TY - JOUR A1 - Zhang, Chao A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Rabczuk, Timon T1 - Multiple cracks identification for piezoelectric structures JF - International Journal of Fracture N2 - Multiple cracks identification for piezoelectric structures KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2017 SP - 1 EP - 19 ER - TY - JOUR A1 - Nguyen-Tuan, Long A1 - Könke, Carsten A1 - Bettzieche, Volker A1 - Lahmer, Tom T1 - Numerical modeling and validation for 3D coupled-nonlinear thermo-hydro-mechanical problems in masonry dams JF - Computers & Structures N2 - Numerical modeling and validation for 3D coupled-nonlinear thermo-hydro-mechanical problems in masonry dams KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2017 SP - 143 EP - 154 ER - TY - JOUR A1 - Achenbach, Marcus A1 - Lahmer, Tom A1 - Morgenthal, Guido T1 - Global Sensitivity Analysis of Reinforced Concrete Walls Subjected to Standard Fire - A Comparison of Methods JF - 14th International Probabilistic Workshop N2 - Global Sensitivity Analysis of Reinforced Concrete Walls Subjected to Standard Fire—A Comparison of Methods KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2017 SP - 97 EP - 106 ER - TY - JOUR A1 - Göbel, Luise A1 - Lahmer, Tom A1 - Osburg, Andrea T1 - Uncertainty analysis in multiscale modeling of concrete based on continuum micromechanics JF - European Journal of Mechanics-A/Solids N2 - Uncertainty analysis in multiscale modeling of concrete based on continuum micromechanics KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2017 ER - TY - JOUR A1 - Alalade, Muyiwa A1 - Nguyen-Tuan, Long A1 - Wuttke, Frank A1 - Lahmer, Tom T1 - Damage identification in gravity dams using dynamic coupled hydro-mechanical XFEM JF - International Journal of Mechanics and Materials in Design N2 - Damage identification in gravity dams using dynamic coupled hydro-mechanical XFEM. KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2017 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.3596 SP - 1 EP - 19 ER - TY - JOUR A1 - Zhang, Chao A1 - Wang, Cuixia A1 - Lahmer, Tom A1 - He, Pengfei A1 - Rabczuk, Timon T1 - A dynamic XFEM formulation for crack identification JF - International Journal of Mechanics and Materials in Design N2 - A dynamic XFEM formulation for crack identification KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 427 EP - 448 ER - TY - JOUR A1 - Nguyen-Tuan, Long A1 - Lahmer, Tom A1 - Datcheva, Maria A1 - Stoimenova, Eugenia A1 - Schanz, Tom T1 - A novel parameter identification approach for buffer elements involving complex coupled thermo-hydro-mechanical analyses JF - Computers and Geotechnics N2 - A novel parameter identification approach for buffer elements involving complex coupled thermo-hydro-mechanical analyses KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 23 EP - 32 ER - TY - JOUR A1 - Vu-Bac, N. A1 - Lahmer, Tom A1 - Zhuang, Xiaoying A1 - Nguyen-Thoi, T. A1 - Rabczuk, Timon T1 - A software framework for probabilistic sensitivity analysis for computationally expensive models JF - Advances in Engineering Software N2 - A software framework for probabilistic sensitivity analysis for computationally expensive models KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 19 EP - 31 ER - TY - JOUR A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Zhuang, Xiaoying A1 - Park, Harold S. A1 - Rabczuk, Timon T1 - Topology optimization of piezoelectric nanostructures JF - Journal of the Mechanics and Physics of Solids N2 - Topology optimization of piezoelectric nanostructures KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 316 EP - 335 ER - TY - JOUR A1 - Ghorashi, Seyed Shahram A1 - Lahmer, Tom A1 - Bagherzadeh, Amir Saboor A1 - Zi, Goangseup A1 - Rabczuk, Timon T1 - A stochastic computational method based on goal-oriented error estimation for heterogeneous geological materials JF - Engineering Geology N2 - A stochastic computational method based on goal-oriented error estimation for heterogeneous geological materials KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 ER - TY - JOUR A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Zhuang, Xiaoying A1 - Zi, Goangseup A1 - Rabczuk, Timon T1 - Detection of material interfaces using a regularized level set method in piezoelectric structures JF - Inverse Problems in Science and Engineering N2 - Detection of material interfaces using a regularized level set method in piezoelectric structures KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 153 EP - 176 ER - TY - JOUR A1 - Lahmer, Tom A1 - Bock, Sebastian A1 - Hildebrand, Jörg A1 - Gürlebeck, Klaus T1 - Non-destructive identification of residual stresses in steel under thermal loadings JF - Inverse Problems in Science and Engineering N2 - Non-destructive identification of residual stresses in steel under thermal loadings KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 1 EP - 17 ER - TY - JOUR A1 - Nguyen-Tuan, Long A1 - Lahmer, Tom A1 - Datcheva, Maria A1 - Schanz, Tom T1 - Global and local sensitivity analyses for coupled thermo‐hydro‐mechanical problems JF - International Journal for Numerical and Analytical Methods in Geomechanics N2 - Global and local sensitivity analyses for coupled thermo‐hydro‐mechanical problems KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 ER - TY - JOUR A1 - Marzban, Samira A1 - Lahmer, Tom T1 - Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects JF - Journal of Statistical Theory and Practice N2 - Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 589 EP - 611 ER - TY - JOUR A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Rabczuk, Timon T1 - Detection of multiple flaws in piezoelectric structures using XFEM and level sets JF - International Journal for Numerical Methods in Engineering N2 - Detection of multiple flaws in piezoelectric structures using XFEM and level sets KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 960 ER - TY - JOUR A1 - Lahmer, Tom A1 - Nguyen-Tuan, Long A1 - Könke, Carsten A1 - Bettzieche, Volker T1 - Thermo-hydro-mechanische 3-D-Simulation von Staumauern‐Modellierung und Validierung JF - WASSERWIRTSCHAFT N2 - Thermo-hydro-mechanische 3-D-Simulation von Staumauern‐Modellierung und Validierung KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 27 EP - 30 ER - TY - JOUR A1 - Lahmer, Tom A1 - Ilg, J. A1 - Lerch, Reinhard T1 - Variance-based sensitivity analyses of piezoelectric models JF - Computer Modeling in Engineering & Sciences N2 - Variance-based sensitivity analyses of piezoelectric models KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2015 SP - 105 EP - 126 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Lu, Lixin A1 - Zhang, Zhiliang A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates JF - Computational Materials Science N2 - Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 432 EP - 438 ER - TY - JOUR A1 - Ben, S. A1 - Zhao, Jun-Hua A1 - Zhang, Yancheng A1 - Rabczuk, Timon T1 - The interface strength and debonding for composite structures: review and recent developments JF - Composite Structures N2 - The interface strength and debonding for composite structures: review and recent developments KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Jia, Yue A1 - Wei, Ning A1 - Rabczuk, Timon T1 - Binding energy and mechanical stability of two parallel and crossing carbon nanotubes JF - Journal of Applied Mechanics N2 - Binding energy and mechanical stability of two parallel and crossing carbon nanotubes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 ER - TY - JOUR A1 - Kumar, S. A1 - Singh, I. A1 - Mishra, B.K. A1 - Rabczuk, Timon T1 - Modeling and Simulation of Kinked Cracks by Virtual Node XFEM JF - Computer Methods in Applied Mechanics and Engineering N2 - Modeling and Simulation of Kinked Cracks by Virtual Node XFEM KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 1425 EP - 1466 ER - TY - JOUR A1 - Jiang, Jin-Wu A1 - Rabczuk, Timon A1 - Park, Harold S. T1 - A Stillinger-Weber Potential for Single-Layer Black Phosphorus, and the Importance of Cross-Pucker Interactions for Negative Poisson's Ratio and Edge Stress-Induced Bending JF - Nanoscale N2 - The distinguishing structural feature of single-layered black phosphorus is its puckered structure, which leads to many novel physical properties. In this work, we first present a new parameterization of the Stillinger–Weber potential for single-layered black phosphorus. In doing so, we reveal the importance of a cross-pucker interaction term in capturing its unique mechanical properties, such as a negative Poisson's ratio. In particular, we show that the cross-pucker interaction enables the pucker to act as a re-entrant hinge, which expands in the lateral direction when it is stretched in the longitudinal direction. As a consequence, single-layered black phosphorus has a negative Poisson's ratio in the direction perpendicular to the atomic plane. As an additional demonstration of the impact of the cross-pucker interaction, we show that it is also the key factor that enables capturing the edge stress-induced bending of single-layered black phosphorus that has been reported in ab initio calculations. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 U6 - http://dx.doi.org/10.1039/C4NR07341J ER - TY - JOUR A1 - Talebi, Hossein A1 - Silani, Mohammad A1 - Rabczuk, Timon T1 - Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation JF - Advances in Engineering Software N2 - Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 82 EP - 92 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Brighenti, Roberto A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Rabczuk, Timon T1 - Optimum fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach JF - Structural and Multidisciplinary Optimization N2 - Optimum _ber content and distribution in _ber-reinforced solids using a reliability and NURBS based sequential optimization approach KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 99 EP - 112 ER - TY - JOUR A1 - Areias, Pedro A1 - Rabczuk, Timon A1 - Cesar de Sa, J.M. A1 - Jorge, R.N. T1 - A semi-implicit _nite strain shell algorithm using in-plane strains based on least-squares JF - Computational Mechanics N2 - A semi-implicit _nite strain shell algorithm using in-plane strains based on least-squares KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 ER - TY - JOUR A1 - Vu-Bac, N. A1 - Silani, Mohammad A1 - Lahmer, Tom A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs) JF - Computational Materials Science N2 - A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs) KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2015 SP - 520 EP - 535 ER - TY - JOUR A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Zhuang, Xiaoying A1 - Zi, Goangseup A1 - Rabczuk, Timon T1 - Detection of material interfaces using a regularized level set method in piezoelectric structures JF - Inverse Problems in Science and Engineering N2 - Detection of material interfaces using a regularized level set method in piezoelectric structures KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2015 ER - TY - JOUR A1 - Vu-Bac, N. A1 - Rafiee, Roham A1 - Zhuang, Xiaoying A1 - Lahmer, Tom A1 - Rabczuk, Timon T1 - Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters JF - Composites Part B: Engineering N2 - Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2015 SP - 446 EP - 464 ER - TY - JOUR A1 - Msekh, Mohammed Abdulrazzak A1 - Sargado, M. A1 - Jamshidian, M. A1 - Areias, Pedro A1 - Rabczuk, Timon T1 - ABAQUS implementation of phase_field model for brittle fracture JF - Computational Materials Science N2 - ABAQUS implementation of phase_field model for brittle fracture KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 472 EP - 484 ER - TY - JOUR A1 - Zhao, Jiyun A1 - Lu, Lixin A1 - Rabczuk, Timon T1 - The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers JF - Computational Materials Science N2 - The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 567 EP - 572 ER - TY - JOUR A1 - Anitescu, Cosmin A1 - Jia, Yue A1 - Zhang, Yongjie A1 - Rabczuk, Timon T1 - An isogeometric collocation method using superconvergent points JF - Computer Methods in Applied Mechanics and Engineer-ing N2 - An isogeometric collocation method using superconvergent points KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 1073 EP - 1097 ER - TY - JOUR A1 - Areias, Pedro A1 - Rabczuk, Timon A1 - Cesar de Sa, J.M. A1 - Garcao, J.E. T1 - Finite strain quadrilateral shell using least-squares _t of relative Lagrangian in-plane strains JF - Finite Elements in Analysis and Design N2 - Finite strain quadrilateral shell using least-squares _t of relative Lagrangian in-plane strains KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 26 EP - 40 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Kerfriden, Pierre A1 - Bordas, Stéphane Pierre Alain A1 - Muthu, Jacob A1 - Zi, Goangseup A1 - Rabczuk, Timon T1 - Interfacial shear stress optimization in sandwich beams with polymeric core using nonuniform distribution of reinforcing ingredients JF - Composite Structures N2 - Interfacial shear stress optimization in sandwich beams with polymeric core using nonuniform distribution of reinforcing ingredients KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 221 EP - 230 ER - TY - JOUR A1 - Jia, Yue A1 - Zhang, Yongjie A1 - Rabczuk, Timon T1 - A Novel Dynamic Multilevel Technique for Image Registration JF - Computers and Mathematics with Applications N2 - A Novel Dynamic Multilevel Technique for Image Registration KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 ER - TY - JOUR A1 - Areias, Pedro A1 - Rabczuk, Timon A1 - Queiros de Melo, F. J. M. A1 - Cesar de Sa, J.M. T1 - Coulomb frictional contact by explicit projection in the cone for _nite displacement quasi-static problems JF - Computational Mechanics N2 - Coulomb frictional contact by explicit projection in the cone for _nite displacement quasi-static problems KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 57 EP - 72 ER - TY - JOUR A1 - Silani, Mohammad A1 - Talebi, Hossein A1 - Ziaei-Rad, S. A1 - Hamouda, A.M.S. A1 - Zi, Goangseup A1 - Rabczuk, Timon T1 - A three dimensional Extended Arlequin Method for Dynamic Fracture JF - Computational Materials Science N2 - A three dimensional Extended Arlequin Method for Dynamic Fracture KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 425 EP - 431 ER - TY - JOUR A1 - Mortazavi, Bohayra A1 - Cuniberti, G. A1 - Rabczuk, Timon T1 - Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study JF - Computational Materials Science N2 - Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 285 EP - 289 ER - TY - JOUR A1 - Budarapu, Pattabhi Ramaiah A1 - Narayana, T.S.S. A1 - Rammohan, B. A1 - Rabczuk, Timon T1 - Directionality of sound radiation from rectangular panels JF - Applied Acoustics N2 - Directionality of sound radiation from rectangular panels KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 128 EP - 140 ER - TY - JOUR A1 - König, Reinhard T1 - Urban Design Synthesis for Building Layouts : Urban Design Synthesis for Building Layouts based on Evolutionary Many-Criteria Optimization JF - International Journal of Architectural Computing N2 - When working on urban planning projects there are usually multiple aspects to consider. Often these aspects are contradictory and it is not possible to choose one over the other; instead, they each need to be fulfilled as well as possible. In this situation ideal solutions are not always found because they are either not sought or the problems are regarded as being too complex for human capabilities.To improve this situation we propose complementing traditional design approaches with a design synthesis process based on evolutionary many-criteria optimization methods that can fulfill formalizable design requirements. In addition we show how self-organizing maps can be used to visualize many-dimensional solution spaces in an easily analyzable and comprehensible form.The system is presented using an urban planning scenario for the placement of building volumes. KW - Design synthesis KW - Optimization KW - Evolutionary algorithm KW - Multi-criteria Y1 - 2015 UR - http://journals.sagepub.com/doi/10.1260/1478-0771.13.3-4.257 U6 - http://dx.doi.org/10.1260/1478-0771.13.3-4.257 N1 - Originaldokument kann leider nicht bereitgestellt werden, da der Verlag die Verwertungsrechte hat. Der Link führt zum Artikel. SP - 257 EP - 270 ER - TY - JOUR A1 - Arash, Behrouz A1 - Rabczuk, Timon A1 - Jiang, Jin-Wu T1 - Nanoresonators and their applications: a state of the art review JF - Applied Physics Reviews N2 - Nanoresonators and their applications: a state of the art review KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 ER - TY - JOUR A1 - Mortazavi, Bohayra A1 - Rabczuk, Timon T1 - Multiscale modeling of heat conduction in graphene laminates JF - Carbon N2 - Multiscale modeling of heat conduction in graphene laminates KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 1 EP - 7 ER - TY - JOUR A1 - Thai, Chien H. A1 - Nguyen-Xuan, Hung A1 - Bordas, Stéphane Pierre Alain A1 - Nguyen-Thanh, Nhon A1 - Rabczuk, Timon T1 - Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory JF - Mechanics of Advanced Materials and Structures N2 - Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 451 EP - 469 ER - TY - JOUR A1 - Yang, Shih-Wei A1 - Budarapu, Pattabhi Ramaiah A1 - Mahapatra, D.R. A1 - Bordas, Stéphane Pierre Alain A1 - Zi, Goangseup A1 - Rabczuk, Timon T1 - A Meshless Adaptive Multiscale Method for Fracture JF - Computational Materials Science N2 - A Meshless Adaptive Multiscale Method for Fracture KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 382 EP - 395 ER - TY - JOUR A1 - Hamdia, Khader A1 - Lahmer, Tom A1 - Nguyen-Thoi, T. A1 - Rabczuk, Timon T1 - Predicting The Fracture Toughness of PNCs: A Stochastic Approach Based on ANN and ANFIS JF - Computational Materials Science N2 - Predicting The Fracture Toughness of PNCs: A Stochastic Approach Based on ANN and ANFIS KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2015 SP - 304 EP - 313 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Valizadeh, Navid A1 - Nguyen, Manh Hung A1 - Nguyen-Xuan, Hung A1 - Zhuang, Xiaoying A1 - Areias, Pedro A1 - Zi, Goangseup A1 - Bazilevs, Yuri A1 - De Lorenzis, Laura A1 - Rabczuk, Timon T1 - An extended isogeometric thin shell analysis based on Kirchhoff-Love theory JF - Computer Methods in Applied Mechanics and Engineering N2 - An extended isogeometric thin shell analysis based on Kirchho_-Love theory KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 265 EP - 291 ER - TY - JOUR A1 - Rabizadeh, Ehsan A1 - Saboor Bagherzadeh, Amir A1 - Rabczuk, Timon T1 - Application of goal-oriented error estimation and adaptive mesh refinement on thermo-mechanical multifield problems JF - Computational Materials Science N2 - Application of goal-oriented error estimation and adaptive mesh re_nement on thermo-mechanical multi_eld problems KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 27 EP - 44 ER - TY - JOUR A1 - Ghorashi, Seyed Shahram A1 - Valizadeh, Navid A1 - Mohammadi, S. A1 - Rabczuk, Timon T1 - T-spline based XIGA for Fracture Analysis of Orthotropic Media JF - Computers & Structures N2 - T-spline based XIGA for Fracture Analysis of Orthotropic Media KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2015 SP - 138 EP - 146 ER - TY - THES A1 - Elzanowski, Jerzy T1 - Ruin conversions : violence, architecture and commemoration in post-1944 Warsaw N2 - Promotion an der Bauhaus-Universität Weimar (Dr. phil.) und zugleich PhD an der University of British Columbia Vancouver. 2015 auf dem Server der University of British Columbia mit Embargo veröffentlicht. Das Embargo wird immer wieder verlängert. Aktuell: This item is embargoed until 2026-06-30, you need to request access to be able to view the item's media before that date. KW - Umwandlung KW - Ruine KW - Umbau Y1 - 2015 UR - http://hdl.handle.net/2429/50265 U6 - http://dx.doi.org/10.14288/1.0166955 ER - TY - JOUR A1 - Xu, G. A1 - Mourrain, B. A1 - Galligo, A. A1 - Rabczuk, Timon T1 - High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods JF - Computational Mechanics N2 - High-quality construction of analysis-suitable trivariate NURBS solids by reparameterization methods KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Silani, Mohammad A1 - Ziaei-Rad, S. A1 - Talebi, Hossein A1 - Rabczuk, Timon T1 - A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites JF - Theoretical and Applied Fracture Mechanics N2 - A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Amani, Jafar A1 - Bagherzadeh, Amir Saboor A1 - Rabczuk, Timon T1 - Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method JF - Mathematical Problems in Engineering N2 - Error estimate and adaptive refinement in Mixed Discrete Least Squares Meshless method KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Zhao, Jiyun A1 - Jiang, Jin-Wu A1 - Wang, L. A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - Coarse-grained potentials of single-walled carbon nanotubes JF - Journal of the Mechanics and Physics of Solids N2 - Coarse-grained potentials of single-walled carbon nanotubes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Areias, Pedro A1 - Rabczuk, Timon A1 - Barbosa, J.I. T1 - The extended unsymmetric frontal solution for multiple-point constraints JF - Engineering Computations N2 - The extended unsymmetric frontal solution for multiple-point constraints KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Vu-Bac, N. A1 - Lahmer, Tom A1 - Zhang, Yancheng A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs) JF - Composites Part B Engineering N2 - Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs) KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 SP - 80 EP - 95 ER - TY - JOUR A1 - Joshi, Suraj A1 - Hildebrand, Jörg A1 - Aloraier, Abdulkareem S. A1 - Rabczuk, Timon T1 - Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate JF - Computational Materials Science N2 - This paper presents several aspects of characterization of welding heat source parameters in Goldak’s double ellipsoidal model using Sysweld simulation of welding of two overlapping beads on a substrate steel plate. The overlap percentages ranged from 40% to 80% in increments of 10%. The new material properties of the fused metal were characterized using Weldware and their continuous cooling transformation curves. The convective and radiative heat transfer coefficients as well as the cooling time t8/5 were estimated using numerical formulations from relevant standards. The effects of the simulation geometry and mesh discretization were evaluated in terms of the factor F provided in Sysweld. Eventually, the parameters of Goldak’s double ellipsoidal heat source model were determined for the welding simulation of overlapping beads on the plate and the simulated bead geometry, extent of the molten pool and the HAZ were compared with the macrographs of cross-sections of the experimental weldments. The results showed excellent matching, thus verifying this methodology for determination of welding heat source parameters. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.commatsci.2012.11.029 SP - 559 EP - 565 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Jiang, Jin-Wu A1 - Jia, Yue A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - A theoretical analysis of cohesive energy between carbon nanotubes, graphene and substrates JF - Carbon N2 - Explicit solutions for the cohesive energy between carbon nanotubes, graphene and substrates are obtained through continuum modeling of the van der Waals interaction between them. The dependence of the cohesive energy on their size, spacing and crossing angles is analyzed. Checking against full atom molecular dynamics calculations and available experimental results shows that the continuum solution has high accuracy. The equilibrium distances between the nanotubes, graphene and substrates with minimum cohesive energy are also provided explicitly. The obtained analytical solution should be of great help for understanding the interaction between the nanostructures and substrates, and designing composites and nanoelectromechanical systems. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.carbon.2013.01.041 SP - 108 EP - 119 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Kou, Liangzhi A1 - Jiang, Jin-Wu A1 - Rabczuk, Timon T1 - Tension-induced phase transition of single-layer molybdenum disulphide (MoS2) at low temperatures JF - Nanotechnology N2 - Tension-induced phase transition of single-layer molybdenum disulphide (MoS2) at low temperatures KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1088/0957-4484/25/29/295701 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Rafiee, Roham A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Rabczuk, Timon T1 - Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling JF - Computational Materials Science N2 - Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 295 EP - 305 ER - TY - JOUR A1 - Zhang, Yancheng A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Mabrouki, Tarek A1 - Fontaine, Michaël A1 - Gong, Yadong A1 - Rabczuk, Timon T1 - Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation JF - Composites Part B Engineering N2 - Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 27 EP - 33 ER - TY - JOUR A1 - Nguyen-Thanh, Nhon A1 - Muthu, Jacob A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics JF - Computational Mechanics N2 - An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 369 EP - 385 ER - TY - JOUR A1 - Jiang, Jin-Wu A1 - Wang, Bing-Shen A1 - Rabczuk, Timon T1 - Phonon modes in single-walled molybdenum disulphide nanotubes: lattice dynamics calculation and molecular dynamics simulation JF - Nanotechnology N2 - Phonon modes in single-walled molybdenum disulphide nanotubes: lattice dynamics calculation and molecular dynamics simulation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Lu, Lixin A1 - Rabczuk, Timon T1 - Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines JF - The Journal of Chemical Physics N2 - Binding energy and mechanical stability of single- and multi-walled carbon nanotube serpentines KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1063/1.4878115 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Brighenti, Roberto A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Rabczuk, Timon T1 - Optimization of fiber distribution in fiber reinforced composite by using NURBS functions JF - Computational Materials Science N2 - Optimization of fiber distribution in fiber reinforced composite by using NURBS functions KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 463 EP - 473 ER - TY - JOUR A1 - Jamshidian, M. A1 - Rabczuk, Timon T1 - Phase field modelling of stressed grain growth: Analytical study and the effect of microstructural length scale JF - Journal of Computational Physics N2 - Phase field modelling of stressed grain growth: Analytical study and the effect of microstructural length scale KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 23 EP - 35 ER - TY - JOUR A1 - Thai, Chien H. A1 - Ferreira, A.J.M. A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon A1 - Nguyen-Xuan, Hung T1 - Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory JF - European Journal of Mechanics N2 - Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 89 EP - 108 ER - TY - JOUR A1 - Ghasemi, Hamid A1 - Brighenti, Roberto A1 - Zhuang, Xiaoying A1 - Muthu, Jacob A1 - Rabczuk, Timon T1 - Sequential reliability based optimization of fiber content and dispersion in fiber reinforced composite by using NURBS finite elements JF - Structural and Multidisciplinary Optimization N2 - Sequential reliability based optimization of fiber content and dispersion in fiber reinforced composite by using NURBS finite elements KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Chen, Lei A1 - Nguyen-Thanh, Nhon A1 - Nguyen-Xuan, Hung A1 - Rabczuk, Timon A1 - Bordas, Stéphane Pierre Alain A1 - Limbert, Georges T1 - Explicit finite deformation analysis of isogeometric membranes JF - Computer Methods in Applied Mechanics and Engineering N2 - Explicit finite deformation analysis of isogeometric membranes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 104 EP - 130 ER - TY - JOUR A1 - Nguyen-Thoi, T. A1 - Rabczuk, Timon A1 - Lam-Phat, T. A1 - Ho-Huu, V. A1 - Phung-Van, P. T1 - Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3) JF - Theoretical and Applied Fracture Mechanics N2 - Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3) KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Zhuang, Xiaoying A1 - Huang, Runqiu A1 - Rabczuk, Timon A1 - Liang, C. T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage JF - Mathematical Problems in Engineering N2 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Amiri, Fatemeh A1 - Millán, D. A1 - Shen, Y. A1 - Rabczuk, Timon A1 - Arroyo, M. T1 - Phase-field modeling of fracture in linear thin shells JF - Theoretical and Applied Fracture Mechanics N2 - Phase-field modeling of fracture in linear thin shells KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 102 EP - 109 ER - TY - JOUR A1 - Jiang, Jin-Wu A1 - Park, Harold S. A1 - Rabczuk, Timon T1 - MoS2 nanoresonators: intrinsically better than graphene? JF - Nanoscale N2 - MoS2 nanoresonators: intrinsically better than graphene? KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 3618 EP - 3625 ER - TY - JOUR A1 - König, Reinhard A1 - Knecht, Katja T1 - Comparing two evolutionary algorithm based methods for layout generation: Dense packing versus subdivision JF - Artificial Intelligence for Engineering Design, Analysis and Manufacturing N2 - We present and compare two evolutionary algorithm based methods for rectangular architectural layout generation: dense packing and subdivision algorithms.We analyze the characteristics of the two methods on the basis of three floor plan sce- narios. Our analyses include the speed with which solutions are generated, the reliability with which optimal solutions can be found, and the number of different solutions that can be found overall. In a following step, we discuss the methods with respect to their different user interaction capabilities. In addition, we show that each method has the capability to generate more complex L-shaped layouts. Finally,we conclude that neither of the methods is superior but that each of them is suitable for use in distinct application scenarios because of its different properties. KW - Architektur KW - Informatik KW - Kremlas Y1 - 2014 UR - http://www.journals.cambridge.org/abstract_S0890060414000237 N1 - Paper is only available from the journal home page. SP - 285 EP - 299 ER - TY - JOUR A1 - Areias, Pedro A1 - Pinto da Costa, A. A1 - Rabczuk, Timon A1 - Queiros de Melo, F. J. M. A1 - Dias-da-Costa, D. T1 - An alternative formulation for quasi-static frictional and cohesive contact problems JF - Computational Mechanics N2 - An alternative formulation for quasi-static frictional and cohesive contact problems KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 807 EP - 824 ER - TY - JOUR A1 - Budarapu, Pattabhi Ramaiah A1 - Gracie, Robert A1 - Yang, Shih-Wei A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Efficient Coarse Graining in Multiscale Modeling of Fracture JF - Theoretical and Applied Fracture Mechanics N2 - Efficient Coarse Graining in Multiscale Modeling of Fracture KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 126 EP - 143 ER - TY - JOUR A1 - Nguyen-Xuan, Hung A1 - Nguyen, Hiep Vinh A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon A1 - Duflot, Marc T1 - A cell-based smoothed finite element method for three dimensional solid structures JF - KSCE Journal of Civil Engineering N2 - This paper extends further the strain smoothing technique in finite elements to 8-noded hexahedral elements (CS-FEM-H8). The idea behind the present method is similar to the cell-based smoothed 4-noded quadrilateral finite elements (CS-FEM-Q4). In CSFEM, the smoothing domains are created based on elements, and each element can be further subdivided into 1 or several smoothing cells. It is observed that: 1) The CS-FEM using a single smoothing cell can produce higher stress accuracy, but insufficient rank and poor displacement accuracy; 2) The CS-FEM using several smoothing cells has proper rank, good displacement accuracy, but lower stress accuracy, especially for nearly incompressible and bending dominant problems. We therefore propose 1) an extension of strain smoothing to 8-noded hexahedral elements and 2) an alternative CS-FEM form, which associates the single smoothing cell issue with multi-smoothing cell one via a stabilization technique. Several numerical examples are provided to show the reliability and accuracy of the present formulation. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1007/s12205-012-1515-7 SP - 1230 EP - 1242 ER - TY - JOUR A1 - Budarapu, Pattabhi Ramaiah A1 - Gracie, Robert A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon T1 - An adaptive multiscale method for quasi-static crack growth JF - Computational Mechanics N2 - This paper proposes an adaptive atomistic- continuum numerical method for quasi-static crack growth. The phantom node method is used to model the crack in the continuum region and a molecular statics model is used near the crack tip. To ensure self-consistency in the bulk, a virtual atom cluster is used to model the material of the coarse scale. The coupling between the coarse scale and fine scale is realized through ghost atoms. The ghost atom positions are interpolated from the coarse scale solution and enforced as boundary conditions on the fine scale. The fine scale region is adaptively enlarged as the crack propagates and the region behind the crack tip is adaptively coarsened. An energy criterion is used to detect the crack tip location. The triangular lattice in the fine scale region corresponds to the lattice structure of the (111) plane of an FCC crystal. The Lennard-Jones potential is used to model the atom–atom interactions. The method is implemented in two dimensions. The results are compared to pure atomistic simulations; they show excellent agreement. KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1007/s00466-013-0952-6 SP - 1129 EP - 1148 ER - TY - JOUR A1 - Beex, L.A.A. A1 - Kerfriden, Pierre A1 - Rabczuk, Timon A1 - Bordas, Stéphane Pierre Alain T1 - Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation JF - Computer Methods in Applied Mechanics and Engineering N2 - Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Nguyen, V.P. A1 - Kerfriden, Pierre A1 - Bordas, Stéphane Pierre Alain A1 - Rabczuk, Timon T1 - Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm JF - Computer-Aided Design N2 - Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Talebi, Hossein A1 - Silani, Mohammad A1 - Bordas, Stéphane Pierre Alain A1 - Kerfriden, Pierre A1 - Rabczuk, Timon T1 - A computational library for multiscale modeling of material failure JF - Computational Mechanics N2 - A computational library for multiscale modeling of material failure KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Ilyani Akmar, A.B. A1 - Lahmer, Tom A1 - Bordas, Stéphane Pierre Alain A1 - Beex, L.A.A. A1 - Rabczuk, Timon T1 - Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties JF - Composite Structures N2 - Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.compstruct.2014.04.014 SP - 1 EP - 17 ER - TY - JOUR A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Rabczuk, Timon T1 - Detection of multiple flaws in piezoelectric structures using XFEM and level sets JF - Computer Methods in Applied Mechanics and Engineering N2 - Detection of multiple flaws in piezoelectric structures using XFEM and level sets KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 SP - 98 EP - 112 ER - TY - JOUR A1 - Areias, Pedro A1 - Rabczuk, Timon A1 - Camanho, P.P. T1 - Finite strain fracture of 2D problems with injected anisotropic softening elements JF - Theoretical and Applied Fracture Mechanics N2 - Finite strain fracture of 2D problems with injected anisotropic softening elements KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Vu-Bac, N. A1 - Lahmer, Tom A1 - Keitel, Holger A1 - Zhao, Jun-Hua A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations JF - Mechanics of Materials N2 - Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2014 SP - 70 EP - 84 ER - TY - JOUR A1 - Jia, Yue A1 - Anitescu, Cosmin A1 - Ghorashi, Seyed Shahram A1 - Rabczuk, Timon A1 - Dias-da-Costa, D. T1 - Extended Isogeometric Analysis for Material Interface Problems JF - Journal of Applied Mathematics N2 - Extended Isogeometric Analysis for Material Interface Problems KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 ER - TY - JOUR A1 - Luu, M. A1 - Martinez-Rodrigo, M.D. A1 - Zabel, Volkmar A1 - Könke, Carsten T1 - H∞ optimization of fluid viscous dampers for reducing vibrations of high-speed railway bridges JF - Journal of Sound and Vibration N2 - H∞ optimization of fluid viscous dampers for reducing vibrations of high-speed railway bridges KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2014 SP - 2421 EP - 2442 ER - TY - JOUR A1 - Knabe, Tina A1 - Datcheva, Maria A1 - Lahmer, Tom A1 - Cotecchia, F. A1 - Schanz, Tom T1 - Identification of constitutive parameters of soil using an optimization strategy and statistical analysis JF - Computers and Geotechnics N2 - Identification of constitutive parameters of soil using an optimization strategy and statistical analysis KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2013 SP - 143 EP - 157 ER - TY - JOUR A1 - Areias, Pedro A1 - Rabczuk, Timon T1 - Finite strain fracture of plates and shells with configurational forces and edge rotation JF - International Journal for Numerical Methods in Engineering N2 - Finite strain fracture of plates and shells with configurational forces and edge rotation KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Nanthakumar, S.S. A1 - Lahmer, Tom A1 - Rabczuk, Timon T1 - Detection of flaws in piezoelectric structures using extended FEM JF - International Journal for Numerical Methods in Engineering N2 - Detection of flaws in piezoelectric structures using extended FEM KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2013 SP - 373 EP - 389 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Wei, Ning A1 - Fan, Z. A1 - Jiang, Jin-Wu A1 - Rabczuk, Timon T1 - Mechanical properties of three types of carbon allotropes JF - Nanotechnology N2 - Mechanical properties of three types of carbon allotropes KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Phan-Dao, H. A1 - Nguyen-Xuan, Hung A1 - Thai-Hoang, C. A1 - Nguyen-Thoi, T. A1 - Rabczuk, Timon T1 - An edge-based smoothed finite element method for analysis of laminated composite plates JF - International Journal of Computational Methods N2 - An edge-based smoothed finite element method for analysis of laminated composite plates KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Jiang, Jin-Wu A1 - Wang, Bing-Shen A1 - Rabczuk, Timon T1 - Why twisting angles are diverse in graphene Moir’e patterns? JF - Journal of Applied Physics N2 - Why twisting angles are diverse in graphene Moir’e patterns? KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Jiang, Jin-Wu A1 - Rabczuk, Timon T1 - Mechanical Oscillation of Kinked Silicon Nanowires: a Natural Nanoscale Spring JF - Applied Physics Letters N2 - Mechanical Oscillation of Kinked Silicon Nanowires: a Natural Nanoscale Spring KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Nguyen-Thoi, T. A1 - Phung-Van, P. A1 - Rabczuk, Timon A1 - Nguyen-Xuan, Hung A1 - Le-Van, C. T1 - An application of the ES-FEM in solid domain for dynamic analysis of 2D fluid-solid interaction problems JF - International Journal of Computational Methods N2 - An application of the ES-FEM in solid domain for dynamic analysis of 2D fluid-solid interaction problems KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Le, C.V. A1 - Nguyen-Xuan, Hung A1 - Askes, H. A1 - Rabczuk, Timon A1 - Nguyen-Thoi, T. T1 - Computation of limit load using edge-based smoothed finite element method and second-order cone programming JF - International Journal of Computational Methods N2 - Computation of limit load using edge-based smoothed finite element method and second-order cone programming KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Schrader, Kai A1 - Könke, Carsten T1 - Distributed computing for the nonlinear analysis of multiphase composites JF - Advances in Engineering Software N2 - Distributed computing for the nonlinear analysis of multiphase composites KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 SP - 20 EP - 32 ER - TY - JOUR A1 - Zhao, Jun-Hua A1 - Wang, L. A1 - Jiang, Jin-Wu A1 - Wang, Z. A1 - Guo, Wanlin A1 - Rabczuk, Timon T1 - A comparative study of two molecular mechanics models based on harmonic potentials JF - Journal of Applied Physics N2 - A comparative study of two molecular mechanics models based on harmonic potentials KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Zhang, Yancheng A1 - Zhao, Jiyun A1 - Wei, Ning A1 - Jiang, Jin-Wu A1 - Rabczuk, Timon T1 - Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (SWNTs) on nanoengineering load transfer JF - Composites Part B: Engineering N2 - Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (SWNTs) on nanoengineering load transfer KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 SP - 1714 EP - 1721 ER - TY - JOUR A1 - Nguyen-Xuan, Hung A1 - Liu, G.R. A1 - Bordas, Stéphane Pierre Alain A1 - Natarajan, S. A1 - Rabczuk, Timon T1 - An adaptive singular ES-FEM for mechanics problems with singular field of arbitrary order JF - Computer Methods in Applied Mechanics and Engineering N2 - An adaptive singular ES-FEM for mechanics problems with singular field of arbitrary order KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 SP - 252 EP - 273 ER - TY - JOUR A1 - Talebi, Hossein A1 - Silani, Mohammad A1 - Bordas, Stéphane Pierre Alain A1 - Kerfriden, Pierre A1 - Rabczuk, Timon T1 - Molecular Dynamics/XFEM Coupling by a Three-Dimensional Extended Bridging Domain with Applications to Dynamic Brittle Fracture JF - International Journal for Multiscale Computational Engineering N2 - Molecular Dynamics/XFEM Coupling by a Three-Dimensional Extended Bridging Domain with Applications to Dynamic Brittle Fracture KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 ER - TY - JOUR A1 - Kerfriden, Pierre A1 - Goury, O. A1 - Rabczuk, Timon A1 - Bordas, Stéphane Pierre Alain T1 - A partitioned model order reduction approach to rationalise computational expenses in nonlinear fracture mechanics JF - Computer Methods in Applied Mechanics and Engineering N2 - A partitioned model order reduction approach to rationalise computational expenses in nonlinear fracture mechanics KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2013 SP - 169 EP - 188 ER -