TY - CHAP A1 - Yahiaoui, Azzedine A1 - Hensen, Jan A1 - Soethout, Luc T1 - Developing CORBA-based distributed control and building performance environments by run-time coupling N2 - Communication software and distributed applications for control and building performance simulation software must be reliable, efficient, flexible, and reusable. This paper reports on progress of a project, which aims to achieve better integrated building and systems control modeling in building performance simulation by run-time coupling of distributed computer programs. These requirements motivate the use of the Common Object Request Broker Architecture (CORBA), which offers sufficient advantage than communication within simple abstraction. However, set up highly available applications with CORBA is hard. Neither control modeling software nor building performance environments have simple interface with CORBA objects. Therefore, this paper describes an architectural solution to distributed control and building performance software tools with CORBA objects. Then, it explains how much the developement of CORBA based distributed building control simulation applications is difficult. The paper finishes by giving some recommendations. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - CORBA Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1347 ER - TY - CHAP A1 - Vîlceanu, Victor A1 - Abrahamczyk, Lars A1 - Morgenthal, Guido T1 - Nonlinear Analysis of Structures: Wind Induced Vibrations N2 - The proceedings at hand are the result of the International Master Course Module: "Nonlinear Analysis of Structures: Wind Induced Vibrations" held at the Faculty of Civil Engineering at Bauhaus-University Weimar, Germany in the summer semester 2019 (April - August). This material summarizes the results of the project work done throughout the semester, provides an overview of the topic, as well as impressions from the accompanying programme. Wind Engineering is a particular field of Civil Engineering that evaluates the resistance of structures caused by wind loads. Bridges, high-rise buildings, chimneys and telecommunication towers might be susceptible to wind vibrations due to their increased flexibility, therefore a special design is carried for this aspect. Advancement in technology and scientific studies permit us doing research at small scale for more accurate analyses. Therefore scaled models of real structures are built and tested for various construction scenarios. These models are placed in wind tunnels where experiments are conducted to determine parameters such as: critical wind speeds for bridge decks, static wind coefficients and forces for buildings or bridges. The objective of the course was to offer insight to the students into the assessment of long-span cable-supported bridges and high-rise buildings under wind excitation. The participating students worked in interdisciplinary teams to increase their knowledge in the understanding and influences on the behaviour of wind-sensitive structures. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 0 KW - Ingenieurbau KW - Structural Engineering KW - wind-induced vibration KW - Konstruktiver Ingenieurbau KW - nonlinear analysis KW - Förderungsprogramm KW - Erasmus + Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191122-40337 ER - TY - JOUR A1 - van Treeck, Christoph A1 - Rank, Ernst T1 - Analysis of building structure and topology based on Graph Theory N2 - Individual views on a building product of people involved in the design process imply different models for planning and calculation. In order to interpret these geometrical, topological and semantical data of a building model we identify a structural component graph, a graph of room faces, a room graph and a relational object graph as aids and we explain algorithms to derive these relations. The application of the technique presented is demonstrated by the analysis and discretization of a sample model in the scope of building energy simulation. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Graphentheorie KW - Ingenieurbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2308 ER - TY - CHAP A1 - van Rooyen, G.C. A1 - Olivier, A. H. T1 - Notes on structural analysis in a distributed collaboratory N2 - The worldwide growth of communication networks and associated technologies provide the basic infrastructure for new ways of executing the engineering process. Collaboration amongst team members seperated in time and location is of particular importance. Two broad themes can be recognized in research pertaining to distributed collaboration. One theme focusses on the technical and technological aspects of distributed work, while the other emphasises human aspects thereof. The case of finite element structural analysis in a distributed collaboratory is examined in this paper. An approach is taken which has its roots in human aspects of the structural analysis task. Based on experience of how structural engineers currently approach and execute this task while utilising standard software designed for use on local workstations only, criteria are stated for a software architechture that could support collaborative structural analysis. Aspects of a pilot application and the results of qualitative performance measurements are discussed. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1451 ER - TY - CHAP A1 - Schley, Frank A1 - Mejstrik, Marcus A1 - Holz, K.-Peter T1 - Network Based Co-operation Platform for Geotechnical Engineering N2 - This paper describes an approach to support co-operation of experts in heterogeneous geotechnical engineering project environments during both regular execution and handling of exceptional situations. A co-operation platform is introduced which is based on a generalized information model mapping key information about the construction project, the construction process as well as the organization structure. Several tools are provided to operate the information model in a network based environment. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Geotechnik Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1431 ER - TY - JOUR A1 - Schleicher, W. A1 - Rieche, M. T1 - Die Anwendung der computergestützten Tragwerksplanung von konstruktiven Ingenieurbauwerken im Zuge des Verkehrsprojektes Inter-City-Express 97 N2 - Die Entwicklung Berlins zur neuen Hauptstadt des vereinigten Deutschlands erfordert den umfangreichen Ausbau der innerstädtischen Verkehrswege und eine umfassende Einbindung in das bundesweite Verkehrsnetz. Der Ausbau der Inter-City-Express-Strecke zwischen Hannover und Berlin bedingte eine Umplanung großer Streckenabschnitte der Deutschen Bahn AG. Im Zeitalter der computergestützten Informationsverarbeitung sind gerade auf dem Gebiet der Tragwerksplanung konstruktiver Ingenieurbauten vielfältige Möglichkeiten gegeben. So ist bei der Planung von Brückenneubauten eine durchgehende computergestützte Konstruktion und Tragwerksplanung vom Vorentwurf bis hin zur Fertigung möglich. Weiterhin gestatten besondere Berechnungsmethoden bei speziellen Belastungsarten eine exaktere Schnittkraft- und Spannungsermittlung und dadurch eine dem wirklichen Tragverhalten entsprechende genauere Nachweisführung. An Beispielen aus dem konstruktiven Ingenieurbau im Zuge der Sanierung der Berliner Stadtbahn wird die Anwendung moderner Rechentechnik und computergestützter Konstruktionsmethoden und Berechnungsverfahren diskutiert. Die Berliner Stadtbahn wird in weiten Abschnitten über gemauerte Ziegelsteinviadukte geführt. Das Konzept der Sanierungsmaßnahmen sah neben der Anordnung einer lastverteilenden Platte einen Gleisaufbau als Feste Fahrbahn vor. Zusätzlich wurden die Gleisabstände den heutigen Bundesbahnvorschriften angepaßt. Aus diesem Grund wurde eine genaue Nachrechnung der Stadbahnviadukte unter Berücksichtigung der verschiedensten Parameter (z.B. Fugen in der lastverteilenden Platte, Rißbildung im Mauerwerk, Schubverformungen in Fugen zwischen Beton und Mauerwerk bei Überschreitung von Grenzwerten) erforderlich. Die zwischen dem Berliner Hauptbahnhof und dem Bahnhof Jannowitzbrücke befindliche Eisenbahnüberführung über die Holzmarktstraße wurden abgebrochen. Das neue Bauwerk besteht aus einer zweifeldrigen, schiefwinkligen Deckbrücke für 4 Gleise. Auf Grund der komplizierten geometrischen Randbedingungen erfolgte eine durchgängige computergestützte Erstellung der Ausführungsunterlagen. Die Hauptabmessungen der Konstruktion wurden mit Hilfe von Vermessungsdaten bestimmt, die im CAD-Programm verarbeitet wurden. Die CAD-Daten bildeten die geometrischen Eingangsgrößen für das Berechnungsprogramm. Die Querschnittsdimensionierung der Berechnung ging dann in die CAD-Bearbeitung ein. Die Koordinaten für die Werkstattfertigung sowie für die Montage auf der Baustelle ergaben sich ebenfalls aus den Berechnungsergebnissen. KW - Ingenieurbau KW - CAD Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4989 ER - TY - CHAP A1 - Rueppel, Uwe A1 - Meißner, Udo F. A1 - Greb, Steffen T1 - A Petri Net based Method for Distributed Process Modelling in Structural Engineering N2 - The contribution introduces a method for the distributed process modelling in order to support the process orientation in Structural Engineering, i.e., the modelling, analysis and management of planning processes. The approach is based on the Petri Net theory for the modelling of planning processes and workflows in Structural Engineering. Firstly, a central and coarse process model serves as a pre-structuring system for the detailed modelling of the technical planning activities. Secondly, the involved planning participants generate distributed process models with detailed technical workflow information. Finally, these distributed process models will be combined in the central workflow net. The final net is of great importance for the process orientation in Structural Engineering, i.e., the identification, publication, analysis, optimization and finally the management of planning processes. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Petri-Netz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1338 ER - TY - THES A1 - Rahn, Andre T1 - "Monitoring an Brückenkappen mit Tellerankern" T1 - Monitoring at bridge caps with plate anchors N2 - Brückenkappen gewährleisten die Trennung der Verkehrsräume Fahrbahn und Gehweg und müssen aufgrund ihrer Anordnung im Querschnitt Schutz- und Leiteinrichtungen aufnehmen. Zur Verankerung der Brückenkappen am Überbau werden je nach Erfordernissen Anschlussbewehrung und / oder Telleranker angeordnet. Die vorliegende Arbeit analysiert grundlegende Möglichkeiten zur messtechnischen Untersuchung von Brückenkappen bei Anwendung von Tellerankern. Dabei werden die theoretische und konstruktiven Grundlagen der Kappenausbildung betrachtet. Außerdem werden die Zusammenhänge zwischen den auftretenden Einwirkungen und deren Auswirkungen auf Brückenkappen betrachtet. Darauf aufbauend werden Kennwerte zur Ermittlung der Beanspruchung in den Kappen und den Tellerankern abgeleitet und hinsichtlich der messtechnischen Erfassung und Auswertung der Messdaten analysiert. N2 - Bridge caps ensure the separation of the traffic areas to roadway and sidewalk and must take up protection and guidance establishments. For the anchorage of the bridge caps at the superstructure depending on the requirements connection armouring and/or plate anchors are arranged. The present work analyses fundamental possibilities for the instrumentation examination of bridge caps with use of plate anchors. The theoretical and constructive bases of the cap design are regarded. In addition the connections between the occurring effects and their consequences for bridge caps are regarded. Characteristic values are derived into the ascertainment of the strain in the caps and the plate anchors and are analysed regarding the instrumentation collection and evaluation of the measuring data. KW - Brücke KW - Monitoring KW - Ingenieurbau KW - Anker KW - Dehnung KW - Dehnungsmessung KW - Brückenbau KW - Telleranker Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080307-13431 ER - TY - CHAP A1 - Palm, Johan T1 - Integrated Engineering Workflow focused on the Structural Engineering in the Industrial Environment N2 - The engineering and construction industry has been slow to exploit the full potential of information technology. The industry is highly fragmented, price sensitive, risk-adverse, and profit margins are small. Each project is unique with a small amount of technological innovation opportunities to capitalise on from one project to the next. Technological innovations that have been taking place are just simulating the old traditional paper workflow. Engineering information in digital form is being conveyed using traditional paper representations, which have to be interpreted by humans before the information can be used in other applications, thereby creating ‘islands of information’. It can be seen that poorly implemented IT strategies are duplicating paperwork, rather than reducing or eliminating it (Crowley et al., 2000). This paper will introduce the Integrated Engineering Workflow (IEW) concept to re-organise a structural discipline working on multi-disciplinary projects so as to maximise the advantages offered by new information technology. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Prozessmanagement KW - Ingenieurbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1625 ER - TY - CHAP A1 - Olivier, A. H. T1 - An application-centred framework for distributed engineering applications N2 - The conceptual structure of an application that can support the structural analysis task in a distributed collaboratory is described in (van Rooyen and Olivier 2004). The application described there has a standalone component for executing the finite element method on a local workstation in the absence of network access. This application is comparable to current, local workstation based finite element packages. However, it differs fundamentally from standard packages since the application itself, and its objects, are adapted to support distributed execution of the analysis task. Basic aspects of an object-oriented framework for the development of applications which can be used in similar distributed collaboratories are described in this paper. An important feature of this framework is its application-centred design. This means that an application can contain any number of engineering models, where the models are formed by the collection of objects according to semantic views within the application. This is achieved through very flexible classes Application and Model, which are described in detail. The advantages of the application-centred design approach is demonstrated with reference to the design of steel structures, where the finite element analysis model, member design model and connection design model interact to provide the required functionality. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Framework Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1353 ER -