TY - BOOK ED - Hildebrand, Jörg ED - Loose, Tobias ED - Sakkiettibutra, Jens ED - Brand, Marcus T1 - Simulationsforum 2013 - Schweißen und Wärmebehandlung N2 - Das Buch veröffentlicht 22 Fachbeiträge der Konferenz "Simulationsforum 2013 - Schweißen und Wärmebehandlung". KW - Schweißen KW - Wärmebehandlung KW - Simulation KW - Stahl KW - Modellierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140512-21820 SN - 978-3-00-045902-3 PB - Förderverein Wärmebehandlung und Schweißen e.V. CY - Weimar ER - TY - JOUR A1 - Adamatzky, Andrew A1 - Schubert, Theresa T1 - Slime mold microfluidic logical gates JF - Materials Today N2 - We demonstrate how logical operations can be implemented in ensembles of protoplasmic tubes of acellular slime mold Physarum polycephalum. The tactile response of the protoplasmic tubes is used to actuate analogs of two- and four-input logical gates and memory devices. The slime mold tube logical gates display results of logical operations by blocking flow in mechanically stimulated tube fragments and redirecting the flow to output tube fragments. We demonstrate how XOR and NOR gates are constructed. We also exemplify circuits of hybrid gates and a memory device. The slime mold based gates are non-electronic, simple and inexpensive, and several gates can be realized simultaneously at sites where protoplasmic tubes merge. KW - Physarum polycephalum KW - protoplasmic tubes, Nucleolus-Organisator-Region Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170413-31168 SP - 86 EP - 91 ER - TY - THES A1 - Chilingaryan, Naira T1 - Industrial Heritage: In-Between Memory and Transformation N2 - Exploratory Research into Transformation Processes of Former Industrial Complexes of Leipziger Baumwollspinnerei (Leipzig) and Mattatoio di Testaccio (Rome); New Meanings of Industrial Heritage Physical manifestations of the Industrial Revolution left a permanent imprint on the complexion of cities. Abandonment that followed the deindustrialization contributed to an estrangement, turning derelict industrial spaces and run‐down factories into a ballast to conjure with. At present, industrial heritage management applies flexibility and creativity, partially overcoming the essentially traditional paradigm of heritage preservation. This approach permits sustainable conservation – utilization and integration of disused industrial constructs in the contemporary urban landscape. Being a part of the European cultural stock, industrial heritage is an exciting and unique setting from many perspectives. It is defined and consumed by many markets, ranging from the industrial heritage tourism to the market of special events and festivals. Reused industrial buildings and factories come into view as products of post‐industrial societies, fitting to the Western post‐industrial (consumer) culture, offering a field of activities that are at an interface between the industrial history and contemporary socio‐cultural milieu. Alteration of values, growth of new roles and definitions of industrial heritage, generated by functional restructuring, is a subject which is often left behind the general discussion about sustainable conservation and adaptive reuse of industrial heritage. Yet, in the modified state, industrial heritage is very complex to understand and to define. By conducting a desk and a case study research of former industrial complexes – Leipziger Baumwollspinnerei and Mattatoio di Testaccio, this doctoral thesis aims to identify industrial heritage as a contemporary (post‐industrial) concept. Observation of ideas, values and definitions that emerge as a consequence of the transformation and re‐conceptualization of industrial heritage are intended to raise awareness and appreciation of industrial heritage in the full richness of its contemporary interpretation. KW - Denkmal KW - industrial heritage KW - Nutzungsänderung KW - Industrie KW - Kultur KW - Transformation KW - Wahrnehmung KW - environmental perception KW - adaptive reuse KW - sustainable conservation KW - representation KW - built environment Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140624-22291 ER - TY - THES A1 - Hildebrandt, Paula Marie T1 - Staubaufwirbeln oder die Kunst der Partizipation N2 - Die Dissertation Staubaufwirbeln oder die Kunst der Partizipation stellt die Frage, ob und inwiefern künstlerische Interventionen zur Aktualisierung und Entwicklung demokratischer Teilhabe beitragen können. Im Zentrum der Untersuchung stehen sechs Projektgruppen, die experimentelle Freiräume gestalten, in denen neue Formen von Demokratielernen, Stadtnutzung, gesellschaftlicher Repräsentation und Symbolpolitik erprobt werden. Die Kunst der Partizipation wird in fünf Dimensionen beschrieben: Initiative, Kollektivität, Inszenierung, Öffentlichkeit und Kooperation. Sie erweitert damit das Repertoire demokratischer Beteiligungsformen sowie gegenwärtige Kunstbegriffe. Ihre heimliche Relevanz besteht darin, sich immer wieder dem Risiko auszusetzen, von allen Seiten als unzureichend betrachtet zu werden. Demokratie konstituiert sich hier als ästhetische Erfahrung. Die Kunst besteht darin, die Flüchtigkeit demokratischer Teilhabe erfahrbar zu machen, also gestaltbar und veränderbar. KW - Stadt KW - Kunst KW - Partizipation KW - Demokratie KW - Öffentlichkeit Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140410-21589 ER - TY - THES A1 - Kalugila, Shubira T1 - HOUSING INTERVENTIONS AND ITS INFLUENCE ON URBAN DEVELOPMENT: Opportunities and Challenges in Mixed Informal Settlements, in Dar es Salaam - Tanzania N2 - Rapid urbanisation that is not accompanied by socio-economic development strains the capacity of local and national governments to provide even basic services such as shelter. Informal settlements i.e. settlements not built or developed according to the formal regulations have become a solution to many urban dwellers in developing countries. In Tanzania informal settlements accommodate people from low, middle and high income groups. The study explores the nature of potentials and challenges posed by the existence of mixed socio-economic groups in informal settlements, including an assessment of what can be done to optimise utilisation of potentials and mitigation of conflicts. Using a case study strategy, the study was conducted in Dar es Salaam city focusing on Makongo mixed informal settlement. The results show that mixed informal settlements are as a result of several factors including uncoordinated energies of people. The urban development forces that bring change in the development of the city are stronger than the public states capacity to coordinate and manage them. Informal settlements also offer user-friendly land tenure, flexibility in house construction and proximity to livelihoods. Other factors include the nature of socio-economic living patterns and extension of urban boundaries. Community members operate using social norms. Advantages of mixed informal settlements include availability of plots according to needs and affordability while a disadvantage is, people of different socio-economic groups perceive problems differently. For policies to be effective, their formulation should be derived from what is happening on the ground i.e. addressing informal settlements according to their heterogeneity. Moreover, empowered local authorities can assist in implementing national development plans; also actors in land development including government institutions, non-governmental institutions, financial institutions, private sector, professionals, political leaders, research institutions, policy-makers and training institutions need to recognise, understand and respect each other’s roles, and pull resources together to minimise problems related to informality in land development; utilise potentials and minimise challenges in mixed informal settlements in Dar es Salaam. Key words: Informal settlements, land development, urbanisation KW - Informal Settlements KW - Land development KW - Verstädterung KW - Urbanität KW - Urbanisation KW - Landentwicklung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140902-22930 ER - TY - GEN A1 - Garisch, Mathias A1 - Kutzner, Eva A1 - Oehler, Vanessa A1 - Patzer, Nicole A1 - Schmeing, Carolin T1 - Analyse von Terminplänen N2 - Das Bachelorprojekt „Analyse von Terminplänen“ beschäftigt sich mit der Analyse der Abhängigkeiten zwischen den unterschiedlichen Vorgängen des Bauablaufs. Die Problematik in der Terminplanerstellung liegt darin, dass ein Terminplan nicht alle Hintergrundinformationen abbildet und es daher zu Projektverzögerungen und Absprachefehlern kommen kann. Dieses Bachelorprojekt macht Gebrauch von bereits aufbereiteten Informationen zur genannten Problematik in Form eines vorangegangen Bachelorprojekts und eines Masterprojekts, sowie einer Umfrage des Instituts für Bauwirtschaft der Universität Kassel. In diesem Projekt werden 50 neue und 100 bereits existierende Terminpläne von diversen Unternehmen aus ganz Deutschland analysiert und ausgewertet. Die Analyse der Terminpläne basiert auf geführten Experteninterviews. Das Interview berücksichtigt Faktoren wie zum Beispiel Darstellungsformen, Detaillierungsgrade, Abhängigkeiten, Vorgangsdauern oder Planungsgrundlagen. Durch die Befragung von möglichst vielen Firmen konnte festgestellt werden, dass jeder Terminplanentwickler eine Vorgehensweise entwickelt, nach welcher er arbeitet. Außerdem ist in den Gesprächen deutlich geworden, dass das Theorie- Praxis-Gefälle sehr groß ist. Das heißt, dass theoretische Modelle aus der Ausbildung an beispielsweise Hochschulen, in der Praxis heutzutage wenig angewandt werden. Nach der Analyse der Terminpläne und Auswertung der Interviews, werden die Daten in eine vom vorangehenden Masterprojekt erstellte Excel-Tabelle eingepflegt. Die vorhandenen Informationen werden dann anhand verschiedenster Diagramme verglichen und ausgewertet. KW - Analyse KW - Planung KW - Abhängigkeit KW - Bau KW - Terminplan KW - Analyse KW - Abhängigkeiten KW - Vorgang Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140317-21392 ER - TY - THES A1 - Dang, Trang T1 - Automated Detailing of 4D Schedules N2 - The increasing success of BIM (Building Information Model) and the emergence of its implementation in 3D construction models have paved a way for improving scheduling process. The recent research on application of BIM in scheduling has focused on quantity take-off, duration estimation for individual trades, schedule visualization, and clash detection. Several experiments indicated that the lack of detailed planning causes about 30% non-productive time and stacking of trades. However, detailed planning still has not been implemented in practice despite receiving a lot of interest from researchers. The reason is associated with the huge amount and complexity of input data. In order to create a detailed planning, it is time consuming to manually decompose activities, collect and calculate the detailed information in relevant. Moreover, the coordination of detailed activities requires much effort for dealing with their complex constraints. This dissertation aims to support the generation of detailed schedules from a rough schedule. It proposes a model for automated detailing of 4D schedules by integrating BIM, simulation and Pareto-based optimization. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 32 KW - BIM KW - Simulation KW - Pareto optimization KW - multi-objective optimization KW - scheduling Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20141006-23103 ER - TY - JOUR A1 - Völker, Conrad A1 - Mämpel, Silvio A1 - Kornadt, Oliver T1 - Measuring the human body’s micro‐climate using a thermal manikin JF - Indoor Air N2 - The human body is surrounded by a micro‐climate which results from its convective release of heat. In this study, the air temperature and flow velocity of this micro‐climate were measured in a climate chamber at various room temperatures, using a thermal manikin simulating the heat release of the human being. Different techniques (Particle Streak Tracking, thermography, anemometry, and thermistors) were used for measurement and visualization. The manikin surface temperature was adjusted to the particular indoor climate based on simulations with a thermoregulation model (UCBerkeley Thermal Comfort Model). We found that generally, the micro‐climate is thinner at the lower part of the torso, but expands going up. At the head, there is a relatively thick thermal layer, which results in an ascending plume above the head. However, the micro‐climate shape strongly depends not only on the body segment, but also on boundary conditions: the higher the temperature difference between the surface temperature of the manikin and the air temperature, the faster the air flow in the micro‐climate. Finally, convective heat transfer coefficients strongly increase with falling room temperature, while radiative heat transfer coefficients decrease. The type of body segment strongly influences the convective heat transfer coefficient, while only minimally influencing the radiative heat transfer coefficient. KW - Raumklima KW - Mikroklima KW - Wärmeübertragung KW - Strömungsmechanik KW - thermal manikin KW - climate chamber KW - micro climate KW - heat transfer coefficient KW - CFD KW - thermography Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181025-38153 UR - https://onlinelibrary.wiley.com/doi/abs/10.1111/ina.12112 N1 - This is the peer reviewed version of the following article: "Measuring the human body’s micro‐climate using a thermal manikin", which has been published in final form at https://doi.org/10.1111/ina.12112. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. IS - 24, 6 SP - 567 EP - 579 ER - TY - JOUR A1 - Motra, Hem Bahadur A1 - Hildebrand, Jörg A1 - Dimmig-Osburg, Andrea T1 - Assessment of strain measurement techniques to characterise mechanical properties of structural steel JF - Engineering Science and Technology, an International Journal N2 - Strain measurement is important in mechanical testing. A wide variety of techniques exists for measuring strain in the tensile test; namely the strain gauge, extensometer, stress and strain determined by machine crosshead motion, Geometric Moire technique, optical strain measurement techniques and others. Each technique has its own advantages and disadvantages. The purpose of this study is to quantitatively compare the strain measurement techniques. To carry out the tensile test experiments for S 235, sixty samples were cut from the web of the I-profile in longitudinal and transverse directions in four different dimensions. The geometry of samples are analysed by 3D scanner and vernier caliper. In addition, the strain values were determined by using strain gauge, extensometer and machine crosshead motion. Three techniques of strain measurement are compared in quantitative manner based on the calculation of mechanical properties (modulus of elasticity, yield strength, tensile strength, percentage elongation at maximum force) of structural steel. A statistical information was used for evaluating the results. It is seen that the extensometer and strain gauge provided reliable data, however the extensometer offers several advantages over the strain gauge and crosshead motion for testing structural steel in tension. Furthermore, estimation of measurement uncertainty is presented for the basic material parameters extracted through strain measurement. KW - Baustahl KW - Werkstoffprüfung KW - Zugversuch KW - Affecting factors; Measurement uncertainty; Materials testing; Quantitative comparison; Strain comparison; Tensile test Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31540 SP - 260 EP - 269 ER - TY - CHAP A1 - Hijazi, Ihab Hamzi A1 - Hussein, M. H. A1 - König, Reinhard T1 - Enabling geo-design: Evaluating the capacity of 3D city model to support thermal design in building T2 - 9th 3DGeoInfo Conference N2 - Enabling geo-design: Evaluating the capacity of 3D city model to support thermal design in building KW - Informatik KW - bim; cad; citygml; gbxml; thermal design Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160118-25089 CY - Dubai, UAE ER -