TY - THES A1 - Neupert, Max T1 - Audiovisuelles Cut-Up N2 - This research identifies and examines the aesthetic phenomenon of extremely fast cut audiovisual media works. The term 'audiovisual cut-up' is proposed. The literary form of cut-up is described and compared to the characteristics of the reviewed phenomenon. A wide range of audiovisual works across different contexts is analyzed; all of which are sharing the same formal criteria of extremely short edits, including the authors contributions to the field. The technological tools facilitating the novel aesthetic are often crafted by the artists themselves because ready made solutions did not preexist. Audiovisual cut-ups are classified according to their contexts and mediums. Some observations are made regarding how audio and video essentially differ in their character, what the smallest perceivable unit is, and which role latencies and anticipation play in the perception of audiovisual media. Three main theses are made: 1. Audiovisual cut-up has the power to amplify small, previously hidden details and may be used to distort and deride the source material. 2. Technological advances have led to the development of audiovisual cut-up. 3. The aesthetic possibilities of cut-ups have become an integral part in the spectrum of possible audio-visual techniques. N2 - Diese Forschungsarbeit bezeichnet und analysiert ein ästhetisches Phänomen audiovisueller Arbeiten mit sehr schnellen Schnitten. Der Begriff „Audiovisuelles Cut-Up“ wird vorgeschlagen um dieses Phänomen zu bezeichnen. Verschiedenste audiovisuelle Arbeiten aus unterschiedlichen Kontexten werden analysiert, welche das formale Kriterium von extrem kurzen Einstellungen erfüllen – einschließlich der eigenen Forschungsbeiträge des Autors. Die Werkzeuge und Technologien, welche die neuartige Ästhetik ermöglichten werden vorgestellt. Oftmals wurden diese von den Künstlern selbst geschaffen, da fertige Lösungen nicht verfügbar waren. Audiovisuelle Cut-Ups werden nach Kontext und Medium systematisiert und verortet. Es schließen sich Beobachtungen an, in wie fern Audio und Video sich in ihrem Charakter unterscheiden, was die kleinste wahrnehmbare Einheit ist und welche Rolle Latenzen und Antizipation bei der Wahrnehmung von audiovisuellen Medien spielen. Drei Hauptthesen werden Aufgestellt: 1. Audiovisuelles Cut-Up hat die Kraft winzige, vormals überdeckte Details deutlich zu machen. Damit kann es das Quellmaterial verdichten aber auch den Inhalt manipulieren. 2. Technische Entwicklungen haben das audiovisuelle Cut-Up hervorgerufen. 3. Heute ist die Ästhetik als ein Stilmittel im Werkzeugkasten audiovisueller Gestaltung etabliert. KW - Medienkunst KW - Video KW - Experimentalfilm KW - Musikvideo KW - Werbung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230123-48968 ER - TY - THES A1 - Remus, Ricardo T1 - Ultraschallgestützte Betonherstellung. Konzept für eine ressourcenschonende Betonproduktion N2 - Aktuell findet aufgrund gesellschaftspolitischer Forderungen in vielen Industriezweigen ein Umdenken in Richtung Effizienz und Ökologie aber auch Digitalisierung und Industrie 4.0 statt. In dieser Hinsicht steht die Bauindustrie, im Vergleich zu Industrien wie IT, Automobil- oder Maschinenbau, noch am Anfang. Dabei sind die Potentiale zur Einsparung und Optimierung gerade in der Bauindustrie aufgrund der großen Mengen an zu verarbeiteten Materialien besonders hoch. Die internationale Ressourcen- und Klimadebatte führt verstärkt dazu, dass auch in der Zement- und Betonherstellung neue Konzepte erstellt und geprüft werden. Einerseits erfolgt intensive Forschung und Entwicklung im Bereich alternativer, klimafreundlicher Zemente. Andererseits werden auch auf Seiten der Betonherstellung innovative materialsparende Konzepte geprüft, wie die aktuelle Entwicklung von 3D-Druck mit Beton zeigt. Aufgrund der hohen Anforderungen an Konstruktion, Qualität und Langlebigkeit von Bauwerken, besitzen Betonfertigteile oftmals Vorteile gegenüber Ortbeton. Die hohe Oberflächenqualität und Dauerhaftigkeit aber auch die Gleichmäßigkeit und witterungsunabhängige Herstellung sind Merkmale, die im Zusammenhang mit Betonfertigteilen immer wieder erwähnt werden. Dabei ist es essenziell, dass auch der Betonherstellungsprozess im Fertigteilwerk kritisch hinterfragt wird, damit eine effizientere und nachhaltigere Produktion von Betonfertigteilen möglich wird. Bei der Herstellung von Betonteilen im Fertigteilwerk liegt ein besonderer Fokus auf der Optimierung der Frühfestigkeitsentwicklung. Hohe Frühfestigkeiten sind Voraussetzung für einen hochfrequenten Schalungszyklus, was Arbeiten im 2- bzw. 3-Schichtbetrieb ermöglicht. Oft werden zur Sicherstellung hoher Frühfestigkeiten hochreaktive Zemente in Kombination mit hohen Zementgehalten im Beton und/oder einer Wärmebehandlung eingesetzt. Unter dieser Prämisse ist eine ökologisch nachhaltige Betonproduktion mit verminderter CO2 Bilanz nicht möglich. In der vorliegenden Arbeit wird ein neues Verfahren zur Beschleunigung von Beton eingeführt. Hierbei werden die Bestandteile Zement und Wasser (Zementsuspension) mit Ultraschall vorbehandelt. Ausgangspunkt der Arbeit sind vorangegangene Untersuchungen zum Einfluss von Ultraschall auf die Hydration von Zement bzw. dessen Hauptbestandteil Tricalciumsilikat (C3S), die im Rahmen dieser Arbeit weiter vertieft werden. Darüber hinaus wird die Produktion von Beton mit Ultraschall im Technikumsmaßstab betrachtet. Die so erlangten Erfahrungen dienten dazu, das Ultraschall-Betonmischsystem weiterzuentwickeln und erstmalig zur industriellen Betonproduktion zu nutzen. In der vorliegenden Arbeit werden die Auswirkungen von Ultraschall auf die Hydratation von C3S zunächst weitergehend und grundlegend untersucht. Dies erfolgte mittels Messung der elektrischen Leitfähigkeit, Analyse der Ionenkonzentration (ICP-OES), Thermoanalyse, Messung der BET-Oberfläche sowie einer optischen Auswertung mittels Rasterelektronenmikroskopie (REM). Der Fokus liegt auf den ersten Stunden der Hydratation, also der Zeit, die durch die Ultraschallbehandlung am stärksten beeinflusst wird. In den Untersuchungen zeigt sich, dass die Beschleunigungswirkung von Ultraschall in verdünnten C3S Suspensionen (w/f-Wert = 50) stark von der Portlanditkonzentration der Lösung abhängt. Je niedriger die Portlanditkonzentration, desto größer ist die Beschleunigung. Ergänzende Untersuchungen der Ionenkonzentration der Lösung sowie Untersuchungen am hydratisierten C3S zeigen, dass unmittelbar nach der Beschallung (nach ca. 15 Minuten Hydratation) erste Hydratphasen vorliegen. Die durch Ultraschall initiiere Beschleunigung ist in den ersten 24 Stunden am stärksten und klingt dann sukzessive ab. Die Untersuchungen schließen mit Experimenten an C3S-Pasten (w/f-Wert = 0,50), die die Beobachtungen an den verdünnten Suspensionen bestätigen und infolge der Beschallung ein früheres Auftreten und einen größeren Anteil an C-S-H Phasen zeigen. Es wird gefolgert, dass die unmittelbar infolge von Ultraschall erzeugten C-S-H Phasen als Kristallisationskeim während der folgenden Reaktion dienen und daher Ultraschall als in-situ Keimbildungstechnik angesehen werden kann. Optisch zeigt sich, dass die C-S-H Phasen der beschallten Pasten nicht nur viel früher auftreten, sondern kleiner sind und fein verteilt über die Oberfläche des C3S vorliegen. Auch dieser Effekt wird als vorteilhaft für den sich anschließenden regulären Strukturaufbau angesehen. Im nächsten Schritt wird daher der Untersuchungsfokus vom Modellsystem mit C3S auf Portlandzement erweitert. Hierbei wird der Frage nachgegangen, wie sich eine Änderung der Zusammensetzung der Zementsuspension (w/z-Wert, Fließmittelmenge) beziehungsweise eine Änderung des Ultraschallenergieeintrag auf die Fließeigenschaften und das Erhärtungsverhalten auswirken. Um den Einfluss verschiedener Faktoren gleichzeitig zu betrachten, werden mit Hilfe von statistischen Versuchsplänen Modelle erstellt, die das Verhalten der einzelnen Faktoren beschreiben. Zur Beschreibung der Fließeigenschaften wurde das Setzfließ- und Ausbreitmaß von Zementsuspensionen herangezogen. Die Beschleunigung der Erhärtung wurde mit Hilfe der Ermittlung des Zeitpunkts des normalen Erstarrens der Zementsuspension bestimmt. Die Ergebnisse dieser Untersuchungen zeigen deutlich, dass die Fließeigenschaften und der Erstarrungsbeginn nicht linear mit steigendem Ultraschall-Energieeintrag verändert werden. Es zeigt sich, dass es besonders bei den Verarbeitungseigenschaften der Portlandzementsuspensionen zur Ausbildung eines spezifischen Energieeintrages kommt, bis zu welchem das Setzfließ- und das Ausbreitmaß erhöht werden. Bei Überschreiten dieses Punktes, der als kritischer Energieeintrag definiert wurde, nimmt das Setzfließ- und Ausbreitmaß wieder ab. Das Auftreten dieses Punktes ist im besonderen Maße abhängig vom w/z-Wert. Mit sinkendem w/z-Wert wird der Energieeintrag, der eine Verbesserung der Fließeigenschaften hervorruft, reduziert. Bei sehr niedrigen w/z-Werten (< 0,35), kann keine Verbesserung mehr beobachtet werden. Wird Fließmittel vor der Beschallung zur Zementsuspension zugegeben, können die Eigenschaften der Zementsuspension maßgeblich beeinflusst werden. In beschallten Suspensionen mit Fließmittel, konnte in Abhängigkeit des Energieeintrages die fließmittelbedingte Verzögerung des Erstarrungsbeginns deutlich reduziert werden. Weiterhin zeigt sich, dass der Energieeintrag, der notwendig ist um den Erstarrungsbeginn um einen festen Betrag zu reduzieren, bei Suspensionen mit Fließmittel deutlich reduziert ist. Auf Grundlage der Beobachtungen an Zementsuspensionen wird der Einfluss von Ultraschall in einen dispergierenden und einen beschleunigenden Effekt unterteilt. Bei hohen w/z-Werten dominiert der dispergierende Einfluss von Ultraschall und der Erstarrungsbeginn wird moderat verkürzt. Bei niedrigeren w/z-Werten der Zementsuspension, dominiert der beschleunigende Effekt wobei kein oder sogar ein negativer Einfluss auf die Verarbeitungseigenschaften beobachtet werden kann. Im nächsten Schritt werden die Untersuchungen auf den Betonmaßstab mit Hilfe einer Technikumsanlage erweitert und der Einfluss eines zweistufigen Mischens (also dem Herstellen einer Zementsuspension im ersten Schritt und dem darauffolgenden Vermischen mit der Gesteinskörnung im zweiten Schritt) mit Ultraschall auf die Frisch- und Festbetoneigenschaften betrachtet. Durch die Anlagentechnik, die mit der Beschallung größerer Mengen Zementsuspension einhergeht, kommen weitere Einflussfaktoren auf die Zementsuspension hinzu (z. B. Pumpgeschwindigkeit, Temperatur, Druck). Im Rahmen der Untersuchungen wurde eine Betonrezeptur mit und ohne Ultraschall hergestellt und die Frisch- und Festbetoneigenschaften verglichen. Darüber hinaus wurde ein umfangreiches Untersuchungsprogramm zur Ermittlung wesentlicher Dauerhaftigkeitsparameter durchgeführt. Aufbauend auf den Erfahrungen mit der Technikumsanlage wurde das Ultraschall-Vormischsystem in mehreren Stufen weiterentwickelt und abschließend in einem Betonwerk zur Betonproduktion verwendet. Die Untersuchungen am Beton zeigen eine deutliche Steigerung der Frühdruckfestigkeiten des Portlandzementbetons. Hierbei kann die zum Entschalen von Betonbauteilen notwendige Druckfestigkeit von 15 MPa deutlich früher erreicht werden. Das Ausbreitmaß der Betone (w/z-Wert = 0,47) wird infolge der Beschallung leicht reduziert, was sich mit den Ergebnissen aus den Untersuchungen an reinen Zementsuspensionen deckt. Bei Applikation eines Überdruckes in der Beschallkammer oder einer Kühlung der Suspension während der Beschallung, kann das Ausbreitmaß leicht gesteigert werden. Allerdings werden die hohen Frühdruckfestigkeiten der ungekühlten beziehungsweise drucklosen Variante nicht mehr erreicht. In den Untersuchungen kann gezeigt werden, dass das Potential durch die Ultraschall-Beschleunigung genutzt werden kann, um entweder die Festigkeitsklasse des Zementes leitungsneutral zu reduzieren (von CEM I 52,5 R auf CEM I 42,5 R) oder eine 4-stündige Wärmebehandlung vollständig zu substituieren. Die Dauerhaftigkeit der Betone wird dabei nicht negativ beeinflusst. In den Untersuchungen zum Sulfat-, Karbonatisierung-, Chlorideindring- oder Frost/Tauwiderstand kann weder ein positiver noch ein negativer Einfluss durch die Beschallung abgeleitet werden. Ebenso kann in einer Untersuchung zur Alkali-Kieselsäure-Reaktion kein negativer Einfluss durch die Ultraschallbehandlung beobachtet werden. In den darauf aufbauenden Untersuchungen wird die Anlagentechnik weiterentwickelt, um die Ultraschallbehandlung stärker an eine reale Betonproduktion anzupassen. In der ersten Iterationsstufe wird das in den Betonuntersuchungen verwendete Anlagenkonzept 1 modifiziert (von der In-line-Beschallung zur Batch-Beschallung) und als Analgenkonzept 2 für weitere Untersuchungen genutzt. Hierbei wird eine neue Betonrezeptur mit höherem w/z-Wert (0,52) verwendet, wobei die Druckfestigkeiten ebenfalls deutlich gesteigert werden können. Im Gegensatz zum ersten Beton, wird das Ausbreitmaß dieser Betonzusammensetzung gesteigert, was zur Reduktion von Fließmittel genutzt wird. Dies deckt sich ebenfalls mit den Beobachtungen an reinen Portlandzementsuspensionen, wo eine deutliche Verbesserung der Fließfähigkeit bei höheren w/z-Werten beschrieben wird. Für diese Betonrezeptur wird ein Vergleich mit einem kommerziell erhältlichen Erhärtungsbeschleuniger (synthetische C-S-H-Keime) angestellt. Hierbei zeigt sich, dass die Beschleunigungswirkung beider Technologien vergleichbar ist. Eine Kombination beider Technologien führt zu einer weiteren deutlichen Steigerung der Frühfestigkeiten, so dass hier von einem synergistischen Effekt ausgegangen werden kann. In der letzten Iterationsstufe, dem Anlagenkonzept 3, wird beschrieben, wie das Mischsystem im Rahmen einer universitären Ausgründung signifikant weiterentwickelt wird und erstmals in einem Betonwerk zur Betonproduktion verwendet wird. Bei den Überlegungen zur Weiterentwicklung des Ultraschall-Mischsystems wird der Fokus auf die Praktikabilität gelegt und gezeigt, dass das ultraschallgestütze Mischsystem die Druckfestigkeitsentwicklung auch im Werksmaßstab deutlich beschleunigen kann. Damit ist die Voraussetzung für eine ökologisch nachhaltige Optimierung eines Fertigteilbetons unter realen Produktionsbedingungen geschaffen worden. N2 - In the past years efficiency and sustainability as well as digitalization has come into focus for many different industries due to environmental and cultural changes. Compared to industries like IT, automotive or machine manufacturing, the building industry is still at the very beginning. Although, due to the large quantities of materials processed, the potential for savings and optimization is especially high in the construction industry. The international discussion on resources and climate is increasingly leading to new concepts being developed and tested in cement and concrete production. On one hand, intensive research and development is taking place in the area of alternative, climate-friendly cements. On the other hand, innovative concepts, like for example 3D-printing, are being tested in concrete production. Due to the construction, quality and durability requirements of buildings, precast concrete elements often have advantages compared to ready-mixed concrete. The high surface quality, durability, as well as the uniformity and weather-independent production are advantages that are repeatedly mentioned when speaking about precast concrete elements. It is necessary though, to discuss the concrete production process in the precast plant to make an efficient and sustainable production of precast concrete elements possible. Precast concrete producers mainly focus on optimizing early strength development. Fast hardening concrete is required for the demolding cycle, to enable shift work in production. Often, to ensure high early strengths, highly reactive cements are used in combination with high cement contents in the concrete and/or heat treatment. This contradicts a sustainable concrete concept. In this thesis, a new method for mixing concrete is discussed. Here, the reactive components of the concrete, cement and water, are pre-treated with ultrasound. Previous investigations on the influence of ultrasound on C3S and cement are the starting point of this work. These are further investigated in as part of this work. Furthermore, the production of concrete with ultrasound is investigated in a pilot scale. The gained experiences were used to further develop the ultrasonic concrete mixing system. Finally, the application of this technology in industrial concrete production is discussed. In this work, the effects of ultrasound on the hydration of C3S are further investigated. For this purpose, the hydration of sonicated suspensions is monitored by measuring the electrical conductivity, analysing the ion concentration by means of ICP-OES, thermal analysis, measuring the BET surface and an optical evaluation by means of scanning electron microscopy (SEM). The focus is on the first hours of hydration. During this time the hydration is most strongly influenced by the ultrasound treatment. The investigations show that the acceleration effect in diluted suspensions (w/s value = 50) is strongly dependent on the portlandite concentration of the solution. The lower the portlandite concentration, the greater the acceleration. Supplementary investigations of the ion concentration of the solution as well as investigations on hydrated C3S show, that first hydrate phases are observable immediately after sonication. The acceleration induced by ultrasound is strongest within the first 24 hours, gradually decreasing beyond this time. The investigations are concluded with experiments on C3S pastes (w/f value = 0.50), which confirm the observations on the diluted suspensions and show an earlier appearance and a greater number of C-S-H phases as a result of sonication. Visually, the C-S-H phases of the sonicated pastes do not only appear much earlier, they are also smaller and finely distributed over the surface of the C3S. In the next step, the focus of the investigation is extended from the model system with C3S to Portland cement. The question to be discussed is how different compositions of the cement suspension (w/c-ratio, amount of superplasticiser) or a change in the ultrasonic energy input affects the flow properties and the hardening behaviour. To consider the influence of different factors simultaneously, models are developed with design of experiments (DoE), which describes the behavior of the individual factors. To describe the workability, the slump of cement suspensions was determined. The acceleration of setting was measured by determining the time of normal setting of the cement suspension. The results of these investigations clearly show that the flow properties and the set time do not change linearly with increasing energy input. It is shown that there is a threshold of the specific energy input up to which the slump is increased. When this point, which is defined as the critical energy input, is exceeded, the slump decreased. The occurrence of this point is particularly dependent on the w/c ratio. As the w/c ratio decreases, the energy input that causes an improvement in the flow properties is reduced. At very low w/c-values (< 0.35), no improvement can be observed. If superplasticiser is added to the cement suspension before sonication, the properties of the cement suspension can be significantly influenced. In sonicated suspensions with superplasticiser, the superplasticiser-induced delay of the set time could be significantly reduced depending on the energy input. Furthermore, the energy input required to reduce the time of solidification is significantly reduced in suspensions with superplasticiser. Based on the observations on cement suspensions, the influence of ultrasound is divided into a dispersing and an accelerating effect. At high w/c-values, the dispersing effect of ultrasound dominates, and the set time is moderately decreased. At lower w/c-values of the cement suspension, the accelerating effect dominates, whereas no or even a negative influence on the workability can be observed. In the next step, the investigations will be extended to the concrete scale with the help of a laboratory plant. Here, the influence of two-stage mixing with ultrasound on the fresh and hardened concrete properties will be discussed. Due to the system set up, which goes hand in hand with the sonication of larger quantities of cement suspension, added further influencing factors to the cement suspension (e.g., Pumping speed, temperature, pressure). As part of the investigations, a concrete composition was produced with as well as without ultrasonic premixing and the fresh and hardened concrete properties were compared. In addition, a comprehensive investigation programme was undertaken to determine essential durability parameters. Based on the experiences with the laboratory device, the ultrasonic premixing system was further developed in several stages and finally used in an industrial concrete plant for concrete production. The results of the concrete investigations examine a significant increase in the early compressive strengths of Portland cement concrete. Here, the compressive strength of 15 MPa, which is required for stripping of concrete components, can be achieved significantly earlier. The slump of the concretes (w/c-value = 0.47) is slightly decreased as a result of sonication, which is in accordance with the results of the investigations on cement suspensions. If an overpressure is applied in the sonication chamber or the suspension is cooled during sonication, the slump can be slightly increased. However, the high early compressive strengths of the non-cooled or non-pressured concrete are no longer achieved. the investigations show that the acceleration potential can be used to either reduce the strength class of the cement without performance loss (e. g. from CEM I 52.5 R to CEM I 42.5 R) or to completely substitute a 4-hour heat treatment. The durability of the concrete is not affected. In the investigations on sulphate, carbonation, chloride penetration or freeze/thaw resistance, neither a positive nor a negative influence can be derived from sonication. Likewise, in an investigation on alkali-silica reaction, no negative influence can be observed due to ultrasonic premixing. Based on these investigations, the ultrasound mixing technology will be further developed in order to decrease the gap between laboratory and industrial production. In the first iteration, the system concept 1 used in the concrete investigations will be modified and used subsequently as system concept 2 for further tests. Here, a new concrete composition with a higher w/c ratio (0.52) is used, through which the compressive strengths can also be significantly increased. In contrast to the first concrete, the slump of this concrete composition is increased, which is used to reduce superplasticiser. This is also in accordance with the observations on Portland cement suspensions, where a clear improvement of the flowability at higher w/c-values is described. For this concrete formulation, a comparison is made with a commercially available hardening accelerator (synthetic C-S-H-seeds). The results show that the acceleration effect of both technologies is comparable. A combination of both technologies leads to a further significant increase in early strength, so a synergistic effect can be assumed. The last iteration stage, the system concept 3, describes how the mixing system is significantly developed within a university spin-off and is used for the first time in a concrete plant for concrete production. The conceptual design of the ultrasonic mixing system for industrial application, focusses on the practicability.it is shown that the mixing system can significantly accelerate the compressive strength development, even in an industrial scale. These results paves the way for optimising precast concrete in terms of sustainability. KW - Beton KW - Beton KW - Nachhaltigkeit KW - Ultraschall Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48919 ER - TY - THES A1 - Held, Tobias T1 - Einblick: Gestalterische Potentiale und Perspektiven der Videotelefonie im Kontext von Nähe und Distanz. Eine praxis-basierte, (re-)kontextualisierende und diskursanalytische Studie. N2 - Inhaltlich beschäftigt sich die Arbeit, die im Rahmen des Promotionsstudiengangs Kunst und Gestaltung an der Bauhaus-Universität entstand, mit der Erforschung sozio-interaktiver Potentiale der Videotelefonie im Kontext von Nähe und Verbundenheit mit Fokus auf Eigenbild, Embodiment sowie den Rederechtswechsel. Die Videotelefonie als Kommunikationsform hat sich – und darauf deuten die Erfahrungen der Co- vid-19-Pandemie hin – im lebensweltlichen Alltag der Menschen etabliert und wird dort in naher Zukunft nicht mehr wegzudenken sein. Auf Basis ihrer Möglichkeiten und Errungenschaften ist es inzwischen Realität und Lebenswirklichkeit, dass die Kommunikation sowohl im privaten als auch im geschäftlichen Kontext mittels verschiedenster Kanäle stattfindet. Der Videotelefonie kommt hierbei als solche nicht nur eine tragende Funktion, sondern auch eine herausragende Rolle bei der vermeintlichen Reproduktion der Face-to-Face-Kommunikation im digitalen Raum zu und wird wie selbstverständlich zum zwischenmenschlichen Austausch genutzt. Just an diesem Punkt knüpft die Forschungsarbeit an. Zentral stand dabei das Vorhaben einer dezidierte Untersuchung des Forschungsgegenstandes Videotelefonie, sowohl aus Kultur- als auch Technikhistorischer, aber auch Medien-, Wahrnehmungs- wie Kommunikations- theoretischer Perspektive, indem analytische und phänosemiotische Perspektiven miteinander in Beziehung gesetzt werden (z.B. Wahrnehmungsbedingungen, Interaktionsmerkmale, realisierte Kommunikationsprozesse etc.). Damit verbundenes, wünschenswertes Ziel war es, eine möglichst zeitgemäße wie relevante Forschungsfrage zu adressieren, die neben den kulturellen Technisierungs- und Mediatisierungstendenzen in institutionellen und privaten Milieus ebenfalls eine conditio sine qua non der pandemischen (Massen-)Kommunikation entwirft. Die Arbeit ist damit vor allem im Bereich des Produkt- und Interactiondesigns zu verorten. Darüber hinaus hatte sie das Ziel der Darlegung und Begründung der Videotelefonie als eigenständige Kommunikationsform, welche durch eigene, kommunikative Besonderheiten, die sich in ihrer jeweiligen Ingebrauchnahme sowie durch spezielle Wahrnehmungsbedingungen äußern, und die die Videotelefonie als »Rederechtswechselmedium« avant la lettre konsolidieren, gekennzeichnet ist. Dabei sollte der Beweis erbracht werden, dass die Videotelefonie nicht als Schwundstufe einer Kommunikation Face-to-Face, sondern als ein eigenständiges Mediatisierungs- und Kommunikationsereignis zu verstehen sei. Und eben nicht als eine beliebige – sich linear vom Telefon ausgehende – entwickelte Form der audio-visuellen Fernkommunikation darstellt, sondern die gestalterische (Bewegtbild-)Technizität ein eigenständiges Funktionsmaß offeriert, welches wiederum ein innovatives Kommunikationsmilieu im Kontext einer Rederechtswechsel-Medialität stabilisiert. KW - Videotelefonie KW - Designforschung KW - Medienforschung KW - Videokonferenz KW - videochat KW - videocall KW - videoconference Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230111-48867 ER - TY - THES A1 - Müller, Matthias T1 - Salt-frost Attack on Concrete - New Findings regarding the Damage Mechanism N2 - The reduction of the cement clinker content is an important prerequisite for the improvement of the CO2-footprint of concrete. Nevertheless, the durability of such concretes must be sufficient to guarantee a satisfactory service life of structures. Salt frost scaling resistance is a critical factor in this regard, as it is often diminished at increased clinker substitution rates. Furthermore, only insufficient long-term experience for such concretes exists. A high salt frost scaling resistance thus cannot be achieved by applying only descriptive criteria, such as the concrete composition. It is therefore to be expected, that in the long term a performance based service life prediction will replace the descriptive concept. To achieve the important goal of clinker reduction for concretes also in cold and temperate climates it is important to understand the underlying mechanisms for salt frost scaling. However, conflicting damage theories dominate the current State of the Art. It was consequently derived as the goal of this thesis to evaluate existing damage theories and to examine them experimentally. It was found that only two theories have the potential to describe the salt frost attack satisfactorily – the glue spall theory and the cryogenic suction theory. The glue spall theory attributes the surface scaling to the interaction of an external ice layer with the concrete surface. Only when moderate amounts of deicing salt are present in the test solution the resulting mechanical properties of the ice can cause scaling. However, the results in this thesis indicate that severe scaling also occurs at deicing salt levels, at which the ice is much too soft to damage concrete. Thus, the inability of the glue spall theory to account for all aspects of salt frost scaling was shown. The cryogenic suction theory is based on the eutectic behavior of salt solutions, which consist of two phases – water ice and liquid brine – between the freezing point and the eutectic temperature. The liquid brine acts as an additional moisture reservoir, which facilitates the growth of ice lenses in the surface layer of the concrete. The experiments in this thesis confirmed, that the ice formation in hardened cement paste increases due to the suction of brine at sub-zero temperatures. The extent of additional ice formation was influenced mainly by the porosity and by the chloride binding capacity of the hardened cement paste. Consequently, the cryogenic suction theory plausibly describes the actual generation of scaling, but it has to be expanded by some crucial aspects to represent the salt frost scaling attack completely. The most important aspect is the intensive saturation process, which is ascribed to the so-called micro ice lens pump. Therefore a combined damage theory was proposed, which considers multiple saturation processes. Important aspects of this combined theory were confirmed experimentally. As a result, the combined damage theory constitutes a good basis to understand the salt frost scaling attack on concrete on a fundamental level. Furthermore, a new approach was identified, to account for the reduced salt frost scaling resistance of concretes with reduced clinker content. T2 - Frost-Tausalz-Angriff auf Beton - Neue Erkenntnisse zum Schadensmechnismus KW - Beton KW - Frost KW - Concrete KW - Salt frost attack KW - Damage mechanism KW - Glue Spall KW - Cryogenic Suction Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230103-48681 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/4502 N1 - Englische Fassung meiner deutschsprachigen Dissertation mit dem Titel "Frost-Tausalz-Angriff auf Beton - Neue Erkenntnisse zum Schadensmechnismus". ER - TY - THES A1 - Mojahedin, Arvin T1 - Analysis of Functionally Graded Porous Materials Using Deep Energy Method and Analytical Solution N2 - Porous materials are an emerging branch of engineering materials that are composed of two elements: One element is a solid (matrix), and the other element is either liquid or gas. Pores can be distributed within the solid matrix of porous materials with different shapes and sizes. In addition, porous materials are lightweight, and flexible, and have higher resistance to crack propagation and specific thermal, mechanical, and magnetic properties. These properties are necessary for manufacturing engineering structures such as beams and other engineering structures. These materials are widely used in solid mechanics and are considered a good replacement for classical materials by many researchers recently. Producing lightweight materials has been developed because of the possibility of exploiting the properties of these materials. Various types of porous material are generated naturally or artificially for a specific application such as bones and foams. Like functionally graded materials, pore distribution patterns can be uniform or non-uniform. Biot’s theory is a well-developed theory to study the behavior of poroelastic materials which investigates the interaction between fluid and solid phases of a fluid-saturated porous medium. Functionally graded porous materials (FGPM) are widely used in modern industries, such as aerospace, automotive, and biomechanics. These advanced materials have some specific properties compared to materials with a classic structure. They are extremely light, while they have specific strength in mechanical and high-temperature environments. FGPMs are characterized by a gradual variation of material parameters over the volume. Although these materials can be made naturally, it is possible to design and manufacture them for a specific application. Therefore, many studies have been done to analyze the mechanical and thermal properties of FGPM structures, especially beams. Biot was the pioneer in formulating the linear elasticity and thermoelasticity equations of porous material. Since then, Biot's formulation has been developed in continuum mechanics which is named poroelasticity. There are obstacles to analyzing the behavior of these materials accurately like the shape of the pores, the distribution of pores in the material, and the behavior of the fluid (or gas) that saturated pores. Indeed, most of the engineering structures made of FGPM have nonlinear governing equations. Therefore, it is difficult to study engineering structures by solving these complicated equations. The main purpose of this dissertation is to analyze porous materials in engineering structures. For this purpose, the complex equations of porous materials have been simplified and applied to engineering problems so that the effect of all parameters of porous materials on the behavior of engineering structure has been investigated. The effect of important parameters of porous materials on beam behavior including pores compressibility, porosity distribution, thermal expansion of fluid within pores, the interaction of stresses between pores and material matrix due to temperature increase, effects of pore size, material thickness, and saturated pores with fluid and unsaturated conditions are investigated. Two methods, the deep energy method, and the exact solution have been used to reduce the problem hypotheses, increase accuracy, increase processing speed, and apply these in engineering structures. In both methods, they are analyzed nonlinear and complex equations of porous materials. To increase the accuracy of analysis and study of the effect of shear forces, Timoshenko and Reddy's beam theories have been used. Also, neural networks such as residual and fully connected networks are designed to have high accuracy and less processing time than other computational methods. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,12 KW - Poröser Stoff KW - Analytische Lösung KW - Porous Materials KW - Deep Energy Method KW - Analytical Solution KW - Functionally Graded Materials Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221220-48674 ER - TY - THES A1 - Legatiuk, Anastasiia T1 - Discrete potential and function theories on a rectangular lattice and their applications N2 - The growing complexity of modern engineering problems necessitates development of advanced numerical methods. In particular, methods working directly with discrete structures, and thus, representing exactly some important properties of the solution on a lattice and not just approximating the continuous properties, become more and more popular nowadays. Among others, discrete potential theory and discrete function theory provide a variety of methods, which are discrete counterparts of the classical continuous methods for solving boundary value problems. A lot of results related to the discrete potential and function theories have been presented in recent years. However, these results are related to the discrete theories constructed on square lattices, and, thus, limiting their practical applicability and potentially leading to higher computational costs while discretising realistic domains. This thesis presents an extension of the discrete potential theory and discrete function theory to rectangular lattices. As usual in the discrete theories, construction of discrete operators is strongly influenced by a definition of discrete geometric setting. For providing consistent constructions throughout the whole thesis, a detailed discussion on the discrete geometric setting is presented in the beginning. After that, the discrete fundamental solution of the discrete Laplace operator on a rectangular lattice, which is the core of the discrete potential theory, its numerical analysis, and practical calculations are presented. By using the discrete fundamental solution of the discrete Laplace operator on a rectangular lattice, the discrete potential theory is then constructed for interior and exterior settings. Several discrete interior and exterior boundary value problems are then solved. Moreover, discrete transmission problems are introduced and several numerical examples of these problems are discussed. Finally, a discrete fundamental solution of the discrete Cauchy-Riemann operator on a rectangular lattice is constructed, and basics of the discrete function theory on a rectangular lattice are provided. This work indicates that the discrete theories provide solution methods with very good numerical properties to tackle various boundary value problems, as well as transmission problems coupling interior and exterior problems. The results presented in this thesis provide a basis for further development of discrete theories on irregular lattices. KW - Diskrete Funktionentheorie KW - Diskrete Potentialtheorie KW - Diskrete Fundamentallösung KW - Transmissionsaufgabe KW - Discrete potential theory KW - Discrete function theory KW - Transmission problem KW - Discrete fundamental solution Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221220-48654 ER - TY - THES A1 - Hanna, John T1 - Computational Fracture Modeling and Design of Encapsulation-Based Self-Healing Concrete Using XFEM and Cohesive Surface Technique N2 - Encapsulation-based self-healing concrete (SHC) is the most promising technique for providing a self-healing mechanism to concrete. This is due to its capacity to heal fractures effectively without human interventions, extending the operational life and lowering maintenance costs. The healing mechanism is created by embedding capsules containing the healing agent inside the concrete. The healing agent will be released once the capsules are fractured and the healing occurs in the vicinity of the damaged part. The healing efficiency of the SHC is still not clear and depends on several factors; in the case of microcapsules SHC the fracture of microcapsules is the most important aspect to release the healing agents and hence heal the cracks. This study contributes to verifying the healing efficiency of SHC and the fracture mechanism of the microcapsules. Extended finite element method (XFEM) is a flexible, and powerful discrete crack method that allows crack propagation without the requirement for re-meshing and has been shown high accuracy for modeling fracture in concrete. In this thesis, a computational fracture modeling approach of Encapsulation-based SHC is proposed based on the XFEM and cohesive surface technique (CS) to study the healing efficiency and the potential of fracture and debonding of the microcapsules or the solidified healing agents from the concrete matrix as well. The concrete matrix and a microcapsule shell both are modeled by the XFEM and combined together by CS. The effects of the healed-crack length, the interfacial fracture properties, and microcapsule size on the load carrying capability and fracture pattern of the SHC have been studied. The obtained results are compared to those obtained from the zero thickness cohesive element approach to demonstrate the significant accuracy and the validity of the proposed simulation. The present fracture simulation is developed to study the influence of the capsular clustering on the fracture mechanism by varying the contact surface area of the CS between the microcapsule shell and the concrete matrix. The proposed fracture simulation is expanded to 3D simulations to validate the 2D computational simulations and to estimate the accuracy difference ratio between 2D and 3D simulations. In addition, a proposed design method is developed to design the size of the microcapsules consideration of a sufficient volume of healing agent to heal the expected crack width. This method is based on the configuration of the unit cell (UC), Representative Volume Element (RVE), Periodic Boundary Conditions (PBC), and associated them to the volume fraction (Vf) and the crack width as variables. The proposed microcapsule design is verified through computational fracture simulations. KW - Beton KW - Bruchverhalten KW - Finite-Elemente-Methode KW - Self-healing concrete KW - Computational fracture modeling KW - Capsular clustering; Design of microcapsules KW - XFEM KW - Cohesive surface technique KW - Mikrokapsel KW - Selbstheilendem Beton KW - Computermodellierung des Bruchverhaltens KW - Entwurf von Mikrokapseln KW - Kapselclustern KW - Erweiterte Finite-Elemente-Methode KW - Kohäsionsflächenverfahren Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221124-47467 ER - TY - THES A1 - Jenabidehkordi, Ali T1 - An Efficient Adaptive PD Formulation for Complex Microstructures N2 - The computational costs of newly developed numerical simulation play a critical role in their acceptance within both academic use and industrial employment. Normally, the refinement of a method in the area of interest reduces the computational cost. This is unfortunately not true for most nonlocal simulation, since refinement typically increases the size of the material point neighborhood. Reducing the discretization size while keep- ing the neighborhood size will often require extra consideration. Peridy- namic (PD) is a newly developed numerical method with nonlocal nature. Its straightforward integral form equation of motion allows simulating dy- namic problems without any extra consideration required. The formation of crack and its propagation is known as natural to peridynamic. This means that discontinuity is a result of the simulation and does not demand any post-processing. As with other nonlocal methods, PD is considered an expensive method. The refinement of the nodal spacing while keeping the neighborhood size (i.e., horizon radius) constant, emerges to several nonphysical phenomena. This research aims to reduce the peridynamic computational and imple- mentation costs. A novel refinement approach is introduced. The pro- posed approach takes advantage of the PD flexibility in choosing the shape of the horizon by introducing multiple domains (with no intersections) to the nodes of the refinement zone. It will be shown that no ghost forces will be created when changing the horizon sizes in both subdomains. The approach is applied to both bond-based and state-based peridynamic and verified for a simple wave propagation refinement problem illustrating the efficiency of the method. Further development of the method for higher dimensions proves to have a direct relationship with the mesh sensitivity of the PD. A method for solving the mesh sensitivity of the PD is intro- duced. The application of the method will be examined by solving a crack propagation problem similar to those reported in the literature. New software architecture is proposed considering both academic and in- dustrial use. The available simulation tools for employing PD will be collected, and their advantages and drawbacks will be addressed. The challenges of implementing any node base nonlocal methods while max- imizing the software flexibility to further development and modification will be discussed and addressed. A software named Relation-Based Sim- ulator (RBS) is developed for examining the proposed architecture. The exceptional capabilities of RBS will be explored by simulating three dis- tinguished models. RBS is available publicly and open to further develop- ment. The industrial acceptance of the RBS will be tested by targeting its performance on one Mac and two Linux distributions. KW - Peridynamik KW - Numerical Simulations KW - Peridynamics KW - Numerical Simulations Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221124-47422 ER - TY - THES A1 - Jenabidehkordi, Ali T1 - An efficient adaptive PD formulation for complex microstructures N2 - The computational costs of newly developed numerical simulation play a critical role in their acceptance within both academic use and industrial employment. Normally, the refinement of a method in the area of interest reduces the computational cost. This is unfortunately not true for most nonlocal simulation, since refinement typically increases the size of the material point neighborhood. Reducing the discretization size while keep- ing the neighborhood size will often require extra consideration. Peridynamic (PD) is a newly developed numerical method with nonlocal nature. Its straightforward integral form equation of motion allows simulating dynamic problems without any extra consideration required. The formation of crack and its propagation is known as natural to peridynamic. This means that discontinuity is a result of the simulation and does not demand any post-processing. As with other nonlocal methods, PD is considered an expensive method. The refinement of the nodal spacing while keeping the neighborhood size (i.e., horizon radius) constant, emerges to several nonphysical phenomena. This research aims to reduce the peridynamic computational and imple- mentation costs. A novel refinement approach is introduced. The pro- posed approach takes advantage of the PD flexibility in choosing the shape of the horizon by introducing multiple domains (with no intersections) to the nodes of the refinement zone. It will be shown that no ghost forces will be created when changing the horizon sizes in both subdomains. The approach is applied to both bond-based and state-based peridynamic and verified for a simple wave propagation refinement problem illustrating the efficiency of the method. Further development of the method for higher dimensions proves to have a direct relationship with the mesh sensitivity of the PD. A method for solving the mesh sensitivity of the PD is intro- duced. The application of the method will be examined by solving a crack propagation problem similar to those reported in the literature. New software architecture is proposed considering both academic and in- dustrial use. The available simulation tools for employing PD will be collected, and their advantages and drawbacks will be addressed. The challenges of implementing any node base nonlocal methods while max- imizing the software flexibility to further development and modification will be discussed and addressed. A software named Relation-Based Sim- ulator (RBS) is developed for examining the proposed architecture. The exceptional capabilities of RBS will be explored by simulating three distinguished models. RBS is available publicly and open to further develop- ment. The industrial acceptance of the RBS will be tested by targeting its performance on one Mac and two Linux distributions. KW - Peridynamik KW - Peridynamics KW - Numerical Simulation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221116-47389 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/4742 ER - TY - THES A1 - Zacharias, Christin T1 - Numerical Simulation Models for Thermoelastic Damping Effects N2 - Finite Element Simulations of dynamically excited structures are mainly influenced by the mass, stiffness, and damping properties of the system, as well as external loads. The prediction quality of dynamic simulations of vibration-sensitive components depends significantly on the use of appropriate damping models. Damping phenomena have a decisive influence on the vibration amplitude and the frequencies of the vibrating structure. However, developing realistic damping models is challenging due to the multiple sources that cause energy dissipation, such as material damping, different types of friction, or various interactions with the environment. This thesis focuses on thermoelastic damping, which is the main cause of material damping in homogeneous materials. The effect is caused by temperature changes due to mechanical strains. In vibrating structures, temperature gradients arise in adjacent tension and compression areas. Depending on the vibration frequency, they result in heat flows, leading to increased entropy and the irreversible transformation of mechanical energy into thermal energy. The central objective of this thesis is the development of efficient simulation methods to incorporate thermoelastic damping in finite element analyses based on modal superposition. The thermoelastic loss factor is derived from the structure's mechanical mode shapes and eigenfrequencies. In subsequent analyses that are performed in the time and frequency domain, it is applied as modal damping. Two approaches are developed to determine the thermoelastic loss in thin-walled plate structures, as well as three-dimensional solid structures. The realistic representation of the dissipation effects is verified by comparing the simulation results with experimentally determined data. Therefore, an experimental setup is developed to measure material damping, excluding other sources of energy dissipation. The three-dimensional solid approach is based on the determination of the generated entropy and therefore the generated heat per vibration cycle, which is a measure for thermoelastic loss in relation to the total strain energy. For thin plate structures, the amount of bending energy in a modal deformation is calculated and summarized in the so-called Modal Bending Factor (MBF). The highest amount of thermoelastic loss occurs in the state of pure bending. Therefore, the MBF enables a quantitative classification of the mode shapes concerning the thermoelastic damping potential. The results of the developed simulations are in good agreement with the experimental results and are appropriate to predict thermoelastic loss factors. Both approaches are based on modal superposition with the advantage of a high computational efficiency. Overall, the modeling of thermoelastic damping represents an important component in a comprehensive damping model, which is necessary to perform realistic simulations of vibration processes. N2 - Die Finite-Elemente Simulation von dynamisch angeregten Strukturen wird im Wesentlich durch die Steifigkeits-, Massen- und Dämpfungseigenschaften des Systems sowie durch die äußere Belastung bestimmt. Die Vorhersagequalität von dynamischen Simulationen schwingungsanfälliger Bauteile hängt wesentlich von der Verwendung geeigneter Dämpfungsmodelle ab. Dämpfungsphänomene haben einen wesentlichen Einfluss auf die Schwingungsamplitude, die Frequenz und teilweise sogar die Existenz von Vibrationen. Allerdings ist die Entwicklung von realitätsnahen Dämpfungsmodellen oft schwierig, da eine Vielzahl von physikalischen Effekten zur Energiedissipation während eines Schwingungsvorgangs führt. Beispiele hierfür sind die Materialdämpfung, verschiedene Formen der Reibung sowie vielfältige Wechselwirkungen mit dem umgebenden Medium. Diese Dissertation befasst sich mit thermoelastischer Dämpfung, die in homogenen Materialien die dominante Ursache der Materialdämpfung darstellt. Der thermoelastische Effekt wird ausgelöst durch eine Temperaturänderung aufgrund mechanischer Spannungen. In der schwingenden Struktur entstehen während der Deformation Temperaturgradienten zwischen benachbarten Regionen unter Zug- und Druckbelastung. In Abhängigkeit von der Vibrationsfrequenz führen diese zu Wärmeströmen und irreversibler Umwandlung mechanischer in thermische Energie. Die Zielstellung dieser Arbeit besteht in der Entwicklung recheneffizienter Simulationsmethoden, um thermoelastische Dämpfung in zeitabhängigen Finite-Elemente Analysen, die auf modaler Superposition beruhen, zu integrieren. Der thermoelastische Verlustfaktor wird auf der Grundlage der mechanischen Eigenformen und -frequenzen bestimmt. In nachfolgenden Analysen im Zeit- und Frequenzbereich wird er als modaler Dämpfungsgrad verwendet. Zwei Ansätze werden entwickelt, um den thermoelastischen Verlustfaktor in dünn-wandigen Plattenstrukturen, sowie in dreidimensionalen Volumenbauteilen zu simulieren. Die realitätsnahe Vorhersage der Energiedissipation wird durch die Verifizierung an experimentellen Daten bestätigt. Dafür wird ein Versuchsaufbau entwickelt, der eine Messung von Materialdämpfung unter Ausschluss anderer Dissipationsquellen ermöglicht. Für den Fall der Volumenbauteile wird ein Ansatz verwendet, der auf der Berechnung der Entropieänderung und damit der erzeugte Wärmeenergie während eines Schwingungszyklus beruht. Im Verhältnis zur Formänderungsenergie ist dies ein Maß für die thermoelastische Dämpfung. Für dünne Plattenstrukturen wird der Anteil an Biegeenergie in der Eigenform bestimmt und im sogenannten modalen Biegefaktor (MBF) zusammengefasst. Der maximale Grad an thermoelastischer Dämpfung kann im Zustand reiner Biegung auftreten, sodass der MBF eine quantitative Klassifikation der Eigenformen hinsichtlich ihres thermoelastischen Dämpfungspotentials zulässt. Die Ergebnisse der entwickelten Simulationsmethoden stimmen sehr gut mit den experimentellen Daten überein und sind geeignet, um thermoelastische Dämpfungsgrade vorherzusagen. Beide Ansätze basieren auf modaler Superposition und ermöglichen damit zeitabhängige Simulationen mit einer hohen Recheneffizienz. Insgesamt stellt die Modellierung der thermoelastischen Dämpfung einen Baustein in einem umfassenden Dämpfungsmodell dar, welches zur realitätsnahen Simulation von Schwingungsvorgängen notwendig ist. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,8 KW - Werkstoffdämpfung KW - Finite-Elemente-Methode KW - Strukturdynamik KW - Thermoelastic damping KW - modal damping KW - decay experiments KW - energy dissipation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221116-47352 ER - TY - THES A1 - Zhang, Yongzheng T1 - A Nonlocal Operator Method for Quasi-static and Dynamic Fracture Modeling N2 - Material failure can be tackled by so-called nonlocal models, which introduce an intrinsic length scale into the formulation and, in the case of material failure, restore the well-posedness of the underlying boundary value problem or initial boundary value problem. Among nonlocal models, peridynamics (PD) has attracted a lot of attention as it allows the natural transition from continuum to discontinue and thus allows modeling of discrete cracks without the need to describe and track the crack topology, which has been a major obstacle in traditional discrete crack approaches. This is achieved by replacing the divergence of the Cauchy stress tensor through an integral over so-called bond forces, which account for the interaction of particles. A quasi-continuum approach is then used to calibrate the material parameters of the bond forces, i.e., equating the PD energy with the energy of a continuum. One major issue for the application of PD to general complex problems is that they are limited to fairly simple material behavior and pure mechanical problems based on explicit time integration. PD has been extended to other applications but losing simultaneously its simplicity and ease in modeling material failure. Furthermore, conventional PD suffers from instability and hourglass modes that require stabilization. It also requires the use of constant horizon sizes, which drastically reduces its computational efficiency. The latter issue was resolved by the so-called dual-horizon peridynamics (DH-PD) formulation and the introduction of the duality of horizons. Within the nonlocal operator method (NOM), the concept of nonlocality is further extended and can be considered a generalization of DH-PD. Combined with the energy functionals of various physical models, the nonlocal forms based on the dual-support concept can be derived. In addition, the variation of the energy functional allows implicit formulations of the nonlocal theory. While traditional integral equations are formulated in an integral domain, the dual-support approaches are based on dual integral domains. One prominent feature of NOM is its compatibility with variational and weighted residual methods. The NOM yields a direct numerical implementation based on the weighted residual method for many physical problems without the need for shape functions. Only the definition of the energy or boundary value problem is needed to drastically facilitate the implementation. The nonlocal operator plays an equivalent role to the derivatives of the shape functions in meshless methods and finite element methods (FEM). Based on the variational principle, the residual and the tangent stiffness matrix can be obtained with ease by a series of matrix multiplications. In addition, NOM can be used to derive many nonlocal models in strong form. The principal contributions of this dissertation are the implementation and application of NOM, and also the development of approaches for dealing with fractures within the NOM, mostly for dynamic fractures. The primary coverage and results of the dissertation are as follows: -The first/higher-order implicit NOM and explicit NOM, including a detailed description of the implementation, are presented. The NOM is based on so-called support, dual-support, nonlocal operators, and an operate energy functional ensuring stability. The nonlocal operator is a generalization of the conventional differential operators. Combining with the method of weighted residuals and variational principles, NOM establishes the residual and tangent stiffness matrix of operate energy functional through some simple matrix without the need of shape functions as in other classical computational methods such as FEM. NOM only requires the definition of the energy drastically simplifying its implementation. For the sake of conciseness, the implementation in this chapter is focused on linear elastic solids only, though the NOM can handle more complex nonlinear problems. An explicit nonlocal operator method for the dynamic analysis of elasticity solid problems is also presented. The explicit NOM avoids the calculation of the tangent stiffness matrix as in the implicit NOM model. The explicit scheme comprises the Verlet-velocity algorithm. The NOM can be very flexible and efficient for solving partial differential equations (PDEs). It's also quite easy for readers to use the NOM and extend it to solve other complicated physical phenomena described by one or a set of PDEs. Several numerical examples are presented to show the capabilities of this method. -A nonlocal operator method for the dynamic analysis of (thin) Kirchhoff plates is proposed. The nonlocal Hessian operator is derived from a second-order Taylor series expansion. NOM is higher-order continuous, which is exploited for thin plate analysis that requires $C^1$ continuity. The nonlocal dynamic governing formulation and operator energy functional for Kirchhoff plates are derived from a variational principle. The Verlet-velocity algorithm is used for time discretization. After confirming the accuracy of the nonlocal Hessian operator, several numerical examples are simulated by the nonlocal dynamic Kirchhoff plate formulation. -A nonlocal fracture modeling is developed and applied to the simulation of quasi-static and dynamic fractures using the NOM. The phase field's nonlocal weak and associated strong forms are derived from a variational principle. The NOM requires only the definition of energy. We present both a nonlocal implicit phase field model and a nonlocal explicit phase field model for fracture; the first approach is better suited for quasi-static fracture problems, while the key application of the latter one is dynamic fracture. To demonstrate the performance of the underlying approach, several benchmark examples for quasi-static and dynamic fracture are solved. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,9 KW - Variationsprinzip KW - Partial Differential Equations KW - Taylor Series Expansion KW - Peridynamics KW - Variational principle KW - Phase field method KW - Peridynamik KW - Phasenfeldmodell KW - Partielle Differentialgleichung KW - Nichtlokale Operatormethode Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221026-47321 ER - TY - THES A1 - Ortiz Alvis, Alfredo T1 - Urban Agoraphobia: The pursuit of security within confined community ties. Urban-ethnographic analysis on gated housing developments of Guadalajara, Mexico. N2 - The Gated Community (GC) phenomenon in Latin American cities has become an inherent element of their urban development, despite academical debate, their approach thrives within the housing market; not surprisingly, as some of the premises on which GCs are based, namely safety, control and supervision intersperse seamlessly with the insecure conditions of the contexts from which they arise. The current security crisis in Mexico, triggered in 2006 by the so-called war on drugs, has reached its peak with the highest insecurity rates in decades, representing a unique chance to study these interactions. Although the leading term of this research, Urban Agoraphobia, implies a causal dichotomy between the rise in the sense of fear amongst citizens and housing confinement as lineal consequence, I acknowledge that GCs represent a complex phenomenon, a hub of diverse factors and multidimensional processes held on four fundamental levels: global, social, individual and state-related. The focus of this dissertation is set on the individual plane and contributes, from the analysis of the GC’s resident’s perspective, experiences and perceptions, to a debate that has usually been limited to the scrutiny of other drivers, disregarding the role of dweller’s underlying fears, motivations and concerns. Assuming that the current ruling security model in Mexico tends to empower its commodification rather than its collective quality, this research draws upon the use of a methodological triangulation, along conceptual and contextual analyses, to test the hypothesis that insecurity plays an increasingly major role, leading citizens into the belief that acquiring a household in a controlled and surveilled community represents a counterweight against the feared environment of the open city. The focus of the analysis lies on the internal hatch of community ties as potential palliative for the provision of a sense of security, aiming to transcend the unidimensional discourse of GCs as defined mainly by their defensive apparatus. Residents’ perspectives acquired through ethnographical analyses may provide the chance to gain an essential view into a phenomenon that further consolidates without a critical study of its actual implications, not only for Mexican cities, but also for the Latin American and global contexts. KW - Agoraphobie KW - Geschlossene Gesellschaft KW - Volkskunde KW - Kommunität KW - Segregation KW - Urban Agoraphobia KW - Gated Communities KW - Ethnography KW - Community KW - Segregation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221005-47234 ER - TY - THES A1 - Yousefi, Hassan T1 - Discontinuous propagating fronts: linear and nonlinear systems N2 - The aim of this study is controlling of spurious oscillations developing around discontinuous solutions of both linear and non-linear wave equations or hyperbolic partial differential equations (PDEs). The equations include both first-order and second-order (wave) hyperbolic systems. In these systems even smooth initial conditions, or smoothly varying source (load) terms could lead to discontinuous propagating solutions (fronts). For the first order hyperbolic PDEs, the concept of central high resolution schemes is integrated with the multiresolution-based adaptation to capture properly both discontinuous propagating fronts and effects of fine-scale responses on those of larger scales in the multiscale manner. This integration leads to using central high resolution schemes on non-uniform grids; however, such simulation is unstable, as the central schemes are originally developed to work properly on uniform cells/grids. Hence, the main concern is stable collaboration of central schemes and multiresoltion-based cell adapters. Regarding central schemes, the considered approaches are: 1) Second order central and central-upwind schemes; 2) Third order central schemes; 3) Third and fourth order central weighted non-oscillatory schemes (central-WENO or CWENO); 4) Piece-wise parabolic methods (PPMs) obtained with two different local stencils. For these methods, corresponding (nonlinear) stability conditions are studied and modified, as well. Based on these stability conditions several limiters are modified/developed as follows: 1) Several second-order limiters with total variation diminishing (TVD) feature, 2) Second-order uniformly high order accurate non-oscillatory (UNO) limiters, 3) Two third-order nonlinear scaling limiters, 4) Two new limiters for PPMs. Numerical results show that adaptive solvers lead to cost-effective computations (e.g., in some 1-D problems, number of adapted grid points are less than 200 points during simulations, while in the uniform-grid case, to have the same accuracy, using of 2049 points is essential). Also, in some cases, it is confirmed that fine scale responses have considerable effects on higher scales. In numerical simulation of nonlinear first order hyperbolic systems, the two main concerns are: convergence and uniqueness. The former is important due to developing of the spurious oscillations, the numerical dispersion and the numerical dissipation. Convergence in a numerical solution does not guarantee that it is the physical/real one (the uniqueness feature). Indeed, a nonlinear systems can converge to several numerical results (which mathematically all of them are true). In this work, the convergence and uniqueness are directly studied on non-uniform grids/cells by the concepts of local numerical truncation error and numerical entropy production, respectively. Also, both of these concepts have been used for cell/grid adaptations. So, the performance of these concepts is also compared by the multiresolution-based method. Several 1-D and 2-D numerical examples are examined to confirm the efficiency of the adaptive solver. Examples involve problems with convex and non-convex fluxes. In the latter case, due to developing of complex waves, proper capturing of real answers needs more attention. For this purpose, using of method-adaptation seems to be essential (in parallel to the cell/grid adaptation). This new type of adaptation is also performed in the framework of the multiresolution analysis. Regarding second order hyperbolic PDEs (mechanical waves), the regularization concept is used to cure artificial (numerical) oscillation effects, especially for high-gradient or discontinuous solutions. There, oscillations are removed by the regularization concept acting as a post-processor. Simulations will be performed directly on the second-order form of wave equations. It should be mentioned that it is possible to rewrite second order wave equations as a system of first-order waves, and then simulated the new system by high resolution schemes. However, this approach ends to increasing of variable numbers (especially for 3D problems). The numerical discretization is performed by the compact finite difference (FD) formulation with desire feature; e.g., methods with spectral-like or optimized-error properties. These FD methods are developed to handle high frequency waves (such as waves near earthquake sources). The performance of several regularization approaches is studied (both theoretically and numerically); at last, a proper regularization approach controlling the Gibbs phenomenon is recommended. At the end, some numerical results are provided to confirm efficiency of numerical solvers enhanced by the regularization concept. In this part, shock-like responses due to local and abrupt changing of physical properties, and also stress wave propagation in stochastic-like domains are studied. KW - Partielle Differentialgleichung KW - Adaptives System KW - Wavelet KW - Tichonov-Regularisierung KW - Hyperbolic PDEs KW - Adaptive central high resolution schemes KW - Wavelet based adaptation KW - Tikhonov regularization Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220922-47178 ER - TY - THES A1 - Carvajal Bermúdez, Juan Carlos T1 - New methods of citizen participation based on digital technologies N2 - The current thesis presents research about new methods of citizen participation based on digital technologies. The focus on the research lies on decentralized methods of participation where citizens take the role of co-creators. The research project first conducted a review of the literature on citizen participation, its origins and the different paradigms that have emerged over the years. The literature review also looked at the influence of technologies on participation processes and the theoretical frameworks that have emerged to understand the introduction of technologies in the context of urban development. The literature review generated the conceptual basis for the further development of the thesis. The research begins with a survey of technology enabled participation applications that examined the roles and structures emerging due to the introduction of technology. The results showed that cities use technology mostly to control and monitor urban infrastructure and are rather reluctant to give citizens the role of co-creators. Based on these findings, three case studies were developed. Digital tools for citizen participation were conceived and introduced for each case study. The adoption and reaction of the citizens were observed using three data collection methods. The results of the case studies showed consistently that previous participation and engagement with informal citizen participation are a determinining factor in the potential adoption of digital tools for decentralized engagement. Based on these results, the case studies proposed methods and frameworks that can be used for the conception and introduction of technologies for decentralized citizen participation. KW - Partizipation KW - Beteiligung KW - Technologie KW - Citizen participation KW - Digital technologies Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220906-47124 ER - TY - THES A1 - López Zermeño, Jorge Alberto T1 - Isogeometric and CAD-based methods for shape and topology optimization: Sensitivity analysis, Bézier elements and phase-field approaches N2 - The Finite Element Method (FEM) is widely used in engineering for solving Partial Differential Equations (PDEs) over complex geometries. To this end, it is required to provide the FEM software with a geometric model that is typically constructed in a Computer-Aided Design (CAD) software. However, FEM and CAD use different approaches for the mathematical description of the geometry. Thus, it is required to generate a mesh, which is suitable for FEM, based on the CAD model. Nonetheless, this procedure is not a trivial task and it can be time consuming. This issue becomes more significant for solving shape and topology optimization problems, which consist in evolving the geometry iteratively. Therefore, the computational cost associated to the mesh generation process is increased exponentially for this type of applications. The main goal of this work is to investigate the integration of CAD and CAE in shape and topology optimization. To this end, numerical tools that close the gap between design and analysis are presented. The specific objectives of this work are listed below: • Automatize the sensitivity analysis in an isogeometric framework for applications in shape optimization. Applications for linear elasticity are considered. • A methodology is developed for providing a direct link between the CAD model and the analysis mesh. In consequence, the sensitivity analysis can be performed in terms of the design variables located in the design model. • The last objective is to develop an isogeometric method for shape and topological optimization. This method should take advantage of using Non-Uniform Rational B-Splines (NURBS) with higher continuity as basis functions. Isogeometric Analysis (IGA) is a framework designed to integrate the design and analysis in engineering problems. The fundamental idea of IGA is to use the same basis functions for modeling the geometry, usually NURBS, for the approximation of the solution fields. The advantage of integrating design and analysis is two-fold. First, the analysis stage is more accurate since the system of PDEs is not solved using an approximated geometry, but the exact CAD model. Moreover, providing a direct link between the design and analysis discretizations makes possible the implementation of efficient sensitivity analysis methods. Second, the computational time is significantly reduced because the mesh generation process can be avoided. Sensitivity analysis is essential for solving optimization problems when gradient-based optimization algorithms are employed. Automatic differentiation can compute exact gradients, automatically by tracking the algebraic operations performed on the design variables. For the automation of the sensitivity analysis, an isogeometric framework is used. Here, the analysis mesh is obtained after carrying out successive refinements, while retaining the coarse geometry for the domain design. An automatic differentiation (AD) toolbox is used to perform the sensitivity analysis. The AD toolbox takes the code for computing the objective and constraint functions as input. Then, using a source code transformation approach, it outputs a code for computing the objective and constraint functions, and their sensitivities as well. The sensitivities obtained from the sensitivity propagation method are compared with analytical sensitivities, which are computed using a full isogeometric approach. The computational efficiency of AD is comparable to that of analytical sensitivities. However, the memory requirements are larger for AD. Therefore, AD is preferable if the memory requirements are satisfied. Automatic sensitivity analysis demonstrates its practicality since it simplifies the work of engineers and designers. Complex geometries with sharp edges and/or holes cannot easily be described with NURBS. One solution is the use of unstructured meshes. Simplex-elements (triangles and tetrahedra for two and three dimensions respectively) are particularly useful since they can automatically parameterize a wide variety of domains. In this regard, unstructured Bézier elements, commonly used in CAD, can be employed for the exact modelling of CAD boundary representations. In two dimensions, the domain enclosed by NURBS curves is parameterized with Bézier triangles. To describe exactly the boundary of a two-dimensional CAD model, the continuity of a NURBS boundary representation is reduced to C^0. Then, the control points are used to generate a triangulation such that the boundary of the domain is identical to the initial CAD boundary representation. Thus, a direct link between the design and analysis discretizations is provided and the sensitivities can be propagated to the design domain. In three dimensions, the initial CAD boundary representation is given as a collection of NURBS surfaces that enclose a volume. Using a mesh generator (Gmsh), a tetrahedral mesh is obtained. The original surface is reconstructed by modifying the location of the control points of the tetrahedral mesh using Bézier tetrahedral elements and a point inversion algorithm. This method offers the possibility of computing the sensitivity analysis using the analysis mesh. Then, the sensitivities can be propagated into the design discretization. To reuse the mesh originally generated, a moving Bézier tetrahedral mesh approach was implemented. A gradient-based optimization algorithm is employed together with a sensitivity propagation procedure for the shape optimization cases. The proposed shape optimization approaches are used to solve some standard benchmark problems in structural mechanics. The results obtained show that the proposed approach can compute accurate gradients and evolve the geometry towards optimal solutions. In three dimensions, the moving mesh approach results in faster convergence in terms of computational time and avoids remeshing at each optimization step. For considering topological changes in a CAD-based framework, an isogeometric phase-field based shape and topology optimization is developed. In this case, the diffuse interface of a phase-field variable over a design domain implicitly describes the boundaries of the geometry. The design variables are the local values of the phase-field variable. The descent direction to minimize the objective function is found by using the sensitivities of the objective function with respect to the design variables. The evolution of the phase-field is determined by solving the time dependent Allen-Cahn equation. Especially for topology optimization problems that require C^1 continuity, such as for flexoelectric structures, the isogeometric phase field method is of great advantage. NURBS can achieve the desired continuity more efficiently than the traditional employed functions. The robustness of the method is demonstrated when applied to different geometries, boundary conditions, and material configurations. The applications illustrate that compared to piezoelectricity, the electrical performance of flexoelectric microbeams is larger under bending. In contrast, the electrical power for a structure under compression becomes larger with piezoelectricity. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,4 KW - CAD KW - Gestaltoptimierung KW - Topologieoptimierung KW - Isogeometrische Analyse KW - Finite-Elemente-Methode KW - Computer-Aided Design KW - Shape Optimization KW - Topology Optimization KW - Isogeometric Analysis KW - Finite Element Method Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220831-47102 ER - TY - THES A1 - Riechert, Christin T1 - Hydratation und Eigenschaften von Gips-Zement-Puzzolan-Bindemitteln mit alumosilikatischen Puzzolanen N2 - Reine Calciumsulfatbindemittel weisen eine hohe Löslichkeit auf. Feuchteinwirkung führt zudem zu starken Festigkeitsverlusten. Aus diesem Grund werden diese Bindemittel ausschließlich für Baustoffe und -produkte im Innenbereich ohne permanenten Feuchtebeanspruchung eingesetzt. Eine Möglichkeit, die Feuchtebeständigkeit zu erhöhen, ist die Beimischung puzzolanischer und zementärer Komponenten. Diese Mischsysteme werden Gips-Zement-Puzzolan-Bindemittel (kurz: GZPB) genannt. Mischungen aus Calciumsulfaten und Portlandzementen allein sind aufgrund der treibenden Ettringitbildung nicht raumbeständig. Durch die Zugabe von puzzolanischen Stoffen können aber Bedingungen im hydratisierenden System geschaffen werden, welche eine rissfreie Erhärtung ermöglichen. Hierfür ist eine exakte Rezeptierung der GZPB notwendig, um die GZPB-typischen, ettringitbedingten Dehnungen zeitlich zu begrenzen. Insbesondere bei alumosilikatischen Puzzolanen treten während der Hydratation gegenüber rein silikatischen Puzzolanen deutlich höhere Expansionen auf, wodurch die Gefahr einer potenziellen Rissbildung steigt. Für die Erstellung geeigneter GZPB-Zusammensetzungen bedarf es daher einer Methodik, um raumbeständig erhärtende Systeme sicher von destruktiven Mischungen unterscheiden zu können. Sowohl für die Rezeptierung als auch für die Anwendung der GZPB existieren in Deutschland keinerlei Normen. Darüber hinaus sind die Hydratationsvorgänge sowie die entstehenden Produkte nicht konsistent beschrieben. Auch auf die Besonderheiten der GZPB mit alumosilikatischen Puzzolanen wird in der Literatur nur unzureichend eingegangen. Ziel war es daher, ein grundlegendes Verständnis der Hydratation sowie eine sichere Methodik zur Rezeptierung raumbeständig und rissfrei erhärtender GZPB, insbesondere in Hinblick auf die Verwendung alumosilikatischer Puzzolane, zu erarbeiten. Darüber hinaus sollte systematisch der Einfluss der Einzelkomponenten auf Hydratation und Eigenschaften dieser Bindemittelsysteme untersucht werden. Dies soll ermöglichen, die GZPB für ein breites Anwendungsspektrum als Bindemittel zu etablieren, und somit vorteilhafte Eigenschaften der Calciumsulfate (geringe Schwindneigung, geringe CO2-Emission etc.) mit der Leistungs-fähigkeit von Zementen (Wasserbeständigkeit, Festigkeit, Dauerhaftigkeit etc.) zu verbinden. Als Ausgangsstoffe der Untersuchungen zu den GZPB wurden Stuckgips und Alpha-Halbhydrat als Calciumsulfatbindemittel in unterschiedlichen Anteilen im GZPB verwendet. Die Puzzolan-Zement-Verhältnisse wurden ebenfalls variiert. Als Puzzolan kam für den Großteil der Untersuchungen ein alumosilikatisches Metakaolin zum Einsatz. Als kalkspendende Komponente diente ein reiner Portlandzement. Das Untersuchungsprogramm gliederte sich in 4 Teile. Zuerst wurde anhand von CaO- und pH-Wert-Messungen in Suspensionen sowie dem Längenänderungsverhalten von Bindemittelleimen verschiedener Zusammensetzungen eine Vorauswahl geeigneter GZPB-Rezepturen ermittelt. Danach erfolgten, ebenfalls an Bindemittelleimen, Untersuchungen zu den Eigenschaften der als geeignet eingeschätzten GZPB-Mischungen. Hierzu zählten Langzeitbetrachtungen zur rissfreien Erhärtung bei unterschiedlichen Umgebungsbedingungen sowie die Festigkeitsentwicklung im trockenen und feuchten Zustand. Im nächsten Schritt wurde anhand zweier exemplarischer GZPB-Zusammensetzungen (mit silikatischen und alumosilikatischen Puzzolan) die prinzipiell mögliche Phasenzusammensetzung unter Variation des Puzzolan-Zement-Verhältnisses (P/Z-Verhältnis) und des Calciumsulfatanteils im thermodynamischen Gleichgewichtszustand berechnet. Hier wurde im Besonderen auf Unterschiede der silikatischen und alumosilikatischen Puzzolane eingegangen. Im letzten Teil der Untersuchungen wurden die Hydratationskinetik der GZPB sowie die Gefügeentwicklung näher betrachtet. Hierfür wurden die Porenlösungen chemisch analysiert und Sättigungsindizes berechnet, sowie elektronenmikropische, porosimetrische und röntgenografische Untersuchungen durchgeführt. Abschließend wurden die Ergebnisse gesamtheitlich interpretiert, da die Ergebnisse der einzelnen Untersuchungsprogramme miteinander in Wechselwirkung stehen. Als hauptsächliche Hydratationsprodukte wurden Calciumsulfat-Dihydrat, Ettringit und C-(A)-S-H-Phasen ermittelt, deren Anteile im GZPB neben dem Calciumsulfatanteil und dem Puzzolan-Zement-Verhältnis auch deutlich vom Wasserangebot und der Gefügeentwicklung abhängen. Bei Verwendung von alumosilikatischen Puzzolans kommt es wahrscheinlich zur teilweisen Substitution des Siliciums durch Aluminium in den C-S-H-Phasen. Dies erscheint aufgrund des Nachweises der für diese Phasen typischen, folienartigen Morphologie wahrscheinlich. Portlandit wurde in raumbeständigen GZPB-Systemen nur zu sehr frühen Zeitpunkten in geringen Mengen gefunden. In den Untersuchungen konnte ein Teil der in der Literatur beschriebenen, prinzipiellen Hydratationsabläufe bestätigt werden. Bei Verwendung von Halbhydrat als Calciumsulfatkomponente entsteht zuerst Dihydrat und bildet die Primärstruktur der GZPB. In dieses existierende Grundgefüge kristallisieren dann das Ettringit und die C-(A)-S-H-Phasen. In den GZPB sorgen entgegen der Beschreibungen in der Literatur nicht ausschließlich die C-(A)-S-H-Phasen zur Verbesserung der Feuchtebeständigkeit und der Erhöhung des Festigkeitsniveaus, sondern auch das Ettringit. Beide Phasen überwachsen im zeitlichen Verlauf der Hydratation die Dihydratkristalle in der Matrix und hüllen diese – je nach Calciumsulfatanteil im GZPB – teilweise oder vollständig ein. Diese Umhüllung sowie die starke Gefügeverdichtung durch die C-(A)-S-H-Phasen und das Ettringit bedingen, dass ein lösender Angriff durch Wasser erschwert oder gar verhindert wird. Gleichzeitig wird die Gleitfähigkeit an den Kontaktstellen der Dihydratkristalle verringert. Eine rissfreie und raumbeständige Erhärtung ist für die gefahrlose Anwendung eines GZPB-Systems essentiell. Hierfür ist die Kinetik der Ettringitbildung von elementarer Bedeutung. Die gebildete Ettringitmenge spielt nur eine untergeordnete Rolle. Selbst ausgeprägte, ettringitbedingte Dehnungen und hohe sich bildende Mengen führen zu frühen Zeitpunkten, wenn die Dihydratkristalle noch leicht gegeneinander verschiebbar sind, zu keinen Schäden. Bleibt die Übersättigung bezüglich Ettringit und somit auch der Kristallisationsdruck allerdings über einen langen Zeitraum hoch, genügen bereits geringe Ettringitmengen, um das sich stetig verfestigende Gefüge stark zu schädigen. Die für die raumbeständige Erhärtung der GZPB notwendige, schnelle Abnahme der Ettringitübersättigung wird hauptsächlich durch die Reaktivität des Puzzolans beeinflusst. Die puzzolanische Reaktion führt zur Bindung des aus dem Zement stammenden Calciumhydroxid durch die Bildung von C-(A)-S-H-Phasen und Ettringit. Hierdurch sinkt die Calcium- und Hydroxidionenkonzentration in der Porenlösung im Verlauf der Hydratation, wodurch auch die Übersättigung bezüglich Ettringit abnimmt. Je höher die Reaktivität des Puzzolans ist, desto schneller sinkt der Sättigungsindex des Ettringits und somit auch der Kristallisationsdruck. Nach Unterschreiten eines noch näher zu klärendem Grenzwert der Übersättigung stagnieren die Dehnungen. Das Ettringit kristallisiert bzw. wächst nun bevorzugt in den Poren ohne eine weitere, äußere Volumenzunahme zu verursachen. Um eine schadensfreie Erhärtung des GZPB zu gewährleisten, muss gerade in der frühen Phase der Hydratation ein ausreichendes Wasserangebot gewährleistet werden, so dass die Ettringitbildung möglichst vollständig ablaufen kann. Andernfalls kann es bei einer Wiederbefeuchtung zur Reaktivierung der Ettringitbildung kommen, was im eingebauten Zustand Schäden verursachen kann. Die Gewährleistung eines ausreichenden Wasserangebots ist im GZPB-System nicht unproblematisch. In Abhängigkeit der GZPB-Zusammensetzung können sich große Ettringitmengen bilden, die einen sehr hohen Wasserbedarf aufweisen. Deshalb kann es, je nach verwendeten Wasser-Bindemittel-Wert, im Bindemittelleim zu einem Wassermangel kommen, welcher die weitere Hydratation verlangsamt bzw. komplett verhindert. Zudem können GZPB-Systeme teils sehr dichte Gefüge ausbilden, wodurch der Wassertransport zum Reaktionsort des Ettringits zusätzlich behindert wird. Die Konzeption raumbeständiger GZPB-Systeme muss anhand mehrerer aufeinander aufbauender Untersuchungen erfolgen. Zur Vorauswahl geeigneter Puzzolan-Zementverhältnisse eignen sich die Messungen der CaO-Konzentration und des pH-Wertes in Suspensionen. Als alleinige Beurteilungsgrundlage reicht dies allerdings nicht aus. Zusätzlich muss das Längenänderungs-verhalten beurteilt werden. Raumbeständige Mischungen mit alumosilikatischen Puzzolanen zeigen zu frühen Zeitpunkten starke Dehnungen, welche dann abrupt stagnieren. Stetige – auch geringe – Dehnungen weisen auf eine destruktive Zusammensetzung hin. Mit diesem mehrstufigen Vorgehen können raumbeständige, stabile GZPB-Systeme konzipiert werden, so dass die Zielstellung der Arbeit erreicht wurde und ein sicherer praktischer Einsatz dieser Bindemittelart gewährleistet werden kann.   KW - Gips KW - Zement KW - Hydratation KW - Gips-Zement-Puzzolan-Bindemittel KW - Hydratation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220825-47076 SN - 978-3-00-073003-0 ER - TY - THES A1 - Schlaffke, Markus T1 - Die Rekonstruktion des Menaka-Archivs: Navigationen durch die Tanz-Moderne zwischen Kolkata, Mumbai und Berlin 1936-38 N2 - Die Europatournee des Indischen Menaka-Balletts von 1936-38 ist der Ausgangspunkt dieser archivologischen Navigation entlang der Spuren indischer KünstlerInnen in Europa. In einer breit angelegten Archivrecherche wurden dazu Dokumente, Fundstücke, orale Erinnerungen und ethnografische Beobachtungen aus dem Kontext der Menaka-Tournee durch das nationalsozialistische Deutschland zusammengetragen. Das Buch beschreibt den Rekonstruktionsprozess eines bedeutsamen Projekts der indischen Tanzmoderne. Es verfolgt dabei eine Methode, mit der sich die fragmentierten Dokumente des Medienereignisses als Spur lesen lassen und nutzt eine künstlerisch-forschende Involvierung in gegenwärtige Erinnerungspolitiken, in welche die verflochtenen Strukturen der künstlerischen Avantgarde zwischen Kolkata, Mumbai und Berlin hineinreichen. Die Spur des Menaka-Ballett erweist sich dabei als Teil weitreichender ideologischer, tänzerischer, musikalischer, filmischer und literarischer Strömungen, die auch in gegenwärtigen kulturellen Bestimmungen fortwirken. Fotografien, Zeitungsberichte, Film- und Tonaufnahmen, Briefe und persönliche Erinnerungstücke erzählen davon, wie sich, vor dem Hintergrund der im antikolonialen Aufbruch befindlichen Kulturreform in Indien, und der nationsozialistisch-völkischen Kulturpolitik in Deutschland, die Tänzerinnen und Musiker der indischen Ballettgruppe und die deutsche Öffentlichkeit im gegenseitigen Spiegel betrachteten, während die Vorzeichen des kommenden Krieges immer deutlicher wurden. KW - Menaka KW - Menaka-Archiv KW - Leila Roy-Sokhey Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220823-47069 ER - TY - THES A1 - Shaaban Mohamed, Ahmed Mostafa T1 - Isogeometric boundary element analysis and structural shape optimization for Helmholtz acoustic problems N2 - In this thesis, a new approach is developed for applications of shape optimization on the time harmonic wave propagation (Helmholtz equation) for acoustic problems. This approach is introduced for different dimensional problems: 2D, 3D axi-symmetric and fully 3D problems. The boundary element method (BEM) is coupled with the isogeometric analysis (IGA) forming the so-called (IGABEM) which speeds up meshing and gives higher accuracy in comparison with standard BEM. BEM is superior for handling unbounded domains by modeling only the inner boundaries and avoiding the truncation error, present in the finite element method (FEM) since BEM solutions satisfy the Sommerfeld radiation condition automatically. Moreover, BEM reduces the space dimension by one from a volumetric three-dimensional problem to a surface two-dimensional problem, or from a surface two-dimensional problem to a perimeter one-dimensional problem. Non-uniform rational B-splines basis functions (NURBS) are used in an isogeometric setting to describe both the CAD geometries and the physical fields. IGABEM is coupled with one of the gradient-free optimization methods, the Particle Swarm Optimization (PSO) for structural shape optimization problems. PSO is a straightforward method since it does not require any sensitivity analysis but it has some trade-offs with regard to the computational cost. Coupling IGA with optimization problems enables the NURBS basis functions to represent the three models: shape design, analysis and optimization models, by a definition of a set of control points to be the control variables and the optimization parameters as well which enables an easy transition between the three models. Acoustic shape optimization for various frequencies in different mediums is performed with PSO and the results are compared with the benchmark solutions from the literature for different dimensional problems proving the efficiency of the proposed approach with the following remarks: - In 2D problems, two BEM methods are used: the conventional isogeometric boundary element method (IGABEM) and the eXtended IGABEM (XIBEM) enriched with the partition-of-unity expansion using a set of plane waves, where the results are generally in good agreement with the linterature with some computation advantage to XIBEM which allows coarser meshes. -In 3D axi-symmetric problems, the three-dimensional problem is simplified in BEM from a surface integral to a combination of two 1D integrals. The first is the line integral similar to a two-dimensional BEM problem. The second integral is performed over the angle of revolution. The discretization is applied only to the former integration. This leads to significant computational savings and, consequently, better treatment for higher frequencies over the full three-dimensional models. - In fully 3D problems, a detailed comparison between two BEM methods: the conventional boundary integral equation (CBIE) and Burton-Miller (BM) is provided including the computational cost. The proposed models are enhanced with a modified collocation scheme with offsets to Greville abscissae to avoid placing collocation points at the corners. Placing collocation points on smooth surface enables accurate evaluation of normals for BM formulation in addition to straightforward prediction of jump-terms and avoids singularities in $\mathcal{O} (1/r)$ integrals eliminating the need for polar integration. Furthermore, no additional special treatment is required for the hyper-singular integral while collocating on highly distorted elements, such as those containing sphere poles. The obtained results indicate that, CBIE with PSO is a feasible alternative (except for a small number of fictitious frequencies) which is easier to implement. Furthermore, BM presents an outstanding treatment of the complicated geometry of mufflers with internal extended inlet/outlet tube as an interior 3D Helmholtz acoustic problem instead of using mixed or dual BEM. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,6 KW - Randelemente-Methode KW - Isogeometrische Analyse KW - Gestaltoptimierung KW - Boundary Element Method KW - Isogeometric Analysis KW - Helmholtz Acoustic Problems KW - Shape Optimization Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220816-47030 ER - TY - THES A1 - Argañaraz, Cecilia Magdalena T1 - Tiempos imaginados y espacios áridos: controversias en torno al agua en el Valle de Catamarca (siglos XIX-XX) N2 - The thesis addresses journalistic, administrative and judicial historical documentation to analyze the links between aridity and geographical imaginaries in the province of Catamarca (Argentina), from a historical point of view. The research aims to contribute to the understanding of the "non-hegemonic" versions of Modernity, its territoriality and the productions of geographic imaginaries that they involve. To provide a broad purpose, it raises as an object of study the ways in which "modern" practices, actors, links, discourses and expectations about the territory are mobilized when they are located in a space in "other" water conditions. those that are intended to "civilize" it. The general objective of the research is to analyze time-space controversies around water in the city and valley of Catamarca towards 19th and 20th centuries. The specific objectives derived are a) analyzing how various actors are related to waters behavior - in other words, the local water regime – in Catamarca and the meanings built around it. b) to analyze the controversies about the place of Catamarca and its water regime in the local and national geographic imaginary. c) analyze controversies in which the relationships between actors and materialities involved in modernization projects are put into discussion. These concerns by the experience of the actors and by the historical-spatial imagination of the territory, combined, led to the construction of an interdisciplinary methodology based on tools from anthropology, sociology, geography and history. KW - Anthologie KW - Geschichte KW - Umweltforschung KW - Stadtforschung KW - ANTROPOLOGÍA KW - HISTORIA KW - ECOLOGÍA POLÍTICA KW - ESTUDIOS URBANOS KW - HISTORIA AMBIENTAL KW - Anthology KW - History KW - Political ecology KW - urban studies KW - Environmental studies Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220803-46817 ER - TY - THES A1 - Torres, César T1 - El paisaje de la Cuenca Lechera Central Argentina: la huella de la producción sobre el territorio N2 - In recent times, the study of landscape heritage acquires value by virtue of becoming an alternative to rethink regional development, especially from the point of view of territorial planning. In this sense, the Central Argentine Dairy Basin (CADB) is presented as a space where the traces of different human projects have accumulated over centuries of occupation, which can be read as heritage. The impact of dairy farming and other productive activities has shaped the configuration of its landscape. The main hypothesis assumed that a cultural landscape would have been formed in the CADB, whose configuration would have depended to a great extent on the history of productive activities and their deployment over the territory, and this same history would hide the keys to its alternative. The thesis approached the object of study from descriptive and cartographic methods that placed the narration of the history of territory and the resources of the landscape as a discursive axis. A series of intentional readings of the territory and its constituent parts pondered the layers of data that have accumulated on it in the form of landscape traces, with the help of an approach from complementary dimensions (natural, sociocultural, productive, planning). Furthermore, the intersection of historical sources was used in order to allow the construction of the territorial story and the detection of the origin of the landscape components. A meticulous cartographic work also helped to spatialise the set of phenomena and elements studied, and was reflected in a multiscalar scanning. KW - Landschaft KW - PAISAJE KW - TERRITORIO KW - ORDENAMIENTO TERRITORIAL KW - Raumordnung KW - Territorium KW - Landscape KW - Territory KW - Territorial planning Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220803-46835 ER - TY - THES A1 - Cicek, Burhan T1 - Revisiting vernacular technique: Engineering a low environmental impact earth stabilisation method N2 - The major drawbacks of earth as a construction material — such as its low water stability and moderate strength — have led mankind to stabilize earth. Different civilizations developed vernacular techniques mainly focussing on lime, pozzolan or gypsum stabilization. Recently, cement has become the most commonly used additive in earth stabilization as it improves the strength and durability of plain earth. Also, it is a familiar and globally available construction material. However, using cement as an additive reduces the environmental advantages of earth and run counter to global targets regarding the reduction of CO2 emissions. Alternatives to cement stabilization are currently neither efficient enough to reduce its environmental impact nor allow the possibility of obtaining better results than those of cement. As such, this thesis deals with the rediscovery of a reverse engineering approach for a low environmental impact earth stabilization technique, aiming to replace cement in earth stabilization. The first step in the method consists in a comprehensive review of earth stabilization with regards to earthen building standards and soil classification, which allows us to identify the research gap. The review showed that there is great potential in using other additives which result in similar improvements as those achieved by cement. However, the studies that have been conducted so far either use expansive soils, which are not suitable for earth constructions or artificial pozzolans that indirectly contribute to CO2 emissions. This is the main research gap. The key concept for the development in the second step of the method is to combine vernacular additives to both improve the strength and durability of plain earth and to reduce the CO2 emissions. Various earth-mixtures were prepared and both development and performance tests were done to investigate the performance of this technique. The laboratory analyses on mix-design have proven a high durability and the results show a remarkable increase in strength performance. Furthermore, a significant reduction in CO2 emissions in comparison to cement stabilization could be shown. The third step of the method discusses the results drawn from the experimental programme. In addition, the potential of the new earth mixture with regards to its usability in the field of building construction and architectural design is further elaborated on. The method used in this study is the first of its kind that allows investors to avoid the very time-consuming processes such as finding a suitable source for soil excavation and soil classification. The developed mixture has significant workability and suitability for production of stabilized earthen panels — the very first of its kind. Such a panel is practically feasible, reasonable, and could be integrated into earthen building standards in general and in particular to DIN 18948, which is related to earthen boards and published in 2018. KW - Lehm KW - Stabilisierung KW - Lehmbau KW - Kalk KW - Gips Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220803-46989 ER - TY - THES A1 - Gollub, Tim T1 - Information Retrieval for the Digital Humanities N2 - In ten chapters, this thesis presents information retrieval technology which is tailored to the research activities that arise in the context of corpus-based digital humanities projects. The presentation is structured by a conceptual research process that is introduced in Chapter 1. The process distinguishes a set of five research activities: research question generation, corpus acquisition, research question modeling, corpus annotation, and result dissemination. Each of these research activities elicits different information retrieval tasks with special challenges, for which algorithmic approaches are presented after an introduction of the core information retrieval concepts in Chapter 2. A vital concept in many of the presented approaches is the keyquery paradigm introduced in Chapter 3, which represents an operation that returns relevant search queries in response to a given set of input documents. Keyqueries are proposed in Chapter 4 for the recommendation of related work, and in Chapter 5 for improving access to aspects hidden in the long tail of search result lists. With pseudo-descriptions, a document expansion approach is presented in Chapter 6. The approach improves the retrieval performance for corpora where only bibliographic meta-data is originally available. In Chapter 7, the keyquery paradigm is employed to generate dynamic taxonomies for corpora in an unsupervised fashion. Chapter 8 turns to the exploration of annotated corpora, and presents scoped facets as a conceptual extension to faceted search systems, which is particularly useful in exploratory search settings. For the purpose of highlighting the major topical differences in a sequence of sub-corpora, an algorithm called topical sequence profiling is presented in Chapter 9. The thesis concludes with two pilot studies regarding the visualization of (re)search results for the means of successful result dissemination: a metaphoric interpretation of the information nutrition label, as well as the philosophical bodies, which are 3D-printed search results. N2 - In zehn Kapiteln stellt diese Arbeit Information-Retrieval-Technologien vor, die auf die Forschungsaktivitäten korpusbasierter Digital-Humanities-Projekte zugeschnitten sind. Die Arbeit strukturiert sich an Hand eines konzeptionellen Forschungsprozess der in Kapitel 1 vorgestellt wird. Der Prozess gliedert sich in fünf Forschungsaktivitäten: Die Generierung einer Forschungsfrage, die Korpusakquise, die Modellierung der Forschungsfrage, die Annotation des Korpus sowie die Verbreitung der Ergebnisse. Jede dieser Forschungsaktivitäten bringt unterschiedliche Information-Retrieval-Aufgaben mit besonderen Herausforderungen mit sich, für die, nach einer Einführung in die zentralen Information-Retrieval-Konzepte in Kapitel 2, algorithmische Ansätze vorgestellt werden. Ein wesentliches Konzept der vorgestellten Ansätze ist das in Kapitel 3 eingeführte Keyquery-Paradigma. Hinter dem Paradigma steht eine Suchoperation, die als Antwort auf eine gegebene Menge von Eingabedokumenten relevante Suchanfragen zurückgibt. Keyqueries werden in Kapitel 4 für die Empfehlung verwandter Arbeiten, in Kapitel 5 für die Verbesserung des Zugangs zu Aspekten im Long Tail von Suchergebnislisten vorgeschlagen. Mit Pseudo-Beschreibungen wird in Kapitel 6 ein Ansatz zur Document-Expansion vorgestellt. Der Ansatz verbessert die Suchleistung für Korpora, bei denen ursprünglich nur bibliografische Metadaten vorhanden sind. In Kapitel 7 wird das Keyquery-Paradigma eingesetzt, um auf unüberwachte Weise dynamische Taxonomien für Korpora zu generieren. Kapitel 8 wendet sich der Exploration von annotierten Korpora zu und stellt Scoped Facets als konzeptionelle Erweiterung von facettierten Suchsystemen vor, die besonders in explorativen Suchszenarien nützlich ist. Um die wichtigsten thematischen Unterschiede und Entwicklungen in einer Sequenz von Sub-Korpora hervorzuheben, wird in Kapitel 9 ein Algorithmus zum Topical Sequence Profiling vorgestellt. Die Arbeit schließt mit zwei Pilotstudien zur Visualisierung von Such- bzw. Forschungsergebnissen als Mittel für eine erfolgreiche Ergebnisverbreitung: eine metaphorische Interpretation des Information-Nutrition-Labels, sowie die philosophischen Körper, 3D-gedruckte Suchergebnisse. KW - Information Retrieval KW - Explorative Suche KW - Digital Humanities KW - keyqueries Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220801-46738 ER - TY - THES A1 - Nouri, Hamidreza T1 - Mechanical Behavior of two dimensional sheets and polymer compounds based on molecular dynamics and continuum mechanics approach N2 - Compactly, this thesis encompasses two major parts to examine mechanical responses of polymer compounds and two dimensional materials: 1- Molecular dynamics approach is investigated to study transverse impact behavior of polymers, polymer compounds and two dimensional materials. 2- Large deflection of circular and rectangular membranes is examined by employing continuum mechanics approach. Two dimensional materials (2D), including, Graphene and molybdenum disulfide (MoS2), exhibited new and promising physical and chemical properties, opening new opportunities to be utilized alone or to enhance the performance of conventional materials. These 2D materials have attracted tremendous attention owing to their outstanding physical properties, especially concerning transverse impact loading. Polymers, with the backbone of carbon (organic polymers) or do not include carbon atoms in the backbone (inorganic polymers) like polydimethylsiloxane (PDMS), have extraordinary characteristics particularly their flexibility leads to various easy ways of forming and casting. These simple shape processing label polymers as an excellent material often used as a matrix in composites (polymer compounds). In this PhD work, Classical Molecular Dynamics (MD) is implemented to calculate transverse impact loading of 2D materials as well as polymer compounds reinforced with graphene sheets. In particular, MD was adopted to investigate perforation of the target and impact resistance force . By employing MD approach, the minimum velocity of the projectile that could create perforation and passes through the target is obtained. The largest investigation was focused on how graphene could enhance the impact properties of the compound. Also the purpose of this work was to discover the effect of the atomic arrangement of 2D materials on the impact problem. To this aim, the impact properties of two different 2D materials, graphene and MoS2, are studied. The simulation of chemical functionalization was carried out systematically, either with covalently bonded molecules or with non-bonded ones, focusing the following efforts on the covalently bounded species, revealed as the most efficient linkers. To study transverse impact behavior by using classical MD approach , Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) software, that is well-known among most researchers, is employed. The simulation is done through predefined commands in LAMMPS. Generally these commands (atom style, pair style, angle style, dihedral style, improper style, kspace style, read data, fix, run, compute and so on) are used to simulate and run the model for the desired outputs. Depends on the particles and model types, suitable inter-atomic potentials (force fields) are considered. The ensembles, constraints and boundary conditions are applied depends upon the problem definition. To do so, atomic creation is needed. Python codes are developed to generate particles which explain atomic arrangement of each model. Each atomic arrangement introduced separately to LAMMPS for simulation. After applying constraints and boundary conditions, LAMMPS also include integrators like velocity-Verlet integrator or Brownian dynamics or other types of integrator to run the simulation and finally the outputs are emerged. The outputs are inspected carefully to appreciate the natural behavior of the problem. Appreciation of natural properties of the materials assist us to design new applicable materials. In investigation on the large deflection of circular and rectangular membranes, which is related to the second part of this thesis, continuum mechanics approach is implemented. Nonlinear Föppl membrane theory, which carefully release nonlinear governing equations of motion, is considered to establish the non-linear partial differential equilibrium equations of the membranes under distributed and centric point loads. The Galerkin and energy methods are utilized to solve non-linear partial differential equilibrium equations of circular and rectangular plates respectively. Maximum deflection as well as stress through the film region, which are kinds of issue in many industrial applications, are obtained. T2 - Mechanisches Verhalten von zweidimensionalen Schichten und Polymerverbindungen basierend auf molekulardynamischer und kontinuumsmechanischem Ansatz KW - Molekulardynamik KW - Polymerverbindung KW - Auswirkung KW - Molecular Dynamics Simulation KW - Continuum Mechnics KW - Polymer compound KW - Impact Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220713-46700 ER - TY - THES A1 - Kiesel, Johannes T1 - Harnessing Web Archives to Tackle Selected Societal Challenges N2 - With the growing importance of the World Wide Web, the major challenges our society faces are also increasingly affecting the digital areas of our lives. Some of the associated problems can be addressed by computer science, and some of these specifically by data-driven research. To do so, however, requires to solve open issues related to archive quality and the large volume and variety of the data contained. This dissertation contributes data, algorithms, and concepts towards leveraging the big data and temporal provenance capabilities of web archives to tackle societal challenges. We selected three such challenges that highlight the central issues of archive quality, data volume, and data variety, respectively: (1) For the preservation of digital culture, this thesis investigates and improves the automatic quality assurance of the web page archiving process, as well as the further processing of the resulting archive data for automatic analysis. (2) For the critical assessment of information, this thesis examines large datasets of Wikipedia and news articles and presents new methods for automatically determining quality and bias. (3) For digital security and privacy, this thesis exploits the variety of content on the web to quantify the security of mnemonic passwords and analyzes the privacy-aware re-finding of the various seen content through private web archives. N2 - Mit der wachsenden Bedeutung des World Wide Webs betreffen die großen Herausforderungen unserer Gesellschaft zunehmend auch die digitalen Bereiche unseres Lebens. Einige der zugehörigen Probleme können durch die Informatik, und einige von diesen speziell durch datengetriebene Forschung, angegangen werden. Dazu müssen jedoch offene Fragen im Zusammenhang mit der Qualität der Archive und der großen Menge und Vielfalt der enthaltenen Daten gelöst werden. Diese Dissertation trägt mit Daten, Algorithmen und Konzepten dazu bei, die große Datenmenge und temporale Protokollierung von Web-Archiven zu nutzen, um gesellschaftliche Herausforderungen zu bewältigen. Wir haben drei solcher Herausforderungen ausgewählt, die die zentralen Probleme der Archivqualität, des Datenvolumens und der Datenvielfalt hervorheben: (1) Für die Bewahrung der digitalen Kultur untersucht und verbessert diese Arbeit die automatische Qualitätsbestimmung einer Webseiten-Archivierung, sowie die weitere Aufbereitung der dabei entstehenden Archivdaten für automatische Auswertungen. (2) Für die kritische Bewertung von Information untersucht diese Arbeit große Datensätze an Wikipedia- und Nachrichtenartikeln und stellt neue Verfahren zur Bestimmung der Qualität und Einseitigkeit/Parteilichkeit vor. (3) Für die digitale Sicherheit und den Datenschutz nutzt diese Arbeit die Vielfalt der Inhalte im Internet, um die Sicherheit von mnemonischen Passwörtern zu quantifizieren, und analysiert das datenschutzbewusste Wiederauffinden der verschiedenen gesehenen Inhalte mit Hilfe von privaten Web-Archiven. KW - Informatik KW - Internet KW - Web archive Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220622-46602 ER - TY - THES A1 - Pereyra, Ailén Suyai T1 - Continuidades, tensiones y rupturas en las prácticas del habitar, en el marco de las transformaciones de barrios ‘tradicionales’. El Caso de barrio Güemes 2000-2016 T1 - Continuities, tensions and breakdowns in the inhabit practices, in the framework of the transformations of 'traditional' neighborhoods. The case of Güemes neighborhood 2000-2016 N2 - El presente trabajo se inscribe en el campo de los estudios urbanos y plantea como ejes estructurantes la intersección entre las políticas públicas, el barrio y las prácticas del habitar (de Certeau, 1996, 1999; Gravano, 2003) en el marco de las transformaciones del espacio urbano en los barrios pericentrales, también denominados tradicionales de la ciudad de Córdoba, particularmente lo acontecido en Barrio Güemes, durante el periodo 2010-2016. El propósito del abordaje se inscribe en conocer y realizar aportes generalizables a la comprensión de las prácticas del habitar como unidad de análisis. En ese marco, el problema de investigación se formula en el siguiente interrogante: ¿cómo se modifican las prácticas del habitar en el marco de las transformaciones urbanas, en un modo de producción capitalista? Se entiende a las prácticas como acciones elementales de las “artes de hacer” que las personas ordinarias ponen en marcha en su vida cotidiana: para circular, cocinar, trabajar, vincularse. También, a través de las mismas resignifican los espacios, les otorgan una valoración (positiva o negativa), se identifican como parte de la identidad y a su vez se reconocen lugares de (des)encuentro y vías de circulación. Para su abordaje se toma como unidad de estudio el caso de barrio Güemes. El recorte espacial (o físico) del trabajo empírico está localizado en la ciudad de Córdoba, y se sitúa en la periferia del área central. Esta localización permite comprender el surgimiento de las primeras expansiones urbanas como consecuencia del crecimiento demográfico y cómo estas, se transformaron en los primeros barrios. El recorte temporal se encuentra delimitado entre los años 2000 y 2016, respaldado intencionalmente por dos acontecimientos significativos: el censo de población (2001) y la celebración del Bicentenario de la Independencia en Argentina. Los cambios materializados en ciertos espacios urbanos, tanto en ciudades latinoamericanas (Buenos Aires, Salvador de Bahía en Brasil, México Distrito Federal, etc.) como en otras partes del mundo (New Orleans en los Estados Unidos, el distrito de Kreuzberg- Friedrichshain en Berlín, el puerto de Hamburgo en Alemania, etc.) demuestran cómo estos espacios se van transformado acorde al modo de reproducción capitalista. Pues, se trataba de espacios que en algún momento cumplieron funciones económicas-sociales jerarquizadas y luego por la dinámica misma del capitalismo, la sobreacumulación, dejan de ser rentables y pasan a ser espacios “obsoletos”. En ese sentido, la omisión de acciones públicas y/o privadas, la desatención y el crecimiento de situaciones sociales conflictivas (delitos, inseguridad, degradación) en estos espacios, funciona como argumento para que los gobiernos locales comiencen a planear el futuro y modernizarlos. De esta manera, se plantean políticas urbanas con el objetivo de impulsar acciones de renovación o rehabilitación para dinamizar económicamente determinados sectores. Dos elementos discursivos aparecen como posibilitadores del proceso de renovación urbana: el turismo y el patrimonio. En ese sentido, bajo la recuperación patrimonial de ciertos lugares se dinamizan los territorios, por lo que el turismo se vuelve una herramienta económica que produce un excedente de plusvalía. La puesta en valor de bienes tangibles e intangibles atrae la afluencia de visitantes y, a la vez, es rentable económicamente. Ahora bien, muchas veces los proyectos tienen en cuenta las variables morfológicas y físicas, dejando en un segundo plano el impacto en el espacio próximo y las relaciones entre los habitantes con su territorio. Actualmente los espacios elegidos por los municipios para la intervención pública y/o privada son los barrios, puesto que son espacios cercanos al centro y considerados estratégicos. Por lo general, el argumento es la necesidad de rehabilitar/renovar zonas poco aprovechadas o degradadas con el objetivo de mejorar la calidad de vida de la población y dinamizar el sector (Brites, 2017; Guevara, 2012). Desde los 2000 el barrio Güemes asiste a un proceso de crecimiento inusitado. La cantidad de artesanos se disparó y variedad de productos ofrecidos, emergieron los comercios que forman parte de la oferta comercial, gastronómica y cultural del barrio. Hace varios años, presenta nuevos actores económicos que se pueden observar en la apertura de galerías comerciales; ubicadas sobre el eje de las calles Belgrano, Achával Rodríguez, Fructuoso Rivera y la creciente aparición de edificaciones alrededor de la feria artesanal histórica; con la venta y exposición de piezas del arte plástico, gastronomía, negocios de diseñadores cordobeses y hasta la inclusión de la idea del del “desarrollo sustentable” en los techos de las galerías. La modificación del corpus normativo, la aparición de edificación en altura y el boom económico tuvieron como resultado, la valorización del suelo urbano, la retroalimentación en el espacio con el emplazamiento de nuevas actividades comerciales y servicios culturales. A la par, en el espacio barrial se presentan nuevos residentes con otros hábitos y prácticas que ponen en disputa los modos de habitar en el espacio. A riesgo de simplificar, estas transformaciones fueron producto de los cambios políticoideológicos, de los modelos e instrumentos de gestión urbana puestos en juego en los diversos momentos históricos y de las propias prácticas sociales y culturales de los habitantes. De esta manera, se centrará la mirada analítica en las transformaciones de las prácticas del habitar de los pobladores de los Barrios Güemes, en el marco de la metamorfosis del espacio urbano (atravesado por tendencias de mediatización y mercantilización de la experiencia) que conjugó un proceso de intersección y asociatividad entre políticas públicas y expansión inmobiliaria. N2 - This work is part of the field of urban studies and proposes as structuring axes the intersection between public policies, the neighborhood and the inhabit practices (de Certeau, 1996, 1999; Gravano, 2003) in the framework of the transformations of the urban space in the pericentral neighborhoods, also known as traditional neighborhoods in the city of Córdoba, particularly what happened in Barrio Güemes, during the period 2010-2016. The purpose of the approach is inscribed in knowing and making generalizable contributions to the understanding of the inhabit practices as a unit of analysis. In this framework, the research problem is formulated in the following question: how are living practices modified in the framework of urban transformations, in a capitalist mode of production? The practices are understood as elementary actions of the "arts of doing" that ordinary people implement in their daily lives: to circulate, to cook, to work, to connect. Also, through them they resignify the spaces, give them an assessment (positive or negative), identify themselves as part of the identity and, in turn, recognize places of (dis) encounter and circulation path. For this approach, the case of Güemes neighborhood is taken as a unit of study. The spatial (or physical) clipping of the empirical work is located in the city of Córdoba, and is located on the periphery of the central area. This location allows us to understand the emergence of the first urban expansions as a consequence of demographic growth and how these were transformed into the first neighborhoods. The temporary cut is delimited between the years 2000 and 2016, intentionally supported by two significant events: the population census (2001) and the celebration of the Bicentenario de la Independencia de Argentina (Bicentennial of Independence in Argentina). The changes materialized in certain urban spaces, both in Latin American cities (Buenos Aires, Salvador de Bahía in Brazil, Mexico City, etc.) and in other parts of the world (New Orleans in the United States, the district of Kreuzberg-Friedrichshain in Berlin, the port of Hamburg in Germany, etc.) demonstrate how these spaces are transformed according to the capitalist mode of reproduction. Since these were spaces that at some point fulfilled hierarchical economic- social functions and later, due to the very dynamics of capitalism, the over-accumulation, they stopped being profitable and became “obsolete” spaces. In this sense, the omission of public and / or private actions, the neglect and growth of conflictive social situations (crime, insecurity, degradation) in these spaces, works as an argument for local governments to start planning the future and modernizing them. In this way, urban policies are proposed with the aim of promoting renovation or rehabilitation actions to economically boost certain sectors. Two discursive elements appear as enablers of the urban renewal process: tourism and patrimony. In this sense, under the patrimonial recovery of certain places, the territories are made more dynamic, so that tourism becomes an economic tool that produces an excess of surplus value. The punt in value of tangible and intangible assets attracts the influx of visitors and, at the same time, is economically profitable. However, projects often take into account morphological and physical variables, leaving in the background the impact on the nearby space and the relationships between the inhabitants and their territory. Currently the spaces chosen by the municipalities and for public and/or private intervention are the neighborhoods, since they are spaces close to the center and considered strategic. In general, the argument is the need to rehabilitate or renovate little-used or degraded areas in order to improve the quality of life of the population and boost the sector (Brites, 2017; Guevara, 2012). Since the 2000s, the neighborhood has witnessed an unusual growth process. The number of craftsmen skyrocketed and the variety of products offered, the businesses that are part of the commercial, gastronomic and cultural offer of the neighborhood emerged. For several years, it has introduced new economic actors that can be observed in the opening of commercial galleries; located on the axis of the streets Belgrano, Achával Rodríguez, Fructuoso Rivera and the growing appearance of buildings around the historic artisan fair; where it is sold and exhibited different pieces of plastic art, gastronomy, businesses of cordobes designers and even the inclusion of the idea of "sustainable development" in the ceilings of the galleries. The modification of the normative corpus, the appearance of high-rise buildings and the economic boom resulted in: the valorization of urban land, feedback in space with the location of new commercial activities and cultural services. At the same time, new residents appeared in the neighborhood space with other habits and practices that dispute the ways of living in the place. At the risk of simplification, these transformations were the product of the political-ideological changes, of the urban management models and instruments put into play in the various historical moments, and of the inhabitants' own social and cultural practices. In this way, the analytical look will focus on the transformations of the inhabitat practices of the residents of the Güemes neighbourhood, within the framework of the metamorphosis of the urban space (crossed by tendencies of mediatization and commercialization of the experience) that combined a process of intersection and associativity between public policies and real estate expansion. KW - Stadtviertel KW - Kommerzialisierung KW - barrio KW - Políticas públicas KW - Transformaciones urbanas KW - prácticas del habitar KW - mercantilización KW - Stadtumbau KW - Wohnen Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220524-46511 UR - https://rdu.unc.edu.ar/handle/11086/21959 ER - TY - THES A1 - Partschefeld, Stephan T1 - Synthese von Fließmitteln aus Stärke und Untersuchung der Wechselwirkung mit Portlandzement N2 - Das Ziel dieser Arbeit war es, neuartige Fließmittel auf Basis von Stärke als nachwachsenden Rohstoff zu synthetisieren und die Wechselwirkung mit Portlandzement zu charakterisieren. Die Notwendigkeit, Alternativen zu synthetischen Zusatzmittel zu erforschen, ergibt sich aus der benötigten Menge zur Verarbeitung von ca. 4,1 Gt/a, wobei ca. 85 % der Zusatzmittel auf die Fließmittel entfallen. Um Fließmittel aus Stärke zu synthetisieren, wurden drei Basisstärken unterschiedlicher Herkunft verwendet. Es wurde eine Maniokstärke mit einer niedrigen Molekularmasse und eine Weizenstärke mit einer hohen Molekularmasse verwendet. Darüber hinaus wurde eine Kartoffelstärke mit einer mittleren Molekularmasse, die ein Abfallprodukt der kartoffelverarbeitenden Industrie darstellt, genutzt. Die Stärkefließmittel wurden durch chemische Modifikation in einem zweistufigen Prozess synthetisiert. Im ersten Schritt wurde das Molekulargewicht der Weizen- und Kartoffelstärke durch säurehydrolytischen Abbau verringert. Für die kurzkettige Maniokstärke war eine Degradation der Molekularmasse nicht notwendig. Im zweiten Syntheseschritt wurden anionische Ladungen durch das Versetzen der degradierten Stärken und Maniokstärke mit Natriumvinylsulfonat in die Stärkemoleküle eingeführt. Beurteilung der Synthesemethode zur Erzeugung von Stärkefließmitteln In diesem Zusammenhang sollten molekulare Parameter der Stärkefließmittel gezielt eingestellt werden, um eine Fließwirkung im Portlandzement zu erhalten. Insbesondere die Molekularmasse und die Menge anionischer Ladungen sollte variiert werden, um Abhängigkeiten mit der Dispergierleistung zu identifizieren. 1. Es konnte durch GPC-Messungen gezeigt werden, dass die Molekularmasse der langkettigen Weizenstärke durch die gewählten Modifizierungsbedingungen zum säurehydrolytischen Abbau verringert werden konnte. Durch Variation der säurehydrolytischen Bedingungen wurden 4 degradierte Weizenstärken erzeugt, die eine Reduzierung der Molekularmasse um 27,5 – 43 % aufwiesen. Die Molekularmasse der Kartoffelstärke konnte durch säurehydrolytischen Abbau um ca. 26 % verringert werden. 2. Durch PCD-Messungen wurde gezeigt, dass anionische Ladungen durch Sulfoethylierung der freien Hydroxylgruppen in die degradierten Stärken eingeführt werden konnten. Durch Variation der Dauer der Sulfoethylierung konnte die Menge der anionischen Ladungen gesteuert und gezielt variiert werden, so dass Stärkefließmittel mit steigender Ladungsmenge in folgender Reihenfolge synthetisiert wurden: W-3 < W-2 < K-1 < W¬-4 < W¬1 < M-1 Im Ergebnis der chemischen Modifizierung konnten 6 Stärkefließmittel mit variierten Molekularmassen und anionischen Ladungen erzeugt werden. Es konnte gezeigt werden, dass die Herkunft der Stärke für die chemische Modifizierung unerheblich ist. Die Fließmittel lagen synthesebedingt als basische, wässrige Suspensionen mit Wirkstoffgehalten im Bereich von 23,5 – 50 % vor. Beurteilung der Dispergierleistung der synthetisierten Stärkefließmittel Die Dispergierperformance wurde durch rheologische Experimente mit einem Rotationsviskosimeter erfasst. Dabei wurden der Einfluss auf die Fließkurven und die Viskositätskurven betrachtet. Durch Vergleich der Dispergierleistung mit einem Polykondensat- und einem PCE-Fließmittel konnte eine Einordnung und Bewertung der Fließmittel vorgenommen werden. 3. Die rheologische Experimente haben gezeigt, dass die Stärkefließmittel eine vergleichbar hohe Dispergierleistung aufweisen, wie das zum Vergleich herangezogen PCE-Fließmittel. Darüber hinaus zeigte sich, dass die Fließwirkung der 6 Stärkefließmittel gegenüber dem Polykondensatfließmittel deutlich höher ist. Das aus der Literatur bekannte Einbrechen der Dispergierleistung der Polykondensat-fließmittel bei w/z-Werten < 0,4 konnte bestätigt werden. 4. Alle 6 Stärkefließmittel führten zu einer Verringerung der Fließgrenze und der dynamischen Viskosität des Zementleimes bei einem w/z-Wert von 0,35. 5. Der Vergleich der Dispergierleistung der Stärkefließmittel untereinander zeigte, dass die anionische Ladungsmenge einen Schlüsselparameter darstellt. Die Stärkefließmittel M-1, K-1, W-1 und W-4 mit anionischen Ladungsmengen > 6 C/g zeigten die höchste Dispergier¬performance. Die vergleichend herangezogenen klassischen Fließmittel wiesen anionische Ladungsmengen im Bereich von 1,2 C/g (Polycondensat) und 1,6 C/g (PCE) auf. Die Molekularmasse schien für die Dispergierleistung zunächst unerheblich zu sein. Aus diesem Grund wurde die Basisweizenstärke erneut chemisch modifiziert, indem anionische Ladungen eingeführt wurden, ohne die Molekularmasse jedoch zu verringern. Das Stärkederivat wies verdickende Eigenschaften im Zementleim auf. Daraus konnte geschlussfolgert werden, dass eine definierte Grenzmolekularmasse (150.000 Da) existiert, die unterschritten werden muss, um Fließmittel aus Stärke zu erzeugen. Des Weiteren zeigen die Ergebnisse, dass durch die chemische Modifizierung sowohl Fließmittel als auch Verdicker aus Stärke erzeugt werden können. Beurteilung der Beeinflussung der Hydratation und der Porenlösung des Portlandzementes Aus der Literatur ist bekannt, dass Fließmittel die Hydratation von Portlandzement maßgeblich beeinflussen können. Aus diesem Grund wurden kalorimetrische und konduktometrische Untersuchungen an Zementsuspensionen, die mit den synthetisierten Stärkefließmitteln versetzt wurden, durchgeführt. Ergänzt wurden die Untersuchungen durch Porenlösungsanalysen zu verschiedenen Zeitpunkten der Hydratation. 6. Die kalorimetrischen Untersuchungen zur Beeinflussung der Hydratation des Portlandzementes zeigten, dass die dormante Periode durch die Zugabe der Stärkefließmittel z.T. erheblich verlängert wird. Es konnte gezeigt werden, dass, je höher die anionische Ladungsmenge der Stärkefließmittel ist, desto länger dauert die dormante Periode andauert. Darüber hinaus zeigte sich, dass eine niedrige Molekularmasse der Stärkefließmittel die Verlängerung der dormanten Periode begünstigt. 7. Durch die konduktometrischen Untersuchungen konnte gezeigt werden, dass alle Stärkefließmittel die Dauer des freien- und diffusionskontrollierten CSH-Phasenwachstums verlangsamen. Insbesondere die Ausfällung des Portlandits, welches mit dem Erstarrungsbeginn korreliert, erfolgt zu deutlich späteren Zeitpunkten. Des Weiteren korrelierten die konduktometrischen Untersuchungen mit der zeitlichen Entwicklung der Calciumkonzentration der Porenlösungen. Der Vergleich der Stärkefließmittel untereinander zeigte, dass die Molekularmasse ein Schlüsselparameter ist. Das Stärkefließmittel M-1 mit der geringsten Molekularmasse, welches geringe Mengen kurzkettiger Anhydroglucoseeinheiten aufweist, verzögert die Hydratphasenbildung am stärksten. Diese Wirkung ist vergleichbar mit der von Zuckern. Darüber hinaus deuteten die Ergebnisse daraufhin, dass die Stärkefließmittel auf den ersten Hydratationsprodukten adsorbieren, wodurch die Hydratphasenbildung verlangsamt wird. Die kalorimetrischen und konduktometrischen Daten sowie die Ergebnisse der Porenlösungsanalytik des Zementes, erforderten eine genauere Betrachtung der Beeinflussung der Hydratation der Klinkerphasen C3A und C3S, durch die Stärkefließmittel. Demzufolge wurden die Untersuchungen mit den Klinkerphasen C3A und C3S in Analogie zum Portlandzement durchgeführt. Beurteilung der Beeinflussung der Hydratation und der Porenlösung des C3A Während die kalorimetrischen Untersuchungen zur C3A-Hydratation eine Tendenz zur verlangsamten Hydratphasenbildung durch die Stärkefließmittel aufzeigten, lieferten die konduktometrischen Ergebnisse grundlegende Erkenntnisse zur Beeinflussung der C3A-Hydratation. Das Stadium I der C3A-Hydratation ist durch einen Abfall der elektrischen Leitfähigkeit geprägt. Dies korreliert mit dem Absinken der Calciumionenkonzentration und dem Anstieg der Aluminiumionenkonzentration in der Porenlösung der C3A-Suspensionen. Im Anschluss an das Stadium I bildet sich ein Plateau in den elektrischen Leitfähigkeitskurven aus. 8. Es konnte gezeigt werden, dass die Stärkefließmittel das Stadium I der C3A-Hydratation, d.h. die Auflösung und Bildung erster Calciumaluminathydrate verlangsamen. Insbesondere die Stärkefließmittel mit höherer Molekularmasse erhöhten die Dauer des Stadium I. Das Stadium II wird durch die Stärkefließmittel in folgender Reihenfolge am stärksten verlängert: M-1 > W-3 > K-1 > W-2 ≥ W-4 und verdeutlicht, dass keine Abhängigkeit von der anionischen Ladungsmenge identifiziert werden konnte. Die Ergebnisse zeigten, dass speziell die kurzkettige Stärke M-1, das Stadium II länger aufrechterhalten. 9. Das Stadium III und IV der C3A-Hydratation wird insbesondere durch die Stärkefließmittel mit höherer Molekularmasse verlängert. Die Ergebnisse der Porenlösungsanalytik korrelieren mit den Ergebnissen der elektrischen Leitfähigkeit. Speziell die zeitlichen Verläufe der Calciumionenkonzentration bildeten die Verläufe der Konduktivitätskurven der C3A-Hydratation mit großer Übereinstimmung ab. Beurteilung der Beeinflussung der Hydratation und der Porenlösung des C3S Die Ergebnisse der kalorimetrischen Untersuchungen zur Beeinflussung der C3S-Hydratation durch die Stärkefließmittel zeigen, dass diese maßgeblich verlangsamt wird. Das Maximum des Haupthydratationspeaks wird zu späteren Zeiten verschoben und auch die Höhe des Maximums wird deutlich verringert. Durch die konduktometrischen Experimente wurde aufgeklärt, welche Stadien der C3S-Hydrataion beeinflusst wurden. 10. Es konnte gezeigt werden, dass sowohl die Menge der eingebrachten anionischen Ladungen als auch das Vorhandensein sehr kleiner Stärkefließmittelmoleküle (Zucker), Schlüsselparameter der verzögerten Hydratationskinetik des C3S sind. Der grundlegende Mechanismus der Hydratationsverzögerung beruht auf einer Kombination aus verminderter CSH-Keimbildung und Adsorptionsprozessen auf den ersten gebildeten CSH-Phasen der C3S-Partikel. Beurteilung des Adsorptionsverhaltens am Zement, C3A und C3S Die Bestimmung des Adsorptionsverhaltens der Stärkefließmittel erfolgte mit der Phenol-Schwefelsäure-Methode an Zement,- C3A- und C3S-Suspensionen. Durch den Vergleich der Adsorptionsraten und Adsorptionsmengen in Abhängigkeit von den molekularen Parametern der Stärkefließmittel wurde ein Wechselwirkungsmodell identifiziert. 11. Die Ursache für die hohe Dispergierleistung der Stärkefließmittel liegt in Adsorptionsprozessen an den ersten gebildeten Hydratphasen des Zementes begründet. Die Molekularmasse der Stärkefließmittel ist ein Schlüsselparameter der entscheidend für den Mechanismus der Adsorption ist. Während anionische, langkettige Stärken an mehreren Zementpartikeln gleichzeitig adsorbieren und für eine Vernetzung der Zementpartikel untereinander sorgen (Verdickerwirkung), adsorbieren kurzkettige anionische Stärken lediglich an den ersten gebildeten Hydratphasen der einzelnen Zementpartikel und führen zu elektrostatischer Abstoßung (Fließmittelwirkung). 12. Es konnte gezeigt werden, dass die Stärkefließmittel mit geringerem Molekulargewicht bei höheren Konzentrationen an den Hydratphasen des Zementes adsorbieren. Die Stärkefließmittel mit höherer Molekularmasse erreichen bei einer Zugabemenge von 0,7 % ein Plateau. Daraus wird geschlussfolgert, dass die größeren Fließmittelmoleküle einen erhöhten Platzbedarf erfordern und zur Absättigung der hydratisierenden Oberflächen bei geringeren Zugabemengen führen. Darüber hinaus konnte gezeigt werden, dass die Stärkefließmittel mit höherer anionischer Ladungsmenge zu höheren Adsorptionsmengen auf den Zement-, C3A- und C3S-Partikeln führen. 13. Die Adsorptionsprozesse finden an den ersten gebildeten Hydratphasen der C3A-Partikel statt, wodurch sowohl die Auflösung des C3A als auch die Bildung der Calciumhydroaluminate verlangsamt wird. Darüber hinaus wurde festgestellt, dass die Verlangsamung des freien- und diffusionskontrollierten Hydratphasenwachstums des C3S, durch die Adsorption der Stärkefließmittel auf den ersten gebildeten CSH-Phasen hervorgerufen wird. Des Weiteren wurde festgestellt, dass sehr kleine zuckerähnliche Moleküle in der kurzkettigen Maniokstärke in der Lage sind, die Bildung der ersten CSH-Keime zu unterdrücken. Dadurch kann die langanhaltende Plateauphase der elektrischen Leitfähigkeit der C3S-Hydratation erklärt werden. Beurteilung der Porenstruktur- und Festigkeitsausbildung Die Beurteilung der Qualität der Mikrostruktur erfolgte durch die Bestimmung der Rohdichte und der Porenradienverteilung mit Hilfe der Quecksilberhochdruckporosimetrie. Durch das Versetzen der Zementleime mit den Stärkefließmitteln konnten bei gleichbleibender Verarbeitbarkeit Zementsteinprobekörper mit einem um 17,5 % geringeren w/z-Wert von 0,35 hergestellt werden. Die Absenkung des w/z-Wertes führt zu einem Anstieg der Rohdichte des Zementsteins. 14. Durch die Zugabe der Stärkefließmittel und den verringerten w/z-Wert wird die Porenstruktur der Zementsteinproben im Vergleich zum Referenzzementstein verfeinert, da die Gesamtporosität sinkt. Insbesondere der Kapillarporenanteil wird verringert und der Gelporenanteil erhöht. Im Unterschied zu den PCE-Fließmitteln führt die Zugabe der Stärkefließmittel zu keinem erhöhten Eintrag von Luftporen. Dies wiederum hat zur Folge, dass bei der Verwendung der Stärkefließmittel auf Entschäumer verzichtet werden kann. 15. Entsprechend der dichteren Zementsteinmatrix wurden für die Zementsteine mit den Stärkefließmitteln nach 7 d und 28 d, erhöhte Biegezug- und Druckfestigkeiten ermittelt. Insbesondere die 28 d Druckfestigkeit wurde durch den verringerten w/z-Wert um die Faktoren 3,5 - 6,6 erhöht. KW - Zusatzmittel KW - Fließmittel KW - Stärkefließmittel KW - Zementhydratation KW - Synthese KW - Bauchemie KW - Betonverflüssiger Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220505-46402 ER - TY - THES A1 - Schnös, Christian Emanuel T1 - Handlungsressourcen von zivilgesellschaftlichen Akteuren in Planungsprozessen BT - Untersucht an den Beispielen der Berliner Mauerparkserweiterung und des Baugebietes "So Berlin!", Berlin N2 - Diese Dissertation untersucht Handlungsressourcen von zivilgesellschaftlichen Akteuren in Planungsprozessen um innerstädtische Planungsverfahren. Den theoretischen Rahmen bilden die Kapitalarten von Pierre Bourdieu, die zusammen mit dem Matrixraum von Dieter Läpple zu einem neuen Feldbegriff des ‚Raumfeldes‘ zusammengeführt und operationalisiert wurden. Es handelt sich um eine qualitative Arbeit, die zwischen Stadtsoziologie und Urbanistik zu verorten ist. Als Fallbeispiele wurde die Erweiterung des Berliner Mauerparks sowie das Baugebiet „So! Berlin“ in Berlin gewählt. KW - Zivilgesellschaft KW - Stadtforschung KW - Empirische Sozialforschung KW - Ressourcen KW - Urbanistik KW - Beteiligungsforschung KW - Relationale Raummodelle Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220505-46346 ER - TY - THES A1 - Liu, Bokai T1 - Stochastic multiscale modeling of polymeric nanocomposites using Data-driven techniques N2 - In recent years, lightweight materials, such as polymer composite materials (PNCs) have been studied and developed due to their excellent physical and chemical properties. Structures composed of these composite materials are widely used in aerospace engineering structures, automotive components, and electrical devices. The excellent and outstanding mechanical, thermal, and electrical properties of Carbon nanotube (CNT) make it an ideal filler to strengthen polymer materials’ comparable properties. The heat transfer of composite materials has very promising engineering applications in many fields, especially in electronic devices and energy storage equipment. It is essential in high-energy density systems since electronic components need heat dissipation functionality. Or in other words, in electronic devices the generated heat should ideally be dissipated by light and small heat sinks. Polymeric composites consist of fillers embedded in a polymer matrix, the first ones will significantly affect the overall (macroscopic) performance of the material. There are many common carbon-based fillers such as single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT), carbon nanobuds (CNB), fullerene, and graphene. Additives inside the matrix have become a popular subject for researchers. Some extraordinary characters, such as high-performance load, lightweight design, excellent chemical resistance, easy processing, and heat transfer, make the design of polymeric nanotube composites (PNCs) flexible. Due to the reinforcing effects with different fillers on composite materials, it has a higher degree of freedom and can be designed for the structure according to specific applications’ needs. As already stated, our research focus will be on SWCNT enhanced PNCs. Since experiments are timeconsuming, sometimes expensive and cannot shed light into phenomena taking place for instance at the interfaces/interphases of composites, they are often complemented through theoretical and computational analysis. While most studies are based on deterministic approaches, there is a comparatively lower number of stochastic methods accounting for uncertainties in the input parameters. In deterministic models, the output of the model is fully determined by the parameter values and the initial conditions. However, uncertainties in the input parameters such as aspect ratio, volume fraction, thermal properties of fiber and matrix need to be taken into account for reliable predictions. In this research, a stochastic multiscale method is provided to study the influence of numerous uncertain input parameters on the thermal conductivity of the composite. Therefore, a hierarchical multi-scale method based on computational homogenization is presented in to predict the macroscopic thermal conductivity based on the fine-scale structure. In order to study the inner mechanism, we use the finite element method and employ surrogate models to conduct a Global Sensitivity Analysis (GSA). The SA is performed in order to quantify the influence of the conductivity of the fiber, matrix, Kapitza resistance, volume fraction and aspect ratio on the macroscopic conductivity. Therefore, we compute first-order and total-effect sensitivity indices with different surrogate models. As stochastic multiscale models are computational expensive, surrogate approaches are commonly exploited. With the emergence of high performance computing and artificial intelligence, machine learning has become a popular modeling tool for numerous applications. Machine learning (ML) is commonly used in regression and maps data through specific rules with algorithms to build input and output models. They are particularly useful for nonlinear input-output relationships when sufficient data is available. ML has also been used in the design of new materials and multiscale analysis. For instance, Artificial neural networks and integrated learning seem to be ideally for such a task. They can theoretically simulate any non-linear relationship through the connection of neurons. Mapping relationships are employed to carry out data-driven simulations of inputs and outputs in stochastic modeling. This research aims to develop a stochastic multi-scale computational models of PNCs in heat transfer. Multi-scale stochastic modeling with uncertainty analysis and machine learning methods consist of the following components: -Uncertainty Analysis. A surrogate based global sensitivity analysis is coupled with a hierarchical multi-scale method employing computational homogenization. The effect of the conductivity of the fibers and the matrix, the Kapitza resistance, volume fraction and aspect ratio on the ’macroscopic’ conductivity of the composite is systematically studied. All selected surrogate models yield consistently the conclusions that the most influential input parameters are the aspect ratio followed by the volume fraction. The Kapitza Resistance has no significant effect on the thermal conductivity of the PNCs. The most accurate surrogate model in terms of the R2 value is the moving least square (MLS). -Hybrid Machine Learning Algorithms. A combination of artificial neural network (ANN) and particle swarm optimization (PSO) is applied to estimate the relationship between variable input and output parameters. The ANN is used for modeling the composite while PSO improves the prediction performance through an optimized global minimum search. The thermal conductivity of the fibers and the matrix, the kapitza resistance, volume fraction and aspect ratio are selected as input parameters. The output is the macroscopic (homogenized) thermal conductivity of the composite. The results show that the PSO significantly improves the predictive ability of this hybrid intelligent algorithm, which outperforms traditional neural networks. -Stochastic Integrated Machine Learning. A stochastic integrated machine learning based multiscale approach for the prediction of the macroscopic thermal conductivity in PNCs is developed. Seven types of machine learning models are exploited in this research, namely Multivariate Adaptive Regression Splines (MARS), Support Vector Machine (SVM), Regression Tree (RT), Bagging Tree (Bag), Random Forest (RF), Gradient Boosting Machine (GBM) and Cubist. They are used as components of stochastic modeling to construct the relationship between the variable of the inputs’ uncertainty and the macroscopic thermal conductivity of PNCs. Particle Swarm Optimization (PSO) is used for hyper-parameter tuning to find the global optimal values leading to a significant reduction in the computational cost. The advantages and disadvantages of various methods are also analyzed in terms of computing time and model complexity to finally give a recommendation for the applicability of different models. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,3 KW - Polymere KW - Nanoverbundstruktur KW - multiscale KW - nanocomposite KW - stochastic KW - Data-driven Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220503-46379 ER - TY - THES A1 - Damir, Mirhan T1 - Recalling the Omitted: Exploring the Spatial Development of the Modern Industrial Legacies in Egypt. The Case of Alexandria. N2 - The modern industries of the 19th and 20th centuries had multiple effects on the spatial transformation of cities and regions. The past decade has witnessed increasing scholarly and governmental attempts toward conserving modern industrial heritage in the so-called Global North, with the goal, among others, of leveraging this heritage as a driver for urban economic development. In Egypt, the process continues to lag behind; on the one hand, this is due to the perplexing official recognition of the (in)tangible witnesses of modern industries. On the other hand, the official recognition and previous publications focus predominantly on weighing the significance of industrial structures based on their monumental architectural aesthetics. Their historical urban role and spatial attributes as part of urban heritage have yet to be seriously acknowledged. Accordingly, this hinders the integration of the extant industrial sites into the broader debate surrounding urban conservation, leaving them vulnerable to decay and destruction. This dissertation steers away from the singular investigation of selective modern industrial sites to recall their historical spatial development on a city scale. This is effected by investigating a case study - the Egyptian port city of Alexandria. With the limited secondary data available on modern industries in Alexandria, this dissertation relied predominantly on primary sources. The author collected and leveraged both quantitative and qualitative data to recontextualize modern industries in terms of their spatial dynamics, order, and rationale within cities’ transformation. By recalling historical spatial development in Alexandria, the contribution of this dissertation lies in highlighting what the author refers to as the Omitted Heritage. This is defined by the modern industries in Egypt that are intentionally, unintentionally, and forgetfully excluded in terms of physical documentation, evaluation, appreciation, and integration within urban development plans. The method used excavated the richness of the established modern industries in Alexandria in terms of their quantity and diversity, which would have otherwise remained largely forgotten. The contextualization of modern industries unveiled spatial periodization, spatial dynamics, and conceptual development. The study draws on important analytical aspects that transcend the sites’ boundaries, elevating their significance to the municipal, regional, national, and even global levels. Its recommendations for further research are also divided into those levels. N2 - Die modernen Industrien des 19. und 20. Jahrhunderts wirkten sich vielfältiger Weise auf die räumliche Transformation von Städten und Regionen aus. Im letzten Jahrzehnt gab es vermehrt wissenschaftliche und staatliche Bestrebungen, das moderne industrielle Erbe im sogenannten Globalen Norden zu bewahren, unter anderem im Hinblick auf seine Einbindung als wirtschaftlicher Treiber der Stadtentwicklung. Im direkten Vergleich weist Ägypten hier immer noch einen Rückstand auf. Dies bezieht sich einerseits auf die noch ausstehende Dokumentation der historischen Industrien sowie eine offizielle, institutionelle Anerkennung der industriellen Hinterlassenschaften. Zum anderen beschränken sich die offizielle Anerkennung sowie bisherige Publikationen überwiegend auf die Begründung der Bedeutung von Industriebauten entlang ihrer architektonischen Qualität. Die Berücksichtigung ihrer stadtgeschichtlichen Rolle und ihrer räumlichen Zusammenhänge als Teil des städtischen Erbes ist noch unerforscht. Dementsprechend erschwert dies die Einbindung der noch vorhandenen historischen Industrieanlagen in die allgemeine Debatte der Stadtentwicklung und setzt sie damit einer steigenden Gefahr von Verfall und Zerstörung aus. Diese Dissertation widmet sich der historischen räumlichen Entwicklung der modernen Industrien auf gesamtstädtischer Ebene und untersucht dies am Fallbeispiel der ägyptischen Hafenstadt Alexandria. Angesichts bisher kaum zur Verfügung stehender Sekundärliteratur über moderne Industrien in Ägypten stellen Primärquellen die wesentliche Datengrundlage der Arbeit dar. Sowohl die gesammelten quantitativen als auch die qualitativen Daten werden zur Rekontextualisierung der modernen Industrien in Bezug auf die Dynamik, Ordnung und Zweck ihrer räumlichen Strukturen innerhalb der urbanen Transformation herangezogen. In dieser Arbeit werden die modernen Industrien als „ausgelassenes Erbe (Omitted Heritage)“ bezeichnet, weil sie in Bezug auf ihre räumliche Dokumentation, Auswertung, und Integration in Stadtentwicklungsplänen absichtlich und unabsichtlich keine Berücksichtigung finden. Der Beitrag dieser Dissertation liegt daher in der Erschließung und Kategorisierung der verschiedenen modernen Industrien in Alexandria, indem ihre räumliche Verortung und Verteilung durch eine Kartierung der verfügbaren Daten sichtbar und ablesbar gemacht wurde. Daraus wird die Entwicklung der historischen räumlichen Entwicklung der Industrien lesbar. Die angewandte Methode zeigt die Vielfältigkeit der etablierten modernen Industrien in Alexandria in Form quantifizierter Zahlen und diversifizierter Typen auf. Durch die Kontextualisierung der modernen Industrien erschließt sich deren räumliche Periodisierung, räumliche Dynamik und ihre konzeptionelle Entwicklung. Diese Arbeit stützt sich auf wichtige analytische Aspekte, die über die Grenzen des einzelnen industriellen Grundstücks hinausgehen und seine Bedeutung auf städtischer, regionaler, nationaler und sogar internationaler Ebene hervorheben. Die Empfehlungen und Vorschläge für die weitere Forschung beziehen sich ebenfalls auf diese Maßstabsebenen. N2 - كان للصناعات الحديثة في القرنين التاسع عشر والعشرين تأثيرات متعددة على التطور العُمراني للمدن. شَهدت الدول الغربية بالعقد الماضي دراسات علمية مُتعددة ومجهودات حكومية متزايدة نحو الحفاظ على التراث الصناعي الحديث، بهدف توظيف هذا التراث كمحرك للتنمية الاقتصادية الحضرية. علي صعيد آخر، مازالت دولة مصر تواجه صعوبات لتخطو أولي الخطوات للحفاظ على التراث الصناعي بها. يرجع ذلك أولاً إلى الانقسام الرسمي لهذه الصناعات التابعة لحقبة تاريخية واحدة بين التعيين المصطلحي والمؤسسي كتراث أو آثار. ثانياً، ترتكز دلالات التقييم سواء من مؤسسات الدولة المصرية أو الدراسات العلمية في الغالب على القيمة المعمارية والجمالية للمباني الصناعية الكبيرة. وفي ضوء ذلك، لا يوجد توثيق علمي شامل للصناعات الي تم انشاؤها في مصر بين القرنين التاسع عشر والعشرين وكذلك الخصائص الحضارية لهذه الصناعات ودورها الشامل في تاريخ التطور العمراني للمدن كجزء من التراث العمراني. وعليه، فإن هذا يعوق دمج المواقع الصناعية القائمة في إطار النقاش المحلي والدولي حول الحفاظ على هذه الصناعات كمناطق حضرية وجزء لا يتجزأ من هوية المدينة. تهدف هذه الدراسة إلى الكشف عن الدور الحضري الشامل للصناعات التاريخية التي أسهمت في تطور العمراني على نطاق المدينة. يتم ذلك من خلال دراسة حالة مدينة الإسكندرية الساحلية. اعتمدت هذه الدراسة على المصادر الأولية بدرجة كبيرة نظراً لمحدودية المصادر الثانوية المتاحة عن تطور الصناعات الحديثة في الإسكندرية. قامت الدارسة بتشكيل قائمة للبيانات الكمية والنوعية للصناعات التي تم انشاؤها في الإسكندرية في القرنين التاسع عشر، بهدف إعادة صياغة سياق الصناعات الحديثة مستعينة بمنهجية الديناميكيات المكانية - “spatial dynamics” - من حيث التنظيم المكاني وعرض المنطق وراء توقيع وتطور الصناعات على مدار تاريخ المدينة. تكمن مساهمة هذه الدراسة في إبراز ما يشير إليه المؤلف بالموروثات المهملة – “Omitted Legacies” - من خلال تذكر تاريخ التطور المكاني للصناعات في الإسكندرية. يتم تعريف ذلك من خلال الصناعات الحديثة في مصر التي يتم اهمالها واستبعادها سواء عن قصد أو عن غير قصد من حيث توثيقها المادي وتقييمها وإدراجها ضمن خطط التنمية الحضرية. أسهمت المنهجية المُستخدمة في التنقيب عن ثراء الصناعات الحديثة القائمة في الإسكندرية، من حيث الكم والتنوع، والتي لولا ذلك كانت ستزال في طي النسيان. كشفت الدراسة على جوانب تحليلية مهمة خارج الإطار المُحدد لتقييم الصناعات التاريخية على الجانب المعماري فقط وكذلك جوانب تحليلية تتجاوز حدود المواقع، وترتقي من أهميته هذه الصناعات على المستويات المحلية والإقليمية والوطنية وحتى العالمية. تشمل توصيات هذه الدراسة استعراض الموروثات الصناعية المهملة في مصر وإعادة عرضها للتقييم علي المستويات المحلية والإقليمية والوطنية وحتى العالمية. KW - Ägypten KW - Technisches Denkmal KW - Stadtgeschichte KW - Denkmalpflege KW - Dokumentation KW - modern industries KW - Alexandria KW - urban history KW - historical spatial analysis KW - documentation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220329-46196 ER - TY - THES A1 - Malik, Irfan T1 - An adaptive contact formulation for Isogeometric Finite Element Analysis N2 - Numerical simulation of physical phenomena, like electro-magnetics, structural and fluid mechanics is essential for the cost- and time-efficient development of mechanical products at high quality. It allows to investigate the behavior of a product or a system far before the first prototype of a product is manufactured. This thesis addresses the simulation of contact mechanics. Mechanical contacts appear in nearly every product of mechanical engineering. Gearboxes, roller bearings, valves and pumps are only some examples. Simulating these systems not only for the maximal/minimal stresses and strains but for the stress-distribution in case of tribo-contacts is a challenging task from a numerical point of view. Classical procedures like the Finite Element Method suffer from the nonsmooth representation of contact surfaces with discrete Lagrange elements. On the one hand, an error due to the approximate description of the surface is introduced. On the other hand it is difficult to attain a robust contact search because surface normals can not be described in a unique form at element edges. This thesis introduces therefore a novel approach, the adaptive isogeometric contact formulation based on polynomial Splines over hierarchical T-meshes (PHT-Splines), for the approximate solution of the non-linear contact problem. It provides a more accurate, robust and efficient solution compared to conventional methods. During the development of this method the focus was laid on the solution of static contact problems without friction in 2D and 3D in which the structures undergo small deformations. The mathematical description of the problem entails a system of partial differential equations and boundary conditions which model the linear elastic behaviour of continua. Additionally, it comprises side conditions, the Karush-Kuhn-Tuckerconditions, to prevent the contacting structures from non-physical penetration. The mathematical model must be transformed into its integral form for approximation of the solution. Employing a penalty method, contact constraints are incorporated by adding the resulting equations in weak form to the overall set of equations. For an efficient space discretization of the bulk and especially the contact boundary of the structures, the principle of Isogeometric Analysis (IGA) is applied. Isogeometric Finite Element Methods provide several advantages over conventional Finite Element discretization. Surface approximation with Non-Uniform Rational B-Splines (NURBS) allow a robust numerical solution of the contact problem with high accuracy in terms of an exact geometry description including the surface smoothness. The numerical evaluation of the contact integral is challenging due to generally non-conforming meshes of the contacting structures. In this work the highly accurate Mortar Method is applied in the isogeometric setting for the evaluation of contact contributions. This leads to an algebraic system of equations that is linearized and solved in sequential steps. This procedure is known as the Newton Raphson Method. Based on numerical examples, the advantages of the isogeometric approach with classical refinement strategies, like the p- and h-refinement, are shown and the influence of relevant algorithmic parameters on the approximate solution of the contact problem is verified. One drawback of the Spline approximations of stresses though is that they lack accuracy at the contact edge where the structures change their boundary from contact to no contact and where the solution features a kink. The approximation with smooth Spline functions yields numerical artefacts in the form of non-physical oscillations. This property of the numerical solution is not only a drawback for the simulation of e.g. tribological contacts, it also influences the convergence properties of iterative solution procedures negatively. Hence, the NURBS discretized geometries are transformed to Polynomial Splines over Hierarchical T-meshes (PHT-Splines), for the local refinement along contact edges to reduce the artefact of pressure oscillations. NURBS have a tensor product structure which does not allow to refine only certain parts of the geometrical domain while leaving other parts unchanged. Due to the Bézier Extraction, lying behind the transformation from NURBS to PHT-Splines, the connected mesh structure is broken up into separate elements. This allows an efficient local refinement along the contact edge. Before single elements are refined in a hierarchical form with cross-insertion, existing basis functions must be modified or eliminated. This process of truncation assures local and global linear independence of the refined basis which is needed for a unique approximate solution. The contact boundary is a priori unknown. Local refinement along the contact edge, especially for 3D problems, is for this reason not straight forward. In this work the use of an a posteriori error estimation procedure, the Super Convergent Recovery Solution Based Error Estimation Scheme, together with the Dörfler Marking Method is suggested for the spatial search of the contact edge. Numerical examples show that the developed method improves the quality of solutions along the contact edge significantly compared to NURBS based approximate solutions. Also, the error in maximum contact pressures, which correlates with the pressure artefacts, is minimized by the adaptive local refinement. In a final step the practicability of the developed solution algorithm is verified by an industrial application: The highly loaded mechanical contact between roller and cam in the drive train of a high-pressure fuel pump is considered. KW - Isogeometrische Analyse KW - Elementanalyse KW - Isogeometric Analysis KW - Error estimation KW - adaptive contact KW - Finite Element Analysis KW - Computational contact mechanics Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220324-46129 ER - TY - THES A1 - Vogler, Verena T1 - A framework for artificial coral reef design: Integrating computational modelling and high precision monitoring strategies for artificial coral reefs – an Ecosystem-aware design approach in times of climate change N2 - Tropical coral reefs, one of the world’s oldest ecosystems which support some of the highest levels of biodiversity on the planet, are currently facing an unprecedented ecological crisis during this massive human-activity-induced period of extinction. Hence, tropical reefs symbolically stand for the destructive effects of human activities on nature [4], [5]. Artificial reefs are excellent examples of how architectural design can be combined with ecosystem regeneration [6], [7], [8]. However, to work at the interface between the artificial and the complex and temporal nature of natural systems presents a challenge, i.a. in respect to the B-rep modelling legacy of computational modelling. The presented doctorate investigates strategies on how to apply digital practice to realise what is an essential bulwark to retain reefs in impossibly challenging times. Beyond the main question of integrating computational modelling and high precision monitoring strategies in artificial coral reef design, this doctorate explores techniques, methods, and linking frameworks to support future research and practice in ecology led design contexts. Considering the many existing approaches for artificial coral reefs design, one finds they often fall short in precisely understanding the relationships between architectural and ecological aspects (e.g. how a surface design and material composition can foster coral larvae settlement, or structural three-dimensionality enhance biodiversity) and lack an integrated underwater (UW) monitoring process. Such a process is necessary in order to gather knowledge about the ecosystem and make it available for design, and to learn whether artificial structures contribute to reef regeneration or rather harm the coral reef ecosystem. For the research, empirical experimental methods were applied: Algorithmic coral reef design, high precision UW monitoring, computational modelling and simulation, and validated through parallel real-world physical experimentation – two Artificial Reef Prototypes (ARPs) in Gili Trawangan, Indonesia (2012–today). Multiple discrete methods and sub techniques were developed in seventeen computational experiments and applied in a way in which many are cross valid and integrated in an overall framework that is offered as a significant contribution to the field. Other main contributions include the Ecosystem-aware design approach, Key Performance Indicators (KPIs) for coral reef design, algorithmic design and fabrication of Biorock cathodes, new high precision UW monitoring strategies, long-term real-world constructed experiments, new digital analysis methods and two new front-end web-based tools for reef design and monitoring reefs. The methodological framework is a finding of the research that has many technical components that were tested and combined in this way for the very first time. In summary, the thesis responds to the urgency and relevance in preserving marine species in tropical reefs during this massive extinction period by offering a differentiated approach towards artificial coral reefs – demonstrating the feasibility of digitally designing such ‘living architecture’ according to multiple context and performance parameters. It also provides an in-depth critical discussion of computational design and architecture in the context of ecosystem regeneration and Planetary Thinking. In that respect, the thesis functions as both theoretical and practical background for computational design, ecology and marine conservation – not only to foster the design of artificial coral reefs technically but also to provide essential criteria and techniques for conceiving them. Keywords: Artificial coral reefs, computational modelling, high precision underwater monitoring, ecology in design. N2 - Charakteristisch für das Zeitalter des Klimawandels sind die durch den Menschen verursachte Meeresverschmutzung sowie ein massiver Rückgang der Artenvielfalt in den Weltmeeren. Tropische Korallenriffe sind als eines der ältesten und artenreichsten Ökosysteme der Erde besonders stark gefährdet und stehen somit symbolisch für die zerstörerischen Auswirkungen menschlicher Aktivitäten auf die Natur [4], [5]. Um dem massiven Rückgang der Korallenriffe entgegenzuwirken, wurden von Menschen künstliche Riffsysteme entwickelt [6], [7]. Sie sind Beispiele dafür, wie Architektur und die Regenerierung von Ökosystemen miteinander verbunden werden können [8]. Eine Verknüpfung von einerseits künstlichen und andererseits komplexen, sich verändernden natürlichen Systemen, stellt jedoch eine Herausforderung dar, u.a. in Bezug auf die Computermodellierung (B-Rep Modellierung). Zum Erhalt der Korallenriffe werden in der vorliegende Doktorarbeit Strategien aus der digitalen Praxis neuartig auf das Entwerfen von künstlichen Korallenriffen angewendet. Die Hauptfrage befasst sich damit, wie der Entwurfsprozess von künstlichen Korallenriffen unter Einbeziehung von Computermodellierung und hochpräzisen Überwachungsstrategien optimiert werden kann. In diesem Zusammenhang werden Techniken, Methoden sowie ein übergeordnetes Framework erforscht, welche zukünftige Forschung und Praxis in Bezug auf Ökologie-geleitete Entwurfsprozesse fördern soll. In Anbetracht der vielen vorhandenen künstlichen Riffsysteme, kann man feststellen, dass die Zusammenhänge zwischen Architektur- und Ökosystem-Anforderungen nicht genau untersucht und dadurch bei der Umsetzung nicht entsprechend berücksichtigt werden. Zum Beispiel wie Oberflächenbeschaffenheit und Materialität eine Ansiedlung von Korallenlarven begünstigt oder wie eine räumlich vielseitige Struktur die Artenvielfalt verbessern kann. Zudem fehlt ein integrierter Unterwasser-Überwachungsprozess, welcher Informationen über das Ökosystem liefert und diese dem Entwurf bereitstellt. Zusätzlich ist eine Unterwasser-Überwachung notwendig, um herauszufinden, ob die künstlichen Riffstrukturen zur Regenerierung beitragen oder dem Ökosystem gänzlich schaden. In dieser Forschungsarbeit werden empirische und experimentelle Methoden angewendet: Algorithmisches Entwerfen für Korallenriffe, hochpräzise Unterwasser-Überwachung, Computermodellierung und -simulation. Die Forschung wird seit 2012 bis heute durch zwei Riffprototypen (Artificial Reef Prototypes – ARPs) in Gili Trawangan, Indonesien validiert. Zusätzlich wurden weitere separate Methoden und Techniken in insgesamt siebzehn computergestützten Experimenten entwickelt und so angewendet, dass viele kreuzvalidiert und in ein Framework integriert sind, welches dann als bedeutender Beitrag dem Forschungsgebiet zur Verfügung steht. Weitere Hauptbeiträge sind der Ökosystem-bewusste Entwurfsansatz (Ecosystem-aware design approach), Key Performance Indicators (KPIs) für das Gestalten von Korallenriffen, algorithmisches Entwerfen und die Herstellung von Biorock-Kathoden, neue hochpräzise Unterwasser-Überwachungsstrategien, reale Langzeitexperimente, neue digitale Analysemethoden, sowie zwei webbasierte Softwareanwendungen für die Gestaltung und die Überwachung von künstlichen Korallenriffen. Das methodische Framework ist das Hauptergebnis der Forschung, da die vielen technischen Komponenten in dieser Weise zum ersten Mal getestet und kombiniert wurden. Zusammenfassend reagiert die vorliegende Doktorarbeit sowohl auf die Dringlichkeit als auch auf die Relevanz der Erhaltung von Artenvielfalt in tropischen Korallenriffen in Zeiten eines massiven Aussterbens, indem sie einen differenzierten Entwurfsansatz für künstliche Korallenriffe offeriert. Die Arbeit zeigt auf, dass ein digitales Entwerfen einer solchen „lebendigen Architektur“ unter Berücksichtigung vielfältiger Anforderungen und Leistungsparametern machbar ist. Zusätzlich bietet sie eine ausführliche kritische Diskussion über die Rolle von computergestützten Entwerfen und Architektur im Zusammenhang mit Regenerierung von Ökosystemen und “Planetary Thinking”. In dieser Hinsicht fungiert die Doktorarbeit als theoretischer und praktischer Hintergrund für computergestütztes Entwerfen, Ökologie und Meeresschutz. Eine Verbesserung des Entwerfens von künstlichen Korallenriffen wird nicht nur auf technischer Ebene aufgezeigt, sondern es werden auch die wesentlichen Kriterien und Techniken für deren Umsetzung benannt. Schlüsselwörter: Künstliche Korallenriffe, Computermodellierung, hochpräzise Unterwasser-Überwachung, Ökologie im Architekturentwurf. KW - Korallenriff KW - Algorithmus KW - Architektur KW - Meeresökologie KW - Software KW - Artificial coral reefs KW - Computational modelling KW - High precision underwater monitoring KW - Ecology in design KW - Künstliche Korallenriffe KW - Unterwasserarchitektur Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220322-46115 UR - https://artificialreefdesign.com/ SN - 978-3-00-074495-2 N1 - Die URL führt zu 3D Modelle von echten Korallenriffen. ER - TY - THES A1 - Fauth, Judith T1 - A process-oriented decision model for determining the permitability of construction projects N2 - In recent years, the discussion of digitalization has arrived in the media, at conferences, and in committees of the construction and real estate industry. While some areas are producing innovations and some contributors can be described as pioneers, other topics still show deficits with regard to digital transformation. The building permit process can also be counted in this category. Regardless of how architects and engineers in planning offices rely on innovative methods, building documents have so far remained in paper form in too many cases, or are printed out after electronic submission to the authority. Existing resources – for example in the form of a building information model, which could provide support in the building permit process – are not being taken advantage of. In order to use digital tools to support decision-making by the building permit authorities, it is necessary to understand the current situation and to question conditions before pursuing the overall automation of internal authority processes as the sole solution. With a substantive-organizational consideration of the relevant areas that influence building permit determination, an improvement of the building permit procedure within authorities is proposed. Complex areas – such as legal situations, the use of technology, as well as the subjective alternative action – are determined and structured. With the development of a model for the determination of building permitability, both an understanding of influencing factors is conveyed and an increase in transparency for all parties involved is created. In addition to an international literature review, an empirical study served as the research method. The empirical study was conducted in the form of qualitative expert interviews in order to determine the current state in the field of building permit procedures. The collected data material was processed and subsequently subjected to a software-supported content analysis. The results were processed, in combination with findings from the literature review, in various analyses to form the basis for a proposed model. The result of the study is a decision model that closes the gap between the current processes within the building authorities and an overall automation of the building permit review process. The model offers support to examiners and applicants in determining building permit eligibility, through its process-oriented structuring of decision-relevant facts. The theoretical model could be transferred into practice in the form of a web application. KW - Baugenehmigung KW - Entscheidungsmodell KW - Bauantrag KW - Prozessmanagement KW - Projektmanagement KW - Building permit KW - Building application KW - Decision-making KW - Process management KW - Project management Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220309-46020 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/4509 N1 - This work is a translation of the original dissertation (German language) which is accessible at: https://doi.org/10.25643/bauhaus-universitaet.4509 and deposited here as URL link. ER - TY - THES A1 - Tatarin, René T1 - Charakterisieren struktureller Veränderungen in zementgebundenen Baustoffen durch akustische zerstörungsfreie Prüfverfahren N2 - Im Rahmen dieser Arbeit wird das Charakterisieren struktureller Veränderungen zementgebundener Baustoffe durch zwei auf dem Ultraschall-Transmissionsverfahren beruhenden Methoden der zerstörungsfreien Prüfung (ZfP) mit mechanischen Wellen vorgenommen. Zur kontinuierlichen Charakterisierung der Erstarrung und Erhärtung frischer zementgebundener Systeme wird ein auf Ultraschallsensoren für Longitudinal- und Scherwellen basierendes Messsystem in Kombination mit zugehörigen Verfahrensweisen zur Datenauswertung konzipiert, charakterisiert und angewandt. Gegenüber der bislang üblichen alleinigen Bewertung der Verfestigung anhand indirekter Ultraschallparameter wie Ausbreitungsgeschwindigkeit, Signalenergie oder Frequenzgehalt der Longitudinalwelle lässt sich damit eine direkte, sensible Erfassung der sich während der Strukturbildung entwickelnden dynamischen elastischen Eigenschaften auf der Basis primärer physikalischer Werkstoffparameter erreichen. Insbesondere Scherwellen und der dynamische Schubmodul sind geeignet, den graduellen Übergang zum Festkörper mit Überschreiten der Perkolationsschwelle sensibel und unabhängig vom Luftgehalt zu erfassen. Die zeitliche Entwicklung der dynamischen elastischen Eigenschaften, die Strukturbildungsraten sowie die daraus extrahierten diskreten Ergebnisparameter ermöglichen eine vergleichende quantitative Charakterisierung der Strukturbildung zementgebundener Baustoffe aus mechanischer Sicht. Dabei lassen sich typische, oft unvermeidbare Unterschiede in der Zusammensetzung der Versuchsmischungen berücksichtigen. Der Einsatz laserbasierter Methoden zur Anregung und Erfassung von mechanischen Wellen und deren Kombination zu Laser-Ultraschall zielt darauf ab, die mit der Anwendung des konventionellen Ultraschall-Transmissionsverfahrens verbundenen Nachteile zu eliminieren. Diese resultieren aus der Sensorgeometrie, der mechanischen Ankopplung und bei einer Vielzahl von Oberflächenpunkten aus einem hohen prüftechnischen Aufwand. Die laserbasierte, interferometrische Erfassung mechanischer Wellen ist gegenüber Ultraschallsensoren rauschbehaftet und vergleichsweise unsensibel. Als wesentliche Voraussetzung der scannenden Anwendung von Laser-Ultraschall auf zementgebundene Baustoffe erfolgen systematische experimentelle Untersuchungen zur laserinduzierten ablativen Anregung. Diese sollen zum Verständnis des Anregungsmechanismus unmittelbar auf den Oberflächen von zementgebundenen Baustoffen, Gesteinskörnungen und metallischen Werkstoffen beitragen, relevante Einflussfaktoren aus den charakteristischen Materialeigenschaften identifizieren, geeignete Prozessparameter gewinnen und die Verfahrensgrenzen aufzeigen. Unter Einsatz von Longitudinalwellen erfolgt die Anwendung von Laser-Ultraschall zur zeit- und ortsaufgelösten Charakterisierung der Strukturbildung und Homogenität frischer sowie erhärteter Proben zementgebundener Baustoffe. Während der Strukturbildung wird erstmals eine simultane berührungslose Erfassung von Longitudinal- und Scherwellen vorgenommen. Unter Anwendung von tomographischen Methoden (2D-Laufzeit¬tomo¬graphie) werden überlagerungsfreie Informationen zur räumlichen Verteilung struktureller Gefügeveränderungen anhand der longitudinalen Ausbreitungsgeschwindigkeit bzw. des relativen dynamischen Elastizitätsmoduls innerhalb von virtuellen Schnittebenen geschädigter Probekörper gewonnen. Als beton-schädigende Mechanismen werden exemplarisch der kombinierte Frost-Tausalz-Angriff sowie die Alkali-Kieselsäure-Reaktion (AKR) herangezogen. Die im Rahmen dieser Arbeit entwickelten Verfahren der zerstörungsfreien Prüfung bieten erweiterte Möglichkeiten zur Charakterisierung zementgebundener Baustoffe und deren strukturellen Veränderungen und lassen sich zielgerichtet in der Werkstoffentwicklung, bei der Qualitätssicherung sowie zur Analyse von Schadensprozessen und -ursachen einsetzen. N2 - In this research, structural changes of cement-based building materials are characterized using two ultrasonic transmission-based methods of non-destructive testing (NDT) with mechanical waves. For continuous characterization of setting and hardening of fresh cementitious materials a measurement system is designed, characterized and applied based on ultrasonic compressional and shear wave transducers in combination with associated data evaluation procedures. In contrast to common non-destructive testing of setting and hardening by means of solely indirect ultrasonic parameters such as pulse velocity, signal energy or frequency content of compressional waves, a direct sensitive recording of dynamic elastic properties can be achieved during the structure formation on the basis of primary physical material parameters. Especially, shear waves and the dynamic shear modulus are suitable to capture the gradual transition to a solid with exceeding percolation threshold in a sensitive manner and independent of air content. The development of dynamic elastic properties, the structure formation rates and the extracted discrete result parameters enable a comparative and quantitative analysis of the structural formation of fresh cementitious materials from a mechanical point of view. As an advantage, often unavoidable differences in the composition of test blends can be taken into account. The application of laser-based techniques for generation and detection of mechanical waves and their combination to laser-ultrasonics eliminates the disadvantages associated with the application of conventional ultrasonic through-transmission techniques. These result from sensor geometry, mechanical coupling and, in case of numerous surface points, due to a high inspection time and effort. Furthermore, the laser-based interferometric detection of mechanical waves is noisy and relatively insensitive compared to application of ultrasonic sensors. As an essential prerequisite, systematic experimental investigations of laser-induced ablative generation are carried out for the scanning application of laser-ultrasonics on cement-based building materials. These investigations contribute to the understanding of the excitation mechanism directly on the surfaces of concrete, natural aggregates and metallic targets and to the identification of relevant influencing factors from the characteristic material properties. By gathering optimized process parameters, the limitations of laser-ultrasonics to concrete are shown. Laser-ultrasonics is applied using compressional waves for time- and space-resolved characterization of the structure formation and homogeneity of fresh and hardened specimen of cement-based building materials. During the structure formation process, the simultaneous contactless acquisition of compressional and shear waves is carried out for the first time. With the implementation of tomographic methods (2D travel-time tomography) it is possible to obtain superposition-free information on the spatial distribution of microstructural changes by means of the longitudinal ultrasonic pulse velocity or the relative dynamic modulus of elasticity within virtual cross-sections of damaged specimens. The combined freeze-thaw de-icing salt attack as well as the alkali-silica reaction (ASR) are investigated as mechanisms of concrete damage. The methods of non-destructive testing developed within the scope of this study offer extended possibilities for the characterization of cement-based building materials and their structural changes and can be applied in a targeted manner in materials development, quality control and in analysis of damage processes and causes. KW - Beton KW - Hydratation KW - Ultraschall KW - Zerstörungsfreie Werkstoffprüfung KW - Lasertechnologie KW - Laser-Ultraschall KW - elastische Parameter KW - Tomographie KW - Strukturbildung KW - Dauerhaftigkeit Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220215-45920 SN - 978-3-7369-7575-0 PB - Cuvillier Verlag CY - Göttingen ER - TY - THES A1 - Javanmardi, Leila T1 - URBANISM AND DICTATORSHIP. A Study on Urban Planning in Contemporary History of Iran, Second Pahlavi: 1941-1979 N2 - The evolution of urbanism under dictatorship forms the core of the current research. This thesis is part of a research network at Bauhaus-Universität Weimar, which studies the 20th century's urbanism under different dictatorships. The network has provided a cross-cultural and cross-border environment and has enabled the author to communicate with other like-minded researchers. The 2015 published book of this group 'Urbanism and Dictatorship: A European Perspective' strengthens the foundation of this research's theoretical and methodological framework. This thesis investigates urban policies and plans leading to the advancement of urbanization and the transformation of urban space in Iran during the second Pahlavi (1941-1979) when the country faced a milestone in its history: Nationalization of the Iranian oil industry. By reflecting the influence of economic and socio‐political determinants of the time on urbanism and the urbanization process, this work intends to critically trace the effect of dictatorship on evolved urbanism before and after the oil nationalization in 1951. The research on the second Pahlavi's urbanism has been limitedly addressed and has only recently expanded. Most of the conducted studies date back to less than a decade ago and could not incorporate all the episodes of the second Pahlavi urbanism. These works have often investigated urbanism and architecture by focusing merely on the physical features and urban products in different years regardless of the importance of urbanism as a tool in the service of hegemony. In other words, the majority of the available literature does not intend to address the socio-economic and political roots of urban transformations and by questioning 'what has been built?' investigates the individual urban projects and plans designed by individual designers without interlinking these projects to the state's urban planning program and tracing the beneficiaries of those projects or questioning 'built for whom?' Moreover, some chapters of this modern urbanism have rarely been investigated. For instance, scant research has looked into the works of foreign designers and consultants involved in the projects such as Peter Georg Ahrens or Constantinos A. Doxiadis. Similarly, the urbanism of the first decade of the second Pahlavi, including the government of Mossadegh, has mainly been overlooked. Therefore, by critically analyzing the state's urban planning program and the process of urbanization in Iran during the second Pahlavi, this research aims to bridge the literature gap and to unravel the effect of the power structure on urban planning and products while seeking to find a pattern behind the regime's policies. The main body of this work is concentrated on studying the history of urbanism in Iran, of which collecting data and descriptions played a crucial role. To prevent the limitations associated with singular methods, this research's methodology is based on methodological triangulation (Denzin, 2017). With the triangulation scheme, the data is gathered by combining different qualitative and quantitative methods such as the library, archival and media research, online resources, non-participatory observation, and photography. For the empirical part, the city of Tehran is selected as the case study. Moreover, individual non-structured interviews with the locals were conducted to gain more insights regarding urban projects. KW - Stadtplanung KW - Modernisierung KW - Autokratie KW - Segregation KW - Iran KW - Pahlavi KW - Tehran KW - Dictatorship KW - Urban Planning KW - Modernization Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220224-45971 ER - TY - THES A1 - Hartmann, Veronika T1 - Methoden zur Quantifizierung und Optimierung der Robustheit von Bauablaufplänen N2 - Bauablaufplänen kommt bei der Realisierung von Bauprojekten eine zentrale Rolle zu. Sie dienen der Koordination von Schnittstellen und bilden für die am Projekt Beteiligten die Grundlage für ihre individuelle Planung. Eine verlässliche Terminplanung ist daher von großer Bedeutung, tatsächlich sind aber gerade Bauablaufpläne für ihre Unzuverlässigkeit bekannt. Aufgrund der langen Vorlaufzeiten bei der Planung von Bauprojekten sind zum Zeitpunkt der Planung viele Informationen nur als Schätzwerte bekannt. Auf der Grundlage dieser geschätzten und damit mit Unsicherheiten behafteten Daten werden im Bauwesen deterministische Terminpläne erstellt. Kommt es während der Realisierung zu Diskrepanzen zwischen Schätzungen und Realität, erfordert dies die Anpassung der Pläne. Aufgrund zahlreicher Abhängigkeiten zwischen den geplanten Aktivitäten können einzelne Planänderungen vielfältige weitere Änderungen und Anpassungen nach sich ziehen und damit einen reibungslosen Projektablauf gefährden. In dieser Arbeit wird ein Vorgehen entwickelt, welches Bauablaufpläne erzeugt, die im Rahmen der durch das Projekt definierten Abhängigkeiten und Randbedingungen in der Lage sind, Änderungen möglichst gut zu absorbieren. Solche Pläne, die bei auftretenden Änderungen vergleichsweise geringe Anpassungen des Terminplans erfordern, werden hier als robust bezeichnet. Ausgehend von Verfahren der Projektplanung und Methoden zur Berücksichtigung von Unsicherheiten werden deterministische Terminpläne bezüglich ihres Verhaltens bei eintretenden Änderungen betrachtet. Hierfür werden zunächst mögliche Unsicherheiten als Ursachen für Änderungen benannt und mathematisch abgebildet. Damit kann das Verhalten von Abläufen für mögliche Änderungen betrachtet werden, indem die durch Änderungen erzwungenen angepassten Terminpläne simuliert werden. Für diese Monte-Carlo-Simulationen der angepassten Terminpläne wird sichergestellt, dass die angepassten Terminpläne logische Weiterentwicklungen des deterministischen Terminplans darstellen. Auf der Grundlage dieser Untersuchungen wird ein stochastisches Maß zur Quantifizierung der Robustheit erarbeitet, welches die Fähigkeit eines Planes, Änderungen zu absorbieren, beschreibt. Damit ist es möglich, Terminpläne bezüglich ihrer Robustheit zu vergleichen. Das entwickelte Verfahren zur Quantifizierung der Robustheit wird in einem Optimierungsverfahren auf Basis Genetischer Algorithmen angewendet, um gezielt robuste Terminpläne zu erzeugen. An Beispielen werden die Methoden demonstriert und ihre Wirksamkeit nachgewiesen. N2 - Construction schedules are of significant importance in the execution of building projects. As basis for individual project planning of all project stakeholders, construction schedules support the coordination of interfaces. While reliable scheduling is of particular relevance for the entire project, construction schedules are known to be notoriously unreliable. Because of long project preparations in civil engineering, information necessary for scheduling is often estimated at the time of drafting construction plans. Therefore uncertain data form the basis of deterministic schedules prepared to guide building executions. When discrepancies between assumptions and reality occur during building processes, schedules need to be adjusted. Due to many interdependencies between construction processes, certain schedule changes may lead to significant further changes and adjustments and may jeopardise a smooth project execution. This thesis develops a method to generate construction schedules that can absorb project changes while considering the interdependencies and boundary conditions imposed by the project specifics. Schedules that require comparatively small adjustments in case of project changes are referred to as robust. Based on methods for project scheduling and for representing process uncertainties, deterministic schedules are studied with respect to their behaviour under changes. Reasons for uncertainties are discussed and transferred into a mathematical description of process changes. Defining process changes mathematically allows analysing schedule adjustments arising from project changes by generating adjusted schedules in Monte Carlo simulations. In this thesis, efforts are made to ensure that schedules created by simulation are logical advancements of the respective original, deterministic schedules. Interpretations of the results of the stochastic simulations serve as basis for quantifying schedule robustness to describe the ability of a schedule to absorb changes. The definition of a robustness measure allows the comparison of schedules in terms of their robustness. The method developed herin is then employed as part of an optimisation procedure based on genetic algorithms to systematically generate robust schedules. To demonstrate their effectiveness, the methods are validated using practical examples. KW - Bauablaufplanung KW - Bauinformatik KW - Optimierung KW - Robustheit Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220204-45798 ER - TY - THES A1 - Danckwerth, Julia T1 - Strategien der Sichtbarkeit und Sichtbarmachung von ‚Wearable Enhancement‘ im Bereich Smart Health N2 - Die vorliegende Forschungsarbeit befasst sich mit der Entwicklung und Gestaltung von körpernahen, tragbaren Artefakten für den digitalisierten Gesundheitsbereich. Unter dem entwickelten Begriff des Wearable Enhancements werden die verschiedenen Termini aus smarten Textilien, Fashion Technologies, Wearable Technologies sowie elektronischen Textilien zusammengefasst und zwei zentrale Forschungsfragen untersucht. Wie kann Wearable Enhancement im Bereich Smart Health ethisch, sozial und ökologisch entwickelt und gestaltet werden? Inwiefern können textile Schnittstellen die Wahrnehmung und die Wahrnehmbarkeit des Körpers verändern? Mit der ersten Forschungsfrage sollen vorrangig Ansätze und Strategien der Sichtbarkeit für die Entwicklung und Gestaltung diskutiert werden, welche Aussagen für die Designpraxis, den Gestaltungs- und Designforschungsprozess sowie die Designlösungen selbst generieren sollen. Die zweite Forschungsfrage zielt darauf, Formen der Sichtbarmachung von sowie für Wearable Enhancement zu untersuchen. Anhand von drei konkreten Fallstudien werden wesentliche Aspekte der Rezeption, Perzeption, Konstruktion, Konfiguration und Konzeption von soziotechnischen Artefakten zur Funktionssteigerung des menschlichen Körpers untersucht und verschiedene Formen der Sichtbarkeit und Sichtbarmachung entwickelt. In der Arbeit wird ein dual-angelegter transdisziplinärer Designforschungsansatz entwickelt und praktiziert, welcher sowohl die menschlichen Bedürfnisse der Nutzer*innen als auch die Weiterentwicklung von Technologien berücksichtigt. Auf dieser Grundlage wird versucht Anregungen für ein zukunftsfähiges und zugleich verantwortungsorientiertes Design zu geben. KW - Design KW - Wearable Computing KW - Künstlerische Forschung KW - Digital Health KW - Smart Health KW - Smart Textiles KW - Designforschung KW - Wearable Technology Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220202-45768 ER - TY - THES A1 - Habtemariam, Abinet Kifle T1 - Generalized Beam Theory for the analysis of thin-walled circular pipe members N2 - The detailed structural analysis of thin-walled circular pipe members often requires the use of a shell or solid-based finite element method. Although these methods provide a very good approximation of the deformations, they require a higher degree of discretization which causes high computational costs. On the other hand, the analysis of thin-walled circular pipe members based on classical beam theories is easy to implement and needs much less computation time, however, they are limited in their ability to approximate the deformations as they cannot consider the deformation of the cross-section. This dissertation focuses on the study of the Generalized Beam Theory (GBT) which is both accurate and efficient in analyzing thin-walled members. This theory is based on the separation of variables in which the displacement field is expressed as a combination of predetermined deformation modes related to the cross-section, and unknown amplitude functions defined on the beam's longitudinal axis. Although the GBT was initially developed for long straight members, through the consideration of complementary deformation modes, which amend the null transverse and shear membrane strain assumptions of the classical GBT, problems involving short members, pipe bends, and geometrical nonlinearity can also be analyzed using GBT. In this dissertation, the GBT formulation for the analysis of these problems is developed and the application and capabilities of the method are illustrated using several numerical examples. Furthermore, the displacement and stress field results of these examples are verified using an equivalent refined shell-based finite element model. The developed static and dynamic GBT formulations for curved thin-walled circular pipes are based on the linear kinematic description of the curved shell theory. In these formulations, the complex problem in pipe bends due to the strong coupling effect of the longitudinal bending, warping and the cross-sectional ovalization is handled precisely through the derivation of the coupling tensors between the considered GBT deformation modes. Similarly, the geometrically nonlinear GBT analysis is formulated for thin-walled circular pipes based on the nonlinear membrane kinematic equations. Here, the initial linear and quadratic stress and displacement tangent stiffness matrices are built using the third and fourth-order GBT deformation mode coupling tensors. Longitudinally, the formulation of the coupled GBT element stiffness and mass matrices are presented using a beam-based finite element formulation. Furthermore, the formulated GBT elements are tested for shear and membrane locking problems and the limitations of the formulations regarding the membrane locking problem are discussed. N2 - Eine detaillierte Strukturanalyse dünnwandiger, kreisförmiger Rohrelemente erfordert oft die Verwendung von Schalenelementen in der Finite Elemente Methode. Diese Methode ermöglicht eine sehr gute Approximation des Verformungszustandes, erfordert jedoch einen hohen Grad der Diskretisierung, welcher wiederum einen hohen Rechenaufwand verursacht. Eine alternative Methode hierzu basiert auf klassischen Balkentheorien, welche eine einfache Modellierung ermöglichen und wesentlich geringeren Rechenaufwand erfordern. Diese weisen jedoch Einschränkungen bei der Approximation von Verformungen auf, da Querschnittsverformungen nicht berücksichtigt werden können. Schwerpunkt dieser Dissertation ist eine Untersuchung der Verallgemeinerten Technischen Biegetheorie (VTB), die sowohl eine genaue als auch eine effiziente Analyse von dünnwandigen Tragwerkselementen ermöglicht. Diese Theorie basiert auf einer Trennung der Variablen, in der das Verschiebungsfeld als eine Kombination von vorbestimmten Verformungsmoden der Querschnitts und unbekannten Amplitudenfunktionen in Längsrichtung ausgedrückt wird. Obwohl die VTB ursprünglich für lange, gerade Elemente entwickelt wurde, können durch die Berücksichtigung komplementärer Verformungsmoden, welche die Null-Annahmen der klassischen VTB für Quer- und Schubmembrandehnung abändern, Probleme mit kurzen Elementen, Rohrbögen und geometrischer Nichtlinearität analysiert werden. In dieser Dissertation wird die VTB-Formulierung für die Analyse dieser Probleme entwickelt. Die Anwendung und Möglichkeiten der Methode werden anhand mehrerer numerischer Beispiele veranschaulicht, deren Verschiebungs- und Spannungsfeldanalysen anhand eines äquivalenten, verfeinerten, schalenbasierten Finite-Elemente-Modells verifiziert werden. Die entwickelten statischen und dynamischen VTB-Formulierungen für Rohrbogenelemente basieren auf der linearen kinematischen Beschreibung der Theorie gekrümmter Schalen. In diesen Formulierungen wird das komplexe Problem in Rohrbögen aufgrund des starken Kopplungseffekts der Längsbiegung, der Verwölbung und der Querschnittsovalisierung durch die Herleitung der Kopplungstensoren zwischen den betrachteten VTB-Verformungsmoden präzise behandelt. In ähnlicher Weise wird die geometrisch nichtlineare VTB-Analyse für gerade Rohrelemente auf der Grundlage der nichtlinearen kinematischen Membrangleichungen formuliert. Die anfänglichen linearen und quadratischen Spannungs- und Verschiebungs-Tangentensteifigkeitsmatrizen werden dabei unter Verwendung der VTB-Kopplungstensoren dritter und vierter Ordnung aufgebaut. In Längsrichtung wird die Formulierung der gekoppelten VTB-Element-Steifigkeits- und Massenmatrizen unter Verwendung einer balkenbasierten Finite-Elemente Formulierung dargestellt. Weiterhin werden die VTB-Elemente auf Schub- und Membran-Locking-Probleme getestet und die Einschränkungen der Formulierungen bezüglich des Membran-Locking-Problems diskutiert. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,2 KW - Finite-Elemente-Methode KW - Dynamische Analyse KW - Generalized Beam Theory (GBT) KW - Finite Element Method KW - Dynamic Analysis KW - Geometrically nonlinear analysis KW - Curved thin-walled circular pipes Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220127-45723 ER - TY - THES A1 - Manzano Gómez, Noel A. T1 - The reverse of urban planning. Towards a 20th century history of informal urbanization in Europe and its origins in Madrid and Paris (1850-1940) N2 - The objective of this thesis was to understand the 20th-century history of informal urbanisation in Europe and its origins in Madrid and Paris. The concept of informal urbanisation was employed to refer to the process of developing shacks and precarious single-family housing areas that were not planned by the public powers and were considered to be substandard because of their below-average materials and social characteristics. Our main hypothesis was that despite being a phenomenon with ancient roots, informal urbanisation emerged as a public problem and was subsequently prohibited in connection with another historical process occurred: the birth of contemporary urban planning. Therefore, its transformation into a deviant and illegal urban growth mechanism would have been a pan-European process occurring at the same pace that urban planning developed during the first decades of the 20th century. Analysing the 20th-century history of informal urbanisation in Europe was an ambitious task that required using a large number of sources. To contend with this issue, this thesis combined two main methods: historiographical research about informal urbanisation in Europe and archival research of two case studies, Madrid and Paris, to make the account more precise by analysing primary sources of the subject. Our research of these informal areas, which were produced mainly through poor private allotments and housing developed on land squats, revealed two key moments of explosive growth across Europe: the 1920s and 1960s. The near disappearance of informal urbanisation throughout the continent seemed to be a consequence not of the historical development of urban planning—which was commonly transgressed and bypassed—but of the exacerbation of global economic inequalities, permitting the development of a geography of privilege in Europe. Concerning the cases of Paris and Madrid, the origins of informal urbanisation—that is, the moment the issue started to be problematised—seemed to occur in the second half of the 19th century, when a number of hygienic norms and surveillance devices began to control housing characteristics. From that moment onwards, informal urbanisation areas formed peripheral belts in both cities. This growth became the object of an illegalisation process of which we have identified three phases: (i) the unregulated development of the phenomenon during the second half of the 20th century, (ii) the institutional production of “exception regulations” to permit a controlled development of substandard housing in the peripheral fringes of both cities, and (iii) the synchronic prohibition of informal urbanisation in the 1920s and its illegal reproduction. KW - Stadtplanung KW - Verstädterung KW - Historische Soziologie KW - Urban Planning KW - Informal Urbanization KW - Comparative History KW - Historical Sociology KW - European Urban Studies Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220119-45693 ER - TY - THES A1 - Valizadeh, Navid T1 - Developments in Isogeometric Analysis and Application to High-Order Phase-Field Models of Biomembranes N2 - Isogeometric analysis (IGA) is a numerical method for solving partial differential equations (PDEs), which was introduced with the aim of integrating finite element analysis with computer-aided design systems. The main idea of the method is to use the same spline basis functions which describe the geometry in CAD systems for the approximation of solution fields in the finite element method (FEM). Originally, NURBS which is a standard technology employed in CAD systems was adopted as basis functions in IGA but there were several variants of IGA using other technologies such as T-splines, PHT splines, and subdivision surfaces as basis functions. In general, IGA offers two key advantages over classical FEM: (i) by describing the CAD geometry exactly using smooth, high-order spline functions, the mesh generation process is simplified and the interoperability between CAD and FEM is improved, (ii) IGA can be viewed as a high-order finite element method which offers basis functions with high inter-element continuity and therefore can provide a primal variational formulation of high-order PDEs in a straightforward fashion. The main goal of this thesis is to further advance isogeometric analysis by exploiting these major advantages, namely precise geometric modeling and the use of smooth high-order splines as basis functions, and develop robust computational methods for problems with complex geometry and/or complex multi-physics. As the first contribution of this thesis, we leverage the precise geometric modeling of isogeometric analysis and propose a new method for its coupling with meshfree discretizations. We exploit the strengths of both methods by using IGA to provide a smooth, geometrically-exact surface discretization of the problem domain boundary, while the Reproducing Kernel Particle Method (RKPM) discretization is used to provide the volumetric discretization of the domain interior. The coupling strategy is based upon the higher-order consistency or reproducing conditions that are directly imposed in the physical domain. The resulting coupled method enjoys several favorable features: (i) it preserves the geometric exactness of IGA, (ii) it circumvents the need for global volumetric parameterization of the problem domain, (iii) it achieves arbitrary-order approximation accuracy while preserving higher-order smoothness of the discretization. Several numerical examples are solved to show the optimal convergence properties of the coupled IGA–RKPM formulation, and to demonstrate its effectiveness in constructing volumetric discretizations for complex-geometry objects. As for the next contribution, we exploit the use of smooth, high-order spline basis functions in IGA to solve high-order surface PDEs governing the morphological evolution of vesicles. These governing equations are often consisted of geometric PDEs, high-order PDEs on stationary or evolving surfaces, or a combination of them. We propose an isogeometric formulation for solving these PDEs. In the context of geometric PDEs, we consider phase-field approximations of mean curvature flow and Willmore flow problems and numerically study the convergence behavior of isogeometric analysis for these problems. As a model problem for high-order PDEs on stationary surfaces, we consider the Cahn–Hilliard equation on a sphere, where the surface is modeled using a phase-field approach. As for the high-order PDEs on evolving surfaces, a phase-field model of a deforming multi-component vesicle, which consists of two fourth-order nonlinear PDEs, is solved using the isogeometric analysis in a primal variational framework. Through several numerical examples in 2D, 3D and axisymmetric 3D settings, we show the robustness of IGA for solving the considered phase-field models. Finally, we present a monolithic, implicit formulation based on isogeometric analysis and generalized-alpha time integration for simulating hydrodynamics of vesicles according to a phase-field model. Compared to earlier works, the number of equations of the phase-field model which need to be solved is reduced by leveraging high continuity of NURBS functions, and the algorithm is extended to 3D settings. We use residual-based variational multi-scale method (RBVMS) for solving Navier–Stokes equations, while the rest of PDEs in the phase-field model are treated using a standard Galerkin-based IGA. We introduce the resistive immersed surface (RIS) method into the formulation which can be employed for an implicit description of complex geometries using a diffuse-interface approach. The implementation highlights the robustness of the RBVMS method for Navier–Stokes equations of incompressible flows with non-trivial localized forcing terms including bending and tension forces of the vesicle. The potential of the phase-field model and isogeometric analysis for accurate simulation of a variety of fluid-vesicle interaction problems in 2D and 3D is demonstrated. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,1 KW - Phasenfeldmodell KW - Vesikel KW - Hydrodynamik KW - Multiphysics KW - Isogeometrische Analyse KW - Isogeometric Analysis KW - Vesicle dynamics KW - Phase-field modeling KW - Geometric Partial Differential Equations KW - Residual-based variational multiscale method Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220114-45658 ER - TY - THES A1 - Wang, Jiasheng T1 - Lebensdauerabschätzung von Bauteilen aus globularem Grauguss auf der Grundlage der lokalen gießprozessabhängigen Werkstoffzustände N2 - Das Ziel der Arbeit ist, eine mögliche Verbesserung der Güte der Lebensdauervorhersage für Gusseisenwerkstoffe mit Kugelgraphit zu erreichen, wobei die Gießprozesse verschiedener Hersteller berücksichtigt werden. Im ersten Schritt wurden Probenkörper aus GJS500 und GJS600 von mehreren Gusslieferanten gegossen und daraus Schwingproben erstellt. Insgesamt wurden Schwingfestigkeitswerte der einzelnen gegossenen Proben sowie der Proben des Bauteils von verschiedenen Gussherstellern weltweit entweder durch direkte Schwingversuche oder durch eine Sammlung von Betriebsfestigkeitsversuchen bestimmt. Dank der metallografischen Arbeit und Korrelationsanalyse konnten drei wesentliche Parameter zur Bestimmung der lokalen Dauerfestigkeit festgestellt werden: 1. statische Festigkeit, 2. Ferrit- und Perlitanteil der Mikrostrukturen und 3. Kugelgraphitanzahl pro Flächeneinheit. Basierend auf diesen Erkenntnissen wurde ein neues Festigkeitsverhältnisdiagramm (sogenanntes Sd/Rm-SG-Diagramm) entwickelt. Diese neue Methodik sollte vor allem ermöglichen, die Bauteildauerfestigkeit auf der Grundlage der gemessenen oder durch eine Gießsimulation vorhersagten lokalen Zugfestigkeitswerte sowie Mikrogefügenstrukturen besser zu prognostizieren. Mithilfe der Versuche sowie der Gießsimulation ist es gelungen, unterschiedliche Methoden der Lebensdauervorhersage unter Berücksichtigung der Herstellungsprozesse weiterzuentwickeln. KW - Grauguss KW - Lebensdauerabschätzung KW - Werkstoffprüfung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220111-45542 ER - TY - THES A1 - Bockelmann, Leo T1 - Zeit, dass sich was dreht. Windenergieanlagen aus denkmalkundlicher Perspektive N2 - Knapp 30.000 Windenergieanlagen zwischen Nordsee und Alpen lassen unübersehbar erkennen, dass sich unser Energiesystem in einer umfassenden Transformation befindet. Allenthalben erfährt diese Entwicklung eine breite und kontroverse Rezeption und auch in der Denkmalpflege werden Windenergieanlagen aufgrund ihrer mitunter erheblichen Auswirkungen auf die Landschaft noch überwiegend als Störung wahrgenommen. Diese Arbeit nimmt dagegen die historische Entwicklung in den Blick und plädiert dafür, Windenergieanlagen als bedeutendes Kulturerbe zu verstehen. Angesichts des Voranschreitens der Energiewende wird angenommen, dass gerade älteren Modellen als baulichen Zeugnissen umfangreicher energiepolitischer Veränderungen seit den 1970er Jahren eine hohe Bedeutung zugeschrieben werden kann. Daher besteht das Ziel darin, Windenergieanlagen herauszuarbeiten, welche als hervorragende Zeugnisse der Entwicklung der Windenergienutzung in Deutschland zu bewerten sind. Zur Annäherung werden diese zunächst als Untersuchungsgegenstand typologisch abgegrenzt. Eine wesentliche Besonderheit von Windenergieanlagen besteht darin, dass sie im Verhältnis zur eigentlichen Flächenversiegelung durch ihre vertikale Struktur erhebliche visuelle Auswirkungen auf die Landschaft haben. Anschließend wird die Entwicklung der Windenergienutzung seit den 1970er Jahren genauer betrachtet, welche insgesamt nicht linear verlief und von vielen Konflikten gekennzeichnet ist. Diese muss im Kontext eines wachsenden Umweltbewusstseins verstanden werden, das umfangreiche energiepolitische Veränderungen zur Folge hatte. Auf dieser Grundlage werden schließlich in einer denkmalkundlichen Reihenuntersuchung Windenergieanlagen herausgearbeitet, welche in hervorragender Weise von der Entwicklung zeugen. Die Auswahl bleibt allerdings mit sechs Objekten im Verhältnis zum Gesamtbestand von knapp 30.000 Anlagen relativ beschränkt, weil das auf die Abgrenzung von Besonderheiten ausgelegte etablierte Denkmalverständnis bei einem zeitlich so dichten Bestand gleichartiger Bauwerke an eine Grenze kommt. Abschließend werden mögliche Erhaltungsperspektiven sowie denkmaltheoretische und -praktische Schlussfolgerungen diskutiert. Dabei ist unbedingt ein Erhalt am Ursprungsstandort anzustreben, wobei im Einzelfall entschieden werden muss, ob Belange des Funktions- oder Substanzerhaltes höher zu gewichten sind. Die skizzierten Auswahlprobleme regen darüber hinaus zur Diskussion zusätzlicher denkbarer Bewertungskategorien an, wobei sich insbesondere die gesellschaftliche Wahrnehmung und ökologische Werte aufdrängen. Zudem kann für die stärkere Berücksichtigung von Funktionszusammenhängen bei der Betrachtung technischer Infrastruktur in der Denkmalpflege plädiert werden. Insgesamt führt die denkmalkundliche Auseinandersetzung mit Windenergieanlagen damit weit über die Herausarbeitung einzelner Objekte hinaus und macht eindrücklich auf aktuelle Herausforderungen der Denkmalpflege und darüber hinaus aufmerksam. KW - Industriekultur KW - Denkmalpflege KW - Windenergie KW - Landschaft KW - Kulturerbe KW - Heritage KW - Infrastrukturgeschichte KW - Technikgeschichte KW - Klimaschutz KW - Energiewende Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211210-45439 ER - TY - THES A1 - Preis Dutra, Joatan T1 - Cultural Heritage on Mobile Devices: Building Guidelines for UNESCO World Heritage Sites' Apps N2 - Technological improvements and access provide a fertile scenario for creating and developing mobile applications (apps). This scenario results in a myriad of Apps providing information regarding touristic destinations, including those with a cultural profile, such as those dedicated to UNESCO World Heritage Sites (WHS). However, not all of the Apps have the same efficiency. In order to have a successful app, its development must consider usability aspects and features aligned with reliable content. Despite the guidelines for mobile usability being broadly available, they are generic, and none of them concentrates specifically into cultural heritage places, especially on those placed in an open-air scenario. This research aims to fulfil this literature gap and discusses how to adequate and develop specific guidelines for a better outdoor WHS experience. It uses an empirical approach applied to an open-air WHS city: Weimar and its Bauhaus and Classical Weimar sites. In order to build a new set of guidelines applied for open-air WHS, this research used a systematic approach to compare literature-based guidelines to industry-based ones (based on affordances), extracted from the available Apps dedicated to WHS set in Germany. The instructions compiled from both sources have been comparatively tested by using two built prototypes from the distinctive guidelines, creating a set of recommendations collecting the best approach from both sources, plus suggesting new ones the evaluation. N2 - Der technische Fortschritt und der Zugang dazu bieten ein ertragreiches Szenario für die Innovation und Entwicklung mobiler Anwendungen (Apps). Daraus ist eine Vielzahl von zu Verfügung stehenden Apps entstanden, die Informationen über touristische Reiseziele bereitstellen, insbesondere solche mit einem kulturellen Hintergrund, etwa die, die zum UNESCO Welterbe/Weltkulturebe (auf Englisch WHS – World Heritage Sites, fotan so genannt in dieser Arteit) gehören. Allerdings haben nicht alle Apps die gleiche Effizienz. Um eine erfolgreiche App entwickeln zu können, sollten gleichzeitig die Benutzerfreundlichkeit der Aspekte und Funktionen in Betracht gezogen werden, als auch Zuverlässigkeit ihrer Inhalte. Obwohl die Richtlinien für eine mobile Benutzerfreundlichkeit weit verbreitet sind, sind diese jedoch generisch. Keine Richtlinie ist eindeutig auf Orte des Kulturerbes zugeschnitten, schon gar nicht auf Standorte, die sich im Freien befinden. Ziel dieser Arbeit ist es, diese Literaturlücke zu schließen und gleichzeitig nahe zu bringen, wie bestimmte Richtlinien angepasst und ausgebaut werden könnten, um bessere WHS-Erlebnisse im Freien zu schaffen. Die Arbeit geht empirisch vor am Beispiel der deutschen Stadt Weimar, die mit ihren Altstadt- und Bauhaus-Standorten als Freiluft-WHS gilt. Deutschland ist das fünftbedeutsamste Land der UNESCO-Liste und bekannt für sein technologisches Profil und der Zugang dazu. Dieses Land als geeignete Umgebung für den empirischen Ansatz zu wählen ist ein guter Ausgangspunkt, um Erfahrungen zu sammeln für innovative Projekte, die mit Apps das Kulturerbe erschließen. Um eine Reihe neuer Richtlinien für Freiluft-WHS (auf Englisch: Open-Air WHS) aufstellen zu können, wurden im Rahmen dieser Arbeit Richtlinien aus akademischen Quellen mit branchenüblichen Richtlinien verglichen, gewonnen aus einer umfangreichen Auszug verfügbarer Apps, die sich den WHS in Deutschland widmen. Im branchenüblichen Ansatz wurden WHS-bezogene Apps ausgewählt, die auf dem deutschen App-Markt erhältlich sind (für iOS- und Android-Geräte). Deren Eigenschaften und Gebrauch wurden aus der Nutzersicht betrachtet. Daraus ließen sich Gemeinsamkeiten ableiten innerhalb der aktuellen Funktionen und Tools, mit denen WHS beworben werden. Die Analyse förderte Richtlinien hervor fand aus der Layout-, Navigations-, Design- und der Inhaltsperspektive. Daraus wurde eine Prototyp-App erstellt, die dem in der Branche verzeichneten Stand der Technik entspricht. Während die Richtlinien aus der Branchenübersicht einen Beobachtungsansatz der Leistungen verfolgten, bezogen die aus der Literaturrecherche gewonnenen Richtlinien einen systematischen Ansatz des akademischen Materials. Der literaturbasierte Ansatz wurde aus Veröffentlichungen zur Benutzerfreundlichkeit mobiler Apps gewonnen, die in Forschungsdatenbanken erhältlich sind. Zusätzlich wurden in führenden Unternehmen für die Entwicklung von mobilen Betriebssystemen (iOS und Android) bereits vorhandene Modelle zur Nutzerfreundlichkeit sowie offizielle Richtlinien einbezogen, die unterschiedliche Ansätze sowie Ansichten für das Design mobiler Schnittstellen verbinden und kombinieren und die für WHS genutzt werden könnten. Unter Rücksichtnahme der Vielfalt der Besucherprofile in Weimar wurden auch Studien über Nutzeroberflächen für ältere Nutzer eingeschlossen. Obwohl die Leitlinien sich nicht auf didaktische Funktionen konzentrieren, wurden auch Studien über das mobile Lernen in der Studie mitaufgenommen, sofern die Nutzeroberfläche Teil des Studienziels war. Diese Entscheidung wurde getroffen, weil die Stadt Weimar auch jugendliche Studenten als Besucher hat, die die historischen Sehenswürdigkeiten der Stadt besuchen und kennenlernen. Allgemein konzentrierte sich diese Ausarbeitung auf klare Anweisungen, die in Richtlinien umgesetzt werden könnten. Die Analyse beschränkte sich jedoch nicht auf die Auswahlliste der Studienobjekte und wurde extrapoliert, unter Berücksichtigung relevanter Referenzen, die in den für die Stichprobe ausgewählten Veröffentlichungen zitiert wurden. Wann immer eine Leitlinie oder Empfehlung gefunden werden konnte, wurde diese, verfahrensgemäß in eine Tabelle eingefügt, einer ähnlichen Struktur folgend zu den aus der Übersicht der App-Industrie gewonnenen Richtlinien. Um den Erkenntnissen der Literaturrecherche zu entsprechen, wurden neue Kategorien hinzugefügt. Im Großen und Ganzen bestätigten einige Richtlinien des literarischen Ansatzes die Anweisungen des branchenorientierten Ansatzes, andere widersprachen diesen. Dadurch konnte ein neuer Satz von Leitlinien entstehen, die gegeneinander getestet wurden. Der Inhalt beider Prototypen (branchen- und literaturbasiert) wurden ausgearbeitet, um das WHS in Weimar anzusprechen. Dabei wurden Inhalte abgerufen, die auf der offiziellen touristischen Website der Stadt und in der größten Kulturstiftung Weimars, der Klassik Stiftung, verfügbar sind. Die Nutzung zweier verschiedener einfache Prototypen bot die Möglichkeit, auch andere Funktionen zu testen wie z. B. verschiedene Arten der Anzeige von Karten und Inhalten. Zur Überprüfung und Gegenüberstellung der verschiedenen Leitlinien, wurden ein aufgabenbasierter Test und eine vergleichende Bewertungsumfrage durchgeführt. Tester aus verschiedenen Altersgruppen führten in beiden Prototypen eine Reihe vordefinierter Aufgaben aus und beantworteten einen Fragebogen, wobei die in beiden Versionen vorgestellten Funktionen und Formate verglichen werden konnten. Die Fragen sollten anhand eine Auswahl vordefinierter Antworten von Nutzern beantwortet werden, ideal für eine statistische Auswertung, insbesondere zum Thema Benutzerzufriedenheit. Auch offene Fragen, zur Leistung persönliche Beiträge der Tester, wurden angeboten. Diese Methode war ausschlaggebend dafür, beide Richtliniensätze (Industrie vs. Literaturrecherche) gegeneinander zu vergleichen und zu analysieren, So konnte ein idealer Ansatz gefunden werden für Richtlinien von Apps, die sich mit Welterbestätten unter freiem Himmel befassen. Auch weitere Empfehlungen, die sich aus der Bewertung ergaben, konnten hinzugefügt werden. Das Ergebnis führt zu einem umfassendem Satz von Richtlinien, die in zukünftigen touristischen Open-Air-Apps angewandt werden können, die sich mit Weltkulturerbestätten befassen. KW - Benutzerschnittstellenentwurfssystem KW - Welterbe KW - Benutzerfreundlichkeit KW - App KW - Mobiles Endgerät KW - Interface Design KW - world heritage sites KW - usability KW - mobile devices Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211129-45319 UR - www.joatan.com.br/docs/Thesis_JoatanPreisDutra.pdf ER - TY - THES A1 - Weißker, Tim T1 - Group Navigation in Multi-User Virtual Reality N2 - Multi-user virtual reality systems enable collocated as well as distributed users to perform collaborative activities in immersive virtual environments. A common activity in this context is to move from one location to the next as a group to explore the environment together. The simplest solution to realize these multi-user navigation processes is to provide each participant with a technique for individual navigation. However, this approach entails some potentially undesirable consequences such as the execution of a similar navigation sequence by each participant, a regular need for coordination within the group, and, related to this, the risk of losing each other during the navigation process. To overcome these issues, this thesis performs research on group navigation techniques that move group members together through a virtual environment. The presented work was guided by four overarching research questions that address the quality requirements for group navigation techniques, the differences between collocated and distributed settings, the scalability of group navigation, and the suitability of individual and group navigation for various scenarios. This thesis approaches these questions by introducing a general conceptual framework as well as the specification of central requirements for the design of group navigation techniques. The design, implementation, and evaluation of corresponding group navigation techniques demonstrate the applicability of the proposed framework. As a first step, this thesis presents ideas for the extension of the short-range teleportation metaphor, also termed jumping, for multiple users. It derives general quality requirements for the comprehensibility of the group jumping process and introduces a corresponding technique for two collocated users. The results of two user studies indicate that sickness symptoms are not affected by user roles during group jumping and confirm improved planning accuracy for the navigator, increased spatial awareness for the passenger, and reduced cognitive load for both user roles. Next, this thesis explores the design space of group navigation techniques in distributed virtual environments. It presents a conceptual framework to systematize the design decisions for group navigation techniques based on Tuckman's model of small-group development and introduces the idea of virtual formation adjustments as part of the navigation process. A quantitative user study demonstrates that the corresponding extension of Multi-Ray Jumping for distributed dyads leads to more efficient travel sequences and reduced workload. The results of a qualitative expert review confirm these findings and provide further insights regarding the complementarity of individual and group navigation in distributed virtual environments. Then, this thesis investigates the navigation of larger groups of distributed users in the context of guided museum tours and establishes three central requirements for (scalable) group navigation techniques. These should foster the awareness of ongoing navigation activities as well as facilitate the predictability of their consequences for all group members (Comprehensibility), assist the group with avoiding collisions in the virtual environment (Obstacle Avoidance), and support placing the group in a meaningful spatial formation for the joint observation and discussion of objects (View Optimization). The work suggests a new technique to address these requirements and reports on its evaluation in an initial usability study with groups of five to ten (partially simulated) users. The results indicate easy learnability for navigators and high comprehensibility for passengers. Moreover, they also provide valuable insights for the development of group navigation techniques for even larger groups. Finally, this thesis embeds the previous contributions in a comprehensive literature overview and emphasizes the need to study larger, more heterogeneous, and more diverse group compositions including the related social factors that affect group dynamics. In summary, the four major research contributions of this thesis are as follows: - the framing of group navigation as a specific instance of Tuckman's model of small-group development - the derivation of central requirements for effective group navigation techniques beyond common quality factors known from single-user navigation - the introduction of virtual formation adjustments during group navigation and their integration into concrete group navigation techniques - evidence that appropriate pre-travel information and virtual formation adjustments lead to more efficient travel sequences for groups and lower workloads for both navigators and passengers Overall, the research of this thesis confirms that group navigation techniques are a valuable addition to the portfolio of interaction techniques in multi-user virtual reality systems. The conceptual framework, the derived quality requirements, and the development of novel group navigation techniques provide effective guidance for application developers and inform future research in this area. N2 - Multi-User-Virtual-Reality-Systeme ermöglichen es lokalen und räumlich getrennten Benutzer*innen, kollaborative Aktivitäten in einer immersiven virtuellen Umgebung auszuüben. Eine grundlegende Aufgabe in diesem Zusammenhang ist die Navigation von einem Ort zum nächsten als Gruppe, um die Umgebung gemeinsam zu erkunden. Die einfachste Lösung zur Realisierung dieser Mehrbenutzer*innen-Navigationsprozesse besteht darin, jedem*jeder Teilnehmer*in eine Technik zur individuellen Navigation zur Verfügung zu stellen. Dieser Ansatz führt jedoch zu einigen potenziell unerwünschten Begleiterscheinungen, wie zum Beispiel der Ausführung einer ähnlichen Navigationssequenz durch jede*n Teilnehmer*in, einem regelmäßigen Koordinationsbedarf innerhalb der Gruppe und damit verbunden der Gefahr, sich während des Navigationsprozesses zu verlieren. Zur Überwindung dieser Problematiken erforscht die vorliegende Arbeit Gruppennavigationstechniken, die alle Gruppenmitglieder gemeinsam durch eine virtuelle Umgebung bewegen. Die vorgestellten Beiträge wurden von vier übergreifenden Forschungsfragen geleitet, welche sich mit Qualitätsanforderungen an Gruppennavigationstechniken, den Unterschieden zwischen lokaler und räumlich getrennter Teilnahme, der Skalierbarkeit von Gruppennavigation und der Eignung von Einzel- und Gruppennavigationstechniken für verschiedene Szenarien befassen. Die vorliegende Arbeit nähert sich diesen Fragen durch die Einführung eines allgemeinen konzeptionellen Frameworks sowie die Spezifikation zentraler Anforderungen an den Entwurf von Gruppennavigationstechniken. Die Entwicklung, Implementierung und Evaluation entsprechender Gruppennavigationstechniken demonstrieren die Anwendbarkeit des vorgeschlagenen Frameworks. In einem ersten Schritt stellt diese Arbeit Ideen zur Erweiterung der Teleportationsmetapher über kurze Distanzen, auch Jumping genannt, für mehrere Benutzer*innen vor. Sie leitet allgemeine Qualitätsanforderungen zur Verständlichkeit des Gruppen-Jumpings ab und präsentiert eine entsprechende Technik für zwei lokale Benutzer*innen. Die Ergebnisse zweier Benutzungsstudien zeigen keine Einflüsse des aktiven oder passiven Jumpings auf Symptome der Simulatorkrankheit und bestätigen eine erhöhte Planungsgenauigkeit für den*die Navigator*in, ein verbessertes räumliches Verständnis für den*die Passagier*in und eine reduzierte kognitive Belastung für beide Rollen. Danach untersucht diese Arbeit den Gestaltungsraum von Gruppennavigationstechniken in verteilten virtuellen Umgebungen. Basierend auf Tuckmans Modell der Kleingruppenentwicklung stellt sie ein konzeptionelles Framework zur Systematisierung der Designentscheidungen für Gruppennavigationstechniken vor und führt die Idee der virtuellen Formationsanpassungen als Teil des Navigationsprozesses ein. Eine quantitative Benutzungsstudie zeigt, dass eine entsprechende Erweiterung des Multi-Ray Jumpings für räumlich getrennte Dyaden zu effizienteren Navigationsabläufen und geringeren wahrgenommenen Arbeitslasten führt. Die Ergebnisse eines qualitativen Expert-Reviews bestätigen diese Erkenntnisse und liefern weitere Einsichten bezüglich der Komplementarität von Einzel- und Gruppennavigation in verteilten virtuellen Umgebungen. Anschließend untersucht diese Arbeit die Navigation größerer Gruppen räumlich getrennter Benutzer*innen im Kontext von Museumsführungen und stellt drei zentrale Anforderungen für (skalierbare) Gruppennavigationstechniken auf. Diese sollen das Bewusstsein für laufende Navigationsaktivitäten fördern sowie die Vorhersehbarkeit ihrer Konsequenzen für alle Gruppenmitglieder erleichtern (Verständlichkeit), der Gruppe bei der Vermeidung von Kollisionen in der virtuellen Umgebung assistieren (Hindernisvermeidung) und die Platzierung der Gruppe in einer sinnvollen räumlichen Formation für die gemeinsame Betrachtung und Diskussion von Objekten unterstützen (Blickoptimierung). Die Arbeit stellt eine neue Technik zur Adressierung dieser Anforderungen vor, welche in einer initialen Usability-Studie mit Gruppen von fünf bis zehn (teilweise simulierten) Benutzer*innen evaluiert wurde. Die Ergebnisse zeigen eine einfache Erlernbarkeit für den*die Navigator*in und eine hohe Verständlichkeit für Passagier*innen. Darüber hinaus liefern sie wertvolle Erkenntnisse zur Entwicklung von Gruppennavigationstechniken für noch größere Gruppenstärken. Abschließend bettet diese Arbeit die bisherigen Beiträge in einen umfassenden Literaturüberblick ein und betont den Bedarf zukünftiger Forschungsarbeiten zu größeren, heterogeneren und diverseren Gruppenkompositionen. Dies beinhaltet ebenfalls die Betrachtung der damit verbundenen sozialen Faktoren sowie deren Einfluss auf die Gruppendynamik. Zusammengefasst lauten die vier wichtigsten Forschungsbeiträge dieser Arbeit wie folgt: - die Einordnung von Gruppennavigationsprozessen als spezifische Instanz von Tuckmans Modell der Kleingruppenentwicklung - die Ableitung zentraler Anforderungen an effektive Gruppennavigationstechniken zusätzlich zu aus Einzelnavigationskontexten bekannten Qualitätsfaktoren - die Einführung von virtuellen Formationsanpassungen als Teil der Gruppennavigation und deren Integration in konkrete Gruppennavigationstechniken - Nachweise, dass geeignet gewählte Vorschaumechanismen sowie virtuelle Formationsanpassungen zu effizienteren Navigationssequenzen für die Gruppe und geringeren wahrgenommenen Arbeitslasten für Navigator*innen und Passagier*innen führen Insgesamt bestätigen die Ergebnisse dieser Arbeit, dass Gruppennavigationstechniken eine wertvolle Ergänzung zum Portfolio der Interaktionstechniken in Multi-User-Virtual-Reality-Systemen sind. Das konzeptionelle Framework, die abgeleiteten Qualitätsanforderungen und die Entwicklung entsprechender Gruppennavigationstechniken bilden eine relevante Wissensbasis für Anwendungsentwickler*innen und informieren zukünftige Forschung in diesem Gebiet. KW - Virtuelle Realität KW - Mensch-Maschine-Kommunikation KW - Multi-User Virtual Reality KW - Group Navigation KW - Collaborative Virtual Environments KW - Human-Computer Interaction Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211124-45305 ER - TY - THES A1 - Stang, René T1 - Methode zur Ökoeffizienzbewertung wärmetechnischer Anlagen in Gebäuden N2 - Die vorliegende Arbeit richtet sich an Ingenieur*innen und Wissenschaftler*innen der technischen Gebäudeausrüstung. Sie greift einen sich abzeichnenden Änderungsbedarf in der Umwelt- und Nachhaltigkeitsbewertung von Gebäuden und wärmetechnischen Anlagen auf. Der aktuell genutzte nicht erneuerbare Primärenergiebedarf wird insbesondere hinsichtlich künftiger politischer Klima- und Umweltschutzziele als alleinige Bewertungsgröße nicht ausreichend sein. Die mit dieser Arbeit vorgestellte Ökoeffizienzbewertungsmethode kann als geeignetes Instrument zur Lösung der Probleme beitragen. Sie ermöglicht systematische, ganzheitliche Bewertungen und reproduzierbare Vergleiche wärmetechnischer Anlagen bezüglich ihrer ökologischen und ökonomischen Nachhaltigkeit. Die wesentlichsten Neuentwicklungen sind die spezifische Umweltleistung, in Erweiterung zum genutzten Primärenergiefaktor, und der Ökoeffizienzindikator UWI. KW - Energiewirtschaft KW - Nachhaltigkeit KW - Primärenergie KW - erneuerbare Energie KW - Wärmebedarf KW - Nachhaltigkeitsbewertung KW - Ökobilanz KW - Ökoeffizienz KW - Primärenergiefaktor KW - Umweltleistung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211119-45280 SN - 978-3-18-300623-6 (print) PB - VDI Verlag CY - Düsseldorf ER - TY - THES A1 - List, Eik T1 - Design, Analysis, and Implementation of Symmetric-key (Authenticated) Ciphers N2 - Modern cryptography has become an often ubiquitous but essential part of our daily lives. Protocols for secure authentication and encryption protect our communication with various digital services, from private messaging, online shopping, to bank transactions or exchanging sensitive information. Those high-level protocols can naturally be only as secure as the authentication or encryption schemes underneath. Moreover, on a more detailed level, those schemes can also at best inherit the security of their underlying primitives. While widespread standards in modern symmetric-key cryptography, such as the Advanced Encryption Standard (AES), have shown to resist analysis until now, closer analysis and design of related primitives can deepen our understanding. The present thesis consists of two parts that portray six contributions: The first part considers block-cipher cryptanalysis of the round-reduced AES, the AES-based tweakable block cipher Kiasu-BC, and TNT. The second part studies the design, analysis, and implementation of provably secure authenticated encryption schemes. In general, cryptanalysis aims at finding distinguishable properties in the output distribution. Block ciphers are a core primitive of symmetric-key cryptography which are useful for the construction of various higher-level schemes, ranging from authentication, encryption, authenticated encryption up to integrity protection. Therefore, their analysis is crucial to secure cryptographic schemes at their lowest level. With rare exceptions, block-cipher cryptanalysis employs a systematic strategy of investigating known attack techniques. Modern proposals are expected to be evaluated against these techniques. The considerable effort for evaluation, however, demands efforts not only from the designers but also from external sources. The Advanced Encryption Standard (AES) is one of the most widespread block ciphers nowadays. Therefore, it is naturally an interesting target for further analysis. Tweakable block ciphers augment the usual inputs of a secret key and a public plaintext by an additional public input called tweak. Among various proposals through the previous decade, this thesis identifies Kiasu-BC as a noteworthy attempt to construct a tweakable block cipher that is very close to the AES. Hence, its analysis intertwines closely with that of the AES and illustrates the impact of the tweak on its security best. Moreover, it revisits a generic tweakable block cipher Tweak-and-Tweak (TNT) and its instantiation based on the round-reduced AES. The first part investigates the security of the AES against several forms of differential cryptanalysis, developing distinguishers on four to six (out of ten) rounds of AES. For Kiasu-BC, it exploits the additional freedom in the tweak to develop two forms of differential-based attacks: rectangles and impossible differentials. The results on Kiasu-BC consider an additional round compared to attacks on the (untweaked) AES. The authors of TNT had provided an initial security analysis that still left a gap between provable guarantees and attacks. Our analysis conducts a considerable step towards closing this gap. For TNT-AES - an instantiation of TNT built upon the AES round function - this thesis further shows how to transform our distinguisher into a key-recovery attack. Many applications require the simultaneous authentication and encryption of transmitted data. Authenticated encryption (AE) schemes provide both properties. Modern AE schemes usually demand a unique public input called nonce that must not repeat. Though, this requirement cannot always be guaranteed in practice. As part of a remedy, misuse-resistant and robust AE tries to reduce the impact of occasional misuses. However, robust AE considers not only the potential reuse of nonces. Common authenticated encryption also demanded that the entire ciphertext would have to be buffered until the authentication tag has been successfully verified. In practice, this approach is difficult to ensure since the setting may lack the resources for buffering the messages. Moreover, robustness guarantees in the case of misuse are valuable features. The second part of this thesis proposes three authenticated encryption schemes: RIV, SIV-x, and DCT. RIV is robust against nonce misuse and the release of unverified plaintexts. Both SIV-x and DCT provide high security independent from nonce repetitions. As the core under SIV-x, this thesis revisits the proof of a highly secure parallel MAC, PMAC-x, revises its details, and proposes SIV-x as a highly secure authenticated encryption scheme. Finally, DCT is a generic approach to have n-bit secure deterministic AE but without the need of expanding the ciphertext-tag string by more than n bits more than the plaintext. From its first part, this thesis aims to extend the understanding of the (1) cryptanalysis of round-reduced AES, as well as the understanding of (2) AES-like tweakable block ciphers. From its second part, it demonstrates how to simply extend known approaches for (3) robust nonce-based as well as (4) highly secure deterministic authenticated encryption. N2 - Die moderne Kryptographie hat sich zu einem oft unsichtbaren aber essentiellen Teil unserer alltäglichen Kommunikation entwickelt. Protokolle für sichere Authentisierung und Verschlüsselung schützen uns als Gesellschaft in einer Vielzahl von Lebensbereichen, sei es in Nachrichten oder Online-Einkäufen, bis hin zum Schutz von Banktransaktionen oder behördlicher Kommunikation. In den meisten Fällen ist dabei die Sicherstellung von Authentizität und Verschlüsselung von entscheidender Bedeutung. Wie eine Kette ihre Stärke aus den einzelnen Gliedern bezieht, kann jedes kryptographisches Protokoll jedoch nur so sicher sein wie seine darunterliegenden Verfahren und Primitive. Mit den offenen Nominierungswettbewerben haben sich heutige Standards wie zum Beispiel der Advanced Encryption Standard (AES) für Blockchiffren oder der Galois/Counter Mode für authentisierte Verschlüsselung etabliert. Zudem haben sie durch vergangenen zwei Jahrzehnte an Analyse durch die kryptographische Forschergemeinschaft ein hohes Maß an Vertrauen erhalten. Insbesondere in der symmetrischen Kryptographie, die hohen Wert auf Effizienz der Verfahren legt, werden vorwiegend systematische Analysetechniken eingesetzt. Darum ist der Prozess der Verständnisentwicklung und -gewinnung nie abgeschlossen, sondern Bedarf neuer Blickwinkel und Ideen. Als die Kernkomponenten der täglichen Internetkommunikation sind dabei Blockchiffren und Verfahren zur authentisierten Verschlüsselung dabei von besonderem Interesse. Diese Dissertation gliedert sich in zwei Hauptteile die insgesamt sechs Beiträge beinhalten. Der erste Teil ist der Analyse von AES-basierten (tweakable) Blockchiffren gewidmet. Der zweite Teil stellt neue Konstruktionen für robuste authentisierte Verschlüsselung mit hohen Sicherheitsgarantien vor. Die Kryptanalyse versucht nicht-ideale Eigenschaften in den Ausgaben kryptographischer Systeme zu finden. Blockchiffren als wichtige Grundbausteine der symmetrischen Kryptographie sind hierbei von besonderem Interesse, da sie die Grundlage für die Konstruktion sicherer Verfahren für Authentisierung oder Verschlüsselung darstellen. Diese wiederum schützen in Protokollen in einer Vielzahl von Anwendungen uns in unserem Alltag. Die Analyse von Blockchiffren als Grundoperationen ist daher essentiell um die Sicherheit darauf aufbauender Verfahren verstehen zu können. Der AES ist wahrscheinlich die derzeit am weitesten verbreitete moderne Blockchiffre, was ihn allein bereits zum hochinteressanten Studienobjekt macht. Tweakable Blockchiffren ergänzen ihre klassischen Vorbilder um einen zusätzlichen öffentlichen Input, den Tweak, was insbesondere in der jüngeren Vergangenheit zu effizienteren oder sichereren Verfahren geführt hat. AES-basierte Konstruktionen versuchen von der Vielzahl der existierenden bekannten Eigenschaften des AES und seiner Effizienz zu profitieren. Die Rolle des Tweaks für die Sicherheit ist allerdings nicht völlig verstanden. Ihre Analyse ist daher von besonderem Interesse. Der erste Teil dieser Thesis stellt eine neue Sichtweise der differentiellen Analyse von vier bis sechs Runden AES vor. Im weiteren Verlauf betrachtet sie differentielle Angriffe auf Kiasu-BC, eine Tweakable Blockchiffre auf Basis des AES, die versucht, so nah wie möglich am Design des AES zu bleiben. Somit kann ihre Analyse die durch den Tweak hervorgerufenen Unterschiede genauer beleuchten als das bei dedizierten Konstruktion möglich wäre. Abschließend analysiert der erste Teil Tweak-and-Tweak (TNT), eine generische Transformation einer klassischen in eine tweakable Blockchiffre, sowie ihre Instanz TNT-AES. Durch einen besseren Sicherheitsbeweis von TNT schließt sie die Lücke (mit Ausnahme eines logarithmischen Faktors) zwischen ihrer vorher bewiesenen Sicherheit und bekannten Angriffen. Eine Vielzahl von Anwendungen für Authentisierung oder Verschlüsselung benötigen beide Eigenschaften simultan. Darum sind Verfahren für die Authentisierte Verschlüsselung (AE Schemes) aus dem täglichen Gebrauch nicht mehr wegzudenken. Bis vor einigen Jahren waren die Anforderungen an den Gebrauch von AE Schemes allerdings sehr restriktiv: Moderne AE Schemes erfordern in der Regel für jede zu verschlüsselnde Nachricht einen Input der sich nicht wiederholen darf, eine Nonce. Nonces sind allgemein akzeptiert und sinnvoll - ihre Einmaligkeit kann jedoch nicht über alle Anwendungsumgebungen hinweg garantiert werden. Für viele Konstruktionen bedeutet eine Verletzung der Anforderungen allerdings dass keinerlei Sicherheit mehr gewährleistet werden kann. Robuste AE Schemes wurden eingeführt um den Schaden möglichst auch im Fall von Nonce-Wiederholungen Sicherheit zu garantieren. Derartige Verfahren bedenken darüberhinaus auch den Fall, dass ungültige Klartexte unbeabsichtigt nach außen gelangen, was insbesondere in Umgebungen relevant ist, in denen sie nicht bis zur erfolgreichen Verifikation gespeichert werden können. Die vorliegende Arbeit stellt drei blockchiffrenbasierte Verfahren für misuse-resiliente authentisierte Verschlüsselung vor: RIV, SIV-x und DCT. RIV bietet Robustheit gegen Nonce-Wiederholungen wie auch gegen die Fälle in denen Informationen über ungültige Entschlüsselungen nach außen gelangen. SIV-x und DCT bieten sehr hohe Sicherheitsgarantien ohne auf Nonces angewiesen zu sein, jeweils basierend auf tweakable Blockchiffren. Im ersten Teil möchte die vorliegende Arbeit zum Einen das Verständnis der differentiellen Sicherheit des rundenreduzierten AES hin zu Unterscheidungsangriffen mit extrem kleinen, aber dennoch signifikanten Differenzen ergänzen. Zum Anderen erweitert dieser Teil die Analyse AES-ähnlicher Tweakable Blockchiffren. Der zweite Teil ergänzt zum Einen mit RIV das Portfolio robuster authentisierter Verschlüsselungsverfahren und zeigt wie diese effizient implementiert werden können. Zum Anderen zeigt er mit SIV-x und DCT, wie deterministische authentisierte Verschlüsselung mit hohen Sicherheitsanforderungen mit zwei Iterationen von denen nur eine pseudozufällig sein muss realisiert werden können. KW - Kryptologie KW - Cryptography KW - Symmetric-key cryptography KW - Cryptanalysis KW - Provable security KW - Encryption Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211103-45235 ER - TY - THES A1 - Mauludin, Luthfi Muhammad T1 - Computational Modeling of Fracture in Encapsulation-Based Self-Healing Concrete Using Cohesive Elements N2 - Encapsulation-based self-healing concrete has received a lot of attention nowadays in civil engineering field. These capsules are embedded in the cementitious matrix during concrete mixing. When the cracks appear, the embedded capsules which are placed along the path of incoming crack are fractured and then release of healing agents in the vicinity of damage. The materials of capsules need to be designed in a way that they should be able to break with small deformation, so the internal fluid can be released to seal the crack. This study focuses on computational modeling of fracture in encapsulation-based selfhealing concrete. The numerical model of 2D and 3D with randomly packed aggreates and capsules have been developed to analyze fracture mechanism that plays a significant role in the fracture probability of capsules and consequently the self-healing process. The capsules are assumed to be made of Poly Methyl Methacrylate (PMMA) and the potential cracks are represented by pre-inserted cohesive elements with tension and shear softening laws along the element boundaries of the mortar matrix, aggregates, capsules, and at the interfaces between these phases. The effects of volume fraction, core-wall thickness ratio, and mismatch fracture properties of capsules on the load carrying capacity of self-healing concrete and fracture probability of the capsules are investigated. The output of this study will become valuable tool to assist not only the experimentalists but also the manufacturers in designing an appropriate capsule material for self-healing concrete. KW - beton KW - Bruch KW - self healing concrete KW - cohesive elements KW - Fracture KW - Fracture Computational Model Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211008-45204 ER - TY - THES A1 - Berhe, Asgedom Haile T1 - Mitigating Risks of Corruption in Construction: A theoretical rationale for BIM adoption in Ethiopia N2 - This PhD thesis sets out to investigate the potentials of Building Information Modeling (BIM) to mitigate risks of corruption in the Ethiopian public construction sector. The wide-ranging capabilities and promises of BIM have led to the strong perception among researchers and practitioners that it is an indispensable technology. Consequently, it has become the frequent subject of science and research. Meanwhile, many countries, especially the developed ones, have committed themselves to applying the technology extensively. Increasing productivity is the most common and frequently cited reason for that. However, both technology developers and adopters are oblivious to the potentials of BIM in addressing critical challenges in the construction sector, such as corruption. This particularly would be significant in developing countries like Ethiopia, where its problems and effects are acute. Studies reveal that bribery and corruption have long pervaded the construction industry worldwide. The complex and fragmented nature of the sector provides an environment for corruption. The Ethiopian construction sector is not immune from this epidemic reality. In fact, it is regarded as one of the most vulnerable sectors owing to varying socio-economic and political factors. Since 2015, Ethiopia has started adopting BIM, yet without clear goals and strategies. As a result, the potential of BIM for combating concrete problems of the sector remains untapped. To this end, this dissertation does pioneering work by showing how collaboration and coordination features of the technology contribute to minimizing the opportunities for corruption. Tracing loopholes, otherwise, would remain complex and ineffective in the traditional documentation processes. Proceeding from this anticipation, this thesis brings up two primary questions: what are areas and risks of corruption in case of the Ethiopian public construction projects; and how could BIM be leveraged to mitigate these risks? To tackle these and other secondary questions, the research employs a mixed-method approach. The selected main research strategies are Survey, Grounded Theory (GT) and Archival Study. First, the author disseminates an online questionnaire among Ethiopian construction engineering professionals to pinpoint areas of vulnerability to corruption. 155 responses are compiled and scrutinized quantitatively. Then, a semi-structured in-depth interview is conducted with 20 senior professionals, primarily to comprehend opportunities for and risks of corruption in those identified highly vulnerable project stages and decision points. At the same time, open interviews (consultations) are held with 14 informants to be aware of state of the construction documentation, BIM and loopholes for corruption in the country. Consequently, these qualitative data are analyzed utilizing the principles of GT, heat/risk mapping and Social Network Analysis (SNA). The risk mapping assists the researcher in the course of prioritizing corruption risks; whilst through SNA, methodically, it is feasible to identify key actors/stakeholders in the corruption venture. Based on the generated research data, the author constructs a [substantive] grounded theory around the elements of corruption in the Ethiopian public construction sector. This theory, later, guides the subsequent strategic proposition of BIM. Finally, 85 public construction related cases are also analyzed systematically to substantiate and confirm previous findings. By ways of these multiple research endeavors that is based, first and foremost, on the triangulation of qualitative and quantitative data analysis, the author conveys a number of key findings. First, estimations, tender document preparation and evaluation, construction material as well as quality control and additional work orders are found to be the most vulnerable stages in the design, tendering and construction phases respectively. Second, middle management personnel of contractors and clients, aided by brokers, play most critical roles in corrupt transactions within the prevalent corruption network. Third, grand corruption persists in the sector, attributed to the fact that top management and higher officials entertain their overriding power, supported by the lack of project audits and accountability. Contrarily, individuals at operation level utilize intentional and unintentional 'errors’ as an opportunity for corruption. In light of these findings, two conceptual BIM-based risk mitigation strategies are prescribed: active and passive automation of project audits; and the monitoring of project information throughout projects’ value chain. These propositions are made in reliance on BIM’s present dimensional capabilities and the promises of Integrated Project Delivery (IPD). Moreover, BIM’s synchronous potentials with other technologies such as Information and Communication Technology (ICT), and Radio Frequency technologies are topics which received a treatment. All these arguments form the basis for the main thesis of this dissertation, that BIM is able to mitigate corruption risks in the Ethiopian public construction sector. The discourse on the skepticisms about BIM that would stem from the complex nature of corruption and strategic as well as technological limitations of BIM is also illuminated and complemented by this work. Thus, the thesis uncovers possible research gaps and lays the foundation for further studies. KW - Building Information Modeling KW - Korruption KW - Risikomanagement KW - Äthiopien KW - Corruption KW - BIM KW - Risk management KW - Construction KW - Ethiopia Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211007-45175 ER - TY - THES A1 - Fauth, Judith T1 - Ein handlungsorientiertes Entscheidungsmodell zur Feststellung der Genehmigungsfähigkeit von Bauvorhaben N2 - Die Auseinandersetzung mit der Digitalisierung ist in den letzten Jahren in den Medien, auf Konferenzen und in Ausschüssen der Bau- und Immobilienbranche angekommen. Während manche Bereiche Neuerungen hervorbringen und einige Akteure als Pioniere zu bezeichnen sind, weisen andere Themen noch Defizite hinsichtlich der digitalen Transformation auf. Zu dieser Kategorie kann auch das Baugenehmigungsverfahren gezählt werden. Unabhängig davon, wie Architekten und Ingenieure in den Planungsbüros auf innovative Methoden setzen, bleiben die Bauvorlagen bisher zuhauf in Papierform oder werden nach der elektronischen Einreichung in der Behörde ausgedruckt. Vorhandene Ressourcen, beispielsweise in Form eines Bauwerksinformationsmodells, die Unterstützung bei der Baugenehmigungsfeststellung bieten können, werden nicht ausgeschöpft. Um mit digitalen Werkzeugen eine Entscheidungshilfe für die Baugenehmigungsbehörden zu erarbeiten, ist es notwendig, den Ist-Zustand zu verstehen und Gegebenheiten zu hinterfragen, bevor eine Gesamtautomatisierung der innerbehördlichen Vorgänge als alleinige Lösung zu verfolgen ist. Mit einer inhaltlich-organisatorischen Betrachtung der relevanten Bereiche, die Einfluss auf die Baugenehmigungsfeststellung nehmen, wird eine Optimierung des Baugenehmigungsverfahrens in den Behörden angestrebt. Es werden die komplexen Bereiche, wie die Gesetzeslage, der Einsatz von Technologie aber auch die subjektiven Handlungsalternativen, ermittelt und strukturiert. Mit der Entwicklung eines Modells zur Feststellung der Baugenehmigungsfähigkeit wird sowohl ein Verständnis für Einflussfaktoren vermittelt als auch eine Transparenzsteigerung für alle Beteiligten geschaffen. Neben einer internationalen Literaturrecherche diente eine empirische Studie als Untersuchungsmethode. Die empirische Studie wurde in Form von qualitativen Experteninterviews durchgeführt, um den Ist-Zustand im Bereich der Baugenehmigungsverfahren festzustellen. Das erhobene Datenmaterial wurde aufbereitet und anschließend einer softwaregestützten Inhaltsanalyse unterzogen. Die Ergebnisse wurden in Kombination mit den Erkenntnissen der Literaturrecherche in verschiedenen Analysen als Modellgrundlage aufgearbeitet. Ergebnis der Untersuchung stellt ein Entscheidungsmodell dar, welches eine Lücke zwischen den gegenwärtigen Abläufen in den Baubehörden und einer Gesamtautomatisierung der Baugenehmigungsprüfung schließt. Die prozessorientierte Strukturierung entscheidungsrelevanter Sachverhalte im Modell ermöglicht eine Unterstützung bei der Baugenehmigungsfeststellung für Prüfer und Antragsteller. Das theoretische Modell konnte in Form einer Webanwendung in die Praxis übertragen werden. N2 - In recent years, the debate on digitization has been a topic of discussion in the media, at conferences and in committees of the construction and real estate industry. While some areas are producing innovations and some actors can be called pioneers, others still have deficits with regard to the digital transformation. The building permit process can also be considered among this category. Regardless of how architects and engineers use innovative methods in the planning offices, building applications are still often in paper form or are printed out after electronic submission to the authorities. Existing resources, for example in the form of a building information model, which can provide support in obtaining building permits, are not being utilized. In order to develop a decision support for the building authorities with digital tools, it is necessary to understand the actual conditions and to question the circumstances before an overall automation of the internal official processes can be pursued as the sole solution. With a content-based organizational view of the relevant components, which take influence on the building permit determination, an optimization of the building permit procedure in the authorities is aimed at. The complex components, such as the legal situation, the use of technology, but also the subjective alternatives for action, have to be determined and structured. The development of a model for determining building permit ability provides both an understanding of influencing factors and an increase in transparency for all parties involved. In addition to an international literature review, an empirical study served as a method of investigation. The empirical study was conducted in the form of qualitative expert interviews to determine the current state in the field of building permit procedures. The collected data material was prepared and subjected to a software-supported content analysis. In combination with the results of the literature review, the results were processed in various analyses as a model basis. The result of the investigation represents a decision model which closes a gap between the current processes at the building authorities and an overall automation of the building permit review. The process-oriented structuring of decision-relevant factors in the model enables support for the reviewers and the applicants during the building permit assessment. The theoretical model could be transferred into practice in the form of a web application. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 39 KW - Baugenehmigung KW - Entscheidungsmodell KW - Bauantrag KW - Prozessmanagement KW - Projektmanagement KW - Building Permit KW - Decision-making KW - Building application KW - Process management KW - Project management Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210928-45093 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/4602 SN - 978-3-95773-299-6 N1 - Die englische Übersetzung der Dissertation ist unter https://doi.org/10.25643/bauhaus-universitaet.4602 erfasst und hier als URL Link hinterleg PB - Bauhaus-Universitätsverlag CY - Ilmtal-Weinstraße ER - TY - THES A1 - Müller, Matthias T1 - Frost-Tausalz-Angriff auf Beton - Neue Erkenntnisse zum Schadensmechanismus N2 - Für die Verminderung der betonspezifischen CO2-Emissionen wird ein verstärkter Einsatz klinkerreduzierter Zemente bzw. Betone angestrebt. Die Reduzierung des Klinkergehaltes darf jedoch nicht zu einer lebensdauerrelevanten Beeinträchtigung der Betondauerhaftigkeit führen. In diesem Zusammenhang stellt der Frost-Tausalz-Widerstand eine kritische Größe dar, da er bei höheren Klinkersubstitutionsraten häufig negativ beeinflusst wird. Erschwerend kommt hinzu, dass für klinkerreduzierte Betone nur ein unzureichender Erfahrungsschatz vorliegt. Ein hoher Frost-Tausalz-Widerstand kann daher nicht ausschließlich anhand deskriptiver Vorgaben gewährleistet werden. Demgemäß sollte perspektivisch auch für frost-tausalzbeanspruchte Bauteile eine performancebasierte Lebensdauerbetrachtung erfolgen. Eine unverzichtbare Grundlage für das Erreichen dieser Ziele ist ein Verständnis für die Schadensvorgänge beim Frost-Tausalz-Angriff. Der Forschungsstand ist jedoch geprägt von widersprüchlichen Schadenstheorien. Somit wurde als Zielstellung für diese Arbeit abgeleitet, die existierenden Schadenstheorien unter Berücksichtigung des aktuellen Wissensstandes zu bewerten und mit eigenen Untersuchungen zu prüfen und einzuordnen. Die Sichtung des Forschungsstandes zeigte, dass nur zwei Theorien das Potential haben, den Frost-Tausalz-Angriff umfassend abzubilden – die Glue Spall Theorie und die Cryogenic Suction Theorie. Die Glue Spall Theorie führt die Entstehung von Abwitterungen auf die mechanische Schädigung der Betonoberfläche durch eine anhaftende Eisschicht zurück. Dabei sollen nur bei moderaten Tausalzkonzentrationen in der einwirkenden Lösung kritische Spannungszustände in der Eisschicht auftreten, die eine Schädigung der Betonoberfläche hervorrufen können. In dieser Arbeit konnte jedoch nachgewiesen werden, dass starke Abwitterungen auch bei Tausalz¬konzentrationen auftreten, bei denen eine mechanische Schädigung des Betons durch das Eis auszuschließen ist. Damit wurde die fehlende Eignung der Glue Spall Theorie aufgezeigt. Die Cryogenic Suction Theorie fußt auf den eutektischen Eigenschaften von Tausalz-lösungen, die im gefrorenen Zustand immer als Mischung auf festem Wassereis und flüssiger, hochkonzentrierter Salzlösung bestehen, solange ihre Eutektikumstemperatur nicht unter¬schritten wird. Die flüssige Phase im salzhaltigen Eis stellt für gefrorenen Beton ein bisher nicht berücksichtigtes Flüssigkeitsreservoir dar, welches trotz der hohen Salzkonzentration die Eisbildung in der Betonrandzone verstärken und so die Entstehung von Abwitterungen verursachen soll. In dieser Arbeit wurde bestätigt, dass die Eisbildung im Zementstein beim Gefrieren in hochkonzentrierter Tausalzlösung tatsächlich verstärkt wird. Das Ausmaß der zusätzlichen Eisbildung wurde dabei auch von der Fähigkeit des Zementsteins zur Bindung von Chloridionen aus der Tausalzlösung beeinflusst. Zusammenfassend wurde festgestellt, dass die Cryogenic Suction Theorie eine gute Beschreibung des Frost-Tausalz-Angriffes darstellt, aber um weitere Aspekte ergänzt werden muss. Die Berücksichtigung der intensiven Sättigung von Beton durch den Prozess der Mikroeislinsenpumpe stellt hier die wichtigste Erweiterung dar. Basierend auf dieser Überlegung wurde eine kombinierte Schadenstheorie aufgestellt. Wichtige Annahmen dieser Theorie konnten experimentell bestätigt werden. Im Ergebnis wurde so die Grundlage für ein tiefergehendes Verständnis des Frost-Tausalz-Angriffes geschaffen. Zudem wurde ein neuer Ansatz identifiziert, um die (potentielle) Verringerung des Frost-Tausalz-Widerstandes klinkerreduzierter Betone zu erklären. N2 - The reduction of the cement clinker content is an important prerequisite for the improvement of the CO2-footprint of concrete. Nevertheless, the durability of such concretes must be sufficient to guarantee a satisfactory service life of structures. Salt frost scaling resistance is a critical factor in this regard, as it is often diminished at increased clinker substitution rates. Furthermore, only insufficient long-term experience for such concretes exists. A high salt frost scaling resistance thus cannot be achieved by applying only descriptive criteria, such as the concrete composition. It is therefore to be expected, that in the long term a performance based service life prediction will replace the descriptive concept. To achieve the important goal of clinker reduction for concretes also in cold and temperate climates it is important to understand the underlying mechanisms for salt frost scaling. However, conflicting damage theories dominate the current State of the Art. It was consequently derived as the goal of this thesis to evaluate existing damage theories and to examine them experimentally. It was found that only two theories have the potential to describe the salt frost attack satisfactorily – the glue spall theory and the cryogenic suction theory. The glue spall theory attributes the surface scaling to the interaction of an external ice layer with the concrete surface. Only when moderate amounts of deicing salt are present in the test solution the resulting mechanical properties of the ice can cause scaling. However, the results in this thesis indicate that severe scaling also occurs at deicing salt levels, at which the ice is much too soft to damage concrete. Thus, the inability of the glue spall theory to account for all aspects of salt frost scaling was shown. The cryogenic suction theory is based on the eutectic behavior of salt solutions, which consist of two phases – water ice and liquid brine – between the freezing point and the eutectic temperature. The liquid brine acts as an additional moisture reservoir, which facilitates the growth of ice lenses in the surface layer of the concrete. The experiments in this thesis confirmed, that the ice formation in hardened cement paste increases due to the suction of brine at sub-zero temperatures. The extent of additional ice formation was influenced mainly by the porosity and by the chloride binding capacity of the hardened cement paste. Consequently, the cryogenic suction theory plausibly describes the actual generation of scaling, but it has to be expanded by some crucial aspects to represent the salt frost scaling attack completely. The most important aspect is the intensive saturation process, which is ascribed to the so-called micro ice lens pump. Therefore a combined damage theory was proposed, which considers multiple saturation processes. Important aspects of this combined theory were confirmed experimentally. As a result, the combined damage theory constitutes a good basis to understand the salt frost scaling attack on concrete on a fundamental level. Furthermore, a new approach was identified, to account for the reduced salt frost scaling resistance of concretes with reduced clinker content. KW - Beton KW - Frost KW - Beton KW - Frost-Tausalz-Angriff KW - Schadensmechanismus KW - Concrete KW - Salt-Frost-Attack Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210922-45025 ER - TY - THES A1 - Ruhland, Grit T1 - FOLGELANDSCHAFT. Eine Untersuchung der Auswirkungen des Uranbergbaus auf die Landschaft um Gera/Ronneburg. N2 - Das Kernthema dieser Arbeit ist die Beschäftigung mit den Folgen des Uranbergbaus in dem Gebiet um die ehemalige Abbauregion der Wismut SAG/SDAG in Ronneburg (Ostthüringen). Dieses Thema wird unter historischen, sozialen, kulturanthropologischen und künstlerischen Aspekten betrachtet und in den Zusammenhang mit den weltweiten Voraussetzungen der Nuklearindustrie und Auswirkungen des Uranbergbaus und seiner Folgen gestellt. Die Arbeit legt dar, wie eine Uranbergbaufolgelandschaft entsteht und welches Wissen ist für ein angemessenes Verständnis des Phänomens wichtig ist. Es wird untersucht, ob Kunst bezüglich der Uranbergbaufolgelandschaft einen relevanten Beitrag leisten kann bzw. in welcher Form dies versucht wurde, bzw. stellte Arbeiten vor, die verwandete Themen bearbeitet haben. In Kombination dieser beiden Hauptaspekte geht die Arbeit der Frage nach, welche Faktoren die Uranbergbaufolgelandschaft prägen und ob es sinnvolle Beteiligungsfelder für künstlerisches Forschen oder Handeln gibt sowie welche Bedingungen hierfür erfüllt werdenmüssten. Die Kernthese der Arbeit ist, dass künstlerische Arbeiten im Themenfeld des Uranbergbaus unter bestimmten Bedingungen relevante Beiträge leisten können. N2 - This thesis is exploring the consequences of uranium mining in the area around the former mining region of the Wismut SAG / SDAG in Ronneburg (East Thuringia), East Germany. The topic is viewed from historical, social, cultural-anthropological and artistic aspects and placed in the context of the worldwide requirements of the nuclear industry and the effects of uranium mining and its consequences. The thesis explains how a uranium mining landscape is created and what knowledge is important for an adequate understanding of the phenomenon. It is examined whether art can make a relevant contribution in dealing with the uranium mining landscape. It discusses artworks that have dealt with related topics. In combination of these two main aspects, the thesis investigates the question which factors shape the uranium mining landscape and whether there are meaningful fields of participation for artistic research and which conditions would have to be met for this. The core thesis of the work is that artistic work in the field of uranium mining can make relevant contributions under certain conditions. It also contains field research, interviews and the description and application of a method called "random-structured landscape observation". KW - Uranbergbau KW - Nachbergbau KW - Geiger-Müller-Zählrohr KW - Kerntechnische Industrie KW - Nuclear Art KW - Environmental Art KW - Künstlerische Forschung KW - Artistic Research KW - Geigerzähler KW - Nuklearindustrie KW - Atomindustrie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210906-44953 ER - TY - THES A1 - Hörold, Stefan T1 - Leistungsbezogene Musterjahresganglinien für den Straßenbetriebsdienst N2 - In den letzten Jahrzehnten unterlag der Straßenbetriebsdienst tiefgreifenden Veränderungen. Diese Veränderungen schließt auch die betriebliche Steuerungsphilosophie ein, um eine planungsrationale und ökonomische Gestaltung des Straßenbetriebsdienstes zu unterstützen. Dabei erfolgt eine verbindliche Vorgabe der Leistungsinhalte und -umfänge und ermöglicht eine Budgetierung für das vorgesehene Jahresarbeitsprogramm. Ziel der Untersuchung ist die Entwicklung eines Modells für die Ermittlung von leistungsbezogenen Musterjahresganglinien zur Unterstützung der Jahresarbeitsplanung. Dafür lagen für jede Leistung des Leistungsbereiches „Grünpflege“ jeweils 260 einzelne Jahresganglinien vor. Im Ergebnis der Untersuchung wird die leistungsbezogene Musterjahresganglinie in vier Schritten ermittelt. Im ersten Schritt erfolgt die Prüfung der Datenqualität; im zweiten Schritt eine Korrelationsanalyse; im dritten Schritt die fachliche Überprüfung der Leistungsausprägung und im vierten Schritt die Ermittlung der leistungsbezogenen Musterjahresganglinie aus den verbliebenen leistungsbezogenen Jahresganglinien. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 40 KW - Straßenbetriebsdienst KW - Budgetierung KW - Arbeitsplanung KW - Ergebnisorientierte Steuerung KW - Musterjahresganglinien KW - Jahresarbeitsplanung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210830-44910 ER - TY - THES A1 - Khademi Zahedi, Reza T1 - Stress Distribution in Buried Defective PE Pipes and Crack Propagation in Nanosheets N2 - Buried PE pipelines are the main choice for transporting hazardous hydrocarbon fluids and are used in urban gas distribution networks. Molecular dynamics (MD) simulations used to investigate material behavior at nanoscale. KW - Gasleitung KW - gas pipes KW - Riss KW - Defekt KW - defects KW - nanosheets KW - crack KW - maximum stress Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210803-44814 ER - TY - THES A1 - Shamskooshki, Hanieh T1 - Perception of Socio-Spatial Segregation: The Interaction of Physical and Social Urban Space-Study case of Tehran Neighborhoods N2 - “How to understand the interaction between urban space and social processes” is a significant question in urban studies. To answer that, the city needs to be recognized as both a physical and a social entity and urban theory and practice need to connect these (Hillier 2007). The present research aims to re-examine the complex correlation between spatial and social inequality manifestations in the city of Tehran regarding the concept of segregation. It observes the causes and consequences of segregation in Tehran and provides an insight into both concepts of socio-spatial segregation and neighborhood effects and creates a link between them. First, I argue when, where, and for whom spatial locations affect the chances of social networks in Tehran. Then, I discuss how neighborhood effects can emerge via social network mechanisms and thus affect the perceptions of residents in the neighborhoods. KW - Soziales Netzwerk KW - Socio-spatial Segregation KW - Urban Space KW - Neighborhood Effects KW - Social Networks Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210802-44666 ER - TY - THES A1 - Al Khatib, Khalid T1 - Computational Analysis of Argumentation Strategies N2 - The computational analysis of argumentation strategies is substantial for many downstream applications. It is required for nearly all kinds of text synthesis, writing assistance, and dialogue-management tools. While various tasks have been tackled in the area of computational argumentation, such as argumentation mining and quality assessment, the task of the computational analysis of argumentation strategies in texts has so far been overlooked. This thesis principally approaches the analysis of the strategies manifested in the persuasive argumentative discourses that aim for persuasion as well as in the deliberative argumentative discourses that aim for consensus. To this end, the thesis presents a novel view of argumentation strategies for the above two goals. Based on this view, new models for pragmatic and stylistic argument attributes are proposed, new methods for the identification of the modelled attributes have been developed, and a new set of strategy principles in texts according to the identified attributes is presented and explored. Overall, the thesis contributes to the theory, data, method, and evaluation aspects of the analysis of argumentation strategies. The models, methods, and principles developed and explored in this thesis can be regarded as essential for promoting the applications mentioned above, among others. KW - Argumentation KW - Natürliche Sprache KW - Argumentation Strategies KW - Sprachverarbeitung KW - Natural Language Processing KW - Computational Argumentation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210719-44612 ER - TY - THES A1 - Potocka, Anna T1 - Wearables: Kontrollregime zwischen Affekt und Technologie N2 - Überwachungspraktiken und –technologien sind in der heutigen Welt omnipräsent und wohl nicht mehr wegzudenken. Ob CCTV-Systeme, Biometrie oder Data Mining – unsere Gesellschaft befindet sich in einem ständigen Überwachungsmodus, der sich weit über einen begrenzten Raum oder zeitlichen Rahmen hinausstreckt. Überwacht wird überall: privat, am Arbeitsplatz oder im Cyberspace, und alles: Interaktionen, Äußerungen, Verhalten. Es werden Unmengen von Daten gesammelt, strukturiert, kombiniert, gekauft und verkauft. Dieser Modus stellt mehr als eine bloße Neuauflage des Bentham-Foucaultschen Panoptikons dar: der aktuelle Überwachungsmodus, die informationelle Asymmetrie als ihren tragenden Pfeiler beibehaltend, dient nicht nur der Disziplinierung, sondern viel mehr der Kontrolle, die nicht primär negativ-sanktionierend, sondern positiv-leistungssteigernd wirkt: es ist nicht das Ziel, die Individuen zu bestrafen und ein bestimmtes Verhalten zu verbieten, sondern sie durch Belohnung, Interaktion und spielerische Elemente dazu zu bringen, sich auf die gewünschte Art zu verhalten und im Endeffekt sich selbst zu überwachen. Die Kontrolle wird auf diese Weise zum zentralen Schauplatz der Machtausübung, die sich über das Beobachten, Speichern, Auswerten und Sortieren vollzieht. Diese Prozesse hinterlassen keinen Frei- oder Spielraum für Ambiguität; sie verwirklichen die Diktatur der klaren Kante, der Klassifizierung und Kategorisierung ohne Schattierungen. Die Macht selbst befindet sich in einem kontinuierlichen Fluss, sie ist ubiquitär, dennoch schwer lokalisierbar. Sie fungiert nicht mehr unter dem Signum einer pseudosakralen zentralen Instanz, sondern wird durch diverse Akteure und Assemblages kolportiert. Die durch sie implizierten Praktiken der Selbstkontrolle, kulturgeschichtlich ebenfalls religiös oder zumindest philosophisch konnotiert, sind die neuen Rituale des Sehens und Gesehen-Werdens. Im Zeitalter der elektronischen Datentechnologien gibt es diverse Agenten der Überwachung. Vom besonderen Interesse sind dabei die Wearables, weil sie intim, affektiv und haptisch arbeiten und so, über das Sehen und Gesehen-Werden hinaus, das Berühren und Berührt-Werden und somit die Neuregulierung von Nähe und Distanz ins Spiel bringen. Sie schreiben sich zwar in eine Vermessungstradition eins, die ihre Ursprünge mindestens im 19. Jahrhundert hat, unterscheiden sich aber von dieser in ihrer Intensität und Sinnlichkeit. KW - Technologie KW - Wearables KW - Medien KW - Überwachung KW - Kontrolle KW - Objektverfolgung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210713-44594 ER - TY - THES A1 - Gründer, Anika T1 - Denkmalzugänge zwischen Abgrenzen, Genießen, Erinnern und Teilhaben BT - Eine Ethnografie über Schloss Bedheim und seine Besucher N2 - Die interdisziplinäre Dissertationsschrift lässt sich im Horizont internationaler Forschungen zu Denkmalwerten, neuer Ansätze in der Kultur- und Wissensvermittlung rund um Baudenkmale sowie künstlerisch- ethnographischem Forschen an und mit Denkmalen verorten. Der erste Teil der Arbeit widmet sich Denkmalen und der Denkmalpflege im Kontext künstlerischer und sozialwissenschaftlicher Allianzen. Ausgangspunkt ist die Feststellung, dass die Denkmalpflege zwar sehr vieles über Denkmale weiß, aber kaum etwas über deren Rezeption beim breiten Publikum. Im Mittelpunkt steht die Frage, wie hier Praktiken der bildenden Kunst und Arbeitsweisen der Kulturanthropologie die Disziplin der Denkmalpflege bereichern können, oder sogar müssen. Den zweiten Teil bildet eine empirische Studie, in der die populäre Wahrnehmung von Denkmalen qualitativ erforscht wird. Das Schloss und Rittergut Bedheim im südlichen ländlichen Thüringen dient dabei als konkreter Untersuchungsort. Reaktionen von Besucherinnen und Besuchern werden mit Hilfe von drei künstlerischen Eingriffen angeregt und diese dann ethnographisch-offen dokumentiert und ausgewertet. Auf dieser Basis werden Zugänge zum Denkmal ermittelt. Während die meisten BesucherInnen das Denkmal als „Arbeit“ wahrnehmen, geraten einige ins „Träumen“ oder „Erinnern“, man „genießt“ das Ensemble als authentische und ästhetische Ressource, oder findet Zugang über das spontane „Erklären“ baukonstruktiver oder baulicher Situationen. Für andere bedeutet der Besuch die „Teilhabe“ an einem Prozess. Schloss Bedheim wird als Ort stetiger Veränderung geschätzt. In der Wahrnehmung der BesucherInnen verquicken sich Aspekte des Bewunderns mit solchen des Abgrenzens. Die eigene Alltagswelt und das eigene Zuhause bilden hierbei Bezugspunkte. Schloss Bedheim wird auf diese Weise zum Imaginationsraum, zur Energietankstelle und zur gern besuchten Problemwelt. Die Ergebnisse der Arbeit liegen in zwei Erkenntnisfeldern: Auf einer methodischen Ebene zeigt sie, wie in der Denkmalpflege vertiefte Fachlichkeit mit einer tatsächlichen Kontaktaufnahme mit dem Publikum verbunden werden kann und damit soziale Gefüge an Baudenkmalen qualitativ ermittelt werden können. Ebenso wird deutlich, dass künstlerische Eingriffe Auslöser von Gesprächen sind, als Kontaktflächen zur Alltagswelt dienen und so zu einer vielfältigen Auseinandersetzung mit Denkmalen führen. Auf einer inhaltlichen Ebene liefert die Arbeit Erkenntnisse zu Wahrnehmungsweisen von Denkmalen. Neben den erwähnten Zugängen, wird die Existenz und Bedeutung einer regional vernetzten Wahrnehmung von Denkmalen aufgedeckt. Des Weiteren zeigen die Ergebnisse, dass das Öffnen von Baudenkmalen als und im Prozess ungenutzte Potentiale birgt und es wird angeregt, dies in zukünftigen denkmalpflegerischen Konzepten eine größere Rolle spielen zu lassen. Die Vision eines „Kompendiums der Zugänge“ wird entwickelt, mit dessen Hilfe sich ein enormes Wissen über Rollen und Bedeutungen die Baudenkmale in unserer Gesellschaft spielen, sammeln ließe. KW - Denkmalpflege KW - Ethnologie KW - Kunst KW - Teilnehmende Beobachtung KW - Schloss KW - Ethnografie KW - Denkmalwerte KW - Kunst-Denkmal-Kollaborationen KW - Vermittlung KW - Ländlicher Raum Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210628-44569 ER - TY - THES A1 - Foka, Zinovia T1 - The Space In-Between. Tracing Transformative Processes in Nicosia’s Buffer Zone. N2 - This thesis examines urban partition in Nicosia, the capital of Cyprus, and how its changing roles and shifting perceptions in a post-conflict setting reflect power relations, and their constant renegotiation. Nicosia, the capital of Cyprus, was officially divided in 1974 in the aftermath of an eighteen-year-long conflict between the island’s Turkish- and Greek-Cypriot communities. As a result, a heavily militarized Buffer Zone, established as an emergency measure against perpetuation of intercommunal violence, has been cutting through its historic centre ever since. This thesis departs from a genuine interest in the material and ideational dimensions of urban partition. How is it constructed, not merely in physical terms but in the minds of the societies affected by conflict? How is it established in official and everyday discourses? What kinds of mechanisms have been developed to maintain it, and make an inseparable part of the urban experience? Moreover, taking into account the consensus in relevant literature pertaining to the imperative for its removal, this thesis is inquiring into the relevance of peace agreements to overcoming urban partition. For this purpose, it also looks at narratives and practices that have attempted to contest it. The examples examined in this thesis offer pregnant analytical moments to understand Nicosia’s Buffer Zone as a dynamic social construct, accommodating multiple visions of and for the city. Its space ‘in-between’ facilitates encounters between various actors, accommodates new meanings, socio-spatial practices and diverse imaginaries. In this sense, urban partition is explored in this thesis as a phenomenon that transcends scales as well as temporalities, entwining past, present, and future. KW - Stadtforschung KW - Stadt KW - Zypern KW - urban partition KW - genealogy KW - space; power; knowledge KW - urban heritage KW - socio-spatial practices KW - Stadt / Teilung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210531-44447 ER - TY - THES A1 - Alkam, Feras T1 - Vibration-based Monitoring of Concrete Catenary Poles using Bayesian Inference N2 - This work presents a robust status monitoring approach for detecting damage in cantilever structures based on logistic functions. Also, a stochastic damage identification approach based on changes of eigenfrequencies is proposed. The proposed algorithms are verified using catenary poles of electrified railways track. The proposed damage features overcome the limitation of frequency-based damage identification methods available in the literature, which are valid to detect damage in structures to Level 1 only. Changes in eigenfrequencies of cantilever structures are enough to identify possible local damage at Level 3, i.e., to cover damage detection, localization, and quantification. The proposed algorithms identified the damage with relatively small errors, even at a high noise level. KW - Parameteridentifikation KW - Bayesian Inference, Uncertainty Quantification KW - Inverse Problems KW - Damage Identification KW - Concrete catenary pole KW - SHM KW - Inverse Probleme KW - Bayes’schen Inferenz KW - Unschärfequantifizierung KW - Schadenerkennung KW - Oberleitungsmasten Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210526-44338 UR - https://asw-verlage.de/katalog/vibration_based_monitoring_of_co-2363.html VL - 2021 PB - Bauhaus-Universitätsverlag CY - Weimar ER - TY - THES A1 - Spröte, Daniel T1 - Immobilienportfoliomanagement öffentlicher musealer Schlösserverwaltungen - Daten zur Investitionssteuerung N2 - Die Arbeit leistet einen wissenschaftlichen Beitrag zur Erforschung der Einsatzmöglichkeiten eines Immobilienportfoliomanagements für öffentliche museale Schlösserverwaltungen in Deutschland. Insbesondere wird ein für deren Organisation spezifisches Modell zur Investitionssteuerung herausgearbeitet und dessen Anwendbarkeit in der Praxis mit Experten diskutiert. KW - Unbewegliche Sache KW - Portfoliomanagement KW - Museum KW - Schloss KW - Investition Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210510-44260 ER - TY - THES A1 - Baron, Nicole T1 - Natural Urban Resilience: Understanding general urban resilience through Addis Ababa’s inner city N2 - This dissertation describes the urban actors and spatial practices that contribute to natural urban resilience in Addis Ababa’s inner city. Natural urban resilience is a non-strategical and bottom-up, everyday form of general urban resilience – an urban system’s ability to maintain its essential characteristics under any change. This study gains significance by exposing conceptual gaps in the current un-derstanding of general urban resilience and highlighting its unconvincing applicability to African cities. This study attains further relevance by highlighting the danger of the ongoing large-scale redevelopment of the inner city. The inner city has naturally formed, and its urban memory, spaces, and social cohesion contribute to its primarily low-income population’s resilience. This thesis argues that the inner city’s demolition poses an incalculable risk of maladaptation to future stresses and shocks for Addis Ababa. The city needs a balanced urban discourse that highlights the inner city’s qualities and suggests feasible urban transformation measures. “Natural Urban Resilience” contributes an empirical study to the debate by identifying those aspects of the inner city that contribute to general resilience and identifies feasible action areas. This study develops a qualitative research design for a single case study in Addis Ababa. The data is obtained through expert interviews, interviews with resi-dents, and the analysis of street scene photos, which are abstracted using Grounded Theory. That way, this thesis provides first-time knowledge about who and what generates urban resilience in the inner city of Addis Ababa and how. Furthermore, the study complements existing theories on general urban resilience. It provides a detailed understanding of the change mechanisms in resilience, of which it identifies four: adaptation, upgrading, mitigation, and resistance. It also adapts the adaptive cycle, a widely used concept in resilience thinking, conceptually for urban environments. The study concludes that the inner city’s continued redevelopment poses an incalculable threat to the entire city. Therefore, “Natural urban resilience” recommends carefully weighing any intervention in the inner city to promote Addis Ababa’s overall resilience. This dissertation proposes a pattern language for natural urban resilience to support these efforts and to translate the model of natural urban resilience into practice. KW - Stadtforschung KW - Urbanistik KW - Stadtsoziologie KW - Urban studies KW - Urban resilience KW - Built environment KW - Co-production KW - Grounded theory Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210428-44166 ER - TY - THES A1 - Ren, Huilong T1 - Dual-horizon peridynamics and Nonlocal operator method N2 - In the last two decades, Peridynamics (PD) attracts much attention in the field of fracture mechanics. One key feature of PD is the nonlocality, which is quite different from the ideas in conventional methods such as FEM and meshless method. However, conventional PD suffers from problems such as constant horizon, explicit algorithm, hourglass mode. In this thesis, by examining the nonlocality with scrutiny, we proposed several new concepts such as dual-horizon (DH) in PD, dual-support (DS) in smoothed particle hydrodynamics (SPH), nonlocal operators and operator energy functional. The conventional PD (SPH) is incorporated in the DH-PD (DS-SPH), which can adopt an inhomogeneous discretization and inhomogeneous support domains. The DH-PD (DS-SPH) can be viewed as some fundamental improvement on the conventional PD (SPH). Dual formulation of PD and SPH allows h-adaptivity while satisfying the conservations of linear momentum, angular momentum and energy. By developing the concept of nonlocality further, we introduced the nonlocal operator method as a generalization of DH-PD. Combined with energy functional of various physical models, the nonlocal forms based on dual-support concept are derived. In addition, the variation of the energy functional allows implicit formulation of the nonlocal theory. At last, we developed the higher order nonlocal operator method which is capable of solving higher order partial differential equations on arbitrary domain in higher dimensional space. Since the concepts are developed gradually, we described our findings chronologically. In chapter 2, we developed a DH-PD formulation that includes varying horizon sizes and solves the "ghost force" issue. The concept of dual-horizon considers the unbalanced interactions between the particles with different horizon sizes. The present formulation fulfills both the balances of linear momentum and angular momentum exactly with arbitrary particle discretization. All three peridynamic formulations, namely bond based, ordinary state based and non-ordinary state based peridynamics can be implemented within the DH-PD framework. A simple adaptive refinement procedure (h-adaptivity) is proposed reducing the computational cost. Both two- and three- dimensional examples including the Kalthoff-Winkler experiment and plate with branching cracks are tested to demonstrate the capability of the method. In chapter 3, a nonlocal operator method (NOM) based on the variational principle is proposed for the solution of waveguide problem in computational electromagnetic field. Common differential operators as well as the variational forms are defined within the context of nonlocal operators. The present nonlocal formulation allows the assembling of the tangent stiffness matrix with ease, which is necessary for the eigenvalue analysis of the waveguide problem. The present formulation is applied to solve 1D Schrodinger equation, 2D electrostatic problem and the differential electromagnetic vector wave equations based on electric fields. In chapter 4, a general nonlocal operator method is proposed which is applicable for solving partial differential equations (PDEs) of mechanical problems. The nonlocal operator can be regarded as the integral form, ``equivalent'' to the differential form in the sense of a nonlocal interaction model. The variation of a nonlocal operator plays an equivalent role as the derivatives of the shape functions in the meshless methods or those of the finite element method. Based on the variational principle, the residual and the tangent stiffness matrix can be obtained with ease. The nonlocal operator method is enhanced here also with an operator energy functional to satisfy the linear consistency of the field. A highlight of the present method is the functional derived based on the nonlocal operator can convert the construction of residual and stiffness matrix into a series of matrix multiplications using the predefined nonlocal operators. The nonlocal strong forms of different functionals can be obtained easily via the concept of support and dual-support. Several numerical examples of different types of PDEs are presented. In chapter 5, we extended the NOM to higher order scheme by using a higher order Taylor series expansion of the unknown field. Such a higher order scheme improves the original NOM in chapter 3 and chapter 4, which can only achieve one-order convergence. The higher order NOM obtains all partial derivatives with specified maximal order simultaneously without resorting to shape functions. The functional based on the nonlocal operators converts the construction of residual and stiffness matrix into a series of matrix multiplication on the nonlocal operator matrix. Several numerical examples solved by strong form or weak form are presented to show the capabilities of this method. In chapter 6, the NOM proposed as a particle-based method in chapter 3,4,5, has difficulty in imposing accurately the boundary conditions of various orders. In this paper, we converted the particle-based NOM into a scheme with interpolation property. The new scheme describes partial derivatives of various orders at a point by the nodes in the support and takes advantage of the background mesh for numerical integration. The boundary conditions are enforced via the modified variational principle. The particle-based NOM can be viewed a special case of NOM with interpolation property when nodal integration is used. The scheme based on numerical integration greatly improves the stability of the method, as a consequence, the operator energy functional in particle-based NOM is not required. We demonstrated the capabilities of current method by solving the gradient solid problems and comparing the numerical results with the available exact solutions. In chapter 7, we derived the DS-SPH in solid within the framework of variational principle. The tangent stiffness matrix of SPH can be obtained with ease, and can be served as the basis for the present implicit SPH. We proposed an hourglass energy functional, which allows the direct derivation of hourglass force and hourglass tangent stiffness matrix. The dual-support is {involved} in all derivations based on variational principles and is automatically satisfied in the assembling of stiffness matrix. The implementation of stiffness matrix comprises with two steps, the nodal assembly based on deformation gradient and global assembly on all nodes. Several numerical examples are presented to validate the method. KW - Peridynamik KW - Variational principle KW - weighted residual method KW - gradient elasticity KW - phase field fracture method KW - smoothed particle hydrodynamics KW - numerical methods KW - PDEs Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210412-44039 ER - TY - THES A1 - Bielik, Martin T1 - FORM-ACTIVITY-MOVEMENT INTERACTION MODEL N2 - This dissertation investigates the interactions between urban form, allocation of activities, and pedestrian movement in the context of urban planning. The ability to assess the long-term impact of urban planning decisions on what people do and how they get there is of central importance, with various disciplines addressing this topic. This study focuses on approaches proposed by urban morphologists, urban economists, and transportation planners, each aiming the attention at a different part of the form-activity-movement interaction. Even though there is no doubt about the advantages of these highly focused approaches, it remains unclear what is the cost of ignoring the effect of some interactions while considering others. The general aim of this dissertation is to empirically test the validity of the individual models and quantify the impact of this isolationist approach on their precision and bias. For this purpose, we propose a joined form-activity-movement interaction model and conduct an empirical study in Weimar, Germany. We estimate how the urban form and activities affect movement as well as how movement and urban form affect activities. By estimating these effects in isolation and simultaneously, we assess the bias of the individual models. On the one hand, the empirical study results confirm the significance of all interactions suggested by the individual models. On the other hand, we were able to show that when these interactions are estimated in isolation, the resulting predictions are biased. To conclude, we do not question the knowledge brought by transportation planners, urban morphologists, and urban economists. However, we argue that it might be of little use on its own. We see the relevance of this study as being twofold. On the one hand, we proposed a novel methodological framework for the simultaneous estimation of the form-activity-movement interactions. On the other hand, we provide empirical evidence about the strengths and limitations of current approaches. KW - Stadtplanung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210407-43970 ER - TY - THES A1 - Harirchian, Ehsan T1 - Improved Rapid Assessment of Earthquake Hazard Safety of Existing Buildings Using a Hierarchical Type-2 Fuzzy Logic Model N2 - Although it is impractical to avert subsequent natural disasters, advances in simulation science and seismological studies make it possible to lessen the catastrophic damage. There currently exists in many urban areas a large number of structures, which are prone to damage by earthquakes. These were constructed without the guidance of a national seismic code, either before it existed or before it was enforced. For instance, in Istanbul, Turkey, as a high seismic area, around 90% of buildings are substandard, which can be generalized into other earthquakeprone regions in Turkey. The reliability of this building stock resulting from earthquake-induced collapse is currently uncertain. Nonetheless, it is also not feasible to perform a detailed seismic vulnerability analysis on each building as a solution to the scenario, as it will be too complicated and expensive. This indicates the necessity of a reliable, rapid, and computationally easy method for seismic vulnerability assessment, commonly known as Rapid Visual Screening (RVS). In RVS methodology, an observational survey of buildings is performed, and according to the data collected during the visual inspection, a structural score is calculated without performing any structural calculations to determine the expected damage of a building and whether the building needs detailed assessment. Although this method might save time and resources due to the subjective/qualitative judgments of experts who performed the inspection, the evaluation process is dominated by vagueness and uncertainties, where the vagueness can be handled adequately through the fuzzy set theory but do not cover all sort of uncertainties due to its crisp membership functions. In this study, a novel method of rapid visual hazard safety assessment of buildings against earthquake is introduced in which an interval type-2 fuzzy logic system (IT2FLS) is used to cover uncertainties. In addition, the proposed method provides the possibility to evaluate the earthquake risk of the building by considering factors related to the building importance and exposure. A smartphone app prototype of the method has been introduced. For validation of the proposed method, two case studies have been selected, and the result of the analysis presents the robust efficiency of the proposed method. KW - Fuzzy-Logik KW - Erdbebensicherheit KW - Fuzzy logic KW - RC Buildings KW - Rapid Visual Assessment KW - Seismic Vulnerability KW - Uncertainty Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210326-43963 ER - TY - THES A1 - Arzmi, Azmah T1 - Reinterpreting Marzahn, Berlin & Petržalka, Bratislava: From Process of State Socialist Utopia to Utopia of State Capitalist Process N2 - Housing estates were fundamentally conceived upon state socialist utopia ideas to provide standard housing for citizens. While former state socialist housing estates have been extensively researched in the field of architecture, urban and sociology studies, there is still a gap in identifying how production processes affect morphological changes during the post-socialist era. This thesis compares the processes in the production of the largest housing estates of Marzahn in GDR and Petržalka in Czechoslovakia from 1970 to 1989 through contextual analysis of primary and secondary sources, which include visual maps, diagrams from professional architecture and planning journals, government documents and textbooks, as well as academic journals, books and newspaper articles. Then it discusses how these processes inadvertently created conducive conditions affecting their development in the market economy after 1989. It then interprets the results through application of Actor-Network Theory and Historical Institutionalism, while conceptualising them through David Harvey’s dialectical utopianism theory. Harvey (2000) delineates two types of utopia, one of spatial form and one of process. The former refers to materialised ideals in physical forms whereas the latter refers to the ongoing process of spatializing. The thesis aims to show how the production of Marzahn in GDR was more path dependent on policies established in 1950s and 1960s whereas Petržalka was a product of new Czechoslovakian policies in 1970s, changing aspects of the urban planning process, a manifestation of a more emphatic technocratic thinking on a wider scale. This ultimately influences the trajectories of development after 1989, showing more effects in Petržalka. KW - Kulturerbe KW - state socialist utopia KW - centralized planning KW - GDR KW - Czechoslovakia KW - mass housing estates Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210315-43927 ER - TY - THES A1 - Bianco, Marcelo José T1 - Coupling between Shell and Generalized Beam Theory (GBT) elements N2 - In the last decades, Finite Element Method has become the main method in statics and dynamics analysis in engineering practice. For current problems, this method provides a faster, more flexible solution than the analytic approach. Prognoses of complex engineer problems that used to be almost impossible to solve are now feasible. Although the finite element method is a robust tool, it leads to new questions about engineering solutions. Among these new problems, it is possible to divide into two major groups: the first group is regarding computer performance; the second one is related to understanding the digital solution. Simultaneously with the development of the finite element method for numerical solutions, a theory between beam theory and shell theory was developed: Generalized Beam Theory, GBT. This theory has not only a systematic and analytical clear presentation of complicated structural problems, but also a compact and elegant calculation approach that can improve computer performance. Regrettably, GBT was not internationally known since the most publications of this theory were written in German, especially in the first years. Only in recent years, GBT has gradually become a fertile research topic, with developments from linear to non-linear analysis. Another reason for the misuse of GBT is the isolated application of the theory. Although recently researches apply finite element method to solve the GBT's problems numerically, the coupling between finite elements of GBT and other theories (shell, solid, etc) is not the subject of previous research. Thus, the main goal of this dissertation is the coupling between GBT and shell/membrane elements. Consequently, one achieves the benefits of both sides: the versatility of shell elements with the high performance of GBT elements. Based on the assumptions of GBT, this dissertation presents how the separation of variables leads to two calculation's domains of a beam structure: a cross-section modal analysis and the longitudinal amplification axis. Therefore, there is the possibility of applying the finite element method not only in the cross-section analysis, but also the development for an exact GBT's finite element in the longitudinal direction. For the cross-section analysis, this dissertation presents the solution of the quadratic eigenvalue problem with an original separation between plate and membrane mechanism. Subsequently, one obtains a clearer representation of the deformation mode, as well as a reduced quadratic eigenvalue problem. Concerning the longitudinal direction, this dissertation develops the novel exact elements, based on hyperbolic and trigonometric shape functions. Although these functions do not have trivial expressions, they provide a recursive procedure that allows periodic derivatives to systematise the development of stiffness matrices. Also, these shape functions enable a single-element discretisation of the beam structure and ensure a smooth stress field. From these developments, this dissertation achieves the formulation of its primary objective: the connection of GBT and shell elements in a mixed model. Based on the displacement field, it is possible to define the coupling equations applied in the master-slave method. Therefore, one can model the structural connections and joints with finite shell elements and the structural beams and columns with GBT finite element. As a side effect, the coupling equations limit the displacement field of the shell elements under the assumptions of GBT, in particular in the neighbourhood of the coupling cross-section. Although these side effects are almost unnoticeable in linear analysis, they lead to cumulative errors in non-linear analysis. Therefore, this thesis finishes with the evaluation of the mixed GBT-shell models in non-linear analysis. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2021,2 KW - Biegetheorie KW - Finite Elemente Methode KW - Generalized Bean Theory KW - Finite Element KW - Thin-walled Structures KW - Cross-Section Warping KW - Cross-Section Distortion KW - Verallgemeinerte Technische Biegetheorie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210315-43914 ER - TY - THES A1 - Goswami, Somdatta T1 - Phase field modeling of fracture with isogeometric analysis and machine learning methods N2 - This thesis presents the advances and applications of phase field modeling in fracture analysis. In this approach, the sharp crack surface topology in a solid is approximated by a diffusive crack zone governed by a scalar auxiliary variable. The uniqueness of phase field modeling is that the crack paths are automatically determined as part of the solution and no interface tracking is required. The damage parameter varies continuously over the domain. But this flexibility comes with associated difficulties: (1) a very fine spatial discretization is required to represent sharp local gradients correctly; (2) fine discretization results in high computational cost; (3) computation of higher-order derivatives for improved convergence rates and (4) curse of dimensionality in conventional numerical integration techniques. As a consequence, the practical applicability of phase field models is severely limited. The research presented in this thesis addresses the difficulties of the conventional numerical integration techniques for phase field modeling in quasi-static brittle fracture analysis. The first method relies on polynomial splines over hierarchical T-meshes (PHT-splines) in the framework of isogeometric analysis (IGA). An adaptive h-refinement scheme is developed based on the variational energy formulation of phase field modeling. The fourth-order phase field model provides increased regularity in the exact solution of the phase field equation and improved convergence rates for numerical solutions on a coarser discretization, compared to the second-order model. However, second-order derivatives of the phase field are required in the fourth-order model. Hence, at least a minimum of C1 continuous basis functions are essential, which is achieved using hierarchical cubic B-splines in IGA. PHT-splines enable the refinement to remain local at singularities and high gradients, consequently reducing the computational cost greatly. Unfortunately, when modeling complex geometries, multiple parameter spaces (patches) are joined together to describe the physical domain and there is typically a loss of continuity at the patch boundaries. This decrease of smoothness is dictated by the geometry description, where C0 parameterizations are normally used to deal with kinks and corners in the domain. Hence, the application of the fourth-order model is severely restricted. To overcome the high computational cost for the second-order model, we develop a dual-mesh adaptive h-refinement approach. This approach uses a coarser discretization for the elastic field and a finer discretization for the phase field. Independent refinement strategies have been used for each field. The next contribution is based on physics informed deep neural networks. The network is trained based on the minimization of the variational energy of the system described by general non-linear partial differential equations while respecting any given law of physics, hence the name physics informed neural network (PINN). The developed approach needs only a set of points to define the geometry, contrary to the conventional mesh-based discretization techniques. The concept of `transfer learning' is integrated with the developed PINN approach to improve the computational efficiency of the network at each displacement step. This approach allows a numerically stable crack growth even with larger displacement steps. An adaptive h-refinement scheme based on the generation of more quadrature points in the damage zone is developed in this framework. For all the developed methods, displacement-controlled loading is considered. The accuracy and the efficiency of both methods are studied numerically showing that the developed methods are powerful and computationally efficient tools for accurately predicting fractures. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2021,1 KW - Phasenfeldmodell KW - Neuronales Netz KW - Sprödbruch KW - Isogeometric Analysis KW - Physics informed neural network KW - phase field KW - deep neural network KW - brittle fracture Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210304-43841 ER - TY - THES A1 - Reshetnikova, Tatiana T1 - Transformation of the Environment: Influence of “Urban Reagents.” German and Russian Case Studies N2 - An urban regeneration manifests itself through urban objects operating as change agents. The en-tailed diverse effects on the surroundings demonstrate experimental origin - an experiment as a preplanned but unpredictable method. An understanding of influences and features of urban ob-jects requires scrutiny due to a high potential of the elements to force an alteration and reactions. This dissertation explores the transformation of the milieu and mechanisms of this transformation. KW - urban reagent KW - urban transformation KW - urban virus KW - effects of architecture KW - experiment KW - Stadtentwicklung KW - urban regeneration KW - iconic architecture KW - influence of architecture Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210128-43517 N1 - Dissertation and Appendix (Folder + CD) to conferral of the academic degree Doctor of Engineering (Dr.-Ing.) at the Faculty of Architecture of the Bauhaus University Weimar, submitted by Reshetnikova Tatiana Sergeevna M.Design, Diploma in “Design” Date of birth 29\11\1984 Weimar, 2020 Supervisor Prof. Dr. phil. habil. Frank Eckardt Reviewers Prof. Dr. phil. habil. Frank Eckardt Prof. Vitaly Stadnikov (PhD) Date of the disputation: 22.01.2021 ER - TY - THES A1 - Bunte, Andreas T1 - Entwicklung einer ontologiebasierten Beschreibung zur Erhöhung des Automatisierungsgrades in der Produktion N2 - Die zu beobachtenden kürzeren Produktlebenszyklen und eine schnellere Marktdurchdringung von Produkttechnologien erfordern adaptive und leistungsfähige Produktionsanlagen. Die Adaptivität ermöglicht eine Anpassung der Produktionsanlage an neue Produkte, und die Leistungsfähigkeit der Anlage stellt sicher, dass ausreichend Produkte in kurzer Zeit und zu geringen Kosten hergestellt werden können. Durch eine Modularisierung der Produktionsanlage kann die Adaptivität erreicht werden. Jedoch erfordert heutzutage jede Adaption manuellen Aufwand, z.B. zur Anpassung von proprietären Signalen oder zur Anpassung übergeordneter Funktionen. Dadurch sinkt die Leistungsfähigkeit der Anlage. Das Ziel dieser Arbeit ist es, die Interoperabilität in Bezug auf die Informationsverwendung in modularen Produktionsanlagen zu gewährleisten. Dazu werden Informationen durch semantische Modelle beschrieben. Damit wird ein einheitlicher Informationszugriff ermöglicht, und übergeordnete Funktionen erhalten Zugriff auf alle Informationen der Produktionsmodule, unabhängig von dem Typ, dem Hersteller und dem Alter des Moduls. Dadurch entfällt der manuelle Aufwand bei Anpassungen des modularen Produktionssystems, wodurch die Leistungsfähigkeit der Anlage gesteigert und Stillstandszeiten reduziert werden. Nach dem Ermitteln der Anforderungen an einen Modellierungsformalismus wurden potentielle Formalismen mit den Anforderungen abgeglichen. OWL DL stellte sich als geeigneter Formalismus heraus und wurde für die Erstellung des semantischen Modells in dieser Arbeit verwendet. Es wurde exemplarisch ein semantisches Modell für die drei Anwendungsfälle Interaktion, Orchestrierung und Diagnose erstellt. Durch einen Vergleich der Modellierungselemente von unterschiedlichen Anwendungsfällen wurde die Allgemeingültigkeit des Modells bewertet. Dabei wurde gezeigt, dass die Erreichung eines allgemeinen Modells für technische Anwendungsfälle möglich ist und lediglich einige Hundert Begriffe benötigt. Zur Evaluierung der erstellten Modelle wurde ein wandlungsfähiges Produktionssystem der SmartFactoryOWL verwendet, an dem die Anwendungsfälle umgesetzt wurden. Dazu wurde eine Laufzeitumgebung erstellt, die die semantischen Modelle der einzelnen Module zu einem Gesamtmodell vereint, Daten aus der Anlage in das Modell überträgt und eine Schnittstelle für die Services bereitstellt. Die Services realisieren übergeordnete Funktionen und verwenden die Informationen des semantischen Modells. In allen drei Anwendungsfällen wurden die semantischen Modelle korrekt zusammengefügt und mit den darin enthaltenen Informationen konnte die Aufgabe des jeweiligen Anwendungsfalles ohne zusätzlichen manuellen Aufwand gelöst werden. KW - Ontologie KW - Metamodell KW - Interoperabilität KW - OWL KW - Industrie 4.0 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201215-43156 ER - TY - THES A1 - Markert, Michael T1 - Räumliche Navigation durch richtungsgebundene Stereofonie N2 - Die Verbreitung mobiler Smartphones und besonders deren allgegenwärtige Lokalisierungstechnologien verändern das Navigationsverhalten im Raum nachhaltig. Parallel zur schnell voranschreitenden Entwicklung alltäglicher Geräte, die mitgeführt werden, setzt der Übergang der bereits länger dauernden Entwicklung von Virtual-Reality-Technik in eine erweiterte und augmentierte Mixed Reality ein. In diesem Spannungsfeld untersucht die vorliegende Arbeit, inwieweit richtungsgebundene und binaural wiedergegebene Stereofonie die menschliche Bewegung im Raum beeinflussen kann und versucht zu erörtern, welche Potenziale in der Wiederentdeckung einer relativ lange bekannten Technik liegen. Der Autor hat im Rahmen dieser Arbeit eine binaurale mobile Applikation für richtungsgebundene Stereofonie entwickelt, mit der virtuelle bewegte oder statische Audio-Hotspots im Raum platziert werden können. So kann links, rechts oder 30 Meter vor einer Person ein virtueller oder tatsächlicher Klang im Raum verortet sein. Durch die in Echtzeit berechnete binaurale Wiedergabe der Klangquellen mit einem Stereo-Kopfhörer können diese räumlich verorteten Klänge mit zwei Ohren dreidimensional wahrgenommen werden, ähnlich dem räumlichen Sehen mit zwei Augen. Durch den Einsatz mehrerer lokalisierter Klangquellen als Soundscape entsteht eine augmentierte auditive Realität, die die physische Realität erweitert. Die Position und Navigation des Nutzers wird durch binaurale Lautstärkenmodulation (die Lautstärke nimmt bei abnehmender Distanz zur Quelle zu) und Stereopanning mit Laufzeitmodulation (die Richtung wird über ein Stereosignal auf beiden Ohren räumlich links-rechts-vorne verortet) interaktiv und kybernetisch beeinflusst. Die Nutzer navigieren — durch ihr Interesse an den hörbaren virtuellen Klangquellen geleitet — durch einen dynamisch erzeugten, dreidimensionalen akustischen Raum, der gleichzeitig ein virtueller und kybernetischer Raum ist, da die Repräsentation der Klänge an die Bewegung und Ausrichtung der Nutzer im Raum angepasst wird. Diese Arbeit untersucht, ob die Bewegung von Menschen durch (virtuelle) Klänge beeinflusst werden kann und wie groß oder messbar dieser Einfluss ist. Dabei können nicht alle künstlerischen, architektonischen und philosophischen Fragen im Rahmen der vorliegenden Schrift erörtert werden, obwohl sie dennoch als raumtheoretische Fragestellung von Interesse sind. Hauptgegenstand der vorliegenden Arbeit liegt in der Erforschung, ob richtungsgebundene Stereofonie einen relevanten Beitrag zur menschlichen Navigation, hauptsächlich zu Fuß, in urbanen Gebieten — vorwiegend im Außenraum — leisten kann. Der erste Teil gliedert sich in »Raum und Klang«, es werden raumtheoretische Überlegungen zur menschlichen Bewegung im Raum, Raumvorstellungen, räumliche Klänge und Klangwahrnehmung sowie die Entwicklung stereofoner Apparaturen und Aspekte der Augmented Audio Reality besprochen. Im zweiten Teil werden drei Demonstratoren als Anwendungsszenarien und drei Evaluierungen im Außenraum vorgestellt. Die Tests untersuchen, ob sich das Verfahren zur Navigation für Fußgänger eignet und inwieweit eine Einflussnahme auf das Bewegungsverhalten von Nutzern getroffen werden kann. Die Auswertungen der Tests zeigen, dass sich stereofone Klänge grundsätzlich als Navigationssystem eignen, da eine große Mehrzahl der Teilnehmer die akustisch markierten Ziele leicht gefunden hat. Ebenso zeigt sich ein klarer Einfluss auf die Bewegungsmuster, allerdings ist dieser abhängig von individuellen Interessen und Vorlieben. Abschließend werden die Ergebnisse der Untersuchungen im Kontext der vorgestellten Theorien diskutiert und die Potenziale stereofoner Anwendungen in einem Ausblick behandelt. Bei der Gestaltung, Erzeugung und Anwendung mobiler Systeme sind unterschiedliche mentale und räumliche Modelle und Vorstellungen der Entwickler und Anwender zu beachten. Da eine umfassende transdisziplinäre Betrachtung klare Begrifflichkeiten erfordert, werden Argumente für ein raumtheoretisches Vokabular diskutiert. Diese sind für einen gestalterischen Einsatz von richtungsgebundener Stereofonie — besonders im Kontext mobiler Navigation durch akustisch augmentierte Räume — äußerst relevant. KW - Raum KW - Stereophonie KW - Raumklang KW - Erweiterte Realität KW - Kybernetik KW - Stereofonie KW - Augmented Audio Reality KW - Mensch-Maschine-Interaktion KW - Navigation KW - Localised Sound KW - Mensch-Maschine-Kommunikation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201214-43038 ER - TY - THES A1 - Winkel, Benjamin T1 - A three-dimensional model of skeletal muscle for physiological, pathological and experimental mechanical simulations T1 - Ein dreidimensionales Skelettmuskel-Modell für physiologische, pathologische und experimentelle mechanische Simulationen N2 - In recent decades, a multitude of concepts and models were developed to understand, assess and predict muscular mechanics in the context of physiological and pathological events. Most of these models are highly specialized and designed to selectively address fields in, e.g., medicine, sports science, forensics, product design or CGI; their data are often not transferable to other ranges of application. A single universal model, which covers the details of biochemical and neural processes, as well as the development of internal and external force and motion patterns and appearance could not be practical with regard to the diversity of the questions to be investigated and the task to find answers efficiently. With reasonable limitations though, a generalized approach is feasible. The objective of the work at hand was to develop a model for muscle simulation which covers the phenomenological aspects, and thus is universally applicable in domains where up until now specialized models were utilized. This includes investigations on active and passive motion, structural interaction of muscles within the body and with external elements, for example in crash scenarios, but also research topics like the verification of in vivo experiments and parameter identification. For this purpose, elements for the simulation of incompressible deformations were studied, adapted and implemented into the finite element code SLang. Various anisotropic, visco-elastic muscle models were developed or enhanced. The applicability was demonstrated on the base of several examples, and a general base for the implementation of further material models was developed and elaborated. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2020,3 KW - Biomechanik KW - Nichtlineare Finite-Elemente-Methode KW - Muskel KW - Brustkorb KW - Muscle model KW - FEM KW - Biomechanics KW - Incompressibility KW - Thorax Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201211-43002 ER - TY - THES A1 - Kunert, André T1 - 3D Interaction Techniques in Multi-User Virtual Reality : towards scalable templates and implementation patterns for cooperative interfaces N2 - Multi-user projection systems provide a coherent 3D interaction space for multiple co-located users that facilitates mutual awareness, full-body interaction, and the coordination of activities. The users perceive the shared scene from their respective viewpoints and can directly interact with the 3D content. This thesis reports on novel interaction patterns for collaborative 3D interaction for local and distributed user groups based on such multi-user projection environments. A particular focus of our developments lies in the provision of multiple independent interaction territories in our workspaces and their tight integration into collaborative workflows. The motivation for such multi-focus workspaces is grounded in research on social cooperation patterns, specifically in the requirement for supporting phases of loose and tight collaboration and the emergence of dedicated orking territories for private usage and public exchange. We realized independent interaction territories in the form of handheld virtual viewing windows and multiple co-located hardware displays in a joint workspace. They provide independent views of a shared virtual environment and serve as access points for the exploration and manipulation of the 3D content. Their tight integration into our workspace supports fluent transitions between individual work and joint user engagement. The different affordances of various displays in an exemplary workspace consisting of a large 3D wall, a 3D tabletop, and handheld virtual viewing windows, promote different usage scenarios, for instance for views from an egocentric perspective, miniature scene representations, close-up views, or storage and transfer areas. This work shows that this versatile workspace can make the cooperation of multiple people in joint tasks more effective, e.g. by parallelizing activities, distributing subtasks, and providing mutual support. In order to create, manage, and share virtual viewing windows, this thesis presents the interaction technique of Photoportals, a tangible interface based on the metaphor of digital photography. They serve as configurable viewing territories and enable the individual examination of scene details as well as the immediate sharing of the prepared views. Photoportals are specifically designed to complement other interface facets and provide extended functionality for scene navigation, object manipulation, and for the creation of temporal recordings of activities in the virtual scene. A further objective of this work is the realization of a coherent interaction space for direct 3D input across the independent interaction territories in multi-display setups. This requires the simultaneous consideration of user input in several potential interaction windows as well as configurable disambiguation schemes for the implicit selection of distinct interaction contexts. We generalized the required implementation structures into a high-level software pattern and demonstrated its versatility by means of various multi-context 3D interaction tools. Additionally, this work tackles specific problems related to group navigation in multiuser projection systems. Joint navigation of a collocated group of users can lead to unintentional collisions when passing narrow scene sections. In this context, we suggest various solutions that prevent individual collisions during group navigation and discuss their effect on the perceived integrity of the travel group and the 3D scene. For collaboration scenarios involving distributed user groups, we furthermore explored different configurations for joint and individual travel. Last but not least, this thesis provides detailed information and implementation templates for the realization of the proposed interaction techniques and collaborative workspaces in scenegraph-based VR systems. These contributions to the abstraction of specific interaction patterns, such as group navigation and multi-window interaction, facilitate their reuse in other virtual reality systems and their adaptation to further collaborative scenarios. N2 - Stereoskopische Mehrbenutzer-Projektionssysteme ermöglichen die perspektivisch korrekte Darstellung einer 3D-Szene für mehrere Nutzer. Dadurch erschaffen sie einen kohärenten Interaktionsraum, welcher sowohl die direkte Interaktion mit den 3D-Inhalten als auch die gegenseitige Wahrnehmung von Aktivitäten einzelner Personen und deren Koordination unterstützt. Diese Arbeit berichtet über neuartige Interaktionstechniken für kollaborative 3D Arbeitsplätze für lokale und verteilte Benutzergruppen auf der Basis solcher Mehrbenutzer-Projektionsdisplays. Ein besonderer Schwerpunkt unserer Entwicklungen liegt in der Bereitstellung mehrerer unabhängiger Interaktionsterritorien in einem gemeinsamen Arbeitsraum und deren enger Integration in kollaborative Arbeitsprozesse. Wissenschaftliche Untersuchungen über soziale Kooperationsmuster haben gezeigt, dass kollaborative Arbeitsprozesse sowohl auf Phasen enger Zusammenarbeit als auch auf individuellen Aktivitäten beruhen. Damit einhergehend findet üblicherweise eine räumliche Aufteilung in gemeinschaftlich oder privat genutzte Arbeitsbereiche statt. In unseren kollaborativen Arbeitsumgebungen haben wir solche unabhängigen, flexibel nutzbaren Interaktionsterritorien zum einen durch mobile virtuelle Interaktionsfenster und zum anderen durch mehrere festinstallierte Mehrbenutzerdisplays (3D-Projektionswand und 3D-Projektionstisch) realisiert. Jedes dieser Interaktionsfenster ermöglicht unabhängige Ansichten auf die virtuelle Szene, welche für die Exploration und Manipulation der 3D-Inhalte genutzt werden können. Durch ihre Einbindung in eine zusammenhängende Arbeitsumgebung unterstützen sie fließende Übergänge zwischen individueller und gemeinschaftlicher Arbeit. Die unterschiedlichen Charakteristika der integrierten Displays begünstigen unterschiedliche Anwendungsszenarien. Szenenansichten in Originalgröße können z.B. auf der großen 3D-Projektionswand ideal dargestellt werden, während der 3D Tisch sich eher für Miniaturansichten auf die Szene eignet. Die portablen virtuellen Interaktionsfenster können auf vielfältige Weise genutzt werden, z.B. für Detailansichten, als Bildergalerie und zum Austausch von Perspektiven zwischen den beiden festinstallierten Displays. Im Rahmen diese Arbeit wird gezeigt, dass diese vielseitigen Interaktionsterritorien kollaborative Arbeitsprozesse durch Parallelisierung von Aktivitäten, Aufteilung von Teilaufgaben und Möglichkeiten zur gegenseitigen Unterstützung effektiver gestalten können. Als neuartige Benutzungsschnittstelle für virtuelle Interaktionsfenster stellen wir die Interaktionstechnik der „Fotoportale“ vor. Diese beruht auf den Bedienungsmustern digitaler Fotoapparate und ermöglicht die unkomplizierte Erstellung, Bearbeitung und Weitergabe von separaten Szenenansichten. Fotoportale sind speziell dazu entworfen, alternative Schnittstellen zu anderen Interaktionsaspekten anzubieten. In diesem Kontext bieten sie erweiterte Funktionalitäten zur Szenennavigation, Objektmanipulation und zur Aufzeichnung zeitlicher Abläufe in der virtuellen Szene an. Ein weiteres Ziel dieser Arbeit ist die Realisierung eines kohärenten Interaktionsraums für direkte 3D-Interaktion, der sich über mehrere separate Interaktionsfenster hinweg erstreckt. Dies erfordert die gleichzeitige Berücksichtigung von Benutzereingaben in mehreren Interaktionsfenstern sowie konfigurierbare Auswahlschemata zur impliziten Disambiguierung dieser Interaktionskontexte. Wir haben die dafür erforderlichen Mechanismen verallgemeinert und in ein Software-Pattern überführt. Die Vielseitigkeit dieser Abstraktion wird anhand unterschiedlicher 3D-Interaktionswerkzeuge demonstriert. Darüber hinaus befasst sich diese Arbeit mit spezifischen Problemen im Zusammenhang mit der Gruppennavigation in Mehrbenutzer-Projektionssystemen. Die gemeinschaftliche Navigation der vor der 3D-Projektionswand verteilten Nutzer kann bei der Passage beengter Szenenabschnitte zu unbeabsichtigten Kollisionen führen. In diesem Kontext schlagen wir verschiedene Lösungen vor, die individuelle Kollisionen einzelner Nutzer mit Hindernissen während des Navigationsprozesses verhindern. Die Auswirkungen dieser Lösungsansätze auf die wahrgenommene Integrität der Nutzergruppe beziehungsweise die der 3D Welt werden hierbei ausführlich diskutiert. Für Kollaborationsszenarien mit sich an verschiedenen Orten befindenden Nutzergruppen stellen wir außerdem eine Reihe von Optionen für gemeinsame und unabhängige Navigation vor, die kontinuierlich Informationen zur aktuellen Position der jeweils anderen Gruppe zur Verfügung stellen. Nicht zuletzt liefert diese Arbeit detaillierte Informationen und Implementierungsmuster für die Realisierung der vorgeschlagenen Interaktionstechniken und der kollaborativen Arbeitsräume in Szenengraph-basierten VR Systemen. Diese Beiträge zur Abstraktion spezifischer Interaktionsmuster, wie z.B. Gruppennavigation und Mehrfensterinteraktion, können als Vorlage für deren Reimplementierung in anderen VR-Systemen beziehungsweise für ihre Anpassung auf weitere kollaborative Szenarien dienen. KW - Virtuelle Realität KW - Mensch-Maschine-Kommunikation KW - 3D Interaction Techniques KW - Human-Computer Interaction KW - Multi-User Virtual Reality Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201204-42962 ER - TY - THES A1 - Müller, Jan Philip T1 - Audiovision und Synchronisation. Sehen, Hören und Gleichzeitigkeit in Anordnungen vom Observatorium über psychologische Experimente bis zum Tonfilm im 19. und 20. Jahrhundert N2 - In dieser Untersuchung wird eine Geschichte von Problemen der Gleichzeitigkeit zwischen Sehen und Hören, beziehungsweise der Synchronität von Bild und Ton, bis zur Entstehung des Tonfilms rekonstruiert. Dabei werden Linien gezogen zwischen diskursiven Konfigurationen und medialen Anordnungen, in denen das Verhältnis von Sehen und Hören oder Bild und Ton als zeitliches erscheint – in denen Sehen und Hören, Bild und Ton zwischen Mannigfaltigkeit und Einheit verschmelzen, auseinanderfallen, interagieren, redundant oder spezifisch werden, einander ergänzen, dominieren, verfehlen verdrängen, aufspalten… Tonfilm ist in der Kinogeschichte eben nicht nur eine Ergänzung. Vielmehr ähnelt er dem Auftritt eines Gespensts, das das Wissen und die Techniken der Trennung der Sinne schon länger, vielleicht schon immer begleitet hatte. Das Auftreten des Tonfilms ist auch überhaupt früher Anlass eines weitreichenden Diskurses darüber, was Audiovision eigentlich sein könnte und sollte. Noch allgemeiner könnte auch davon gesprochen werden, dass Tonfilm eins der ersten großen Projekte der Konvergenz technischer Medien ist, die heute – besonders angesichts des Computers – als entscheidender Aspekt von Mediengeschichte erscheint. Die Linien der Probleme von Gleichzeitigkeit/Ungleichzeitigkeit an den Schnittstellen von Wissen, Technik und Ästhetik werden insbesondere durch drei Felder hindurch nachgezeichnet: 1) Die Geschichte von Intermodalität in Bezug auf die Frage nach Gleichzeitigkeit und Ungleichzeitigkeit als Problem und Gegenstand von Wissenschaft seit dem 19. Jahrhundert, vornehmlich in zwei Gebieten: Als Fehlerquelle im astronomischen Observatorium bei der Messung, Feststellung und Vereinheitlichung von Raum und Zeit, die auf individuelle Abweichungen Intermodaler Wahrnehmung verweist und als Problem der „persönlichen Gleichung“ weit über die Astronomie hinaus Karriere macht. Als heiße Zone wahrnehmungspsychologischer Experimente und ihrer Apparate seit der Mitte des 19. Jahrhunderts, die mit dem Konzept der „Komplikation“ Fragen nach einer Synthese der Sinneswahrnehmungen und damit letztlich nach der Selbstgegenwart des Menschen stellt. 2) Eine Technikgeschichte des Problems auditive und visuelle Zeitmedien – wie Phonograph und Film – zu koppeln, zu synchronisieren. Darin eskalieren zwei zeitkritische Relationen: Einerseits zwischen diskreter, intermittierender Bewegung des Films und stetiger, kontinuierlicher Bewegung des Phonographen, andererseits in Bezug darauf, an welcher Stelle – wo und wann – audiovisuelle Gegenwart des Kinos ensteht; oder auch verfehlt wird. 3) Eine Geschichte von Filmtheorie und -ästhetik, in der sich mit der Durchsetzung des Tonfilms um 1930 die Frage stellt, was dieses neue Medium sei und was damit zu tun. Diese Verhandlungen spannen sich zwischen dem formulierten Ziel einer spezifischen Illusion oder Präsenz von Tonfilm durch Synchronität auf der einen Seite und der sich aus dem Verdacht des Betrugs durch Synchronität ergebenden Forderung nach „Asynchronismus“ als kritischer Methode auf der anderen Seite auf. Ausgehend von der These, dass im 19. Jahrhundert die Sinne aufgeteilt werden, dann wird in diesen Anordnungen an irgendeiner Stelle Heterogenes gleichzeitig passieren. An welcher Stelle? Und was bedeuten diese (Un-)Gleichzeitigkeiten? Was dabei - sehr allgemein gesprochen - auf dem Spiel steht, sind Möglichkeiten einer audiovisuell geteilten – getrennten oder gemeinsamen - Welt und Gegenwart. KW - Tonfilm KW - Asynchronität KW - Ästhetik KW - Medien KW - Geschichte KW - Audiovision KW - Synchronisation KW - Synchronisierung KW - Sinne KW - Technik Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201123-42906 ER - TY - THES A1 - Rost, Grit T1 - Entwicklung eines Toolboxmodells als Planungswerkzeug für ein transdisziplinäres Wasserressourcenmanagement am Beispiel der Stadt Darkhan, Mongolei N2 - Im Rahmen der Dissertation wurde ein Toolboxmodell für transdisziplinäres Wasserressourcenmanagement entwickelt. Das Modell liefert den methodischen Rahmen Wasserressourcen nachhaltig und transdisziplinär zu bewirtschaften. Der Begriff der Nachhaltigkeit und eine Konkretisierung der nachhaltigen Bewirtschaftung globaler Wasserressourcen scheinen unüberschaubar und suggerieren die Forderung nach einer neuen Weltformel. Die globale Bedeutung der Wasserressourcen, die für Regionen spezifischen Besonderheiten des natürlichen Wasserhaushalts und der anthropogenen Nutzung, die Zeitskala und die Kontextualisierung in alle betroffenen und benachbarten Disziplinen deuten auf die Komplexität der Thematik hin. Es wird eine Systematisierung des Planungsprozesses von Wasserressourcen notwendig, anhand derer eine holistische Herangehensweise mit einer Strategieentwicklung für Regionen spezifischer Schwerpunktprobleme erfolgt. Ziel der Arbeit ist die Erarbeitung einer Strategie zur Systematisierung nach diesen Forderungen und die Bereitstellung eines Toolboxmodelles als Planungswerkzeug für das transdisziplinäre Wasserressourcenmanagement. Das Toolboxmodell stellt den konzeptionellen Rahmen für die Bewirtschaftung von Wasserressourcen mit der Anwendung transdisziplinärer Forschungsmethoden bereit. Wesentliche Herausforderung bei der Anwendung der transdisziplinären Methode sind die Implementierung verschiedener Skalenbereiche, der Umgang mit der Komplexität von Daten, das Bewahren von Transparenz und Objektivität sowie die Ermöglichung eines auf andere Regionen übertragbaren Planungsprozesses. Die theoretischen Grundlagen naturwissenschaftlicher Forschung zur Nachhaltigkeit haben ihren Ursprung in den biologischen und geographischen Disziplinen. Das Ineinandergreifen naturräumlicher Zusammenhänge und der Einfluss anthropogener Nutzung und technischer Innovationen auf den Naturhaushalt sind Kern der Kausalität übergreifenden Denkens und Verstehens. Mit dem Ansatz des integrierten Wasserressourcenmanagements (IWRM) erfolgt die Berücksichtigung wirtschaftlicher und sozioökonomischer Ziele in den Planungsprozess für ökologisch nachhaltige Wasserwirtschaft. Das Instrument der Wasserrahmenrichtlinie (EU-WRRL) ist auf eine Gewässerökologie ausgerichtete Richtlinie, welche die Integration verschiedener Interessenvertreter in den Planungsprozess vorsieht. Das Konzept der neuartigen Sanitärsysteme basiert auf Stoffflüssen zwischen konkurrierenden Handlungsbereichen, wie Abfall-, Ressourcen- und Landwirtschaft. Den integrierten Ansätzen fehlt eine übergeordnete gemeinsame Zielstrategie – eine sogenannte Phase Null. Diese Phase Null – das Lernen aller 7 Zusammenfassung 157 relevanten, konkurrierenden und harmonisierenden Handlungsfelder eines Planungshorizontes wird durch eine transdisziplinäre Perspektive ermöglicht. Während bei der integralen Perspektive eine disziplinorientierte Kooperation im Vordergrund steht, verlangt die transdisziplinäre Perspektive nach einer problemorientierten Kooperation zwischen den Interessenvertretern (Werlen 2015). Die bestehenden Konzepte und Richtlinien für das nachhaltige Management von Wasserressourcen sind etabliert und evaluiert. Der Literatur zur Folge ist eine Weiterentwicklung nach der Perspektive der Transdisziplinarität erforderlich. Das Toolboxmodell für integrales Wasserressourcenmanagement entspricht einem Planungstool bestehend aus Werkzeugen für die Anwendung wissenschaftlicher Methoden. Die Zusammenstellung der Methoden/Werkzeuge erfüllt im Rahmen die Methode transdisziplinärer Forschung. Das Werkzeug zum Aufstellen der relevanten Handlungsfelder umfasst die Charakterisierung eines Untersuchungsgebietes und Planungsrahmens, die kausale Verknüpfung des Bewirtschaftungskonzeptes und konkurrierender sowie sich unterstützender Stakeholder. Mit dem Werkzeug der Kontextualisierung und Indikatorenaufstellung wird eine Methode der stufenweisen und von einer Skala unabhängigen Bewertung des Umweltzustandes für die Zielpriorisierung vorgenommen. Damit wird das Toolboxmodell dem Problem der Komplexität und Datenverfügbarkeit gerecht. Anhand der eingesetzten ABC Methode, werden die Bewertungsgrößen differenziert strukturiert auf verschiedene Skalen und Datenressourcen (A=Ersterkennung,B=Zeigerwerte, C=Modell/Index). Die ABC-Methode ermöglicht die Planung bereits mit unsicherer und lückenhafter Datengrundlage, ist jederzeit erweiterbar und bietet somit eine operative Wissensgenerierung während des Gestaltungsprozesses. Für das Werkzeug zur Bewertung und Priorisierung wird der Algorithmus der Composite Programmierung angewandt. Diese Methode der Mehrfachzielplanung erfüllt den Anspruch der permanenten Erweiterbarkeit und der transparenten und objektiven Entscheidungsfindung. Die Komplexität des transdisziplinären Wasserressourcenmanagements kann durch die Methode der Composite Programmierung systematisiert werden. Das wesentliche Ergebnis der Arbeit stellt die erfolgreiche Erarbeitung und Anwendung des Tool-boxmodells für das transdisziplinäre Wasserressourcenmanagement im Untersuchungsgebiet Stadt Darkhan in der Mongolei dar. Auf Grund seiner besonderen hydrologischen und strukturellen Situa-tion wird die Relevanz eines nachhaltigen Bewirtschaftungskonzeptes deutlich. Im Rahmen des Querschnittsmoduls des MoMo-Projektes wurde eine für das Toolboxmodell geeignete Datengrundlage erarbeitet. Planungsrelevante Handlungsfelder wurden im Rahmen eines Workshops mit verschiedenen Interessenvertretern erarbeitet. Im Ergebnis dessen wurde die Systematik eines Zielbaumes mit Hauptzielen und untergeordneten Teilzielen als Grundlage der Priorisierung nach den holistischen Anspruch der transdisziplinären Forschung aufgestellt. Für die Messbarkeit, in-wieweit Teilziele erreicht sind oder Handlungsbedarf besteht, wurden Indikatoren erarbeitet. Die Indikatoren-Aufstellung erfolgte exemplarisch für das Handlungsfeld Siedlungswasserwirtschaft in allen Skalen des ABC-Systems. Die im BMBF-MoMo Projekt generierte umfassende Datengrundlage ermöglichte die Anwendung und Evaluierung des Toolboxmodells mit unterschiedlichem quantitativem und qualitativem Dateninput. Verschiedene Kombination von A (Ersterkennung), B (Zeigerwerte) und C (Modell/Index) als Grundlage der Priorisierung mit der Compostite Programmierung ermöglichten die Durchführung und Bewertung des transdisziplinären Planungstools. Die er-mittelten Rangfolgen von Teilzielen mit unterschiedlichen Bewertungsvarianten ergaben ähnliche Tendenzen. Das ist ein Hinweis dafür, dass für die zukünftige Anwendung des Toolboxmodells die operative Wissensgenerierung, d.h. das schrittweise Hinzufügen neu ermittelter, gesicherterer Daten, funktioniert. Eine schwierige Datenverfügbarkeit oder eine noch im Prozess befindliche wissenschaftliche Analyse sollen keine Hindernisse für eine schrittweise und erweiterbare Zielpriorisierung und Maßnahmenplanung sein. Trotz der Komplexität des transdisziplinären Ansatzes wird durch die Anwendung des Toolboxmodells eine effiziente und zielorientierte Handlungspriorisierung ermöglicht. Die Effizienz wird erreicht durch ressourcenschonende und flexible, Ziel fokussierte Datenermittlung. Zeit und Kosten im Planungsprozess können eingespart werden. Die erzielte Priorisierung von letztlich Handlungsempfehlungen erfolgt individuell auf die Eigenart des Untersuchungsgebietes angepasst, was hinsichtlich seiner Wirkung als erfolgsversprechend gilt. T3 - Schriften der Bauhaus-Universität Weimar - 39 KW - Wasserreserve KW - Transdisziplinarität KW - Flussgebiet KW - Mongolei KW - Wasserressourcenmanagement KW - Mangement Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201113-42874 SN - 978-3-941216-94-5 PB - Rhombus CY - Berlin ER - TY - THES A1 - Rabizadeh, Ehsan T1 - Goal-oriented A Posteriori Error Estimation and Adaptive Mesh Refinement in 2D/3D Thermoelasticity Problems T1 - Zielorientierte a posteriori Fehlerabschätzung und adaptive Netzverfeinerung bei 2D- und 3Dthermoelastischen Problemen N2 - In recent years, substantial attention has been devoted to thermoelastic multifield problems and their numerical analysis. Thermoelasticity is one of the important categories of multifield problems which deals with the effect of mechanical and thermal disturbances on an elastic body. In other words, thermoelasticity encompasses the phenomena that describe the elastic and thermal behavior of solids and their interactions under thermo-mechanical loadings. Since providing an analytical solution for general coupled thermoelasticity problems is mathematically complicated, the development of alternative numerical solution techniques seems essential. Due to the nature of numerical analysis methods, presence of error in results is inevitable, therefore in any numerical simulation, the main concern is the accuracy of the approximation. There are different error estimation (EE) methods to assess the overall quality of numerical approximation. In many real-life numerical simulations, not only the overall error, but also the local error or error in a particular quantity of interest is of main interest. The error estimation techniques which are developed to evaluate the error in the quantity of interest are known as “goal-oriented” error estimation (GOEE) methods. This project, for the first time, investigates the classical a posteriori error estimation and goal-oriented a posteriori error estimation in 2D/3D thermoelasticity problems. Generally, the a posteriori error estimation techniques can be categorized into two major branches of recovery-based and residual-based error estimators. In this research, application of both recovery- and residual-based error estimators in thermoelasticity are studied. Moreover, in order to reduce the error in the quantity of interest efficiently and optimally in 2D and 3D thermoelastic problems, goal-oriented adaptive mesh refinement is performed. As the first application category, the error estimation in classical Thermoelasticity (CTE) is investigated. In the first step, a rh-adaptive thermo-mechanical formulation based on goal-oriented error estimation is proposed.The developed goal-oriented error estimation relies on different stress recovery techniques, i.e., the superconvergent patch recovery (SPR), L2-projection patch recovery (L2-PR), and weighted superconvergent patch recovery (WSPR). Moreover, a new adaptive refinement strategy (ARS) is presented that minimizes the error in a quantity of interest and refines the discretization such that the error is equally distributed in the refined mesh. The method is validated by numerous numerical examples where an analytical solution or reference solution is available. After investigating error estimation in classical thermoelasticity and evaluating the quality of presented error estimators, we extended the application of the developed goal-oriented error estimation and the associated adaptive refinement technique to the classical fully coupled dynamic thermoelasticity. In this part, we present an adaptive method for coupled dynamic thermoelasticity problems based on goal-oriented error estimation. We use dimensionless variables in the finite element formulation and for the time integration we employ the acceleration-based Newmark-_ method. In this part, the SPR, L2-PR, and WSPR recovery methods are exploited to estimate the error in the quantity of interest (QoI). By using adaptive refinement in space, the error in the quantity of interest is minimized. Therefore, the discretization is refined such that the error is equally distributed in the refined mesh. We demonstrate the efficiency of this method by numerous numerical examples. After studying the recovery-based error estimators, we investigated the residual-based error estimation in thermoelasticity. In the last part of this research, we present a 3D adaptive method for thermoelastic problems based on goal-oriented error estimation where the error is measured with respect to a pointwise quantity of interest. We developed a method for a posteriori error estimation and mesh adaptation based on dual weighted residual (DWR) method relying on the duality principles and consisting of an adjoint problem solution. Here, we consider the application of the derived estimator and mesh refinement to two-/three-dimensional (2D/3D) thermo-mechanical multifield problems. In this study, the goal is considered to be given by singular pointwise functions, such as the point value or point value derivative at a specific point of interest (PoI). An adaptive algorithm has been adopted to refine the mesh to minimize the goal in the quantity of interest. The mesh adaptivity procedure based on the DWR method is performed by adaptive local h-refinement/coarsening with allowed hanging nodes. According to the proposed DWR method, the error contribution of each element is evaluated. In the refinement process, the contribution of each element to the goal error is considered as the mesh refinement criterion. In this study, we substantiate the accuracy and performance of this method by several numerical examples with available analytical solutions. Here, 2D and 3D problems under thermo-mechanical loadings are considered as benchmark problems. To show how accurately the derived estimator captures the exact error in the evaluation of the pointwise quantity of interest, in all examples, considering the analytical solutions, the goal error effectivity index as a standard measure of the quality of an estimator is calculated. Moreover, in order to demonstrate the efficiency of the proposed method and show the optimal behavior of the employed refinement method, the results of different conventional error estimators and refinement techniques (e.g., global uniform refinement, Kelly, and weighted Kelly techniques) are used for comparison. N2 - Einleitung und Motivation: 1- Im Laufe der letzten Jahrzehnte wurde den Mehrfeldproblemen und ihrer numerischen Analyse große Aufmerksamkeit gewidmet. Bei Mehrfeldproblemen wird die Wechselwirkung zwischen verschiedenen Feldern wie elastischen, elektrischen, magnetischen, chemischen oder thermischen Feldern untersucht. Eine wichtige Kategorie von Mehrfeldproblemen ist die Thermoelastizität. In der Thermoelastizität werden neben dem mechanischen Feld (Verschiebungen) auch das thermische Feld (Temperatur) und deren Auswirkungen aufeinander untersucht. 2- In fortgeschrittenen und sensible Anwendungen mit Temperaturänderung (z. B. LNG-, CNG- oder LPG-Speichertanks bei Sonnentemperatur im Sommer) ist die Elastizitätstheorie, die nur Verschiebungen berücksichtigt, nicht ausreichend. In diesen Fällen ist die Verwendung einer thermoelastischen Formulierung unumgänglich, um zuverlässige Ergebnisse zu erzielen. 3- Da eine analytische Lösung für thermoelastische Probleme sehr selten bestimmbar ist, wird sie durch numerische Methoden ersetzt. Allerdings sind die numerischen Ergebnisse nicht exakt und approximieren nur die exakte Lösung. Daher sind Fehler in den numerischen Ergebnissen unvermeidlich. 4- In jeder numerischen Simulation ist die Genauigkeit der Approximation das Hauptanliegen. Daher wurden verschiedene Fehlerschätzungstechniken entwickelt, um den Fehler der numerischen Lösung zu schätzen. Die herkömmlichen Fehlerschätzungsmethoden geben nur einen allgemeinen Überblick über die Gesamtgenauigkeit einer Näherungslösung. Bei vielen realen Problemen ist jedoch anstelle der Gesamtgenauigkeit die örtliche Genauigkeit (z. B. die Genauigkeit an einem bestimmten Punkt) von großem Interesse 5- Herkömmliche Fehlerschätzer berechnen Fehler in gewissen Normen. In der Ingenieurpraxis interessieren allerdings Fehler in anderen Zielgrößen, beispielsweise in der Last-Verformungs-Kurve oder in gewissen Spannungs-komponenten und speziellen Positionen. Dafür wurden sog. zielorientierte Fehlerschätzer entwickelt. 6- Die meisten numerischen Methoden unterteilen das Gebiet in kleine Teile (Element/Zelle), um das Problem zu lösen. Die Verwendung sehr feiner Elemente erhöht die Simulationsgenauigkeit, erhöht aber auch die Rechenzeit drastisch. Dieses Problem wird durch adaptive Methoden (AM) gelöst. AM können die Rechenzeit deutlich verringern. Bei adaptiven Methoden spielt die Fehlerschätzung eine Schlüsselrolle. Die Verfeinerung der Diskretisierung wird von einer Fehlerschätzung der Lösung kontrolliert und gesteuert (Elemente mit einem höheren geschätzten Fehler werden zur Verfeinerung/Aufteilung ausgewählt). Problemstellung und Zielsetzung der Arbeit 7- Die thermoelastischen Probleme können in zwei Hauptgruppen eingeteilt werden: Klassische Thermoelastizität (KTE) und klassische gekoppelte Thermoelastizität (KKTE). In jeder Gruppe werden verschiedene thermoelastische Probleme mit verschiedenen Geometrien, und Rand-/Anfangsbedingungen untersucht. In dieser Untersuchung werden die KTE- und KKTE-Probleme numerisch gelöst und alle numerischen Lösungen durch Fehlerschätzung bewertet. 8- In dieser Arbeit werden die Gesamtgenauigkeit der numerischen Lösung durch herkömmliche globale Fehlerschätzverfahren (auch als recovery-basierte Methoden bekannt) und die Genauigkeit der Lösung in bestimmten Punkten durch neue lokale Methoden (z. B. Dual-gewichtete Residuumsmethode oder DWR-Methode) bewertet. 9- Bei den dynamischen thermoelastischen Problemen ändern sich die Problembedin-gungen und anschließend die Lösung mit der Zeit. Daher werden die Fehler in jedem Zeitschritt geschätzt, um die Genauigkeit über die Zeit zu erhalten. 10- In dieser Dissertation wurde eine neue adaptive Gitter-Verfeinerung (AGV)-Technik entwickelt und für thermoelastische Probleme implementiert. Stand der Wissenschaft 11- Da die Thermoelastizität im Vergleich zu anderen mechanischen Bereichen wie der Elastizität nicht so umfangreich untersucht ist, wurden nur sehr begrenzte Untersuchungen durchgeführt, um die numerischen Fehler abzuschätzen und zu kontrollieren. Alle diese Untersuchungen konzentrierten sich auf die konventionellen Techniken, die nur den Gesamtfehler abschätzen können. Um die lokalen Fehler (wie punktweise Fehler oder Fehler an einem bestimmten Punkt) abzuschätzen, ist die Verwendung der zielorientierten Fehlerschätzungstechniken unvermeidlich. Die Implementierung der recovery-basierten zielorientierten Fehlerschätzung in der Thermoelastizität wird vor diesem Projekt nicht untersucht. 12- Viele numerische Analysen der dynamischen thermoelastischen Probleme basieren auf der Laplace-Transformationsmethode. Bei dieser Methode ist es praktisch nicht möglich, den Fehler in jedem Zeitschritt abzuschätzen. Daher wurden bisher die herkömmlichen globalen oder lokalen zielorientierten Fehlerschätzungsverfahren nicht in der dynamischen Thermoelastizität implementiert. 13- Eine der neuesten fortgeschrittenen zielorientierten Fehlerschätzungsmethoden ist die Dual-gewichtete Residuumsmethode (DWR-Methode). Die DWR-Methode, die punktweise Fehler (wie Verschiebungs-, mechanische Spannungs- oder Dehnungsfehler an einem bestimmten Punkt) abschätzen kann, wird bei elastischen Problemen angewendet. Es wurde jedoch kein Versuch unternommen, die DWR-Methode für die thermoelastischen Probleme zu formulieren. 14- In numerischen Simulationen sollte das Gitter verfeinert werden, um den Fehler zu verringern. Viele Verfeinerungstechniken basieren auf den globalen Fehlerschätzern, die versuchen, den Fehler der gesamten Lösung zu reduzieren. Daher sind diese Verfeinerungsmethoden zum reduzieren der lokalen Fehler nicht effizient. Wenn nur die Lösung an bestimmten Punkten interessiert ist und der Fehler dort reduziert werden will, sollten die zielorientierten Verfeinerungsmethoden angewendet werden, die vor dieser Untersuchung nicht in thermoelastischen Problemen entwickelt und implementiert wurden. 15- Die realen Probleme sind in der Regel 3D-Probleme, und die Simulation mit vereinfachten 2D-Fällen zeigt nicht alle Aspekte des Problems. Wie bereits erwähnt, sollten in der numerischen Simulation zur Erhöhung der Genauigkeit Gitterverfeinerungstechniken eingesetzt werden. Die konventionell verfeinerten Gitter, die durch gleichmäßige Aufteilung aller Elemente erreicht werden, erhöhen die Rechenzeit. Diese Simulationszeiterhöhung bei 3D-Problemen ist enorm. Dieses Problem wird durch die Verwendung der intelligenten Verfeinerung anstelle der globalen gleichmäßigen Verfeinerung gelöst. In diesem Projekt wurde erstmals die zielorientierte adaptive Gitterverfeinerung (AGV) bei thermoelastischen 3D-Problemen entwickelt und implementiert. Forschungsmethodik 16- In dieser Arbeit werden die beiden Haupttypen der thermoelastischen Probleme (KTE und KKTE) untersucht. Das System der partiellen Differentialgleichung der Thermoelastizität besteht aus zwei Hauptgleichungen: der herkömmlichen Gleichgewichtsgleichung und der Energiebilanzgleichung. 17- In diesem Projekt wird die Finite-Elemente-Methode (FEM) verwendet, um die Probleme numerisch zu simulieren. 18- Der Computercode zur Lösung von 2D- und 3D-Problemen wurde in den Program-miersprachen MATLAB bzw. C++ entwickelt. Um die Rechenzeit zu verkürzen und die Computerressourcen effizient zu nutzen, wurden Parallelprogrammierungs- und Optimierungsalgorithmen eingesetzt. 19- Nachdem die Probleme numerisch gelöst wurden, wurden zwei verschiedene Arten von globalen und lokalen Fehlerschätzungstechniken implementiert, um den Fehler zu schätzen und die Genauigkeit der Lösung zu messen. Der globale Typ ist die recovery-basierte zielorientierte Fehlerabschätzung, die wiederum in drei Unterkategorien von SPR-, L2-PR- und WSPR-Methoden unterteilt ist. Der lokale Typ ist die dual-gewichtete residuumsbasierte zielorientierte Fehlerabschätzung. Die Formulierung dieser Methoden wurde für thermoelastische Probleme entwickelt. 20- Schließlich wurde nach der Fehlerschätzung die entwickelte AGV-Methode implementiert. Wesentliche Ergebnisse und Schlussfolgerungen 21- In diesem Projekt wurde die Fehlerschätzung der Thermoelastizität in den folgenden drei Schritten untersucht: 1- Recovery-basierte Fehlerschätzung in statischen thermo Problemen (KTE), 2- Recovery-basierte Fehlerabschätzung in dynamischen thermo Problemen (KKTE), 3- Residuumsbasierte Fehlerschätzung in statischen thermo Problemen (KTE), 22- Im ersten Schritt, wurde das recovery-basierte Fehlerschätzverfahren auf mehrere stationäre thermoelastische Probleme angewendet. Einige der untersuchten Probleme verfügen über analytische Lösungen. Der Vergleich der numerischen Ergebnisse mit der analytischen (exakten) Lösung zeigt, dass die WSPR-Methode die genaueste unter den SPR, L2-PR und WSPR Techniken ist. 23- Darüber hinaus schließen wir aus den Ergebnissen des ersten Schritts, dass die zielorientierte Verfeinerung, im Vergleich zur herkömmlichen gleichmäßigen Total-Verfeinerungsmethode, nur ein Drittel der Unbekannten erfordert, um das Problem mit der gleichen Genauigkeit zu lösen. Daher benötigt die zielorientierte Adaptivität im Vergleich zu herkömmlichen Methoden viel weniger Rechenzeit, um die gleiche Genauigkeit zu erreichen. 24- Im zweiten Schritt, sind die Fehlerschätzungstechniken dieselben wie im ersten Schritt, aber die untersuchten Probleme sind dynamisch und nicht statisch. Der Vergleich der numerischen Ergebnisse mit den analytischen Ergebnissen in einem Benchmark-Problem bestätigt die Genauigkeit der verwendeten Methode. 25- Die Ergebnisse des zweiten Schritts zeigen, dass die geschätzten Fehler in allen gekoppelten Problemen niedriger sind als die ähnlichen ungekoppelten. Bei diesen Problemen reduziert die Implementierung der entwickelten adaptiven Methode den Fehler erheblich. 26- Im dritten Schritt wurde das residuumsbasierte Fehlerabschätzungsverfahren auf mehrere thermoelastische Probleme im stationären Zustand angewendet. In allen Beispielen wird die Genauigkeit der Methode durch analytische Lösungen überprüft. Die numerischen Ergebnisse zeigen eine sehr gute Übereinstimmung mit der analytischen Lösung sowohl bei 2D- als auch bei 3D-Problemen. 27- Im dritten Schritt werden die Ergebnisse der DWR-Verfeinerung mit Kelly-, W-Kelly- und gleichmäßigen Total-Verfeinerungstechniken verglichen. Die entwickelte DWR-Methode zeigt im Vergleich zu den anderen Methoden die beste Effizienz. Um beispielsweise die Fehlertoleranz von 10-6 zu erreichen, enthält das DWR-Gitter nur 2% unbekannte Parameter im Vergleich zu einem gleichmäßig verfeinerten Gitter. Die Verwendung des DWR-Verfahrens spart daher erhebliche Rechenzeit und Kosten. KW - Mesh Refinement KW - Thermoelastizität KW - Goal-oriented A Posteriori Error Estimation KW - 2D/3D Adaptive Mesh Refinement KW - Thermoelasticity KW - Deal ii C++ code KW - recovery-based and residual-based error estimators Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201113-42864 ER - TY - THES A1 - Reformat, Martin T1 - Zementmahlung - Untersuchungen zum Zusammenhang von Mahlaggregat und Materialeigenschaften N2 - Die Mahlung als Zerkleinerungsprozess stellt seit den Anfängen der Menschheit eine der wichtigsten Verarbeitungsformen von Materialien aller Art dar - von der Getreidemahlung, über das Aufschließen von Heilkräutern in Mörsern bis hin zur Herstellung von Tonern für Drucker und Kopierer. Besonders die Zementmahlung ist in modernen Gesellschaften sowohl ein wirtschaftlicher als auch ein ökologischer Faktor. Mehr als zwei Drittel der elektrischen Energie der Zementproduktion werden für Rohmehl- und Klinker- bzw. Kompositmaterialmahlung verbraucht. Dies ist nur ein Grund, warum der Mahlprozess zunehmend in den Fokus vieler Forschungs- und Entwicklungsvorhaben rückt. Die Komplexität der Zementmahlung steigt im zunehmenden Maße an. Die simple „Mahlung auf Zementfeinheit“ ist seit langem obsolet. Zemente werden maßgeschneidert, mit verschiedensten Kombinationsprodukten, getrennt oder gemeinsam, in unterschiedlichen Mahlaggregaten oder mit ganz neuen Ansätzen gefertigt. Darüber hinaus gewinnt auch der Sektor des Baustoffrecyclings, mit allen damit verbundenen Herausforderungen, immer mehr an Bedeutung. Bei der Fragestellung, wie der Mahlprozess einerseits leistungsfähige Produkte erzeugen kann und andererseits die zunehmenden Anforderungen an Nachhaltigkeit erfüllt, steht das Mahlaggregat im Mittelpunkt der Betrachtungen. Dementsprechend gliedert sich, neben einer eingehenden Literaturrecherche zum Wissensstand, die vorliegende Arbeit in zwei übergeordnete Teile: Im ersten Teil werden Untersuchungen an konventionellen Mahlaggregaten mit in der Zementindustrie verwendeten Kernprodukten wie Portlandzementklinker, Kalkstein, Flugasche und Hüttensand angestellt. Um eine möglichst effektive Mahlung von Zement und Kompositmaterialien zu gewährleisten, ist es wichtig, die Auswirkung von Mühlenparametern zu kennen. Hierfür wurde eine umfangreiche Versuchsmatrix aufgestellt und abgearbeitet. Das Spektrum der Analysemethoden war ebenfalls umfangreich und wurde sowohl auf die gemahlenen Materialien als auch auf die daraus hergestellten Zemente und Betone angewendet. Es konnte gezeigt werden, dass vor allem die Unterscheidung zwischen Mahlkörpermühlen und mahlkörperlosen Mühlen entscheidenden Einfluss auf die Granulometrie und somit auch auf die Zementperformance hat. Besonders stark wurden die Verarbeitungseigenschaften, insbesondere der Wasseranspruch und damit auch das Porengefüge und schließlich Druckfestigkeiten sowie Dauerhaftigkeitseigenschaften der aus diesen Zementen hergestellten Betone, beeinflusst. Bei Untersuchungen zur gemeinsamen Mahlung von Kalkstein und Klinker führten ungünstige Anreicherungseffekte des gut mahlbaren Kalksteins sowie tonigen Nebenbestandteilen zu einer schlechteren Performance in allen Zementprüfungen. Der zweite Teil widmet sich der Hochenergiemahlung. Die dahinterstehende Technik wird seit Jahrzehnten in anderen Wirtschaftsbranchen, wie der Pharmazie, Biologie oder auch Lebensmittelindustrie angewendet und ist seit einiger Zeit auch in der Zementforschung anzutreffen. Beispielhaft seien hier die Planeten- und Rührwerkskugelmühle als Vertreter genannt. Neben grundlegenden Untersuchungen an Zementklinker und konventionellen Kompositmaterialien wie Hüttensand und Kalkstein wurde auch die Haupt-Zementklinkerphase Alit untersucht. Die Hochenergiemahlung von konventionellen Kompositmaterialien generierte zusätzliche Reaktivität bei gleicher Granulometrie gegenüber der herkömmlichen Mahlung. Dies wurde vor allem bei per se reaktivem Zementklinker als auch bei latent-hydraulischem Hüttensand beobachtet. Gemahlene Flugaschen konnten nur im geringen Maße weiter aktiviert werden. Der generelle Einfluss von Oberflächenvergrößerung, Strukturdefekten und Relaxationseffekten eines Mahlproduktes wurden eingehend untersucht und gewichtet. Die Ergebnisse bei der Hochenergiemahlung von Alit zeigten, dass die durch Mahlung eingebrachten Strukturdefekte eine Erhöhung der Reaktivität zur Folge haben. Hierbei konnte festgestellt werden, das maßgeblich Oberflächendefekte, strukturelle (Volumen-)defekte und als Konterpart Selbstheilungseffekte die reaktivitätsbestimmenden Faktoren sind. Weiterhin wurden Versuche zur Mahlung von Altbetonbrechsand durchgeführt. Im Speziellen wurde untersucht, inwieweit eine Rückführung von Altbetonbrechsand, als unverwertbarer Teil des Betonbruchs, in Form eines Zement-Kompositmaterials in den Baustoffkreislauf möglich ist. Die hierfür verwendete Mahltechnik umfasst sowohl konventionelle Mühlen als auch Hochenergiemühlen. Es wurden Kompositzemente mit variiertem Recyclingmaterialanteil hergestellt und auf grundlegende Eigenschaften untersucht. Zur Bewertung der Produktqualität wurde der sogenannte „Aktivierungskoeffizient“ eingeführt. Es stellte sich heraus, dass die Rückführung von Altbetonbrechsand als potentielles Kompositmaterial wesentlich vom Anteil des Zementsteins abhängt. So konnte beispielsweise reiner Zementstein als aufgemahlenes Kompositmaterial eine bessere Performance gegenüber dem mit Gesteinskörnung beaufschlagtem Altbetonbrechsand ausweisen. Bezogen auf die gemessenen Hydratationswärmen und Druckfestigkeiten nahm der Aktivierungskoeffzient mit fallendem Abstraktionsgrad ab. Ebenfalls sank der Aktivierungskoeffizient mit steigendem Substitutionsgrad. Als Vergleich wurden dieselben Materialien in konventionellen Mühlen aufbereitet. Die hier erzielten Ergebnisse können teilweise der Hochenergiemahlung als gleichwertig beurteilt werden. Folglich ist bei der Aktivierung von Recyclingmaterialien weniger die Mahltechnik als der Anteil an aktivierbarem Zementstein ausschlaggebend. N2 - Grinding as a comminution process has been one of the most important forms of processing of all kinds of materials since the beginning of mankind - from grain grinding over digesting medicinal herbs in mortars to producing toners for printers and copiers. Cement grinding in particular is both an economic and an ecological factor in modern societies. More than two-thirds of the electrical energy of cement production is consumed for raw meal and clinker or composite material grinding. This is just one reason why the milling process is increasingly becoming the focus of many research and development projects. And the complexity of cement grinding is increasing. The simple demand to grind to a certain cement fineness is obsolete. Cements are custom-made with a variety of combination products, comminuted separately or together in different grinding units or made with completely new approaches. In addition, the sector of building materials recycling - with all the associated challenges - also wins more and more importance. In terms of the question of how the grinding process could produce high-performance products on the one hand and the increasing demands on sustainability on the other hand, the grinding devices are the focus of the considerations. Accordingly, in addition to an in-depth literature review on the state of knowledge, the present work is divided into two major parts: In the first part investigations are made on conventional grinding devices with core products used in the cement industry, such as Portland cement clinker, limestone, fly ash and granulated blast furnace slag. To ensure the most effective grinding of cement and composite materials, it is important to know the effect of grinding parameters. For this, an extensive experimental matrix was set up and processed. The spectrum of analysis methods was also extensive and was applied to both the milled materials and the cements and concretes made from them. It could be shown that especially the distinction between grinding media mills and non-grinding media mills has a decisive influence on the granulometry and thus also on the cement performance. The processing properties, especially the water demand and thus the pore structure and finally compressive strength and durability properties of the concretes made from these cements, have been strong influenced, particularly. In studies on the common grinding of limestone and clinker an unfavorable enrichment of easily grindable limestone and clayey secondary constituents led to a poorer performance in all cement tests. The second part is devoted to high-energy milling. The technology behind it has been used for decades in other sectors of the economy, such as pharmacy, biology and the food industry and has also been used in cement research for some time. As representatives, the planetary and stirred media ball mill may be mentioned here. In addition to basic investigations on cement clinker and conventional composite materials such as blast furnace slag and limestone, the main Portland cement clinker phase alite was also investigated. The high-energy milling of conventional composite materials generated additional reactivity with the same granulometry compared to conventional grinding. This was observed especially on per se reactive Portland cement clinker as well as on latent-hydraulic blast furnace slag. Ground fly ash could be activated only to a small extent. The general influence of surface enlargement, structural defects and relaxation effects of a ground product were thoroughly investigated and weighted as well. The high-energy milling results of alite showed that the structural defects introduced by milling result in an increased reactivity. It was found that mainly surface defects, structural (volume) defects and as counterpart self-healing effects are the factors determining reactivity. Furthermore, attempts were made to grind concrete waste sand (CDW). In particular, it was examined to what extent a return of CDW, as an unvaluable part of the concrete fracture, in the form of a cement composite material in the building material cycle is possible. The grinding technique used for this purpose includes both conventional mills and high-energy mills. Composite cements with a varied proportion of recycled material were produced and examined for their fundamental properties. For the evaluation of the product quality the so-called äctivation coefficient"was introduced. It was found that the return of used concrete crushed sand as a potential composite significantly depends on the content of the cement paste. For example, pure cement paste as a milled composite showed better performance than the aggregated contaminated CDW. Based on the measured heat of hydration and compressive strengths, the activation coefficient decreased with decreasing degree of abstraction and the activation coefficient also decreased with increasing degree of substitution. For comparison, the same materials were prepared in conventional mills. The results obtained here can be partly considered as equivalent to high-energy milling. Consequently, when activating recycled materials, the grinding technique is less important than the amount of activatable cement paste. KW - Zement KW - Beton KW - Mahlung KW - Zementmahlung KW - Mahlaggregat KW - Vertical roller mill Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201102-42794 SN - 978-3-00-067121-0 ER - TY - THES A1 - Elzanowski, Jerzy T1 - Ruin conversions : violence, architecture and commemoration in post-1944 Warsaw N2 - Promotion an der Bauhaus-Universität Weimar (Dr. phil.) und zugleich PhD an der University of British Columbia Vancouver. 2015 auf dem Server der University of British Columbia mit Embargo veröffentlicht. Das Embargo wird immer wieder verlängert. Aktuell: This item is embargoed until 2026-06-30, you need to request access to be able to view the item's media before that date. KW - Umwandlung KW - Ruine KW - Umbau Y1 - 2015 UR - http://hdl.handle.net/2429/50265 U6 - http://dx.doi.org/10.14288/1.0166955 ER - TY - THES A1 - Oucif, Chahmi T1 - Analytical Modeling of Self-Healing and Super Healing in Cementitious Materials N2 - Self-healing materials have recently become more popular due to their capability to autonomously and autogenously repair the damage in cementitious materials. The concept of self-healing gives the damaged material the ability to recover its stiffness. This gives a difference in comparing with a material that is not subjected to healing. Once this material is damaged, it cannot sustain loading due to the stiffness degradation. Numerical modeling of self-healing materials is still in its infancy. Multiple experimental researches were conducted in literature to describe the behavior of self-healing of cementitious materials. However, few numerical investigations were undertaken. The thesis presents an analytical framework of self-healing and super healing materials based on continuum damage-healing mechanics. Through this framework, we aim to describe the recovery and strengthening of material stiffness and strength. A simple damage healing law is proposed and applied on concrete material. The proposed damage-healing law is based on a new time-dependent healing variable. The damage-healing model is applied on isotropic concrete material at the macroscale under tensile load. Both autonomous and autogenous self-healing mechanisms are simulated under different loading conditions. These two mechanisms are denoted in the present work by coupled and uncoupled self-healing mechanisms, respectively. We assume in the coupled self-healing that the healing occurs at the same time with damage evolution, while we assume in the uncoupled self-healing that the healing occurs when the material is deformed and subjected to a rest period (damage is constant). In order to describe both coupled and uncoupled healing mechanisms, a one-dimensional element is subjected to different types of loading history. In the same context, derivation of nonlinear self-healing theory is given, and comparison of linear and nonlinear damage-healing models is carried out using both coupled and uncoupled self-healing mechanisms. The nonlinear healing theory includes generalized nonlinear and quadratic healing models. The healing efficiency is studied by varying the values of the healing rest period and the parameter describing the material characteristics. In addition, theoretical formulation of different self-healing variables is presented for both isotropic and anisotropic maerials. The healing variables are defined based on the recovery in elastic modulus, shear modulus, Poisson's ratio, and bulk modulus. The evolution of the healing variable calculated based on cross-section as function of the healing variable calculated based on elastic stiffness is presented in both hypotheses of elastic strain equivalence and elastic energy equivalence. The components of the fourth-rank healing tensor are also obtained in the case of isotropic elasticity, plane stress and plane strain. Recent research revealed that self-healing presents a crucial solution also for the strengthening of the materials. This new concept has been termed ``Super Healing``. Once the stiffness of the material is recovered, further healing can result as a strengthening material. In the present thesis, new theory of super healing materials is defined in isotropic and anisotropic cases using sound mathematical and mechanical principles which are applied in linear and nonlinear super healing theories. Additionally, the link of the proposed theory with the theory of undamageable materials is outlined. In order to describe the super healing efficiency in linear and nonlinear theories, the ratio of effective stress to nominal stress is calculated as function of the super healing variable. In addition, the hypotheses of elastic strain and elastic energy equivalence are applied. In the same context, new super healing matrix in plane strain is proposed based on continuum damage-healing mechanics. In the present work, we also focus on numerical modeling of impact behavior of reinforced concrete slabs using the commercial finite element package Abaqus/Explicit. Plain and reinforced concrete slabs of unconfined compressive strength 41 MPa are simulated under impact of ogive-nosed hard projectile. The constitutive material modeling of the concrete and steel reinforcement bars is performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. Damage diameters and residual velocities obtained by the numerical model are compared with the experimental results and effect of steel reinforcement and projectile diameter is studied. KW - Schaden KW - Beschädigung KW - Selbstheilung KW - Zementbeton KW - Damage KW - Healing KW - Concrete KW - Autonomous KW - Autogenous KW - Super Healing Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200831-42296 ER - TY - THES A1 - Gretzki, Allan T1 - BundeskunstHall of Fame - Realisierungsprozess eines Graffiti Ausstellungsprojekts im musealen Kontext N2 - Realisierungsprozess eines Graffiti Ausstellungsprojekts im musealen Kontext KW - Graffito KW - Graffiti Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200818-42158 ER - TY - THES A1 - Röder, Nina T1 - Formen des Lassens: Performative Strategien der Bildwerdung in der Inszenierten Fotografie N2 - Der Forschungsgegenstand dieser Arbeit basiert auf einer phänomenologischen Beobachtung internationaler fotografischer Positionen des Selbstportraits, welche seit den 1960er-Jahren verwandte Inhalte, gleichartige bildästhetische Merkmale und ähnliche Prozesse im fotografischen Herstellungsprozess aufweisen. Gemeinsam haben die in dieser Arbeit besprochenen Künstler*innen, dass sich ihre Bildwerdung am eigenen Körper vollzieht und an einen durch Bewegung gekennzeichneten Handlungsablauf geknüpft ist. Die jeweilige Bildsprache weist eine ephemere Ästhetik aus, in welcher inhaltlich sowohl der physische als auch der philosophisch gemeinte Begriff des (Los-)lassens eine Rolle spielt. Die künstlerischen Positionen, die Gegenstand dieser Ph.D.-Arbeit sind, umfassen Arbeiten von Bas Jan Ader (1942 – 1975), Francesca Woodman (1958 – 1981), Bernhard (1937 – 2011) und Anna Blume (*1937), Antoine d’Agata (*1961) und Tom Pope (*1986). KW - Fotografie KW - Performativität KW - Selbstbildnis KW - Lassen KW - Performative Fotografie KW - Fotografie als Handlung KW - Performative Strategien KW - Inszenierte Fotografie KW - Selbstportrait Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200817-42142 ER - TY - THES A1 - Chan, Chiu Ling T1 - Smooth representation of thin shells and volume structures for isogeometric analysis N2 - The purpose of this study is to develop self-contained methods for obtaining smooth meshes which are compatible with isogeometric analysis (IGA). The study contains three main parts. We start by developing a better understanding of shapes and splines through the study of an image-related problem. Then we proceed towards obtaining smooth volumetric meshes of the given voxel-based images. Finally, we treat the smoothness issue on the multi-patch domains with C1 coupling. Following are the highlights of each part. First, we present a B-spline convolution method for boundary representation of voxel-based images. We adopt the filtering technique to compute the B-spline coefficients and gradients of the images effectively. We then implement the B-spline convolution for developing a non-rigid images registration method. The proposed method is in some sense of “isoparametric”, for which all the computation is done within the B-splines framework. Particularly, updating the images by using B-spline composition promote smooth transformation map between the images. We show the possible medical applications of our method by applying it for registration of brain images. Secondly, we develop a self-contained volumetric parametrization method based on the B-splines boundary representation. We aim to convert a given voxel-based data to a matching C1 representation with hierarchical cubic splines. The concept of the osculating circle is employed to enhance the geometric approximation, where it is done by a single template and linear transformations (scaling, translations, and rotations) without the need for solving an optimization problem. Moreover, we use the Laplacian smoothing and refinement techniques to avoid irregular meshes and to improve mesh quality. We show with several examples that the method is capable of handling complex 2D and 3D configurations. In particular, we parametrize the 3D Stanford bunny which contains irregular shapes and voids. Finally, we propose the B´ezier ordinates approach and splines approach for C1 coupling. In the first approach, the new basis functions are defined in terms of the B´ezier Bernstein polynomials. For the second approach, the new basis is defined as a linear combination of C0 basis functions. The methods are not limited to planar or bilinear mappings. They allow the modeling of solutions to fourth order partial differential equations (PDEs) on complex geometric domains, provided that the given patches are G1 continuous. Both methods have their advantages. In particular, the B´ezier approach offer more degree of freedoms, while the spline approach is more computationally efficient. In addition, we proposed partial degree elevation to overcome the C1-locking issue caused by the over constraining of the solution space. We demonstrate the potential of the resulting C1 basis functions for application in IGA which involve fourth order PDEs such as those appearing in Kirchhoff-Love shell models, Cahn-Hilliard phase field application, and biharmonic problems. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2020,2 KW - Modellierung KW - Isogeometrische Analyse KW - NURBS KW - Geometric Modeling KW - Isogeometric Analysis KW - NURBS Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200812-42083 ER - TY - THES A1 - Camerin, Federico T1 - THE ROLE OF THE GREAT PROPERTY IN THE EUROPEAN CITY-MAKING PROCESS IN THE LAST THIRD OF THE 20th CENTURY. MILITARY PROPERTY AS REFERENCE N2 - The thesis concerns a work of urban history intended not to describe the city but rather to interpret it. By doing so, I have interpreted the city by means of the role played by the so-called ‘great property’ in the European city-making process during the last three decades of the 20th century, specifically focused on the concrete case of military properties in Italy. I have also considered the role played by other kinds of great properties, i.e. industries and railway, which previously acted in the production of the built environment in a different way respect to the military one. As all of them have as common denominator the fact of being ‘capital in land’, I analysed great industrial and railway properties in order to extrapolate a methodology which helped me to interpret the relationship between military properties and city-making process in Europe in the late 20th century. I have analysed the relationship between the capital in land and the city-making process on the ground of the understanding the interrelation between the great property, the urban development, and the agents involved in the urban and territorial planning. Here I have showed that urban planning is not the decisive factor influencing the citymaking process, but instead the power held by the capital in land. I have found that is the great property the trigger of the creation of new ‘areas of centrality’ intended as large areas for consumerism. As far as the role played by great property is concerned, I have also discovered that it has evolved over time. Originally, industrial and railway properties have been regenerated into a wide range of new profit-driven spaces; successively, I have found out that most of the regeneration of military premises aimed to materialise areas of centrality. The way of interpreting this factor has been based on focusing my attention on the military premises in Italy: I have classified their typology when they have been built and, most importantly, when they have been regenerated into new areas of centrality. N2 - El trabajo aborda el entendimiento del proceso de construcción de la ciudad europea durante el último tercio del siglo XX, desde el protagonismo y el papel ejercido por la Gran Propiedad, un nuevo concepto elaborado ad hoc dentro del Programa Europeo European Joint Doctorate “urbanHist” en especial, aquella que se identifica con las instalaciones militares en Italia. El intento es esbozar un planteamiento teórico que nos permita un entendimiento de los fenómenos que asisten al proceso de construcción histórico de las ciudades europeas. Bien entendido, que los presupuestos teóricos esbozados se verificarán, en un intento por elaborar una “praxis-teórica”, con ejemplos, casos estudio, extraídos de la realidad construida que identifica a algunas ciudades europeas. T2 - EL PAPEL DE LA GRAN PROPIEDAD EN EL PROCESO DE CONSTRUCCIÓN DE LA CIUDAD EUROPEA DURANTE EL ÚLTIMO TERCIO DEL SIGLO XX. LAS PROPIEDADES MILITARES COMO REFERENTE KW - Stadtplanung KW - Stadtgeschichte KW - Urbanität KW - European city-making process KW - capitalist city KW - urban regeneration KW - urban development KW - urban planning KW - urban history KW - urbanism Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200714-42018 ER - TY - THES A1 - Ettinger, Ulrike T1 - FASHIONABLY NATIONAL! ‚Volkstracht‘ als Ressource im sozialistischen Rumänien aus der Perspektive von Forschung und Kunst N2 - Ausgehend von der vielfachen Verwertung der bäuerlichen Kleidung durch den Staat während des Sozialismus in Rumänien wird in der Arbeit das ‚Gemacht-Sein‘ von Volkstrachten befragt entlang von im untersuchten Zeitraum wirkenden Diskursen, wie dem Prozess der Modernisierung oder der Hervorhebung nationaler Werte. Die künstlerische Forschung setzt dabei auf Simulacra (Roland Barthes). Ziel war, tradierte Formate der Wissensaufbereitung und -verbreitung zu appropriieren, so auch von Strategien, die auf der Ebene von Bildern und Sprache agieren, um eine Re-Lektüre sowohl von ‚Volkstracht‘ im Sozialismus als auch von ihren Entsprechungen nach 1989 zu ermöglichen. N2 - Based on the multiple use of peasant clothing by the government during socialism in Romania, this study questions the making of folk costumes along discourses effective in the investigated time period, such as the process of modernization or the enhancement of national values. The artistic research thereby relies on simulacra (Roland Barthes). The aim was to appropriate established formats of processing and disseminating knowledge, including strategies that operate on the level of images and language, in order to enable a re-reading of both folk costumes under socialism as well as their equivalents after 1989. T2 - FASHIONABLY NATIONAL! ‚Folk Costume‘ as a resource in socialist Romania from the perspective of research and art KW - Tracht KW - Volkstracht KW - Rumänien KW - Sozialismus KW - Postkommunismus KW - Artefakt KW - Display KW - Künstlerische Forschung KW - vestimentäre Moderne KW - Nation-building KW - Postsozialismus Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200702-41891 ER - TY - THES A1 - Salavati, Mohammad T1 - Multi-Scale Modeling of Mechanical and Electrochemical Properties of 1D and 2D Nanomaterials, Application in Battery Energy Storage Systems N2 - Material properties play a critical role in durable products manufacturing. Estimation of the precise characteristics in different scales requires complex and expensive experimental measurements. Potentially, computational methods can provide a platform to determine the fundamental properties before the final experiment. Multi-scale computational modeling leads to the modeling of the various time, and length scales include nano, micro, meso, and macro scales. These scales can be modeled separately or in correlation with coarser scales. Depend on the interested scales modeling, the right selection of multi-scale methods leads to reliable results and affordable computational cost. The present dissertation deals with the problems in various length and time scales using computational methods include density functional theory (DFT), molecular mechanics (MM), molecular dynamics (MD), and finite element (FE) methods. Physical and chemical interactions in lower scales determine the coarser scale properties. Particles interaction modeling and exploring fundamental properties are significant challenges of computational science. Downscale modelings need more computational effort due to a large number of interacted atoms/particles. To deal with this problem and bring up a fine-scale (nano) as a coarse-scale (macro) problem, we extended an atomic-continuum framework. The discrete atomic models solve as a continuum problem using the computationally efficient FE method. MM or force field method based on a set of assumptions approximates a solution on the atomic scale. In this method, atoms and bonds model as a harmonic oscillator with a system of mass and springs. The negative gradient of the potential energy equal to the forces on each atom. In this way, each bond's total potential energy includes bonded, and non-bonded energies are simulated as equivalent structural strain energies. Finally, the chemical nature of the atomic bond is modeled as a piezoelectric beam element that solves by the FE method. Exploring novel materials with unique properties is a demand for various industrial applications. During the last decade, many two-dimensional (2D) materials have been synthesized and shown outstanding properties. Investigation of the probable defects during the formation/fabrication process and studying their strength under severe service life are the critical tasks to explore performance prospects. We studied various defects include nano crack, notch, and point vacancy (Stone-Wales defect) defects employing MD analysis. Classical MD has been used to simulate a considerable amount of molecules at micro-, and meso- scales. Pristine and defective nanosheet structures considered under the uniaxial tensile loading at various temperatures using open-source LAMMPS codes. The results were visualized with the open-source software of OVITO and VMD. Quantum based first principle calculations have been conducting at electronic scales and known as the most accurate Ab initio methods. However, they are computationally expensive to apply for large systems. We used density functional theory (DFT) to estimate the mechanical and electrochemical response of the 2D materials. Many-body Schrödinger's equation describes the motion and interactions of the solid-state particles. Solid describes as a system of positive nuclei and negative electrons, all electromagnetically interacting with each other, where the wave function theory describes the quantum state of the set of particles. However, dealing with the 3N coordinates of the electrons, nuclei, and N coordinates of the electrons spin components makes the governing equation unsolvable for just a few interacted atoms. Some assumptions and theories like Born Oppenheimer and Hartree-Fock mean-field and Hohenberg-Kohn theories are needed to treat with this equation. First, Born Oppenheimer approximation reduces it to the only electronic coordinates. Then Kohn and Sham, based on Hartree-Fock and Hohenberg-Kohn theories, assumed an equivalent fictitious non-interacting electrons system as an electron density functional such that their ground state energies are equal to a set of interacting electrons. Exchange-correlation energy functionals are responsible for satisfying the equivalency between both systems. The exact form of the exchange-correlation functional is not known. However, there are widely used methods to derive functionals like local density approximation (LDA), Generalized gradient approximation (GGA), and hybrid functionals (e.g., B3LYP). In our study, DFT performed using VASP codes within the GGA/PBE approximation, and visualization/post-processing of the results realized via open-source software of VESTA. The extensive DFT calculations are conducted 2D nanomaterials prospects as anode/cathode electrode materials for batteries. Metal-ion batteries' performance strongly depends on the design of novel electrode material. Two-dimensional (2D) materials have developed a remarkable interest in using as an electrode in battery cells due to their excellent properties. Desirable battery energy storage systems (BESS) must satisfy the high energy density, safe operation, and efficient production costs. Batteries have been using in electronic devices and provide a solution to the environmental issues and store the discontinuous energies generated from renewable wind or solar power plants. Therefore, exploring optimal electrode materials can improve storage capacity and charging/discharging rates, leading to the design of advanced batteries. Our results in multiple scales highlight not only the proposed and employed methods' efficiencies but also promising prospect of recently synthesized nanomaterials and their applications as an anode material. In this way, first, a novel approach developed for the modeling of the 1D nanotube as a continuum piezoelectric beam element. The results converged and matched closely with those from experiments and other more complex models. Then mechanical properties of nanosheets estimated and the failure mechanisms results provide a useful guide for further use in prospect applications. Our results indicated a comprehensive and useful vision concerning the mechanical properties of nanosheets with/without defects. Finally, mechanical and electrochemical properties of the several 2D nanomaterials are explored for the first time—their application performance as an anode material illustrates high potentials in manufacturing super-stretchable and ultrahigh-capacity battery energy storage systems (BESS). Our results exhibited better performance in comparison to the available commercial anode materials. KW - Batterie KW - Modellierung KW - Nanostrukturiertes Material KW - Mechanical properties KW - Multi-scale modeling KW - Energiespeichersystem KW - Elektrodenmaterial KW - Elektrode KW - Mechanische Eigenschaft KW - Elektrochemische Eigenschaft KW - Electrochemical properties KW - Battery development KW - Nanomaterial Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200623-41830 ER - TY - THES A1 - Abu Bakar, Ilyani Akmar T1 - Computational Analysis of Woven Fabric Composites: Single- and Multi-Objective Optimizations and Sensitivity Analysis in Meso-scale Structures N2 - This study permits a reliability analysis to solve the mechanical behaviour issues existing in the current structural design of fabric structures. Purely predictive material models are highly desirable to facilitate an optimized design scheme and to significantly reduce time and cost at the design stage, such as experimental characterization. The present study examined the role of three major tasks; a) single-objective optimization, b) sensitivity analyses and c) multi-objective optimization on proposed weave structures for woven fabric composites. For single-objective optimization task, the first goal is to optimize the elastic properties of proposed complex weave structure under unit cells basis based on periodic boundary conditions. We predict the geometric characteristics towards skewness of woven fabric composites via Evolutionary Algorithm (EA) and a parametric study. We also demonstrate the effect of complex weave structures on the fray tendency in woven fabric composites via tightness evaluation. We utilize a procedure which does not require a numerical averaging process for evaluating the elastic properties of woven fabric composites. The fray tendency and skewness of woven fabrics depends upon the behaviour of the floats which is related to the factor of weave. Results of this study may suggest a broader view for further research into the effects of complex weave structures or may provide an alternative to the fray and skewness problems of current weave structure in woven fabric composites. A comprehensive study is developed on the complex weave structure model which adopts the dry woven fabric of the most potential pattern in singleobjective optimization incorporating the uncertainties parameters of woven fabric composites. The comprehensive study covers the regression-based and variance-based sensitivity analyses. The second task goal is to introduce the fabric uncertainties parameters and elaborate how they can be incorporated into finite element models on macroscopic material parameters such as elastic modulus and shear modulus of dry woven fabric subjected to uni-axial and biaxial deformations. Significant correlations in the study, would indicate the need for a thorough investigation of woven fabric composites under uncertainties parameters. The study describes here could serve as an alternative to identify effective material properties without prolonged time consumption and expensive experimental tests. The last part focuses on a hierarchical stochastic multi-scale optimization approach (fine-scale and coarse-scale optimizations) under geometrical uncertainties parameters for hybrid composites considering complex weave structure. The fine-scale optimization is to determine the best lamina pattern that maximizes its macroscopic elastic properties, conducted by EA under the following uncertain mesoscopic parameters: yarn spacing, yarn height, yarn width and misalignment of yarn angle. The coarse-scale optimization has been carried out to optimize the stacking sequences of symmetric hybrid laminated composite plate with uncertain mesoscopic parameters by employing the Ant Colony Algorithm (ACO). The objective functions of the coarse-scale optimization are to minimize the cost (C) and weight (W) of the hybrid laminated composite plate considering the fundamental frequency and the buckling load factor as the design constraints. Based on the uncertainty criteria of the design parameters, the appropriate variation required for the structural design standards can be evaluated using the reliability tool, and then an optimized design decision in consideration of cost can be subsequently determined. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2020,1 KW - Verbundwerkstoff KW - Gewebeverbundwerkstoff KW - woven composites Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200605-41762 SN - 1610-7381 ER - TY - THES A1 - Schmitz, Tonia Annick T1 - Entwicklung und Bilanzierung eines Photobioreaktorsystems zur Makroalgenkultivierung am Standort einer landwirtschaftlichen Biogasanlage N2 - Marine Makroalgen besitzen vielversprechende Eigenschaften und Inhaltsstoffe für die Verwendung als Energieträger, Nahrungsmittel oder als Ausgangsstoff für Pharmazeutika. Dass die Quantität und Qualität der in natürlicher Umgebung wachsenden Makroalgen schwankt, reduziert jedoch deren Verwertbarkeit und erschwert die Erschließung hochpreisiger Marktsegmente. Zudem ist eine Ausweitung der Zucht in marinen und küstennahen Aquakulturen in Europa gegenwärtig wenig aussichtsreich, da vielversprechende Areale bereits zum Fischfang oder als Erholungs- bzw. Naturschutzgebiete ausgewiesen sind. Im Rahmen dieser Arbeit wird demzufolge ein geschlossenes Photobioreaktorsystem zur Makroalgenkultivierung entwickelt, welches eine umfassende Kontrolle der abiotischen Kultivierungsparameter und eine effektive Aufbereitung des Kulturmediums vorsieht, um eine standortunabhängige Algenproduktion zu ermöglichen. Zur Bilanzierung des Gesamtkonzeptes einer Kultivierung und Verwertung (stofflich oder energetisch) werden die spezifischen Wachstumsraten und Methanbildungspotentiale der Algenarten Ulva intestinalis, Fucus vesiculosus und Palmaria palmata in praktischen Versuchen ermittelt. Im Ergebnis wird für den gegenwärtigen Entwicklungsstand der Kultivierungsanlage eine positive Bilanz für die stoffliche Verwertung der Algenart Ulva intestinalis und eine negative Bilanz für die energetische Verwertung aller untersuchten Algenarten erzielt. Wird ein Optimalszenario betrachtet, indem die Besatzdichten und Wachstumsraten der Algen in der Zucht erhöht werden, bleibt die Energiebilanz negativ. Allerdings summieren sich die finanzielle Einnahmen durch einen Verkauf der Algen als Produkt auf jährlich 460.869€ für Ulva intestinalis, 4.010€ für Fucus vesiculosus und 16.913€ für Palmaria palmata. Im Ergebnis ist insbesondere eine stoffliche Verwertung der gezüchteten Grünalge Ulva intestinalis anzustreben und die Produktivität der Zuchtanlage im Sinne des Optimalszenarios zu steigern. N2 - Marine macroalgae have renown properties as feedstock for fuel, food or pharmaceuticals. However, since the quantity and quality of naturally grown algae vary widely, their exploitability is reduced – especially for producers in high priced markets. Moreover, the expansion of marine or shore-based cultivation systems is unlikely in Europe, since promising sites either lie in fishing zones, recreational areas or natural reserves. The aim of this thesis was therefore to develop a closed photobioreactor system enabling full control of abiotic environmental parameters and an effective reconditioning of the cultivation medium in order to produce marine macroalgae at sites distant from shore. Using environmental management accounting methods, the potential output of macroalgae cultivation and valorization (product- or energy-based) is being assessed based on the specific growth rates and methane yields achievable with the species Ulva intestinalis, Fucus vesiculosus and Palmaria palmata. The balancing results for the status quo of the developed cultivation system show a positive outcome for a product-based valorization of the species Ulva intestinalis and a negative outcome for an energy-based valorization of all species investigated. Considering an optimum scenario providing an increase of growth rates and culture density, the balance of an energy-based valorization remains negative for all three species. However, the financial income by selling the cultivated macroalgae as a product sums up to a yearly amount of 460.869€ for Ulva intestinalis, 4.010€ for Fucus vesiculosus and 16.913€ for Palmaria palmata. Concluding, a product-based valorization seems promising – especially for the green algae Ulva intestinalis – when the productivity of the developed cultivation system is increased in accordance to the framework of the optimum scenario. KW - Makroalgen KW - Photobioreaktor KW - Biogas KW - Makroalgen KW - Photobioreaktorsystem KW - Biogasproduktion Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200604-41774 ER - TY - THES A1 - Lee, Sihyo T1 - The making of totalitarian city in Pyongyang: The spatial transition from free to ideology, and for marketization N2 - Space is a social product and a social producer. The main aim of this thesis is to reveal ‘the process of totalitarian city making in Pyongyang’, especially in the light of the interaction between the power and urban space. The totalitarian city of Pyongyang was born out of modernization in the process of masses formation. During the growth of colonial capitalism and Christian liberal ideas, Pyongyang was modernized and displayed the characteristics of a modern city with industrialization and urbanization. During the introduction of Japanese colonial capitalism, peasants, women, and slaves became the first masses and urban poor, and they later transformed into the mob; their violence was finally demonstrated during the Anti-Chinese Riot. After the 1945 independence, Kim’s regime formed the one-party state with a cry for revolution. They produced an atmosphere of imminent war to instill fear and hatred into the psyche of Pyongyang citizens. The regime eliminated all political opponents in 1967 and finally declared the totalitarian ideology in 1974. During this process, Pyongyang demonstrated two main characteristics of a totalitarian city: the space of terror and of ideology. The space of terror produces the fear of death and the space of ideology controls the thought and life of citizens. After entry to the market, to keep Kim’s controlling power, the regime used the strategy of location exchange. The camp, market, and Foreign Currency Shop were effective tools to prepare for executives’ gifts. However, the market also produces the desire not only for consumption but also for freedom and truth; it is tearing down the foundation of the totalitarian city of Pyongyang. This research focuses primarily on the interaction between political power and urban space. In the process of making a totalitarian city, the power produced urban space and it influenced the psyche of Pyongyang citizens. Even though this spatial transition has created the totalitarian city and helped maintain political power, it also led and produced intended or unintended social variation in Pyongyang society. KW - Pyongyang KW - totalitarian city KW - Stadtbild KW - Pyongyang KW - North Korea KW - space of ideology KW - spatial transition KW - ideological space KW - colonialcity KW - socialist city KW - space of terror Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200526-41731 ER - TY - THES A1 - Elazzazy, Mohamed T1 - The Garden Suburbs of Cairo. A morphological urban analysis of Zamālik, Ma‘ādī, and Heliopolis N2 - During the British occupation of Egypt in the beginning of the 20th century, several suburban developments were established on the periphery of the city of Cairo. These initially attracted the small British community and later foreigners and Egyptians, mainly from the elite community. These suburban developments, including Ma‘ādī, Zamālik, Heliopolis, Qubbah-Gardens, and Garden City, became the fashionable residential quarters of Cairo. Until now, some of these areas still represent the distinguishable residential settlements of the city. Ma‘ādī, Zamālik, and Heliopolis specifically are nostalgically appropriated in the design of recent suburban developments around Greater Cairo. Some of the 20th century suburban developments around Cairo are labeled or described as “garden cities.” During the early 20th century, two thriving British town planning movements emerged, namely, the garden city movement and the garden suburb movement. This study investigates the hypothesis that these suburban developments, are indeed “garden suburbs” like the British movement, despite that few are labeled or described as “garden cities,”. Although several studies have examined the historical development of such settlements, their relation, however, to the British planning movements and their transfer process received little attention from planning historians. Few studies also analyze the urban design aspects that made these suburban developments distinguishable since their foundation and until today. To guide the validity of this study’s hypothesis, a set of research questions are formulated: (1) What is the difference between the garden city and the garden suburb movements? (2) How were the British planning movements transferred to Egypt? (3) What are the urban design aspects that makes these suburban developments distinguishable as garden suburbs? To answer these research questions, a historical morphological urban analysis is conducted through case studies. The study first studies the difference between the garden city and the garden suburb movements, mainly in Britain, through the analysis of publications on the promoter of both movements: for the garden city, E. Howards’ book “The Garden City of Tomorrow,” published in 1902, and for the garden suburb, R. Unwin’s books “Town Planning in Practice,” published in 1909, and “Nothing Gained from Overcrowding,” published in 1912. Then a morphological urban analysis of Letchworth Garden City and Brentham Garden Suburb, considered the first examples of each movement, is conducted. In order to analyze the transfer process, the study adopts M. Volait and J. Nasr’s theory on transporting planning, through investigating the authority in power responsible for the establishment of these suburban developments. This is followed by the morphological urban analysis of three suburban developments around Cairo, namely, Zamālik, Ma‘ādī, and Heliopolis. The morphological analysis focuses on the background of their establishment, authority in power responsible for the development, design principles, urban context, street typology, residential block typology, social infrastructure, and social target group. Finally, the study compares between Brentham, Letchworth, Zamālik, Ma‘ādī, and Heliopolis. The comparative analysis aims to highlight the differences between the studied cases of Cairo and how they are different from or alike the British movements. This study concludes that the suburban developments around Cairo during the British occupation, are in fact garden suburbs, despite that some are being described or labeled as garden city. This movement was exported via urban land development companies with foreign European capital, rather than via colonial dominance. It finally highlights a set of urban design aspects that distinguish them as garden suburbs of Cairo. This study hopes to support future conservation plan of these areas and the design of future suburban developments. KW - Kairo KW - Gartenstadt KW - Großbritannien KW - Städtebau KW - Egypt KW - Britain KW - Development KW - town planning KW - transfer KW - Gartenvorort Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200506-41491 ER - TY - THES A1 - Radmard Rahmani, Hamid T1 - Artificial Intelligence Approach for Seismic Control of Structures N2 - Abstract In the first part of this research, the utilization of tuned mass dampers in the vibration control of tall buildings during earthquake excitations is studied. The main issues such as optimizing the parameters of the dampers and studying the effects of frequency content of the target earthquakes are addressed. Abstract The non-dominated sorting genetic algorithm method is improved by upgrading generic operators, and is utilized to develop a framework for determining the optimum placement and parameters of dampers in tall buildings. A case study is presented in which the optimal placement and properties of dampers are determined for a model of a tall building under different earthquake excitations through computer simulations. Abstract In the second part, a novel framework for the brain learning-based intelligent seismic control of smart structures is developed. In this approach, a deep neural network learns how to improve structural responses during earthquake excitations using feedback control. Abstract Reinforcement learning method is improved and utilized to develop a framework for training the deep neural network as an intelligent controller. The efficiency of the developed framework is examined through two case studies including a single-degree-of-freedom system and a high-rise building under different earthquake excitation records. Abstract The results show that the controller gradually develops an optimum control policy to reduce the vibrations of a structure under an earthquake excitation through a cyclical process of actions and observations. Abstract It is shown that the controller efficiently improves the structural responses under new earthquake excitations for which it was not trained. Moreover, it is shown that the controller has a stable performance under uncertainties. KW - Erdbeben KW - seismic control KW - tuned mass damper KW - reinforcement learning KW - earthquake KW - machine learning KW - Operante Konditionierung KW - structural control Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200417-41359 ER - TY - THES A1 - Jentzsch, Sina T1 - Appell der Dinge. Künstlerische Zuwendung zu den Dingen in den 1960er-Jahren N2 - Diese Dissertation beschäftigt sich mit Kunstwerken, die das alltägliche Ding in den Blick nehmen. Nährboden dieser Kunstform sind die soziokulturellen Entwicklungen des 20. Jahrhunderts, mit denen wesentliche Veränderungen hinsichtlich des Verhältnisses von Mensch und Ding einhergingen. Daraus resultierte eine allgemeine künstlerische Zuwendung zu den Dingen und eine einzigartige Kulmination aus verschiedenartigen Auseinandersetzungen mit ihnen als kunstfähige Gegenstände, über die sich die neue Dingwelt erschlossen wurde und deren Kunstwerke einen Spiegel dieser Entwicklungen darstellen. Die Dissertation stellt ebenfalls die Dinge selbst in den Fokus. Vier Aspekte von Dingen (Materialität, Funktionalität, Repräsentationalität und Relationalität) werden gesondert ins Auge gefasst und in den theoretischen Diskurs des 20. Jahrhunderts eingeordnet, um sie als Teil der gelebten Realität besser zu verstehen, von der sich der ästhetische Blick nicht trennen lässt. Anhand der künstlerischen Positionen von Robert Rauschenberg, Christo und Jeanne-Claude, Daniel Spoerri und Arman sowie Claes Oldenburg werden die verschiedenen Aspekte der Dinge näher betrachtet und analysiert, wie diese speziell in den Kunstwerken thematisiert werden und welche Relevanz sie für deren Rezeptionserfahrung haben. Die Korrelation dieser beiden Ebenen - die Dinge als konstitutiver Bestandteil im sozialen Raum und die Dinge als Elemente in Kunstwerken -, die im Fokus der vorliegenden Untersuchung steht, ermöglicht es, die künstlerische Zuwendung zu den Dingen in den 1960er-Jahren neu einzuordnen. Darüber hinaus wird dadurch ein differenziertes Bild von der Kunst dieser Zeit sowie den Dingen in der Kunst im Allgemeinen gezeichnet. N2 - This dissertation deals with works of art that focus on everyday things. The basis for this art form are the sociocultural developments of the 20th century, which have brought major changes in the relationship between people and things. This resulted in a general artistic devotion to things and a unique culmination of different confrontations with them as artful objects, through which the new world of things was opened up and whose works of art reflect these developments. Therefor the dissertation focuses on things themselves. Four aspects of things (materiality, functionality, representationality and Relationality) are considered separately and classified within the theoretical discourse of the 20th century in order to understand them as part of the everyday reality, from which the aesthetic view cannot be separated. Based on the artistic positions of Robert Rauschenberg, Christo and Jeanne-Claude, Daniel Spoerri and Arman as well as Claes Oldenburg the different aspects of things are examined and it is analyzed, how they are specifically highlighted in the artworks and how they become relevant for the art works reception experience. The correlation of these two levels - things as a constitutive component in social space and things as elements in works of art - makes it possible to classify this artistic devotion to things in the 1960s. It also creates a differentiated picture of the art of the time and of things in art in general. KW - Ding KW - Kunst KW - Christo KW - Arman KW - Pop-Art KW - Rauschenberg KW - Spoerri KW - Dingdiskurs KW - Oldenburg KW - Nouveau Realisme Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200323-41129 ER - TY - THES A1 - Kavrakov, Igor T1 - Synergistic Framework for Analysis and Model Assessment in Bridge Aerodynamics and Aeroelasticity N2 - Wind-induced vibrations often represent a major design criterion for long-span bridges. This work deals with the assessment and development of models for aerodynamic and aeroelastic analyses of long-span bridges. Computational Fluid Dynamics (CFD) and semi-analytical aerodynamic models are employed to compute the bridge response due to both turbulent and laminar free-stream. For the assessment of these models, a comparative methodology is developed that consists of two steps, a qualitative and a quantitative one. The first, qualitative, step involves an extension of an existing approach based on Category Theory and its application to the field of bridge aerodynamics. Initially, the approach is extended to consider model comparability and completeness. Then, the complexity of the CFD and twelve semi-analytical models are evaluated based on their mathematical constructions, yielding a diagrammatic representation of model quality. In the second, quantitative, step of the comparative methodology, the discrepancy of a system response quantity for time-dependent aerodynamic models is quantified using comparison metrics for time-histories. Nine metrics are established on a uniform basis to quantify the discrepancies in local and global signal features that are of interest in bridge aerodynamics. These signal features involve quantities such as phase, time-varying frequency and magnitude content, probability density, non-stationarity, and nonlinearity. The two-dimensional (2D) Vortex Particle Method is used for the discretization of the Navier-Stokes equations including a Pseudo-three dimensional (Pseudo-3D) extension within an existing CFD solver. The Pseudo-3D Vortex Method considers the 3D structural behavior for aeroelastic analyses by positioning 2D fluid strips along a line-like structure. A novel turbulent Pseudo-3D Vortex Method is developed by combining the laminar Pseudo-3D VPM and a previously developed 2D method for the generation of free-stream turbulence. Using analytical derivations, it is shown that the fluid velocity correlation is maintained between the CFD strips. Furthermore, a new method is presented for the determination of the complex aerodynamic admittance under deterministic sinusoidal gusts using the Vortex Particle Method. The sinusoidal gusts are simulated by modeling the wakes of flapping airfoils in the CFD domain with inflow vortex particles. Positioning a section downstream yields sinusoidal forces that are used for determining all six components of the complex aerodynamic admittance. A closed-form analytical relation is derived, based on an existing analytical model. With this relation, the inflow particles’ strength can be related with the target gust amplitudes a priori. The developed methodologies are combined in a synergistic framework, which is applied to both fundamental examples and practical case studies. Where possible, the results are verified and validated. The outcome of this work is intended to shed some light on the complex wind–bridge interaction and suggest appropriate modeling strategies for an enhanced design. T3 - Schriftenreihe des DFG Graduiertenkollegs 1462 Modellqualitäten // Graduiertenkolleg Modellqualitäten - 21 KW - Brücke KW - Bridge KW - Computational Fluid Dynamics KW - Aerodynamics KW - Aeroelasticity KW - Category Theory KW - Aerodynamik KW - Aeroelastizität Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200316-41099 UR - https://asw-verlage.de/katalog/?id=2255 SN - 978-3-95773-284-2 PB - Bauhaus-Universitätsverlag CY - Weimar ER - TY - THES A1 - Hossein Nezhad Shirazi, Ali T1 - Multi-Scale Modeling of Lithium ion Batteries: a thermal management approach and molecular dynamic studies N2 - Rechargeable lithium ion batteries (LIBs) play a very significant role in power supply and storage. In recent decades, LIBs have caught tremendous attention in mobile communication, portable electronics, and electric vehicles. Furthermore, global warming has become a worldwide issue due to the ongoing production of greenhouse gases. It motivates solutions such as renewable sources of energy. Solar and wind energies are the most important ones in renewable energy sources. By technology progress, they will definitely require batteries to store the produced power to make a balance between power generation and consumption. Nowadays,rechargeable batteries such as LIBs are considered as one of the best solutions. They provide high specific energy and high rate performance while their rate of self-discharge is low. Performance of LIBs can be improved through the modification of battery characteristics. The size of solid particles in electrodes can impact the specific energy and the cyclability of batteries. It can improve the amount of lithium content in the electrode which is a vital parameter in capacity and capability of a battery. There exist diferent sources of heat generation in LIBs such as heat produced during electrochemical reactions, internal resistance in battery. The size of electrode's electroactive particles can directly affect the produced heat in battery. It will be shown that the smaller size of solid particle enhance the thermal characteristics of LIBs. Thermal issues such as overheating, temperature maldistribution in the battery, and thermal runaway have confined applications of LIBs. Such thermal challenges reduce the Life cycle of LIBs. As well, they may lead to dangerous conditions such as fire or even explosion in batteries. However, recent advances in fabrication of advanced materials such as graphene and carbon nanotubes with extraordinary thermal conductivity and electrical properties propose new opportunities to enhance their performance. Since experimental works are expensive, our objective is to use computational methods to investigate the thermal issues in LIBS. Dissipation of the heat produced in the battery can improve the cyclability and specific capacity of LIBs. In real applications, packs of LIB consist several battery cells that are used as the power source. Therefore, it is worth to investigate thermal characteristic of battery packs under their cycles of charging/discharging operations at different applied current rates. To remove the produced heat in batteries, they can be surrounded by materials with high thermal conductivity. Parafin wax absorbs high energy since it has a high latent heat. Absorption high amounts of energy occurs at constant temperature without phase change. As well, thermal conductivity of parafin can be magnified with nano-materials such as graphene, CNT, and fullerene to form a nano-composite medium. Improving the thermal conductivity of LIBs increase the heat dissipation from batteries which is a vital issue in systems of battery thermal management. The application of two-dimensional (2D) materials has been on the rise since exfoliation the graphene from bulk graphite. 2D materials are single-layered in an order of nanosizes which show superior thermal, mechanical, and optoelectronic properties. They are potential candidates for energy storage and supply, particularly in lithium ion batteries as electrode material. The high thermal conductivity of graphene and graphene-like materials can play a significant role in thermal management of batteries. However, defects always exist in nano-materials since there is no ideal fabrication process. One of the most important defects in materials are nano-crack which can dramatically weaken the mechanical properties of the materials. Newly synthesized crystalline carbon nitride with the stoichiometry of C3N have attracted many attentions due to its extraordinary mechanical and thermal properties. The other nano-material is phagraphene which shows anisotropic mechanical characteristics which is ideal in production of nanocomposite. It shows ductile fracture behavior when subjected under uniaxial loadings. It is worth to investigate their thermo-mechanical properties in its pristine and defective states. We hope that the findings of our work not only be useful for both experimental and theoretical researches but also help to design advanced electrodes for LIBs. KW - Akkumulator KW - Battery KW - Batterie Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200214-40986 ER - TY - THES A1 - Trümer, André T1 - Calcinierte Tone als Puzzolane der Zukunft - Von den Rohstoffen bis zur Wirkung im Beton N2 - Vor dem Hintergrund einer stetig wachsenden Nachfrage an Beton wie auch ambitionierter Reduktionsziele beim in der Zementproduktion anfallenden CO2 gelten calcinierte Tone als derzeit aussichtsreichste technische Neuerung im Bereich nachhaltiger Bindemittelkonzepte. Unter Ausnutzung ihrer Puzzolanität soll ein erheblicher Teil der Klinkerkomponente im Zement ersetzt werden, wobei der zu ihrer Aktivierung notwendige Energiebedarf vergleichsweise niedrig ist. Wesentliche Vorteile der Tone sind ihre weltweit nahezu unbegrenzte Verfügbarkeit sowie der äußerst geringe rohstoffbedingte CO2-Ausstoß während der Calcinierung. Schwierigkeiten auf dem Weg der Umsetzung bestehen allerdings in der Vielseitigkeit des Systems, welches durch eine hohe Varietät der Rohtone und des daraus folgenden thermischen Verhaltens gekennzeichnet ist. Entsprechend schwierig ist die Übertragbarkeit von Erfahrungen mit bereits etablierten calcinierten Tonen wie dem Metakaolin, der sich durch hohe Reinheit, einen aufwendigen Aufbereitungsprozess und eine entsprechend hohe Reaktivität auszeichnet. Ziel der Arbeit ist es daher, den bereits erlangten Kenntnisstand auf andere, wirtschaftlich relevante Tone zu erweitern und deren Eignung für die Anwendung im Beton herauszuarbeiten. In einem mehrstufigen Arbeitsprogramm wurde untersucht, inwieweit großtechnisch nutzbare Tone aktivierbar sind und welche Eigenschaften sich daraus für Zement und Beton ergeben. Die dabei festgestellte Reihenfolge Kaolinit > Montmorillonit > Illit beschreibt sowohl die Reaktivität der Brennprodukte als auch umgekehrt die Höhe der optimalen Calciniertemperatur. Auch wandelt sich der Charakter der entstandenen Metaphasen in dieser Abfolge von röntgenamorph und hochreaktiv zu glasig und reaktionsträge. Trotz dieser Einordnung konnte selbst mit dem Illit eine mit Steinkohlenflugasche vergleichbare Puzzolanität festgestellt werden. Dies bestätigte sich anschließend in Parameterversuchen, bei denen die Einflüsse von Rohstoffqualität, Calcinierung, Aufbereitung und Zement hinsichtlich der Reaktivitätsausbeute bewertet wurden. Die Bandbreite der erzielbaren Qualitäten ist dabei immens und gipfelt nicht zuletzt in stark unterschiedlichen Wirkungen auf die Festbetoneigenschaften. Hier machte sich vor allem die für Puzzolane typische Porenverfeinerung bemerkbar, sodass viele von Transportvorgängen abhängige Schadmechanismen unterdrückt wurden. Andere Schadex-positionen wie der Frostangriff ließen sich durch Zusatzmaßnahmen wie dem Eintrag von Luftporen beherrschen. Zu bemängeln sind vor allem die schlechte Verarbeitbarkeit kaolinitischer Metatone wie auch die für Puzzolane stark ausgeprägte Carbonatisierungsneigung. Wesentliches Ergebnis der Arbeit ist, dass auch Tone, die bisher als geringwertig bezüglich des Aktivierungspotentials galten, nutzbare puzzolanische Eigenschaften entwickeln können. So kann selbst ein stark verunreinigter Illit-Ton die Qualität von Flugasche erreichen. Mit stei-gendem Tonmineralgehalt sowie bei Präsens thermisch instabilerer Tonminerale wie Mont-morillonit und Kaolinit erweitert sich das Spektrum nutzbarer Puzzolanitäten bis hin zur hochreaktiven Metakaolin-Qualität. Damit lassen sich gute bis sehr gute Betoneigenschaften erzielen, sodass die Leistungsfähigkeit etablierter Kompositmaterialien erreicht wird. Somit sind die Voraussetzungen für eine umfangreiche Nutzung der erheblichen Tonmengen im Zement und Beton gegeben. Entsprechend können Tone einen effektiven Beitrag zu einer gesteigerten Nachhaltigkeit in der Baustoffproduktion weltweit leisten. KW - Beton KW - Ton Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200214-40968 SN - 978-3-00-065011-6 ER - TY - THES A1 - Sung, Younkyoung T1 - Cultural Tourism and Social Resilience: Discourse of Historic Cities in East Germany, the Case of Gotha and Eisenach N2 - This thesis explores how cultural heritage plays a role in the development of urban identity by engaging both actively and passively with memory, i.e. remembering and forgetting. I argue that architectural heritage is a medium where specific cultural and social decisions form its way of presentation, and it reflects the values and interests of the period. By the process of remembering and forgetting, the meanings between inhabitant and object in urban environment are practiced, and the meanings are created. To enable the research in narrative observation, cultural tourism management is chosen as the main research object, which reflects the alteration of interaction between the architectural heritage and urban identity. Identifying the role of heritage management, the definition of social resilience and the prospects of cultural heritage as a means of social resilience are addressed. Case region of the research is East Ger- many, thereby, the study examines the distinct approaches and objectives regarding heritage management under the different political systems along the German reunification process. The framework is based on various theoretical paradigms to investigate the broad research questions: 1) What is the role of historic urban quarters in the revitalisation of East German towns? 2) How was the transition processed by cultural heritage management? 3) How did policy affect residents’ lives? The case study is applied to macro level (city level: Gotha and Eisenach) and micro level study (object level: specific heritage sites), to analyse the performance of selective remembering and making tourist destination through giving significance to specific heritage. By means of site observations, archival research, qualitative inter- views, photographs, and discourse analysis on printed tourism materials, the study demonstrates that certain sites and characteristics of the city enable creating and focusing messages, which aids the social resilience. Combining theory and empirical studies this thesis attempts to widen the academic discussion regarding the practice of remembering and forgetting driven by cultural heritage. The thesis argues for cultural heritage tourism as an element of social resilience and one that embraces the historic and cultural identity of the inhabitants. KW - Stadtmarketing KW - Stadtentwicklung KW - Cultural tourism KW - Resilience KW - City marketing KW - Heritage management KW - Urban identity Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200212-40920 ER - TY - THES A1 - Krtilova, Katerina T1 - Gesten des Denkens. Vilém Flussers Medienphilosophie N2 - In einer systematischen Interpretation von Vilém Flussers Werk schlägt die Arbeit vor, Flussers Ansatz als einen medienphilosophischen zu verstehen, insofern er das „wie“ der medienphilosophischen Fragestellung in den Mittelpunkt rückt. Medien werden nicht erst dann zu einem wesentlichen Bestandteil von Flussers Philosophie, wenn er sie explizit zum Gegenstand seiner Untersuchungen der gegenwärtigen Kultur und Gesellschaft oder historischer Rückblicke macht; Denken vollzieht sich immer in Medien oder medialen Praktiken, es wird nicht nur von ihnen (mit) geprägt – ohne Medien gäbe es kein Denken und umgekehrt verändert sich Philosophie mit den (jeweils) neuen Medien. Ausgehend von Begriffen oder eher Denkfiguren, die neben dem „was“ des jeweils verhandelten Themas auch das „wie“ der Reflexion selbst adressieren, wird der „Umbruch in der Struktur des Denkens“ zugleich als Beschreibung von Medienumbrüchen verstanden – mit dem Fluchtpunkt des Sprungs in das Universum der Komputation – und als Vollzug der gegenwärtigen Veränderung der „Methode des Denkens“. Flussers (Ver)Suche einer Reflexion, die nicht mehr durch das Medium Schrift strukturiert ist, sondern sowohl alten Medien wie dem Bild – bzw. Praktiken des Abbildens, Darstellens, Einbildens usw. – als auch neuen Medien – dem Komputieren – Geltung verschafft, laufen auf eine widersprüchliche Diagnose des neuen Universums der Komputation (anders: der technischen Bilder) hinaus : eine kybermetisch inspirierte Vision der frei modellierbaren Wirklichkeit(en) einerseits und die Dystopie einer Welt, in der Apparaten Denken, Wahrnehmen und Handeln beherrschen andererseits. Die Arbeit zeigt auf, wie Flusser zu dieser Aporie der Medienreflexion – die weit über Flussers Werk hinaus virulent bleibt – gelangt und wie sie, ausgehend von seiner Figur der Geste, im Sinne einer performativen Medienreflexion gelöst werden könnte. KW - Medientheorie KW - Medienphilosophie KW - Medienphilosophie KW - Performativität KW - Vilém Flusser KW - digitale Kultur KW - technische Bilder Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200123-40679 ER - TY - THES A1 - Doering, Chris T1 - Die Informationsarchitektur der kommunalen Energiewende N2 - Die kommunale Energiewende stellt die beteiligten Akteure vor große Herausforderungen: Auf Grundlage strukturierter Daten sollen Maßnahmen
 für eine nachhaltige Infrastruktur geplant und umgesetzt werden. Oft fehlt
 den Beteiligten jedoch das nötige Wissen über die lokalen Potentiale und Rahmenbedingungen—und an geeigneten Methoden der Informationsvermittlung. Gegenstand dieser Arbeit ist die Analyse der Planungsstrukturen und der Entwurf eines visuellen Informationssystems. Mit der vorliegenden Untersuchung wird gezeigt, wie mit Hilfe von Befragungen, partizipativen Visualisierungen, fiktionalen Szenarien und der systematischen Anwendung visueller Variablen eine fundierte Grundlage geschaffen werden kann für eine nutzerorientierte Gestaltung. N2 - The municipal energy transition confronts the actors involved with major challenges: Measures for a sustainable infrastructure should be planned and implemented on the basis of structured data. Often, however, the parties lack the necessary knowledge of the local potentials and conditions—and on suitable methods of presenting information. Subject of this work is the analysis of planning structures and the design of a visual information system. This study shows how surveys, participatory visualizations, fictional scenarios and the systematic use of visual variables can create a sound basis for user-centered design. KW - Design KW - Mediendesign KW - Semiotik KW - Stadtplanung KW - Energiewende KW - Visuelle Semiotik KW - Informationsdesign Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191219-40514 ER - TY - THES A1 - Elrasoul, Riham T1 - Designing Urban National Memory N2 - The study of memory, architecture, and urban space has been the interest ‎of ‎researchers ‎from the diverse fields around the world due to, the significance of dealing ‎with ‎memories ‎especially after the tragedy of the Second World War. Nations in Europe has chosen ‎not to ‎neglect ‎their past, moreover, overcoming it by strengthening the national identity. An ‎approach was clear in ‎the literature, art, further in the way of rebuilding their cities; that mainly ‎has reflected on the ‎value of urban spaces and their role in narrating the country’s national ‎memory. Thanks to this ‎approach, which has supported the post-war European nations to invite ‎to an act of ‎ forgiveness rather than to forget. ‎ On the contrary, memory, in relation to architecture is a form of knowledge has been ‎neglected in Egypt, especially during the previous decades after the declaration of independence ‎from the colonial power, and since 1952 revolution. Recently, a rising debate about Egypt ‎national history and the need to renationalize the Egyptian historical consciousness has rapidly ‎grown up, due to the political transformation has occurred because of the 25th uprising, 2011, ‎which unveiled the power of public spaces in constituting the nation thoughts, especially Tahrir ‎square.‎ At the same time, this has unveiled the results of neglecting the past instead of overcoming it; unveiled a present carries the danger of conflict and repeating previous mistakes. Researchers, historians, politicians, governmental organization, have ‎worked in the purpose of revisiting the historical information, and have tried to document the ‎current transformation of the 25th uprising. There was a public demand for redesigning Tahrir square to reflect the ‎memory of the uprising as a symbol of the power of the public. However, after eight years, those ‎memories have faded as if the 25th uprising has never happened. ‎ Those circumstances are very relevant to the gap between urban design and the art of ‎memory-work, in the scientific field. Few studies in Egypt conducted the concept of memory in ‎relation to urban spaces, however, the matter requires more attention, to associate the need for renationalizing Egypt ‎memory, with viewing urban space as a mean of narrating the country’s national memory and ‎reflecting the citizens' current thoughts, as a try of nearing the distances between ‎competing ‎narratives. Therefore, the research aims at developing a methodological framework that should ‎contribute to renationalizing memory through urban space. Further, benefiting from the German experience by investigating lessons to learn. That is based on the hypothesis that, although there is no fixed formula for all countries to renationalize the historical ‎consciousness of memory through urban spaces, lessons to be learned from Germany experience ‎could be a driving dimension when designing Egyptian urban spaces with a concept of memory ‎as an essential factor. To guide the validity of the study’s hypothesis, a set of research questions are thus ‎formulated: Starting from why memory is an essential factor when designing urban spaces? ‎Regarding Egypt national memory, how it was constituted through history and how to read its ‎representation on urban spaces? Also, the study quests the means of nationalizing memory ‎through urban spaces? And What are the learned lessons from the German experience?‎ The study tries to answer those questions. Via an inductive ‎analytical ‎methodology ‎which ‎moves from the gap of knowledge and from a particular situation ‎in Egypt, to study the German ‎experience in renationalizing the concept of memory through urban spaces.‎ ‎ Within the scope of the study, exploring Egypt prevailing narratives and the inherited ‎concepts which influenced the national memory is essential. Moreover, the research develops ‎analytical political psychosocial model that could help reading memories in urban spaces, ‎memory’s actors, and memory influences. To validate this model, case studies are analysed in ‎light of the concluded aspects. Consequently, the expected result is to infer broad general ‎learned ‎lessons for the Egyptian case. ‎ Research findings and conclusions answer the research questions, interpret literature ‎review, recommend some guide points to three target groups: first, practice field; to encourage ‎designers to value the national and collective memories when designing urban spaces. Second, to ‎ask policymakers to take the public participation into consideration, when taking decisions related to urban ‎development. Third, the thesis recommends future researches of urban memory that connect ‎theoretical information with the practice field. ‎ Finally, enhancing the memory-work in relation to the national narrative, conveying a meaningful message, when ‎designing urban spaces could encourage citizens to learn, to interact, and to dissolve boundaries ‎between the competing narratives in post-conflict societies.‎ KW - Erinnerung KW - Denkmal KW - Kulturerbe KW - Ägypten KW - Designing Urban National Memory KW - Reading Urban National Memory KW - Prevailing/ Competing Narratives KW - Post-Conflict society KW - Learned Lessons Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191212-40489 ER - TY - THES A1 - Tasch, Alexander T1 - Reaktive Cu-Fe-Al-Mn-Oxidkeramiken für die Sauerstoffseparation aus der Luft N2 - Die Gase Sauerstoff und Stickstoff werden für eine Vielzahl an technischen, industriellen, biologischen und medizinischen Einsatzzwecken benötigt. So liegen Anwendungsgebiete dieser Gase neben der klassischen metallverarbeitenden und der chemischen Industrie bei Sauerstoff vor allem in der Medizin, Verbrennungs- und Kläranlagenoptimierung sowie der Fischzucht und bei Stickstoff als Schutz- beziehungsweise Inertgas in der Kunststoffindustrie, der Luft- und Raumfahrt sowie dem Brandschutz. Die Bereitstellung der Gase Sauerstoff und Stickstoff wird nahezu ausschließlich durch die Abtrennung aus der Umgebungsluft realisiert, welche aus ca. 78 Vol.-% Stickstoff, 21 Vol.-% Sauerstoff und 1 Vol.-% Spurengasen (Ar, CO2, Ne, He, ...) besteht. Am Markt etablierte Verfahren der Luftzerlegung sind das Linde-, das PSA- (pressure swing adsorption/Druckwechseladsorption) oder verschiedene Membran-Verfahren. Hierdurch werden die benötigten Gase entweder direkt vor Ort beim Verbraucher erzeugt (PSA- und Polymer-Membranverfahren: geringe Reinheiten) oder zentral in großen Anlagen hergestellt (Linde-Verfahren: hohe Reinheiten) und anschließend zum Verbraucher in Form von Flaschen- oder Tankgasen geliefert (Tansportkosten). Für kleinere Verbraucher mit hohen Ansprüchen an die Reinheit des benötigten Sauerstoffs beziehungsweise Stickstoffs ergibt sich nur die Möglichkeit, die Gase als kostenintensive Transportgase zentraler Gaseversorger zu beziehen und sich somit in eine Abhängigkeit (Lieferverträge, Flaschen-/Tankmieten, ...) zu diesen zu begeben sowie eine eigene Lagerhaltung für die benötigten Gase (Mehraufwand, Lagerkosten, Platzbedarf) zu betreiben. Ziel dieser Arbeit ist es, keramische Material-Systeme auf Basis chemischer Hochtemperatur-Reaktionen als Reaktive Oxidkeramiken zu entwickeln und diese hinsichtlich eines möglichen Einsatzes für die Sauerstoffseparation in neuartigen Luftzerlegungsanlagen zu untersuchen. Derartige Anlagen sollen in ihrem Prinzip an die regenerative Sauerstoffseparation angelehnt sein und in ihren Reaktoren die Reaktiven Oxidkeramiken als Festbett-Material abwechselnd mit Luft be- und Vakuum oder O2-armen Atmosphären entladen. Die Verwendung Reaktiver Oxidkeramiken, welche im Vergleich zu den bisherigen Materialien höhere Sauerstoffaustauschmengen und -raten bei gleichzeitig hoher Lebensdauer und Korrosionsbeständigkeit sowie relativ einfacher Handhabe aufweisen würden, soll ein Schritt in Richtung einer effizienten alternativen Luftzerlegungstechnologie sein. Mit den Reaktiven Oxidkeramiken in einer Luftzerlegungsanlage sollte es im besten Fall möglich sein, in kleinen Anlagen sehr reinen Sauerstoff und zugleich sauerstofffreies Inertgas zu erzeugen sowie eine Sauerstoffan- oder -abreicherung von Luft, Prozess- oder Abgasen zu generieren. Somit besäße eine solche, auf Reaktiven Oxidkeramiken basierende Technologie sehr weit gefächerte Einsatzgebiete und demzufolge ein enormes wirtschaftliches Potential. KW - Luftzerlegung KW - Sauerstoff KW - Stickstoff KW - Inertgas KW - Oxidkeramik KW - Sauerstoffseparation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191209-40414 ER - TY - THES A1 - Hossain, Md Naim T1 - Isogeometric analysis based on Geometry Independent Field approximaTion (GIFT) and Polynomial Splines over Hierarchical T-meshes N2 - This thesis addresses an adaptive higher-order method based on a Geometry Independent Field approximatTion(GIFT) of polynomial/rationals plines over hierarchical T-meshes(PHT/RHT-splines). In isogeometric analysis, basis functions used for constructing geometric models in computer-aided design(CAD) are also employed to discretize the partial differential equations(PDEs) for numerical analysis. Non-uniform rational B-Splines(NURBS) are the most commonly used basis functions in CAD. However, they may not be ideal for numerical analysis where local refinement is required. The alternative method GIFT deploys different splines for geometry and numerical analysis. NURBS are utilized for the geometry representation, while for the field solution, PHT/RHT-splines are used. PHT-splines not only inherit the useful properties of B-splines and NURBS, but also possess the capabilities of local refinement and hierarchical structure. The smooth basis function properties of PHT-splines make them suitable for analysis purposes. While most problems considered in isogeometric analysis can be solved efficiently when the solution is smooth, many non-trivial problems have rough solutions. For example, this can be caused by the presence of re-entrant corners in the domain. For such problems, a tensor-product basis (as in the case of NURBS) is less suitable for resolving the singularities that appear since refinement propagates throughout the computational domain. Hierarchical bases and local refinement (as in the case of PHT-splines) allow for a more efficient way to resolve these singularities by adding more degrees of freedom where they are necessary. In order to drive the adaptive refinement, an efficient recovery-based error estimator is proposed in this thesis. The estimator produces a recovery solution which is a more accurate approximation than the computed numerical solution. Several two- and three-dimensional numerical investigations with PHT-splines of higher order and continuity prove that the proposed method is capable of obtaining results with higher accuracy, better convergence, fewer degrees of freedom and less computational cost than NURBS for smooth solution problems. The adaptive GIFT method utilizing PHT-splines with the recovery-based error estimator is used for solutions with discontinuities or singularities where adaptive local refinement in particular domains of interest achieves higher accuracy with fewer degrees of freedom. This method also proves that it can handle complicated multi-patch domains for two- and three-dimensional problems outperforming uniform refinement in terms of degrees of freedom and computational cost. T2 - Die isogeometrische Analysis basierend auf der geometrieunabhängigen Feldnäherung (GIFT)und polynomialen Splines über hierarchischen T-Netzen KW - Finite-Elemente-Methode KW - Isogeometrc Analysis KW - Geometry Independent Field Approximation KW - Polynomial Splines over Hierarchical T-meshes KW - Recovery Based Error Estimator Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191129-40376 ER - TY - THES A1 - Chen, Na T1 - A Balance between Ideals and Reality — Establishing and Evaluating a Resilient City Indicator System for Central Chinese Cities N2 - Recent years have seen a gradual shift in focus of international policies from a national and regional perspective to that of cities, a shift which is closely related to the rapid urbanization of developing countries. As revealed in the 2011 Revision of the World Urbanization Prospects published by the United Nations, 51% of the global population (approximately 3.6 billion people) lives in cities. The report predicts that by 2050, the world’s urban population will increase by 2.3 billion, making up 68% of the population. The growth of urbanization in the next few decades is expected to primarily come from developing countries, one third of which will be in China and India. With rapid urbanization and the ongoing growth of mega cities, cities must become increasingly resilient and intelligent to cope with numerous challenges and crises like droughts and floods arising from extreme climate, destruction brought by severe natural disasters, and aggregated social contradictions resulting from economic crises. All cities face the urban development dynamics and uncertainties arising from these problems. Under such circumstances, cities are considered the critical path from crisis to prosperity, so scholars and organizations have proposed the construction of “resilient cities.” On the one hand, this theory emphasizes cities’ defenses and buffering capacity against disasters, crises and uncertainties, as well as recovery after destruction; on the other hand, it highlights the learning capacity of urban systems, identification of opportunities amid challenges, and maintenance of development vitality. Some scholars even believe that urban resilience is a powerful supplement to sustainable development. Hence, resilience assessment has become the latest and most important perspective for evaluating the development and crisis defense capacity of cities. Rather than a general abstract concept, urban resilience is a comprehensive measurement of a city’s level of development. The dynamic development of problems is reflected through quantitative indicators and appraisal systems not only from the perspective of academic research, but also governmental policy, so as to scientifically guide development, and measure and compare cities’ development levels. Although international scholars have proposed quantitative methods for urban resilience assessment, they are however insufficiently systematic and regionally adaptive for China’s current urban development needs. On the basis of comparative study on European and North American resilient city theories, therefore, this paper puts forwards a theoretical framework for resilient city systems consistent with China’s national conditions in light of economic development pressure, natural resource depletion, pollution, and other salient development crises in China. The key factors influencing urban resilience are taken into full consideration; expert appraisal is conducted based on the Delphi Method and the analytic hierarchy process (AHP) to design an extensible and updatable resilient city evaluation system which is sufficiently systematic, geographically adaptable, and sustainable for China’s current urban development needs. Finally, Changsha is taken as the main case for empirical study on comprehensive evaluation of similar cities in Central China to improve the indicator system. T2 - Ein Gleichgewicht zwischen Ideal und Realität - Etablierung und Evaluation eines Indikatorensystems für resiliente Städte in Zentralchina KW - Stadtplanung KW - resilient city KW - urban planning KW - Zentralchina Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191121-40309 ER - TY - THES A1 - Sidjimovska, Ivana T1 - Recounting Skopje. Skopje 2014: Symbolic and Citizens' Narratives N2 - Focusing on the neoliberal symbolic urban reconstruction of the Macedonian capital, known as “Skopje 2014”, the PhD work deals with urban space production through storytelling. Embracing the criticism put forward in the political, cultural and social debates that have spun around Skopje’s reconstruction, the artistic-based research sought to relate and analyze the symbolic narratives of “Skopje 2014” and the vernacular and civic narratives of Skopje and locate overlapping, divergent, complementary or conflictual aspects of their respective narrative structures. Informed by subjective citizens’ stories and experiences of the urban as well as binaural sonic observations of the city, the research findings were presented in the form of an interactive audio guided walk through the city. The thesis is organized in three chapters, preceded by an INTRODUCTION and followed by a CONCLUSION. CHAPTER ONE sets the theoretical context, presents the case study “Skopje 2014”, and discusses the research design. The audio guided walk is presented in CHAPTER TWO. Its content consists of five tracks, or subchapters, conceptualized and named as five different aspects of the city: THE MODERNIST CITY, THE FEMALE CITY, THE MEMORY CITY, THE POSTCOMMUNIST CITY and THE TOURIST CITY, according to the discourses related to these tracks. CHAPTER THREE, the EPILOGUE, is the final discussion of the research project, in which several meta-conclusions are drawn. KW - Stadtumbau KW - Skopje 2014 KW - neoliberal urban reconstruction KW - urban narratives KW - artistic research KW - art in public space KW - audio walk KW - Audioführung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191119-40256 ER -