TY - JOUR A1 - Zhak, S. V. A1 - Sidorenko, V. S. T1 - Optimized Models of Modes Choice for Displacement of technical Systems Objects N2 - The effectiveness of working processes accomplished by various technological machines to a large extend depends on working quality of supply, transporting and orientating mechanisms which are very often produced as positional hydro-mechanical systems. The choice of their best type and regimes of work requires construction and analysis of models of their optimum steering which are complicated by nonlinearness, multy-criterialness of problem and also by occasional outbreaks of parameters and moments of steering regime changing. It was developed the common structure of such systems allowing within common scheme to vary the complexity degree of PHMS and the methods of inhibitory efforts supplement. For some systems which are complicated in series (from two-measured linear system to nine-measured non-linear) puzzles of the most fast zero-ambit getting are solved and two-criterial problems are analyzed. (T-min-speed, Z(T)- accuracy). There are suggested the computing procedures of optimum PHMS synthesis. The effectiveness of accepted methods of solving is asserted by the analogy of the results of gradually complicated models investigation and by their good analogy with the natural experiment. It was exposed the sense of heuristic methods of improving of approximately optimum steering, their elaboration on the base of theoretical models. The basic methods of optimum PGMS construction were also nominated. KW - Modellierung KW - Optimierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5347 ER - TY - THES A1 - Wolff, Thomas T1 - Ein methodischer Bemessungsansatz zur Abschätzung des Tragverhaltens von Pfahlgründungen in weichem kalkigen Sedimentgestein T1 - A Methodical Design Approach to estimate the Laod Bearing Capacity of Pile Foundations in soft calcareous Sedimentary Rock N2 - In der vorliegenden Arbeit wird das Tragverhalten und das Sicherheitsniveau axial belasteter Großbohrpfähle in den pleistozänen Kalkarenit der Küstenregion von Dubai untersucht. Zunächst wird auf der Grundlage von Ergebnissen umfangreicher Baugrundanalysen und Probebelastungen das Tragverhalten detailliert beschrieben. Anschließend wird ein auf der Finiten-Elemente-Methode basierendes Strukturmodell zur Simulation des Last-Setzungsverhaltens von Großbohrpfählen im Sinne eines numerischen Versuchsstandes entwickelt. Um herstellungsbedingte Veränderungen der Baugrundeigenschaften in der Kontaktzone Pfahl-Baugrund zu berücksichtigen, die mit boden- und felsmechanischen Elementversuchen gewöhnlich nicht erfassbar sind, werden die Größen der relevanten konstitutiven Parameterwerte iterativ mittels inverser Optimierungsstrategien bestimmt. Abschließend wird eine methodische Vorgehensweise aufgezeigt, wie das Sicherheitsniveau axial belasteter Großbohrpfählen unter Berücksichtigung der räumlichen Variabilität der Baugrundeigenschaften zuverlässig abgeschätzt werden kann. N2 - The main focus of this dissertation is, how the Estimation of the Load-Settlement behaviour of axial loaded Pile foundation can be improved when the constitutive parametervalues are invers indentified by Optimisation strategies. Following it is shown how the reliability of pile foundations can be estimated on the basis of the identified parametervalues and the lod test results. T3 - Schriftenreihe Geotechnik - 22 KW - Pfahl KW - Pfahlgründung KW - Bemessung KW - Partikel-Schwarm-Optimierung KW - Optimierung KW - Zuverlässigkeit KW - Faseroptischer Sensor KW - Sediment KW - Parameteridentif KW - Autokorrelationslänge KW - Pfahlprobebelastung KW - Pile Foundation KW - Pile Load Test KW - Reliability KW - fiber optical Sensor KW - Paramter Identification Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100125-14993 ER - TY - THES A1 - Weitzmann, Rüdiger T1 - Theory and application of optimization strategies for the design of seismically excited structures N2 - The study introduces into the theory and application of optimization strategies in earthquake engineering. The optimization algorithm substitutes the intuitive solution of practical problems done by the engineer in daily practice, providing automatic design tools and numerical means for further exploration of the design space for various extremum states. This requires a mathematical formulation of the design task, that is provided for typical seismic evaluations within this document. Utilizing the natural relation between design and optimization tasks, appropriate mechanical concepts are developed and discussed. The explanations start with an overview on the mechanical background for continua. Hereby the focus is placed on elasto-plastic structures. The given extremum formulations are treated with help of discretization methods in order to obtain optimization problems. These basics are utilized for derivation of programs for eigenvalue and stability analysis, that are applied in simplified linear analysis for the design of seismically excited structures. Another focus is set on the application in simplified nonlinear design, that uses limit state analyses on the basis of nonlinear problem formulations. Well known concepts as the response and pushover analysis are covered as well as alternative strategies on the basis of shakedown theory or cycle and deformation based evaluations. Furthermore, the study gives insight into the application of optimization problems in conjunction with nonlinear time history analyses. The solution of step-by-step procedures within optimization algorithms is shown and aspects of dynamic limit state analyses are discussed. For illustration of the great variety of optimization-based concepts in earthquake engineering, several specialized applications are presented, e.g. the generation of artificial ground motions and the determination of reduction coefficients for design spectrum reduction due to viscous and hysteretic damping. As well alternative strategies for the design of base isolated structures with controlled impact are presented. All presented applications are illustrated with help of various examples. N2 - Die vorliegende Arbeit führt in die Theorie und Anwendung von Optimiierungsverfahren im Erdbebeningenieurwesen ein. Die vorgestellten Optimierungsalgorithmen ersetzen die typische intuitive Lösung von praktischen Bemessungsaufgaben, mit Bereitstellung von automatischen Methoden und numerischen Mitteln für die Bewertung des Designraumes bezüglich extremer Zustände. Dies erfordert eine geeignete mathematische Formulierung der Bemessungsaufgaben, die für typische Anwendungsfälle bereitgestellt werden. Ausgehend von der engen Beziehung von Bemessungs- und Optimierungsaufgaben werden wesentliche theoretische Grundlagen für die Ableitung praxistauglicher Analysekonzepte entwickelt und diskutiert. Die Darstellung beginnt mit einem Überblick zum mechanischen Hintergrund. Der Schwerpunkt wird dabei auf die Analyse von elastisch-plastischen Tragwerken gelegt. Die vorgestellten Extremalformulierungen werden mit Methoden der Diskretisierung in Optimierungsprobleme umgeformt. Diese bilden die Grundlage für die Analyse von Eigenwert- und Stabilitätsproblemen im Erdbebeningenierwesen. Weiterhin werden vereinfachte lineare Bemessungsmethoden besprochen. Eine Erweiterung wird duch die Einbeziehung von nichlinearen Aspekten erzielt, die einen wesentlichen Teil der Arbeit ausmachen. Einerseits werden bekannte Konzepte auf der Basis von Antwortspektren und Pushoveranalysen einbezogen, andererseits werden auch alternative Strategien auf der Basis der Einspieltheorie oder zyklen- oder deformationsbasierten Analyse vorgestellt. Desweiteren werden Anwendungen von Optimierungsverfahren im Zusammenhang mit nichtlinearen Zeitverlaufsmethoden diskutiert. Die Lösung von Zeitverlaufsproblemen in Form von Optimierungsaufgaben wird vorgestellt und Aspekte der Grenzzustandsanalyse für dynamische Probleme behandelt. Die Vielfältigkeit von Optimierungsanwendungen im Erdbebeningenieurwesen wird anhand verschiedener Spezialanwendungen demonstriert wie z.B. die Generierung von künstlichen Erdbebenzeitverläufen und die Modifikation von Bemessungsspektren für die Analyse von nichtlinear beanspruchten Tragwerken mit viskoser und hysteretischer Dämpfung. Darüberhinaus wird eine alternative Methode für die Bemessung von basisisolierten Tragwerken unter Verwendung von kontrollierten Kollisionen vorgestellt. Alle Anwendungen werden in zahlreichen Beispielen näher erläutert. T2 - Theorie und Anwendung von Optimierungsstrategien für die Bemessung von seismisch beanspruchten Tragwerken T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 19 KW - Dynamik KW - Erdbeben KW - Bemessung KW - Optimierung KW - Dynamics KW - Earthquake KW - Design KW - Optimization Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20091030-14917 ER - TY - CHAP A1 - Weitzmann, Rüdiger T1 - Limit state design of hybrid structures with meshless methods using mathematical optimization N2 - The revitalization of existing structures belongs to the frequently tasks in urban reconstruction processes. The adaptation for new requirements will commonly affect substantial changes in the general configuration of structures. The resulting revitalized structures are characterized by a hybrid design, where old and new, identical or diverse materials and members will be coupled in different ways. In the planning stage the treatment of these systems leads to application of complex and hybrid mechanical models respectively. High performance numerical instruments have to be applied for solving not only analysis but also targeted design problems. Because of the hybrid character of mechanical models in revitalization planning processes the use of hybrid technologies is advantageous. In this paper mixed domain technique will be used for connecting EFG and FE. The models derived will be adopted for design purposes of non-linear loaded hybrid structures. The investigations show a good adaptability of the meshless methods to the design of hybrid structures by using optimization strategies. With this method the advantages of both finite element and meshless methods can be utilized most suitable. With the property of a minimum amount of unknowns by maintaining an adequate quality of the results the application of mixed finite element and meshless methods is a promising alternative to traditional methods in structural analysis and optimization. KW - Gebäude KW - Rekonstruktion KW - Baustatik KW - Nichtlinearität KW - Optimierung KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-67 ER - TY - THES A1 - Weitze, Laura Katharina T1 - Erweiterte Prozessbewertung von Biogasanlagen unter Berücksichtigung organoleptischer Parameter und Erfahrungswissen N2 - Landwirtschaftliche Biogasanlagen leisten mit ca. 9.300 Anlagen und einem Anteil von 5,3% an der Stromerzeugung, einen Beitrag zur Erzeugung Erneuer-barer Energien in Deutschland. Die Optimierung dieser Anlagen fördert die nachhaltige Bereitstellung von Strom, Wärme und BioErdgas. Das Ergebnis dieser Forschungsarbeit ist die Entwicklung eines mehrmethodi-schen Bewertungsansatzes zur Beschreibung der Qualität der Eingangs-substrate als Teil einer ganzheitlichen Prozessoptimierung. Dies gelingt durch die kombinierte Nutzung klassischer Analysesätze, der Nutzung organolepti-scher Parameter – der humansensorischen Sinnenprüfung – und der Integration von prozess- und substratspezifischem Erfahrungswissen. Anhand von halbtechnischen Versuchen werden Korrelationen und Kausalitäten zwi-schen chemisch-physikalischen, biologischen, organoleptischen und erfahrungsbezogenen Parametern erforscht. Die Entwicklung einer Fallbasis mit Hilfe des Fallbasierten Schließens, einer Form Künstlicher Intelligenz, zeigt das Entwicklungs- und Integrationspotenzial der Automatisierung auf, insbesondere auch im Hinblick auf neue Ansätze z.B. Industrie 4.0. Erste Lösungen zur Bewältigung der identifizierten Herausforderungen der mehrmethodischen Prozessbewertung werden vorgestellt. Abschließend wird ein Ausblick auf den weiteren Forschungsbedarf gegeben und die Übertragbarkeit des mehrmethodischen Bewertungsansatzes auf andere Anwendungsfelder z.B. Bioabfallbehandlung, Kläranlagen angeregt. N2 - Agricultural biogas plants significantly contribute to the generation of renewable energies in Germany. Approx. 9,300 facilities account 5.3% of the total generated electricity in Germany. Optimization of these biogas plants will undoubtably promote the sustainable provision of electricity, heat and natural gas. This research study developed a multi-methodical assessment approach to de-scribe the quality of input substrates as part of a holistic process optimization. This is achieved by combination of conventional analysis, use of organoleptic parameters, integration of process- as well as substrate-specific experient ba-sed knowledge. Correlations and causalities between chemical-physical, biological, organoleptic and experiential parameters are explored. These inves-tigations based on semi-technical experiments. Using case-based reasoning, a form of artificial intelligence, demonstrates the potential for development and integration of automation. Solving approaches to overcome the challenges of multi-methodical process assessment are presented. Finally, an outlook on further research needs is given. Furthermore, the trans-ferability of the multi-methodical assessment approach to other fields of application like bio-waste treatment or sewage treatment plants, is incited. KW - Biogasanlage KW - Erfahrungswissen KW - Maissilage KW - Optimierung KW - Biogas KW - Organoleptik Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190129-38499 ER - TY - JOUR A1 - Takagi, Kousuke A1 - Tani, Akinori A1 - Kawamura, Hiroshi T1 - Research on Intelligent Fuzzy Optimal Active and Hybrid Control Systems of Building Structures - Verification of Optimization Method on Switching Rules of Control Forces N2 - Recently, many reseraches on active control systems of building structures are preformed based on modern control theory and are installed real buildings. The authors have already proposed intelligent fuzzy optimal active control (IFOAC) systems. IFOAC systems imitate intelligent activities of human brains such as prediction, adaptation, decision-kaking and so on. In IFOAC systems, objective and subjective judgements on the active control can be taken into account. However, IFOAC systems are considered to be suitable for far-field erathquake and control effect becomes small in case of near-field earthqaukes which include a few velosity pules with large amplitudes. To improve control effect in case of near-souece earthquakes, the authors have also proposed hybrid control (HC) systems, in which IFOAC systems and fuzzy control system are combined. In HC systems, the fuzzy control systems are introduced as a reflective fuzzy active control (RFAC) system and imitates spinal reflection of human. In HC systems, active control forces are activated to buildings in accordance with switching rules on active control forces. In this paper, optimizations on fuzzy control rules in RFAC system and switching rules of active control forces in HC system are performed by Parameter-Free Genetic Algorithms (PfGAs). Here, the optimization is performed by using different earthquake inputs. The results of digital simulations show that the HC system can reduce maximal response displacements under restrictions on strokes of the actuator effectively in case of a near-source earthquake and the effectiveness of the proposed HC system is discussed and clarified. KW - Mehragentensystem KW - Lernendes System KW - Fuzzy-Logik KW - Optimierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2238 ER - TY - THES A1 - Stahr, Alexander T1 - Das wohltemperierte Netz - Zum Konstruktiven Entwurf direkt verglaster Stabnetze auf Freiformflächen T1 - The well-tempered Grid - To the Constructive Design of freeformed, direct glazed Grids N2 - Direkt verglaste Stabnetze repräsentieren ein strukturell und geometrisch hochgradig variables Prinzip zur Realisierung transparenter architektonischer Freiformflächen. Dieses beinhaltet die funktionale Entkopplung der Fassadenkonstruktion in ein tragendes Stabnetz und eine hüllende Verglasung. Ein formal universales, dimensional variables Knotenelement bildet dabei das Herzstück der Konstruktion. Die vorliegende Arbeit widmet sich dem Konstruktiven Entwurf frei geformter, direkt verglaster Stabnetze. Dieser umfasst schwerpunktmäßig die formale und dimensionale Konzeptionierung der Knotenelemente. Er wird maßgeblich beeinflusst von der Dimensionalitätsdifferenz zwischen dem formbeschreibenden Flächennetz aus nulldimensionalen Knoten und eindimensionalen Kanten sowie dem Stabnetz aus dreidimensionalen Knoten bzw. Stäben. Darüber hinaus definieren das freiformbedingte Erfordernis einer unikaten Ausrichtung der Stabnetzelemente sowie die materialspezifische Anforderung einer zwängungsfreien Lagerung der Gläser weitere dominante Einflussgrößen im Entwurfsprozess. In der Arbeit werden zunächst die geometrischen und konstruktiven Randbedingungen des Konstruktiven Stabnetzentwurfs dargestellt. Darauf aufbauend wird ein Zylinder-Achsen- Modell entwickelt, welches die unikate lokale Situation am Knoten unter Berücksichtigung einer variablen Ausrichtung der Stabnetzelemente sowie beliebig polygonaler Stabquerschnitte abstrahiert. Die Modellierung ermöglicht eine Bewertung des knotenbezogenen Status unter konstruktiven und mechanischen Aspekten. Sie bildet somit die Grundlage für eine Konstruktive Optimierung direkt verglaster Stabnetze. Mit Hilfe des Zylinder-Achsen-Modells werden alle bisher bekannten Prinzipien zur Ausrichtung der Stabnetzelemente analysiert. Dabei offenbaren sich verschiedene Defizite. Zu deren Überwindung werden drei neuartige Lösungsansätze entwickelt. Eine alternative Methode dient folglich zur Bestimmung einer konstruktiv optimierten Ausrichtung der Knotenachse. Ein zweiter Ansatz zielt auf die Definition einer neuartigen Stablängsbezugsachse, welche unabhängig von der Flächenkrümmung eine zwängungsfreie Lagerung der Glaselemente gewährleistet. Schließlich ermöglicht das dritte innovative Prinzip die konsistente Bestimmung einer Stabquerachse auch bei nicht ebenen Viereckmaschen. N2 - Direct glazed lattice grids represent a structural and geometrical highly variable constructive approach for the realisation of transparent architectural freeforms. This principle is characterised by a functional decoupling of the cladding construction into a loadbearing grid of members and nodes on the one hand and covering glass panels on the other. A formal universal but dimensionally variable node builds the core of the construction. This work addresses the constructive design of freeformed, direct glazed grids. This primarily implies the formal and dimensional design of the nodal elements. The design is significantly inuenced by the difference of mesh dimensions, which describe the freeform and consist of zero-dimensional vertices and one-dimensional edges, as well as by the structural grid, made up of three-dimensional members and nodes. Moreover the free form determines a need for individual adjustment of all structural elements. Furthermore material-specific demands regarding restrained-free bearing of the glass panels define further dominant parameters in the design process. First of all geometrical and constructive edge conditions of the constructive grid design were described in this work. Based on this a cylinder-axle-model was developed. This model abstracts individual local situations at the nodes including variable adjustment of the structural grid elements as well as variable cross-section of the members. The model allows evaluation of the nodal status in relation to constructive and mechanical aspects. It provides a basis for constructive optimisation of direct glazed structural grids. With the aid of this model state-of-the-art approaches for the adjustment of structural elements relative to the form describing surface mesh were analysed. Several shortcomings were observed which can be solved through three new approaches developed within this work. The first approach describes an alternative method for the determination of a constructively optimised orientation of the nodal axis. The second one describes a method for a restrained-free bearing of the glass panels independent of their local curvature through definition of a new longitudinal member-axis. The last approach defines a new methodology for the determination of an axis crosswise the edge of the mesh even for non planar quadrilateral meshes. KW - Entwurf KW - Konstruktion KW - Glas KW - Optimierung KW - Konstrutkiver Entwurf KW - Parametrischer Entwurf KW - Stabnetz KW - Knoten KW - Freiform KW - Zylinder-Achsen-Modell KW - Konstruktive Optimierung KW - Constructive Design KW - Parametric Design KW - Freeform KW - Lattice Grids KW - Glass KW - Cylinder-Axle-Model KW - Constructive Optimisation Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20090427-14602 N1 - Die gedruckte Ausgabe ist im Universitätsverlag der Bauhaus-Universität Weimar erschienen, seit 2014 Bauhaus-Universitätsverlag Weimar. ER - TY - THES A1 - Schilling, Steffi T1 - Beitrag zur Lösung ingenieurtechnischer Entwurfsaufgaben unter Verwendung Evolutionärer Algorithmen T1 - Contribution to solving engineering design tasks using evolutionary algorithms N2 - In der vorliegenden Arbeit erfolgt die Anwendung Evolutionärer Algorithmen an baupraktischen Problemen. Der Einfluss unterschiedlicher Selektionsmethoden, Rekombinationsmethoden sowie der Einfluss von Mutation und Populationsgröße auf Sucheffizienz und Ergebnis werden erörtert. Die erzielten Erkenntnisse fliessen in die Definition Evolutionärer Strategiewerte ein, die als Grundlage für die Formulierung eines robusten Evolutionären Algorithmus dienen. Evolutionäre Algorithmen werden mit einem wachstumsorientierten Algorithmus erweitert (hybride Evolutionäre Algorithmen), um eine Steigerung der Effizienz bei der Lösungssuche zu erzielen. An ausgewählten Stahlkonstruktionen - Hallen, Wassertank, Dachkonstruktion - wird die Leistungsfähigkeit von robusten Evolutonären Algorithmen und den entwickelten hybriden Evolutionären Algorithmus überprüft. N2 - In the dissertation the application of evolutionary algorithms on practical construction problems is discussed. Here, the results of different methods of selection and recombination as well as mutation and population size are compared with the aim to show how they influence the efficiency and results. The insight gained are used for the definition of evolutionary strategy parameters, which form the basis of a robust evolutionary algorithm. In order to increase the efficiency of the search for solutions, evolutionary algorithms are extended with a growth oriented algorithm (hybrid evolutionary algorithm). At selected steel structures - halls, water tank, roof structure - the efficiency by the robust evolutionary algorithms and the developed hybrid evolutionary algorithms is examined. KW - Optimierung KW - Evolutionäre Algorithmen KW - Stahlkonstruktionen KW - CAO KW - Entwurf KW - optimization KW - evolutionary algorithms KW - steel structures KW - computer aides optimization KW - design Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040826-921 ER - TY - THES A1 - Schemmann, Christoph T1 - Optimierung von radialen Verdichterlaufrädern unter Berücksichtigung empirischer und analytischer Vorinformationen mittels eines mehrstufigen Sampling Verfahrens T1 - Optimization of Centrifugal Compressor Impellers by a Multi-fidelity Sampling Method Taking Analytical and Empirical Information into Account N2 - Turbomachinery plays an important role in many cases of energy generation or conversion. Therefore, turbomachinery is a promising approaching point for optimization in order to increase the efficiency of energy use. In recent years, the use of automated optimization strategies in combination with numerical simulation has become increasingly popular in many fields of engineering. The complex interactions between fluid and solid mechanics encountered in turbomachines on the one hand and the high computational expense needed to calculate the performance on the other hand, have, however, prevented a widespread use of these techniques in this field of engineering. The objective of this work was the development of a strategy for efficient metamodel based optimization of centrifugal compressor impellers. In this context, the main focus is the reduction of the required numerical expense. The central idea followed in this research was the incorporation of preliminary information acquired from low-fidelity computation methods and empirical correlations into the sampling process to identify promising regions of the parameter space. This information was then used to concentrate the numerically expensive high-fidelity computations of the fluid dynamic and structure mechanic performance of the impeller in these regions while still maintaining a good coverage of the whole parameter space. The development of the optimization strategy can be divided into three main tasks. Firstly, the available preliminary information had to be researched and rated. This research identified loss models based on one dimensional flow physics and empirical correlations as the best suited method to predict the aerodynamic performance. The loss models were calibrated using available performance data to obtain a high prediction quality. As no sufficiently exact models for the prediction of the mechanical loading of the impellercould be identified, a metamodel based on finite element computations was chosen for this estimation. The second task was the development of a sampling method which concentrates samples in regions of the parameter space where high quality designs are predicted by the preliminary information while maintaining a good overall coverage. As available methods like rejection sampling or Markov-chain Monte-Carlo methods did not meet the requirements in terms of sample distribution and input correlation, a new multi-fidelity sampling method called “Filtered Sampling“has been developed. The last task was the development of an automated computational workflow. This workflow encompasses geometry parametrization, geometry generation, grid generation and computation of the aerodynamic performance and the structure mechanic loading. Special emphasis was put into the development of a geometry parametrization strategy based on fluid mechanic considerations to prevent the generation of physically inexpedient designs. Finally, the optimization strategy, which utilizes the previously developed tools, was successfully employed to carry out three optimization tasks. The efficiency of the method was proven by the first and second testcase where an existing compressor design was optimized by the presented method. The results were comparable to optimizations which did not take preliminary information into account, while the required computational expense cloud be halved. In the third testcase, the method was applied to generate a new impeller design. In contrast to the previous examples, this optimization featuredlargervariationsoftheimpellerdesigns. Therefore, theapplicability of the method to parameter spaces with significantly varying designs could be proven, too. N2 - Turbomaschinen sind eine entscheidende Komponente in vielen Energiewandlungs- oder Energieerzeugungsprozessen und daher als vielversprechender Ansatzpunkt für eine Effizienzsteigerung der Energie-und Ressourcennutzung anzusehen. Im Laufe des letzten Jahrzehnts haben automatisierte Optimierungsmethoden in Verbindung mit numerischer Simulation zunehmend breitere Verwendung als Mittel zur Effizienzsteigerung in vielen Bereichen der Ingenieurwissenschaften gefunden. Allerdings standen die komplexen Interaktionen zwischen Strömungs- und Strukturmechanik sowie der hohe nummerische Aufwand einem weitverbreiteten Einsatz dieser Methoden im Turbomaschinenbereich bisher entgegen. Das Ziel dieser Forschungsaktivität ist die Entwicklung einer effizienten Strategie zur metamodellbasierten Optimierung von radialen Verdichterlaufrädern. Dabei liegt der Schwerpunkt auf einer Reduktion des benötigten numerischen Aufwandes. Der in diesem Vorhaben gewählte Ansatz ist das Einbeziehen analytischer und empirischer Vorinformationen (“lowfidelity“) in den Sampling Prozess, um vielversprechende Bereiche des Parameterraumes zu identifizieren. Diese Informationen werden genutzt um die aufwendigen numerischen Berechnungen (“high-fidelity“) des strömungs- und strukturmechanischen Verhaltens der Laufräder in diesen Bereichen zu konzentrieren, während gleichzeitig eine ausreichende Abdeckung des gesamten Parameterraumes sichergestellt wird. Die Entwicklung der Optimierungsstrategie ist in drei zentrale Arbeitspakete aufgeteilt. In einem ersten Schritt werden die verfügbaren empirischen und analytischen Methoden gesichtet und bewertet. In dieser Recherche sind Verlustmodelle basierend auf eindimensionaler Strömungsmechanik und empirischen Korrelationen als bestgeeignete Methode zur Vorhersage des aerodynamischen Verhaltens der Verdichter identifiziert worden. Um eine hohe Vorhersagegüte sicherzustellen, sind diese Modelle anhand verfügbarer Leistungsdaten kalibriert worden. Da zur Vorhersage der mechanischen Belastung des Laufrades keine brauchbaren analytischen oder empirischen Modelle ermittelt werden konnten, ist hier ein Metamodel basierend auf Finite-Element Berechnungen gewählt worden. Das zweite Arbeitspaket beinhaltet die Entwicklung der angepassten Samplingmethode, welche Samples in Bereichen des Parameterraumes konzentriert, die auf Basis der Vorinformationen als vielversrechend angesehen werden können. Gleichzeitig müssen eine gleichmäßige Abdeckung des gesamten Parameterraumes und ein niedriges Niveau an Eingangskorrelationen sichergestellt sein. Da etablierte Methoden wie Markov-Ketten-Monte-Carlo-Methoden oder die Verwerfungsmethode diese Voraussetzungen nicht erfüllen, ist ein neues, mehrstufiges Samplingverfahren (“Filtered Sampling“) entwickelt worden. Das letzte Arbeitspaket umfasst die Entwicklung eines automatisiertenSimulations-Workflows. Dieser Workflow umfasst Geometrieparametrisierung, Geometrieerzeugung, Netzerzeugung sowie die Berechnung des aerodynamischen Betriebsverhaltens und der strukturmechanischen Belastung. Dabei liegt ein Schwerpunkt auf der Entwicklung eines Parametrisierungskonzeptes, welches auf strömungsmechanischen Zusammenhängen beruht, um so physikalisch nicht zielführende Parameterkombinationen zu vermeiden. Abschließend ist die auf den zuvor entwickelten Werkzeugen aufbauende Optimierungsstrategie erfolgreich eingesetzt worden, um drei Optimierungsfragestellungen zu bearbeiten. Im ersten und zweiten Testcase sind bestehende Verdichterlaufräder mit der vorgestellten Methode optimiert worden. Die erzielten Optimierungsergebnisse sind von ähnlicher Güte wie die solcher Optimierungen, die keine Vorinformationen berücksichtigen, allerdingswirdnurdieHälfteannumerischemAufwandbenötigt. IneinemdrittenTestcase ist die Methode eingesetzt worden, um ein neues Laufraddesign zu erzeugen. Im Gegensatz zu den vorherigen Beispielen werden im Rahmen dieser Optimierung stark unterschiedliche Designs untersucht. Dadurch kann an diesem dritten Beispiel aufgezeigt werden, dass die Methode auch für Parameterräume mit stakt variierenden Designs funktioniert. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2019,3 KW - Simulation KW - Maschinenbau KW - Optimierung KW - Strömungsmechanik KW - Strukturmechanik Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190910-39748 ER - TY - CHAP A1 - Sampaio, Alcinia Zita A1 - Henriques, Pedro T1 - Interactive project planning in construction based on virtual reality technology N2 - This paper describes a didactic application that is part of a research project whose main aim is to develop a computer-aided system which will assist design and construction processes. It is based on the visual simulation of construction activities. Geometric modeling and virtual reality techniques are used in the visualization of the design process and to define user-friendly interfaces in order to access construction information, which could prove useful to Civil Engineering professionals. As a first step, was developed a prototype that serves as a didactic tool for Civil Engineering students of disciplines concerned with building construction. The construction of a double brick wall is the case studied. The wall is defined as a three dimensional model formed with the several components needed to edify it. Using the wall's virtual model it is possible to show, in an interactive way, the sequence of the construction process and observe from any point of view the configurations in detail of the building components. This is then a didactic tool application in construction processes domain of great interest to Civil Engineering students. KW - Bauwesen KW - CAD KW - Optimierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3588 ER -