TY - THES A1 - Brehm, Maik T1 - Vibration-based model updating: Reduction and quantification of uncertainties N2 - Numerical models and their combination with advanced solution strategies are standard tools for many engineering disciplines to design or redesign structures and to optimize designs with the purpose to improve specific requirements. As the successful application of numerical models depends on their suitability to represent the behavior related to the intended use, they should be validated by experimentally obtained results. If the discrepancy between numerically derived and experimentally obtained results is not acceptable, a model revision or a revision of the experiment need to be considered. Model revision is divided into two classes, the model updating and the basic revision of the numerical model. The presented thesis is related to a special branch of model updating, the vibration-based model updating. Vibration-based model updating is a tool to improve the correlation of the numerical model by adjusting uncertain model input parameters by means of results extracted from vibration tests. Evidently, uncertainties related to the experiment, the numerical model, or the applied numerical solving strategies can influence the correctness of the identified model input parameters. The reduction of uncertainties for two critical problems and the quantification of uncertainties related to the investigation of several nominally identical structures are the main emphases of this thesis. First, the reduction of uncertainties by optimizing reference sensor positions is considered. The presented approach relies on predicted power spectral amplitudes and an initial finite element model as a basis to define the assessment criterion for predefined sensor positions. In combination with geometry-based design variables, which represent the sensor positions, genetic and particle swarm optimization algorithms are applied. The applicability of the proposed approach is demonstrated on a numerical benchmark study of a simply supported beam and a case study of a real test specimen. Furthermore, the theory of determining the predicted power spectral amplitudes is validated with results from vibration tests. Second, the possibility to reduce uncertainties related to an inappropriate assignment for numerically derived and experimentally obtained modes is investigated. In the context of vibration-based model updating, the correct pairing is essential. The most common criterion for indicating corresponding mode shapes is the modal assurance criterion. Unfortunately, this criterion fails in certain cases and is not reliable for automatic approaches. Hence, an alternative criterion, the energy-based modal assurance criterion, is proposed. This criterion combines the mathematical characteristic of orthogonality with the physical properties of the structure by modal strain energies. A numerical example and a case study with experimental data are presented to show the advantages of the proposed energy-based modal assurance criterion in comparison to the traditional modal assurance criterion. Third, the application of optimization strategies combined with information theory based objective functions is analyzed for the purpose of stochastic model updating. This approach serves as an alternative to the common sensitivity-based stochastic model updating strategies. Their success depends strongly on the defined initial model input parameters. In contrast, approaches based on optimization strategies can be more flexible. It can be demonstrated, that the investigated nature inspired optimization strategies in combination with Bhattacharyya distance and Kullback-Leibler divergence are appropriate. The obtained accuracies and the respective computational effort are comparable with sensitivity-based stochastic model updating strategies. The application of model updating procedures to improve the quality and suitability of a numerical model is always related to additional costs. The presented innovative approaches will contribute to reduce and quantify uncertainties within a vibration-based model updating process. Therefore, the increased benefit can compensate the additional effort, which is necessary to apply model updating procedures. N2 - Eine typische Anwendung von numerischen Modellen und den damit verbundenen numerischen Lösungsstrategien ist das Entwerfen oder Ertüchtigen von Strukturen und das Optimieren von Entwürfen zur Verbesserung spezifischer Eigenschaften. Der erfolgreiche Einsatz von numerischen Modellen ist abhängig von der Eignung des Modells bezüglich der vorgesehenen Anwendung. Deshalb ist eine Validierung mit experimentellen Ergebnissen sinnvoll. Zeigt die Validierung inakzeptable Unterschiede zwischen den Ergebnissen des numerischen Modells und des Experiments, sollte das numerische Modell oder das experimentelle Vorgehen verbessert werden. Für die Modellverbesserung gibt es zwei verschiedene Möglichkeiten, zum einen die Kalibrierung des Modells und zum anderen die grundsätzliche Änderung von Modellannahmen. Die vorliegende Dissertation befasst sich mit der Kalibrierung von numerischen Modellen auf der Grundlage von Schwingungsversuchen. Modellkalibrierung ist eine Methode zur Verbesserung der Korrelation zwischen einem numerischen Modell und einer realen Struktur durch Anpassung von Modelleingangsparametern unter Verwendung von experimentell ermittelten Daten. Unsicherheiten bezüglich des numerischen Modells, des Experiments und der angewandten numerischen Lösungsstrategie beeinflussen entscheidend die erzielbare Qualität der identifizierten Modelleingangsparameter. Die Schwerpunkte dieser Dissertation sind die Reduzierung von Unsicherheiten für zwei kritische Probleme und die Quantifizierung von Unsicherheiten extrahiert aus Experimenten nominal gleicher Strukturen. Der erste Schwerpunkt beschäftigt sich mit der Reduzierung von Unsicherheiten durch die Optimierung von Referenzsensorpositionen. Das Bewertungskriterium für vordefinierte Sensorpositionen basiert auf einer theoretischen Abschätzung von Amplituden der Spektraldichtefunktion und einem dazugehörigen Finite Elemente Modell. Die Bestimmung der optimalen Konfiguration erfolgt durch eine Anwendung von Optimierungsmethoden basierend auf genetischen Algorithmen und Schwarmintelligenzen. Die Anwendbarkeit dieser Methoden wurde anhand einer numerischen Studie an einem einfach gelagerten Balken und einem real existierenden komplexen Versuchskörper nachgewiesen. Mit Hilfe einer experimentellen Untersuchung wird die Abschätzung der statistischen Eigenschaften der Antwortspektraldichtefunktionen an diesem Versuchskörper validiert. Im zweiten Schwerpunkt konzentrieren sich die Untersuchungen auf die Reduzierung von Unsicherheiten, hervorgerufen durch ungeeignete Kriterien zur Eigenschwingformzuordnung. Diese Zuordnung ist entscheidend für Modellkalibrierungen basierend auf Schwingungsversuchen. Das am Häufigsten verwendete Kriterium zur Zuordnung ist das modal assurance criterion. In manchen Anwendungsfällen ist dieses Kriterium jedoch kein zuverlässiger Indikator. Das entwickelte alternative Kriterium, das energy-based modal assurance criterion, kombiniert das mathematische Merkmal der Orthogonalität mit den physikalischen Eigenschaften der untersuchten Struktur mit Hilfe von modalen Formänderungsarbeiten. Ein numerisches Beispiel und eine Sensitivitätsstudie mit experimentellen Daten zeigen die Vorteile des vorgeschlagenen energiebasierten Kriteriums im Vergleich zum traditionellen modal assurance criterion. Die Anwendung von Optimierungsstrategien auf stochastische Modellkalibrierungsverfahren wird im dritten Schwerpunkt analysiert. Dabei werden Verschiedenheitsmaße der Informationstheorie zur Definition von Zielfunktionen herangezogen. Dieser Ansatz stellt eine Alternative zu herkömmlichen Verfahren dar, welche auf gradientenbasierten Sensitivitätsmatrizen zwischen Eingangs- und Ausgangsgrößen beruhen. Deren erfolgreicher Einsatz ist abhängig von den Anfangswerten der Eingangsgrößen, wobei die vorgeschlagenen Optimierungsstrategien weniger störanfällig sind. Der Bhattacharyya Abstand und die Kullback-Leibler Divergenz als Zielfunktion, kombiniert mit stochastischen Optimierungsverfahren, erwiesen sich als geeignet. Bei vergleichbarem Rechenaufwand konnten ähnliche Genauigkeiten wie bei den Modellkalibrierungsverfahren, die auf Sensitivitätsmatrizen basieren, erzielt werden. Die Anwendung von Modellkalibrierungsverfahren zur Verbesserung der Eignung eines numerischen Modells für einen bestimmten Zweck ist mit einem Mehraufwand verbunden. Die präsentierten innovativen Verfahren tragen zu einer Reduzierung und Quantifizierung von Unsicherheiten innerhalb eines Modellkalibrierungsprozesses basierend auf Schwingungsversuchen bei. Mit dem zusätzlich generierten Nutzen kann der Mehraufwand, der für eine Modellkalibrierung notwendig ist, nachvollziehbar begründet werden. T2 - Modellkalibrierung basierend auf Schwingungsversuchen: Reduzierung und Quantifizierung von Unsicherheiten T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2011,1 KW - Dynamik KW - Optimierung KW - Modellkalibrierung KW - Modezuordung KW - optimale Sensorpositionierung KW - model updating KW - mode pairing KW - optimal sensor positions KW - dissimilarity measures KW - optimization Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20110926-15553 ER - TY - JOUR A1 - Faizollahzadeh Ardabili, Sina A1 - Najafi, Bahman A1 - Alizamir, Meysam A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin A1 - Rabczuk, Timon T1 - Using SVM-RSM and ELM-RSM Approaches for Optimizing the Production Process of Methyl and Ethyl Esters JF - Energies N2 - The production of a desired product needs an effective use of the experimental model. The present study proposes an extreme learning machine (ELM) and a support vector machine (SVM) integrated with the response surface methodology (RSM) to solve the complexity in optimization and prediction of the ethyl ester and methyl ester production process. The novel hybrid models of ELM-RSM and ELM-SVM are further used as a case study to estimate the yield of methyl and ethyl esters through a trans-esterification process from waste cooking oil (WCO) based on American Society for Testing and Materials (ASTM) standards. The results of the prediction phase were also compared with artificial neural networks (ANNs) and adaptive neuro-fuzzy inference system (ANFIS), which were recently developed by the second author of this study. Based on the results, an ELM with a correlation coefficient of 0.9815 and 0.9863 for methyl and ethyl esters, respectively, had a high estimation capability compared with that for SVM, ANNs, and ANFIS. Accordingly, the maximum production yield was obtained in the case of using ELM-RSM of 96.86% for ethyl ester at a temperature of 68.48 °C, a catalyst value of 1.15 wt. %, mixing intensity of 650.07 rpm, and an alcohol to oil molar ratio (A/O) of 5.77; for methyl ester, the production yield was 98.46% at a temperature of 67.62 °C, a catalyst value of 1.1 wt. %, mixing intensity of 709.42 rpm, and an A/O of 6.09. Therefore, ELM-RSM increased the production yield by 3.6% for ethyl ester and 3.1% for methyl ester, compared with those for the experimental data. KW - Biodiesel KW - Optimierung KW - extreme learning machine KW - machine learning KW - response surface methodology KW - support vector machine KW - OA-Publikationsfonds2018 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181025-38170 UR - https://www.mdpi.com/1996-1073/11/11/2889 IS - 11, 2889 SP - 1 EP - 20 PB - MDPI CY - Basel ER - TY - JOUR A1 - Ganev, T. A1 - Marinov, M. T1 - Towards Optimal Designing of thin elastic Plates with a specific free Oscillations Frequency N2 - Thin elastic plates are the basic constructional elements and are very often subjected to dynamic effects especially in the machine-building structures. Their saving design of resonance conditions of operation is an extremely complicated task which cannot be solved analytically. In the present report an efficient and sufficiently general method for optimal design of thin plates is worked out on the basis of energy resonance method of Wilder, the method of the finite elements for dynamic research and the methods of parameter optimization. By means of these methods various limitations and requirements put by the designer to the plates can be taken into account. A programme module for numerical investigation of the weight variation of the plate depending on the taken variable of the designed thickness at different supporting conditions is developed. The reasons for the considerable quantity and quality difference between the obtained optimal designs are also analysed. KW - Platte KW - Optimierung KW - Freie Schwingung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5375 ER - TY - JOUR A1 - Alemu, Yohannes L. A1 - Habte, Bedilu A1 - Lahmer, Tom A1 - Urgessa, Girum T1 - Topologically preoptimized ground structure (TPOGS) for the optimization of 3D RC buildings JF - Asian Journal of Civil Engineering N2 - As an optimization that starts from a randomly selected structure generally does not guarantee reasonable optimality, the use of a systemic approach, named the ground structure, is widely accepted in steel-made truss and frame structural design. However, in the case of reinforced concrete (RC) structural optimization, because of the orthogonal orientation of structural members, randomly chosen or architect-sketched framing is used. Such a one-time fixed layout trend, in addition to its lack of a systemic approach, does not necessarily guarantee optimality. In this study, an approach for generating a candidate ground structure to be used for cost or weight minimization of 3D RC building structures with included slabs is developed. A multiobjective function at the floor optimization stage and a single objective function at the frame optimization stage are considered. A particle swarm optimization (PSO) method is employed for selecting the optimal ground structure. This method enables generating a simple, yet potential, real-world representation of topologically preoptimized ground structure while both structural and main architectural requirements are considered. This is supported by a case study for different floor domain sizes. KW - Bodenmechanik KW - Strukturanalyse KW - Optimierung KW - Stahlbetonkonstruktion KW - Dreidimensionales Modell KW - ground structure KW - TPOGS KW - topology optimization KW - 3D reinforced concrete buildings Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63677 UR - https://link.springer.com/article/10.1007/s42107-023-00640-2 VL - 2023 SP - 1 EP - 11 PB - Springer International Publishing CY - Cham ER - TY - THES A1 - Weitzmann, Rüdiger T1 - Theory and application of optimization strategies for the design of seismically excited structures N2 - The study introduces into the theory and application of optimization strategies in earthquake engineering. The optimization algorithm substitutes the intuitive solution of practical problems done by the engineer in daily practice, providing automatic design tools and numerical means for further exploration of the design space for various extremum states. This requires a mathematical formulation of the design task, that is provided for typical seismic evaluations within this document. Utilizing the natural relation between design and optimization tasks, appropriate mechanical concepts are developed and discussed. The explanations start with an overview on the mechanical background for continua. Hereby the focus is placed on elasto-plastic structures. The given extremum formulations are treated with help of discretization methods in order to obtain optimization problems. These basics are utilized for derivation of programs for eigenvalue and stability analysis, that are applied in simplified linear analysis for the design of seismically excited structures. Another focus is set on the application in simplified nonlinear design, that uses limit state analyses on the basis of nonlinear problem formulations. Well known concepts as the response and pushover analysis are covered as well as alternative strategies on the basis of shakedown theory or cycle and deformation based evaluations. Furthermore, the study gives insight into the application of optimization problems in conjunction with nonlinear time history analyses. The solution of step-by-step procedures within optimization algorithms is shown and aspects of dynamic limit state analyses are discussed. For illustration of the great variety of optimization-based concepts in earthquake engineering, several specialized applications are presented, e.g. the generation of artificial ground motions and the determination of reduction coefficients for design spectrum reduction due to viscous and hysteretic damping. As well alternative strategies for the design of base isolated structures with controlled impact are presented. All presented applications are illustrated with help of various examples. N2 - Die vorliegende Arbeit führt in die Theorie und Anwendung von Optimiierungsverfahren im Erdbebeningenieurwesen ein. Die vorgestellten Optimierungsalgorithmen ersetzen die typische intuitive Lösung von praktischen Bemessungsaufgaben, mit Bereitstellung von automatischen Methoden und numerischen Mitteln für die Bewertung des Designraumes bezüglich extremer Zustände. Dies erfordert eine geeignete mathematische Formulierung der Bemessungsaufgaben, die für typische Anwendungsfälle bereitgestellt werden. Ausgehend von der engen Beziehung von Bemessungs- und Optimierungsaufgaben werden wesentliche theoretische Grundlagen für die Ableitung praxistauglicher Analysekonzepte entwickelt und diskutiert. Die Darstellung beginnt mit einem Überblick zum mechanischen Hintergrund. Der Schwerpunkt wird dabei auf die Analyse von elastisch-plastischen Tragwerken gelegt. Die vorgestellten Extremalformulierungen werden mit Methoden der Diskretisierung in Optimierungsprobleme umgeformt. Diese bilden die Grundlage für die Analyse von Eigenwert- und Stabilitätsproblemen im Erdbebeningenierwesen. Weiterhin werden vereinfachte lineare Bemessungsmethoden besprochen. Eine Erweiterung wird duch die Einbeziehung von nichlinearen Aspekten erzielt, die einen wesentlichen Teil der Arbeit ausmachen. Einerseits werden bekannte Konzepte auf der Basis von Antwortspektren und Pushoveranalysen einbezogen, andererseits werden auch alternative Strategien auf der Basis der Einspieltheorie oder zyklen- oder deformationsbasierten Analyse vorgestellt. Desweiteren werden Anwendungen von Optimierungsverfahren im Zusammenhang mit nichtlinearen Zeitverlaufsmethoden diskutiert. Die Lösung von Zeitverlaufsproblemen in Form von Optimierungsaufgaben wird vorgestellt und Aspekte der Grenzzustandsanalyse für dynamische Probleme behandelt. Die Vielfältigkeit von Optimierungsanwendungen im Erdbebeningenieurwesen wird anhand verschiedener Spezialanwendungen demonstriert wie z.B. die Generierung von künstlichen Erdbebenzeitverläufen und die Modifikation von Bemessungsspektren für die Analyse von nichtlinear beanspruchten Tragwerken mit viskoser und hysteretischer Dämpfung. Darüberhinaus wird eine alternative Methode für die Bemessung von basisisolierten Tragwerken unter Verwendung von kontrollierten Kollisionen vorgestellt. Alle Anwendungen werden in zahlreichen Beispielen näher erläutert. T2 - Theorie und Anwendung von Optimierungsstrategien für die Bemessung von seismisch beanspruchten Tragwerken T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 19 KW - Dynamik KW - Erdbeben KW - Bemessung KW - Optimierung KW - Dynamics KW - Earthquake KW - Design KW - Optimization Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20091030-14917 ER - TY - BOOK A1 - Graetz, Holger T1 - Synergiepotenzial einer fragmentierten Wasserwirtschaft T1 - Synergies of fragmented organizational structures in the water sector N2 - Problemstellung, Stand der Forschung und Zielsetzung der Arbeit Seit mehreren Jahren bestimmen veränderte Zielsetzungen in Europa den politischen Handlungsrahmen in der Organisation der Wasserwirtschaft und folgen dem Trend zu stärker ökonomisch und ökologisch ausgerichtetem Handeln. So fordert die Europäische Wasserrahmenrichtlinie u.a. die Umsetzung einer flussgebietsorientierten Bewirtschaftung der Oberflächengewässer und des Grundwassers innerhalb bestimmter Fristen. Derzeitige Modernisierungskonzepte der Wasserwirtschaft fokussieren im Wesentlichen die Organisationsstrukturen kommunaler Aufgabenträger und deren Unternehmen, nicht aber eine Veränderung der umfassenden politischen und verwaltenden Organisationsstrukturen zur Steuerung der operativen Ebene. Die angestrebte Modernisierung wird daher insbesondere in kleinteiligen und komplexen, so genannten fragmentierten Organisationsstrukturen mit einer ausschließlich auf Unternehmen fokussierten Betrachtung nicht erreichbar sein. Diese kaum erforschten Strukturen bieten aufgrund der bestehenden Intransparenz und Komplexität der zahlreichen Organisationselemente vielfältige Ansatzpunkte für Optimierungsmöglichkeiten. Den entsprechenden Stand der Forschung bilden nur grundlegende Ansätze zur Betrachtung des Zusammenwirkens von Akteuren in Organisationsstrukturen sowie entsprechende Optimierungsansätze der Organisations- und Managementtheorien. Sie beziehen sich meist nur auf Unternehmen allgemein. Es fehlen derzeit umfassende und transparente Darstellungen der komplexen Organisationsstruktur der Wasserwirtschaft. Zielsetzung der vorliegenden Arbeit ist es, eine ganzheitliche Modernisierung insbesondere fragmentierter Wasserwirtschaftsstrukturen voranzutreiben. Es soll eine Steigerung der gesamten Leistungsfähigkeit sowohl der politischen, der verwaltungs- als auch der unternehmensbezogenen Organisationsstrukturen in der Wasserwirtschaft erreicht werden. ... N2 - During recent years, changing political objectives have determined the organizational framework of the European water sector. Economic and ecological ideas have become even more important than they were in the past. As a result, the European Water Framework Directive now requires a river basin-oriented approach to manage surface and ground water within a defined period of time. Current approaches to modernize the water sector focus on the organizational structures of municipal authorities and their companies. They do not strive to change the political and administrative organizational structures, which govern at the operating level. Therefore the desired modernization of small and complex – so called ”fragmented” – organizational structures will not come true. These fragmented structures are rarely investigated, although they offer a variety of opportunities to optimize a highly non-transparent and complex system, which has many organizational elements. The approach presented in this dissertation provides an opportunity to modernize these fragmented organizational structures in the water sector. A comprehensive political, administrative and company-oriented organizational framework will be presented. This framework will allow a transparent overview of all the important players, including their specific activity spectra. Results of an analysis of international organizational models of the water sector are presented, together with an empirical study in Thuringia, Germany. This provides the key elements of a comprehensive collaboration in these fragmented organizational structures. Finally, a decision-making support instrument for federal authorities’ decision-makers is demonstrated, enabling them to qualify changes in organizational structures. It will also provide an opportunity to fulfill the current ambitious objectives of politicians in the water sector. T3 - Schriftenreihe der Professur Betriebswirtschaftslehre im Bauwesen - 3 KW - Entscheidungsträger KW - Fragmentierung KW - Konsens KW - Organisationsstruktur KW - Reorganisation KW - Optimierung KW - Siedlungswasserwirtschaft KW - Wasserwirtschaft KW - Entscheidungshilfemodell KW - flussgebietsorientierte Bewirtschaftung KW - Werthandlungsbereich KW - Werthandlungsmodell KW - value activity model KW - decision KW - synergy Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080207-12903 UR - http://vg07.met.vgwort.de/na/2c6cd99b9eb3d1f5cfa4ac573dab4d SN - 978-3-86068-335-4 ER - TY - THES A1 - Graetz, Holger T1 - Synergiepotenzial einer fragmentierten Wasserwirtschaft T1 - Synergies of fragmented organizational structures in the water sector N2 - Problemstellung, Stand der Forschung und Zielsetzung der Arbeit Seit mehreren Jahren bestimmen veränderte Zielsetzungen in Europa den politischen Handlungsrahmen in der Organisation der Wasserwirtschaft und folgen dem Trend zu stärker ökonomisch und ökologisch ausgerichtetem Handeln. So fordert die Europäische Wasserrahmenrichtlinie u.a. die Umsetzung einer flussgebietsorientierten Bewirtschaftung der Oberflächengewässer und des Grundwassers innerhalb bestimmter Fristen. Derzeitige Modernisierungskonzepte der Wasserwirtschaft fokussieren im Wesentlichen die Organisationsstrukturen kommunaler Aufgabenträger und deren Unternehmen, nicht aber eine Veränderung der umfassenden politischen und verwaltenden Organisationsstrukturen zur Steuerung der operativen Ebene. Die angestrebte Modernisierung wird daher insbesondere in kleinteiligen und komplexen, so genannten fragmentierten Organisationsstrukturen mit einer ausschließlich auf Unternehmen fokussierten Betrachtung nicht erreichbar sein. Diese kaum erforschten Strukturen bieten aufgrund der bestehenden Intransparenz und Komplexität der zahlreichen Organisationselemente vielfältige Ansatzpunkte für Optimierungsmöglichkeiten. Den entsprechenden Stand der Forschung bilden nur grundlegende Ansätze zur Betrachtung des Zusammenwirkens von Akteuren in Organisationsstrukturen sowie entsprechende Optimierungsansätze der Organisations- und Managementtheorien. Sie beziehen sich meist nur auf Unternehmen allgemein. Es fehlen derzeit umfassende und transparente Darstellungen der komplexen Organisationsstruktur der Wasserwirtschaft. Zielsetzung der vorliegenden Arbeit ist es, eine ganzheitliche Modernisierung insbesondere fragmentierter Wasserwirtschaftsstrukturen voranzutreiben. Es soll eine Steigerung der gesamten Leistungsfähigkeit sowohl der politischen, der verwaltungs- als auch der unternehmensbezogenen Organisationsstrukturen in der Wasserwirtschaft erreicht werden. Vorgehensweise und Methodik In einer Situationsanalyse wird ein umfassender politischer, verwaltungs- und unternehmensorientierter Organisationsrahmen mit den Handlungsspektren transparent gemacht. Nicht nur unternehmensorientierte, sondern ebenso politische und verwaltungsorientierte Akteure der Organisationsstrukturen werden dabei als potenziell Handelnde analysiert. Schwerpunkt ist dabei insbesondere das Zusammenwirken bestehender kleinteiliger oder so genannter fragmentierter Organisationsstrukturen. Aus weiteren mit theoretischen Abhandlungen zu Aufwand, Nutzen, Werten und Wertketten des akteursbezogenen Handlungsspektrums wird ein Werthandlungsmodell für die Wasserwirtschaft entwickelt. Internationale Organisationsmodelle der Wasserwirtschaft werden hinsichtlich gesamtheitlichen Zusammenwirkens untersucht. Dem folgt eine empirische Untersuchung der Aufgabenträger des Thüringer Strukturhilfeprogramms der Jahre 1999 bis 2006, um weitere Erkenntnisse über fragmentierte Organisationsstrukturen zu gewinnen. Aus den in Theorie und Praxis gewonnen Erkenntnissen wird ein Instrument zur Entscheidungsunterstützung in mehren Schritten entwickelt, das Entscheidungsträger auf nationaler Ebene beziehungsweise entsprechender föderaler Zuständigkeit darin unterstützt, die Leistungsfähigkeit der Organisationsstrukturen der Wasserwirtschaft im Sinne eines effizienten Erreichens gesetzter Qualitätsziele zu optimieren. Ergebnisse Die ökonomisch-technische Arbeit gibt Hilfestellung bei geeigneten Optimierungsanstrengungen in für die Wasserwirtschaft typischen fragmentierten Organisationsstrukturen. Das fünfstufige Werthandlungsmodell mit seiner transparenten Darstellung des Zusammenspiels operativer, administrativer und politischer Akteure liefert Handlungsansätze für eine verbesserte Erfüllung der veränderten Zielsetzungen in Europa. Im Gegensatz zu bisherigen ausschließlich unternehmensspezifischen Darstellungen erlaubt das Modell eine institutionen- beziehungsweise unternehmensübergreifende Untersuchung. Diese wird den Belangen wasserwirtschaftlicher Organisationsstrukturen gerecht, die sich bisher an politischen anstatt an wasserwirtschaftlichen Grenzen orientieren. Eine modellbezogene Untersuchung mehrerer Fusionsprojekte ergab im Wesentlichen, dass Versorgungsgebiete kleiner Aufgabenträger am stärksten vom Zusammenwirken mit einer größeren Einheit profitieren können. Hierbei können Probleme unzureichender personeller und struktureller Ressourcen gelöst und eine ordnungsgemäße Betriebsführung erreicht werden. Das Zusammenwirken führt neben Aufwandsoptimierungen zu essentiellen Qualitätsverbesserungen in den Betriebsabläufen, die die Betriebssicherheit erhöhen. Zudem erlaubt das Zusammenwirken in größeren Einheiten die Implementierung einer ganzheitlichen Unternehmensphilosophie und damit eine qualifizierte Steuerung von Eigen- und Fremdleistungen. Die vorgenommene Systematisierung der Synergieeffekte sowie der dazu notwendigen Maßnahmen und Voraussetzungen bietet eine grundlegende Struktur, an der sich weiterführende Untersuchungen von Projekten der Zusammenarbeit in der Wasserwirtschaft orientieren können. Aus den Untersuchungen zu internationalen Organisationsansätzen und regionalen Fusionsprojekten lässt sich folgern, dass über ein geeignetes Zusammenwirken in der Wasserwirtschaft nur fallbezogen zu entscheiden ist. Diese Erkenntnis führte zu der Entwicklung eines Instrumentes, das die Organisationsstrukturen transparent macht und die Entscheidungsfindung unterstützt. Die Anwendung des Instrumentes zur Entscheidungsunterstützung bietet die Chance, geeignete organisatorische Veränderungen hin zu einer zukunftsorientierten Wasserwirtschaft unter Berücksichtigung regionaler Aspekte durchzuführen und gleichzeitig Synergiepotenzial bei einer Zusammenlegung kleiner Unternehmen mit anderen Unternehmen realisieren zu können. Fallstudien behandeln das Instrument und unterstützen die adressierten Entscheidungsträger darin, sich ein klares Bild über das mögliche Optimierungspotenzial durch Veränderungen der umfassenden Organisationsstrukturen zu machen. Dies fördert sowohl eine optimierte Koordination der Handlungsportfolios als auch deren Umsetzung. Die Arbeit bietet einen Anhalt für eine intensivere Begleitung und Aufarbeitung von Kooperations- und Konzentrationsprozessen insbesondere an Schnittstellen zwischen Aufgabenträgern, Unternehmen und Behörden der Wasserwirtschaft. Die Zuordnung, welche Akteure von den Chancen der Wertbeitragssteigerung am stärksten profitieren, bleibt die Aufgabe der politischen Willensbildung. Abschließend ist festzustellen, dass die Wasserwirtschaft nur dann den ehrgeizigen Zielen politischer Willensbildung nahe kommt und dem Wohle der Gesellschaft dient, wenn sie in geeigneten Organisationsstrukturen stattfindet. Hierfür liefert die beschriebene Arbeit ihren Beitrag, indem sie Entscheidungsträgern auf Bundes- und Länderebene das Handwerkszeug bereitstellt, geeignete Veränderungen der Strukturen abwägen und veranlassen zu können. N2 - During recent years, changing political objectives have determined the organizational framework of the European water sector. Economic and ecological ideas have become even more important than they were in the past. As a result, the European Water Framework Directive now requires a river basin-oriented approach to manage surface and ground water within a defined period of time. Current approaches to modernize the water sector focus on the organizational structures of municipal authorities and their companies. They do not strive to change the political and administrative organizational structures, which govern at the operating level. Therefore the desired modernization of small and complex – so called ”fragmented” – organizational structures will not come true. These fragmented structures are rarely investigated, although they offer a variety of opportunities to optimize a highly non-transparent and complex system, which has many organizational elements. The approach presented in this dissertation provides an opportunity to modernize these fragmented organizational structures in the water sector. A comprehensive political, administrative and company-oriented organizational framework will be presented. This framework will allow a transparent overview of all the important players, including their specific activity spectra. Results of an analysis of international organizational models of the water sector are presented, together with an empirical study in Thuringia, Germany. This provides the key elements of a comprehensive collaboration in these fragmented organizational structures. Finally, a decision-making support instrument for federal authorities’ decision-makers is demonstrated, enabling them to qualify changes in organizational structures. It will also provide an opportunity to fulfill the current ambitious objectives of politicians in the water sector. KW - Entscheidungsträger KW - Fragmentierung KW - Konsens KW - Organisationsstruktur KW - Reorganisation KW - Optimierung KW - Siedlungswasserwirtschaft KW - Wasserwirtschaft KW - Entscheidungshilfemodell KW - flussgebietsorientierte Bewirtschaftung KW - Werthandlungsbereich KW - Werthandlungsmodell KW - value activity model KW - decision KW - synergy Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080130-12886 UR - http://vg07.met.vgwort.de/na/74080aa7f9100c22a7d3e454c3b400 ER - TY - THES A1 - Ghasemi, Hamid T1 - Stochastic optimization of fiber reinforced composites considering uncertainties N2 - Briefly, the two basic questions that this research is supposed to answer are: 1. Howmuch fiber is needed and how fibers should be distributed through a fiber reinforced composite (FRC) structure in order to obtain the optimal and reliable structural response? 2. How do uncertainties influence the optimization results and reliability of the structure? Giving answer to the above questions a double stage sequential optimization algorithm for finding the optimal content of short fiber reinforcements and their distribution in the composite structure, considering uncertain design parameters, is presented. In the first stage, the optimal amount of short fibers in a FRC structure with uniformly distributed fibers is conducted in the framework of a Reliability Based Design Optimization (RBDO) problem. Presented model considers material, structural and modeling uncertainties. In the second stage, the fiber distribution optimization (with the aim to further increase in structural reliability) is performed by defining a fiber distribution function through a Non-Uniform Rational BSpline (NURBS) surface. The advantages of using the NURBS surface as a fiber distribution function include: using the same data set for the optimization and analysis; high convergence rate due to the smoothness of the NURBS; mesh independency of the optimal layout; no need for any post processing technique and its non-heuristic nature. The output of stage 1 (the optimal fiber content for homogeneously distributed fibers) is considered as the input of stage 2. The output of stage 2 is the Reliability Index (b ) of the structure with the optimal fiber content and distribution. First order reliability method (in order to approximate the limit state function) as well as different material models including Rule of Mixtures, Mori-Tanaka, energy-based approach and stochastic multi-scales are implemented in different examples. The proposed combined model is able to capture the role of available uncertainties in FRC structures through a computationally efficient algorithm using all sequential, NURBS and sensitivity based techniques. The methodology is successfully implemented for interfacial shear stress optimization in sandwich beams and also for optimization of the internal cooling channels in a ceramic matrix composite. Finally, after some changes and modifications by combining Isogeometric Analysis, level set and point wise density mapping techniques, the computational framework is extended for topology optimization of piezoelectric / flexoelectric materials. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2016,1 KW - Optimization KW - Fiber Reinforced Composite KW - Finite Element Method KW - Isogeometric Analysis KW - Flexoelectricity KW - Finite-Elemente-Methode KW - Optimierung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20161117-27042 ER - TY - JOUR A1 - Takagi, Kousuke A1 - Tani, Akinori A1 - Kawamura, Hiroshi T1 - Research on Intelligent Fuzzy Optimal Active and Hybrid Control Systems of Building Structures - Verification of Optimization Method on Switching Rules of Control Forces N2 - Recently, many reseraches on active control systems of building structures are preformed based on modern control theory and are installed real buildings. The authors have already proposed intelligent fuzzy optimal active control (IFOAC) systems. IFOAC systems imitate intelligent activities of human brains such as prediction, adaptation, decision-kaking and so on. In IFOAC systems, objective and subjective judgements on the active control can be taken into account. However, IFOAC systems are considered to be suitable for far-field erathquake and control effect becomes small in case of near-field earthqaukes which include a few velosity pules with large amplitudes. To improve control effect in case of near-souece earthquakes, the authors have also proposed hybrid control (HC) systems, in which IFOAC systems and fuzzy control system are combined. In HC systems, the fuzzy control systems are introduced as a reflective fuzzy active control (RFAC) system and imitates spinal reflection of human. In HC systems, active control forces are activated to buildings in accordance with switching rules on active control forces. In this paper, optimizations on fuzzy control rules in RFAC system and switching rules of active control forces in HC system are performed by Parameter-Free Genetic Algorithms (PfGAs). Here, the optimization is performed by using different earthquake inputs. The results of digital simulations show that the HC system can reduce maximal response displacements under restrictions on strokes of the actuator effectively in case of a near-source earthquake and the effectiveness of the proposed HC system is discussed and clarified. KW - Mehragentensystem KW - Lernendes System KW - Fuzzy-Logik KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2238 ER - TY - CHAP A1 - Dzwigon, Wieslaw T1 - Qualität im ÖPNV – die Erhöhung und das Erhalten der Frequenz T1 - Qualität im ÖPNV - Die Möglichkeiten der Verbesserung und die optimale Gestaltung N2 - Um die entsprechende Qualität der ÖPNV zu erreichen, sollte man das Verhältnis zwischen der Bedienungsqualität und dem Kostenaufwand analysieren. In den Bedingungen der anwachsenden Konkurenz aus der Seite der PKW und anderen Fuhrunternehmern soll man die Handlungen, die grösste Effektivität gewährleisten, aufnehmen. Es gibt viele Möglichkeiten die diese Qualität verbessern können, wie z.B. steigernde Frequenz der Fahrzeuge, Vergrößerung der Geschwindigkeit, Pünktlichkeit und Regelmäßigkeit, Einführung der Niederfußfahrzeuge und vieles mehr. Ich versuche in meinem Referat die Aspekte zu analysieren, die mit der Frequenz verbunden sind, d.h. die Erhöhung der Frequenz und das Erhalten der konstanten Häufigkeit der Linienbusse. Das Referat umfasst die Modelle und die Beispiele. In Verbindung mit den Untersuchungen, die die Bereitschaft der Bezahlung für die Verbesserung der Qualität betreffen, kann man schon Entscheidungen treffen, die unterschiedlichen Standard der Fahrt bestimmen. KW - Öffentlicher Personennahverkehr KW - Optimierung KW - Kostenanalyse Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2968 ER -