TY - THES A1 - Zellmann, Hans-Dieter T1 - Metaphosphat – modifizierte Silikatbinder als Basis säurebeständiger Beschichtungsmaterialien T1 - Metaphosphate modified silica-binder for acid resistant coating materials N2 - Mörtel basierend auf erhärtetem Wasserglas als Binder weisen eine ausgesprochen gute Beständigkeit im Kontakt mit stark sauren Medien auf; unzureichend hingegen ist die che-mische Beständigkeit im Kontakt mit alkalischen bis schwachsauren Medien. Ziel der Un-tersuchungen ist eine Verbesserung der Wasserbeständigkeit von Natriumsilikatbindern durch gezielte chemische Modifikation mit verschiedenen Metaphosphaten. Durch eine systematische Charakterisierung der Zusammensetzung und des strukturellen Aufbaus der Binder werden dabei die Ursachen der bindertypischen Eigenschaften aufgeklärt. Eine Modifikation der Natriumsilikatlösung mit Natriumtrimetaphosphat hat eine Erhöhung des Kondensationsgrades und eine verbesserte mechanische Beständigkeit des verfestig-ten Natriumsilikatbinders zur Folge. Durch die reaktive Bindung der Basizität der Natriumsi-likatlösung beim Abbau der Metaphosphatstruktur wird die Wasserbeständigkeit mit Natri-umtrimetaphosphat modifizierter Natriumsilikatmörtel erhöht. Die gute Beständigkeit im Kontakt mit hochkonzentrierter Schwefelsäure bleibt nahezu unverändert erhalten. Eine Modifikation der Natriumsilikatlösung mit Aluminiumtetrametaphosphat führt durch Reaktion beider Komponenten miteinander zur Bildung eines alumosilikatischen Netzwer-kes. Das alumosilikatische Netzwerk des mit Aluminiumtetrametaphosphat modifizierten Natriumsilikatbinders ist auch in einer stark alkalischen Natriumhydroxidlösung beständig. Die gute Beständigkeit des Binders im Kontakt mit hochkonzentrierter Schwefelsäure bleibt trotz des Aluminates im Bindernetzwerk erhalten. N2 - Mortars based on hardened water glass as binding agent present a very good resistance in contact with strongly acid fluids. Insufficient, however, is the chemical resistance in contact with alkaline to weakly acid fluids. Aim of the investigations is an improvement of the water resistance of sodium silicate binders by specific chemical modifications through various metaphosphates. Thereby the causes of the binder specific properties are defined by a systematic characterization of the composition and of the structure of the binders. A modification of the sodium silicate solution by sodium trimetaphosphate produces an in-crease of the condensation degree and an improved mechanical resistance of the solidified sodium silicate binder. The water resistance of sodium silicate mortars modified by sodium trimetaphosphate is increased by the reactive binding of the basicity of the sodium silicate solution during the reduction of the metaphosphate structure. The good resistance in con-tact with highly concentrated sulphuric acid is kept nearly unchanged. A modification of the sodium silicate solution by aluminium tetrametaphosphate produces due to the reaction of both components the formation of an aluminosilicate network. The aluminosilicate network of the sodium silicate binder modified by aluminium tetrameta-phosphate also remains resistant in a strongly alkaline sodium hydroxide solution. The good resistance of the binder in contact with highly concentrated sulphuric acid is main-tained despite the aluminate in the binder network. KW - Wasserglas KW - Mörtel KW - Metaphosphat KW - säurefeste Beschichtungen KW - water-glass KW - metaphosphate KW - motars KW - acid resistant coating material Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20081127-14385 ER - TY - THES A1 - Zeh, Rainer T1 - Die Zugfestigkeit bindiger Böden als Kriterium der Rissgefährdung mineralischer Oberflächenabdichtungen T1 - The tensile strength of cohesive soils as cracking criteria of mineral cover linings N2 - Oberflächenabdichtungen von Deponien sind in ihrer langfristigen Funktion häufig durch eine austrocknungsbedingter Rissbildung der mineralischen Dichtungskomponente gefährdet. Als Ursachen gelten insbesondere das standortspezifische Klima mit den stark schwankenden Randbedingungen (Niederschlag, Temperatur), Pflanzen und Tiere sowie auch ein ungeeigneter Systemaufbau. Durch einen Wasserentzug treten Schrumpfungsprozesse in der mineralischen Dichtung auf welche über negative Dehnungen zu Dehnungsbrüchen und damit zu einer Rissbildung führen. Für die Beanspruchbarkeit eines Dichtungsmaterials bei Wasserentzug sind insbesondere dessen Schrumpfverhalten und dessen Zugfestigkeit von Bedeutung. Beide Eigenschaften wurden durch eigens konzipierte Laborversuche beispielhaft an zwei typischen Dichtungsböden untersucht. Die Ergebnisse zeigen eine große Abhängigkeit von der Wasserspannung sowie von der Bodenstruktur. Für die Zugfestigkeit und dem daraus abgeleiteten Dehnungsmodul gilt z. B. jeweils eine eindeutige Zunahme mit Zunahme der Wasserspannungen. Mit Hilfe der Ergebnisse aus den Laborversuchen sowie numerischen Berechnungen des Was-serhaushaltes und der vorherrschenden Spannungen kann eine erste Rissgefährdungsabschätzung für mineralische Dichtungen in Oberflächenabdichtungen abgeleitet und angewandt werden. Weitere Erläuterungen z. B. zu den Eigenschaften und der Teilsättigung bindiger Böden, analytische Zugfestigkeitsberechnungen oder Empfehlungen zum Entwurf und der Herstellung von Oberflächenabdichtungen ergänzen die Arbeit. N2 - The long-term function of cover lining systems of landfills is endangered by desiccation and cracking of the compacted clay liner. The specific climate at the landfill location with its varying conditions (precipitation, temperature), plants and animals or also an inappropriate cover lining system are the causes of these phenomena. Dewatering and desiccation of compacted clay liners produce negative strains and after that strain rupture or cracking. The shrinkage behaviour and the tensile strength of a cover lining material are very important for its capacity. Both characteristics were examined by self-designed laboratory tests which were conducted on two typical cover lining materials. The results show a strong dependency on the suction and on the soil structure. The tensile strength as well as the derived E-modulus increase with increasing suction for example. A first estimation of cracking risk in compacted clay liners of cover lining systems can be derived and used by the presented laboratory test results, numeric calculations of the water balance and the predominant stresses. Further explanations as e. g. the characteristics and unsaturation of cohesive soils, analytic calculations of the tensile strength or recommendations to the design and the production of cover lining systems complete the thesis. KW - Deponiebau KW - Zugfestigkeit KW - Rissbildung KW - Wasserhaushalt KW - Oberflächenabdichtung KW - Teilsättigung KW - landfill cover lining system KW - tensile strength KW - cracking KW - unsaturation KW - water balance Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070522-8692 ER - TY - THES A1 - Zacharias, Christin T1 - Numerical Simulation Models for Thermoelastic Damping Effects N2 - Finite Element Simulations of dynamically excited structures are mainly influenced by the mass, stiffness, and damping properties of the system, as well as external loads. The prediction quality of dynamic simulations of vibration-sensitive components depends significantly on the use of appropriate damping models. Damping phenomena have a decisive influence on the vibration amplitude and the frequencies of the vibrating structure. However, developing realistic damping models is challenging due to the multiple sources that cause energy dissipation, such as material damping, different types of friction, or various interactions with the environment. This thesis focuses on thermoelastic damping, which is the main cause of material damping in homogeneous materials. The effect is caused by temperature changes due to mechanical strains. In vibrating structures, temperature gradients arise in adjacent tension and compression areas. Depending on the vibration frequency, they result in heat flows, leading to increased entropy and the irreversible transformation of mechanical energy into thermal energy. The central objective of this thesis is the development of efficient simulation methods to incorporate thermoelastic damping in finite element analyses based on modal superposition. The thermoelastic loss factor is derived from the structure's mechanical mode shapes and eigenfrequencies. In subsequent analyses that are performed in the time and frequency domain, it is applied as modal damping. Two approaches are developed to determine the thermoelastic loss in thin-walled plate structures, as well as three-dimensional solid structures. The realistic representation of the dissipation effects is verified by comparing the simulation results with experimentally determined data. Therefore, an experimental setup is developed to measure material damping, excluding other sources of energy dissipation. The three-dimensional solid approach is based on the determination of the generated entropy and therefore the generated heat per vibration cycle, which is a measure for thermoelastic loss in relation to the total strain energy. For thin plate structures, the amount of bending energy in a modal deformation is calculated and summarized in the so-called Modal Bending Factor (MBF). The highest amount of thermoelastic loss occurs in the state of pure bending. Therefore, the MBF enables a quantitative classification of the mode shapes concerning the thermoelastic damping potential. The results of the developed simulations are in good agreement with the experimental results and are appropriate to predict thermoelastic loss factors. Both approaches are based on modal superposition with the advantage of a high computational efficiency. Overall, the modeling of thermoelastic damping represents an important component in a comprehensive damping model, which is necessary to perform realistic simulations of vibration processes. N2 - Die Finite-Elemente Simulation von dynamisch angeregten Strukturen wird im Wesentlich durch die Steifigkeits-, Massen- und Dämpfungseigenschaften des Systems sowie durch die äußere Belastung bestimmt. Die Vorhersagequalität von dynamischen Simulationen schwingungsanfälliger Bauteile hängt wesentlich von der Verwendung geeigneter Dämpfungsmodelle ab. Dämpfungsphänomene haben einen wesentlichen Einfluss auf die Schwingungsamplitude, die Frequenz und teilweise sogar die Existenz von Vibrationen. Allerdings ist die Entwicklung von realitätsnahen Dämpfungsmodellen oft schwierig, da eine Vielzahl von physikalischen Effekten zur Energiedissipation während eines Schwingungsvorgangs führt. Beispiele hierfür sind die Materialdämpfung, verschiedene Formen der Reibung sowie vielfältige Wechselwirkungen mit dem umgebenden Medium. Diese Dissertation befasst sich mit thermoelastischer Dämpfung, die in homogenen Materialien die dominante Ursache der Materialdämpfung darstellt. Der thermoelastische Effekt wird ausgelöst durch eine Temperaturänderung aufgrund mechanischer Spannungen. In der schwingenden Struktur entstehen während der Deformation Temperaturgradienten zwischen benachbarten Regionen unter Zug- und Druckbelastung. In Abhängigkeit von der Vibrationsfrequenz führen diese zu Wärmeströmen und irreversibler Umwandlung mechanischer in thermische Energie. Die Zielstellung dieser Arbeit besteht in der Entwicklung recheneffizienter Simulationsmethoden, um thermoelastische Dämpfung in zeitabhängigen Finite-Elemente Analysen, die auf modaler Superposition beruhen, zu integrieren. Der thermoelastische Verlustfaktor wird auf der Grundlage der mechanischen Eigenformen und -frequenzen bestimmt. In nachfolgenden Analysen im Zeit- und Frequenzbereich wird er als modaler Dämpfungsgrad verwendet. Zwei Ansätze werden entwickelt, um den thermoelastischen Verlustfaktor in dünn-wandigen Plattenstrukturen, sowie in dreidimensionalen Volumenbauteilen zu simulieren. Die realitätsnahe Vorhersage der Energiedissipation wird durch die Verifizierung an experimentellen Daten bestätigt. Dafür wird ein Versuchsaufbau entwickelt, der eine Messung von Materialdämpfung unter Ausschluss anderer Dissipationsquellen ermöglicht. Für den Fall der Volumenbauteile wird ein Ansatz verwendet, der auf der Berechnung der Entropieänderung und damit der erzeugte Wärmeenergie während eines Schwingungszyklus beruht. Im Verhältnis zur Formänderungsenergie ist dies ein Maß für die thermoelastische Dämpfung. Für dünne Plattenstrukturen wird der Anteil an Biegeenergie in der Eigenform bestimmt und im sogenannten modalen Biegefaktor (MBF) zusammengefasst. Der maximale Grad an thermoelastischer Dämpfung kann im Zustand reiner Biegung auftreten, sodass der MBF eine quantitative Klassifikation der Eigenformen hinsichtlich ihres thermoelastischen Dämpfungspotentials zulässt. Die Ergebnisse der entwickelten Simulationsmethoden stimmen sehr gut mit den experimentellen Daten überein und sind geeignet, um thermoelastische Dämpfungsgrade vorherzusagen. Beide Ansätze basieren auf modaler Superposition und ermöglichen damit zeitabhängige Simulationen mit einer hohen Recheneffizienz. Insgesamt stellt die Modellierung der thermoelastischen Dämpfung einen Baustein in einem umfassenden Dämpfungsmodell dar, welches zur realitätsnahen Simulation von Schwingungsvorgängen notwendig ist. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,8 KW - Werkstoffdämpfung KW - Finite-Elemente-Methode KW - Strukturdynamik KW - Thermoelastic damping KW - modal damping KW - decay experiments KW - energy dissipation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221116-47352 ER - TY - THES A1 - Zabel, Volkmar T1 - Anwendungen der Wavelet-Transformation in der Systemidentifikation T1 - Applications of Wavelet Analysis in System Identification N2 - Die meisten traditionellen Methoden der Systemidentifikation beruhen auf der Abbildung der Meßwerte entweder im Zeit- oder im Frequenzbereich. In jüngerer Zeit wurden im Zusammenhang mit der Systemidentifikation Verfahren entwicklet, die auf der Anwendung der Wavelet-Transformation beruhen. Das Ziel dieser Arbeit war, einen Algorithmus zu entwickeln, der die Identifikation von Parametern eines Finite-Elemente-Modells, das ein experimentell untersuchtes mechanisches System beschreibt, ermöglicht. Es wurde eine Methode erarbeitet, mit deren Hilfe die gesuchten Parameter durch Lösen eines Systems von Bewegungsgleichungen im Zeit-Skalen-Bereich ermittelt werden. Durch die Anwendung dieser Darstellung können Probleme, die durch Rauschanteile in den Meßdaten entstehen, reduziert werden. Die Ergebnisse numerischer Simulation und einer experimentellen Studie bestätigen die Vorteile einer Anwendung der Wavelet-Transformation in der vorgeschlagenen Weise. ... N2 - Most traditional methods in system identification are based on the analysis of measured data in either the time or frequency domain. In recent years some procedures were developed that apply wavelet analysis in the context of system identification. The purpose of this study was to develop an algorithm that allows for identifying the parameters of a finite element model that describes a tested mechanical system. A method has been derived that determines the desired parameters by solving a system of equations of motion in the time-scale domain. ... KW - Wavelet KW - Systemidentifikation KW - Verbindungskoeffizienten KW - Schädigungsindikator KW - Dynamik KW - Strukturdynamik KW - wavelet KW - system identification KW - connection coefficients KW - damage indicator KW - dynamics Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040202-66 ER - TY - THES A1 - Yuli, Nensi Golda T1 - The Spatial Concept at Moslem Settlements in Current Context of Modern Indonesia Using Phenomenology Method . Case Study: Pathok Negoro Area in Yogyakarta, Indonesia N2 - Settlement is human place to live and do various activities (Finch, 1980). Concept of settlement layout is closely associated with human and a set of thoughts and behaviors. In this case, idea of pattern of activities in a society that is core of a culture becomes main factor in process of formation of houses and environment in a settlement. Factors which affecting form (physical) of architecture in a settlement environment are socio-cultural, economic, and religious determinant factor that manifested architectural realization (Rapoport, 1969). Yogyakarta as the continuation of kingdom city in the Java Island finally exists as an Islamic kingdom that still remain to survive up to now. Impacts of this issue is appearance of various Moslem settlements to support typical character of an Islamic Kingdom. Mlangi is an area of oldest Moslem settlements in Yogyakarta has not been explored in details for progress especially in physical glasses recently. Everything basic group and individual who arrange houses and residences, starts from how it has spatial concept alone. Although concept is a very abstract thing to explain in details, but its existence can be detected by how they created their physical environment. This research conducted by these research questions: (1) What are spatial concepts owned by people in Mlangi and (2) How do spatial concepts owned by the people affect the settlements pattern? Process to search spatial concept owned by the people in Moslem residence, making Mlangi as study area, was approached by using phenomenological research method. The researcher have to self-involved directly in unstructured interviews, but remained in guideline framework of in interviews to make research process effective. Fistly, the researcher interviewed the key person, they are the head of Mlangi administration (pak Dukuh) in Mlangi and Sawahan. They were then give advices to who was capable person that could draw the spatial concept and had many story and knew the history of the settlements. Step by step of interview guided from one informant to next informant when the information had been told repeatedly. The next informant based on the last informant advice or who had close relationship with the last theme appeared. To complete the narration and draw the result of interview, researcher have to add additional information with photograph and descriptive picture that can be draw the settlement empirically. In process, 17 information units which found in field were consistent with sequence of interview events and flowing of theme to theme associated with Moslem residence of residence. Finally the interviews succeeded in abstracting 16 themes that may be classified into historic, socio-cultural, and spatial-concept dimensions in Mlangi. Process of analysis to find spatial concept owned by the people in Moslem settlements was carried out by dialogue of themes to find available substantive relationship. Four concepts successfully analyzed consist of concepts of personage, concept of religious implementation, concept of Jero-Jaba and concept of Interest. The four concepts are really associated with one and others in understanding how spatial concept owned by the people affects residence they occupy. Yet, concept of Jero-Jaba bases all concepts of people in Mlangi . This concept can be used to draw red yarn on how they utilize communal spaces in residence and layout rooms of their individual houses. This concept also eternalize residence patterns existing in Mlangi now where residence does not experience many changes from starting of this residence existence (from detection of generation currently still living), namely residence patterns concentrate on orientation to Masjid Pathok Negoro of Mlangi. This research was opening the potential research area, at least for the sociology, anthropology and demography research interest. So many unique character in Mlangi if looked at from how they maintain their spatial concept and manifested in their daily activities. How the people will concern only for the religious activities and the economic concern only for survival aspect in live. Keywords: spatial concept, moslem settlements, phenomenology method, Indonesia, KW - Siedlung KW - spatial concept KW - Muslim KW - moslem settlements KW - phenomenology method KW - Indonesia Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170419-31257 ER - TY - THES A1 - Yousefi, Hassan T1 - Discontinuous propagating fronts: linear and nonlinear systems N2 - The aim of this study is controlling of spurious oscillations developing around discontinuous solutions of both linear and non-linear wave equations or hyperbolic partial differential equations (PDEs). The equations include both first-order and second-order (wave) hyperbolic systems. In these systems even smooth initial conditions, or smoothly varying source (load) terms could lead to discontinuous propagating solutions (fronts). For the first order hyperbolic PDEs, the concept of central high resolution schemes is integrated with the multiresolution-based adaptation to capture properly both discontinuous propagating fronts and effects of fine-scale responses on those of larger scales in the multiscale manner. This integration leads to using central high resolution schemes on non-uniform grids; however, such simulation is unstable, as the central schemes are originally developed to work properly on uniform cells/grids. Hence, the main concern is stable collaboration of central schemes and multiresoltion-based cell adapters. Regarding central schemes, the considered approaches are: 1) Second order central and central-upwind schemes; 2) Third order central schemes; 3) Third and fourth order central weighted non-oscillatory schemes (central-WENO or CWENO); 4) Piece-wise parabolic methods (PPMs) obtained with two different local stencils. For these methods, corresponding (nonlinear) stability conditions are studied and modified, as well. Based on these stability conditions several limiters are modified/developed as follows: 1) Several second-order limiters with total variation diminishing (TVD) feature, 2) Second-order uniformly high order accurate non-oscillatory (UNO) limiters, 3) Two third-order nonlinear scaling limiters, 4) Two new limiters for PPMs. Numerical results show that adaptive solvers lead to cost-effective computations (e.g., in some 1-D problems, number of adapted grid points are less than 200 points during simulations, while in the uniform-grid case, to have the same accuracy, using of 2049 points is essential). Also, in some cases, it is confirmed that fine scale responses have considerable effects on higher scales. In numerical simulation of nonlinear first order hyperbolic systems, the two main concerns are: convergence and uniqueness. The former is important due to developing of the spurious oscillations, the numerical dispersion and the numerical dissipation. Convergence in a numerical solution does not guarantee that it is the physical/real one (the uniqueness feature). Indeed, a nonlinear systems can converge to several numerical results (which mathematically all of them are true). In this work, the convergence and uniqueness are directly studied on non-uniform grids/cells by the concepts of local numerical truncation error and numerical entropy production, respectively. Also, both of these concepts have been used for cell/grid adaptations. So, the performance of these concepts is also compared by the multiresolution-based method. Several 1-D and 2-D numerical examples are examined to confirm the efficiency of the adaptive solver. Examples involve problems with convex and non-convex fluxes. In the latter case, due to developing of complex waves, proper capturing of real answers needs more attention. For this purpose, using of method-adaptation seems to be essential (in parallel to the cell/grid adaptation). This new type of adaptation is also performed in the framework of the multiresolution analysis. Regarding second order hyperbolic PDEs (mechanical waves), the regularization concept is used to cure artificial (numerical) oscillation effects, especially for high-gradient or discontinuous solutions. There, oscillations are removed by the regularization concept acting as a post-processor. Simulations will be performed directly on the second-order form of wave equations. It should be mentioned that it is possible to rewrite second order wave equations as a system of first-order waves, and then simulated the new system by high resolution schemes. However, this approach ends to increasing of variable numbers (especially for 3D problems). The numerical discretization is performed by the compact finite difference (FD) formulation with desire feature; e.g., methods with spectral-like or optimized-error properties. These FD methods are developed to handle high frequency waves (such as waves near earthquake sources). The performance of several regularization approaches is studied (both theoretically and numerically); at last, a proper regularization approach controlling the Gibbs phenomenon is recommended. At the end, some numerical results are provided to confirm efficiency of numerical solvers enhanced by the regularization concept. In this part, shock-like responses due to local and abrupt changing of physical properties, and also stress wave propagation in stochastic-like domains are studied. KW - Partielle Differentialgleichung KW - Adaptives System KW - Wavelet KW - Tichonov-Regularisierung KW - Hyperbolic PDEs KW - Adaptive central high resolution schemes KW - Wavelet based adaptation KW - Tikhonov regularization Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220922-47178 ER - TY - THES A1 - Wündsch, Charlene T1 - Entrepreneurial Branding: Eine praxistheoretische Analyse markenbildender Strategiepraktiken bei Startups N2 - Gründungsunternehmen stehen vor der Herausforderung, eine unternehmerische Leistung zu entwickeln und gleichzeitig eine Markenidentität aufzubauen. Dabei sind sie mit finanziellen, personellen und strukturellen Besonderheiten konfrontiert, aber auch mit Unbekanntheit und Kundenunsicherheit. Die Dissertation zielt darauf ab, durch die Analyse markenbildender Strategiepraktiken einen Beitrag zur wissenschaftlichen Auseinandersetzung mit der Markenbildung bei Gründungsunternehmen zu leisten und praktische Implikationen für angehende Gründer:innen sowie akademische Startup-Inkubatoren abzuleiten. Der Fokus liegt dabei auf Gründungsvorhaben und Startups in der Vorgründungs- oder frühen Gründungsphase aus dem Hochschulumfeld. Zur Analyse markenbildender Strategiepraktiken wird der Strategy-as-Practice Ansatz (SAP) angewendet. Die qualitative Forschungsmethodik wird genutzt, um Handlungsmuster bestimmter Akteursgruppen in diesem spezifischen Kontext zu rekonstruieren. Beobachtungen, Interviews und Dokumente im Feld dienen als Grundlage für die Forschung. Die Ergebnisse dieser Arbeit liefern umfassende Einblicke in die markenbildende Praxis bei Gründungsunternehmen. Auf Basis dieser Erkenntnisse wurde ein Modell entwickelt, das Komponenten beschreibt, die zusammen einen Handlungsrahmen für die Markenbildung in emergenten Strategiekontexten wie der Unternehmensgründung bilden. Dieses Modell bietet die Möglichkeit, sich vor dem Hintergrund der gründungsspezifischen Rahmenbedingungen mit der Markenentwicklung in der frühen Gründungsphase auseinanderzusetzen und sie systematisch in das Gründungsvorhaben zu implementieren. KW - Entrepreneurship KW - Marke Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231016-64680 ER - TY - THES A1 - Wuttke, Frank T1 - Beitrag zur Standortidentifizierung mit Oberflächenwellen T1 - Site identification using surface waves N2 - In der Dissertation wurden unterschiedliche Methoden zur Standortidentifizierung mit Oberflächenwellen analysiert. Es wurden neue Methoden zur Parameteridentifikation unter Nutzung von Oberflächenwellen vorgeschlagen. Die Ziele der Arbeit können wie folgt definiert werden: a) Die Entwicklung eines geeigneten theoretischen Modells als Grundlage zur Untersuchung des Standortes hinsichtlich vorhandener Bodensteifigkeiten. b) Die Entwicklung einer neuen Inversionsmethodik unter Berücksichtigung aller auftretenden Moden im Oberflächenwellenfeld. Die Erstellung eines Modells des vertikal heterogenen Untergrundes erfolgte im Frequenz-bereichs für beliebig geschichtete Böden, aufbereitet durch weitestgehend analytische Formulierungen. Durch Nutzung beliebiger horizontaler, elastisch-isotroper Schichten konnte die vertikale Heterogenität approximiert werden. Die Definition der Green'schen Funktionen wurde in Form der Reflexions- und Transmissionskoeffizienten durchgeführt. Die Lösung des formulierten Halbraumproblems erfolgte unter Verwendung der Konturintegration. Dazu wurde die Vorgehensweise der bestehenden Lösung des homogenen Halbraums auf das Problem des geschichteten Mediums übertragen. Die daraus sich ergebende Lösung ist in ein Körperwellen- und ein Oberflächenwellenfeld separiert. Der Vorteil dieser analytischen Betrachtungsweise liegt in der eindeutigen Zuordnungsmöglichkeit der erhaltenen Lösungen zu Wellentypen und in der klaren Dispersionscharakteristik der berechneten Modelle. Im Gegensatz dazu liefern numerische Lösungen, wie FEM, immer ein Wellenfeld, in dem die Wellentypen zugeordnet bzw. interpretiert werden müssen. Mit Hilfe der synthetischen Bodenmodellierung wird das Verhalten von geschichteten Böden bei durchlaufenden Oberflächenwellenfeldern simuliert und untersucht. Für die Untersuchung der Profile wurde hauptsächlich die Modale Superposition von Oberflächenwellen und die Wellenzahl-Integration verwendet. Bei der Analyse von Oberflächenwellenfeldern in vorhandenen Medien sind abweichend von den üblichen seismischen Methoden spezielle Untersuchungsmethoden zur Ermittlung der vorhandenen Dispersion notwendig. Zur Durchführung der Dispersionsanalyse wird in geotechnischen Untersuchungen in der Regel das Phasen-Differenzen-Verfahren (SASW) genutzt. Aufgrund der beschränkten Aussagefähigkeit dieses Verfahrens zu auftretenden höheren Moden werden verbesserte Analysemethoden zur experimentellen Auswertung hinzugezogen. Diese Methoden nutzen zur Informationsgewinnung das räumlich ausgedehnte Wellenfeld. Ausgehend von dem Dispersionsverhalten kann die Bodenstruktur mittels inverser Methoden bestimmt werden. Für die gemeinsame Inversion der in den Messungen vorhandenen Moden wurde ein entsprechendes Inversionsverfahren abgeleitet. Als Grundlage der Inversion wurde ein Verfahren des kleinsten Fehlerquadrates gewählt. Der Vorteil hinsichtlich einer effizienten und stabilen Inversion unter Nutzung dieser Methodik überwiegt den Nachteil der lokalen Suche nach dem Fehlerminimum. Zum Erreichen der stabilen und zielgerichteten Inversion wird der Levenberg-Marquardt Algorithmus, zusammen mit der Wichtung der Dispersionsäste entsprechend ihres Anregungsverhaltens in den Dispersionsspektren, eingesetzt. Von Vorteil hat sich innerhalb der Arbeit die gleichzeitige Behandlung von theoretischen und experimentellen Parameterstudien erwiesen, da sich Ergebnisse und Erkenntnisse beider Seiten ergänzten. Eine Interpretation von Felddaten kann damit weitaus sicherer durchgeführt werden. Zusätzlich konnten die erarbeiteten experimentellen und theoretischen Verfahren gegenseitig überprüft werden. N2 - In this thesis various available methods for the site identification with surface waves were analyzed. Some new methods are proposed for the site identification using surface wave characteristics. The objectives of the thesis are as follows: a) To develop an appropriate theoretical model that can work in conjunction with the results obtained from the site inverstigations to precisely identify the actual in situ stiffness profiles. b) To develop a new inversion procedure that enables to inverse all the appearing modes in a wave field. An appropriate model should be able to define the vertical heterogeniety of the subsoil. In this study, the existing solution for the homogeneous half space was extended to the stratified medium. An analytical formulation in the frequency domain was used for this purpose by considering arbitrary horizontal, elastic isotropic layers. The Green’s functions were defined in the matrix formulation in the form of reflection- and transmission coefficients. In this way the analytical considerations could be carried out in a strong mathematical procedure. The solution for the forced excited layered half space was obtained following the contour integration. The solution could be separated in to the body wave and the surface wave fields. The advantage of such an analytical approach lies in the definite allocation of the preserved solutions for wave types and the straight dispersion characteristic of the calculated models. The difference between the analytical and the numerical solutions, such as using FEM, is that the interpretation of the calculated wave field is not required in the former, whereas it is necessary in the latter case. With the help of an analytic wave field calculation the behavior of the propagate surface wave fields in the stratified media could be better simulated and examined. For the investigation of the stiffness profiles primarily the modal superposition by surface waves and the wave number-integration were used. Special surface wave field investigation methods were necessary for the determination of the available dispersion characterisic. For the realization of the dispersion analysis in geoengineering investigations the phase difference method (SASW) is a widely used tool. Since the information on the higher modes are limited, an improved method is proposed to separate the different modes from the experimental data. The proposed method used the spatially spread wave field for the dispersion information. The soil structure can be determined by using various inverse methods. For the joint inversion of all the available modes in the measurements, a suitable inversion procedure was derived. For the stabilization of the inversion procedure, a least square method was chosen. The disadvantage of this efficient method is a local minimum search of the objective function. To achieve a stable and focused inversion procedure the Levenberg-Marquardt algorithm was used. The different dispersion branches multiplied by weighting factors corresponds to the excitation behavior in the dispersion spectra. One particularly advantage in the work is the concurrent treatment of theoretical and experimental parameter studies. According this treatment, the results and cognitions of both sides were complementary. An interpretation of field data could be carried out reliably. In addition, the compiled experimental and theoretical procedures could be checked mutually. KW - Inversionsalgorithmus KW - Inversionstheorie KW - Wellenausbreitung KW - Anomale Dispersion KW - Dispersion KW - Energieübertragung KW - wave propagation KW - inversion procedure KW - inversion theorie KW - wave field dispersion Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050708-6874 ER - TY - THES A1 - Wolkowicz, Christian T1 - Ein Beitrag zur Evolution des Tensegrity-Konzeptes - Zur Erhöhung der Steifigkeit von Seil-Stab-Systemen T1 - A contribution to the evolution of the Tensegriy-concept - About the increase of the stiffness of cable-strut-systems N2 - In der vorliegenden Arbeit werden auf Basis des Tensegrity-Konzeptes Strukturen entwickelt und vorgestellt, welche durch einen signifikanten Steifigkeitszuwachs in der Lage sind, die Anforderungen an die Gebrauchstauglichkeit von Tragwerken zu erfüllen. Selbstverankerte Strukturen mit aufgelösten Druckstäben werden als Seil-Stab-Systeme bezeichnet und sind alleiniger Gegenstand aller angestellten Betrachtungen. Tensegrity-Strukturen sollen eine Untergruppe der Seil-Stab-Systeme darstellen, deren symptomatische Eigenschaft eine sich im Tensegrity-Zustand befindliche Geometrie ist. Einer Definition des Tensegrity-Zustandes folgt ein Überblick über die zur Untersuchung von Seil-Stab-Systemen notwendigen Berechnungsalgorithmen. Der Kern der Arbeit beschäftigt sich zunächst mit dem Einfluss der Geometrie auf die Empfindlichkeit von Seil-Stab-Systemen gegenüber unvermeidlichen Herstellungstoleranzen sowie dem Einfluss von Topologie, Vorspannung, lokaler Steifigkeit der Elemente und Geometrie auf die Steifigkeit dieser Systeme. Darauf aufbauend wird eine Möglichkeit gezeigt, die Steifigkeit von beweglichen Seil- Stab-Systemen merklich zu erhöhen, ohne die Strukturen durch zusätzliche Elemente oder Verbindungen optisch zu verändern. Der zu erzielende Steifigkeitszuwachs wird mittels Vergleichrechnungen und durchgeführten Belastungsversuchen verifiziert. N2 - In the here presented document structures, based on the Tensegrity concept, are developed and introduced which are able to fulfil the demands towards the service state of a load bearing structure due to a significant increase of its stiffness. Self anchored structures with dissolved compression struts are named cable-strut-systems and are the exclusive topic of considerations carried out. Tensegrity structures shall be a sub division of the cable strut systems with a geometry in the Tensegrity state as the determining characteristic. After a definition of the Tensegrity state an overview about the calculation algorithms necessary for the examination of cable-strut-systems is given. The main part initially deals with the influence of geometry on the sensitivity of cable-strut systems against unavoidable manufacturing tolerances as well as with the influence of topology, pre-stress, local stiffness of the elements and the geometry on the stiffness of those systems. Based on these considerations an opportunity to increase the stiffness of kinematic cable-strut systems significantly without changing the visual effects by adding elements is presented. Comparative calculations and mock-up tests were used to verify the achievable increase of the stiffness. T3 - Konstruktion und Gestalt - 2008/01 KW - Tensegrity KW - Steifigkeit KW - Vorspannung KW - Seiltragwerk KW - Fuller, Richard Buckminster KW - Tensegrity KW - cable-strut-systems KW - pre-stress KW - mechanism KW - stiffness Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20090417-14659 ER - TY - THES A1 - Wolff, Thomas T1 - Ein methodischer Bemessungsansatz zur Abschätzung des Tragverhaltens von Pfahlgründungen in weichem kalkigen Sedimentgestein T1 - A Methodical Design Approach to estimate the Laod Bearing Capacity of Pile Foundations in soft calcareous Sedimentary Rock N2 - In der vorliegenden Arbeit wird das Tragverhalten und das Sicherheitsniveau axial belasteter Großbohrpfähle in den pleistozänen Kalkarenit der Küstenregion von Dubai untersucht. Zunächst wird auf der Grundlage von Ergebnissen umfangreicher Baugrundanalysen und Probebelastungen das Tragverhalten detailliert beschrieben. Anschließend wird ein auf der Finiten-Elemente-Methode basierendes Strukturmodell zur Simulation des Last-Setzungsverhaltens von Großbohrpfählen im Sinne eines numerischen Versuchsstandes entwickelt. Um herstellungsbedingte Veränderungen der Baugrundeigenschaften in der Kontaktzone Pfahl-Baugrund zu berücksichtigen, die mit boden- und felsmechanischen Elementversuchen gewöhnlich nicht erfassbar sind, werden die Größen der relevanten konstitutiven Parameterwerte iterativ mittels inverser Optimierungsstrategien bestimmt. Abschließend wird eine methodische Vorgehensweise aufgezeigt, wie das Sicherheitsniveau axial belasteter Großbohrpfählen unter Berücksichtigung der räumlichen Variabilität der Baugrundeigenschaften zuverlässig abgeschätzt werden kann. N2 - The main focus of this dissertation is, how the Estimation of the Load-Settlement behaviour of axial loaded Pile foundation can be improved when the constitutive parametervalues are invers indentified by Optimisation strategies. Following it is shown how the reliability of pile foundations can be estimated on the basis of the identified parametervalues and the lod test results. T3 - Schriftenreihe Geotechnik - 22 KW - Pfahl KW - Pfahlgründung KW - Bemessung KW - Partikel-Schwarm-Optimierung KW - Optimierung KW - Zuverlässigkeit KW - Faseroptischer Sensor KW - Sediment KW - Parameteridentif KW - Autokorrelationslänge KW - Pfahlprobebelastung KW - Pile Foundation KW - Pile Load Test KW - Reliability KW - fiber optical Sensor KW - Paramter Identification Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100125-14993 ER -