TY - INPR A1 - Kavrakov, Igor A1 - Argentini, Tommaso A1 - Omarini, Simone A1 - Rocchi, Daniele A1 - Morgenthal, Guido T1 - Determination of complex aerodynamic admittance of bridge decks under deterministic gusts using the Vortex Particle Method N2 - Long-span bridges are prone to wind-induced vibrations. Therefore, a reliable representation of the aerodynamic forces acting on a bridge deck is of a major significance for the design of such structures. This paper presents a systematic study of the two-dimensional (2D) fluid-structure interaction of a bridge deck under smooth and turbulent wind conditions. Aerodynamic forces are modeled by two approaches: a computational fluid dynamics (CFD) model and six semi-analytical models. The vortex particle method is utilized for the CFD model and the free-stream turbulence is introduced by seeding vortex particles upstream of the deck with prescribed spectral characteristics. The employed semi-analytical models are based on the quasi-steady and linear unsteady assumptions and aerodynamic coefficients obtained from CFD analyses. The underlying assumptions of the semi-analytical aerodynamic models are used to interpret the results of buffeting forces and aeroelastic response due to a free-stream turbulence in comparison with the CFD model. Extensive discussions are provided to analyze the effect of linear fluid memory and quasi-steady nonlinearity from a CFD perspective. The outcome of the analyses indicates that the fluid memory is a governing effect in the buffeting forces and aeroelastic response, while the effect of the nonlinearity is overestimated by the quasi-steady models. Finally, flutter analyses are performed and the obtained critical velocities are further compared with wind tunnel results, followed by a brief examination of the post-flutter behavior. The results of this study provide a deeper understanding of the extent of which the applied models are able to replicate the physical processes for fluid-structure interaction phenomena in bridge aerodynamics and aeroelasticity. KW - Bridge KW - Aerodynamik KW - Ingenieurwissenschaften KW - Aerodynamic admittance KW - Computational fluid dynamics KW - Vortex particle method KW - Buffeting KW - Long-span bridges Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200206-40883 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/pii/S0167610519305719?via%3Dihub, which has been published in final form at https://doi.org/10.1016/j.jweia.2019.103971 ER - TY - THES A1 - Elrasoul, Riham T1 - Designing Urban National Memory N2 - The study of memory, architecture, and urban space has been the interest ‎of ‎researchers ‎from the diverse fields around the world due to, the significance of dealing ‎with ‎memories ‎especially after the tragedy of the Second World War. Nations in Europe has chosen ‎not to ‎neglect ‎their past, moreover, overcoming it by strengthening the national identity. An ‎approach was clear in ‎the literature, art, further in the way of rebuilding their cities; that mainly ‎has reflected on the ‎value of urban spaces and their role in narrating the country’s national ‎memory. Thanks to this ‎approach, which has supported the post-war European nations to invite ‎to an act of ‎ forgiveness rather than to forget. ‎ On the contrary, memory, in relation to architecture is a form of knowledge has been ‎neglected in Egypt, especially during the previous decades after the declaration of independence ‎from the colonial power, and since 1952 revolution. Recently, a rising debate about Egypt ‎national history and the need to renationalize the Egyptian historical consciousness has rapidly ‎grown up, due to the political transformation has occurred because of the 25th uprising, 2011, ‎which unveiled the power of public spaces in constituting the nation thoughts, especially Tahrir ‎square.‎ At the same time, this has unveiled the results of neglecting the past instead of overcoming it; unveiled a present carries the danger of conflict and repeating previous mistakes. Researchers, historians, politicians, governmental organization, have ‎worked in the purpose of revisiting the historical information, and have tried to document the ‎current transformation of the 25th uprising. There was a public demand for redesigning Tahrir square to reflect the ‎memory of the uprising as a symbol of the power of the public. However, after eight years, those ‎memories have faded as if the 25th uprising has never happened. ‎ Those circumstances are very relevant to the gap between urban design and the art of ‎memory-work, in the scientific field. Few studies in Egypt conducted the concept of memory in ‎relation to urban spaces, however, the matter requires more attention, to associate the need for renationalizing Egypt ‎memory, with viewing urban space as a mean of narrating the country’s national memory and ‎reflecting the citizens' current thoughts, as a try of nearing the distances between ‎competing ‎narratives. Therefore, the research aims at developing a methodological framework that should ‎contribute to renationalizing memory through urban space. Further, benefiting from the German experience by investigating lessons to learn. That is based on the hypothesis that, although there is no fixed formula for all countries to renationalize the historical ‎consciousness of memory through urban spaces, lessons to be learned from Germany experience ‎could be a driving dimension when designing Egyptian urban spaces with a concept of memory ‎as an essential factor. To guide the validity of the study’s hypothesis, a set of research questions are thus ‎formulated: Starting from why memory is an essential factor when designing urban spaces? ‎Regarding Egypt national memory, how it was constituted through history and how to read its ‎representation on urban spaces? Also, the study quests the means of nationalizing memory ‎through urban spaces? And What are the learned lessons from the German experience?‎ The study tries to answer those questions. Via an inductive ‎analytical ‎methodology ‎which ‎moves from the gap of knowledge and from a particular situation ‎in Egypt, to study the German ‎experience in renationalizing the concept of memory through urban spaces.‎ ‎ Within the scope of the study, exploring Egypt prevailing narratives and the inherited ‎concepts which influenced the national memory is essential. Moreover, the research develops ‎analytical political psychosocial model that could help reading memories in urban spaces, ‎memory’s actors, and memory influences. To validate this model, case studies are analysed in ‎light of the concluded aspects. Consequently, the expected result is to infer broad general ‎learned ‎lessons for the Egyptian case. ‎ Research findings and conclusions answer the research questions, interpret literature ‎review, recommend some guide points to three target groups: first, practice field; to encourage ‎designers to value the national and collective memories when designing urban spaces. Second, to ‎ask policymakers to take the public participation into consideration, when taking decisions related to urban ‎development. Third, the thesis recommends future researches of urban memory that connect ‎theoretical information with the practice field. ‎ Finally, enhancing the memory-work in relation to the national narrative, conveying a meaningful message, when ‎designing urban spaces could encourage citizens to learn, to interact, and to dissolve boundaries ‎between the competing narratives in post-conflict societies.‎ KW - Erinnerung KW - Denkmal KW - Kulturerbe KW - Ägypten KW - Designing Urban National Memory KW - Reading Urban National Memory KW - Prevailing/ Competing Narratives KW - Post-Conflict society KW - Learned Lessons Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191212-40489 ER - TY - JOUR A1 - Vollmer, Lisa T1 - Der Gentrifizierungsbegriff in wohnungspolitischen Protesten. Kommentar zu Neil Smiths „Für eine Theorie der Gentrifizierung: ‚Zurück in die Stadt‘ als Bewegung des Kapitals, nicht der Menschen“ (2019 [1979]) JF - sub\urban. zeitschrift für kritische stadtforschung N2 - Seit 50 Jahren wird über Erklärungsansätze für Gentrifizierung gestritten. Sehr viel länger schon wandert anlagesuchendes Kapital von einem Ort zum anderen und hinterlässt dabei Investitionsruinen einerseits und Menschen, die durch Verdrängung ihr Zuhause verlieren, andererseits. Sehr viel kürzer erst wird der Begriff Gentrifizierung hier und da von sozialen Bewegungen aufgegriffen, die sich mit letzterem Phänomen auseinandersetzen. In diesem Beitrag soll es nicht um die wissenschaftliche Debatte um Erklärungsansätze für Gentrifizierung und auch nicht um die wissenschaftliche Relevanz des Begriffes gehen, sondern um seine Rolle und Funktion in sozialen Bewegungen. KW - Soziale Bewegung KW - Gentrifizierung KW - Wohnen KW - OA-Publikationsfonds2019 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200122-40643 UR - https://zeitschrift-suburban.de/sys/index.php/suburban/article/view/493/740 VL - 2019 IS - Band 7, Heft 3 SP - 113 EP - 118 ER - TY - THES A1 - Hutfless, Cornelius T1 - Der Einfluss kommunaler Planung auf die Gestaltung von Neubauvorhaben am Beispiel der Weimarer Innenstadt N2 - Die massive Neubautätigkeit in Deutschland hat die Diskussion um Baukultur wieder verstärkt angestoßen. Dabei wird der Einfluss der kommunalen Planung auf die Baugestaltung sowohl in der Öffentlichkeit als auch der Fachliteratur nur unzureichend thematisiert. Die vorliegende Arbeit von Cornelius Hutfless untersucht die Thematik am konkreten Beispiel der Weimarer Innenstadt. Hierzu wurden die neun formellen und informellen Instrumente analysiert und bewertet, mit denen die kommunale Planung in Weimar seit dem Jahr 1990 unmittelbaren Einfluss auf die Baugestaltung von Neubauprojekten genommen hat: Bebauungspläne, der Denkmalschutz, Sanierungssatzungen, Gestaltungssatzungen, Wettbewerbe, der Gestaltungsbeirat, die Bauberatung, Fachkonzepte und die Öffentlichkeitsbeteiligung. Methodisch kamen die Quellenanalyse, die Fallanalyse und die Stärken-Schwächen-Analyse zum Einsatz. Die Recherchearbeit wurde durch sechs leitfadengestützte Expert*inneninterviews mit Schlüsselpersonen der Weimarer Baugestaltung ergänzt. Dieser Forschungsansatz veranschaulicht den Einfluss kommunaler Planung auf die Gestaltung von Neubauvorhaben erstmalig am Fallbeispiel einer einzelnen deutschen Stadt, indem alle angewendeten Instrumente analysiert wurden. Für Forscher*innen ermöglicht der Bezug auf ein konkretes Untersuchungsgebiet einen praxisnahen Zugang zum Thema Baugestaltung. Stadtplaner*innen veranschaulicht das Beispiel Weimar außerdem, wie umfangreich und restriktiv die kommunalen Möglichkeiten sind, auf die Baugestaltung einzuwirken. Vorbildlich im Sinne einer konsequenten Strategie der Baugestaltung sind in Weimar zum einen die strengen Festsetzungen in den Bebauungsplänen des Untersuchungsgebietes, deren Umsetzung durch die Einsetzung von Baubeiräten gesichert wird. Zum anderen ist der kommunalpolitische Rückhalt ein grundlegender Erfolgsfaktor, der u. a. den Empfehlungen des Gestaltungsbeirates Nachdruck verleiht. Zudem verfügt Weimar über eine umfangreiche Denkmalausweisung. Durch die umfassende Nutzung und Kombination der Instrumente, hat die kommunale Planung in Weimar erfolgreich einen Rahmen geschaffen, der baugestalterische Standards gewährleistet. Der Charakter der Weimarer Innenstadt konnte erhalten werden, obwohl moderne Neubauentwicklungen zugelassen wurden. Das Beispiel Weimar zeigt also, dass Baugestaltungsqualität wesentlich von dem klaren Anspruch einer Kommune nach Prozess- und Verfahrensqualität abhängt. Verbesserungswürdig ist in Weimar hingegen die Öffentlichkeitsbeteiligung bei Gestaltungsfragen. Schon vor der Schaffung planungsrechtlicher Tatsachen sollte zukünftig die Öffentlichkeit umfangreicher in Baugestaltungsprozesse eingebunden und dafür die Möglichkeiten ergänzender, informeller Verfahren ausgeschöpft werden. Nur dann ist eine restriktive Stadtgestaltungspolitik, im Sinne der Wahrung öffentlicher Interessen ganzheitlich positiv zu bewerten. Ausgezeichnet mit dem Hochschulpreis der Bauhaus-Universität Weimar 2018 T3 - IfEU.OPEN - 2 KW - Weimar KW - Kommunalplanung KW - Architektur KW - Bebauungsplan KW - Denkmalpflege KW - Baugestaltung KW - Baukultur KW - Sanierungssatzung KW - Gestaltungssatzung KW - Wettbewerbswesen KW - Gestaltungsbeirat KW - Bauberatung KW - Fachkonzept KW - Öffentlichkeitsbeteiligung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200116-40639 N1 - Ausgezeichnet mit dem Hochschulpreis der Bauhaus-Universität Weimar 2018 ER - TY - THES A1 - ZHANG, CHAO T1 - Crack Identification using Dynamic Extended Finite Element Method and Thermal Conductivity Engineering for Nanomaterials N2 - Identification of flaws in structures is a critical element in the management of maintenance and quality assurance processes in engineering. Nondestructive testing (NDT) techniques based on a wide range of physical principles have been developed and are used in common practice for structural health monitoring. However, basic NDT techniques are usually limited in their ability to provide the accurate information on locations, dimensions and shapes of flaws. One alternative to extract additional information from the results of NDT is to append it with a computational model that provides detailed analysis of the physical process involved and enables the accurate identification of the flaw parameters. The aim here is to develop the strategies to uniquely identify cracks in two-dimensional 2D) structures under dynamic loadings. A local NDT technique combined eXtended Finite Element Method (XFEM) with dynamic loading in order to identify the cracks in the structures quickly and accurately is developed in this dissertation. The Newmark-b time integration method with Rayleigh damping is used for the time integration. We apply Nelder-Mead (NM)and Quasi-Newton (QN) methods for identifying the crack tip in plate. The inverse problem is solved iteratively, in which XFEM is used for solving the forward problem in each iteration. For a timeharmonic excitation with a single frequency and a short-duration signal measured along part of the external boundary, the crack is detected through the solution of an inverse time-dependent problem. Compared to the static load, we show that the dynamic loads are more effective for crack detection problems. Moreover, we tested different dynamic loads and find that NM method works more efficient under the harmonic load than the pounding load while the QN method achieves almost the same results for both load types. A global strategy, Multilevel Coordinate Search (MCS) with XFEM (XFEM-MCS) methodology under the dynamic electric load, to detect multiple cracks in 2D piezoelectric plates is proposed in this dissertation. The Newmark-b method is employed for the time integration and in each iteration the forward problem is solved by XFEM for various cracks. The objective functional is minimized by using a global search algorithm MCS. The test problems show that the XFEM-MCS algorithm under the dynamic electric load can be effectively employed for multiple cracks detection in piezoelectric materials, and it proves to be robust in identifying defects in piezoelectric structures. Fiber-reinforced composites (FRCs) are extensively applied in practical engineering since they have high stiffness and strength. Experiments reveal a so-called interphase zone, i.e. the space between the outside interface of the fiber and the inside interface of the matrix. The interphase strength between the fiber and the matrix strongly affects the mechanical properties as a result of the large ratio of interface/volume. For the purpose of understanding the mechanical properties of FRCs with functionally graded interphase (FGI), a closed-form expression of the interface strength between a fiber and a matrix is obtained in this dissertation using a continuum modeling approach according to the ver derWaals (vdW) forces. Based on the interatomic potential, we develop a new modified nonlinear cohesive law, which is applied to study the interface delamination of FRCs with FGI under different loadings. The analytical solutions show that the delamination behavior strongly depends on the interphase thickness, the fiber radius, the Young’s moduli and Poisson’s ratios of the fiber and the matrix. Thermal conductivity is the property of a material to conduct heat. With the development and deep research of 2D materials, especially graphene and molybdenum disulfide (MoS2), the thermal conductivity of 2D materials attracts wide attentions. The thermal conductivity of graphene nanoribbons (GNRs) is found to appear a tendency of decreasing under tensile strain by classical molecular dynamics (MD) simulations. Hence, the strain effects of graphene can play a key role in the continuous tunability and applicability of its thermal conductivity property at nanoscale, and the dissipation of thermal conductivity is an obstacle for the applications of thermal management. Up to now, the thermal conductivity of graphene under shear deformation has not been investigated yet. From a practical point of view, good thermal managements of GNRs have significantly potential applications of future GNR-based thermal nanodevices, which can greatly improve performances of the nanosized devices due to heat dissipations. Meanwhile, graphene is a thin membrane structure, it is also important to understand the wrinkling behavior under shear deformation. MoS2 exists in the stable semiconducting 1H phase (1H-MoS2) while the metallic 1T phase (1T-MoS2) is unstable at ambient conditions. As it’s well known that much attention has been focused on studying the nonlinear optical properties of the 1H-MoS2. In a very recent research, the 1T-type monolayer crystals of TMDCs, MX2 (MoS2, WS2 ...) was reported having an intrinsic in-plane negative Poisson’s ratio. Luckily, nearly at the same time, unprecedented long-term (>3months) air stability of the 1T-MoS2 can be achieved by using the donor lithium hydride (LiH). Therefore, it’s very important to study the thermal conductivity of 1T-MoS2. The thermal conductivity of graphene under shear strain is systematically studied in this dissertation by MD simulations. The results show that, in contrast to the dramatic decrease of thermal conductivity of graphene under uniaxial tensile, the thermal conductivity of graphene is not sensitive to the shear strain, and the thermal conductivity decreases only 12-16%. The wrinkle evolves when the shear strain is around 5%-10%, but the thermal conductivity barely changes. The thermal conductivities of single-layer 1H-MoS2(1H-SLMoS2) and single-layer 1T-MoS2 (1T-SLMoS2) with different sample sizes, temperatures and strain rates have been studied systematically in this dissertation. We find that the thermal conductivities of 1H-SLMoS2 and 1T-SLMoS2 in both the armchair and the zigzag directions increase with the increasing of the sample length, while the increase of the width of the sample has minor effect on the thermal conductions of these two structures. The thermal conductivity of 1HSLMoS2 is smaller than that of 1T-SLMoS2 under size effect. Furthermore, the temperature effect results show that the thermal conductivities of both 1H-SLMoS2 and 1T-SLMoS2 decrease with the increasing of the temperature. The thermal conductivities of 1HSLMoS2 and 1T-SLMoS2 are nearly the same (difference <6%) in both of the chiral orientations under corresponding temperatures, especially in the armchair direction (difference <2.8%). Moreover, we find that the strain effects on the thermal conductivity of 1HSLMoS2 and 1T-SLMoS2 are different. More specifically, the thermal conductivity decreases with the increasing tensile strain rate for 1T-SLMoS2, while fluctuates with the growth of the strain for 1HSLMoS2. Finally, we find that the thermal conductivity of same sized 1H-SLMoS2 is similar with that of the strained 1H-SLMoS2 structure. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2018,6 KW - crack KW - Wärmeleitfähigkeit KW - crack identification KW - thermal conductivity Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190119-38478 ER - TY - JOUR A1 - Gürlebeck, Klaus A1 - Legatiuk, Dmitrii A1 - Nilsson, Henrik A1 - Smarsly, Kay T1 - Conceptual modelling: Towards detecting modelling errors in engineering applications JF - Mathematical Methods in Applied Sciences N2 - Rapid advancements of modern technologies put high demands on mathematical modelling of engineering systems. Typically, systems are no longer “simple” objects, but rather coupled systems involving multiphysics phenomena, the modelling of which involves coupling of models that describe different phenomena. After constructing a mathematical model, it is essential to analyse the correctness of the coupled models and to detect modelling errors compromising the final modelling result. Broadly, there are two classes of modelling errors: (a) errors related to abstract modelling, eg, conceptual errors concerning the coherence of a model as a whole and (b) errors related to concrete modelling or instance modelling, eg, questions of approximation quality and implementation. Instance modelling errors, on the one hand, are relatively well understood. Abstract modelling errors, on the other, are not appropriately addressed by modern modelling methodologies. The aim of this paper is to initiate a discussion on abstract approaches and their usability for mathematical modelling of engineering systems with the goal of making it possible to catch conceptual modelling errors early and automatically by computer assistant tools. To that end, we argue that it is necessary to identify and employ suitable mathematical abstractions to capture an accurate conceptual description of the process of modelling engineering systems. KW - Angewandte Mathematik KW - Angewandte Informatik KW - Ingenieurwissenschaften KW - Modellierung KW - engineering KW - abstraction KW - modelling KW - formal approaches KW - type theory Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200110-40614 UR - https://onlinelibrary.wiley.com/doi/abs/10.1002/mma.5934 SP - 1 EP - 10 ER - TY - JOUR A1 - Noeske, Jannik T1 - Campus Bockenheim Revisited BT - Rezension zu Schardt, Jürgen (2018): Architektur einer bürgerlichen Gesellschaft. Frankfurter Universitäts- und Stadtbauten im Kontext ihrer Geschichte zwischen 1906 und 1956 . Münster: Westfälisches Dampfboot. JF - sub\urban. Zeitschrift für Kritische Stadtforschung N2 - Jürgen Schardt legt eine umfassende Studie zur Architektur der Stadt- und Universitätsbauten in Frankfurt am Main von 1906 bis 1956 vor. Besonderer Schwerpunkt liegt dabei auf den gesellschaftlichen und politischen Rahmenbedingungen der Architekturproduktion und einer kritischen Revision der etablierten Historiografie der Goethe-Universität. Der Autor widmet sich in drei Teilen jeweils dem Kaiserreich und der Gründung der Hochschule im Jahr 1914, der Zeit der Weimarer Republik sowie der Jahre des Aufbaus nach dem Zweiten Weltkrieg. Schardt untersucht die entstandenen Gebäude hinsichtlich schlüssiger Kriterien bürgerlicher Architektur, beleuchtet aber auch andere für die Hochschulgeschichte relevante Rahmenbedingungen. Die lesenswerte Studie verbindet dabei Aspekte der Sozial-, Wissenschafts- und Architekturgeschichte. KW - Frankfurt am Main KW - Architekturtheorie KW - Frankfurt am Main KW - Universitätsgeschichte KW - Herrschaftsarchitektur KW - OA-Publikationsfonds2019 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220112-45583 UR - https://zeitschrift-suburban.de/sys/index.php/suburban/article/view/553 VL - 2019 IS - Band 9, Nr. 3 SP - 144 EP - 150 PB - sub\urban e. V. CY - Berlin ER - TY - THES A1 - Nogueira, Priscilla T1 - Brazilian battlers' housing. Histories of self-production - histories of social rise N2 - Brazilian battlers’ housing discusses the self-production of dwellings in the circumstances of the socioeconomic rise of the so-called Brazilian new middle class, occurred on the first decade of the years 2000. Battlers are a precarious working class of about 100 million people, who have used their recently increased purchase power to informally solve their private housing demands, planning, building and renovating their homes themselves, with limited technical knowledge and almost no access to formal technicians as for example architects. The result is a mode of housing production, which spreads over the territory in micro-local self-initiatives and informal social practices of construction and management. With the support of a controversial manpower, this practice presents all sorts of technical complications, but at the same time expedient ways of affordability and creative spatial solutions for ordinary constructive problems. Such initiatives have consolidated Brazilian informal settlements and peripheral subdivisions, attending a demand poorly responded by the government. This research recognises the benefits of the self-production, but questions the conditions under which it happens and asks if it really collaborates for a true social rise of those who are engaged in it. With an empirical and qualitative approach and taking dwelling construction processes leaded by battlers as main information sources, the academic work responds if and how the socioeconomic rise of the Brazilian battlers has exactly affected the self-production of dwellings. For that, battlers’ self-production of dwellings is analysed and discussed in five main aspects: 1) acquisition of land and real state, 2) building overtime, 3) space and creative power, 4) technical complications and building materials and 5) manpower and know-how. KW - Brazil KW - self-production KW - low middle class KW - social housing KW - Sozialwohnung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190506-38953 ER - TY - THES A1 - Düring, Serjoscha T1 - Between plan and reality: tracing the development dynamics of the Lanzhou New Area - a computational approach N2 - Contemporary planning practice is often criticized as too design-driven with a lack of both quantitative evaluation criteria and employment of models that anticipate the self-organizational forces shaping cities, resulting in significant gaps between plan and reality. This study aims to introduce a modular toolbox prototype for spatial-analysis in data-poor environments. It is proposed to integrate designing, evaluation, and monitoring of urban development into one framework, thus supporting data-driven, on-demand urban design, and planning processes. The proposed framework’s value will exemplarily be tested, focussing on the analysis and simulation of spatiotemporal growth trajectories taking the Lanzhou New Area as a case-study - a large scale new town project that struggles to attract residents and businesses. Conducted analysis suggests that more attention should be given to spatiotemporal development paths to ensure that cities work more efficiently throughout any stage of development. Finally, early hints on general design strategies to achieve this goal are discussed with the assistance of the proposed toolbox. KW - Stadtplanung KW - Geoinformationssystem KW - evidence-based design KW - computational planning KW - network analysis KW - Grasshopper 3D KW - spatial analysis Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191108-40002 ER - TY - THES A1 - Alalade, Muyiwa T1 - An Enhanced Full Waveform Inversion Method for the Structural Analysis of Dams N2 - Since the Industrial Revolution in the 1700s, the high emission of gaseous wastes into the atmosphere from the usage of fossil fuels has caused a general increase in temperatures globally. To combat the environmental imbalance, there is an increase in the demand for renewable energy sources. Dams play a major role in the generation of “green" energy. However, these structures require frequent and strict monitoring to ensure safe and efficient operation. To tackle the challenges faced in the application of convention dam monitoring techniques, this work proposes the inverse analysis of numerical models to identify damaged regions in the dam. Using a dynamic coupled hydro-mechanical Extended Finite Element Method (XFEM) model and a global optimization strategy, damage (crack) in the dam is identified. By employing seismic waves to probe the dam structure, a more detailed information on the distribution of heterogeneous materials and damaged regions are obtained by the application of the Full Waveform Inversion (FWI) method. The FWI is based on a local optimization strategy and thus it is highly dependent on the starting model. A variety of data acquisition setups are investigated, and an optimal setup is proposed. The effect of different starting models and noise in the measured data on the damage identification is considered. Combining the non-dependence of a starting model of the global optimization strategy based dynamic coupled hydro-mechanical XFEM method and the detailed output of the local optimization strategy based FWI method, an enhanced Full Waveform Inversion is proposed for the structural analysis of dams. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2019,1 KW - Talsperre KW - Staumauer KW - Damage identification KW - Inverse analysis KW - Dams KW - Full waveform inversion KW - Wave propagation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190813-39566 ER -