TY - THES A1 - Smirnova, Elena T1 - "Kennst du das Land, wo blüht Oranienbaum?" - A Case Study on Strategic and Territorial Planning in St. Petersburg (Russia) N2 - The research examines the system of strategic and territorial planning of St. Petersburg focusing on Lomonosov (Oranienbaum) as its case study. The study provides the analysis of the planning documentation developed for the city in the post-Soviet period. In particular, it elaborates on the currently enforced Strategy of Economic and Social Development of St. Petersburg-2030 (2014) and the City General Plan (2005), discussing the aspects of their development and implementation, as well as complex interrelation. Thereby, peculiarities of the spatial development of the St. Petersburg agglomeration are also investigated, elaborating on the state policy on agglomerations, historic development of St. Petersburg and relations with the Leningrad Region, governance and imbalances of the St. Petersburg spatial development, including proposed development scenarios. Consequently, the study employs a highly indicative case of the Lomonosov town municipal unit aiming to illustrate the practical implementation of administrative, territorial and strategic policies in a given context within a system of the state planning adopted in St. Petersburg, in particular, taking into consideration recently proclaimed necessity for the transition to a polycentric city model following an innovative scenario for the socioeconomic and spatial development. In particular, Lomonosov (Oranienbaum) is explored egarding its current socio-economic situation and development scenarios: industrial site and cultural tourism. The Oranienbaum museum and nature-reserve is also thoroughly assessed with regard to its cultural tourism potential. Finally, the urban environment of Lomonosov (Oranienbaum) is comprehensively scrutinized in terms of its historic development, residential housing typology, UNESCO World Heritage preservation and local urban heritage. In conclusion, the data on Lomonosov present in the St. Petersburg strategic and territorial planning documents is provided. KW - Lomonossow KW - Oranienbaum KW - Regionalplanung KW - Stadtentwicklung KW - Lomonosov KW - strategic and territorial planning KW - urban development strategies KW - General Plan Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170711-32556 ER - TY - RPRT A1 - Smarsly, Kay A1 - Wiggenbrock, Jens T1 - Automatisierte Planung von digitalen Hochgeschwindigkeitsnetzen N2 - Der Ausbau von digitalen Hochgeschwindigkeitsnetzen ist gekennzeichnet durch neuartige Anforderungen an den Planungsprozess. Diese Anforderungen erfordern wiederum den Einsatz von neuartigen Paradigmen, die eine effiziente und zugleich genaue Planung von flächendeckenden Glasfasernetzen ermöglichen. Hierbei können wiederkehrende Planungsaufgaben durch eine gezielte computergestützte Automatisierung effizienter und genauer ausgeführt, als es mit bisherigen Planungskonzepten möglich ist. Dieses Arbeitspapier beschreibt die computergestützte Ausführung eines Planungsprozesses auf Basis von fünf grundlegenden, iterativen Planungsschritten und gibt Empfehlungen für eine effiziente und genaue Planung von Glasfasernetzen. Der hier vorgestellte Ansatz ermöglicht es Netzbetreibern und Investoren, den Ausbau beliebiger Siedlungs- und Gewerbegebiete auf der zuverlässigen Basis von belastbarem Faktenwissen wirtschaftlich zu priorisieren. KW - Kostenoptimierung KW - Breitbandausbau KW - Gigabit KW - Planung KW - FTTx KW - 5G KW - Visualisierung KW - Infrastruktur KW - Glasfaser KW - Hochgeschwindigkeitsnetz Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170828-33095 ER - TY - INPR A1 - Simon-Ritz, Frank A1 - Rudolf, Sylvelin T1 - Ein Schaufenster für die Kunst N2 - Kunstausstellungen in Bibliotheken KW - Ausstellung KW - Kunstausstellung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170711-32307 N1 - This is the pre-peer reviewed version of the following article: https://zs.thulb.uni-jena.de/receive/jportal_jparticle_01036154 VL - 69 IS - Heft 6 SP - 312 EP - 317 ER - TY - CHAP A1 - Schütz, Stephan T1 - Folded Cardboard Sandwiches for Load-bearing Architectural Components T2 - WSBE17 Hong Kong - Conference Proceedings N2 - The high resource demand of the building sector clearly indicates the need to search for alternative, renewable and energy-efficient materials. This work presents paper-laminated sandwich elements with a core of corrugated paperboard that can serve as architectural components with a load-bearing capacity after a linear folding process. Conventional methods either use paper tubes or glued layers of honeycomb panels. In contrast, the folded components are extremely lightweight, provide the material strength exactly where it is statically required and offer many possibilities for design variants. After removing stripes of the paper lamination, the sandwich can be folded in a linear way at this position. Without the resistance of the missing paper, the sandwich core can be easily compressed. The final angle of the folding correlates with the width of the removed paper stripe. As such, this angle can be described by a simple geometric equation. The geometrical basis for the production of folded sandwich elements was established and many profile types were generated such as triangular, square or rectangular shapes. The method allows the easy planning and fast production of components that can be used in the construction sector. A triangle profile was used to create a load-bearing frame as supporting structure for an experimental building. This first permanent building completely made of corrugated cardboard was evaluated in a two-year test to confirm the efficiency of the developed components. In addition to the frame shown in this paper, large-scale sandwich elements with a core of folded components can be used to fabricate lightweight ceilings and large-scale sandwich components. The method enables the efficient production of linearly folded cardboard elements which can replace normal wooden components like beams, pillars or frames and bring a fully recycled material in the context of architectural construction. KW - Tragendes Teil KW - Platte KW - Sandwichbauteil KW - Papierware KW - Wellpappe KW - Sustainable construction technology KW - Adaptable design KW - Folded components KW - Corrugated cardboard sandwich KW - Architecture Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181029-38052 UR - http://www.wsbe17hongkong.hk/download/WSBE17%20Hong%20Kong%20-%20Conference%20Proceedings.pdf SN - 978-988-77943-0-1 PB - Construction Industry Council, Hong Kong Green Building Council Limited CY - Hong Kong ER - TY - THES A1 - Schwedler, Michael T1 - Integrated structural analysis using isogeometric finite element methods N2 - The gradual digitization in the architecture, engineering, and construction industry over the past fifty years led to an extremely heterogeneous software environment, which today is embodied by the multitude of different digital tools and proprietary data formats used by the many specialists contributing to the design process in a construction project. Though these projects become increasingly complex, the demands on financial efficiency and the completion within a tight schedule grow at the same time. The digital collaboration of project partners has been identified as one key issue in successfully dealing with these challenges. Yet currently, the numerous software applications and their respective individual views on the design process severely impede that collaboration. An approach to establish a unified basis for the digital collaboration, regardless of the existing software heterogeneity, is a comprehensive digital building model contributed to by all projects partners. This type of data management known as building information modeling (BIM) has many benefits, yet its adoption is associated with many difficulties and thus, proceeds only slowly. One aspect in the field of conflicting requirements on such a digital model is the cooperation of architects and structural engineers. Traditionally, these two disciplines use different abstractions of reality for their models that in consequence lead to incompatible digital representations thereof. The onset of isogeometric analysis (IGA) promised to ease the discrepancy in design and analysis model representations. Yet, that initial focus quickly shifted towards using these methods as a more powerful basis for numerical simulations. Furthermore, the isogeometric representation alone is not capable of solving the model abstraction problem. It is thus the intention of this work to contribute to an improved digital collaboration of architects and engineers by exploring an integrated analysis approach on the basis of an unified digital model and solid geometry expressed by splines. In the course of this work, an analysis framework is developed that utilizes such models to automatically conduct numerical simulations commonly required in construction projects. In essence, this allows to retrieve structural analysis results from BIM models in a fast and simple manner, thereby facilitating rapid design iterations and profound design feedback. The BIM implementation Industry Foundation Classes (IFC) is reviewed with regard to its capabilities of representing the unified model. The current IFC schema strongly supports the use of redundant model data, a major pitfall in digital collaboration. Additionally, it does not allow to describe the geometry by volumetric splines. As the pursued approach builds upon a unique model for both, architectural and structural design, and furthermore requires solid geometry, necessary schema modifications are suggested. Structural entities are modeled by volumetric NURBS patches, each of which constitutes an individual subdomain that, with regard to the analysis, is incompatible with the remaining full model. The resulting consequences for numerical simulation are elaborated in this work. The individual subdomains have to be weakly coupled, for which the mortar method is used. Different approaches to discretize the interface traction fields are implemented and their respective impact on the analysis results is evaluated. All necessary coupling conditions are automatically derived from the related geometry model. The weak coupling procedure leads to a linear system of equations in saddle point form, which, owed to the volumetric modeling, is large in size and, the associated coefficient matrix has, due to the use of higher degree basis functions, a high bandwidth. The peculiarities of the system require adapted solution methods that generally cause higher numerical costs than the standard procedures for symmetric, positive-definite systems do. Different methods to solve the specific system are investigated and an efficient parallel algorithm is finally proposed. When the structural analysis model is derived from the unified model in the BIM data, it does in general initially not meet the requirements on the discretization that are necessary to obtain sufficiently accurate analysis results. The consequently necessary patch refinements must be controlled automatically to allowfor an entirely automatic analysis procedure. For that purpose, an empirical refinement scheme based on the geometrical and possibly mechanical properties of the specific entities is proposed. The level of refinement may be selectively manipulated by the structural engineer in charge. Furthermore, a Zienkiewicz-Zhu type error estimator is adapted for the use with isogeometric analysis results. It is shown that also this estimator can be used to steer an adaptive refinement procedure. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2016,2 KW - Finite-Elemente-Methode KW - NURBS KW - Isogeometrische Analyse KW - finite element method KW - isogeometric analysis KW - mortar method KW - building information modelling Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170130-27372 ER - TY - JOUR A1 - Schuch, Kai A1 - Kaps, Christian T1 - Reifungs- und Strukturbildungsprozesse bei Bindern mit wässrigen Alkalisilikat-Lösungen N2 - Durch Reifungs- und Strukturbildungsprozesse kann es bei silikatischen und alumosilikatischen Bindern zu Rissbildung bei behinderter Verformung, Festigkeitsverlust und somit Verlust der Dauerhaftigkeit kommen. Die Bewertung dieser Prozesse erfolgt an silikatischen Materialien mit einem Ausblick auf die alumosilikatischen Binder. KW - Alkalisilikat KW - Wasserglas KW - Bindemittel KW - Silikat KW - Wasserglas KW - Reifungsprozess KW - Strukturbildungsprozess KW - Alumosilikat KW - Silikat Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170728-32682 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/3267 SP - 1 EP - 17 ER - TY - JOUR A1 - Schuch, Kai A1 - Kaps, Christian T1 - Reifungs- und Strukturbildungsprozesse bei Bindern mit wässrigen Alkalisilikat-Lösungen N2 - Durch Reifungs- und Strukturbildungsprozesse kann es bei silikatischen und alumosilikatischen Bindern zu Rissbildung bei behinderter Verformung, Festigkeitsverlust und somit Verlust der Dauerhaftigkeit kommen. Die Bewertung dieser Prozesse erfolgt an silikatischen Materialien mit einem Ausblick auf die alumosilikatischen Binder KW - Alkalisilikat KW - Wasserglas KW - Bindemittel KW - Silikat KW - Wasserglas KW - Reifungsprozess KW - Strukturbildungsprozess KW - Alumosilikat KW - Silikat Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170718-32675 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/3268 SP - 1 EP - 17 ER - TY - JOUR A1 - Schuch, Kai A1 - Kaps, Christian T1 - Maturation and Structure Formation Processes in Binders with Aqueous Alkali-Silicate Solutions N2 - Maturation and structure formation processes can lead to crack formation in silicate and aluminosilicate binders (e.g. for coating materials...) through restricted deformation, loss of strength and thus to loss of durability. These processes are evaluated with silicate materials with an outlook on aluminosilicate binders. KW - Waterglass KW - Silicate KW - Aluminosilicate KW - Geopolymer KW - Alkalisilicate KW - Aggregation KW - Geopolymer KW - Aluminosilicate KW - Coating Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170907-35979 N1 - First published in german language 28.07.2017 SP - 1 EP - 16 ER - TY - THES A1 - Romallosa, Aries Roda D. T1 - Briquette Production By The Informal Sector: The Case of UCLA in Iloilo City, Philippines N2 - The construction and operation of a sanitary landfill (SLF) in the Philippines presents concerns on the regulation of the activities of the informal sector in the area. In anticipation of these directives, an association of informal waste reclaimers group called Uswag Calajunan Livelihood Association, Inc. (UCLA) was formed in May 2009. One option identified was the waste-to-energy activity through the production of fuel briquettes. With the availability of raw materials in the area, what was lacking then was an appropriate technology that would cater to their needs. This study, therefore, presented the case of UCLA on how socio-economic and technical aspects was integrated for the development and improvement of a briquetting technology needed in the production of quality briquettes as part of their income generating activities. A non-experimental posttest only design was utilized for the collection of descriptive information. Descriptions and discussions were also made on the enhancement of the briquetting machine from the first hand-press molder developed until the finalized design was attained. Results revealed that the improved briquetting technology withstood the wear and tear of operation showing a significant (P<0.01) increase on the production rate (220 pcs/hr; 4 kg/hr) and bulk density (444.83 kg/m3) of briquettes produced. The quality of cylindrical briquettes produced in terms of bulk density, heating value (15.13 MJ/kg), moisture (6.2%), N and S closely met or has met the requirements of DIN 51731. Based on the operating expenses, the briquettes may be marked-up to Php0.25/pc (USD0.006) or Php15.00/kg (USD0.34) for profit generation. The potential daily earnings of Php130.00 (USD2.95) to Php288.56 (USD6.56) generated in producing briquettes are higher when compared to the majority of waste reclaimers’ daily income of Php124.00 (USD2.82). The high positive response (93%) on the usability of briquettes and the willingness of the respondents (81%) to buy them when sold in the market indicates its promising potential as fuel in the nearby communities. Results of briquette production citing the case of UCLA could be considered as potential source of income given the social, technical, economic and environmental feasibility of the experiment. This method of utilizing wastes in an urban setting of a developing country with similar socio-economic and physical set-ups may also be recommended for testing or replication. KW - Biotechnologie KW - Briquette Production KW - Briquetting KW - Biomass KW - Informal Sector KW - Resource Management KW - Developing Countries KW - Biomass Technology KW - Waste to Energy KW - Biomasse KW - Brikettierung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170620-32335 ER - TY - THES A1 - Podlaszewska, Rizky Suci Ammalia T1 - The Placemaking of Destination. Localization and Commoditization process of Urban Tourism. Study case Palembang Indonesia N2 - This research addresses the discourse of tourism as a tool for place-making of urban destination. Relevant to the study of place-making is the analysis of the commoditization and localization process dependent upon the appropriation of urban landscape and local cultures. In the research, localization is interpreted as the act of determining the attributes of locality, while commoditization is defined as the process by which local attributes that have commercial potential end up in becoming tourism commodity. Following this, the commoditization of intrinsic cultural value is disseminated within a branding strategy and intervention reflecting social and political relations. Therefore, the research suggests that tourism place-making has not only been constructed through the top-down regulatory body, but has been also generated through the attributes of its locality. By utilizing the critical and constructivist paradigm, the research depicts the conditions of the localization and commoditization process in establishing the base line of its realization within the symbolic economy. Thus, a qualitative case study approach was adopted. The study area of this dissertation is Palembang, as one of the capital cities in Indonesia advancing in its overall urban development. To investigate urban tourism as a tool for development strategy, it is useful to investigate the role of tourism which embodies (1) spatial transformation; how tourism gives significant impacts on urban form, and (2) the socio-cultural aspect; how neighbourhood is related to tourism industry. The findings suggest that tourism place-making involves the reciprocity of urban dynamics: cities take on tourism as a reference model of development, and tourist areas adopt the proliferation of cultural lifestyle to meet the industry’s demands. KW - Urbanistik Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20171201-36995 ER -