TY - CHAP A1 - Meißner, Udo F. A1 - Rueppel, Uwe A1 - Theiss, Mirko T1 - Network-Based Fire Engineering Supported by Agents N2 - Building design in Civil Engineering is characterized by the cooperation of experts in multiple disciplines. Close cooperation of engineers in different fields is the basis of high product quality, short development periods and a minimum of investment costs. For each building the engineers have to create a new fire engineering model. The consistent realization of the fire engineering model in all details has high demands on communication, collaboration and building models. Thereby, to preserve the related design models consistent to each other and compatible with the rules of fire engineering is a complex task. In addition, regulations and guidelines vary according to the building location, so the knowledge base must be integrated dynamically into the planning process. This contribution covers the integration of engineers and design models into a cooperation network on the basis of mobile agents. The distributed models of architectural design, structural planning and fire engineering are supported. These models are implemented as XML-based models which can be accessed by mobile agents for information retrieval and for processing tasks. Agents are provided to all planners, they are enabled to check up the distributed design models with the knowledge base of the fire protection regulations,. With the use of such an agent each planner is supported to check up his planning for accordance with the fire protection requirements. The fire-engineering-agent analyzes the design and detects inconsistencies by processing fire protection requirements and design model facts in a rule-based expert system. The possibility to check the planning information at an early state in the sense of compatibility to the fire protection regulations enables a comprehensive diagnosis of the design and the reduction of planning errors. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Brandschutz KW - Mehragentensystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1447 ER - TY - CHAP A1 - Schley, Frank A1 - Mejstrik, Marcus A1 - Holz, K.-Peter T1 - Network Based Co-operation Platform for Geotechnical Engineering N2 - This paper describes an approach to support co-operation of experts in heterogeneous geotechnical engineering project environments during both regular execution and handling of exceptional situations. A co-operation platform is introduced which is based on a generalized information model mapping key information about the construction project, the construction process as well as the organization structure. Several tools are provided to operate the information model in a network based environment. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Geotechnik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1431 ER - TY - CHAP A1 - Eslimy-Isfahany, S. H. R. A1 - Pegels, Georg T1 - Net-distributed Co-operation Including Developing Countries, Practical Case Study - Iran N2 - The scientific transfer of key technology features to developing countries, together with adequate competence, localisation and adaptation, is the primary purpose of the proposed investigation. It is evident that introducing high-level CAD design and detailing will improve the planning process in developing countries. Successful utilization of applied information technology for the planning process, however, depends on the user-interface of individual software. Therefore, to open the great opportunity embedded in CAD software for clients globally, the language and character-set barrier of traditional user-interfaces must be overcome. A proposal for a research program is given here to address such issue in favour of global civil engineering. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Iran Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1421 ER - TY - CHAP A1 - Gebbeken, Norbert A1 - Pfeiffer, Eberhard A1 - Videkhina, Inna T1 - Modules for the education of civil engineers and the management of expert knowledge N2 - In the focus of the Bologna-contract of the European secretaries of education the universities are invited to aim a unification and comparability of certificates and to offer compatible and cooperative models of education. Among existing lectures in the Internet there will arise a new competition between the universities in netbased teaching and learning environments. For the use of distributed sources of information and for the possibility to generate free configurable sequences of education modules you need management systems which are able to handle different formats of documents and to assemble it to consistent and valid lessons. Beside elementar viewing-functions, fusion of information also administrative tasks are needed, e.g. automated efficiency controls, adaptive learning surroundings. This paper attends to three aspects: - netbased teaching and learning in the area of the instruction of civil engineers - netbased information assembling and fusion of knowledge bases to higher level documents - netbased learning with international coordinated projects KW - Bautechnik KW - Computerunterstütztes Lernen KW - Wissensverarbeitung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-918 ER - TY - JOUR A1 - Rose, Martin T1 - Modeling of Freeway Traffic N2 - An integrated modeling of freeway traffic is developed, whose implementation in an uniform computer –aided simulation model facilitate comparative evaluation and systematic coupling of several traffic simulations, traffic controls, traffic measurements and traffic scenarios. The integrated modeling of freeway traffic is a basic mapping of freeway networks, control methods, measurements and different simulations of traffic flow... KW - Verkehrsplanung KW - Simulation KW - Autobahn Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2639 ER - TY - CHAP A1 - Ren, Aizhu A1 - Shi, Jianyong A1 - Xu, Yun T1 - Modeling of Buildings and Roads for Urban Applications based on 2D Digital Maps N2 - Three-dimensional models of urban objects play an important role in the urban applications such as urban planning, environmental concerning, or urban disaster mitigations. While the modeling of urban objects is time consuming and storage costing. This paper presents solutions for this. Buildings with regular shapes and plane roofs are constructed into computer models by identifying of graphic elements from the digital maps of urban area to get building base plane and building heights. Buildings with irregular shapes and non-plane roofs are constructed into computer models by employment of a specific system developed by the authors. Road objects and topologies are constructed into computer models by employment of specific algorithms. The solutions presented in this paper has been used in the development of urban disaster mitigation system for Shantou, China. KW - Architektur KW - Verteiltes System KW - Geoinformationssystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1791 ER - TY - THES A1 - Berninger, Anna Maria T1 - Mikrostrukturelle Eigenschaften von Quarz als Bestandteil spät reagierender, alkaliempfindlicher Zuschläge T1 - Microstructure of quartz as a component of slow-late-aggregate N2 - Zwischen den Jahren 1920 und 1930 kam es an der kalifornischen Küste zu Bauschäden an Brücken und Fahrbahnen, die sich vor allem in einer deutlichen Rissbildung äußerten. Seither werden immer wieder Bauschäden beschrieben, deren Ursache in der Reaktion von Zuschlägen, die „reaktive“ Kieselsäure enthalten, mit der Porenlösung des Betons zu sehen ist. Diese Reaktion wird als Alkali-Kieselsäure Reaktion (AKR) bezeichnet. Seit der ersten Veröffentlichung von Stanton über die „alkali-aggregate reaction“ an opalhaltigen Zuschlägen sind hunderte von Forschungsarbeiten zu diesem Thema durchgeführt und deren Ergebnisse veröffentlicht worden. Trotz eingehender Forschung seit mehr als 8o Jahren ist weder der Mechanismus der AKR vollständig geklärt noch eine eindeutige Voraussage über die Gefährdung von Bauwerken oder Bauteilen mit potentiell AKR-empfindlichen Zuschlägen möglich. Das liegt vor allen Dingen daran, das es sich bei der AKR um eine Reaktion handelt, die aus einer komplexen Abfolge chemischer und physikalischer Prozesse besteht, die in ihrer Gesamtheit zu einer Schädigung von Beton bzw. Betonbauteilen und Bauwerken führen können. Eine geschlossene Beschreibung und Behandlung dieser Reaktion ist nicht möglich, solange keine befriedigende Kenntnis über den Ablauf der einzelnen Schritte vorliegt. Dazu bedarf es grundsätzlicher Untersuchungen der einzelnen chemischen und physikalischen Reaktionsschritte sowie einer möglichst quantitativen Bewertung der verschiedenen Einflussfaktoren. Grundsätzlich gibt es weltweit eine ganze Reihe von Richtlinien und Normen , die dazu verhelfen sollen, Schädigungen an Bauwerken durch AKR zu verhindern. In Deutschland ist das momentan gültige Regelwerk die sogenannte Alkali-Richtlinie des deutschen Ausschusses für Stahlbeton (DAfStb). Sie dient zur Beurteilung von Zuschlag nach DIN 4226 [6, 7, 8] mit alkaliempfindlichen Bestandteilen. Dabei bezieht sich der Teil 2 der Richtlinie auf Zuschläge mit Opalsandstein, Kieselkreide und Flint aus bestimmten Gewinnungsgebieten. Hier wird eine reine Zuschlagprüfung gefordert. Teil 3 der Richtlinie bezieht sich auf präkambrische Grauwacken und andere alkaliempfindliche Gesteine. Gefordert werden hier Prüfungen der Zuschläge selbst sowie Prüfung an Betonbalken und 30er Würfeln in der Nebelkammer. Für die meisten in der Richtlinie genannten Zuschläge bilden die Prüfungen und Vorschriften eine ausreichende Sicherheit, um eine AKR zu vermeiden. Dennoch treten immer wieder Schäden mit Zuschlägen auf, die nach der Alkali-Richtlinie als unempfindlich eingestuft werden müssten. Dabei handelt es sich in der Regel um Schadensfälle, die erst nach mehreren Jahren mit spät reagierenden AKR-empfindlichen Zuschlägen auftreten. Zu diesen Zuschlägen, die gegebenenfalls speziell im Nebelkammertest innerhalb von neun Monaten keine signifikante Dehnung (<0,6mm/m) aufweisen, gehören Stressquarze, Kieselkalk, Granit, Porphyr, Kieselschiefer und Grauwacke. Die vorliegende Arbeit dient speziell der Beurteilung und Einordnung von unterschiedlichen kristallinen Quarzmodifikationen sowie der Ermittlung geeigneter Untersuchungsmethoden für die Beurteilung der AKR-Empfindlichkeit von Quarz. N2 - A lot of concrete deterioration due to ASR during the last years show, that it was not possible to estimate truly the al-kali-reactivity of aggregate. Also a true forecast, if a special concrete mixture or a building is insensible to ASR is not possible. The reason is, that there are damages especially with slow-late aggregates (greywacke, quartzite, rhyolite, stressed quartz…), although they were estimated as innocuous using the valid test methods. For getting more and true information about the ASR sensitivity of slow-late aggregates, interrelations between micro-structural properties and solubility were investigated. In special cases where is a good correlation between microstructure and solubility. But there are a lot of other influences. So only for a part of the investigated aggregates it is possible to get a good correla-tion. Thin section investigations, using light microscopy show, that the microstructure allows a prognosis how and where cracking will occur. KW - Quarz KW - Mikrostruktur KW - Alkali-Kieselsäure-Reaktion KW - slow-late-aggregate KW - alkali-silica-reaktion KW - microstructure KW - strain KW - stress Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050310-4494 ER - TY - CHAP A1 - Swaddiwudhipong, Somsak A1 - Tho, Kee Kiat A1 - Liu, Zishun T1 - Material characterization using artificial neural network N2 - Indentation experiments have been carried out over the past century to determine hardness of materials. Modern indentation machines have the capability to continuously monitor load and displacement to high precision and accuracy. In recent years, research interests have focussed on methods to extract material properties from indentation load-displacement curves. Analytical methods to interpret the indentation load-displacement curves are difficult to formulate due to material and geometric nonlinearities as well as complex contact interactions. In the present study, an artificial neural network model was constructed for interpretation of indentation load-displacement curves. Large strain-large deformation finite element analyses were first carried out to simulate indentation experiments. The data from finite element analyses were then used to train the artificial neural network model. The artificial neural network model was able to accurately determine the material properties when presented with load-displacement curves which were not used in the training process. The proposed artificial neural network model is robust and directly relates the characteristics of the indentation loaddisplacement curve to the elasto-plastic material properties. KW - Neuronales Netz KW - Wasserbau KW - Werkstoffprüfung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1550 ER - TY - THES A1 - Wagner, Sebastian T1 - MANFRED LEHMBRUCK - Ein Architekt der Moderne T1 - MANFRED LEHMBRUCK - An Architect of Modernism N2 - Diese erste umfassende Monographie über den Architekten, Professor und Museumsmann Manfred Lehmbruck (Paris 1913 – Stuttgart 1992) konzentriert sich neben dem Lebensweg und den theoretischen Arbeiten Lehmbrucks zum Museumsbau auf die drei realisierten Museumsbauten: das Reuchlinhaus Pforzheim, das Wilhelm-Lehmbruck-Museum Duisburg und das Federseemuseum Bad Buchau. Aber auch die drei anderen bedeutenden Gebäudeensembles, die Pausa AG Mössingen, die Berufsschule und das Stadtbad Stuttgart-Feuerbach und der Solitär der Mittelschule in Mössingen, alle fertiggestellt in den Sechziger Jahren des letzten Jahrhunderts, werden ausführlich besprochen. Das umfassende Werkverzeichnis im Anhang zeigt deutlich den Einfluß, den seine Lehrer, allen voran Ludwig Mies van der Rohe, aber auch Heinrich Tessenow, Paul Bonatz und Auguste Perret, auf die Architektursprache Lehmbrucks gehabt haben. N2 - This first comprehensive monograph about the architect, professor and specialist for museum architecture Manfred Lehmbruck ( Paris 1913 – Suttgart 1992) focuses on Lehmbruck’s three realized museum buildings: Reuchlinhaus Pforzheim, Wilhelm-Lehmbruck-Museum Duisburg and Federseemuseum Bad Buchau. But also the other three significant building complexes Pausa AG Mössingen, Berufsschule and Public Bath Stuttgart-Feuerbach and the Secondary School in Mössingen, all three of them completed in the sixties of the last century, are extensively discussed. The comprehensive catalog of his buildings clearly shows the influence of his teachers like Ludwig Mies van der Rohe, Heinrich Tessenow, Paul Bonatz and Auguste Perret. Lehmbruck’s biography and his theoretical works on museum architecture complete the picture. KW - Architekturwettbewerb KW - Architektur / Geschichte KW - Architektur / Soziologie KW - Architekturtheorie KW - Funktionalismus KW - Architektur / Gesch KW - Reuchlinhaus KW - Stadtbad Feuerbach KW - Pausa AG KW - Mittelschule Mössingen KW - Reuchlinhaus KW - Public Bath Feuerbach KW - Pausa AG KW - Secondary School Moessingen Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060313-7773 ER - TY - CHAP A1 - Miles, John A1 - Cen, Mei A1 - Taylor, Mark T1 - Linking Sketching and Constraint Checking for Early Conceptual Design N2 - At the start of the conceptual design process, designers start to give tangible form to their thoughts by sketching. This helps with reasoning and communicates ideas to other members of the team. Sketches are gradually worked up into more formal drawings which are then passed to the other stages of the design process. There are however some problems with basing early ideas on sketching. For example, due to their ad-hoc nature, sketches tend only to be diagrammatic representations and so designers cannot be sure that their ideas are feasible and what is being proposed meets the constraints described in the client brief. This can result in designers wasting time working up ideas which prove to be unsuitable. Also the process of constraint checking is complex and time consuming and so designers tend limit their search of possible options and instead choose satisfying rather than good solutions. This paper describes the INTEGRA project which examines the role of sketching in early conceptual design and how this can be linked to other aspects of the process and particularly automated constraint checking using an IT based approach. The focus for the work is the design of framed buildings. A multi-disciplinary approach has been adopted and the work has been undertaken in close collaboration with practising designers and clients. KW - Konzipieren KW - Bauwerk KW - Management KW - Constraintnetz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1547 ER -