TY - JOUR A1 - Vollmer, Lisa T1 - Der Gentrifizierungsbegriff in wohnungspolitischen Protesten. Kommentar zu Neil Smiths „Für eine Theorie der Gentrifizierung: ‚Zurück in die Stadt‘ als Bewegung des Kapitals, nicht der Menschen“ (2019 [1979]) JF - sub\urban. zeitschrift für kritische stadtforschung N2 - Seit 50 Jahren wird über Erklärungsansätze für Gentrifizierung gestritten. Sehr viel länger schon wandert anlagesuchendes Kapital von einem Ort zum anderen und hinterlässt dabei Investitionsruinen einerseits und Menschen, die durch Verdrängung ihr Zuhause verlieren, andererseits. Sehr viel kürzer erst wird der Begriff Gentrifizierung hier und da von sozialen Bewegungen aufgegriffen, die sich mit letzterem Phänomen auseinandersetzen. In diesem Beitrag soll es nicht um die wissenschaftliche Debatte um Erklärungsansätze für Gentrifizierung und auch nicht um die wissenschaftliche Relevanz des Begriffes gehen, sondern um seine Rolle und Funktion in sozialen Bewegungen. KW - Soziale Bewegung KW - Gentrifizierung KW - Wohnen KW - OA-Publikationsfonds2019 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200122-40643 UR - https://zeitschrift-suburban.de/sys/index.php/suburban/article/view/493/740 VL - 2019 IS - Band 7, Heft 3 SP - 113 EP - 118 ER - TY - THES A1 - Hutfless, Cornelius T1 - Der Einfluss kommunaler Planung auf die Gestaltung von Neubauvorhaben am Beispiel der Weimarer Innenstadt N2 - Die massive Neubautätigkeit in Deutschland hat die Diskussion um Baukultur wieder verstärkt angestoßen. Dabei wird der Einfluss der kommunalen Planung auf die Baugestaltung sowohl in der Öffentlichkeit als auch der Fachliteratur nur unzureichend thematisiert. Die vorliegende Arbeit von Cornelius Hutfless untersucht die Thematik am konkreten Beispiel der Weimarer Innenstadt. Hierzu wurden die neun formellen und informellen Instrumente analysiert und bewertet, mit denen die kommunale Planung in Weimar seit dem Jahr 1990 unmittelbaren Einfluss auf die Baugestaltung von Neubauprojekten genommen hat: Bebauungspläne, der Denkmalschutz, Sanierungssatzungen, Gestaltungssatzungen, Wettbewerbe, der Gestaltungsbeirat, die Bauberatung, Fachkonzepte und die Öffentlichkeitsbeteiligung. Methodisch kamen die Quellenanalyse, die Fallanalyse und die Stärken-Schwächen-Analyse zum Einsatz. Die Recherchearbeit wurde durch sechs leitfadengestützte Expert*inneninterviews mit Schlüsselpersonen der Weimarer Baugestaltung ergänzt. Dieser Forschungsansatz veranschaulicht den Einfluss kommunaler Planung auf die Gestaltung von Neubauvorhaben erstmalig am Fallbeispiel einer einzelnen deutschen Stadt, indem alle angewendeten Instrumente analysiert wurden. Für Forscher*innen ermöglicht der Bezug auf ein konkretes Untersuchungsgebiet einen praxisnahen Zugang zum Thema Baugestaltung. Stadtplaner*innen veranschaulicht das Beispiel Weimar außerdem, wie umfangreich und restriktiv die kommunalen Möglichkeiten sind, auf die Baugestaltung einzuwirken. Vorbildlich im Sinne einer konsequenten Strategie der Baugestaltung sind in Weimar zum einen die strengen Festsetzungen in den Bebauungsplänen des Untersuchungsgebietes, deren Umsetzung durch die Einsetzung von Baubeiräten gesichert wird. Zum anderen ist der kommunalpolitische Rückhalt ein grundlegender Erfolgsfaktor, der u. a. den Empfehlungen des Gestaltungsbeirates Nachdruck verleiht. Zudem verfügt Weimar über eine umfangreiche Denkmalausweisung. Durch die umfassende Nutzung und Kombination der Instrumente, hat die kommunale Planung in Weimar erfolgreich einen Rahmen geschaffen, der baugestalterische Standards gewährleistet. Der Charakter der Weimarer Innenstadt konnte erhalten werden, obwohl moderne Neubauentwicklungen zugelassen wurden. Das Beispiel Weimar zeigt also, dass Baugestaltungsqualität wesentlich von dem klaren Anspruch einer Kommune nach Prozess- und Verfahrensqualität abhängt. Verbesserungswürdig ist in Weimar hingegen die Öffentlichkeitsbeteiligung bei Gestaltungsfragen. Schon vor der Schaffung planungsrechtlicher Tatsachen sollte zukünftig die Öffentlichkeit umfangreicher in Baugestaltungsprozesse eingebunden und dafür die Möglichkeiten ergänzender, informeller Verfahren ausgeschöpft werden. Nur dann ist eine restriktive Stadtgestaltungspolitik, im Sinne der Wahrung öffentlicher Interessen ganzheitlich positiv zu bewerten. Ausgezeichnet mit dem Hochschulpreis der Bauhaus-Universität Weimar 2018 T3 - IfEU.OPEN - 2 KW - Weimar KW - Kommunalplanung KW - Architektur KW - Bebauungsplan KW - Denkmalpflege KW - Baugestaltung KW - Baukultur KW - Sanierungssatzung KW - Gestaltungssatzung KW - Wettbewerbswesen KW - Gestaltungsbeirat KW - Bauberatung KW - Fachkonzept KW - Öffentlichkeitsbeteiligung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200116-40639 N1 - Ausgezeichnet mit dem Hochschulpreis der Bauhaus-Universität Weimar 2018 ER - TY - JOUR A1 - Gürlebeck, Klaus A1 - Legatiuk, Dmitrii A1 - Nilsson, Henrik A1 - Smarsly, Kay T1 - Conceptual modelling: Towards detecting modelling errors in engineering applications JF - Mathematical Methods in Applied Sciences N2 - Rapid advancements of modern technologies put high demands on mathematical modelling of engineering systems. Typically, systems are no longer “simple” objects, but rather coupled systems involving multiphysics phenomena, the modelling of which involves coupling of models that describe different phenomena. After constructing a mathematical model, it is essential to analyse the correctness of the coupled models and to detect modelling errors compromising the final modelling result. Broadly, there are two classes of modelling errors: (a) errors related to abstract modelling, eg, conceptual errors concerning the coherence of a model as a whole and (b) errors related to concrete modelling or instance modelling, eg, questions of approximation quality and implementation. Instance modelling errors, on the one hand, are relatively well understood. Abstract modelling errors, on the other, are not appropriately addressed by modern modelling methodologies. The aim of this paper is to initiate a discussion on abstract approaches and their usability for mathematical modelling of engineering systems with the goal of making it possible to catch conceptual modelling errors early and automatically by computer assistant tools. To that end, we argue that it is necessary to identify and employ suitable mathematical abstractions to capture an accurate conceptual description of the process of modelling engineering systems. KW - Angewandte Mathematik KW - Angewandte Informatik KW - Ingenieurwissenschaften KW - Modellierung KW - engineering KW - abstraction KW - modelling KW - formal approaches KW - type theory Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200110-40614 UR - https://onlinelibrary.wiley.com/doi/abs/10.1002/mma.5934 SP - 1 EP - 10 ER - TY - JOUR A1 - Ouaer, Hocine A1 - Hosseini, Amir Hossein A1 - Amar, Menad Nait A1 - Ben Seghier, Mohamed El Amine A1 - Ghriga, Mohammed Abdelfetah A1 - Nabipour, Narjes A1 - Andersen, Pål Østebø A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin T1 - Rigorous Connectionist Models to Predict Carbon Dioxide Solubility in Various Ionic Liquids JF - Applied Sciences N2 - Estimating the solubility of carbon dioxide in ionic liquids, using reliable models, is of paramount importance from both environmental and economic points of view. In this regard, the current research aims at evaluating the performance of two data-driven techniques, namely multilayer perceptron (MLP) and gene expression programming (GEP), for predicting the solubility of carbon dioxide (CO2) in ionic liquids (ILs) as the function of pressure, temperature, and four thermodynamical parameters of the ionic liquid. To develop the above techniques, 744 experimental data points derived from the literature including 13 ILs were used (80% of the points for training and 20% for validation). Two backpropagation-based methods, namely Levenberg–Marquardt (LM) and Bayesian Regularization (BR), were applied to optimize the MLP algorithm. Various statistical and graphical assessments were applied to check the credibility of the developed techniques. The results were then compared with those calculated using Peng–Robinson (PR) or Soave–Redlich–Kwong (SRK) equations of state (EoS). The highest coefficient of determination (R2 = 0.9965) and the lowest root mean square error (RMSE = 0.0116) were recorded for the MLP-LMA model on the full dataset (with a negligible difference to the MLP-BR model). The comparison of results from this model with the vastly applied thermodynamic equation of state models revealed slightly better performance, but the EoS approaches also performed well with R2 from 0.984 up to 0.996. Lastly, the newly established correlation based on the GEP model exhibited very satisfactory results with overall values of R2 = 0.9896 and RMSE = 0.0201. KW - Maschinelles Lernen KW - Machine learning KW - OA-Publikationsfonds2020 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200107-40558 UR - https://www.mdpi.com/2076-3417/10/1/304 VL - 2020 IS - Volume 10, Issue 1, 304 PB - MDPI ER - TY - JOUR A1 - Shamshirband, Shahaboddin A1 - Joloudari, Javad Hassannataj A1 - GhasemiGol, Mohammad A1 - Saadatfar, Hamid A1 - Mosavi, Amir A1 - Nabipour, Narjes T1 - FCS-MBFLEACH: Designing an Energy-Aware Fault Detection System for Mobile Wireless Sensor Networks JF - Mathematics N2 - Wireless sensor networks (WSNs) include large-scale sensor nodes that are densely distributed over a geographical region that is completely randomized for monitoring, identifying, and analyzing physical events. The crucial challenge in wireless sensor networks is the very high dependence of the sensor nodes on limited battery power to exchange information wirelessly as well as the non-rechargeable battery of the wireless sensor nodes, which makes the management and monitoring of these nodes in terms of abnormal changes very difficult. These anomalies appear under faults, including hardware, software, anomalies, and attacks by raiders, all of which affect the comprehensiveness of the data collected by wireless sensor networks. Hence, a crucial contraption should be taken to detect the early faults in the network, despite the limitations of the sensor nodes. Machine learning methods include solutions that can be used to detect the sensor node faults in the network. The purpose of this study is to use several classification methods to compute the fault detection accuracy with different densities under two scenarios in regions of interest such as MB-FLEACH, one-class support vector machine (SVM), fuzzy one-class, or a combination of SVM and FCS-MBFLEACH methods. It should be noted that in the study so far, no super cluster head (SCH) selection has been performed to detect node faults in the network. The simulation outcomes demonstrate that the FCS-MBFLEACH method has the best performance in terms of the accuracy of fault detection, false-positive rate (FPR), average remaining energy, and network lifetime compared to other classification methods. KW - Vernetzung KW - wireless sensor networks KW - machine learning KW - Funktechnik KW - Sensor KW - Maschinelles Lernen KW - Internet of Things KW - OA-Publikationsfonds2019 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200107-40541 UR - https://www.mdpi.com/2227-7390/8/1/28 VL - 2020 IS - Volume 8, Issue 1, article 28 PB - MDPI ER - TY - THES A1 - Doering, Chris T1 - Die Informationsarchitektur der kommunalen Energiewende N2 - Die kommunale Energiewende stellt die beteiligten Akteure vor große Herausforderungen: Auf Grundlage strukturierter Daten sollen Maßnahmen
 für eine nachhaltige Infrastruktur geplant und umgesetzt werden. Oft fehlt
 den Beteiligten jedoch das nötige Wissen über die lokalen Potentiale und Rahmenbedingungen—und an geeigneten Methoden der Informationsvermittlung. Gegenstand dieser Arbeit ist die Analyse der Planungsstrukturen und der Entwurf eines visuellen Informationssystems. Mit der vorliegenden Untersuchung wird gezeigt, wie mit Hilfe von Befragungen, partizipativen Visualisierungen, fiktionalen Szenarien und der systematischen Anwendung visueller Variablen eine fundierte Grundlage geschaffen werden kann für eine nutzerorientierte Gestaltung. N2 - The municipal energy transition confronts the actors involved with major challenges: Measures for a sustainable infrastructure should be planned and implemented on the basis of structured data. Often, however, the parties lack the necessary knowledge of the local potentials and conditions—and on suitable methods of presenting information. Subject of this work is the analysis of planning structures and the design of a visual information system. This study shows how surveys, participatory visualizations, fictional scenarios and the systematic use of visual variables can create a sound basis for user-centered design. KW - Design KW - Mediendesign KW - Semiotik KW - Stadtplanung KW - Energiewende KW - Visuelle Semiotik KW - Informationsdesign Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191219-40514 ER - TY - THES A1 - Elrasoul, Riham T1 - Designing Urban National Memory N2 - The study of memory, architecture, and urban space has been the interest ‎of ‎researchers ‎from the diverse fields around the world due to, the significance of dealing ‎with ‎memories ‎especially after the tragedy of the Second World War. Nations in Europe has chosen ‎not to ‎neglect ‎their past, moreover, overcoming it by strengthening the national identity. An ‎approach was clear in ‎the literature, art, further in the way of rebuilding their cities; that mainly ‎has reflected on the ‎value of urban spaces and their role in narrating the country’s national ‎memory. Thanks to this ‎approach, which has supported the post-war European nations to invite ‎to an act of ‎ forgiveness rather than to forget. ‎ On the contrary, memory, in relation to architecture is a form of knowledge has been ‎neglected in Egypt, especially during the previous decades after the declaration of independence ‎from the colonial power, and since 1952 revolution. Recently, a rising debate about Egypt ‎national history and the need to renationalize the Egyptian historical consciousness has rapidly ‎grown up, due to the political transformation has occurred because of the 25th uprising, 2011, ‎which unveiled the power of public spaces in constituting the nation thoughts, especially Tahrir ‎square.‎ At the same time, this has unveiled the results of neglecting the past instead of overcoming it; unveiled a present carries the danger of conflict and repeating previous mistakes. Researchers, historians, politicians, governmental organization, have ‎worked in the purpose of revisiting the historical information, and have tried to document the ‎current transformation of the 25th uprising. There was a public demand for redesigning Tahrir square to reflect the ‎memory of the uprising as a symbol of the power of the public. However, after eight years, those ‎memories have faded as if the 25th uprising has never happened. ‎ Those circumstances are very relevant to the gap between urban design and the art of ‎memory-work, in the scientific field. Few studies in Egypt conducted the concept of memory in ‎relation to urban spaces, however, the matter requires more attention, to associate the need for renationalizing Egypt ‎memory, with viewing urban space as a mean of narrating the country’s national memory and ‎reflecting the citizens' current thoughts, as a try of nearing the distances between ‎competing ‎narratives. Therefore, the research aims at developing a methodological framework that should ‎contribute to renationalizing memory through urban space. Further, benefiting from the German experience by investigating lessons to learn. That is based on the hypothesis that, although there is no fixed formula for all countries to renationalize the historical ‎consciousness of memory through urban spaces, lessons to be learned from Germany experience ‎could be a driving dimension when designing Egyptian urban spaces with a concept of memory ‎as an essential factor. To guide the validity of the study’s hypothesis, a set of research questions are thus ‎formulated: Starting from why memory is an essential factor when designing urban spaces? ‎Regarding Egypt national memory, how it was constituted through history and how to read its ‎representation on urban spaces? Also, the study quests the means of nationalizing memory ‎through urban spaces? And What are the learned lessons from the German experience?‎ The study tries to answer those questions. Via an inductive ‎analytical ‎methodology ‎which ‎moves from the gap of knowledge and from a particular situation ‎in Egypt, to study the German ‎experience in renationalizing the concept of memory through urban spaces.‎ ‎ Within the scope of the study, exploring Egypt prevailing narratives and the inherited ‎concepts which influenced the national memory is essential. Moreover, the research develops ‎analytical political psychosocial model that could help reading memories in urban spaces, ‎memory’s actors, and memory influences. To validate this model, case studies are analysed in ‎light of the concluded aspects. Consequently, the expected result is to infer broad general ‎learned ‎lessons for the Egyptian case. ‎ Research findings and conclusions answer the research questions, interpret literature ‎review, recommend some guide points to three target groups: first, practice field; to encourage ‎designers to value the national and collective memories when designing urban spaces. Second, to ‎ask policymakers to take the public participation into consideration, when taking decisions related to urban ‎development. Third, the thesis recommends future researches of urban memory that connect ‎theoretical information with the practice field. ‎ Finally, enhancing the memory-work in relation to the national narrative, conveying a meaningful message, when ‎designing urban spaces could encourage citizens to learn, to interact, and to dissolve boundaries ‎between the competing narratives in post-conflict societies.‎ KW - Erinnerung KW - Denkmal KW - Kulturerbe KW - Ägypten KW - Designing Urban National Memory KW - Reading Urban National Memory KW - Prevailing/ Competing Narratives KW - Post-Conflict society KW - Learned Lessons Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191212-40489 ER - TY - THES A1 - Tasch, Alexander T1 - Reaktive Cu-Fe-Al-Mn-Oxidkeramiken für die Sauerstoffseparation aus der Luft N2 - Die Gase Sauerstoff und Stickstoff werden für eine Vielzahl an technischen, industriellen, biologischen und medizinischen Einsatzzwecken benötigt. So liegen Anwendungsgebiete dieser Gase neben der klassischen metallverarbeitenden und der chemischen Industrie bei Sauerstoff vor allem in der Medizin, Verbrennungs- und Kläranlagenoptimierung sowie der Fischzucht und bei Stickstoff als Schutz- beziehungsweise Inertgas in der Kunststoffindustrie, der Luft- und Raumfahrt sowie dem Brandschutz. Die Bereitstellung der Gase Sauerstoff und Stickstoff wird nahezu ausschließlich durch die Abtrennung aus der Umgebungsluft realisiert, welche aus ca. 78 Vol.-% Stickstoff, 21 Vol.-% Sauerstoff und 1 Vol.-% Spurengasen (Ar, CO2, Ne, He, ...) besteht. Am Markt etablierte Verfahren der Luftzerlegung sind das Linde-, das PSA- (pressure swing adsorption/Druckwechseladsorption) oder verschiedene Membran-Verfahren. Hierdurch werden die benötigten Gase entweder direkt vor Ort beim Verbraucher erzeugt (PSA- und Polymer-Membranverfahren: geringe Reinheiten) oder zentral in großen Anlagen hergestellt (Linde-Verfahren: hohe Reinheiten) und anschließend zum Verbraucher in Form von Flaschen- oder Tankgasen geliefert (Tansportkosten). Für kleinere Verbraucher mit hohen Ansprüchen an die Reinheit des benötigten Sauerstoffs beziehungsweise Stickstoffs ergibt sich nur die Möglichkeit, die Gase als kostenintensive Transportgase zentraler Gaseversorger zu beziehen und sich somit in eine Abhängigkeit (Lieferverträge, Flaschen-/Tankmieten, ...) zu diesen zu begeben sowie eine eigene Lagerhaltung für die benötigten Gase (Mehraufwand, Lagerkosten, Platzbedarf) zu betreiben. Ziel dieser Arbeit ist es, keramische Material-Systeme auf Basis chemischer Hochtemperatur-Reaktionen als Reaktive Oxidkeramiken zu entwickeln und diese hinsichtlich eines möglichen Einsatzes für die Sauerstoffseparation in neuartigen Luftzerlegungsanlagen zu untersuchen. Derartige Anlagen sollen in ihrem Prinzip an die regenerative Sauerstoffseparation angelehnt sein und in ihren Reaktoren die Reaktiven Oxidkeramiken als Festbett-Material abwechselnd mit Luft be- und Vakuum oder O2-armen Atmosphären entladen. Die Verwendung Reaktiver Oxidkeramiken, welche im Vergleich zu den bisherigen Materialien höhere Sauerstoffaustauschmengen und -raten bei gleichzeitig hoher Lebensdauer und Korrosionsbeständigkeit sowie relativ einfacher Handhabe aufweisen würden, soll ein Schritt in Richtung einer effizienten alternativen Luftzerlegungstechnologie sein. Mit den Reaktiven Oxidkeramiken in einer Luftzerlegungsanlage sollte es im besten Fall möglich sein, in kleinen Anlagen sehr reinen Sauerstoff und zugleich sauerstofffreies Inertgas zu erzeugen sowie eine Sauerstoffan- oder -abreicherung von Luft, Prozess- oder Abgasen zu generieren. Somit besäße eine solche, auf Reaktiven Oxidkeramiken basierende Technologie sehr weit gefächerte Einsatzgebiete und demzufolge ein enormes wirtschaftliches Potential. KW - Luftzerlegung KW - Sauerstoff KW - Stickstoff KW - Inertgas KW - Oxidkeramik KW - Sauerstoffseparation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191209-40414 ER - TY - THES A1 - Hossain, Md Naim T1 - Isogeometric analysis based on Geometry Independent Field approximaTion (GIFT) and Polynomial Splines over Hierarchical T-meshes N2 - This thesis addresses an adaptive higher-order method based on a Geometry Independent Field approximatTion(GIFT) of polynomial/rationals plines over hierarchical T-meshes(PHT/RHT-splines). In isogeometric analysis, basis functions used for constructing geometric models in computer-aided design(CAD) are also employed to discretize the partial differential equations(PDEs) for numerical analysis. Non-uniform rational B-Splines(NURBS) are the most commonly used basis functions in CAD. However, they may not be ideal for numerical analysis where local refinement is required. The alternative method GIFT deploys different splines for geometry and numerical analysis. NURBS are utilized for the geometry representation, while for the field solution, PHT/RHT-splines are used. PHT-splines not only inherit the useful properties of B-splines and NURBS, but also possess the capabilities of local refinement and hierarchical structure. The smooth basis function properties of PHT-splines make them suitable for analysis purposes. While most problems considered in isogeometric analysis can be solved efficiently when the solution is smooth, many non-trivial problems have rough solutions. For example, this can be caused by the presence of re-entrant corners in the domain. For such problems, a tensor-product basis (as in the case of NURBS) is less suitable for resolving the singularities that appear since refinement propagates throughout the computational domain. Hierarchical bases and local refinement (as in the case of PHT-splines) allow for a more efficient way to resolve these singularities by adding more degrees of freedom where they are necessary. In order to drive the adaptive refinement, an efficient recovery-based error estimator is proposed in this thesis. The estimator produces a recovery solution which is a more accurate approximation than the computed numerical solution. Several two- and three-dimensional numerical investigations with PHT-splines of higher order and continuity prove that the proposed method is capable of obtaining results with higher accuracy, better convergence, fewer degrees of freedom and less computational cost than NURBS for smooth solution problems. The adaptive GIFT method utilizing PHT-splines with the recovery-based error estimator is used for solutions with discontinuities or singularities where adaptive local refinement in particular domains of interest achieves higher accuracy with fewer degrees of freedom. This method also proves that it can handle complicated multi-patch domains for two- and three-dimensional problems outperforming uniform refinement in terms of degrees of freedom and computational cost. T2 - Die isogeometrische Analysis basierend auf der geometrieunabhängigen Feldnäherung (GIFT)und polynomialen Splines über hierarchischen T-Netzen KW - Finite-Elemente-Methode KW - Isogeometrc Analysis KW - Geometry Independent Field Approximation KW - Polynomial Splines over Hierarchical T-meshes KW - Recovery Based Error Estimator Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191129-40376 ER - TY - CHAP A1 - Abrahamczyk, Lars A1 - Schwarz, Jochen T1 - Forecast Engineering: From Past Design to Future Decision 2018 N2 - Institute of Structural Engineering, Institute of Structural Mechanics, as well as Institute for Computing, Mathematics and Physics in Civil Engineering at the faculty of civil engineering at the Bauhaus-Universität Weimar presented special topics of structural engineering to highlight the broad spectrum of civil engineering in the field of modeling and simulation. The summer course sought to impart knowledge and to combine research with a practical context, through a challenging and demanding series of lectures, seminars and project work. Participating students were enabled to deal with advanced methods and its practical application. The extraordinary format of the interdisciplinary summer school offers the opportunity to study advanced developments of numerical methods and sophisticated modelling techniques in different disciplines of civil engineering for foreign and domestic students, which go far beyond traditional graduate courses. The proceedings at hand are the result from the Bauhaus Summer School course: Forecast Engineering held at the Bauhaus-Universität Weimar, 2018. It summarizes the results of the conducted project work, provides the abstracts/papers of the contributions by the participants, as well as impressions from the accompanying programme and organized cultural activities. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 000 KW - Proceedings KW - Ingenieurbau KW - Ingenieurwissenschaften KW - Sommerkurs KW - Structural Engineering KW - proceedings KW - summer school Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191126-40364 ER -