TY - INPR A1 - Koch, Florian T1 - Zwischen Transformation und Globalisierung - Immobilienmarkt und Stadtentwicklung in Warschau T1 - Real estate markets and urban development in Warsaw N2 - Nach der politischen Wende Ende der 1980er/Anfang der 1990er Jahre entwickelte sich in Warschau innerhalb kurzer Zeit ein hoch dynamischer Immobilienmarkt kapitalistischer Prägung, dessen Mechanismen grundlegende Auswirkungen auf die Stadtentwicklung Warschaus haben. Im folgenden Aufsatz werden die wesentlichen Eigenschaften des Büro- und Wohnungsmarkts aufgezeigt. Es werden für jeden Sektor die Funktionsweise, die wesentlichen Akteure der Nachfrage- und Angebotsseite, die Rolle der Institutionen und die räumlichen Konsequenzen dargestellt. KW - Immobilienmarkt KW - Warschau KW - Stadtentwicklung KW - Stadtforschung KW - Wohnungsmarkt KW - Transformation KW - Globalisierung Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7952 ER - TY - INPR A1 - Fischer, Jens A1 - Schwendner, Sascha A1 - Seim, Werner A1 - Engelmann, Iris T1 - Verbindungen mit Nägeln im Holzbau – Die Erforschung und Entwicklung von Konstruktionsregeln N2 - Der Nagel als tragendes Holzverbindungsmittel ist heute gut bekannt. Doch noch vor 100 Jahren war das anders: sein statisch konstruktiver Gebrauch war verboten. Das änderte sich mit Beginn dessen Erforschung Ende der 1920er Jahre. Seit 1933 ist der Nagel Bestandteil der deutschen Regelwerke und findet seitdem breite Verwendung. Über weite Teile des 20. Jahrhunderts diente er in Not- und Sparkonstruktionen wie Brett- und Bohlenbindern als hocheffizientes Verbindungsmittel der Wahl. Diese materialsparenden Tragwerke waren bei der periodisch im-mer wiederkehrenden Ressourcenknappheit sehr gefragt und sind ein wichtiger Bestandteil der Konstruktionsgeschichte des Holzbaus. In dem folgenden Beitrag wird die Erforschung des Na-geltragverhaltens und die einhergehende fortlaufende Normierung behandelt. Die Errungen-schaften einzelner Forschungsvorhaben werden vorgestellt. Anhand eines Zeitstrahls werden Zusammenhänge zwischen Forschung und Normung gezeigt. Tabellen und Grafiken verdeutli-chen die Änderungen innerhalb der Normen von der ersten DIN 1052 im Jahr 1933 über die erste eigenständige Holzbaunorm in der DDR, der TGL 112-0730, aus 1963 bis zur DIN 1052- 1988. Dabei wird immer Bezug zum derzeitigen Entwurf des Eurocode 5 genommen. Allgemein zeigt sich, dass ein Großteil der heutigen Kenntnisse immer noch auf die Grundlagenforschung der 1930er Jahre zurückgeht. N2 - The nail as a load-bearing timber fastener is well known today. But 100 years ago, it was different: its structural use was not allowed. This changed with the beginning of systematical research at the end of the 1920s. Since 1933, the nail has been part of the German regulations and has been widely used ever since. For much of the 20th century, it served as the highly efficient fastener of choice especially in roof structures such as board and plank trusses. These material-saving load-bearing structural elements were always in demand due to the periodically recurring scarcity of material resources and are an important part in con-struction history. The following article deals with the research of the load-bearing behaviour of nails and the standardisation that has constantly accompanied it. The achievements of individual research projects are presented. A timeline shows the connections between research and standardisation. Tables and graphics illustrate the changes within the standards from the first DIN 1052 in 1933 to the first independent timber construction standard in the DDR, TGL 112-0730, from 1963 to DIN 1052-1988. Reference is al-ways made to the Eurocode 5 valid today. In general, it can be seen that a large part of today's knowledge still goes back to the basic research of the 1930s. KW - Ingenieurholzbau KW - Holz-Holz-Verbindungen KW - Nagel KW - Experimentelle Untersuchungen KW - DIN 1052 KW - TGL Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48893 N1 - This is the pre-peer reviewed version. ER - TY - INPR A1 - Vogel, Albert A1 - Benz, Alexander A1 - Völker, Conrad T1 - Untersuchung des Wärmeübergangs von zyklisch beanspruchten Betonzylindern N2 - Wiederkehrende Belastungen, wie sie beispielsweise an Brücken oder Windenergieanlagen auftreten, können innerhalb der Nutzungsdauer solcher Bauwerke bis zu 1.000.000.000 Lastwechsel erreichen. Um das dadurch eintretende Ermüdungsverhalten von Beton zu untersuchen, werden diese zyklischen Beanspruchungen in mechanischen Versuchen mit Prüfzylindern nachgestellt. Damit Versuche mit solch hohen Lastwechselzahlen in akzeptablen Zeitdauern durchgeführt werden können, wird die Belastungsfrequenz erhöht. Als Folge dieser erhöhten Belas-tungsfrequenz erwärmen sich allerdings die Betonprobekörper, was zu einem früheren, unrealistischen Versagenszeitpunkt führen kann, weshalb die Erwärmung begrenzt werden muss. Um die Wärmefreisetzung in der Probe zu untersuchen, wurden Versuche und Simulationen durchgeführt. Im Beitrag wird die analytische und messtechnische Analyse des Wärmeübergangs an erwärmten Betonzylindern vorgestellt. Resultierend daraus wird eine Möglichkeit zur Reduktion der Erwärmung an zyklisch beanspruchten Betonzylindern vorgestellt. N2 - Periodic load cycles, such as those that occur on bridges or wind turbines, are of great importance for dynamic long-term considerations of concrete. Within the life span of such structures, up to 1,000,000,000 load changes can be expected. To determine the fatigue strength, the resistance to periodic loads can be determined in a short time in laboratory tests by increasing the load frequency. As a result of this increased load frequency, however, the concrete test specimens heat up, which can lead to an earlier, unrealistic time of failure, which is why the heating must be limited. Therefore, tests and simulations were carried out to investigate the heat release in the sample. In this article, the analytical analysis and measurements of the heat release of heated concrete cylinders are presented. As a conclusion, a possibility of reducing the temperature of dynamically stressed concrete cylinders is introduced. KW - Zyklische Beanspruchung KW - Wärmeübergang KW - Wärmeübergangskoeffizient KW - Dissipation KW - Wärmeübergangskoeffizient an Zylinder KW - heat transfer coefficient for cylinders KW - cyclic load Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200619-41813 N1 - This is the pre-peer reviewed version of the following article: https://onlinelibrary.wiley.com/doi/abs/10.1002/bapi.202000004, which has been published in final form at https://doi.org/10.1002/bapi.202000004 VL - 2020 IS - Volume 42, Issue 3 SP - 131 EP - 138 PB - John Wiley and Sons ER - TY - INPR A1 - Langlotz, Tobias A1 - Bimber, Oliver T1 - Unsynchronized 4D Barcodes N2 - We present a novel technique for optical data transfer between public displays and mobile devices based on unsynchronized 4D barcodes. We assume that no direct (electromagnetic or other) connection between the devices can exist. Time-multiplexed, 2D color barcodes are displayed on screens and recorded with camera equipped mobile phones. This allows to transmit information optically between both devices. Our approach maximizes the data throughput and the robustness of the barcode recognition, while no immediate synchronization exists. Although the transfer rate is much smaller than it can be achieved with electromagnetic techniques (e.g., Bluetooth or WiFi), we envision to apply such a technique wherever no direct connection is available. 4D barcodes can, for instance, be integrated into public web-pages, movie sequences or advertisement presentations, and they encode and transmit more information than possible with single 2D or 3D barcodes. KW - Maschinelles Sehen KW - Computer Vision KW - Barcodes Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8531 ER - TY - INPR A1 - Grundhöfer, Anselm A1 - Bimber, Oliver T1 - Real-Time Adaptive Radiometric Compensation N2 - Recent radiometric compensation techniques make it possible to project images onto colored and textured surfaces. This is realized with projector-camera systems by scanning the projection surface on a per-pixel basis. With the captured information, a compensation image is calculated that neutralizes geometric distortions and color blending caused by the underlying surface. As a result, the brightness and the contrast of the input image is reduced compared to a conventional projection onto a white canvas. If the input image is not manipulated in its intensities, the compensation image can contain values that are outside the dynamic range of the projector. They will lead to clipping errors and to visible artifacts on the surface. In this article, we present a novel algorithm that dynamically adjusts the content of the input images before radiometric compensation is carried out. This reduces the perceived visual artifacts while simultaneously preserving a maximum of luminance and contrast. The algorithm is implemented entirely on the GPU and is the first of its kind to run in real-time. KW - Maschinelles Sehen KW - CGI KW - Bildbasiertes Rendering KW - Display KW - Projektionsverfahren KW - Radiometrische Kompensation KW - Projektion KW - Projekor-Kamera System KW - Bildkorrektur KW - Visuelle Wahrnehmung KW - radiometric compensation KW - projection KW - projector-camera systems KW - image correction KW - visual perception Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7848 ER - TY - INPR A1 - Abbas, Tajammal A1 - Kavrakov, Igor A1 - Morgenthal, Guido A1 - Lahmer, Tom T1 - Prediction of aeroelastic response of bridge decks using artificial neural networks N2 - The assessment of wind-induced vibrations is considered vital for the design of long-span bridges. The aim of this research is to develop a methodological framework for robust and efficient prediction strategies for complex aerodynamic phenomena using hybrid models that employ numerical analyses as well as meta-models. Here, an approach to predict motion-induced aerodynamic forces is developed using artificial neural network (ANN). The ANN is implemented in the classical formulation and trained with a comprehensive dataset which is obtained from computational fluid dynamics forced vibration simulations. The input to the ANN is the response time histories of a bridge section, whereas the output is the motion-induced forces. The developed ANN has been tested for training and test data of different cross section geometries which provide promising predictions. The prediction is also performed for an ambient response input with multiple frequencies. Moreover, the trained ANN for aerodynamic forcing is coupled with the structural model to perform fully-coupled fluid--structure interaction analysis to determine the aeroelastic instability limit. The sensitivity of the ANN parameters to the model prediction quality and the efficiency has also been highlighted. The proposed methodology has wide application in the analysis and design of long-span bridges. KW - Aerodynamik KW - Artificial neural network KW - Ingenieurwissenschaften KW - Bridge KW - Bridge aerodynamics KW - Aerodynamic derivatives KW - Motion-induced forces KW - Bridges Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200225-40974 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/abs/pii/S0045794920300018?via%3Dihub, https://doi.org/10.1016/j.compstruc.2020.106198 ER - TY - INPR A1 - Khosravi, Khabat A1 - Sheikh Khozani, Zohreh A1 - Cooper, James R. T1 - Predicting stable gravel-bed river hydraulic geometry: A test of novel, advanced, hybrid data mining algorithms N2 - Accurate prediction of stable alluvial hydraulic geometry, in which erosion and sedimentation are in equilibrium, is one of the most difficult but critical topics in the field of river engineering. Data mining algorithms have been gaining more attention in this field due to their high performance and flexibility. However, an understanding of the potential for these algorithms to provide fast, cheap, and accurate predictions of hydraulic geometry is lacking. This study provides the first quantification of this potential. Using at-a-station field data, predictions of flow depth, water-surface width and longitudinal water surface slope are made using three standalone data mining techniques -, Instance-based Learning (IBK), KStar, Locally Weighted Learning (LWL) - along with four types of novel hybrid algorithms in which the standalone models are trained with Vote, Attribute Selected Classifier (ASC), Regression by Discretization (RBD), and Cross-validation Parameter Selection (CVPS) algorithms (Vote-IBK, Vote-Kstar, Vote-LWL, ASC-IBK, ASC-Kstar, ASC-LWL, RBD-IBK, RBD-Kstar, RBD-LWL, CVPSIBK, CVPS-Kstar, CVPS-LWL). Through a comparison of their predictive performance and a sensitivity analysis of the driving variables, the results reveal: (1) Shield stress was the most effective parameter in the prediction of all geometry dimensions; (2) hybrid models had a higher prediction power than standalone data mining models, empirical equations and traditional machine learning algorithms; (3) Vote-Kstar model had the highest performance in predicting depth and width, and ASC-Kstar in estimating slope, each providing very good prediction performance. Through these algorithms, the hydraulic geometry of any river can potentially be predicted accurately and with ease using just a few, readily available flow and channel parameters. Thus, the results reveal that these models have great potential for use in stable channel design in data poor catchments, especially in developing nations where technical modelling skills and understanding of the hydraulic and sediment processes occurring in the river system may be lacking. KW - Maschinelles Lernen KW - Künstliche Intelligenz KW - Data Mining KW - Hydraulic geometry KW - Gravel-bed rivers Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211004-44998 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/abs/pii/S1364815221002085 ; https://doi.org/10.1016/j.envsoft.2021.105165 VL - 2021 ER - TY - INPR A1 - Radmard Rahmani, Hamid A1 - Könke, Carsten T1 - Passive Control of Tall Buildings Using Distributed Multiple Tuned Mass Dampers N2 - The vibration control of the tall building during earthquake excitations is a challenging task due to their complex seismic behavior. This paper investigates the optimum placement and properties of the Tuned Mass Dampers (TMDs) in tall buildings, which are employed to control the vibrations during earthquakes. An algorithm was developed to spend a limited mass either in a single TMD or in multiple TMDs and distribute them optimally over the height of the building. The Non-dominated Sorting Genetic Algorithm (NSGA – II) method was improved by adding multi-variant genetic operators and utilized to simultaneously study the optimum design parameters of the TMDs and the optimum placement. The results showed that under earthquake excitations with noticeable amplitude in higher modes, distributing TMDs over the height of the building is more effective in mitigating the vibrations compared to the use of a single TMD system. From the optimization, it was observed that the locations of the TMDs were related to the stories corresponding to the maximum modal displacements in the lower modes and the stories corresponding to the maximum modal displacements in the modes which were highly activated by the earthquake excitations. It was also noted that the frequency content of the earthquake has significant influence on the optimum location of the TMDs. KW - Schwingungsdämpfer KW - Hochbau KW - tall buildings KW - passive control KW - genetic algorithm KW - tuned mass dampers Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190311-38597 UR - https://www.researchgate.net/publication/330508976_Seismic_Control_of_Tall_Buildings_Using_Distributed_Multiple_Tuned_Mass_Dampers ER - TY - INPR A1 - Schwendner, Sascha A1 - Fischer, Jens A1 - Seim, Werner A1 - Engelmann, Iris T1 - Nägel im Holzbau – Die Erforschung des Trag- und Verformungsverhaltens N2 - Die Tragfähigkeit von Nägeln und Nagelverbindungen im Holzbau war lange Zeit ausschließlich über Tabellen, die auf experimentellen Untersuchungen basierten, geregelt. In den letzten 100 Jahren untersuchten unterschiedliche Forscher das Last-Verformungsverhalten dieser Verbindungen und entwickelten Modelle, mit denen auf Grundlage von analytischen Gleichungen die Tragfähigkeit und das Verformungsverhalten von Nägeln berechnet werden kann. Die zunächst in Not- und Sparkonstruktion eingesetzten Nägel werden heutzutage vor allem bei Tafelelementen verwendet. Im Bestand finden sich aber auch zahlreiche, teils weit gespannte Fachwerkkonstruktionen. In dem folgenden Beitrag werden die Erforschung und Entwicklung der Tragfähigkeit sowie des Verformungsverhaltens von genagelten Verbindungen detailliert und strukturiert erläutert. Die zugehörigen Meilensteine werden genauer betrachtet. Über unterschiedliche Methoden für die Bestimmung der Tragfähigkeit sowie mechanische Phänomene, die erst nach und nach entdeckt wurden, können in der aktuellen Normung sehr individuelle Verbindungen nachgewiesen und deren Verhalten beschrieben werden. Tabellen und Grafiken verdeutlichen die einzelnen Meilensteine der geschichtlichen Entwicklung und vergleichen konkret die normativen Regelungen seit Beginn der Einführung des Nagels in den Ingenieurholzbau in Deutschland. Hierbei kann gezeigt werden, dass einige Definitionen seit 1933 bis heute noch ihre Gültigkeit behalten. N2 - For a long time, the load-carrying capacity of nails and nail connections in timber structures was regulated only by tables based on experimental investigations. In the last 100 years, different researchers investigated the load-deformation behaviour of these connections and developed models with which the load-carrying capacity and deformation behaviour of nails can be estimated very precisely on the basis of analytical equations. At first used in material saving construction in economical difficult times, nails are nowadays ever-present in modern engineered timber structures. In the following article, the research and development of nail load-carrying capacity and its deformation behaviour will be basically explained, and the milestones will be examined in detail. Using different methods to consider mechanical phenomena, which were only discovered over time, individual connections can be verified in the current standards and their behaviour can be described. Tables and graphics illustrate the milestones of the historical development and specifically compare the normative regulations since the introduction of the nail in engineered timber construction in Germany. Here it can be shown that some definitions since 1933 still retain their relevance today. KW - Ingenieurholzbau KW - Holz-Holz-Verbindungen KW - Nagel KW - Experimentelle Untersuchungen KW - DIN 1052 KW - TGL Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48904 N1 - This is the pre-peer reviewed version. ER - TY - INPR A1 - Mosavi, Amir A1 - Moeini, Iman A1 - Ahmadpour, Mohammad A1 - Alharbi, Naif A1 - E. Gorji, Nima T1 - Modeling the time-dependent characteristics of perovskite solar cells N2 - We proposed two different time-dependent modeling approaches for variation of device characteristics of perovskite solar cells under stress conditions. The first approach follows Sah-Noyce-Shockley (SNS) model based on Shockley–Read–Hall recombination/generation across the depletion width of pn junction and the second approach is based on thermionic emission model for Schottky diodes. The connecting point of these approaches to time variation is the time-dependent defect generation in depletion width (W) of the junction. We have fitted the two models with experimental data reported in the literature to perovskite solar cell and found out that each model has a superior explanation for degradation of device metrics e.g. current density and efficiency by time under stress conditions. Nevertheless, the Sah-Noyce-Shockley model is more reliable than thermionic emission at least for solar cells. KW - Solarzelle KW - Solar KW - Solar cells KW - Modeling KW - Time-dependent KW - Defect generation KW - Perovskite Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180907-37573 N1 - Published in final form at https://doi.org/10.1016/j.solener.2018.05.082. ER -