinci, Burcu A1 - Wang, Hongjun T1 - Towards Domain-Oriented Semi-Automated Model Matching for Supporting Data Exchange N2 - The process of matching data represented in two different data models is a longstanding issue in the exchange of data between different software systems. While the traditional manual matching approach cannot meet today’s demands on data exchange, research shows that a fully automated generic approach for model matching is not likely, and generic semi-automated approaches are not easy to implement. In this paper, we present an approach that focuses on matching data models in a specific domain. The approach combines a basic model matching approach and a version matching approach to deduce new matching rules to enable data transfer between two evolving data models. KW - Bauwerk KW - Datenmanagement KW - Datenaustausch Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1324 ER - TY - CHAP A1 - Boukamp, Frank A1 - Akinci, Burcu T1 - Towards Automated Defect Detection: Object-oriented Modeling of Construction Specifications N2 - This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system. KW - Bauwerk KW - Datenmanagement KW - Modellierung KW - Norm Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1315 ER - TY - JOUR A1 - Aziz, Zeeshan A1 - Anumba, Chimay A1 - Miles, John T1 - Towards a Semantic Grid Computing Platform for Disaster Management in Built Environment N2 - Current disaster management procedures rely primarily on heuristics which result in their strategies being very cautious and sub-optimum in terms of saving life, minimising damage and returning the building to its normal function. Also effective disaster management demands decentralized, dynamic, flexible, short term and across domain resource sharing, which is not well supported by existing distributing computing infrastructres. The paper proposes a conceptual framework for emergency management in the built environment, using Semantic Grid as an integrating platform for different technologies. The framework supports a distributed network of specialists in built environment, including structural engineers, building technologists, decision analysts etc. It brings together the necessary technology threads, including the Semantic Web (to provide a framework for shared definitions of terms, resources and relationships), Web Services (to provide dynamic discovery and integration) and Grid Computing (for enhanced computational power, high speed access, collaboration and security control) to support rapid formation of virtual teams for disaster management. The proposed framework also make an extensive use of modelling and simulation (both numerical and using visualisations), data mining (to find resources in legacy data sets) and visualisation. It also include a variety of hardware instruments with access to real time data. Furthermore the whole framework is centred on collaborative working by the virtual team. Although focus of this paper is on disaster management, many aspects of the discussed Grid and Visualisation technologies will be useful for any other forms of collaboration. Conclusions are drawn about the possible future impact on the built environment. KW - Mehragentensystem KW - Lernendes System KW - Katastrophenmanagement KW - Software Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2084 ER - TY - CHAP A1 - Paul, Norbert A1 - Bradley, Patrick Erik T1 - Toplogical Houses N2 - Many properties of houses are of topological nature. The problem of three-dimensional encoding is solved here by first giving an axiomatic description of a simplified concept of >house< as a certain generalisation of a cw-complex and, secondly, by generalising local observation structures of embedded unconnected planar graphs to the three-dimensional case and proving that they allow retrieving all topological properties of these simplified houses. In the more general case of an architectural complex (a certain generalisation of a >house<) still much topolgical information is kept in these structures still making them a useful approach to encoding topological spaces. Finally, a lossless representation of observation structures in a relational database scheme which we call PLAV (Points, Lines, Areas, Volumes) is given. We expect PLAV to be useful for encoding higher dimensional (architectural) space-time complexes. KW - Dreidimensionales Modell KW - Software Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3410 ER - TY - CHAP A1 - Bernstein, Swanhild A1 - Richter, Matthias T1 - The Use of Genetic Algorithms in Finite Element Model Identification N2 - A realistic and reliable model is an important precondition for the simulation of revitalization tasks and the estimation of system properties of existing buildings. Thereby, the main focus lies on the parameter identification, the optimization strategies and the preparation of experiments. As usual structures are modeled by the finite element method. This as well as other techniques are based on idealizations and empiric material properties. Within one theory the parameters of the model should be approximated by gradually performed experiments and their analysis. This approximation method is performed by solving an optimization problem, which is usually non-convex, of high dimension and possesses a non-differentiable objective function. Therefore we use an optimization procedure based on genetic algorithms which was implemented by using the program package SLang... KW - Finite-Elemente-Methode KW - Genetischer Algorithmus Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2769 ER - TY - CHAP A1 - Wainaina, Simon A1 - Richter, Matthias A1 - Kirchheim, Alfred T1 - The Use of Activity Chain Models to Analyse Stochastic Travel Demand N2 - For analysis and planing of transport networks detailed information concerning travel sequences is required. The paper examines an activity chain model to determine stochastic travel demand which individual generates in order to participate in activity or sequence of activities over the day. The transition from one activity to another depends on the activity participation decision, which is made sequentially and is constrained in space and time. Activity chains derived from travel survey data are used as a base to develop a more realistic model than conventional discrete trip models. Probabilistic concepts and statistical procedures are used to estimate characteristics of travel demand such as the number of daily out-of-home activities and transition probability from one activity to another participated by homogeneous behavioural groups. In addition, the paper compares the model for two different sized towns. KW - Verkehr KW - Bedarfsermittlung KW - Markoffsche Kette Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6157 ER - TY - CHAP A1 - Hommel, Angela T1 - The Theory of Difference Potentials in the Three-Dimensional Case N2 - The method of difference potentials can be used to solve discrete elliptic boundary value problems, where all derivatives are approximated by finite differences. Considering the classical potential theory, an integral equation on the boundary will be investigated, which is solved approximately by the help of a quadrature formula. The advantage of the discrete method consists in the establishment of a linear equation system on the boundary, which can be immediately solved on the computer. The described method of difference potentials is based on the discrete Laplace equation in the three-dimensional case. In the first step the integral representation of the discrete fundamental solution is presented and the convergence behaviour with respect to the continuous fundamental solution is discussed. Because the method can be used to solve boundary value problems in interior as well as in exterior domains, it is necessary to explain some geometrical aspects in relation with the discrete domain and the double-layer boundary. A discrete analogue of the integral representation for functions in will be presented. The main result consists in splitting the difference potential on the boundary into a discrete single- and double-layer potential, respectively. The discrete potentials are used to establish and solve a linear equation system on the boundary. The actual form of this equation systems and the conditions for solvability are presented for Dirichlet and Neumann problems in interior as well as in exterior domains KW - Randelemente-Methode KW - Diskrete Fourier-Transformation Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5956 ER - TY - CHAP A1 - Ward, Michael A1 - Thorpe, Tony A1 - Price, Andrew T1 - The Re-use of Site Data to Inform Business Processes N2 - The increased implementation of site data capture technologies invariably results in an increase in data warehousing and database technologies to store captured data. However, restricted use of data beyond the initial application could potentially result in a loss of understanding of site processes. This could in turn lead to poor decision making at production, tactical and strategic levels. Concrete usage data have been collected from two piling processes. These data have been analysed and the results highlighted potential improvements that could be made to existing site management and estimating processes. A cost benefit analysis has been used to support decision making at the strategic level where the identified improvements require capital expenditure. KW - Bauwerk KW - Datenmanagement KW - Baustelle KW - Controlling Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1308 ER - TY - CHAP A1 - Reinhardt, Jan A1 - Garrett, James H. A1 - Scherer, Raimar J. T1 - The preliminary design of a wearable computer for supporting Construction Progress Monitoring N2 - Progress monitoring has become more and more important as owners have increasingly demanded shorter times for the delivery of their projects. This trend is even more evident in high technology industries, such as the computer industry and the chemical industry. Fast changing markets, such as the computer industry, force companies to have to build new facilities quickly. To make a statement about construction progress, the status of a building has to be determined and monitored over a period of time. Depicting the construction progress in a diagram over time, statements can be made about the anticipated completion of the project and delays and problems in certain areas. Having this information, measures can be taken to efficiently >catch up< on the schedule of the project. New technologies, such as wearable computers, speech recognition, touch screens and wireless networks could help to move electronic data processing to the construction site. Progress monitoring could very much take advantage of this move, as several intermediate steps of processing progress data can be made unnecessary. The processing of progress data could be entirely done by computers, which means that data for supporting decisions can be made available at the moment the construction progress is measured. This paper describes a project, that investigates how these new technologies can be linked to create a system that enhances the efficiency of progress monitoring. During the project a first prototype of a progress monitoring system was developed that allows construction companies and site supervisors to measure construction progress on site using wearable computers that are speech controlled and connected to a central database via a wireless network. KW - Bauablauf KW - Überwachung KW - Transportables Gerät Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5901 ER - TY - JOUR A1 - Minch, M. J. A1 - Trochanowski, A. T1 - The numerical Modelling and Analysis of RC cracked Structures N2 - The purpose of this paper is to review model for finite element techniques for non-linear crack analysis of reinforced concrete beams and slabs. The non-linear behaviour of concrete and steel were described. Some calculations of >self-stress< for concrete and reinforced concrete beam was made. Current computational aspects are discussed. Several remarks for future studies are also given. The numerical model of the concrete and reinforced concrete was described. The paper shows the results of calculations on a reinforced concrete plane stress panel with cracks. The non-linear, numerical model of calculations of reinforced concrete was assumed. Using finite elements method some calculations were made. The results of calculations like displacements, stresses and cracking are shown on diagrams. They were compared with experimental results and other finding. Some conclusions about the described model and results of calculation are shown. KW - Tragwerk KW - Stahlbeton KW - Rissbildung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5278 ER - TY - JOUR A1 - Tolok, V. A. A1 - Tolok, A. V. A1 - Gomenyuk, S. I. T1 - The instrumental System of Mechanics Problems Analysis of the deformed Solid Body N2 - In the abstract proposed is the Instrumental System of mechanics problems analysis of the deformed solid body. It supplies the researcher with the possibility to describe the input data on the object under analyses and the problem scheme based upon the variational principles within one task. The particular feature of System is possibility to describe the information concerning the object of any geometrical shape and the computation sheme according to the program defined for purpose. The Methods allow to compute the tasks with indefinite functional and indefinite geometry of the object (or the set of objects). The System provides the possibility to compute the tasks with indefinite sheme based upon the Finite Element Method (FEM). The restrictions of the System usage are therefore determined by the restrictions of the FEM itself. It contrast to other known programms using FEM (ANSYS, LS-DYNA and etc) described system possesses more universality in defining input data and choosing computational scheme. Builtin is an original Subsytem of Numerical Result Analuses. It possesses the possibility to visualise all numerical results, build the epures of the unknown variables, etc. The Subsystem is approved while solving two- and three-dimensional problems of Elasticiti and Plasticity, under the conditions of Geometrical Unlinearity. Discused are Contact Problems of Statics and Dynamics. KW - Festkörpermechanik KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5361 ER - TY - CHAP A1 - Brackx, Fred A1 - De Schepper, Nele A1 - Sommen, Frank T1 - The Hermite Transformation in Quaternionic Analysis N2 - The conventional way of describing an image is in terms of its canonical pixel-based representation. Other image description techniques are based on image transformations. Such an image transformation converts a canonical image representation into a representation in which specific properties of an image are described more explicitly. In most transformations, images are locally approximated within a window by a linear combination of a number of a priori selected patterns. The coefficients of such a decomposition then provide the desired image representation. The Hermite transform is an image transformation technique introduced by Martens. It uses overlapping Gaussian windows and projects images locally onto a basis of orthogonal polynomials. As the analysis filters needed for the Hermite transform are derivatives of Gaussians, Hermite analysis is in close agreement with the information analysis carried out by the human visual system. In this paper we construct a new higher dimensional Hermite transform within the framework of Quaternionic Analysis. The building blocks for this construction are the Clifford-Hermite polynomials rewritten in terms of Quaternionic analysis. Furthermore, we compare this newly introduced Hermite transform with the Quaternionic-Hermite Continuous Wavelet transform. The Continuous Wavelet transform is a signal analysis technique suitable for non-stationary, inhomogeneous signals for which Fourier analysis is inadequate. Finally the developed three dimensional filter functions of the Quaternionic-Hermite transform are tested with traditional scalar benchmark signals upon their selectivity at detecting pointwise singularities. KW - Quaternion KW - Hermitesche Entwicklung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2817 ER - TY - JOUR A1 - Kazakevitch, M. I. A1 - Volkova, Viktorija T1 - The exact Solution of the free pre-stressed Bar-Oscillations N2 - In this paper the results of the investigations of the free oscillations of the pre-stressed flexible structure elements are presented . Two cases of the central preliminary stress are investigated : without intermediate fastening of the tie to the flexible element and with the intermediate fastening in the middle of the element length. The given physical model can be applied to the flexible sloping shells and arches, membranes, large space antenna fields (besides flexible elements). The peculiarity of these systems is the possibility of the non-adjacent equilibrium form existence at the definite relations of the physical parameters . The transition from one stable equilibrium form to another, non-adjacent form, may be treated as jump. In this case they are called systems with buckling or the systems with two potential «gaps». These systems commenced the new section of the mathematical physics - the theory of chaos and strange attractors. The analysis of the solutions confirms the received for the first time by the author and given in effect of the oscillation period doubling of the system during the transition from the «small» oscillations relatively center to the >large< relatively all three equilibrium conditions. The character of the frequency (period) dependence on the free oscillation amplitudes of the non-linear system also confirms the received earlier result of the duality of the system behaviour : >small< oscillations possess the qualities of soft system; >large< oscillations possess the qualities of rigid system. The >small< oscillation natural frequency changing, depending on the oscillation amplitudes, is in the internal . Here the frequency takes zero value at the amplitude values Aa and Ad (or Aa and Ae ); the frequency takes maximum value at the amplitude value near point b .The >large< oscillation natural frequency changes in the interval . Here is also observed . The influence of the tie intermediate fastening doesn't introduce qualitative changes in the behaviour of the investigated system. It only increases ( four times ) the critical value of the preliminary tension force KW - Bauteil KW - Vorspannung KW - Freie Schwingung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5356 ER - TY - JOUR A1 - Strukelj, A. A1 - Skrinar, Matjaz T1 - The Evaluation of the Dynamical Soil-Bridge Interaction N2 - In the design of a structure, the implementation of reliable soil-foundation-structure interaction into the analysis process plays a very important role. The paper presents a determination of parameters of a suitably chosen soil-foundation model and their influence on the structure response. Since the mechanical data for the structure can be determined with satisfactory accuracy, the properties of the soil-foundation model were identified using measured dynamic response of the real structure. A simple model describing soil-foundation structure was incorporated into the classical 3-D finite element analysis of the structure with commercial software. Results obtained from the measured data on the pier were afterwards compared with those obtained with the finite model of the pier-foundation-soil structure. On the basis of this comparison the coefficients describing the properties in the soil-foundation model were adjusted until the calculated dynamic response coincided with the measured ones. In this way, the difference between both results was reduced to 1%. Full-scale tests measuring eigenmotion of the bridge were performed through all erection stages of the new bridge in Maribor. In this way an effective and experimentally verified 3-D model for a complex dynamic analysis of the bridge under the earthquake loading was obtained. The significant advantage of the obtained model is that it was updated on the basis of the dynamic measurements thus improving the model on the basis of in-situ geomechanical measurements. The model is very accurate in describing the upper structure and economical in describing the soil mass thus representing an optimal solution regarding computational efforts. KW - Boden-Bauwerk-Wechselwirkung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5397 ER - TY - JOUR A1 - Kazakevitch, M. I. A1 - Kulyabko, V. V. A1 - Dubichvost, A. A. T1 - The discrete dynamic Models of the Interaction of complex - composite Structures with the dynamic Loads N2 - In the given paper the generalized formulation of the problem of computer modelling of the complex-composite structure interaction with different types of dynamic loads and effects is discussed. Here the analysis is given as for the usage of some universal computing systems for the solution of such problems. Also if is shown that the quantification of the dynamic models of the complex-composite systems with the variable structure, depending on the character and intensivity of the effects, is necessary. The different variants of the joint and the space structure element modelling are gested. It allows to consider the complex modes of the joint bending-torsional oscillations of such structures as bridges, towers, high-rise buildings. The peculiarities of the modelling and testing of some problems of the objects aerodynamics and the interaction of the frameworks constructions with shock and movable loads are considered. In this paper the examples of the complex-composite structure dynamic analysis are shown. It is achieved by means of some special methods of the input of the real inducements and loads of the exploitated analog-object into the computing model. The suggested models found a wide use both at the design of new structures and the dynamic monitoring of the exploitated structures. KW - Verbundtragwerk KW - Dynamische Belastung KW - Wechselwirkung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5219 ER - TY - CHAP A1 - Petzold, Frank A1 - Donath, Dirk T1 - The building as a container of information : the starting point for project development and design formulation N2 - For planning in existing built contexts, the building survey is the starting point for initial planning proposals, for the diagnosis and documentation of building damages, for the creation of objectives catalogues, for the detailed design of renovation and conversion measures and for ensuring fulfilment of building legislation, particularly by change of use and refitting. An examination of currently available IT-tools shows insufficient support for planning within existing contexts, most notably a deficit with regard to information capture and administration. This paper discusses the concept for a modular surveying system (basic concept, separation of geometry from semantic data, and separation into sub-systems) and the prototypical realisation of a system for the complete support of the entire building surveying process for existing buildings. The project aims to contribute to the development of a planning system for existing buildings. ... KW - Architektur KW - Verteiltes System KW - Lebenszyklus KW - Bauwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1848 ER - TY - JOUR A1 - Volkova, Viktorija T1 - The analysis of dynamic behaviour of pre-stressed systems under polyharmonic excitations N2 - Pre-stressed structural elements are widely used in large-span structures. As a rule, they have higher stiffness characteristics. Pre-stressed rods can be applied as girders of different purpose, and as their separate parts, e.g. rods of trusses and frames. Among numerous ways of prestressing the compression of girders, trusses, and frames by tightenings from high-strength materials is under common application. KW - Verkehrsplanung KW - Simulation KW - Baukonstruktion KW - Dynamische Belastung KW - Tragwerk / Vorspannung KW - Vorgespannte Konstruktion Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2656 ER - TY - CHAP A1 - Konrad, Martin A1 - Chudoba, Rostislav A1 - Butenweg, Christoph T1 - Textile Reinforced Concrete Part II: Multi-Level Modeling Concept N2 - The development of a consistent material model for textile reinforced concrete requires the formulation and calibration of several sub-models on different resolution scales. Each of these models represents the material structure at the corresponding scale. While the models at the micro-level are able to capture the fundamental failure and damage mechanisms of the material components (e.g. filament rupture and debonding from the matrix) their computational costs limit their application to the small size representative unit cells of the material structure. On the other hand, the macro-level models provide a sufficient performance at the expense of limited range of applicability. Due to the complex structuring of the textile reinforced concrete at several levels (filament - yarn - textile - matrix) it is a non-trivial task to develop a multiscale model from scratch. It is rather more effective to develop a set of conceptually related sub-models for each structural level covering the selected phenomena of the material behavior. The homogenized effective material properties obtained at the lower level may be verified and validated using experiments and models at the higher level(s). In this paper the development of a consistent material model for textile reinforced concrete is presented. Load carrying and failure mechanisms at the micro, meso and macro scales are described and models with the focus on the specified scales are introduced. The models currently being developed in the framework of the collaborative research center are classified and evaluated with respect to the failure mechanisms being captured. The micromechanical modeling of the yarn and bonding behavior is discussed in detail and the correspondence with the experiments focused on the selected failure and interaction mechanisms is shown. The example of modeling the bond layer demonstrates the application of the presented strategy. KW - Beton KW - Bewehrung KW - Textilfaser KW - Mathematisches Modell Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3230 ER - TY - CHAP A1 - Chudoba, Rostislav A1 - Butenweg, Christoph A1 - Pfeiffer, Frank T1 - Textile Reinforced Concrete Part I: Process Model for Collaborative Research and Development N2 - The goal of the collaborative research center (SFB 532) >Textile reinforced concrete (TRC): the basis for the development of a new material technology< installed in 1998 at the Aachen University is a complex assessment of mechanical, chemical, economical and productional aspects in an interdisciplinary environment. The research project involves 10 institutes performing parallel research in 17 projects. The coordination of such a research process requires effective software support for information sharing in form of data exchange, data analysis and data archival. Furthermore, the processes of experiment planning and design, modification of material compositions and design parameters and development of new material models in such an environment call for systematic coordination applying the concepts of operational research. Flexible organization of the data coming from several sources is a crucial premise for a transparent accumulation of knowledge and, thus, for a successful research in a long run. The technical information system (TRC-TIS) developed in the SFB 532 has been implemented as a database-powered web server with a transparent definition of the product and process model. It serves as an intranet server with access domains devoted to the involved research groups. At the same time, it allows the presentation of selected results just by granting a data object an access from the public area of the server via internet. KW - Beton KW - Bewehrung KW - Textilfaser KW - Datenbank Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2866 ER - TY - CHAP A1 - Hauschild, Thomas A1 - Hübler, Reinhard T1 - Techniken der Verwaltung dynamischer digitaler Bauwerksmodelle für Revitalisierungsvorhaben N2 - Modellverwaltungssysteme sind eine geeignete technologische Basis zum Management digitaler Bauwerksmodelle bei Planungstätigkeiten für den Neubau als auch für die Revitalisierung von Bauwerken. Die Unterstützung von Revitalisierungsprozessen impliziert für den Entwurf integrierter Planungsumgebungen spezifische Anforderungen wie die Repräsentation von Informationen, die mit verschiedenen Typen von Vagheit behaftet sind, die Notwendigkeit, den Soll- sowie den Ist- Zustand des Bauwerks abzubilden und die Fähigkeit des Umgangs mit temporal inkonsistenten Modellzuständen. Die erforderliche Dynamik der Domänenmodelle und die erforderliche Nutzbarkeit in Virtual Enterprises stellen weitere Ansprüche an die Realisierungsbasis der Modellverwaltungssysteme. Zur Implementierung derartiger Systeme erweist es sich als vorteilhaft, Eigenschaften objektorientierter Programmiersprachen mit nichtstatischen Typsystemen auszunutzen, da diese durch die vorhandene Metaebene sowie Introspektions- und Reflektionsmechanismen eine effiziente Realisierungsbasis bereitstellen. Zur effektiven Unterstützung synchroner kooperativer Planungstätigkeiten innerhalb einzelner Fachdisziplinen wurde ein Benachrichtigungsmechanismus realisiert, der an das Modellverwaltungssystem angekoppelte Fachapplikationen über nebenläufig vorgenommene Modifikationen am zugehörigen Domänenmodell oder an Projektinformationen informiert. Weiterhin existiert ein Mechanismus zur vereinfachten Anbindung von existierenden Applikationen, die auf statischen Partialmodellen beruhen oder standardisierte, modellbasierte Austauschformate unterstützen. Abschließend wird eine aus einem zentralen Projektserver, Domänenservern und Domänenclients bestehende hybride Systemarchitektur vorgestellt, die geeignet ist, unter den Randbedingungen kooperativer und geographisch verteilter Arbeit bei Revitalisierungsvorhaben in Virtual Enterprises eingesetzt zu werden. KW - Bauwerk KW - Datenmodell KW - Datenverwaltung KW - Digitales Modell Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3054 ER - TY - THES A1 - Beer, Daniel G. T1 - Systementwurf für verteilte Applikationen und Modelle im Bauplanungsprozess T1 - System design for distributed applications and models in the planning process N2 - Der Planungsprozess im Konstruktiven Ingenieurbau ist gekennzeichnet durch drei sich zyklisch wiederholende Phasen: die Phase der Aufgabenverteilung, die Phase der parallelen Bearbeitung mit entsprechenden Abstimmungen und die Phase der Zusammenführung der Ergebnisse. Die verfügbare Planungssoftware unterstützt überwiegend nur die Bearbeitung in der zweiten Phase und den Austausch der Datenbestände durch Dokumente. Gegenstand der Arbeit ist die Entwicklung einer Systemarchitektur, die in ihrem Grundsatz alle Phasen der verteilten Bearbeitung und unterschiedliche Arten der Kooperation (asynchron, parallel, wechselseitig) berücksichtigt und bestehende Anwendungen integriert. Das gemeinsame Arbeitsmaterial der Beteiligten wird nicht als Dokumentmenge, sondern als Menge von Objekt- und Elementversionen und deren Beziehungen abstrahiert. Elemente erweitern Objekte um applikationsunabhängige Eigenschaften (Features). Für die Bearbeitung einer Aufgabe werden Teilmengen auf Basis der Features gebildet, für deren Elemente neue Versionen abgeleitet und in einen privaten Arbeitsbereich geladen werden. Die Bearbeitung wird auf Operationen zurückgeführt, mit denen das gemeinsame Arbeitsmaterial konsistent zu halten ist. Die Systemarchitektur wird formal mit Mitteln der Mathematik beschrieben, verfügbare Technologie beschrieben und deren Einsatz in einem Umsetzungskonzept dargestellt. Das Umsetzungskonzept wird pilothaft implementiert. Dies erfolgt in der Umgebung des Internet in der Sprache Java unter Verwendung eines Versionsverwaltungswerkzeuges und relationalen Datenbanken. N2 - The planning process in structural engineering can be characterized by three iterative phases: the phase of distribution of tasks, the phase of parallel working with cooperation among the planners and the phase of merging the results. Available planning software does only support the second phase and the exchange of data via documents. The objective of this thesis is the development of a software architecture that supports the three phases and all types of cooperation (asynchronous, parallel and reciprocal) in principle and integrates existing engineering applications. The common planning material is abstracted as a set of object versions, element versions and their relationships. Elements extend objects with application independent properties, called features. Subsets on the base of features are calculated for the execution of tasks. Therefore new versions of elements and objects are derived and copied into the planners’s private workspace. Already stored versions remain unchanged and can be referred to. Modifications base on operations that ensure the consistency of the versioned model. The system architecture is formally described with mathematical methods. Available information technology is analyzed and used for an implementation concept. The implementation concept is proven by a pilot applicable in the Internet. The implementation is based on the programming language Java, a version control system and a relational database. KW - Planungsprozess KW - Kooperation KW - Versionsverwaltung KW - Objektorientierung KW - Verteilte Anwendungen KW - Verteilte Modelle KW - cooperation KW - distributed applications KW - distributed models KW - versioning Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060418-7892 N1 - Shaker Verlag, ISBN 3-8322-5060-3 ER - TY - CHAP A1 - Ameziane, Farid A1 - Lasserre, Stephane T1 - SYSBAT - An Application to the Building ProductionBased on Computer Supported Cooperative Work N2 - Our proposed solution is to enable partners of a construction project to share all the technical data produced and handled during the building production process by building a system through the use of internet technology. The system links distributed databases and allows building partners to access remotely and manipulate specific information. It provides an updated building representation that is being enriched and refined all along the building production process. A recent collaboration with Nemetschek France (subsidiary company of Nemetschek AG, AEC CAD software leader) focus on a building product repository available in a web context. The aim is to help building project actors to choose a technical solution that fits its professional needs, and maintain our information system with up to date information. It starts with the possibility to build on line building product catalogs, in order to link Allplan CAD entities with building technical features. This paper presents the conceptual approaches on which our information system is built. Starting from a general organization diagram organization, we focus on the product and the description branches of construction works (including last IFC model specifications). Our aim is to add decisional support to the construction works selection process. To do so, we consider the actor's role upon the system and the pieces of information each one needs to achieve a given task. KW - Bauplanung KW - Bauausführung KW - Computerunterstütztes Verfahren Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2748 ER - TY - CHAP A1 - Vasilkov, Dmitry M. T1 - Surface design based upon a combined mesh N2 - The subject of this talk is the problem of surface design based upon a mesh that may contain both triangular and quadrangular domains. We investigate the cases when such a combined mesh occurs more preferable for bivariate data interpolation than a pure triangulation. First we describe a modification of the well-known flipping algorithm that constructs a locally optimal combined mesh with a predefined quality criterion. Then we introduce two quality measures for triangular and quadrangular domains and present the results of a computational experiment that compares integral interpolation errors and errors in gradients caused by the piecewise surface models produced by the flipping algorithm with the introduced quality measures. The experiment shows that triangular meshes with the Delaunay quality measure provide better interpolation accuracy only if the interpolated function is strictly convex, as well as a saddle-shaped function is better interpolated by bilinear patches within a combined mesh. For a randomly shaped function combined meshes demonstrate smaller error values and better stability in compare with pure triangulations. At the end we consider other resources for mesh improvement, such as excluding >bad< points from the input set for the mesh generating procedure. Because the function values at these points should not be lost, some linear or bilinear patches are replaced by nonlinear patches that pass through the excluded points. KW - Oberfläche KW - Modellierung KW - Dreieck KW - Viereck Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3671 ER - TY - CHAP A1 - Bürgy, Christian A1 - Garrett, James H. T1 - Supporting Domain Experts in Determining Viable User Interface Designs for Wearable Computers Used in AEC Work Situations N2 - The design of mobile IT systems, especially the design of wearable computer systems, is a complex task that requires computer science knowledge, such as that related to hardware configuration and software development, in addition to knowledge of the domain in which the system is intended to be used. Particularly in the AEC sector, it is necessary that the support from mobile information technology fit the work situation at hand. Ideally, the domain expert alone can adjust the wearable computer system to achieve this fit without having to consult IT experts. In this paper, we describe a model that helps in transferring existing design knowledge from non-AEC domains to new projects in the construction area. The base for this is a model and a methodology that describes the usage scenarios of said computer systems in an application-neutral and domain-independent way. Thus, the actual design information and experience will be transferable between different applications and domains. KW - Mobile Computing KW - Funknetz KW - Benutzeroberfläche KW - Mensch-Maschine-Kommunikation Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1168 ER - TY - CHAP A1 - Alda, Sascha A1 - Cremers, Armin B. A1 - Bilek, Jochen T1 - Support of Collaborative Structural Design Processes through the Integration of Peer-to-Peer and Multiagent Architectures N2 - Structural engineering projects are increasingly organized in networked cooperations due to a permanently enlarged competition pressure and a high degree of complexity while performing the concurrent design activities. Software that intends to support such collaborative structural design processes implicates enormous requirements. In the course of our common research work, we analyzed the pros and cons of the application of both the peer-to-peer (University of Bonn) and multiagent architecture style (University of Bochum) within the field of collaborative structural design. In this paper, we join the benefits of both architecture styles in an integrated conceptual approach. We demonstrate the surplus value of the integrated multiagent–peer-to-peer approach by means of an example scenario in which several structural engineers are co-operatively designing the basic structural elements of an arched bridge, applying heterogeneous CAD systems. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Mehragentensystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1481 ER - TY - CHAP A1 - Abramian, A. K. T1 - Superelliptic Shells as new constructive Forms N2 - In the superelliptic shell joined to a circular cylinder bending stresses are absent when it is subjected to uniform pressure.Some geometrical characteristics have been found. Expressions for determining stresses in the shell crest(in the singular point of plane type) are suggested. The problem of a theoretical critical buckling load of an elongated shell supported by frames is studied. A critical buckling load for two shells with different specifications was found experimentally. KW - Schale KW - Ellipsoid KW - Beulung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4347 ER - TY - JOUR A1 - Ke, Chen A1 - Jian Ming, Lu T1 - Study of Analysis System for Bridge Test N2 - Analysis System for Bridge Test (Chinese name abbr.: QLJC) is an application software specially designed for bridge test to analyze the static and dynamic character of bridge structures, calculate efficiency ratio of load test, pick up the results of observation points and so on. In this paper, research content, system design, calculation theory, characteristics and practical application of QLJC is introduced in detail. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Brückenbau KW - Straßenbrücke Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2547 ER - TY - THES A1 - Coulon, Carl-Helmut T1 - Strukurorientiertes Fallbasiertes Schließen T1 - Structure oriented case based reasoning N2 - Das Ziel dieser Arbeit war es, durch Verwendung geeigneter vorhandener CAD-Pläne die Bearbeitung neuer CAD-Pläne zu unterstützen. Entstanden ist ein generischer Ansatz zum fallbasierten Schließens. Da in CAD-Plänen die räumliche Struktur eine wichtige Rolle spielt, ist das Konzept auf strukturorientierte Anwendungen ausgerichtet. Deshalb bezeichne ich es als ein Konzept zum " strukturorientierten fallbasierten Schließen". Die Arbeit spezifiziert das Minimum an Wissen, welches zur Suche und Wiederverwendung von Fällen benötigt wird, wie das darüber hinausgehende Wissen verarbeitet wird, welche Zusammenhänge es zum Beispiel zwischen Vergleichs- und Anpassungswissen gibt und wie man das Wissen modellieren kann. Zur Erläuterung wird das benötigte Wissen anhand verschiedener Anwendungen dargestellt. Das in der Arbeit vorgestellte Konzept erlaubt die Ergänzung, Detaillierung und Korrektur einer Anfrage. Die beiden entscheidenden Algorithmen dienen dem Vergleich von Anfrage und Fall und der Anpassung der Information des Falles zur Modifikation der Anfrage. N2 - The task of this thesis was the computer supported reuse of known CAD-designs in order to create new CAD-designs. The developed solution contains a generic approach to case based reasoning. Due to the relevance of spatial structures in CAD-designs the approach focusses on structure oriented applications. Therefore it is called an approach for „structure oriented case based reasoning". This thesis specifies the kind of the minimum knowledge required for retrieval and reuse of cases, how to integrate additional knowledge, relations between knowledge needed for comparision and adaption and how to model the knowledge. For illustration the required knowledge is described for different applications. The developed concept allows to extend, detail and correct a given query. The two most important algorithms are used to compare cases and query and to reuse the information found in a case to modify a query. KW - Fallbasiertes Schließen KW - Bauplanung KW - CAD KW - Problemlösen KW - Wissensmodellierung KW - Strukturvergleich KW - Anpassung KW - Knowledge modelling KW - comparison of structure KW - adaption Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040212-265 ER - TY - CHAP A1 - Xie, Haiyan A1 - Issa, Raja A1 - O'Brien, William T1 - Structure of a Formal User Model for Construction Information Retrieval N2 - Information science researchers and developers have spent many years addressing the problem of retrieving the exact information needed and using it for analysis purposes. In informationseeking dialogues, the user, i.e. construction project manager or supplier, often asks questions about specific aspects of the tasks they want to perform. But most of the time it is difficult for the software systems to unambiguously understand their overall intentions. The existence of information tunnels (Tannenbaum 2002) aggravates this phenomenon. This study includes a detailed case study of the material management process in the construction industry. Based on this case study, the structure of a formal user model for information retrieval in construction management is proposed. This prototype user model will be incorporated into the system design for construction information management and retrieval. This information retrieval system is a user-centered product based on the development of a user configurable visitor mechanism for managing and retrieving project information without worrying too much about the underlying data structure of the database system. An executable UML model combined with OODB is used to reduce the ambiguity in the user's intentions and to achieve user satisfaction. KW - Bauwerk KW - Datenmanagement KW - Benutzeroberfläche Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1296 ER - TY - CHAP A1 - König, Markus A1 - Klinger, Axel A1 - Berkhahn, Volker T1 - Structural Correctness of Planning Processes in Building Engineering N2 - The planning of projects in building engineering is a complex process which is characterized by a dynamical composition and many modifications during the definition and execution time of processes. For a computer-aided and network-based cooperation a formal description of the planning process is necessary. In the research project “Relational Process Modelling in Cooperative Building Planning” a process model is described by three parts: an organizational structure with participants, a building structure with states and a process structure with activities. This research project is part of the priority program 1103 “Network-Based Cooperative Planning Processes in Structural Engineering” promoted by the German Research Foundation (DFG). Planning processes in civil engineering can be described by workflow graphs. The process structure describes the logical planning process and can be formally defined by a bipartite graph. This structure consists of activities, transitions and relationships between activities and transitions. In order to minimize errors at execution time of a planning process a consistent and structurally correct process model must be guaranteed. This contribution considers the concept and the algorithms for checking the consistency and the correctness of the process structure. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Planungsprozess KW - Konsistenz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1690 ER - TY - CHAP A1 - Perevalova, Julia A1 - Pahl, Peter Jan T1 - Structural and Functional Dependence of Objects in Data Bases N2 - Let the information of a civil engineering application be decomposed into objects of a given set of classes. Then the set of objects forms the data base of the application. The objects contain attributes and methods. Properties of the objects are stored in the attributes. Algorithms which the objects perform are implemented in the methods of the objects. If objects are modified by a user, the consistency of data in the base is destroyed. The data base must be modified in an update to restore its consistency. The sequence of the update operations is not arbitrary, but is governed by dependence between the objects. The situation can be described mathematically with graph theory. The available algorithms for the determination of the update sequence are not suitable when the data base is large. A new update algorithm for large data bases has been developed and is presented in this paper. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Objektorientierung KW - Datenbank Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1683 ER - TY - JOUR A1 - Fink, Thomas T1 - Structural analysis, design and detailing using standard CAD software and standard building information model N2 - This paper describes the concept of a german commercial software package developed for the needs of structural engineers. Using a standard CAD software as user interface for all geometrical data and to save all important input data, there is a natural link to upcoming building information models. KW - Bauindustrie KW - CAD KW - Bauwerk KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2702 ER - TY - JOUR A1 - Romberg, Richard A1 - Niggl, Andreas A1 - van Treeck, Christoph T1 - Structural Analysis based on the Product Model Standard IFC N2 - In this paper we present a computer aided method supporting co-operation between different project partners, such as architects and engineers, on the basis of strictly three-dimensional models. The center of our software architecture is a product model, described by the Industry Foundation Classes (IFC) of the International Alliance for Interoperability (IAI). From this a geometrical model is extracted and automatically transferred to a computational model serving as a basis for various simulation tasks. In this paper the focus is set on the advantage of the fully three-dimensional structural analysis performed by p-version of the finite element analysis. Other simulation methods are discussed in a separate contribution of this Volume (Treeck 2004). The validity of this approach will be shown in a complex example. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Statik KW - Standard Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2433 ER - TY - JOUR A1 - Girlich, E. A1 - Kovalev, M. A1 - Zaporozhets, A. T1 - Standardization problem: Ressource Allocation in a Network N2 - We consider the standardization problem (SP) which can be formulated as follows. It is known demand bi in each type i in {1, 2, ..., n} of items. Production of yi items of the ith type brings a profit fi (yi), where fi is a nondecreasing concave function for each i in {1, 2, ..., n}.It is necessary to satisfy the demand and to maximize the total profit provided that there exist >standardization possibilities< . These possibilities means that some types of items can be replaced by some another types. We introduce generalized standardization problem (GSP) in which titems demand is given as the set of admissible demand vectors. We show that GSP and SP are special cases of the resource allocation problem over a network polymatroid. Ibasing on this observation we propose a polynomial time solution algorithm for GSP and SP. KW - Ressourcenallokation KW - Standardisierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5172 ER - TY - JOUR A1 - Schneider, Ulrich A1 - Beucke, Karl T1 - Standardisierung der Kommunikation als Integrationsansatz für das Bauwesen N2 - Eine der wichtigsten Aufgaben und Herausforderungen der Bauinformatik ist gegenwärtig die Realisierung des durchgängigen, fachübergreifenden Datenflusses im Planungsprozeß eines Bauvorhabens. Im Hinblick auf die internationale Wettbewerbsfähigkeit der deutschen Bauwirtschaft ist es unumgänglich, vorhandene Effizienzpotentiale in der Bauplanung auszuschöpfen, welche durch eine qualitative Verbesserung der Planung sowie durch eine Verringerung der Bearbeitungszeit aller beteiligten Fachplanern erreicht werden können. Nach dem gegenwärtigen Stand der Technik werden die Informationsobjekte standardisiert, damit sie durchgängig nutzbar sind. Diese werden in einem allgemeingültigen Format den speziellen Programmen der Fachplaner zur Verfügung gestellt. In dieser Arbeit wird der Ansatz verfolgt, eine Integration durch die Standardisierung der Kommunikation zwischen den Informationsobjekten und ihren Anwendungsprogrammen zu erreichen. Dabei kann auf die Standardisierung der zu übertragenden Objekte verzichtet werden. Ziel der Ausarbeitung ist die Definition von implementationstechnischen Regeln, die alle auszutauschenden Objekte sowie die Anwendungen, die solche Objekte aufnehmen wollen, erfüllen müssen. Die Bearbeitung der Objekte soll in den gewohnten Anwendungen in unveränderter Weise erfolgen. KW - Bauwesen KW - Datenaustausch KW - Standardisierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5483 ER - TY - THES A1 - Schneider, Ulrich T1 - Standardisierung der Kommunikation als Integrationsansatz für das Bauwesen T1 - Active Integration Concepts Based on a Communication Standard N2 - In dieser Arbeit wird eine neue Methode für die Integration von Informationen in digitalen Planungsunterlagen erarbeitet. Die Grundidee des Integrationsansatzes stützt sich auf die aktive Einbeziehung der Anwender während der Realisierung der Übernahme von Informationen und bei der Aktualisierung von Planungsunterlagen, die inkonsistent zu anderen Planungsunterlagen sind. Diese Grundidee kombiniert mit den Möglichkeiten neuer Kommunikationstechnologien war für die Spezifikation von neuen Methoden für die Übernahme von Informationen und für die Überwachung von Veränderungen ausschlaggebend. Die neuen Methoden werden in dieser Ausarbeitung erarbeitet und vorgestellt. Ziel der Ausarbeitung ist die Definition von implementationstechnischen Regeln, die alle auszutauschenden Objekte erfüllen müssen. Die Realisierung der Integrationsaufgaben durch den Anwender basiert dabei auf den Möglichkeiten der traditionellen Integration analoger Dokumente. N2 - In this paper a new method is developed for the integration of information in digital plans. The main idea based on an active user in the integration process. That means the user performs the transmitting of digital data and the topping of plans, which are inconsistent. This main idea combined with the new possibilities of the communication technology are the condition for developing new method including the task of integration. In this work a new method is developed and presented. Purpose of this work is the definition of implementation technique rules which have to come true for all objects shared. The specification of the action used by the users is based on the traditional ways possibilities. KW - Bauwesen KW - Kommunikationstechnik KW - Datenaustausch KW - Standardisierung KW - Aktive Integration KW - Kommunikationsdienst KW - COM KW - civil engineer . active integration KW - communications service KW - standard Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040311-751 ER - TY - CHAP A1 - Sotskov, Yuri N. T1 - Stability of an optimal schedule for a flow-shop problem with two jobs N2 - The problem F|n=2|F is to minimize the given objective function F(C1,m, C2,m) of completion times Ci,m of two jobs i Î J={1, 2} processed on m machines M={1, 2, …, m}. Both jobs have the same technological route through m machines. Processing time ti,k of job iÎ J on machine kÎ M is known. Operation preemptions are not allowed. Let R2m be space of non-negative 2m-dimensional real vectors t=(t1,1,…, t1,m, t2,1,…, t2,m) with Chebyshev’s distance d(t, t*). To solve problem F|n=2|F, we can use the geometric algorithm, which includes the following steps: 1) construct digraph (V, A) for problem F|n=2|F and find so-called border vertices in (V, A); 2) construct the set of trajectories corresponding to the shortest paths Rt in digraph (V, A) from the origin vertex to each of the border vertices; 3) find an optimal path in the set Rt that represents a schedule with minimal value of the objective function F. Let path tu Î Rt be optimal for the problem F|n=2|F with operation processing times defined by vector t. If for any small positive real number e > 0 there exists vector t*Î R2m such that d(t, t*) = e and path tu is not optimal for the problem F|n=2|F with operation processing times defined by vector t*, then optimality of path tu is not stable. The main result of the paper is the proof of necessary and sufficient conditions for optimality stability of path tu. If objective function F is continuous non-decreasing (e.g., makespan, total completion time, maximal lateness or total tardiness), then to test whether optimality of the path tu Î Rt is stable takes O(m log m) time. KW - Ablaufplanung KW - Reihenfolgeproblem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3690 ER - TY - CHAP A1 - Milbradt, Peter T1 - Stabilisierte Finite Elemente in der Hydrodynamik N2 - Hydro- und morphodynamischen Prozesse in Binnengewässern und im Küstennahbereich erzeugen hochkomplexe Phänomene. Zur Beurteilung der Entwicklung von Küstenzohnen, von Flussbetten sowie von Eingriffen des Menschen in Form von Schutzbauwerken sind geeignete numerische Modellwerkzeuge notwendig. Es wird ein holistischer Modellansatz zur Approximation gekoppelter Seegangs-, Strömungs- und Morphodynamischer Prozesse auf der Basis stabilisierter Finiter Elemente vorgestellt. Der Großteil der Modellgleichungen der Hydro- und Morphodynamik sind Transportgleichungen. Dem Transportcharakter dieser Gleichungen entsprechend wird ein stabilisiertes Finites Element Verfahren auf Dreiecken vorgestellt. Die vorgestellte Approximation entspricht einem streamline upwinding Petrov-Galerkin-Verfahrens für vektorwertige mehrdimensionale Probleme, bei dem der Fehler eines Standard-Galerkin-Verfahrens mit Hilfe eines Upwinding-Koeffizienten minimiert wird. Die Wahl des Upwinding-Koeffizienten ist übertragbar auf andere Problemklassen und basiert ausschließlich auf dem Charakter der zugrundeliegene Das Modell wurde für Seegangs- und Strömungs-Untersuchungen im Jade-Weser-Ästuar an der deutschen Nordseeküste eingesetzt. KW - Hydrodynamik KW - Finite-Elemente-Methode Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3327 ER - TY - CHAP A1 - Counsell, John T1 - Spatial Database Management and Generation of VRML Models N2 - The cost of keeping large area urban computer aided architectural design (CAAD) models up to date justifies wider use and access. This paper reviews the potential for collaborative groupwork creation and maintenance of such models and suggests an approach to data entry, data management and generation of appropriate levels of detail models from a Geographic Information System (GIS). Staff at the University of the West of England (UWE) modelled a large area of Bristol to demonstrate millennium landmark proposals. It became swiftly apparent that continued amendment of the model to keep it an accurate reflection of changes on the ground was a major data management problem. Piecing in new CAAD models received from Architectural Practices to visualise them in context as part of the planning negotiation process has often taken staff several days of work for each instance. The model is so complex and proprietary that Bristol City operates a specialist visualisation bureau service. UWE later modelled the environs of the Tower of London to support bids for funding and to provide the context for judging the visual impact of iterative design development. Further research continued to develop more effective approaches to. Data conversion and amalgamation from all the diverse sources was the major impediment to effective group working to create the models. It became apparent that a GIS would assist retrieving all the appropriate data that described the part of the model under creation. It was possible to predict that management of many historic part models stepping back through time, allowing for different expert interpretations to co-exist would be in itself a major task requiring a spatial database/GIS. UWE started afresh from the original source data, to explore the collaborative use of GIS and Virtual Reality Modelling Language (VRML) to integrate models and interventions from various sources and to generate an overall navigable interactive whole. Current exploration of the combination of event driven behaviours and Structured Query Language is seeking to define how appropriately to modify objects in the VRML model on demand. This is beginning to realise the potential for use of this process for: asynchronous group modelling on the lines of a collaborative virtual design studio; historic building maintenance management; visitor management; interpretation of historic sites to visitors and public planning information. KW - Raumordnung KW - Visualisierung KW - CAD / Architektur KW - Geographic Information System Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5791 ER - TY - CHAP A1 - Changwan, Kim A1 - Haas, Carl A1 - Caldas, Carlos T1 - Spatial data acquisition, integration, and modeling for real-time project life-cycle applications N2 - Current methods for site modeling employs expensive laser range scanners that produce dense point clouds which require hours or days of post-processing to arrive at a finished model. While these methods produce very detailed models of the scanned scene, useful for obtaining as-built drawings of existing structures, the associated computational time burden precludes the methods from being used onsite for real-time decision-making. Moreover, in many project life-cycle applications, detailed models of objects are not needed. Results of earlier research conducted by the authors demonstrated novel, highly economical methods that reduce data acquisition time and the need for computationally intensive processing. These methods enable complete local area modeling in the order of a minute, and with sufficient accuracy for applications such as advanced equipment control, simple as-built site modeling, and real-time safety monitoring for construction equipment. This paper describes a research project that is investigating novel ways of acquiring, integrating, modeling, and analyzing project site spatial data that do not rely on dense, expensive laser scanning technology and that enable scalability and robustness for real-time, field deployment. Algorithms and methods for modeling objects of simple geometric shape (geometric primitives from a limited number of range points, as well as methods provide a foundation for further development required to address more complex site situations, especially if dynamic site information (motion of personnel and equipment). Field experiments are being conducted to establish performance parameters and validation for the proposed methods and models. Initial experimental work has demonstrated the feasibility of this approach. KW - Bauwerk KW - Datenmanagement KW - Echtzeitsystem KW - Lebenszyklus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1280 ER - TY - JOUR A1 - Strukelj, A. T1 - Some Problems in Obtaining the Green's Function of the Layered Soil N2 - The frame of this paper is the development of methods and procedures for the description of the motion of an arbitrary shaped foundation. Since the infinite half-space cannot be properly described by a model of finite dimensions without violating the radiation condition, the basic problems are infinite dimensions of the half-space as well as its non-homogeneous nature. Consequently, an approach has been investigated to solve this problem indirectly by developing Green's function in which the non-homogeneity and the infiniteness of the half-space has been included. When the Green's function is known, the next step will be the evaluation of contact stresses acting between the foundation and the surface of the half-space through an integral equation. The equation should be solved in the area of the foundation using Green's function as the kernel. The derivation of three-dimensional Green's function for the homogeneous half-space (Kobayashi and Sasaki 1991) has been made using the potential method. Partial differential equations occurring in the problem have been made ordinary ones through the Hankel integral transform. The general idea for obtaining the three-dimensional Green's function for the layered half-space is similar. But in that case some additional phenomena may occur. One of them is the possibility of the appearance of Stonely surface waves propagating along the contact surfaces of layers. Their contribution to the final result is in most cases important enough that they should not be neglected. The main advantage of results presented in comparing to other obtained with numerical methods is their accuracy especially in the case of thin layers because all essential steps of Green's function evaluation except of the contour integration along the branch cut have been made analytically. On the other hand the disadvantage of this method is that the mathematical effort for obtaining the Green's function is increasing drastically with the increase of the number of layers. Future work will therefore be directed in simplifying of the above described process KW - Bodenmechanik KW - Geschichtetes Medium KW - Green-Funktion Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5388 ER - TY - JOUR A1 - Bucher, Christian A1 - Schorling, York T1 - SLang - the Structural Language : Solving Nonlinear and Stochastic Problems in Structural Mechanics N2 - Recent developments in structural mechanics indicate an increasing need of numerical methods to deal with stochasticity. This process started with the modeling of loading uncertainties. More recently, also system uncertainty, such as physical or geometrical imperfections are modeled in probabilistic terms. Clearly, this task requires close connenction of structural modeling with probabilistic modeling. Nonlinear effects are essential for a realistic description of the structural behavior. Since modern structural analysis relies quite heavily on the Finite Element Method, it seems to be quite reasonable to base stochastic structural analysis on this method. Commercially available software packages can cover deterministic structural analysis in a very wide range. However, the applicability of these packages to stochastic problems is rather limited. On the other hand, there is a number of highly specialized programs for probabilistic or reliability problems which can be used only in connection with rather simplistic structural models. In principle, there is the possibility to combine both kinds of software in order to achieve the goal. The major difficulty which then arises in practical computation is to define the most suitable way of transferring data between the programs. In order to circumvent these problems, the software package SLang (Structural Language) has been developed. SLang is a command interpreter which acts on a set of relatively complex commands. Each command takes input from and gives output to simple data structures (data objects), such as vectors and matrices. All commands communicate via these data objects which are stored in memory or on disk. The paper will show applications to structural engineering problems, in particular failure analysis of frames and shell structures with random loads and random imperfections. Both geometrical and physical nonlinearities are taken into account. KW - Baustatik KW - Nichtlineares Phänomen KW - Zufallsvariable KW - Programm Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4957 ER - TY - CHAP A1 - Schnellenbach-Held, Martina A1 - Denk, Heiko A1 - Geibig, Oliver T1 - SiReAM - An Agent Based Virtual Marketplace for AEC-Bidding N2 - Today´s procedures for the awarding of public construction performance contracts are mainly paper-based. Although the usage of electronic means is permitted in the VOB, the regulations are not sufficient yet. Especially software agents within the AEC-bidding process were not considered at all. The acceptance of an agent-based virtual marketplace for AEC-bidding depends on a reliable and trustworthy public key infrastructure according to the (German) digital signature act. Only if confidentiality, integrity, non-repudiation, and authentication are provided reliably, users will assign sensitive business processes like public tendering procedures to software agents. The development of a secure agent-based virtual marketplace for AEC-bidding according to legal regulations is an entirely new approach from a technical as well as from a legal point of view. The objective of this research project is the development of intelligent software-agents which are able to legally call for bids, to calculate proposals, and to award the successful bidder. KW - Ausschreibung KW - Virtuelles Unternehmen KW - Marketing Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3611 ER - TY - CHAP A1 - Hübner, Björn A1 - Walhorn, Elmar A1 - Kölke, Andreas T1 - Simultane Lösung gekoppelter Struktur-Fluid-Systeme T1 - A Simultaneous Solution Procedure for Fluid-Structure Interaction with Application to Civil Engineering Problems N2 - Ein simultanes Lösungsverfahren für Fluid-Struktur-Wechselwirkungen aus dem Bereich des Bauingenieurwesens wird vorgestellt. Die Modellierung der Tragwerksdynamik erfolgt mit der geometrisch nichtlinearen Elastizitätstheorie in total Lagrangescher Formulierung. Die Strömung wird mit den inkompressiblen Navier-Stokes-Gleichungen beschrieben. Wenn Turbulenzeffekte massgeblich sind, kommen die Reynolds-Gleichungen in Verbindung mit dem k-omega-Turbulenzmodell von Wilcox zum Einsatz. Zur Beschreibung von komplexen freien Oberflächen wird die Level-Set-Methode eingesetzt. Die einheitliche Diskretisierung von Fluid und Struktur mit der Raum-Zeit-Finite-Element-Methode führt zu einem konsistenten Berechnungsmodell für das gekoppelte System. Da die isoparametrischen Raum-Zeit-Elemente ihre Geometrie in Zeitrichtung ändern können, erlaubt die Methode eine natürliche Beschreibung des infolge der Strukturbewegung zeitveränderlichen Strömungsgebiets. Die gewichtete Integralformulierung der Kopplungsbedingungen mit globalen Freiwerten für die Interface-Spannungen sichert eine konservative Kopplung von Fluid und Struktur. Ausgewählte Anwendungsbeispiele zeigen die Leistungsfähigkeit der entwickelten Methodik und belegen die guten Konvergenzeigenschaften des simultanen Lösungsverfahrens. KW - Bauwerk KW - Dynamik KW - Modellierung KW - Flüssigkeit-Bauwerk-Wechselwirkung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3114 ER - TY - CHAP A1 - Fedior, Marco A1 - Hamel, Wido ED - Steiner, Maria ED - Theiler, Michael ED - Mirboland, Mahsa T1 - Simulationsumgebung zur Evaluation von umweltorientierten Verkehrsmanagement-Strategien T2 - 30. Forum Bauinformatik N2 - Der vorliegende Beitrag beschreibt die Problematik bei der Prognose verkehrsbedingter Schadstoff-Immissionen. Im Mittelpunkt steht die Entwicklung und der Aufbau einer Simulationsumgebung zur Evaluation von umweltorientierten Verkehrsmanagement-Strategien. Die Simulationsumgebung wird über die drei Felder Verkehr, Emission, Immission entwickelt und findet zunächst Anwendung in der Evaluation verkehrlicher Maßnahmen für die Friedberger Landstraße in Frankfurt am Main. KW - Verkehr KW - Simulation KW - Emission KW - Luftverunreinigender Stoff Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190328-38678 ER - TY - CHAP A1 - Reinhardt, Jan A1 - Garrett, James H. A1 - Akinci, Burcu T1 - SiDaCoS: Product and Process Models on Construction Sites N2 - Site superintendents performing project management tasks on construction sites need to access project documents and need to collect information that they observe while inspecting the site. Often, information that is observed on a construction site needs to be integrated into electronic documents or project control systems. In the future, we expect integrated product and process models to be the medium for storing and handling construction project management information. Even though mobile computing devices today are already capable of storing and handling such integrated product and process data models, the user interaction with such large and complex models is difficult and not adequately addressed in the existing research. In this paper, we introduce a system that supports project management tasks on construction sites effectively and efficiently by making integrated product and process models accessible. In order to effectively and efficiently enter or access information, site superintendents need visual representations of the project data that are flexible with respect to the level of detail, the decomposition structure, and the type of visual representation. Based on this understanding of the information and data collection needs, we developed the navigational model framework and the application Site Data Collection System (SiDaCoS), which implements that framework. The navigational model framework allows site superintendents to create customized representations of information contained in a product and process model that correspond to their data access and data collection needs on site. KW - Mobile Computing KW - Funknetz KW - Baustelle KW - Controlling KW - data collection KW - construction management KW - product and process models KW - system KW - Work Face Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1156 ER - TY - JOUR A1 - Möller, B. A1 - Beer, M. A1 - Graf, W. A1 - Hoffmann, Alfred T1 - Sicherheitsbeurteilung von Tragwerken mit Fuzzy-Modellen N2 - Die Sicherheit von Tragwerken hängt von der zuverlässigen Modellierung sämtlicher Tragwerksparameter ab. Üblicherweise werden diese Parameter als deterministische oder stochastische Größen beschrieben. Stochastische Größen sind Zufallsgrößen, die unscharfe Informationen über Tragwerksparameter mit Hilfe von Dichtefunktionen erfassen. Nicht alle unscharfen Tragwerksparameter lassen sich als Zufallsgrößen darstellen. Sie können jedoch als Fuzzy-Größen modelliert werden. Fuzzy-Größen beschreiben unscharfe Tragwerksparameter als unscharfe Menge mit Bewertungsfunktion (Zugehörigkeitsfunktion). Die Fuzzy-Modellierung im Bauingenieurwesen umfaßt die Fuzzifizierung, die Fuzzy-Analyse, die Defuzzifizierung und die Sicherheitsbeurteilung. Sie erlaubt es, Tragwerke mit nicht-stochastischen unscharfen Eingangsinformationen zu untersuchen. Nicht-stochastische Eingangsinformationen treten sowohl bei bestehenden als auch bei neuen Tragwerken auf. Die unscharfen Ergebnisse der Fuzzy-Modellierung gestatten es, das Systemverhalten zutreffender zu beurteilen; sie sind die Ausgangspunkte für eine neue Sicherheitsbeurteilung auf der Grundlage der Möglichkeitstheorie. Bei der Fuzzy-Analyse ist die alpha-Diskretisierung vorteilhaft einsetzbar. Bei fehlender Monotonie der deterministischen Berechnungen und unter Berücksichtigung der Nichtlinearität wird die Fuzzy-Analyse mit Optimierungsalgorithmen durchgeführt. Zwei Beispiele werden diskutiert: die Lösung eines transzendenten Eigenwertproblems und eines linearen Gleichungssystems. Die Systemantworten der Fuzzy-Analyse werden der Sicherheitsbeurteilung zugrunde gelegt. Für ausgewählte physikalische Größen werden Versagensfunktionen definiert. Diese bewerten die Möglichkeit des Versagens. Mit Hilfe von Min-max-Operationen der Fuzzy-Set-Theorie erhält man aus Versagensfunktion und Fuzzy-Antwort die Versagensmöglichkeit bzw. die Überlebensmöglichkeit. Die ermittelte Versagensmöglichkeit repräsentiert die subjektive Beurteilung der Möglichkeit, daß das Ereignis &qout;Versagen&qout; eintritt. Beispiele zeigen die Unterschiede zwischen der Sicherheitsbeurteilung mittels Fuzzy-Modells und mittels deterministischen Modells. KW - Tragwerk KW - Sicherheit KW - Fuzzy-Logik Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4625 ER - TY - CHAP A1 - Müller, Karl-Heinz T1 - Sicherheitsbeurteilung der Grenzlastzustände von Stahlbetontragwerken N2 - Die Berücksichtigung stochastischer System- und Lastparameter bei der nach EC zulässigen Analyse des Tragwerksverhaltens unter Berücksichtigung globalen nichtlinearen Systemverhaltens sind notwendig, da dies ein anderes Sicherheitskonzept erfordert. Wird der plastische Grenzlastfaktor (PGLF), der die Ausnutzung der Systemkapazitäten bis zum Kollaps ermöglicht, zur Grenzzustandsbeurteilung herangezogen, wird dies besonders deutlich. Für das Modell eines ebenen Stahlbetontragwerks wird starr-ideal-plastisches Materialverhalten vorausgesetzt. Die Bestimmung des PGLFs für ein gegebenes Lastbild kann ausgehend von einem Extremalprinzip über die Lösung einer Optimierungsaufgabe erfolgen. Diese direkte Bestimmung des Kollapses bereitet aber bei der stochastischen Analyse Schwierigkeiten, da die zugehörigen Grenzzustandsgleichungen (GZG) nicht gutartig sind. Es wird die stochastische Methode des Multi-Modal Importance Sampling (MMIS) vorgeschlagen, die unter Berücksichtigung der Eigenschaften dieses mechanischen Modells die Versagenswahrscheinlichkeit bestimmt, d.h. das Verfahren nimmt auf die nur stückweise Stetigkeit GZG des speziellen Problems Rücksicht. Es setzt die zugehörige Grenzzustandsfunktion voraus. Die wesentlichen Bemessungspunkte werden durch Anwendung des Betaverfahrens gesucht und dann mit einem Importance-Sampling-Algorithmus mit multimodaler Sampling Dichte die Versagenswahrscheinlichkeit bestimmt . Das Verfahren sucht und berücksichtigt die wesentlichen Versagensbereiche des Problems mit vertretbarem Aufwand. Verbesserungen könnten sowohl bei den enthaltenen Such- und Iterationsalgorithmen als auch bei der Wahl der einzelnen Sampling-Dichten erzielt werden, was Gegenstand weiterer Untersuchungen ist. KW - Tragwerk KW - Stahlbeton KW - Tragverhalten KW - Sicherheit KW - Wahrscheinlichkeitsrechnung Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6059 ER - TY - CHAP A1 - Henning, André T1 - Short Listing für multikriterielle Job-Shop Scheduling Probleme N2 - In ersten Teil des Vortrages wird eine Heuristik zur Approximation der Pareto Menge multikriterielle verallgemeinerter Job-Shop Scheduling-Probleme vorgestellt. Der Algorithmus basiert auf einer genetischen lokale Suche Heuristik. Die Mittelwertbildung der Startzeiten der Vorgänge wurde hierbei als Rekombinationsoperator verwendet. Als lokale Suche wurde ein Threshold Accepting Algorithmus implementiert. Der Algorithmus wurde auf einer großen Menge von Benchmark-Instanzen und den Zielfunktionen Makespan, Tardiness, Lateness und Summe der Fertigstellungszeiten getestet. Die Ergebnisse zu den verschiedenen Zielfunktionen werden vorgestellt. Die vom Algorithmus erzeugte Approximation der Pareto Menge kann eine große Anzahl von Lösungen enthalten. Aus dieser Menge muss der Entscheidungsträger eine Lösung auswählen. Da die Datenmenge schon bei moderaten Problemdimensionen sehr umfangreich wird, stellt dies ein Problem für den Entscheider dar. Deshalb muss die große Menge der Lösungen auf eine überschaubare Anzahl reduziert werden. Bei dieser Reduktion der Lösungen muss die Diversität der verbleibenden Lösungen beachtet werden. Diese Reduzierung wird als Short Listing bezeichnet und im zweiten Teil des Vortrages vorgestellt. Im ersten Schritt des Short Listings werden die Lösungen mittels Abstandsmaßen im Lösungsraum geclustert. Die dazu verwendeten Abstandsmaße werden auf den Permutationen der Vorgänge auf den Ressourcen definiert. Es wurden fünf Abstandsmaße und zwei Clusterverfahren, ein hierarchisches und ein nicht-hierarchisches, untersucht. Im zweiten Schritt wird aus jedem Cluster jeweils eine Lösung ausgewählt und dem Entscheidungsträger vorgelegt. Dabei wurden zwei Methoden untersucht. Im ersten Fall wurde die bezüglich einer Ranking-Funktion beste Lösung und im zweiten Fall die Medianlösung bezüglich des Abstandsmaßes ausgewählt. Die Abstandsmaße, Clusteralgorithmen und Auswahlmethoden wurden auf einer großen Menge von Benchmark-Instanzen verglichen. Die Ergebnisse werden im Vortrag vorgestellt. KW - Reihenfolgeproblem Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2988 ER - TY - JOUR A1 - Emelichev, V. A. A1 - Girlich, E. A1 - Podkopaev, D. P. T1 - Several kinds of Stability of efficient Solutions in Vector Trajectorial discrete Optimization Problem N2 - This work was partially supported by DAAD, Fundamental Researches Foundation of Belarus and International Soros Science Education Program We consider a vector discrete optimization problem on a system of non- empty subsets (trajectories) of a finite set. The vector criterion of the pro- blem consists partial criterias of the kinds MINSUM, MINMAX and MIN- MIN. The stability of eficient (Pareto optimal, Slater optimal and Smale op- timal) trajectories to perturbations of vector criterion parameters has been investigated. Suficient and necessary conditions of eficient trajectories local stability have been obtained. Lower evaluations of eficient trajectories sta- bility radii, and formulas in several cases, have been found for the case when l(inf) -norm is defined in the space of vector criterion parameters. KW - Diskrete Optimierung KW - Stabilität KW - Trajektorie (Mathematik) Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5030 ER - TY - JOUR A1 - Dzwigon, Wieslaw T1 - Schätzung der Verkehrs-Verteilung (O-D Matrix) bei der Anwendung der Verkehrsstärkemessung in den Straßenquerschnitten N2 - O-D Matrix sind die wichtigste Informationsquelle, die den Bedarf an Transport in der Stadt betrifft. Sie dienen den richtigen Bildung von Straßennetz und Öffentlichen Personen Verkehrslinien. Anhand diesen Grundlagen gerechnet man Verkehrsstärken, die zur Dimensionierung der Verkehrsinfrastruktur benutzt werden. Im Verkehrsplannung zur Rechnung O-D Matrix wird Vier - Stufen - Methode angewendet. In dieser Methode verwendet man die Angaben aus den Haushaltsumfragen und aus den Kordonumfragen. Diese Methode fordert einen großen Arbeitsaufwand und Kosten. Hier wird die andere Methode dargestellt. Bei Schätzung der O-D Matrix verwendet man die Verkehrsstärken, die in den Straßenquerschnitten gemessen werden. Wir brauchen gemessene Verkehrsstärken auch für andere Ziele (z. B. für Signalsteuerung, für Beobachtung des Motorisierungstrendes). Darum ist diese Methode billiger als das traditionelle Verfahren. In diesen Methode haben wir zwei Möglichkeiten. Die erste - von Verkehrsstärkemessungen kann man O-D Matrix direkt schätzen. Und zweite Möglichkeit - zuerst rechnen wir die Verkehrserzeugungen und später O-D Matrix. Das zweite Verfahren hat einen wesentlichen Vorteil und zwar, anhand der Verkehrserzeugungen ist es möglich alle Elemente O-D Matrix zu rechnen. Bei der Schätzung der O-D Matrix unmittelbar von den Messungen (das erste Verfahren) bekommt man nur diese Elemente, die in den beobachtenen Straßenquerschnitten auftreten. KW - Stadtverkehr KW - Verkehrsaufkommen Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4647 ER - TY - CHAP A1 - Adamski, A. A1 - Bryniarska, Z. T1 - Schedule Synchronisation in public Transport by Tabu Search and Genetic Method N2 - This paper concerns schedule synchronization problems in public transit networks. In particular, it consists of three main parts. In the first the subject area is introduced, the terms are defined and framework for optimal synchronization in the form of problem representation and formulation is proposed. The second part is devoted to transfer synchronization problem when passengers changing transit lines at transfer points. The intergrated Tabu Search and Genetic solution method is developed with respect to this specific problem. The third part deals with headways harmonization problem i.e. synchronization of different transit lines schedules on a common segments of routes. For the solution of this problem a new bilevel optimization method is proposed with zones harmonization at the bottom level and co-ordination of zones, by time buffers assigned to timing points, at the upper level. Finally, the synchronization problems are numerically illustrated by real-life examples of the public transport lines in Cracow. KW - Öffentlicher Personennahverkehr KW - Verkehrsnetz KW - Synchronisierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4146 ER - TY - CHAP A1 - Lehner, Karlheinz A1 - Hartmann, Dietrich T1 - Scenarios for the deployment of distributed engineering applications N2 - Although there are some good reasons to design engineering software as a stand-alone application for a single computer, there are also numerous possibilities for creating distributed engineering applications, in particular using the Internet. This paper presents some typical scenarios how engineering applications can benefit from including network capabilities. Also, some examples of Internet-based engineering applications are discussed to show how the concepts presented can be implemented. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Internet Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1476 ER - TY - CHAP A1 - Hartmann, Veronika A1 - Smarsly, Kay A1 - Lahmer, Tom ED - Gürlebeck, Klaus ED - Lahmer, Tom T1 - ROBUST SCHEDULING IN CONSTRUCTION ENGINEERING T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar N2 - In construction engineering, a schedule’s input data, which is usually not exactly known in the planning phase, is considered deterministic when generating the schedule. As a result, construction schedules become unreliable and deadlines are often not met. While the optimization of construction schedules with respect to costs and makespan has been a matter of research in the past decades, the optimization of the robustness of construction schedules has received little attention. In this paper, the effects of uncertainties inherent to the input data of construction schedules are discussed. Possibilities are investigated to improve the reliability of construction schedules by considering alternative processes for certain tasks and by identifying the combination of processes generating the most robust schedule with respect to the makespan of a construction project. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Building Information Modeling KW - Computerunterstütztes Verfahren KW - Data, information and knowledge modeling in civil engineering; Function theoretic methods and PDE in engineering sciences; Mathematical methods for (robotics and) computer vision; Numerical modeling in engineering; Optimization in engineering applications Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27994 SN - 1611-4086 ER - TY - JOUR A1 - Likhitruangsilp, Veerasak A1 - Ioannou, Photios T1 - Risk-sensitive Markov Decision Process for Underground Construction Planning and Estimating N2 - This paper presents an application of dynamic decision making under uncertainty in planning and estimating underground construction. The application of the proposed methodology is illustrated by its application to an actual tunneling project—The Hanging Lake Tunnel Project in Colorado, USA. To encompass the typical risks in underground construction, tunneling decisions are structured as a risk-sensitive Markov decision process that reflects the decision process faced by a contractor in each tunneling round. This decision process consists of five basic components: (1) decision stages (locations), (2) system states (ground classes and tunneling methods), (3) alternatives (tunneling methods), (4) ground class transition probabilities, and (5) tunneling cost structure. The paper also presents concepts related to risk preference that are necessary to model the contractor’s risk attitude, including the lottery concept, utility theory, and the delta property. The optimality equation is formulated, the model components are defined, and the model is solved by stochastic dynamic programming. The main results are the optimal construction plans and risk-adjusted project costs, both of which reflect the dynamics of subsurface construction, the uncertainty about geologic variability as a function of available information, and the contractor’s risk preference. KW - Mehragentensystem KW - Lernendes System KW - Tunnel KW - Markowschke KW - Kette Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2247 ER - TY - CHAP A1 - Petkov, Zdravko B. A1 - Christov, Christo T. T1 - Response Spectra Evaluation Including Pounding Effect N2 - Most of the existing seismic resistant design codes are based on the response spectrum theory. The influence of inelastic deformations can be evaluated by considering inelastic type of resisting force and then the inelastic spectrum is considerably different from the elastic one. Also, the influence of stiffness degradation and strength deterioration can be accounted for by including more precise models from material point of view. In some recent papers the corresponding changes in response spectra due to the P- Ä effect are discussed. The experience accumulated from the recent earthquakes indicates that structural pounding may considerably influence the response of structures and should be taken into account in design procedures. The most convenient way to do that is to predict the influence of the pounding on the response spectra for accelerations, velocities and displacements. Generally speaking the contact problems such as pounding are characterized by large extent of nonlinearity and slow convergence of the computational procedures. Thus obtaining spectra where the contact problem is accounted for seems very attractive from engineering point of view because could easy be implemented into the design procedures. However it is worth nothing that there is not rigorous mathematical proof that the original system can be decomposed into single equations related to single degree of freedom systems. It is the porpose of the paper to study the influence of the pounding on the response spectra and to evaluate the amplification due to the impact. For this purpose two adjacent SDOF systems are considered that are able to interact during the vibration process. This problem is solved versus the elastic stiffness ratio, which appears to be very important for such assemblage. The contact between masses is numerically simulated using opening gap elements as links. Comparisons between calculated response spectra and linear response spectra are made in order to derive analytical relationships to simply obtain the contribution of pounding. The results are graphically illustrated in response spectra format and the influence of the stiffness ratio is clarified. KW - Bauwerk KW - Erdbebenbelastung KW - Stochastischer Prozess Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3464 ER -