TY - JOUR A1 - Sierek, Karl T1 - "Architektur in Bewegung" : zur Enträumlichung urbaner Orte durch Medien- und Lichtfassaden N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/13 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080729-13846 ER - TY - JOUR A1 - Wirth, Hermann T1 - "Auch Schandmale sind denkmalwert" : zum Umgang mit baulich-räumlichen Sachzeugen technischer und technologischer Fehlorientierung N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,3-4/383-385 KW - Architektur KW - Technologie KW - Denkmal KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11866 ER - TY - JOUR A1 - Schulze, Ingrid T1 - "Burg" und Bauhaus : zum Schaffen von Paul Thiersch, Erwin Hahs und Gustav Weidanz N2 - Wissenschaftliches Kolloquium vom 5. bis 7. Juli 1983 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Das Bauhauserbe und die gegenwärtige Entwicklung der Architektur : zum 100. Geburtstag von Walter Gropius' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 29.1983,5-6/505-510 KW - Thiersch KW - Paul KW - Hahs KW - Erwin KW - Weidanz KW - Gustav KW - Bauhaus-Kolloquium KW - Weimar KW - 1983 Y1 - 1983 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-9397 ER - TY - JOUR A1 - Schwarz, Ullrich T1 - "Das echt-absolut Reelle" (Novalis) : Überlegungen zu einer reflexiven ästhetischen Moderne N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/09 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080729-13805 ER - TY - JOUR A1 - Simon-Ritz, Frank T1 - "Kultur ist Reichtum an Problemen": Wie sich der Kultur-Begriff der UNESCO an Egon Friedell annäherte JF - Palmbaum: Literarisches Journal aus Thüringen N2 - Der in H. 1/2023 erschienene Essay führt Gedanken einer in H. 1/2022 des "Palmbaum" erschienene Betrachtung (https://doi.org/10.25643/bauhaus-universitaet.4628) weiter. Im Zentrum stehen dabei die Bemühungen der UNESCO um das immaterielle Kulturerbe. KW - UNESCO KW - Kulturerbe Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230411-49524 VL - 2023 IS - Heft 1 PB - Quartus Verlag CY - Bucha bei Jena ER - TY - JOUR A1 - Köb, Roland A1 - Pollak, Sabine T1 - "LUSTration" - operative Instrumente gegen den Mythos Fortschritt N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,3-4/285-288 KW - Architektur KW - Technologie KW - Fortschritt KW - Fiktion KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11898 ER - TY - JOUR A1 - Brake, Klaus T1 - "Neue Technologien" - Auswirkungen im Bereich Arbeit, Sozialstruktur und Umwelt in ihren Einflüssen auf die Territorialstruktur N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 36.1990,1-3/69-72 KW - Regionalstruktur KW - Technik KW - Bauhaus-Kolloquium KW - Weimar KW - 1989 Y1 - 1990 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10611 ER - TY - JOUR A1 - Baltzer, Nanni T1 - "No dobbiamo creare (...) un'arte dei nostri tempi, un'arte fascista" (Mussolini) : Fotografie und Architektur im Faschismus N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,4/174-186 KW - Faschismus KW - Architektur KW - Photographie KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080304-13320 ER - TY - JOUR A1 - Pratschke, Margarete T1 - "Overlapping Windows" : Architektonische Raumkonzepte als Vorbilder des digitalen Bildraums grafischer Benutzeroberflächen N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/29 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080814-14025 ER - TY - JOUR A1 - Weckherlin, Gernot T1 - "This book is not literature - it is a practical manual ..." : diskursive und nicht-diskursive Praktiken in der Architektur N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,4/46-58 KW - Architekturtheorie KW - Diskurs KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080304-13397 ER - TY - JOUR A1 - Wirth, Hermann T1 - "Wie das Regime, so seine Bauten" : die Koinzidenz von Machtstruktur und Baustruktur N2 - Wissenschaftliches Kolloquium vom 18. bis 21. Juni 1992 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Architektur und Macht' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 39.1993,1-2/119-121 KW - Architektur KW - Macht KW - Bauhaus-Kolloquium KW - Weimar KW - 1992 Y1 - 1993 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11415 ER - TY - JOUR A1 - Hartmann, Frank T1 - 'Unter die Haut der Welt'. Philosophical Toys, Metatechnik und transanthropologischer Raum JF - Zeitschrift für Medien- und Kulturforschung N2 - Nach dem aufgeregten Palaver um den Computer als 'Medium' und die akademische Begleitrhetorik zum Internet wird erneut die Frage nach der Leistung von Medienphilosophie gestellt - in diesem Beitrag als medienanthropologische Vergewisserung: welche technischen Überschreitungen definieren das Neue unserer Lage? KW - Philosophie KW - Technikphilosophie KW - Medienphilosophie Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140819-22781 IS - 2010,2 SP - 95 EP - 110 ER - TY - JOUR A1 - Siegert, Bernhard T1 - (Nicht) Am Ort : zum Raster als Kulturtechnik N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' KW - Architektur KW - Stadt KW - Raster KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080227-13049 ER - TY - JOUR A1 - Krebs, F. A1 - Brück, E. T1 - 3D-Computergrafik und -animation als Instrument der Visualisierung im Bereich Entwurf und Denkmalpflege N2 - Seit mehreren Jahren wird im Fachbereich Gestaltung, Studiengang Innenarchitektur 3D-Computergrafik und -animation in Lehrveranstaltungen ausgebildet und in Projekt- und Diplomarbeiten als Darstellungsmedium angewandt. Eine besondere Herausforderung stellen dabei die 3D-Visualisierungen von historischen Gebäuden dar. Mit den beiden nachfolgenden Beispielen soll der Einsatz und die curricularen Verknüpfung der CA-Technologie mit Studienarbeiten und Projekten zum Thema >Denkmalpflege< aufgezeigt werden. Rekonstruktion und Visualisierung des ehemaligen >Jagdschlosses Platte< bei Wiesbaden. Mit Unterstützung einer Kunsthistorikerin wurde in einer Studienarbeit das im Krieg zerstörte ehemalige Jagdschloß im Computer nachgebildet. Neben der Darstellung des Gebäudeäußeren und des zentralen Innenbereiches wurde eine Animation über die Triangulierung der klassizistischen Geometrie erstellt. Umnutzung historischer Bausubstanz am Beispiel der ehemaligen Klostersanlage >Schiffenberg< bei Gießen. Im Rahmen einer Projektarbeit wurden mehrer Konzepte entwickelt, Entwürfe erstellt und mittels Computeranimationen öffentlich präsentiert. In Kooperation mit dem Studiengang Fernsehtechnik (FH-Wiesbaden) wurde von zwei Studenten eine Videodokumentation über den gesamten Projektverlauf erstellt. Neben dem Aufzeigen der Arbeitsprozesse und dem Vorstellen des Lehrkonzeptes für die curriculare Einbindung der CA-Technologie werden aktuelle Studienergebnisse anhand von Videoprojektionen vorgestellt. KW - Architektur KW - Visualisierung KW - Dreidimensionales Modell KW - Computergraphik Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5235 ER - TY - JOUR A1 - Grönwald, Bernd T1 - 40 Jahre Städtebau- und Architekturentwicklung in der DDR N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 36.1990,1-3/17-20 KW - Deutschland KW - Städtebau KW - Architektur KW - Bauhaus-Kolloquium KW - Weimar KW - 1989 Y1 - 1990 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10960 ER - TY - JOUR A1 - Artus, Mathias A1 - Alabassy, Mohamed Said Helmy A1 - Koch, Christian T1 - A BIM Based Framework for Damage Segmentation, Modeling, and Visualization Using IFC JF - Applied Sciences N2 - Paper-based data acquisition and manual transfer between incompatible software or data formats during inspections of bridges, as done currently, are time-consuming, error-prone, cumbersome, and lead to information loss. A fully digitized workflow using open data formats would reduce data loss, efforts, and the costs of future inspections. On the one hand, existing studies proposed methods to automatize data acquisition and visualization for inspections. These studies lack an open standard to make the gathered data available for other processes. On the other hand, several studies discuss data structures for exchanging damage information among different stakeholders. However, those studies do not cover the process of automatic data acquisition and transfer. This study focuses on a framework that incorporates automatic damage data acquisition, transfer, and a damage information model for data exchange. This enables inspectors to use damage data for subsequent analyses and simulations. The proposed framework shows the potentials for a comprehensive damage information model and related (semi-)automatic data acquisition and processing. KW - Building Information Modeling KW - Brücke KW - Inspektion KW - Maschinelles Lernen KW - Bildverarbeitung KW - Building Information Modeling KW - Bridge KW - Inspection KW - Damage Segmentation KW - Machine Learning KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220314-46059 UR - https://www.mdpi.com/2076-3417/12/6/2772 VL - 2022 IS - volume 12, issue 6, article 2772 SP - 1 EP - 24 PB - MDPI CY - Basel ER - TY - JOUR A1 - Noh, Jung-Hwi A1 - Park, Jong-Heon T1 - A Calculation of Initial Cable Force for Ko-Ha Grand Bridge N2 - The primary objective of initial shape analysis of a cable stayed bridge is to calculate initial installation cable tension forces and to evaluate fabrication camber of main span and pylon providing the final longitudinal profile of the bridge at the end of construction. In addition, the initial cable forces depending on the alternation of the bridge’s shape can be obtained from the analysis, and will be used to provide construction safety during construction. In this research, we conducted numerical experiments for initial shape of Ko-ha bridge, which will be constructed in the near future, using three different typical methods such as continuous beam method, linear truss method, and IIMF (Introducing Initial Member Force) method KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Hängebrücke KW - cable stayed bridge KW - cable force KW - initial shape KW - initial equilibrium state Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2459 ER - TY - JOUR A1 - Kavrakov, Igor A1 - Legatiuk, Dmitrii A1 - Gürlebeck, Klaus A1 - Morgenthal, Guido T1 - A categorical perspective towards aerodynamic models for aeroelastic analyses of bridge decks JF - Royal Society Open Science N2 - Reliable modelling in structural engineering is crucial for the serviceability and safety of structures. A huge variety of aerodynamic models for aeroelastic analyses of bridges poses natural questions on their complexity and thus, quality. Moreover, a direct comparison of aerodynamic models is typically either not possible or senseless, as the models can be based on very different physical assumptions. Therefore, to address the question of principal comparability and complexity of models, a more abstract approach, accounting for the effect of basic physical assumptions, is necessary. This paper presents an application of a recently introduced category theory-based modelling approach to a diverse set of models from bridge aerodynamics. Initially, the categorical approach is extended to allow an adequate description of aerodynamic models. Complexity of the selected aerodynamic models is evaluated, based on which model comparability is established. Finally, the utility of the approach for model comparison and characterisation is demonstrated on an illustrative example from bridge aeroelasticity. The outcome of this study is intended to serve as an alternative framework for model comparison and impact future model assessment studies of mathematical models for engineering applications. KW - Brücke KW - Aerodynamik KW - Aeroelastizität KW - bridge KW - abstract modelling KW - category theory KW - bridge aerodynamics KW - bridge aeroelasticity KW - aerodynamic models KW - model complexity KW - OA-Publikationsfonds2019 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190314-38656 UR - https://royalsocietypublishing.org/doi/10.1098/rsos.181848 IS - Volume 6, Issue 3 ER - TY - JOUR A1 - Vaarmann, Otu T1 - A class of rapidly convergent interative Methods for Problems in mathematical Modelling N2 - Methods with the convergence order p 2 (Newton`s, tangent hyperbolas, tangent parabolas etc.) and their approximate variants are studied. Conditions are presented under which the approximate variants preserve their convergence rate intrinsic to these methods and some computational aspects (possibilities to organize parallel computation, globalization of a method, the solution of the linear equations versus the matrix inversion at every iteration etc.) are discussed. Polyalgorithmic computational schemes (hybrid methods) combining the best features of various methods are developed and possibilities of their application to numerical solution of two-point boundary-value problem in ordinary differential equations and decomposition-coordination problem in convex programming are analyzed. KW - Mathematisches Modell KW - Dialogsystem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5223 ER - TY - JOUR A1 - Abbaspour-Gilandeh, Yousef A1 - Molaee, Amir A1 - Sabzi, Sajad A1 - Nabipour, Narjes A1 - Shamshirband, Shahaboddin A1 - Mosavi, Amir T1 - A Combined Method of Image Processing and Artificial Neural Network for the Identification of 13 Iranian Rice Cultivars JF - agronomy N2 - Due to the importance of identifying crop cultivars, the advancement of accurate assessment of cultivars is considered essential. The existing methods for identifying rice cultivars are mainly time-consuming, costly, and destructive. Therefore, the development of novel methods is highly beneficial. The aim of the present research is to classify common rice cultivars in Iran based on color, morphologic, and texture properties using artificial intelligence (AI) methods. In doing so, digital images of 13 rice cultivars in Iran in three forms of paddy, brown, and white are analyzed through pre-processing and segmentation of using MATLAB. Ninety-two specificities, including 60 color, 14 morphologic, and 18 texture properties, were identified for each rice cultivar. In the next step, the normal distribution of data was evaluated, and the possibility of observing a significant difference between all specificities of cultivars was studied using variance analysis. In addition, the least significant difference (LSD) test was performed to obtain a more accurate comparison between cultivars. To reduce data dimensions and focus on the most effective components, principal component analysis (PCA) was employed. Accordingly, the accuracy of rice cultivar separations was calculated for paddy, brown rice, and white rice using discriminant analysis (DA), which was 89.2%, 87.7%, and 83.1%, respectively. To identify and classify the desired cultivars, a multilayered perceptron neural network was implemented based on the most effective components. The results showed 100% accuracy of the network in identifying and classifying all mentioned rice cultivars. Hence, it is concluded that the integrated method of image processing and pattern recognition methods, such as statistical classification and artificial neural networks, can be used for identifying and classification of rice cultivars. KW - Maschinelles Lernen KW - Machine learning KW - food informatics KW - big data KW - artificial neural networks KW - artificial intelligence KW - image processing KW - rice Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200123-40695 UR - https://www.mdpi.com/2073-4395/10/1/117 VL - 2020 IS - Volume 10, Issue 1, 117 PB - MDPI ER - TY - JOUR A1 - Harirchian, Ehsan A1 - Isik, Ercan T1 - A Comparative Probabilistic Seismic Hazard Analysis for Eastern Turkey (Bitlis) Based on Updated Hazard Map and Its Effect on Regular RC Structures JF - Buildings N2 - Determining the earthquake hazard of any settlement is one of the primary studies for reducing earthquake damage. Therefore, earthquake hazard maps used for this purpose must be renewed over time. Turkey Earthquake Hazard Map has been used instead of Turkey Earthquake Zones Map since 2019. A probabilistic seismic hazard was performed by using these last two maps and different attenuation relationships for Bitlis Province (Eastern Turkey) were located in the Lake Van Basin, which has a high seismic risk. The earthquake parameters were determined by considering all districts and neighborhoods in the province. Probabilistic seismic hazard analyses were carried out for these settlements using seismic sources and four different attenuation relationships. The obtained values are compared with the design spectrum stated in the last two earthquake maps. Significant differences exist between the design spectrum obtained according to the different exceedance probabilities. In this study, adaptive pushover analyses of sample-reinforced concrete buildings were performed using the design ground motion level. Structural analyses were carried out using three different design spectra, as given in the last two seismic design codes and the mean spectrum obtained from attenuation relationships. Different design spectra significantly change the target displacements predicted for the performance levels of the buildings. KW - Erbeben KW - Schwellenwert KW - Seismic risk KW - Adaptive Pushover KW - Design Spectra KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221028-47283 UR - https://www.mdpi.com/2075-5309/12/10/1573 VL - 2022 IS - Volume 12, issue 10, article 1573 SP - 1 EP - 19 PB - MDPI CY - Basel ER - TY - JOUR A1 - Harirchian, Ehsan A1 - Jadhav, Kirti A1 - Mohammad, Kifaytullah A1 - Aghakouchaki Hosseini, Seyed Ehsan A1 - Lahmer, Tom T1 - A Comparative Study of MCDM Methods Integrated with Rapid Visual Seismic Vulnerability Assessment of Existing RC Structures JF - Applied Sciences N2 - Recently, the demand for residence and usage of urban infrastructure has been increased, thereby resulting in the elevation of risk levels of human lives over natural calamities. The occupancy demand has rapidly increased the construction rate, whereas the inadequate design of structures prone to more vulnerability. Buildings constructed before the development of seismic codes have an additional susceptibility to earthquake vibrations. The structural collapse causes an economic loss as well as setbacks for human lives. An application of different theoretical methods to analyze the structural behavior is expensive and time-consuming. Therefore, introducing a rapid vulnerability assessment method to check structural performances is necessary for future developments. The process, as mentioned earlier, is known as Rapid Visual Screening (RVS). This technique has been generated to identify, inventory, and screen structures that are potentially hazardous. Sometimes, poor construction quality does not provide some of the required parameters; in this case, the RVS process turns into a tedious scenario. Hence, to tackle such a situation, multiple-criteria decision-making (MCDM) methods for the seismic vulnerability assessment opens a new gateway. The different parameters required by RVS can be taken in MCDM. MCDM evaluates multiple conflicting criteria in decision making in several fields. This paper has aimed to bridge the gap between RVS and MCDM. Furthermore, to define the correlation between these techniques, implementation of the methodologies from Indian, Turkish, and Federal Emergency Management Agency (FEMA) codes has been done. The effects of seismic vulnerability of structures have been observed and compared. KW - Erdbebensicherheit KW - damaged buildings KW - earthquake safety assessment KW - soft computing techniques KW - rapid visual screening KW - seismic risk estimation KW - Multi-criteria decision making KW - vulnerability assessment KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200918-42360 UR - https://www.mdpi.com/2076-3417/10/18/6411/htm VL - 2020 IS - Volume 10, issue 18, article 6411 PB - MDPI CY - Basel ER - TY - JOUR A1 - Beer, Daniel G. A1 - Firmenich, Berthold A1 - Richter, Torsten T1 - A Concept for CAD Systems with Persistent Versioned Data Models N2 - The synchronous distributed processing of common source code in the software development process is supported by well proven methods. The planning process has similarities with the software development process. However, there are no consistent and similarly successful methods for applications in construction projects. A new approach is proposed in this contribution. KW - Produktmodell KW - Bautechnik KW - Forschungskooperation KW - Versionsverwaltung KW - CAD Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2046 ER - TY - JOUR A1 - Zhuang, Xiaoying A1 - Huang, Runqiu A1 - Liang, Chao A1 - Rabczuk, Timon T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage JF - Mathematical Problems in Engineering N2 - Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared. KW - Energiespeicherung KW - Druckluft KW - Kaverne KW - Modellierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170428-31726 ER - TY - JOUR A1 - Alalade, Muyiwa A1 - Reichert, Ina A1 - Köhn, Daniel A1 - Wuttke, Frank A1 - Lahmer, Tom ED - Qu, Chunxu ED - Gao, Chunxu ED - Zhang, Rui ED - Jia, Ziguang ED - Li, Jiaxiang T1 - A Cyclic Multi-Stage Implementation of the Full-Waveform Inversion for the Identification of Anomalies in Dams JF - Infrastructures N2 - For the safe and efficient operation of dams, frequent monitoring and maintenance are required. These are usually expensive, time consuming, and cumbersome. To alleviate these issues, we propose applying a wave-based scheme for the location and quantification of damages in dams. To obtain high-resolution “interpretable” images of the damaged regions, we drew inspiration from non-linear full-multigrid methods for inverse problems and applied a new cyclic multi-stage full-waveform inversion (FWI) scheme. Our approach is less susceptible to the stability issues faced by the standard FWI scheme when dealing with ill-posed problems. In this paper, we first selected an optimal acquisition setup and then applied synthetic data to demonstrate the capability of our approach in identifying a series of anomalies in dams by a mixture of reflection and transmission tomography. The results had sufficient robustness, showing the prospects of application in the field of non-destructive testing of dams. KW - Damm KW - Defekt KW - inverse analysis KW - damage identification KW - full-waveform inversion KW - dams KW - wave propagation KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221201-48396 UR - https://www.mdpi.com/2412-3811/7/12/161 VL - 2022 IS - Volume 7, issue 12, article 161 PB - MDPI CY - Basel ER - TY - JOUR A1 - Ma, Zhiliang A1 - Qin, Liang T1 - A Framework of Management Information System for Construction Projects N2 - A comprehensive framework of information management system for construction projects in China has been established through extensive literature survey and field investigation. It utilizes the potential information technologies and covers the practical management patterns as well as the major aspects of construction project management. It can be used to guide and evaluate the design of the information management systems for construction projects in order to make the system to be applicable to a wide variety of construction projects and survive the changes in project management. KW - Mehragentensystem KW - Lernendes System KW - Managementinformationssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2126 ER - TY - JOUR A1 - Völske, Michael A1 - Gollub, Tim A1 - Hagen, Matthias A1 - Stein, Benno T1 - A keyquery-based classification system for CORE JF - D-Lib Magazine N2 - We apply keyquery-based taxonomy composition to compute a classification system for the CORE dataset, a shared crawl of about 850,000 scientific papers. Keyquery-based taxonomy composition can be understood as a two-phase hierarchical document clustering technique that utilizes search queries as cluster labels: In a first phase, the document collection is indexed by a reference search engine, and the documents are tagged with the search queries they are relevant—for their so-called keyqueries. In a second phase, a hierarchical clustering is formed from the keyqueries within an iterative process. We use the explicit topic model ESA as document retrieval model in order to index the CORE dataset in the reference search engine. Under the ESA retrieval model, documents are represented as vectors of similarities to Wikipedia articles; a methodology proven to be advantageous for text categorization tasks. Our paper presents the generated taxonomy and reports on quantitative properties such as document coverage and processing requirements. KW - Massendaten KW - Taxonomie KW - Dynamic Taxonomy Composition, Keyquery, Classification Systems, Reverted Index, Big Data Problem Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170426-31662 ER - TY - JOUR A1 - Harirchian, Ehsan A1 - Kumari, Vandana A1 - Jadhav, Kirti A1 - Raj Das, Rohan A1 - Rasulzade, Shahla A1 - Lahmer, Tom T1 - A Machine Learning Framework for Assessing Seismic Hazard Safety of Reinforced Concrete Buildings JF - Applied Sciences N2 - Although averting a seismic disturbance and its physical, social, and economic disruption is practically impossible, using the advancements in computational science and numerical modeling shall equip humanity to predict its severity, understand the outcomes, and equip for post-disaster management. Many buildings exist amidst the developed metropolitan areas, which are senile and still in service. These buildings were also designed before establishing national seismic codes or without the introduction of construction regulations. In that case, risk reduction is significant for developing alternatives and designing suitable models to enhance the existing structure’s performance. Such models will be able to classify risks and casualties related to possible earthquakes through emergency preparation. Thus, it is crucial to recognize structures that are susceptible to earthquake vibrations and need to be prioritized for retrofitting. However, each building’s behavior under seismic actions cannot be studied through performing structural analysis, as it might be unrealistic because of the rigorous computations, long period, and substantial expenditure. Therefore, it calls for a simple, reliable, and accurate process known as Rapid Visual Screening (RVS), which serves as a primary screening platform, including an optimum number of seismic parameters and predetermined performance damage conditions for structures. In this study, the damage classification technique was studied, and the efficacy of the Machine Learning (ML) method in damage prediction via a Support Vector Machine (SVM) model was explored. The ML model is trained and tested separately on damage data from four different earthquakes, namely Ecuador, Haiti, Nepal, and South Korea. Each dataset consists of varying numbers of input data and eight performance modifiers. Based on the study and the results, the ML model using SVM classifies the given input data into the belonging classes and accomplishes the performance on hazard safety evaluation of buildings. KW - Erdbeben KW - Vulnerability KW - Earthquake KW - damaged buildings KW - earthquake safety assessment KW - soft computing techniques KW - rapid visual screening KW - Machine Learning KW - vulnerability assessment KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201022-42744 UR - https://www.mdpi.com/2076-3417/10/20/7153 VL - 2020 IS - Volume 10, issue 20, article 7153 PB - MDPI CY - Basel ER - TY - JOUR A1 - Karimimoshaver, Mehrdad A1 - Hajivaliei, Hatameh A1 - Shokri, Manouchehr A1 - Khalesro, Shakila A1 - Aram, Farshid A1 - Shamshirband, Shahaboddin T1 - A Model for Locating Tall Buildings through a Visual Analysis Approach JF - Applied Sciences N2 - Tall buildings have become an integral part of cities despite all their pros and cons. Some current tall buildings have several problems because of their unsuitable location; the problems include increasing density, imposing traffic on urban thoroughfares, blocking view corridors, etc. Some of these buildings have destroyed desirable views of the city. In this research, different criteria have been chosen, such as environment, access, social-economic, land-use, and physical context. These criteria and sub-criteria are prioritized and weighted by the analytic network process (ANP) based on experts’ opinions, using Super Decisions V2.8 software. On the other hand, layers corresponding to sub-criteria were made in ArcGIS 10.3 simultaneously, then via a weighted overlay (map algebra), a locating plan was created. In the next step seven hypothetical tall buildings (20 stories), in the best part of the locating plan, were considered to evaluate how much of theses hypothetical buildings would be visible (fuzzy visibility) from the street and open spaces throughout the city. These processes have been modeled by MATLAB software, and the final fuzzy visibility plan was created by ArcGIS. Fuzzy visibility results can help city managers and planners to choose which location is suitable for a tall building and how much visibility may be appropriate. The proposed model can locate tall buildings based on technical and visual criteria in the future development of the city and it can be widely used in any city as long as the criteria and weights are localized. KW - Gebäude KW - Energieeffizienz KW - Sustainability KW - Infrastructures KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210122-43350 UR - https://www.mdpi.com/2076-3417/10/17/6072 VL - 2020 IS - Volume 10, issue 17, article 6072 SP - 1 EP - 25 PB - MDPI CY - Basel ER - TY - JOUR A1 - El-Rayes, Khaled A1 - Hyari, Khalied T1 - A Multi-objective Model for Optimizing Construction Planning of Repetitive Infrastructure Projects N2 - This paper presents the development of a model for optimizing resource utilization in repetitive infrastructure projects. The model provides the capability of simultaneous minimization of both project duration and work interruptions for construction crews. The model provides in a single run, a set of nondominated solutions that represent the tradeoff between these two objectives. The model incorporates a multiobjective genetic algorithm and scheduling algorithm. The model initially generates a randomly selected set of solutions that evolves to a near optimal set of tradeoff solutions in subsequent generations. Each solution represents a unique scheduling solution that is associated with certain project duration and a number of interruption days for utilized construction crews. As such, the model provides project planners with alternative schedules along with their expected duration and resource utilization efficiency. KW - Mehragentensystem KW - Lernendes System KW - Infrastruktur Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2135 ER - TY - JOUR A1 - Saadatfar, Hamid A1 - Khosravi, Samiyeh A1 - Hassannataj Joloudari, Javad A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin T1 - A New K-Nearest Neighbors Classifier for Big Data Based on Efficient Data Pruning JF - Mathematics N2 - The K-nearest neighbors (KNN) machine learning algorithm is a well-known non-parametric classification method. However, like other traditional data mining methods, applying it on big data comes with computational challenges. Indeed, KNN determines the class of a new sample based on the class of its nearest neighbors; however, identifying the neighbors in a large amount of data imposes a large computational cost so that it is no longer applicable by a single computing machine. One of the proposed techniques to make classification methods applicable on large datasets is pruning. LC-KNN is an improved KNN method which first clusters the data into some smaller partitions using the K-means clustering method; and then applies the KNN for each new sample on the partition which its center is the nearest one. However, because the clusters have different shapes and densities, selection of the appropriate cluster is a challenge. In this paper, an approach has been proposed to improve the pruning phase of the LC-KNN method by taking into account these factors. The proposed approach helps to choose a more appropriate cluster of data for looking for the neighbors, thus, increasing the classification accuracy. The performance of the proposed approach is evaluated on different real datasets. The experimental results show the effectiveness of the proposed approach and its higher classification accuracy and lower time cost in comparison to other recent relevant methods. KW - Maschinelles Lernen KW - Machine learning KW - K-nearest neighbors KW - KNN KW - classifier KW - big data KW - clustering KW - cluster shape KW - cluster density KW - classification KW - reinforcement learning KW - data science KW - computation KW - artificial intelligence KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200225-40996 UR - https://www.mdpi.com/2227-7390/8/2/286 VL - 2020 IS - volume 8, issue 2, article 286 PB - MDPI ER - TY - JOUR A1 - Schirmer, Ulrike A1 - Osburg, Andrea T1 - A new method for the quantification of adsorbed styrene acrylate copolymer particles on cementitious surfaces: a critical comparative study JF - SN Applied Sciences N2 - The amount of adsorbed styrene acrylate copolymer (SA) particles on cementitious surfaces at the early stage of hydration was quantitatively determined using three different methodological approaches: the depletion method, the visible spectrophotometry (VIS) and the thermo-gravimetry coupled with mass spectrometry (TG–MS). Considering the advantages and disadvantages of each method, including the respectively required sample preparation, the results for four polymer-modified cement pastes, varying in polymer content and cement fineness, were evaluated. To some extent, significant discrepancies in the adsorption degrees were observed. There is a tendency that significantly lower amounts of adsorbed polymers were identified using TG-MS compared to values determined with the depletion method. Spectrophotometrically generated values were ​​lying in between these extremes. This tendency was found for three of the four cement pastes examined and is originated in sample preparation and methodical limitations. The main influencing factor is the falsification of the polymer concentration in the liquid phase during centrifugation. Interactions in the interface between sediment and supernatant are the cause. The newly developed method, using TG–MS for the quantification of SA particles, proved to be suitable for dealing with these revealed issues. Here, instead of the fluid phase, the sediment is examined with regard to the polymer content, on which the influence of centrifugation is considerably lower. KW - Zement KW - Polymere KW - polymer adsorption KW - cement KW - visible spectrophotometry KW - depletion method KW - mass spectrometry Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210804-44729 UR - https://link.springer.com/article/10.1007/s42452-020-03825-5 VL - 2020 IS - Volume 2, article 2061 SP - 1 EP - 11 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Ibanez, Stalin A1 - Kraus, Matthias T1 - A Numerical Approach for Plastic Cross Cross-Sectional Analyses of Steel Members JF - ce/papers N2 - Global structural analyses in civil engineering are usually performed considering linear-elastic material behavior. However, for steel structures, a certain degree of plasticization depending on the member classification may be considered. Corresponding plastic analyses taking material nonlinearities into account are effectively realized using numerical methods. Frequently applied finite elements of two and three-dimensional models evaluate the plasticity at defined nodes using a yield surface, i.e. by a yield condition, hardening rule, and flow rule. Corresponding calculations are connected to a large numerical as well as time-consuming effort and they do not rely on the theoretical background of beam theory, to which the regulations of standards mainly correspond. For that reason, methods using beam elements (one-dimensional) combined with cross-sectional analyses are commonly applied for steel members in terms of plastic zones theories. In these approaches, plasticization is in general assessed by means of axial stress only. In this paper, more precise numerical representation of the combined stress states, i.e. axial and shear stresses, is presented and results of the proposed approach are validated and discussed. KW - Stahlkonstruktion KW - Plastizität KW - Strukturanalyse KW - Stahlbauteil KW - Axialspannung KW - Finite-Elemente-Methode Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220112-45622 UR - https://onlinelibrary.wiley.com/doi/full/10.1002/cepa.1527 VL - 2021 IS - Volume 4, issue 2-4 SP - 2098 EP - 2106 PB - Ernst & Sohn, a Wiley brand CY - Berlin ER - TY - JOUR A1 - Vu-Bac, N. A1 - Nguyen-Xuan, Hung A1 - Chen, Lei A1 - Lee, C.K. A1 - Zi, Goangseup A1 - Zhuang, Xiaoying A1 - Liu, G.R. A1 - Rabczuk, Timon T1 - A phantom-node method with edge-based strain smoothing for linear elastic fracture mechanics JF - Journal of Applied Mathematics N2 - This paper presents a novel numerical procedure based on the combination of an edge-based smoothed finite element (ES-FEM) with a phantom-node method for 2D linear elastic fracture mechanics. In the standard phantom-node method, the cracks are formulated by adding phantom nodes, and the cracked element is replaced by two new superimposed elements. This approach is quite simple to implement into existing explicit finite element programs. The shape functions associated with discontinuous elements are similar to those of the standard finite elements, which leads to certain simplification with implementing in the existing codes. The phantom-node method allows modeling discontinuities at an arbitrary location in the mesh. The ES-FEM model owns a close-to-exact stiffness that is much softer than lower-order finite element methods (FEM). Taking advantage of both the ES-FEM and the phantom-node method, we introduce an edge-based strain smoothing technique for the phantom-node method. Numerical results show that the proposed method achieves high accuracy compared with the extended finite element method (XFEM) and other reference solutions. KW - Finite-Elemente-Methode KW - Steifigkeit KW - Bruchmechanik KW - Riss Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170426-31676 ER - TY - JOUR A1 - Foorgber, U. A1 - Müller, Christian T1 - A Planning Process Model for Computer Supported Cooperative Work in Building Construction N2 - Increasing complexity of today's buildings requires a high level of integration in the planning process. Common planning strategies, where individual project partners cooperate mainly to exchange results, are not suitable to jointly develop project goals and objectives. Integrated planning, a more holistic approach to deal with complex problems, is based on a high degree of communication amoung team members and leads to a goal oriented cooperation. Current approaches in the reasearch area of Computer Supported Cooperative Work (CSCW) poorly meet the requirements in planning. A planning process model, based on the principles of integrated planning will be introduced, aimed to provide the background for the implementation of a CSCW-platform. KW - Bauwesen KW - Integrierte Planung KW - Computer Supported Cooperative Work Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4922 ER - TY - JOUR A1 - Mironov, Vadim A1 - Pahl, Peter Jan T1 - A Prismatic Finite Element for Accurate Arch Dam Analysis N2 - The displacements and stresses in arch dams and their abutments are frequently determined with 20-node brick elements. The elements are distorted near the contact plane between the wall and the abutment. A cantilever beam testbed has been developed to investigate the consequences of this distortion. It is shown that the deterioration of the accuracy in the computed stresses is significant. A compatible 18-node wedge element with linear stress variation is developed as an alternative to the brick element. The shape of this element type is readily adapted to the shape of the contact plane. It is shown that the accuracy of the computed stresses in the vicinity of the contact plane is improved significantly by the use of wedge elements. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Dammbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2467 ER - TY - JOUR A1 - Rebolj, D. T1 - A Product Model of a Road N2 - Many errors and delays frequently appear when data is exchanged between particular tasks in the lifecycle of the road. Inter-task connections are therefore of great importance for the quality of the final product. The article describes a product model of a road wich is the kernel of an integrated information system intended to support all important stages of the road lifecycle: design, evaluation (through different analysis procedures), construction, and maintainance. Since particular tasks are often executed at different places and in different companies, the interconnections are supported by a special metafile which contains all specific data of the product model. The concept of the integrated system is object and component oriented. Additionally, existing conventional program packages are included to support some common tasks (methods). A conventional relational database system as well as an open spatial database system with the relevant GIS functionality are included to support the data structures of the model. KW - Straße KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4584 ER - TY - JOUR A1 - Lutolli, Blerim T1 - A Review of Domed Cities and Architecture: Past, Present and Future JF - Future cities and environment N2 - The goal of architecture is changing in response to the expanding role of cities, rapid urbanization, and transformation under changing economic, environmental, social, and demographic factors. As cities increased in the early modern era, overcrowding, urbanization, and pollution conditions led reformers to consider the future shape of the cities. One of the most critical topics in contemporary architecture is the subject of the future concepts of living. In most cases, domed cities, as a future concept of living, are rarely considered, and they are used chiefly as “utopian” visions in the discourse of future ways of living. This paper highlights the reviews of domed cities to deepen the understanding of the idea in practice, like its approach in terms of architecture. The main aim of this paper is to provide a broad overview for domed cities in the face of pollution as one of the main concerns in many European cities. As a result, the significance of the reviews of the existing projects is focused on their conceptual quality. This review will pave the way for further studies in terms of future developments in the realm of domed cities. In this paper, the city of Celje, one of the most polluted cities in Slovenia, is taken as a case study for considering the concept of Dome incorporated due to the lack of accessible literature on the topic. This review’s primary contribution is to allow architects to explore a broad spectrum of innovation by comparing today’s achievable statuses against the possibilities generated by domed cities. As a result of this study, the concept of living under the Dome remains to be developed in theory and practice. The current challenging climatic situation will accelerate the evolution of these concepts, resulting in the formation of new typologies, which are a requirement for humanity. KW - Architektur KW - Wohnform KW - Umweltverschutzung KW - Domed Cities KW - Architecture KW - Concept of Living KW - Architecture Pollution KW - Kuppelstadt KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221103-47335 UR - https://futurecitiesandenvironment.com/articles/10.5334/fce.154/ VL - 2022 IS - Volume 8, issue 1 SP - 1 EP - 9 PB - Ubiquity Press Limited CY - London ER - TY - JOUR A1 - Alkam, Feras A1 - Lahmer, Tom T1 - A robust method of the status monitoring of catenary poles installed along high-speed electrified train tracks JF - Results in Engineering N2 - Electric trains are considered one of the most eco-friendly and safest means of transportation. Catenary poles are used worldwide to support overhead power lines for electric trains. The performance of the catenary poles has an extensive influence on the integrity of the train systems and, consequently, the connected human services. It became a must nowadays to develop SHM systems that provide the instantaneous status of catenary poles in- service, making the decision-making processes to keep or repair the damaged poles more feasible. This study develops a data-driven, model-free approach for status monitoring of cantilever structures, focusing on pre-stressed, spun-cast ultrahigh-strength concrete catenary poles installed along high-speed train tracks. The pro-posed approach evaluates multiple damage features in an unfied damage index, which leads to straightforward interpretation and comparison of the output. Besides, it distinguishes between multiple damage scenarios of the poles, either the ones caused by material degradation of the concrete or by the cracks that can be propagated during the life span of the given structure. Moreover, using a logistic function to classify the integrity of structure avoids the expensive learning step in the existing damage detection approaches, namely, using the modern machine and deep learning methods. The findings of this study look very promising when applied to other types of cantilever structures, such as the poles that support the power transmission lines, antenna masts, chimneys, and wind turbines. KW - Fahrleitung KW - Catenary poles KW - SHM KW - Model-free status monitoring KW - Sigmoid function KW - High-speed electric train KW - Schaden KW - OA-Publikationsfonds2021 Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211011-45212 UR - https://www.sciencedirect.com/science/article/pii/S2590123021000906?via%3Dihub VL - 2021 IS - volume 12, article 100289 SP - 1 EP - 8 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Talebi, Hossein A1 - Zi, Goangseup A1 - Silani, Mohammad A1 - Samaniego, Esteban A1 - Rabczuk, Timon T1 - A simple circular cell method for multilevel finite element analysis JF - Journal of Applied Mathematics N2 - A simple multiscale analysis framework for heterogeneous solids based on a computational homogenization technique is presented. The macroscopic strain is linked kinematically to the boundary displacement of a circular or spherical representative volume which contains the microscopic information of the material. The macroscopic stress is obtained from the energy principle between the macroscopic scale and the microscopic scale. This new method is applied to several standard examples to show its accuracy and consistency of the method proposed. KW - Finite-Elemente-Methode KW - Feststoff Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170426-31639 ER - TY - JOUR A1 - Yabuki, Nobuyoshi A1 - Kotani, Jun A1 - Shitani, Tomoaki T1 - A Steel Bridge Design System Architecture using VR-CAD and Web Service-based Multi-Agents N2 - This paper presents a new design environment based on Multi-Agents and Virtual Reality (VR). In this research, a design system with a virtual reality function was developed. The virtual world was realized by using GL4Java, liquid crystal shutter glasses, sensor systems, etc. And the Multi-Agent CAD system with product models, which had been developed before, was integrated with the VR design system. A prototype system was developed for highway steel plate girder bridges, and was applied to a design problem. The application verified the effectiveness of the developed system. KW - Mehragentensystem KW - Lernendes System KW - Stahlbrücke KW - Virtuelle Realität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2146 ER - TY - JOUR A1 - Le, Ha Thanh A1 - Nguyen, Sang Thanh A1 - Ludwig, Horst-Michael T1 - A Study on High Performance Fine-Grained Concrete Containing Rice Husk Ash JF - International Journal of Concrete Structures and Materials N2 - Rice husk ash (RHA) is classified as a highly reactive pozzolan. It has a very high silica content similar to that of silica fume (SF). Using less-expensive and locally available RHA as a mineral admixture in concrete brings ample benefits to the costs, the technical properties of concrete as well as to the environment. An experimental study of the effect of RHA blending on workability, strength and durability of high performance fine-grained concrete (HPFGC) is presented. The results show that the addition of RHA to HPFGC improved significantly compressive strength, splitting tensile strength and chloride penetration resistance. Interestingly, the ratio of compressive strength to splitting tensile strength of HPFGC was lower than that of ordinary concrete, especially for the concrete made with 20 % RHA. Compressive strength and splitting tensile strength of HPFGC containing RHA was similar and slightly higher, respectively, than for HPFGC containing SF. Chloride penetration resistance of HPFGC containing 10–15 % RHA was comparable with that of HPFGC containing 10 % SF. KW - Hochfester Beton KW - Verarbeitungseigenschaft KW - Druckfestigkeit KW - high performance fine-grained concrete, rice husk ash, workability, compressive strength, splitting tensile strength, chloride penetration resistance Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31477 SP - 301 EP - 307 ER - TY - JOUR A1 - Koike, Hirotaka A1 - Morimoto, Akinori A1 - Imamura, Maki T1 - A Study on the Relationships of Residential Electricity Consumption and Automobile Energy Consumption with Urban Forms Using GIS N2 - In this Paper, we explored the relation between the electricity consumption in residential sector and the automobile energy consumption in transportation sector in accordance with the location of city by employing Geographic Information System (GIS). We found in the study that the electricity consumption per capita has a tendency that is higher in city center and lower in suburbs in Utsunomiya city. It is also noted that there is little difference among total consumption between city center and suburbs, despite the fact that the density of electric appliances tends to increase in a small size house of city center and the amount of automobile energy consumption from residence is lower in city center than in suburbs. KW - Geoinformationssystem KW - Stadtplanung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2690 ER - TY - JOUR A1 - Harirchian, Ehsan A1 - Kumari, Vandana A1 - Jadhav, Kirti A1 - Rasulzade, Shahla A1 - Lahmer, Tom A1 - Raj Das, Rohan T1 - A Synthesized Study Based on Machine Learning Approaches for Rapid Classifying Earthquake Damage Grades to RC Buildings JF - Applied Sciences N2 - A vast number of existing buildings were constructed before the development and enforcement of seismic design codes, which run into the risk of being severely damaged under the action of seismic excitations. This poses not only a threat to the life of people but also affects the socio-economic stability in the affected area. Therefore, it is necessary to assess such buildings’ present vulnerability to make an educated decision regarding risk mitigation by seismic strengthening techniques such as retrofitting. However, it is economically and timely manner not feasible to inspect, repair, and augment every old building on an urban scale. As a result, a reliable rapid screening methods, namely Rapid Visual Screening (RVS), have garnered increasing interest among researchers and decision-makers alike. In this study, the effectiveness of five different Machine Learning (ML) techniques in vulnerability prediction applications have been investigated. The damage data of four different earthquakes from Ecuador, Haiti, Nepal, and South Korea, have been utilized to train and test the developed models. Eight performance modifiers have been implemented as variables with a supervised ML. The investigations on this paper illustrate that the assessed vulnerability classes by ML techniques were very close to the actual damage levels observed in the buildings. KW - Maschinelles Lernen KW - Neuronales Netz KW - Machine learning KW - Building safety assessment KW - artificial neural networks KW - supervised learning KW - damaged buildings KW - rapid classification KW - OA-Publikationsfonds2021 Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210818-44853 UR - https://www.mdpi.com/2076-3417/11/16/7540 VL - 2021 IS - Volume 11, issue 16, article 7540 SP - 1 EP - 33 PB - MDPI CY - Basel ER - TY - JOUR A1 - Schwerzmann, Katia T1 - Abolish! Against the Use of Risk Assessment Algorithms at Sentencing in the US Criminal Justice System JF - Philosophy & Technology N2 - In this article, I show why it is necessary to abolish the use of predictive algorithms in the US criminal justice system at sentencing. After presenting the functioning of these algorithms in their context of emergence, I offer three arguments to demonstrate why their abolition is imperative. First, I show that sentencing based on predictive algorithms induces a process of rewriting the temporality of the judged individual, flattening their life into a present inescapably doomed by its past. Second, I demonstrate that recursive processes, comprising predictive algorithms and the decisions based on their predictions, systematically suppress outliers and progressively transform reality to match predictions. In my third and final argument, I show that decisions made on the basis of predictive algorithms actively perform a biopolitical understanding of justice as management and modulation of risks. In such a framework, justice becomes a means to maintain a perverse social homeostasis that systematically exposes disenfranchised Black and Brown populations to risk. KW - Biopolitik KW - Soziale Gerechtigkeit KW - Algorithmus KW - predictive algorithms KW - cybernetics KW - criminal justice KW - social justice KW - biopolitics Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211207-45417 UR - https://link.springer.com/article/10.1007/s13347-021-00491-2 VL - 2021 SP - 1 EP - 22 ER - TY - JOUR A1 - Huhn, Michael T1 - Abstract and Concrete Scenarios in Concurrent Engineering N2 - An architecture of a distributed planning system for the building industry has been developed. The emphasis is on highly collaborative environments in steelwork, timber construction etc. where designers concurrently handle 3D models. The overall system connects local design systems by the so-called Design Framework DFW. This framework consists of the definition of distributed components and protocols which make the collaborative design work. The process of collaborative design has been formalized on an abstract level. This paper describes how this has been done. A sample is given to illustrate the mapping of concrete scenarios of the ‘real design world’ to an abstract scenario level. This work is funded by the Deutsche Forschungsgemeinschaft DFG as part of the project SPP1103 (Meißner et al. 2003). KW - Produktmodell KW - Bautechnik KW - Forschungskooperation KW - Framework Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2068 ER - TY - JOUR A1 - Albert, Andrej A1 - Freischlad, Mark A1 - Pullmann, Torben T1 - Acquisition of Conceptual Design Knowledge in Structural Engineering N2 - Expert systems integrating fuzzy reasoning techniques represent a powerful tool to support practicing engineers during the early stages of structural design. In this context fuzzy models have proved themselves to be very suitable for the representation of complex design knowledge. However their definition is a laborious task. This paper introduces an approach for the design and the optimization of fuzzy systems based upon Genetic Programming. To keep the emerging fuzzy systems transparent a new framework for the definition of linguistic variables is also introduced. KW - Mehragentensystem KW - Lernendes System KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2154 ER - TY - JOUR A1 - Lee, Kangkun A1 - Lee, Kijang T1 - Additional bending moment for shear-lag phenomenon in tube structures N2 - Framed-tube system with multiple internal tubes is analysed using an orthotropic box beam analogy approach in which each tube is individually modelled by a box beam that accounts for the flexural and shear deformations, as well as the shear-lag effects. A simple numerical modeling technique is proposed for estimating the shear-lag phenomenon in tube structures with multiple internal tubes. The proposed method idealizes the framed-tube structures with multiple internal tubes as equivalent multiple tubes, each composed of four equivalent orthotropic plate panels. The numerical analysis is based on the minimum potential energy principle in conjunction with the variational approach. The shear-lag phenomenon of such structures is studied taking into account the additional bending moments in the tubes. A detailed work is carried out through the numerical analysis of the additional bending moment. The moment factor is further introduced to identify the shear lag phenomenon along with the additional moment. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Hochhaus Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2472 ER - TY - JOUR A1 - Teitelbaum, Eric A1 - Alsaad, Hayder A1 - Aviv, Dorit A1 - Kim, Alexander A1 - Völker, Conrad A1 - Meggers, Forrest A1 - Pantelic, Jovan T1 - Addressing a systematic error correcting for free and mixed convection when measuring mean radiant temperature with globe thermometers JF - Scientific reports N2 - It is widely accepted that most people spend the majority of their lives indoors. Most individuals do not realize that while indoors, roughly half of heat exchange affecting their thermal comfort is in the form of thermal infrared radiation. We show that while researchers have been aware of its thermal comfort significance over the past century, systemic error has crept into the most common evaluation techniques, preventing adequate characterization of the radiant environment. Measuring and characterizing radiant heat transfer is a critical component of both building energy efficiency and occupant thermal comfort and productivity. Globe thermometers are typically used to measure mean radiant temperature (MRT), a commonly used metric for accounting for the radiant effects of an environment at a point in space. In this paper we extend previous field work to a controlled laboratory setting to (1) rigorously demonstrate that existing correction factors used in the American Society of Heating Ventilation and Air-conditioning Engineers (ASHRAE) Standard 55 or ISO7726 for using globe thermometers to quantify MRT are not sufficient; (2) develop a correction to improve the use of globe thermometers to address problems in the current standards; and (3) show that mean radiant temperature measured with ping-pong ball-sized globe thermometers is not reliable due to a stochastic convective bias. We also provide an analysis of the maximum precision of globe sensors themselves, a piece missing from the domain in contemporary literature. KW - Strahlungstemperatur KW - Mean radiant temperature KW - Globe thermometers KW - Indoor environment KW - Thermal comfort KW - Measurements KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220509-46363 UR - https://www.nature.com/articles/s41598-022-10172-5#citeas VL - 2022 IS - Volume 12, article 6473 PB - Springer Nature CY - London ER - TY - JOUR A1 - Hildebrand, Jörg A1 - Hecht, Kerstin A1 - Bliedtner, Jens A1 - Müller, Hartmut T1 - Advanced Analysis of Laser Beam Polishing of Quartz Glass Surfaces JF - Physics Procedia N2 - The laser beam is a small, flexible and fast polishing tool. With laser radiation it is possible to finish many outlines or geometries on quartz glass surfaces in the shortest possible time. It’s a fact that the temperature developing while polishing determines the reachable surface smoothing and, as a negative result, causes material tensions. To find out which parameters are important for the laser polishing process and the surface roughness respectively and to estimate material tensions, temperature simulations and extensive polishing experiments took place. During these experiments starting and machining parameters were changed and temperatures were measured contact-free. The accuracy of thermal and mechanical simulation was improved in the case of advanced FE-analysis. KW - Laser KW - Berührungslose Messung KW - Polieren KW - Empfindlichkeit KW - Quarzglas KW - laser; contactless measurement; quartz glass; polishing; temperature; residual stress; simulation; sensitivity Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170418-31372 UR - http://www.sciencedirect.com/science/article/pii/S1875389212025667 SP - 277 EP - 285 ER - TY - JOUR A1 - Rafiee, Roham A1 - Rabczuk, Timon A1 - Milani, Abbas S. A1 - Tserpes, Konstantinos I. T1 - Advances in Characterization and Modeling of Nanoreinforced Composites JF - JOURNAL OF NANOMATERIALS N2 - This special issue deals with a range of recently developed characterization and modeling techniques employed to better understand and predict the response of nanoreinforced composites at different scales. KW - Physikalische Eigenschaft KW - Werkstoff KW - nanoreinforced composites Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170411-31134 ER - TY - JOUR A1 - Morgenthal, Guido A1 - Yamasaki, Y. T1 - Aerodynamic Behaviour of Very Long Cable-Stayed Bridges during Construction JF - Procedia Engineering N2 - Stonecutters and Sutong Bridge have pushed the world record for main span length of cable-stayed bridges to over 1000m. The design of these bridges, both located in typhoon prone regions, is strongly influenced by wind effects during their erection. Rigorous wind tunnel test programmes have been devised and executed to determine the aerodynamic behaviour of the structures in the most critical erection conditions. Testing was augmented by analytical and numerical analyses to verify the safety of the structures throughout construction and to ensure that no serviceability problems would affect the erection process. This paper outlines the wind properties assumed for the bridge sites, the experimental test programme with some of its results, the dynamic properties of the bridges during free cantilevering erection and the assessment of their aerodynamic performance. Along the way, it discusses the similarities and some revealing differences between the two bridges in terms of their dynamic response to wind action. KW - Kabelbrücke KW - Windkanal KW - Cable-stayed bridges; wind engineering; wind tunnel testing; construction Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31525 SP - 1463 EP - 1471 ER - TY - JOUR A1 - Allen, Stan T1 - After mechanical reproduction N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,1-2/61-64 KW - Architektur KW - Technologie KW - Fiktion KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11686 ER - TY - JOUR A1 - Köhler, Hermann A1 - König, Reinhard T1 - Aktionsräume in Dresden N2 - In vorliegender Studie werden die Aktionsräume von Befragten in Dresden über eine standardisierte Befragung (n=360) untersucht. Die den Aktionsräumen zugrundeliegenden Aktivitäten werden unterschieden in Einkaufen für den täglichen Bedarf, Ausgehen (z.B. in Café, Kneipe, Gaststätte), Erholung im Freien (z.B. spazieren gehen, Nutzung von Grünanlagen) und private Geselligkeit (z.B. Feiern, Besuch von Verwandten/Freunden). Der Aktionsradius wird unterschieden in Wohnviertel, Nachbarviertel und sonstiges weiteres Stadtgebiet. Um aus den vier betrachteten Aktivitäten einen umfassenden Kennwert für den durchschnittlichen Aktionsradius eines Befragten zu bilden, wird ein Modell für den Kennwert eines Aktionsradius entwickelt. Die Studie kommt zu dem Ergebnis, dass das Alter der Befragten einen signifikanten – wenn auch geringen – Einfluss auf den Aktionsradius hat. Das Haushaltsnettoeinkommen hat einen mit Einschränkung signifikanten, ebenfalls geringen Einfluss auf alltägliche Aktivitäten der Befragten. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 14 KW - Aktionsraumforschung KW - Quantitative Sozialforschung KW - Dresden Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160822-26726 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - JOUR A1 - Kopp, Anatole T1 - Als die Moderne kein Stil, sondern eine Ursache war : die sozialen Wurzeln der modernen Architektur N2 - Wissenschaftliches Kolloquium vom 24. bis 26. Juni 1986 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Der wissenschaftlich-technische Fortschritt und die sozial-kulturellen Funktionen von Architektur und industrieller Formgestaltung in unserer Epoche' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 33.1987,4-6/316-320 KW - Architekturtheorie KW - Moderne KW - Bauhaus-Kolloquium KW - Weimar KW - 1986 Y1 - 1987 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10111 ER - TY - JOUR A1 - Schnaidt, Claude T1 - Alt und Neu - Helft mir zu verstehen! N2 - Wissenschaftliches Kolloquium vom 24. bis 26. Juni 1986 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Der wissenschaftlich-technische Fortschritt und die sozial-kulturellen Funktionen von Architektur und industrieller Formgestaltung in unserer Epoche' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 33.1987,4-6/219-223 KW - Altbaumodernisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 1986 Y1 - 1987 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10148 ER - TY - JOUR A1 - Morris, Marc T1 - American images of Utopia N2 - Wissenschaftliches Kolloquium vom 27. - 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚ Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,3-4/309-314 KW - Celebration KW - Stadtplanung KW - Stadt KW - Gründung KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-12195 ER - TY - JOUR A1 - Berkowski, P. A1 - Boron, Jacek T1 - An Algorithm of compromise structural Optimisation of Bar Structures N2 - Authors' own research in applied unicriterial and multicriterial optimisation of bar structures, and also an analysis of accessible bibliography on structural synthesis allows to present herein an attempt to define a general algorithm for proceeding in formulation of a structural optimisation problem. A practical aspect of such an algorithm consists, in author's opinion, in enabling a designer a correct creation of a mathematical model of synthesis problems, independently of known mathematical methods employed to looking for an unconditional extremum of function of several variables. A proposed algorithm is not a ready-for-use tool for solving all the optimisation problems, but it constitutes an easy-to-expand theoretical basis. This basis should allow a designer to create a proper set of compromises on the way to construct a mathematical model of a specific optimisation problem. The algorithm, presented in the paper, is constructed as a sequence of the one-after-another problem questions, on which the designer answers: yes or no, and a set of selections from the knowledge base consisting of the elements of an optimisation problem components. The order of making questions adopted by the authors in the algorithm is subjective, however it is supported by their experience, both in applied optimisation and in designing of structures like trusses or frames. KW - Stabwerk KW - Optimierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5264 ER - TY - JOUR A1 - Homaei, Mohammad Hossein A1 - Soleimani, Faezeh A1 - Shamshirband, Shahaboddin A1 - Mosavi, Amir A1 - Nabipour, Narjes A1 - Varkonyi-Koczy, Annamaria R. T1 - An Enhanced Distributed Congestion Control Method for Classical 6LowPAN Protocols Using Fuzzy Decision System JF - IEEE Access N2 - The classical Internet of things routing and wireless sensor networks can provide more precise monitoring of the covered area due to the higher number of utilized nodes. Because of the limitations in shared transfer media, many nodes in the network are prone to the collision in simultaneous transmissions. Medium access control protocols are usually more practical in networks with low traffic, which are not subjected to external noise from adjacent frequencies. There are preventive, detection and control solutions to congestion management in the network which are all the focus of this study. In the congestion prevention phase, the proposed method chooses the next step of the path using the Fuzzy decision-making system to distribute network traffic via optimal paths. In the congestion detection phase, a dynamic approach to queue management was designed to detect congestion in the least amount of time and prevent the collision. In the congestion control phase, the back-pressure method was used based on the quality of the queue to decrease the probability of linking in the pathway from the pre-congested node. The main goals of this study are to balance energy consumption in network nodes, reducing the rate of lost packets and increasing quality of service in routing. Simulation results proved the proposed Congestion Control Fuzzy Decision Making (CCFDM) method was more capable in improving routing parameters as compared to recent algorithms. KW - Internet der dinge KW - IOT KW - Internet of things KW - wireless sensor network KW - congestion control KW - fuzzy decision making KW - back-pressure Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200213-40805 UR - https://ieeexplore.ieee.org/document/8967114 IS - volume 8 SP - 20628 EP - 20645 PB - IEEE ER - TY - JOUR A1 - Yabuki, Nobuyoshi A1 - Yoshimura, Yutaka T1 - An Evaluation System for Steel Structures of Hydroelectric Power Stations based on Fault Tree Analysis and Performance Maps N2 - This paper presents an evaluation system for steel structures of hydroelectric power stations, including hydraulic gates and penstocks, based on Fault Tree Analyasis (FTA) and performance maps. This system consists of fault tree diagrams of FTA, performance maps, design and analysis systems, and engineerin databases. These four modules are integrated by appropriate hyperlinks so that the user of this system can use it easily and seamlessly. A well developed system was applied to some illustrative example cases, and they showed that the developed methodology and system worked well and the users found the system useful and effective for their maintenance tasks at powerstations. KW - Wissensmanagement KW - Stahlbau KW - Wasserkraftwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2564 ER - TY - JOUR A1 - Mosavi, Amir A1 - Najafi, Bahman A1 - Faizollahzadeh Ardabili, Sina A1 - Shamshirband, Shahaboddin A1 - Rabczuk, Timon T1 - An Intelligent Artificial Neural Network-Response Surface Methodology Method for Accessing the Optimum Biodiesel and Diesel Fuel Blending Conditions in a Diesel Engine from the Viewpoint of Exergy and Energy Analysis JF - Energies N2 - Biodiesel, as the main alternative fuel to diesel fuel which is produced from renewable and available resources, improves the engine emissions during combustion in diesel engines. In this study, the biodiesel is produced initially from waste cooking oil (WCO). The fuel samples are applied in a diesel engine and the engine performance has been considered from the viewpoint of exergy and energy approaches. Engine tests are performed at a constant 1500 rpm speed with various loads and fuel samples. The obtained experimental data are also applied to develop an artificial neural network (ANN) model. Response surface methodology (RSM) is employed to optimize the exergy and energy efficiencies. Based on the results of the energy analysis, optimal engine performance is obtained at 80% of full load in presence of B10 and B20 fuels. However, based on the exergy analysis results, optimal engine performance is obtained at 80% of full load in presence of B90 and B100 fuels. The optimum values of exergy and energy efficiencies are in the range of 25–30% of full load, which is the same as the calculated range obtained from mathematical modeling. KW - Biodiesel KW - ANN modeling KW - biodiesel KW - Artificial Intelligence KW - diesel engines KW - energy, exergy KW - mathematical modeling KW - OA-Publikationsfonds2018 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180507-37467 UR - http://www.mdpi.com/1996-1073/11/4/860 VL - 2018 IS - 11, 4 PB - MDPI CY - Basel ER - TY - JOUR A1 - Anders, Frauke A1 - König, Reinhard T1 - Analyse und Generierung von Straßennetzwerken mittels graphenbasierter Methoden N2 - Der vorliegende Beitrag ist in zwei thematische Teilebereiche gegliedert. Der erste Teil beschäftigt sich mit der Analyse von Graphen, insbesondere von Graphen, die Straßennetzwerke repräsentieren. Hierzu werden Methoden aus der Graphentheorie angewendet und Kenngrößen aus der Space Syntax Methode ausgewertet. Ein Framework, welches basierend auf der Graphentheorie in Architektur und Stadtplanung Einzug gehalten hat, ist die Space Syntax Methode. Sie umfasst die Ableitung unterschiedlicher Kenngrößen eines Graphen bzw. Netzwerkes, wodurch eine Analyse für architektonische und stadtplanerische Zwecke ermöglicht wird. Der zweite Teil dieses Berichts beschäftigt sich mit der Generierung von Graphen, insbe-sondere der von Straßennetzwerkgraphen. Die generativen Methoden basieren zum Teil auf den gewonnenen Erkenntnissen der Analyse von Straßennetzwerken. Es werden unterschiedliche Ansätze untersucht, um verschiedene Parameterwerte zur Generierung von Straßengraphen festzulegen. Als Ergebnis der Arbeiten ist ein Softwaretool entstanden, welches es erlaubt, auf Grundlage einer Voronoi-Tesselierung realistische Straßennetzwerkgraphen zu erzeugen. T3 - Arbeitspapiere Informatik in der Architektur - Nr. 7 KW - Graph KW - Straßennetzwerk analyse, graph-basierte generative Methoden Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120509-16514 UR - http://infar.architektur.uni-weimar.de/service/drupal-infar/Arbeitspapiere ER - TY - JOUR A1 - van Treeck, Christoph A1 - Rank, Ernst T1 - Analysis of building structure and topology based on Graph Theory N2 - Individual views on a building product of people involved in the design process imply different models for planning and calculation. In order to interpret these geometrical, topological and semantical data of a building model we identify a structural component graph, a graph of room faces, a room graph and a relational object graph as aids and we explain algorithms to derive these relations. The application of the technique presented is demonstrated by the analysis and discretization of a sample model in the scope of building energy simulation. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Graphentheorie KW - Ingenieurbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2308 ER - TY - JOUR A1 - Guo, Hongwei A1 - Zhuang, Xiaoying A1 - Chen, Pengwan A1 - Alajlan, Naif A1 - Rabczuk, Timon T1 - Analysis of three-dimensional potential problems in non-homogeneous media with physics-informed deep collocation method using material transfer learning and sensitivity analysis JF - Engineering with Computers N2 - In this work, we present a deep collocation method (DCM) for three-dimensional potential problems in non-homogeneous media. This approach utilizes a physics-informed neural network with material transfer learning reducing the solution of the non-homogeneous partial differential equations to an optimization problem. We tested different configurations of the physics-informed neural network including smooth activation functions, sampling methods for collocation points generation and combined optimizers. A material transfer learning technique is utilized for non-homogeneous media with different material gradations and parameters, which enhance the generality and robustness of the proposed method. In order to identify the most influential parameters of the network configuration, we carried out a global sensitivity analysis. Finally, we provide a convergence proof of our DCM. The approach is validated through several benchmark problems, also testing different material variations. KW - Deep learning KW - Kollokationsmethode KW - Collocation method KW - Potential problem KW - Activation function KW - Transfer learning Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220811-46764 UR - https://link.springer.com/article/10.1007/s00366-022-01633-6 VL - 2022 SP - 1 EP - 22 ER - TY - JOUR A1 - Fuchs, Joachim T1 - Anliegen und Probleme der Arbeitsumweltgestaltung bei der Durchsetzung des Ministerratsbeschlusses vom 11. Oktober 1984 N2 - Wissenschaftliches Kolloquium vom 24. bis 26. Juni 1986 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Der wissenschaftlich-technische Fortschritt und die sozial-kulturellen Funktionen von Architektur und industrieller Formgestaltung in unserer Epoche' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 33.1987,4-6/204-205 KW - Arbeitsplatzgestaltung KW - Design KW - Bauhaus-Kolloquium KW - Weimar KW - 1986 Y1 - 1987 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10287 ER - TY - JOUR A1 - Ricken, Herbert T1 - Anmerkungen zur Dialektik von Technischem und Ästhetischem in der Architektur N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 36.1990,1-3/31-34 KW - Architektur KW - Technik KW - Ästhetik KW - Bauhaus-Kolloquium KW - Weimar KW - 1989 Y1 - 1990 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10870 ER - TY - JOUR A1 - Wang, Quan A1 - Arash, Behrouz T1 - Announcement of a virtual special issue on computational carbon nanoscience JF - Carbon N2 - The Carbon journal is pleased to introduce a themed collection of recent articles in the area of computational carbon nanoscience. This virtual special issue was assembled from previously published Carbon articles by Guest Editors Quan Wang and Behrouz Arash, and can be accessed as a set in the special issue section of the journal website homepage: www.journals.elsevier.com/carbon. The article below by our guest editors serves as an introduction to this virtual special issue, and also a commentary on the growing role of computation as a tool to understand the synthesis and properties of carbon nanoforms and their behavior in composite materials. KW - Kohlenstoff KW - Nanowissenschaften KW - Verbundwerkstoff Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170428-31695 SP - 370 EP - 372 ER - TY - JOUR A1 - Muche, Georg T1 - Ansprache aus Anlaß der Verleihung der Ehrendoktorwürde der Hochschule für Architektur und Bauwesen Weimar am 28.6.1979 N2 - Wissenschaftliches Kolloquium vom 27. bis 29. Juni 1979 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: '60 Jahre Gründung Bauhaus' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 26.1979,4-5/294-295 KW - Muche KW - Georg KW - Ehrendoktorwürde KW - Bauhaus-Kolloquium KW - Weimar KW - 1979 Y1 - 1979 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-9248 ER - TY - JOUR A1 - Coenen, Ekkehard T1 - Anti-Gewalttrainings, Gewaltwissen und die institutionelle Erzeugung gewaltbefreiter Subjekte JF - Soziale Passagen N2 - Dieser Beitrag fragt danach, wie Wissen über Gewalt in Anti-Gewalttrainings produziert, vermittelt und sozial wirkmächtig wird. Auf Basis des kommunikativen Konstruktivismus werden diese Kurse als gewaltbezogene Institutionen begriffen, in denen eine Wissensordnung der Gewalt stabilisiert wird. Sie sollen Abweichungen von institutionalisierten Wirklichkeitsvorstellungen in Bezug auf Gewalt entgegenwirken. Dabei lassen sie sich als Selbsttechniken begreifen, durch welche die Kursteilnehmer*innen eine spezifische Subjektposition einüben, nämlich die des gewaltbefreiten Subjekts. Vor diesem Hintergrund wird anschließend zwischen konditionalen und konzessiven Anti-Gewalttrainings unterschieden. Erstere wenden sich an Personen, die tatsächlich von der institutionalisierten Wirklichkeitsvorstellung abgewichen sind und somit gesellschaftlich als Gewalttäter*innen eingestuft werden, während Letztere auf eine Klientel zielen, die potenziell von den gängigen Normen abweichen könnte, obwohl noch keine Gewalt aufgetreten sein muss. Abschließend wird gezeigt, dass den Kursleiter*innen eine wichtige Rolle im Subjektivierungsprozess und der Wissenskommunikation über Gewalt zukommt. Neben Wissen über Gewalt werden durch sie auch Wertbindungen, Legitimationen und Weltbilder vermittelt. KW - Gewalt KW - Soziologie KW - Wissenssoziologie KW - Gewaltprävention KW - gewaltbezogene Institution KW - Subjektivierung KW - kommunikativer Konstruktivismus Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230720-64104 UR - https://link.springer.com/article/10.1007/s12592-023-00453-9 VL - 2023 SP - 1 EP - 16 PB - VS, Verl. für Sozialwissenschaften/GWV-Fachverlag CY - Wiesbaden ER - TY - JOUR A1 - Misztal, S. A1 - Misztal, G. T1 - Anwendung von Delta-Dirac-Funktion und Heviside-Funktion zur Berechnung der inneren Kräfte und Verschiebungen in gebogenen Balken N2 - Die d - Dirac - Funktion d(x-xi) und Heviside - Funktion wurden vor allem zur Beschreibung diskontinuierlicher Belastungsfunktionen von gebogenen Balken angewendet. Im Referat werden die mathematischen Operationen auf den erwähnten Funktionen dargestellt. Darüber hinaus wird die Möglichkeit eindeutiger Aufschreibung von belibigen Belestungsfunktionen vorgeschlagen, die fast alle Fälle der in der Ingenieurpraxis auftretenden Belastungen umfassen. Die vorgeschlagenen Lösungen geben die Möglichkeit leichter Aufschreibung im Form eines Algorithmus, das die Ausnutzung von Komputertechnik in statischen Berechnungen ermöglicht. Am Ende des Referates werden die Zahlebeispiele dargestellt, die die Möglichkeiten praktischer Anwendungen der besprochenen Funktionen darstellen. KW - Balken KW - Belastung KW - Mathematisches Modell KW - Computerunterstütztes Verfahren Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5308 ER - TY - JOUR A1 - Chang, Chihyuan A1 - Chang, Yuanchu A1 - Huang, Shyhmeng T1 - Application of a Agent Mechanism to the Small-scale Maintenance of School Buildings N2 - This paper presents an agent-based software, Virtual Administrator System (VAS) for the smallscale maintenance of school buildings. VAS is capable of handling a heavy load of routine, lowtech maintenance jobs. It assigns a different priority to each job application according to its significance and urgency, and automatically adjusts schedules for maintenance engineers when on-site supervision is needed. The system can help ease off the burden of routine small-scale maintenance work, making it more cost-effective and efficient in the overall management of school building maintenance. VAS posts jobs on the Web in a multi-media format and classified all applications into four categories: the on-call maintenance contract, the term maintenance contract, the guaranty maintenance contract, and the regular maintenance contract. It then estimates their urgency level and passes the information to maintenance engineers who will decide whether on-site inspection is needed. Based on the engineers’ feedback, VAS automatically implements the scheduling for inspection as well as sends out real-time or batch notifications to contractors. All these activities are recorded in a database to allow continuous research and data mining and the analysis and diagnosis of specific jobs for followup maintenance plans. KW - Mehragentensystem KW - Lernendes System KW - Schulgebäude KW - Facility-Management Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2165 ER - TY - JOUR A1 - Most, Thomas A1 - Eckardt, Stefan T1 - Application of a hybrid parallelization technique to accelerate the numerical simulation of nonlinear mechanical problems N2 - This paper presents the combination of two different parallelization environments, OpenMP and MPI, in one numerical simulation tool. The computation of the system matrices and vectors is parallelized with OpenMP and the solution of the system of equations is done with the MPIbased solver MUMPS. The efficiency of both algorithms is shown on several linear and nonlinear examples using the Finite Element Method and a meshless discretization technique. KW - Framework KW - API KW - Parallelverarbeitung KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2599 ER - TY - JOUR A1 - Lizarazu, Jorge A1 - Harirchian, Ehsan A1 - Shaik, Umar Arif A1 - Shareef, Mohammed A1 - Antoni-Zdziobek, Annie A1 - Lahmer, Tom T1 - Application of machine learning-based algorithms to predict the stress-strain curves of additively manufactured mild steel out of its microstructural characteristics JF - Results in Engineering N2 - The study presents a Machine Learning (ML)-based framework designed to forecast the stress-strain relationship of arc-direct energy deposited mild steel. Based on microstructural characteristics previously extracted using microscopy and X-ray diffraction, approximately 1000 new parameter sets are generated by applying the Latin Hypercube Sampling Method (LHSM). For each parameter set, a Representative Volume Element (RVE) is synthetically created via Voronoi Tessellation. Input raw data for ML-based algorithms comprises these parameter sets or RVE-images, while output raw data includes their corresponding stress-strain relationships calculated after a Finite Element (FE) procedure. Input data undergoes preprocessing involving standardization, feature selection, and image resizing. Similarly, the stress-strain curves, initially unsuitable for training traditional ML algorithms, are preprocessed using cubic splines and occasionally Principal Component Analysis (PCA). The later part of the study focuses on employing multiple ML algorithms, utilizing two main models. The first model predicts stress-strain curves based on microstructural parameters, while the second model does so solely from RVE images. The most accurate prediction yields a Root Mean Squared Error of around 5 MPa, approximately 1% of the yield stress. This outcome suggests that ML models offer precise and efficient methods for characterizing dual-phase steels, establishing a framework for accurate results in material analysis. KW - Maschinelles Lernen KW - Baustahl KW - Spannungs-Dehnungs-Beziehung KW - Arc-direct energy deposition KW - Mild steel KW - Dual phase steel KW - Stress-strain curve KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231207-65028 UR - https://www.sciencedirect.com/science/article/pii/S2590123023007144 VL - 2023 IS - Volume 20 (2023) SP - 1 EP - 12 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Melnikov, B. E. A1 - Semenov, Artem T1 - Application of Multimodel Method of Elasto-Plastic Analysis for the Multilevel Computation of Structures N2 - Creation of hierarchical sequence of the plastic and viscoplastic models according to different levels of structure approximations is considered. Developed strategy of multimodel analysis, which consists of creation of the inelastic models library, determination of selection criteria system and caring out of multivariant sequential clarifying computations, is described. Application of the multimodel approach in numerical computations has demonstrated possibility of reliable prediction of stress-strain response under wide variety of combined nonproportional loading. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Elastoplastizität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2487 ER - TY - JOUR A1 - Harirchian, Ehsan A1 - Lahmer, Tom A1 - Kumari, Vandana A1 - Jadhav, Kirti T1 - Application of Support Vector Machine Modeling for the Rapid Seismic Hazard Safety Evaluation of Existing Buildings JF - Energies N2 - The economic losses from earthquakes tend to hit the national economy considerably; therefore, models that are capable of estimating the vulnerability and losses of future earthquakes are highly consequential for emergency planners with the purpose of risk mitigation. This demands a mass prioritization filtering of structures to identify vulnerable buildings for retrofitting purposes. The application of advanced structural analysis on each building to study the earthquake response is impractical due to complex calculations, long computational time, and exorbitant cost. This exhibits the need for a fast, reliable, and rapid method, commonly known as Rapid Visual Screening (RVS). The method serves as a preliminary screening platform, using an optimum number of seismic parameters of the structure and predefined output damage states. In this study, the efficacy of the Machine Learning (ML) application in damage prediction through a Support Vector Machine (SVM) model as the damage classification technique has been investigated. The developed model was trained and examined based on damage data from the 1999 Düzce Earthquake in Turkey, where the building’s data consists of 22 performance modifiers that have been implemented with supervised machine learning. KW - Erdbeben KW - Maschinelles Lernen KW - earthquake vulnerability assessment KW - rapid visual screening KW - machine learning KW - support vector machine KW - buildings KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200707-41915 UR - https://www.mdpi.com/1996-1073/13/13/3340 VL - 2020 IS - volume 13, issue 13, 3340 PB - MDPI CY - Basel ER - TY - JOUR A1 - Fitzsimons, J. Kent T1 - Architectural form and the body "impropre" : the Stone House at Tavole N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,4/93-99 KW - Herzog und de Meuron KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080304-13295 ER - TY - JOUR A1 - Watson, Victoria T1 - Architecture and Air N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,4/61-66 KW - Architektur KW - Raum KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080304-13378 ER - TY - JOUR A1 - Karatani, Kojin T1 - Architecture and association N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,3/23-26 KW - Architekturtheorie KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080304-13193 ER - TY - JOUR A1 - Picon, Antoine T1 - Architecture and the virtual : towards a new materiality? N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,3/107-111 KW - Architektur KW - CAD KW - Virtuelle Realität KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080227-13031 ER - TY - JOUR A1 - Lavin, Sylvia T1 - Architecture Anim´e or Medium Specificity in a Post-Medium World N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/19 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080814-13929 ER - TY - JOUR A1 - Tilder, Lisa T1 - Architecture as interface : mediating the In-Between N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,4/131-136 KW - Architektur KW - Neue Medien KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080318-13480 ER - TY - JOUR A1 - Ito, Toyo T1 - Architecture for virtual and natural bodies N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,1-2/129-133 KW - Ito KW - Toyoo KW - Architektur KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11511 ER - TY - JOUR A1 - Kavanaugh, Leslie T1 - Architecture in the Age of Digital Representation N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/27 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080814-14000 ER - TY - JOUR A1 - Rocker, Ingeborg M. T1 - Architecture of the Digital Realm: Experimentations by Peter Eisenman, Frank O. Gehry N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/34 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080815-14067 ER - TY - JOUR A1 - Lieberman, Oren T1 - Architecture's fiction : the White Space of technologies' insinuations N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,1-2/239-242 KW - Architektur KW - Technologie KW - Fiction KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11796 ER - TY - JOUR A1 - Wirth, Hermann T1 - Architektonischer Historismus in der Gegenwart - schöpferischer Impuls oder regressive Tendenz? N2 - Wissenschaftliches Kolloquium vom 5. bis 7. Juli 1983 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Das Bauhauserbe und die gegenwärtige Entwicklung der Architektur : zum 100. Geburtstag von Walter Gropius' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 29.1983,5-6/459-462 KW - Denkmalpflege KW - Innenstadt KW - Großtafelbau KW - Bauhaus-Kolloquium KW - Weimar KW - 1983 Y1 - 1983 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-9655 ER - TY - JOUR A1 - Laudel, Heidrun T1 - Architektur im Zwiespalt zwischen Demokratieanspruch und Staatsrepräsentation - das Beispiel Semper N2 - Wissenschaftliches Kolloquium vom 18. bis 21. Juni 1992 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Architektur und Macht’ T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 39.1993,1-2/81-86 KW - Semper KW - Gottfried KW - Architektur KW - Macht KW - Bauhaus-Kolloquium KW - Weimar KW - 1992 Y1 - 1993 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11283 ER - TY - JOUR A1 - Schädlich, Christian T1 - Architektur und Epoche 1789 - 1917 - 1989 N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 36.1990,1-3/7-11 KW - Architektur KW - Moderne KW - Industrialisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 1989 Y1 - 1990 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11028 ER - TY - JOUR A1 - Zimmermann, Gerd A1 - Korrek, Norbert T1 - Architektur und Macht : 6. Internationales Bauhaus-Kolloquium Weimar 1992, 18.6.-21.6.1992 N2 - Wissenschaftliches Kolloquium vom 18. bis 21. Juni 1992 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Architektur und Macht' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 38.1992,5-6/205-206 KW - Bauhaus KW - Architekturtheorie KW - Kongress KW - Bauhaus-Kolloquium KW - Weimar KW - 1992 Y1 - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11249 ER - TY - JOUR A1 - Sattler, Felix T1 - Architektur und Performativ : Das Fernsehbild der Freiheitsstatue am 11. September 2001 N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/41 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080815-14128 ER - TY - JOUR A1 - Nenow, Nikolai T1 - Architektur, Kybernetik und die Gesetze der Schönheit N2 - Wissenschaftliches Kolloquium vom 24. bis 26. Juni 1986 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Der wissenschaftlich-technische Fortschritt und die sozial-kulturellen Funktionen von Architektur und industrieller Formgestaltung in unserer Epoche' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 33.1987,4-6/266-268 KW - Architektur KW - Selbstorganisation KW - Bauhaus-Kolloquium KW - Weimar KW - 1986 Y1 - 1987 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10419 ER - TY - JOUR A1 - Zimmermann, Gerd T1 - Architekturen der Macht N2 - Wissenschaftliches Kolloquium vom 18. bis 21. Juni 1992 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Architektur und Macht' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 38.1992,5-6/213-220 KW - Architektur KW - Macht KW - Bauhaus-Kolloquium KW - Weimar KW - 1992 Y1 - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11164 ER - TY - JOUR A1 - Seel, Martin T1 - Architekturen des Films N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/12 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080729-13834 ER - TY - JOUR A1 - Grönwald, Bernd T1 - Architekturfortschritt heute und für morgen N2 - Wissenschaftliches Kolloquium vom 5. bis 7. Juli 1983 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Das Bauhauserbe und die gegenwärtige Entwicklung der Architektur : zum 100. Geburtstag von Walter Gropius' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 29.1983,5-6/351-355 KW - Architektur KW - Fortschritt KW - Bauhaus-Kolloquium KW - Weimar KW - 1983 Y1 - 1983 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-9681 ER - TY - JOUR A1 - Petsch, Joachim T1 - Architekturströmungen der Gegenwart in der Bundesrepublik Deutschland am Beispiel der Bundeshauptstadt Bonn N2 - Wissenschaftliches Kolloquium vom 24. bis 26. Juni 1986 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: 'Der wissenschaftlich-technische Fortschritt und die sozial-kulturellen Funktionen von Architektur und industrieller Formgestaltung in unserer Epoche' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 33.1987,4-6/320-324 KW - Deutschland KW - Berlin KW - Architektur KW - Bauhaus-Kolloquium KW - Weimar KW - 1986 Y1 - 1987 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-10091 ER - TY - JOUR A1 - Hassenewert, Frank T1 - Architekturvorstellungen im Science-Fiction-Film N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,3-4/341-344 KW - Science-Fiction-Film KW - Architektur KW - Filmarchitektur KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11972 ER - TY - JOUR A1 - Leitner, Birgit Maria T1 - Architécture: Jaques Tatis "Playtime" (1967) N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/45 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080815-14165 ER - TY - JOUR A1 - Müller, Ernst T1 - Archivdokumente über das Staatliche Bauhaus im Staatsarchiv Weimar N2 - Wissenschaftliches Kolloquium vom 27. bis 29. Juni 1979 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: '60 Jahre Gründung Bauhaus' T3 - Wissenschaftliche Zeitschrift / Hochschule für Architektur und Bauwesen - 26.1979,4-5/438-440 KW - Weimar / Bauhaus KW - Weimar / Thüringisches Hauptstaatsarchiv KW - Dokument KW - Bauhaus-Kolloquium KW - Weimar KW - 1979 Y1 - 1979 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-9015 ER - TY - JOUR A1 - Graafland, Arie T1 - Artificiality in the work of Rem Koolhaas N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,1-2/109-119 KW - Koolhaas KW - Rem KW - Architektur KW - Ästhetik KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11781 ER - TY - JOUR A1 - Wiesing, Lambert T1 - Artifizielle Präsenz und Architektur N2 - Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild' T3 - Schriften der Bauhaus-Universität Weimar - 120/04 KW - Architektur KW - Design KW - Raum KW - Bild KW - Digitalisierung KW - Bauhaus-Kolloquium KW - Weimar KW - 2007 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080729-13752 ER -