TY - CHAP A1 - Heuer, Andreas ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - THREE–DIMENSIONAL MODELING OF CONCRETE WITH DAMAGE AND PLASTICITY N2 - The concrete is modeled as a material with damage and plasticity, whereat the viscoplastic and the viscoelastic behaviour depends on the rate of the total strains. Due to the damage behaviour the compliance tensor develops different properties in tension and compression. There have been tested various yield surfaces and flow rules, damage rules respectively to their usability in a concrete model. One three-dimensional yield surface was developed from a failure surface based on the Willam--Warnke five-parameter model by the author. Only one general uni-axial stress-strain-relation is used for the numeric control of the yield surface. From that curve all necessary parameters for different strengths of concrete and different strain rates can be derived by affine transformations. For the flow rule in the compression zone a non associated inelastic potential is used, in the tension zone a Rankine potential. Conditional on the time-dependent formulation, the symmetry of the system equations is maintained in spite of the usage of non-associated potentials for the derivation of the inelastic strains. In case of quasi statical computations a simple viscoplastic law is used that is rested on an approach to Perzyna. The principle of equality of dissipation power in the uni-axial and the three-axial state of stress is used. It is modified by a factor that depends on the actual stress ratio and in comparison with the Kupfer experiments it implicates strains that are more realistic. The implementation of the concrete model is conducted in a mixed hybrid finite element. Examples in the structural level are introduced for verification of the concrete model. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29671 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Klingert, Maik ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - THE USAGE OF IMAGE PROCESSING METHODS FOR INTERPRETATION OF THERMOGRAPHY DATA N2 - For assessment of old buildings, thermal graphic analysis aided with infra-red camera have been employed in a wide range nowadays. Image processing and evaluation can be economically practicable only if the image evaluation can also be automated to the largest extend. For that reason methods of computer vision are presented in this paper to evaluate thermal images. To detect typical thermal image elements, such as thermal bridges and lintels in thermal images respectively gray value images, methods of digital image processing have been applied, of which numerical procedures are available to transform, modify and encode images. At the same time, image processing can be regarded as a multi-stage process. In order to be able to accomplish the process of image analysis from image formation through perfecting and segmentation to categorization, appropriate functions must be implemented. For this purpose, different measuring procedures and methods for automated detection and evaluation have been tested. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29777 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Knauer, Uwe A1 - Dammeier, T. A1 - Meffert, Beate ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - THE STRUCTURE OF ROAD TRAFFIC SCENES AS REVEALED BY UNSUPERVISED ANALYSIS OF THE TIME AVERAGED OPTICAL FLOW N2 - The Lucas-Kanade tracker has proven to be an efficient and accurate method for calculation of the optical flow. However, this algorithm can reliably track only suitable image features like corners and edges. Therefore, the optical flow can only be calculated for a few points in each image, resulting in sparse optical flow fields. Accumulation of these vectors over time is a suitable method to retrieve a dense motion vector field. However, the accumulation process limits application of the proposed method to fixed camera setups. Here, a histogram based approach is favored to allow more than a single typical flow vector per pixel. The resulting vector field can be used to detect roads and prescribed driving directions which constrain object movements. The motion structure can be modeled as a graph. The nodes represent entry and exit points for road users as well as crossings, while the edges represent typical paths. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29780 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Liu, Chong T1 - The Contemporary Development of Qingdao's Urban Space - The Perspective of Civil Society's Participation in Chinese Urban Planning N2 - The main hypothesis of this research is that civil society’s participation is able to improve the planning results in the Chinese city of Qingdao in the contemporary age. Qingdao is a young city developed from a German colony in eastern China. Apart from the powers of the government and the market, the 'third power', including mainly the power of volunteer citizens and the citizens’ organisations, also positively promoted the spatial development in Qingdao’s history. Since 1978’s reform, Qingdao’s great progress in urban housing, historic preservation, public space and urban traffic results mainly from the increasing strength of both the government and the market, while the government has always been the dominant promoter for urban construction. The actual planning mechanism – the government formulates 'what to do' itself and decides 'how to do it' with the market – has much limit in reacting to the rapidly changing situation, serving diversified social interests, and raising sufficient funds for the city’s urgent demands in Qingdao. Searching for new development strategies based on the understanding of civil society in the Chinese context can provide a promising perspective on the urban studies of Qingdao. Chinese civil society can be understood as the intermediate sphere of individuals, families, citizen’s organisations, social movements, public communication, and of the non-governmental body’s non-for-profit involvement for the provision of public services between the state and the market. China has its own cultural tradition of civil society, and the modern civil society in China is showing its great potential in improving social integration and urban life. The Chinese government has started to advocate for civil society’s participation in urban construction, and encouraging the 'bottom-up' mechanism in the planning-related issues through political statements and legislative approaches since the last two decades. The existing planning practice in China is able to demonstrate that civil society’s participation helps improve the quality of Chinese urban planning realistically under present conditions, and that moderation of planning experts and the push of the authority are the key factors for successfully integrating the strength of civil society in planning. However, the power of civil society is not yet sufficiently discovered in Qingdao’s planning. For better planning results, the city of Qingdao needs more initiatives to mobilize civil society in the planning practice, as well as more support to enrich the related studies. This thesis recommends that Qingdao establishes the 'Foundation for Collaborative Urban Solutions' through the joint efforts of the authority and civil initiatives, which aims at moderating and facilitating the strength of civil society. The suggested pilot projects include: a. The Community-based Housing Workshop for regenerating the living environment of the run-down communities, where the residents are willing to collaborate with the foundation with own efforts. b. The Heritage Preservation Workshop for suggesting an efficient supervision mechanism involving civil society which protects the historic heritage from being destroyed in the urban construction. c. The Public Space Forum for improving accessibility, quantity and ecologic function in the development of Qingdao’s urban public space with the knowledge and creativity of both the government and the citizens. d. The Mass Transport Forum for a realistic strategy for funding the rail-based traffic system in Qingdao through enabling the civil society - especially the individual citizens and their households to invest. The 'Foundation of Collaborative Urban Solutions' is able to improve Qingdao’s planning to cope with the urban problems the city are facing in its contemporary development, as well as to provide valuable reference for the further research of civil society’s participation in Chinese urban planning. N2 - Die Haupthypothese dieser Arbeit ist, dass durch Beteiligung der Zivilgesellschaft am Planungsprozess die Planungsergebnisse in der chinesischen Stadt Qingdao in der gegenwärtigen Zeit verbessert werden können. Durch das schnelle Wachstum vom kleinen Fischerdorf zu modernen Metropole, sind die stadtplanerischen Erfahrungen in Qingdao stark an die Adaption moderner Planungsideen einerseits und an die dominierende städtische Planungsbehörde andererseits geknüpft. Abgesehen vom Einfluss der Zentralmacht trug auch die nicht-staatliche Seite, dazu zählen die Bürgerbewegungen und die Wirtschaftsverbände, zur räumlichen Entwicklung Qingdaos bei. Seit der 'Reform 1978' hat Qingdao große Fortschritte beim städtischen Wohnungswesen, beim Denkmalschutz, beim öffentlichen Raum und städtischen Verkehr gemacht. Nicht nur der Umfang, sondern auch die Qualität des städtischen Raumes hat sich erheblich verbessert. Die beachtlichen Leistungen sind das Ergebnis zunehmender gemeinsamer Anstrengungen der Regierung und des Marktes, wenngleich die staatliche Seite immer die treibende Kraft der städtebaulichen Entwicklung war. Der gegenwärtige Planungsvollzug – bei dem die Regierung selbst vorgibt 'was zu tun ist' und gemeinsam mit dem Markt entscheidet 'wie dies zu tun ist' – enge Grenzen besitzt, wenn es gilt, auf schnell verändernde Situationen zu reagieren, unterschiedliche soziale Interessen zu bedienen oder ausreichend finanzielle Mittel für dringende städtische Probleme zur Verfügung zu stellen. Die Suche nach neuen Entwicklungsstrategien, die auf einem Verständnis der Zivilgesellschaft im Kontext Chinas basieren, kann eine aussichtsreiche Perspektive für stadtplanerische Untersuchungen Qingdaos bieten. Im einem Verständnis des sozialen Wandels in China, definiert sich die Zivilgesellschaft aus einem Sphäre von Individuen, Familien, Bürgerorganisationen, sozialen Bewegungen, öffentlichen Kommunikation heraus und aus den nichtstaatlichen Institutionen des 'non-for-profit Involvements' zur Einrichtung öffentlicher Dienstleistungen zwischen Staat und Markt. Es gibt ausreichend Beweise dafür, das China in seiner eigenen Kultur über viele Quellen einer Zivilgesellschaft verfügt. Die vorhandene stadtplanerische Praxis in China kann auf ihre Weise zeigen, das Bürgerbeteiligung dabei hilft, die Qualität der Stadtplanung unter gegebenen Bedingungen in realistischer Weise zu verbessern. Außerdem sind Moderation im Planungsprozess und der Antrieb durch die Regierung, zwei wichtige Schlüsselfaktoren, zur erfolgreichen Einbindung des Einflusses bürgerlicher Beteiligung im Planungsprozess. Allerdings wurde die Bedeutung der zivilgesellschaft für die Stadtplanung Qingdaos bisher noch nicht ausreichend untersucht. Um bessere Ergebnisse im Planungsprozess zu erzielen, braucht die Stadt Qingdao mehr Initiativen, die die Gesellschaft im Planungsprozess mobilisieren und auch mehr Unterstützung dabei, ähnliche Studien mit Erkenntnissen anzureichern. Diese These befürwortet, dass Qingdao eine “Foundation for Collaborative Urban Solutions” für gemeinsame Bemühungen der Regierung und bürgerlicher Initiativen einrichten sollte, die auf einen erleichterten und angemessenen Einfluss der Zivilgesellschaft in Planungen zielt. Die vorgeschlagenen Pilotprojekte beinhalten. a. Ein 'Community-based Housing Workshop' um das Lebensumfeld in den heruntergekommenen Gemeinden zu regenerieren, wo ortsansässige Willens sind, durch eigene Anstrengungen mit der Stiftung zusammenzuarbeiten. b. Den 'Heritage Preservation Workshop' um einen effizienten Supervisionsprozess unter Einbeziehung der Zivilgesellschaft anzuregen, der das historische Erbe vor Zerstörung im städtischen Aufbau beschützt. c. Ein 'Public Space Forum' um Zugänglichkeit, Ausmaß und ökologische Funktion bei der Entwicklung des öffentlichen Raumes in Qingdao zu verbessern, mit dem Wissen und der Kreativität sowohl der Regierung als auch der Bürger. d. Das 'Mass Transport Forum' für eine realistische Strategie zur Förderung eines schienenbasierten Verkehrssystems in Qingdao, die der Gesellschaft, speziell auch dem einzelnen Bürger ermöglichen soll sich zu beteiligen. Einer 'Foundation of Collaborative Urban Solutions' ist es möglich, Qingdaos Planungen zu unterstützen und die städtebaulichen Schwierigkeiten - denen die Stadt in der gegenwärtigen Entwicklung gegenübersteht - zu bewältigen. Ebenso ist sie fähig, wertvolle Hinweise für weitergehende Untersuchungen, zu Bürgerbeteiligung in der Stadtplanung Chinas, zu liefern. T2 - Die gegenwärtige räumliche Entwicklung Qingdaos - Perspektiven zivilgesellschaftlicher Beteiligung an der Stadtplanung Chinas KW - Stadtplanung KW - Beteiligung KW - Tsingtau KW - China KW - Zivilgesellschaft KW - civil society Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070818-9159 ER - TY - CHAP A1 - Ebling, Julia A1 - Scheuermann, G. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - TEMPLATE MATCHING ON VECTOR FIELDS USING CLIFFORD ALGEBRA N2 - Due to the amount of flow simulation and measurement data, automatic detection, classification and visualization of features is necessary for an inspection. Therefore, many automated feature detection methods have been developed in recent years. However, only one feature class is visualized afterwards in most cases, and many algorithms have problems in the presence of noise or superposition effects. In contrast, image processing and computer vision have robust methods for feature extraction and computation of derivatives of scalar fields. Furthermore, interpolation and other filter can be analyzed in detail. An application of these methods to vector fields would provide a solid theoretical basis for feature extraction. The authors suggest Clifford algebra as a mathematical framework for this task. Clifford algebra provides a unified notation for scalars and vectors as well as a multiplication of all basis elements. The Clifford product of two vectors provides the complete geometric information of the relative positions of these vectors. Integration of this product results in Clifford correlation and convolution which can be used for template matching of vector fields. For frequency analysis of vector fields and the behavior of vector-valued filters, a Clifford Fourier transform has been derived for 2D and 3D. Convolution and other theorems have been proved, and fast algorithms for the computation of the Clifford Fourier transform exist. Therefore the computation of Clifford convolution can be accelerated by computing it in Clifford Fourier domain. Clifford convolution and Fourier transform can be used for a thorough analysis and subsequent visualization of flow fields. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29464 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Sorge, Hans-Christian T1 - Technische Zustandsbewertung metallischer Wasserversorgungsleitungen als Beitrag zur Rehabilitationsplanung T1 - Technical condition assessment of metallic water supply pipes as part of their rehabilitation planning N2 - Die Instandhaltung der städtischen Trinkwassernetze ist Aufgabenschwerpunkt der Wasserversorgungsunternehmen bzw. Netzbetreiber. Dazu notwendige Rehabilitationsplanungen stützen sich zurzeit weitgehend auf die Trendprognose von Schadensraten und die Erfahrungen der Mitarbeiter. Der Einfluss wesentlicher Kenngrößen wie Werkstoffeigenschaften oder die Resttragfähigkeit des Rohres bleiben hierbei größtenteils unberücksichtigt. Über materialtechnische Untersuchungen werden die notwendigen Kenngrößen ermittelt, die eine zuverlässige Bewertung des technischen Zustands des Rohrstrangs ermöglichen. So lassen sich die Prognose der technischen Nutzungsdauer und Rehabilitationsplanungen auf eine solide Basis stellen. In dieser Dissertationsschrift wird hierzu ein Untersuchungs- und Bewertungsalgorithmus mit integrierten Prognoseverfahren erarbeitet. N2 - The maintenance of water supply systems is the main task for water utilities. The requisite planning of rehabilitation/ maintenance is based on forecasting methods of failure frequency of water mains and the experience of the staff. But the influences of important parameters like material characteristics or remaining structural load capacity are mostly unconsidered. Technical tests and the analysis of the properties of the pipe material provide specific parameters. These parameters allow forecasting methods of the operating life and the planning of rehabilitation on a sound basis. Therefore algorithms for examination and assessments with integrated forecast methods were created in this dissertation. KW - Instandhaltungsplanung KW - Nutzungsdauer KW - Rohrleitung KW - Korrosionsprüfung KW - Metallographie KW - Prognosemodell KW - technische Nutzungsdauer KW - Korrosionsgeschwindigkeit KW - Resttragfähigkeit KW - Bodenaggressivität KW - Wasserversorgung KW - Maintenance KW - remaining load capacitiy KW - leakages Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070516-8681 ER - TY - CHAP ED - Professur Baubetrieb und Bauverfahren, T1 - Tag des Baubetriebs 2006 - Tagungsbeiträge "Nachtragsmanagement in Praxis und Forschung" N2 - Die Fachtagung richtete sich an Geschäftsführer, Projektleiter, Bauleiter und Projektsteuerer in Planung und Ausführung mit Beiträgen zum Nachtrags- und Änderungsmanagement am Bau, Workflow-Management in der Baupraxis, Integration von Informationsprozessen auf der Basis von Nemetschek Technologien sowie Kompetenzaufbau durch gezielte Weiterbildung. KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7498 ER - TY - CHAP A1 - Bultheel, Adhemar A1 - Jansen, M. A1 - Maes, J. A1 - Van Aerschot, W. A1 - Vanraes, E. ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - SUBDIVIDE AND CONQUER RESOLUTION N2 - This contribution will be freewheeling in the domain of signal, image and surface processing and touch briefly upon some topics that have been close to the heart of people in our research group. A lot of the research of the last 20 years in this domain that has been carried out world wide is dealing with multiresolution. Multiresolution allows to represent a function (in the broadest sense) at different levels of detail. This was not only applied in signals and images but also when solving all kinds of complex numerical problems. Since wavelets came into play in the 1980's, this idea was applied and generalized by many researchers. Therefore we use this as the central idea throughout this text. Wavelets, subdivision and hierarchical bases are the appropriate tools to obtain these multiresolution effects. We shall introduce some of the concepts in a rather informal way and show that the same concepts will work in one, two and three dimensions. The applications in the three cases are however quite different, and thus one wants to achieve very different goals when dealing with signals, images or surfaces. Because completeness in our treatment is impossible, we have chosen to describe two case studies after introducing some concepts in signal processing. These case studies are still the subject of current research. The first one attempts to solve a problem in image processing: how to approximate an edge in an image efficiently by subdivision. The method is based on normal offsets. The second case is the use of Powell-Sabin splines to give a smooth multiresolution representation of a surface. In this context we also illustrate the general method of construction of a spline wavelet basis using a lifting scheme. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29091 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - RPRT A1 - Schaber, Carsten T1 - Strategic Developments T2 - Yearbook of Model Projects 2005 / 2006 N2 - The report is about the role of Regional Development Agencies (RDAs)in England. These were founded in 1999. At first their concept, aims and orgins are addressed. Secondly the work of such an agency is explained exemplary by introducing the monitoring report Strategic Developments. KW - Landesentwicklungsgesellschaft KW - Strategische Planung KW - Strategische Projekte KW - LEG KW - Monitoring Bericht KW - Strategic Development KW - RDA KW - Monitoring Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8207 ER - TY - CHAP A1 - Broßmann, Marko A1 - Müller, Karl-Heinz ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - STOCHASTISCHE ANALYSE VON STAHLBETONBALKEN IM GRENZZUSTAND DER ADAPTION UNTER BERüCKSICHTIGUNG DER STEIFIGKEITSDEGRADATION N2 - Am Beispiel eines 3-feldrigen Durchlaufträgers wird die Versagenswahrscheinlichkeit von wechselnd belasteten Stahlbetonbalken bezüglich des Grenzzustandes der Adaption (Einspielen, shakedown) untersucht. Die Adaptionsanalyse erfolgt unter Berücksichtigung der beanspruchungschabhängigen Degradation der Biegesteifigkeit infolge Rissbildung. Die damit verbundene mechanische Problemstellung kann auf die Adaptionsanalyse linear elastisch - ideal plastischer Balkentragwerke mit unbekannter aber begrenzter Biegesteifigkeit zurückgeführt werden. Die Versagenswahrscheinlichkeit wird unter Berücksichtigung stochastischer Tragwerks- und Belastungsgrößen berechnet. Tragwerkseigenschaften und ständige Lasten gelten als zeitunabhängige Zufallsgrößen. Zeitlich veränderliche Lasten werden als nutzungsdauerbezogene Extremwerte POISSONscher Rechteck-Pulsprozesse unter Berücksichtigung zeitlicher Überlagerungseffekte modelliert, so dass die Versagenswahrscheinlichkeit ebenfalls eine nutzungsdauerbezogene Größe ist. Die mechanischen Problemstellungen werden numerisch mit der mathematischen Optimierung gelöst. Die Versagenswahrscheinlichkeit wird auf statistischem Weg mit der Monte-Carlo-Methode geschätzt. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29341 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER -