TY - THES A1 - ZHANG, CHAO T1 - Crack Identification using Dynamic Extended Finite Element Method and Thermal Conductivity Engineering for Nanomaterials N2 - Identification of flaws in structures is a critical element in the management of maintenance and quality assurance processes in engineering. Nondestructive testing (NDT) techniques based on a wide range of physical principles have been developed and are used in common practice for structural health monitoring. However, basic NDT techniques are usually limited in their ability to provide the accurate information on locations, dimensions and shapes of flaws. One alternative to extract additional information from the results of NDT is to append it with a computational model that provides detailed analysis of the physical process involved and enables the accurate identification of the flaw parameters. The aim here is to develop the strategies to uniquely identify cracks in two-dimensional 2D) structures under dynamic loadings. A local NDT technique combined eXtended Finite Element Method (XFEM) with dynamic loading in order to identify the cracks in the structures quickly and accurately is developed in this dissertation. The Newmark-b time integration method with Rayleigh damping is used for the time integration. We apply Nelder-Mead (NM)and Quasi-Newton (QN) methods for identifying the crack tip in plate. The inverse problem is solved iteratively, in which XFEM is used for solving the forward problem in each iteration. For a timeharmonic excitation with a single frequency and a short-duration signal measured along part of the external boundary, the crack is detected through the solution of an inverse time-dependent problem. Compared to the static load, we show that the dynamic loads are more effective for crack detection problems. Moreover, we tested different dynamic loads and find that NM method works more efficient under the harmonic load than the pounding load while the QN method achieves almost the same results for both load types. A global strategy, Multilevel Coordinate Search (MCS) with XFEM (XFEM-MCS) methodology under the dynamic electric load, to detect multiple cracks in 2D piezoelectric plates is proposed in this dissertation. The Newmark-b method is employed for the time integration and in each iteration the forward problem is solved by XFEM for various cracks. The objective functional is minimized by using a global search algorithm MCS. The test problems show that the XFEM-MCS algorithm under the dynamic electric load can be effectively employed for multiple cracks detection in piezoelectric materials, and it proves to be robust in identifying defects in piezoelectric structures. Fiber-reinforced composites (FRCs) are extensively applied in practical engineering since they have high stiffness and strength. Experiments reveal a so-called interphase zone, i.e. the space between the outside interface of the fiber and the inside interface of the matrix. The interphase strength between the fiber and the matrix strongly affects the mechanical properties as a result of the large ratio of interface/volume. For the purpose of understanding the mechanical properties of FRCs with functionally graded interphase (FGI), a closed-form expression of the interface strength between a fiber and a matrix is obtained in this dissertation using a continuum modeling approach according to the ver derWaals (vdW) forces. Based on the interatomic potential, we develop a new modified nonlinear cohesive law, which is applied to study the interface delamination of FRCs with FGI under different loadings. The analytical solutions show that the delamination behavior strongly depends on the interphase thickness, the fiber radius, the Young’s moduli and Poisson’s ratios of the fiber and the matrix. Thermal conductivity is the property of a material to conduct heat. With the development and deep research of 2D materials, especially graphene and molybdenum disulfide (MoS2), the thermal conductivity of 2D materials attracts wide attentions. The thermal conductivity of graphene nanoribbons (GNRs) is found to appear a tendency of decreasing under tensile strain by classical molecular dynamics (MD) simulations. Hence, the strain effects of graphene can play a key role in the continuous tunability and applicability of its thermal conductivity property at nanoscale, and the dissipation of thermal conductivity is an obstacle for the applications of thermal management. Up to now, the thermal conductivity of graphene under shear deformation has not been investigated yet. From a practical point of view, good thermal managements of GNRs have significantly potential applications of future GNR-based thermal nanodevices, which can greatly improve performances of the nanosized devices due to heat dissipations. Meanwhile, graphene is a thin membrane structure, it is also important to understand the wrinkling behavior under shear deformation. MoS2 exists in the stable semiconducting 1H phase (1H-MoS2) while the metallic 1T phase (1T-MoS2) is unstable at ambient conditions. As it’s well known that much attention has been focused on studying the nonlinear optical properties of the 1H-MoS2. In a very recent research, the 1T-type monolayer crystals of TMDCs, MX2 (MoS2, WS2 ...) was reported having an intrinsic in-plane negative Poisson’s ratio. Luckily, nearly at the same time, unprecedented long-term (>3months) air stability of the 1T-MoS2 can be achieved by using the donor lithium hydride (LiH). Therefore, it’s very important to study the thermal conductivity of 1T-MoS2. The thermal conductivity of graphene under shear strain is systematically studied in this dissertation by MD simulations. The results show that, in contrast to the dramatic decrease of thermal conductivity of graphene under uniaxial tensile, the thermal conductivity of graphene is not sensitive to the shear strain, and the thermal conductivity decreases only 12-16%. The wrinkle evolves when the shear strain is around 5%-10%, but the thermal conductivity barely changes. The thermal conductivities of single-layer 1H-MoS2(1H-SLMoS2) and single-layer 1T-MoS2 (1T-SLMoS2) with different sample sizes, temperatures and strain rates have been studied systematically in this dissertation. We find that the thermal conductivities of 1H-SLMoS2 and 1T-SLMoS2 in both the armchair and the zigzag directions increase with the increasing of the sample length, while the increase of the width of the sample has minor effect on the thermal conductions of these two structures. The thermal conductivity of 1HSLMoS2 is smaller than that of 1T-SLMoS2 under size effect. Furthermore, the temperature effect results show that the thermal conductivities of both 1H-SLMoS2 and 1T-SLMoS2 decrease with the increasing of the temperature. The thermal conductivities of 1HSLMoS2 and 1T-SLMoS2 are nearly the same (difference <6%) in both of the chiral orientations under corresponding temperatures, especially in the armchair direction (difference <2.8%). Moreover, we find that the strain effects on the thermal conductivity of 1HSLMoS2 and 1T-SLMoS2 are different. More specifically, the thermal conductivity decreases with the increasing tensile strain rate for 1T-SLMoS2, while fluctuates with the growth of the strain for 1HSLMoS2. Finally, we find that the thermal conductivity of same sized 1H-SLMoS2 is similar with that of the strained 1H-SLMoS2 structure. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2018,6 KW - crack KW - Wärmeleitfähigkeit KW - crack identification KW - thermal conductivity Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190119-38478 ER - TY - THES A1 - Weitze, Laura Katharina T1 - Erweiterte Prozessbewertung von Biogasanlagen unter Berücksichtigung organoleptischer Parameter und Erfahrungswissen N2 - Landwirtschaftliche Biogasanlagen leisten mit ca. 9.300 Anlagen und einem Anteil von 5,3% an der Stromerzeugung, einen Beitrag zur Erzeugung Erneuer-barer Energien in Deutschland. Die Optimierung dieser Anlagen fördert die nachhaltige Bereitstellung von Strom, Wärme und BioErdgas. Das Ergebnis dieser Forschungsarbeit ist die Entwicklung eines mehrmethodi-schen Bewertungsansatzes zur Beschreibung der Qualität der Eingangs-substrate als Teil einer ganzheitlichen Prozessoptimierung. Dies gelingt durch die kombinierte Nutzung klassischer Analysesätze, der Nutzung organolepti-scher Parameter – der humansensorischen Sinnenprüfung – und der Integration von prozess- und substratspezifischem Erfahrungswissen. Anhand von halbtechnischen Versuchen werden Korrelationen und Kausalitäten zwi-schen chemisch-physikalischen, biologischen, organoleptischen und erfahrungsbezogenen Parametern erforscht. Die Entwicklung einer Fallbasis mit Hilfe des Fallbasierten Schließens, einer Form Künstlicher Intelligenz, zeigt das Entwicklungs- und Integrationspotenzial der Automatisierung auf, insbesondere auch im Hinblick auf neue Ansätze z.B. Industrie 4.0. Erste Lösungen zur Bewältigung der identifizierten Herausforderungen der mehrmethodischen Prozessbewertung werden vorgestellt. Abschließend wird ein Ausblick auf den weiteren Forschungsbedarf gegeben und die Übertragbarkeit des mehrmethodischen Bewertungsansatzes auf andere Anwendungsfelder z.B. Bioabfallbehandlung, Kläranlagen angeregt. N2 - Agricultural biogas plants significantly contribute to the generation of renewable energies in Germany. Approx. 9,300 facilities account 5.3% of the total generated electricity in Germany. Optimization of these biogas plants will undoubtably promote the sustainable provision of electricity, heat and natural gas. This research study developed a multi-methodical assessment approach to de-scribe the quality of input substrates as part of a holistic process optimization. This is achieved by combination of conventional analysis, use of organoleptic parameters, integration of process- as well as substrate-specific experient ba-sed knowledge. Correlations and causalities between chemical-physical, biological, organoleptic and experiential parameters are explored. These inves-tigations based on semi-technical experiments. Using case-based reasoning, a form of artificial intelligence, demonstrates the potential for development and integration of automation. Solving approaches to overcome the challenges of multi-methodical process assessment are presented. Finally, an outlook on further research needs is given. Furthermore, the trans-ferability of the multi-methodical assessment approach to other fields of application like bio-waste treatment or sewage treatment plants, is incited. KW - Biogasanlage KW - Erfahrungswissen KW - Maissilage KW - Optimierung KW - Biogas KW - Organoleptik Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190129-38499 ER - TY - THES A1 - Walther, Franziska T1 - Über den Wirkungsanspruch von Illustratoren in literarischer Buchillustration: Eine diskurskritische und praxis-basierte Studie N2 - Zum Begriff Illustration scheint ein Missverhältnis zwischen wissenschaftlicher Rezeption und praktischem Gegenstand vorzuliegen. Traditionell bezeichnet der Begriff Illustration ein Bild, das einen textlich vorangestellten Inhalt noch einmal visuell wiederholt und auf diesem Weg in einem Abbild verdoppelt. Traditionelle Illustration benennt also ein sekundäres, explizit von einem anderen Inhalt abhängiges Bild, das auch weggelassen werden könnte, ohne das Inhalt verloren geht. Genutzt wird dieser traditionelle Illustrationsbegriff heute unter anderem in den Forschungsfeldern der Kunstgeschichte, der Bildwissenschaften und der Literatur­wissenschaften. Aus der Perpektive der Praxis birgt der traditionelle Illustrationsbegriff ein grundsätzliches Problem in sich. Er versucht, mit einer statischen Definition ein äußerst lebendiges visuelles Phänomen unserer heutigen Zeit zu beschreiben. Professionelle Berufszeichner, die sogenannten Illustratorinnen und Illustratoren, kreieren heute Werke, die mit dem traditionellen Illustrations­begriff nicht mehr beschreibbar sind. Mehr noch, der traditionelle Illustrationsbegriff macht blind für diese Entwicklungen, die sich deshalb außerhalb des wissenschaft­lichen Diskurses abspielen. Die vorliegende Arbeit möchte deshalb einen Blick auf den Zustand zeitgenössischer literarischer Buch­illustration werfen, um den Begriff der Illustration in seiner aktuellen Unschärfe zu präzisieren, zu erweitern und somit zu aktualisieren. KW - Illustration KW - Illustriertes Buch KW - Autorschaft KW - Buchgestaltung KW - Digitalisierung KW - Bild-Autorenschaft KW - Text-bild-basierte Narration KW - Traditioneller Illustrationsbegriff KW - Zeitgenössischer Illustrationsbegriff KW - Praxisbasierte Forschung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190924-39888 ER - TY - THES A1 - Völske, Michael T1 - Retrieval Enhancements for Task-Based Web Search N2 - The task-based view of web search implies that retrieval should take the user perspective into account. Going beyond merely retrieving the most relevant result set for the current query, the retrieval system should aim to surface results that are actually useful to the task that motivated the query. This dissertation explores how retrieval systems can better understand and support their users’ tasks from three main angles: First, we study and quantify search engine user behavior during complex writing tasks, and how task success and behavior are associated in such settings. Second, we investigate search engine queries formulated as questions, and explore patterns in a large query log that may help search engines to better support this increasingly prevalent interaction pattern. Third, we propose a novel approach to reranking the search result lists produced by web search engines, taking into account retrieval axioms that formally specify properties of a good ranking. N2 - Die Task-basierte Sicht auf Websuche impliziert, dass die Benutzerperspektive berücksichtigt werden sollte. Über das bloße Abrufen der relevantesten Ergebnismenge für die aktuelle Anfrage hinaus, sollten Suchmaschinen Ergebnisse liefern, die tatsächlich für die Aufgabe (Task) nützlich sind, die diese Anfrage motiviert hat. Diese Dissertation untersucht, wie Retrieval-Systeme die Aufgaben ihrer Benutzer besser verstehen und unterstützen können, und leistet Forschungsbeiträge unter drei Hauptaspekten: Erstens untersuchen und quantifizieren wir das Verhalten von Suchmaschinenbenutzern während komplexer Schreibaufgaben, und wie Aufgabenerfolg und Verhalten in solchen Situationen zusammenhängen. Zweitens untersuchen wir Suchmaschinenanfragen, die als Fragen formuliert sind, und untersuchen ein Suchmaschinenlog mit fast einer Milliarde solcher Anfragen auf Muster, die Suchmaschinen dabei helfen können, diesen zunehmend verbreiteten Anfragentyp besser zu unterstützen. Drittens schlagen wir einen neuen Ansatz vor, um die von Web-Suchmaschinen erstellten Suchergebnislisten neu zu sortieren, wobei Retrieval-Axiome berücksichtigt werden, die die Eigenschaften eines guten Rankings formal beschreiben. KW - Information Retrieval Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190709-39422 ER - TY - THES A1 - Tasch, Alexander T1 - Reaktive Cu-Fe-Al-Mn-Oxidkeramiken für die Sauerstoffseparation aus der Luft N2 - Die Gase Sauerstoff und Stickstoff werden für eine Vielzahl an technischen, industriellen, biologischen und medizinischen Einsatzzwecken benötigt. So liegen Anwendungsgebiete dieser Gase neben der klassischen metallverarbeitenden und der chemischen Industrie bei Sauerstoff vor allem in der Medizin, Verbrennungs- und Kläranlagenoptimierung sowie der Fischzucht und bei Stickstoff als Schutz- beziehungsweise Inertgas in der Kunststoffindustrie, der Luft- und Raumfahrt sowie dem Brandschutz. Die Bereitstellung der Gase Sauerstoff und Stickstoff wird nahezu ausschließlich durch die Abtrennung aus der Umgebungsluft realisiert, welche aus ca. 78 Vol.-% Stickstoff, 21 Vol.-% Sauerstoff und 1 Vol.-% Spurengasen (Ar, CO2, Ne, He, ...) besteht. Am Markt etablierte Verfahren der Luftzerlegung sind das Linde-, das PSA- (pressure swing adsorption/Druckwechseladsorption) oder verschiedene Membran-Verfahren. Hierdurch werden die benötigten Gase entweder direkt vor Ort beim Verbraucher erzeugt (PSA- und Polymer-Membranverfahren: geringe Reinheiten) oder zentral in großen Anlagen hergestellt (Linde-Verfahren: hohe Reinheiten) und anschließend zum Verbraucher in Form von Flaschen- oder Tankgasen geliefert (Tansportkosten). Für kleinere Verbraucher mit hohen Ansprüchen an die Reinheit des benötigten Sauerstoffs beziehungsweise Stickstoffs ergibt sich nur die Möglichkeit, die Gase als kostenintensive Transportgase zentraler Gaseversorger zu beziehen und sich somit in eine Abhängigkeit (Lieferverträge, Flaschen-/Tankmieten, ...) zu diesen zu begeben sowie eine eigene Lagerhaltung für die benötigten Gase (Mehraufwand, Lagerkosten, Platzbedarf) zu betreiben. Ziel dieser Arbeit ist es, keramische Material-Systeme auf Basis chemischer Hochtemperatur-Reaktionen als Reaktive Oxidkeramiken zu entwickeln und diese hinsichtlich eines möglichen Einsatzes für die Sauerstoffseparation in neuartigen Luftzerlegungsanlagen zu untersuchen. Derartige Anlagen sollen in ihrem Prinzip an die regenerative Sauerstoffseparation angelehnt sein und in ihren Reaktoren die Reaktiven Oxidkeramiken als Festbett-Material abwechselnd mit Luft be- und Vakuum oder O2-armen Atmosphären entladen. Die Verwendung Reaktiver Oxidkeramiken, welche im Vergleich zu den bisherigen Materialien höhere Sauerstoffaustauschmengen und -raten bei gleichzeitig hoher Lebensdauer und Korrosionsbeständigkeit sowie relativ einfacher Handhabe aufweisen würden, soll ein Schritt in Richtung einer effizienten alternativen Luftzerlegungstechnologie sein. Mit den Reaktiven Oxidkeramiken in einer Luftzerlegungsanlage sollte es im besten Fall möglich sein, in kleinen Anlagen sehr reinen Sauerstoff und zugleich sauerstofffreies Inertgas zu erzeugen sowie eine Sauerstoffan- oder -abreicherung von Luft, Prozess- oder Abgasen zu generieren. Somit besäße eine solche, auf Reaktiven Oxidkeramiken basierende Technologie sehr weit gefächerte Einsatzgebiete und demzufolge ein enormes wirtschaftliches Potential. KW - Luftzerlegung KW - Sauerstoff KW - Stickstoff KW - Inertgas KW - Oxidkeramik KW - Sauerstoffseparation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191209-40414 ER - TY - THES A1 - Tan, Fengjie T1 - Shape Optimization Design of Arch Type Dams under Uncertainties N2 - Due to an increased need for hydro-electricity, water storage, and flood protection, it is assumed that a series of new dams will be built throughout the world. Comparing existing design methodologies for arch-type dams, model-based shape optimization can effectively reduce construction costs and leverage the properties of construction materials. To apply the means of shape optimization, suitable variables need to be chosen to formulate the objective function, which is the volume of the arch dam here. In order to increase the consistency with practical conditions, a great number of geometrical and behavioral constraints are included in the mathematical model. An optimization method, namely Genetic Algorithm is adopted which allows a global search. Traditional optimization techniques are realized based on a deterministic approach, which means that the material properties and loading conditions are assumed to be fixed values. As a result, the real-world structures that are optimized by these approaches suffer from uncertainties that one needs to be aware of. Hence, in any optimization process for arch dams, it is nec- essary to find a methodology that is capable of considering the influences of uncertainties and generating a solution which is robust enough against the uncertainties. The focus of this thesis is the formulation and the numerical method for the optimization of the arch dam under the uncertainties. The two main models, the probabilistic model, and non-probabilistic models are intro- duced and discussed. Classic procedures of probabilistic approaches un- der uncertainties, such as RDO (robust design optimization) and RBDO (reliability-based design optimization), are in general computationally ex- pensive and rely on estimates of the system’s response variance and fail- ure probabilities. Instead, the robust optimization (RO) method which is based on the non-probabilistic model, will not follow a full probabilistic approach but works with pre-defined confidence levels. This leads to a bi-level optimization program where the volume of the dam is optimized under the worst combination of the uncertain parameters. By this, robust and reliable designs are obtained and the result is independent of any as- sumptions on stochastic properties of the random variables in the model. The optimization of an arch-type dam is realized here by a robust optimiza- tion method under load uncertainty, where hydraulic and thermal loads are considered. The load uncertainty is modeled as an ellipsoidal expression. Comparing with any traditional deterministic optimization (DO) method, which only concerns the minimum objective value and offers a solution candidate close to limit-states, the RO method provides a robust solution against uncertainties. All the above mentioned methods are applied to the optimization of the arch dam to compare with the optimal design with DO methods. The re- sults are compared and analyzed to discuss the advantages and drawbacks of each method. In order to reduce the computational cost, a ranking strategy and an ap- proximation model are further involved to do a preliminary screening. By means of these, the robust design can generate an improved arch dam structure which ensures both safety and serviceability during its lifetime. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2019,2 KW - Wasserbau KW - Staudamm KW - dams Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190819-39608 ER - TY - THES A1 - Straßmann, Sarah T1 - Expanded Pictures: Das Handlungsgefüge des fotografischen Bildes im Kontext von Internet und Social Media N2 - In der vorliegenden Arbeit wird die Bedeutung und Funktion des fotografischen Bildes und im Besonderen der Handyfotografie im Kontext von Internet und sozialen Onlinenetzwerken beschrieben, untersucht und diskutiert. Im Spannungsfeld zwischen sozialwissenschaftlichen Theorien, foto- und medientheoretischem Diskurs sowie ästhetisch künstlerischen Perspektiven wird ausgelotet, welche konkreten visuellen und sozialen Formen die gegenwärtige mobile digitale Bildpraxis angenommen hat, wie sich ihre Gebrauchsweise innerhalb des globalen gesellschaftlichen Alltags darstellt, und in welcher Weise ihr spezielles Zusammenspiel aus „shooting“, „uploading“, „sharing“ zu neuen menschlichen Handlungsmustern und zur Schaffung neuer kultureller Realitäten beiträgt. KW - Digitale Fotografie KW - Selfie KW - Social Media KW - Kommunikation KW - Stereotyp KW - Performative Fotografie KW - Fotografie als Handlung KW - Fotografisches Handlungsgefüge Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190102-38388 ER - TY - THES A1 - Steiner, Marion T1 - Die chilenische Steckdose. Kleine Weltgeschichte der deutschen Elektrifizierung von Valparaíso und Santiago, 1880-1920 N2 - Am Beispiel der Elektrifizierung zweier Großstädte an der Westküste Südamerikas zeigt die Arbeit den globalen Einfluss deutscher Industrie- und Finanzakteure auf technische, städtebauliche und gesellschaftlich-kulturelle Entwicklungen zur Blütezeit des europäischen Imperialismus auf. Damit werden die Regionalgeschichten der chilenischen Hauptstadtregion und der Elektropolis Berlin zu einer Globalgeschichte miteinander verknüpft. Ein Hauptaugenmerk der Analyse liegt dabei auf den weltweiten Akteursnetzwerken und Machtverhältnissen sowie dem kulturellen Erbe und seiner gegenwärtigen Interpretation. N2 - Resumen. Tomando como ejemplo la electrificación de dos grandes ciudades en la costa oeste de Sudamérica, la tesis muestra la influencia global de actores industriales y financieros alemanes en el desarrollo técnico, urbano y sociocultural en el apogeo del imperialismo europeo. De esta manera, las historias regionales del centro urbano de Chile y la Electrópolis Berlín se unen para formar una historia global. El análisis se centra en las redes mundiales de actores y las relaciones de poder, así como en el patrimonio cultural y su interpretación actual. N2 - Abstract. Using the example of the electrification of two large cities on the South American west coast, the thesis shows the global influence of German industrial and financial actors on technical, urban and socio-cultural developments at the heyday of European imperialism. In this way, the regional histories of Chile’s capital region and the Elektropolis Berlin are linked to form a global history. The analysis focuses on the worldwide actor networks and power relations as well as on the cultural heritage and its current interpretation. KW - Weltgeschichte KW - Stadtforschung KW - Elektrifizierung KW - Infrastruktur KW - Kulturerbe KW - Globalgeschichte KW - Infrastrukturgeschichte KW - Valparaíso KW - Wirtschaftsimperialismus KW - Technikgeschichte KW - Industriekultur KW - Stadtentwicklung KW - Elektropolis Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190517-39257 ER - TY - THES A1 - Steindorf, Johanna T1 - Speaking from Somewhere: Der Audio-Walk als künstlerische Praxis und Methode N2 - In der vorliegenden Arbeit „Speaking from Somewhere: Der Audio-Walk als künstlerische Praxis und Methode“ wird der Audio-Walk auf theoretischer und praktischer Basis untersucht. Der erste Teil widmet sich dem Audio-Walk als künstlerisches Format. Darin wird analysiert, wie dieses aufgebaut ist und welche Komponenten wie zusammenwirken, damit sich die Darbietung – und die dafür charakteristisch intensive Wirkung – entfalten kann. Im zweiten Teil wird der Audio-Walk als experimentelle mobile Methode für die künstlerische Forschung betrachtet. Im Zentrum steht dabei die Frage, wie sich das künstlerische Format nutzen lässt, um spezifische Fragestellungen an einen ausgewählten Personenkreis zu adressieren, der sich währenddessen in einer inszenierten Situation befindet. Der Schwerpunkt liegt dabei auf Audio-Walk-Experimenten, die mit dieser Absicht entwickelt wurden. Als Fallbeispiel für die Methode dient dabei die Zusammenarbeit mit einer Gruppe kürzlich nach Deutschland migrierter Frauen. KW - Aufführung KW - Migration KW - Feminismus KW - Klangkunst KW - Künstlerische Forschung KW - Audio-Walk KW - Audiowalk KW - Psychogeographie KW - Kunst KW - Mobile Media Art Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190924-39930 ER - TY - THES A1 - Sidjimovska, Ivana T1 - Recounting Skopje. Skopje 2014: Symbolic and Citizens' Narratives N2 - Focusing on the neoliberal symbolic urban reconstruction of the Macedonian capital, known as “Skopje 2014”, the PhD work deals with urban space production through storytelling. Embracing the criticism put forward in the political, cultural and social debates that have spun around Skopje’s reconstruction, the artistic-based research sought to relate and analyze the symbolic narratives of “Skopje 2014” and the vernacular and civic narratives of Skopje and locate overlapping, divergent, complementary or conflictual aspects of their respective narrative structures. Informed by subjective citizens’ stories and experiences of the urban as well as binaural sonic observations of the city, the research findings were presented in the form of an interactive audio guided walk through the city. The thesis is organized in three chapters, preceded by an INTRODUCTION and followed by a CONCLUSION. CHAPTER ONE sets the theoretical context, presents the case study “Skopje 2014”, and discusses the research design. The audio guided walk is presented in CHAPTER TWO. Its content consists of five tracks, or subchapters, conceptualized and named as five different aspects of the city: THE MODERNIST CITY, THE FEMALE CITY, THE MEMORY CITY, THE POSTCOMMUNIST CITY and THE TOURIST CITY, according to the discourses related to these tracks. CHAPTER THREE, the EPILOGUE, is the final discussion of the research project, in which several meta-conclusions are drawn. KW - Stadtumbau KW - Skopje 2014 KW - neoliberal urban reconstruction KW - urban narratives KW - artistic research KW - art in public space KW - audio walk KW - Audioführung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191119-40256 ER -