TY - INPR A1 - Zollmann, Stefanie A1 - Bimber, Oliver T1 - Imperceptible Calibration for Radiometric Compensation N2 - We present a novel multi-step technique for imperceptible geometry and radiometry calibration of projector-camera systems. Our approach can be used to display geometry and color corrected images on non-optimized surfaces at interactive rates while simultaneously performing a series of invisible structured light projections during runtime. It supports disjoint projector-camera configurations, fast and progressive improvements, as well as real-time correction rates of arbitrary graphical content. The calibration is automatically triggered when mis-registrations between camera, projector and surface are detected. KW - Association for Computing Machinery / Special Interest Group on Graphics KW - CGI KW - Maschinelles Sehen KW - unsichtbare Muster Projektion KW - Projektor-Kamera Systeme KW - Kalibrierung KW - Radiometrische Kompensation KW - imperceptible pattern projection KW - projector-camera systems KW - calibration KW - radiometric compensation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8094 ER - TY - THES A1 - Zeh, Rainer T1 - Die Zugfestigkeit bindiger Böden als Kriterium der Rissgefährdung mineralischer Oberflächenabdichtungen T1 - The tensile strength of cohesive soils as cracking criteria of mineral cover linings N2 - Oberflächenabdichtungen von Deponien sind in ihrer langfristigen Funktion häufig durch eine austrocknungsbedingter Rissbildung der mineralischen Dichtungskomponente gefährdet. Als Ursachen gelten insbesondere das standortspezifische Klima mit den stark schwankenden Randbedingungen (Niederschlag, Temperatur), Pflanzen und Tiere sowie auch ein ungeeigneter Systemaufbau. Durch einen Wasserentzug treten Schrumpfungsprozesse in der mineralischen Dichtung auf welche über negative Dehnungen zu Dehnungsbrüchen und damit zu einer Rissbildung führen. Für die Beanspruchbarkeit eines Dichtungsmaterials bei Wasserentzug sind insbesondere dessen Schrumpfverhalten und dessen Zugfestigkeit von Bedeutung. Beide Eigenschaften wurden durch eigens konzipierte Laborversuche beispielhaft an zwei typischen Dichtungsböden untersucht. Die Ergebnisse zeigen eine große Abhängigkeit von der Wasserspannung sowie von der Bodenstruktur. Für die Zugfestigkeit und dem daraus abgeleiteten Dehnungsmodul gilt z. B. jeweils eine eindeutige Zunahme mit Zunahme der Wasserspannungen. Mit Hilfe der Ergebnisse aus den Laborversuchen sowie numerischen Berechnungen des Was-serhaushaltes und der vorherrschenden Spannungen kann eine erste Rissgefährdungsabschätzung für mineralische Dichtungen in Oberflächenabdichtungen abgeleitet und angewandt werden. Weitere Erläuterungen z. B. zu den Eigenschaften und der Teilsättigung bindiger Böden, analytische Zugfestigkeitsberechnungen oder Empfehlungen zum Entwurf und der Herstellung von Oberflächenabdichtungen ergänzen die Arbeit. N2 - The long-term function of cover lining systems of landfills is endangered by desiccation and cracking of the compacted clay liner. The specific climate at the landfill location with its varying conditions (precipitation, temperature), plants and animals or also an inappropriate cover lining system are the causes of these phenomena. Dewatering and desiccation of compacted clay liners produce negative strains and after that strain rupture or cracking. The shrinkage behaviour and the tensile strength of a cover lining material are very important for its capacity. Both characteristics were examined by self-designed laboratory tests which were conducted on two typical cover lining materials. The results show a strong dependency on the suction and on the soil structure. The tensile strength as well as the derived E-modulus increase with increasing suction for example. A first estimation of cracking risk in compacted clay liners of cover lining systems can be derived and used by the presented laboratory test results, numeric calculations of the water balance and the predominant stresses. Further explanations as e. g. the characteristics and unsaturation of cohesive soils, analytic calculations of the tensile strength or recommendations to the design and the production of cover lining systems complete the thesis. KW - Deponiebau KW - Zugfestigkeit KW - Rissbildung KW - Wasserhaushalt KW - Oberflächenabdichtung KW - Teilsättigung KW - landfill cover lining system KW - tensile strength KW - cracking KW - unsaturation KW - water balance Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070522-8692 ER - TY - RPRT A1 - Wetzstein, Gordon A1 - Bimber, Oliver T1 - Radiometric Compensation through Inverse Light Transport N2 - Radiometric compensation techniques allow seamless projections onto complex everyday surfaces. Implemented with projector-camera systems they support the presentation of visual content in situations where projection-optimized screens are not available or not desired - as in museums, historic sites, air-plane cabins, or stage performances. We propose a novel approach that employs the full light transport between a projector and a camera to account for many illumination aspects, such as interreflections, refractions and defocus. Precomputing the inverse light transport in combination with an efficient implementation on the GPU makes the real-time compensation of captured local and global light modulations possible. KW - Association for Computing Machinery / Special Interest Group on Graphics KW - CGI KW - Maschinelles Sehen KW - Projektionssystem KW - radiometrische Kompensation KW - Licht Transport KW - Projector-Camera Systems KW - Radiometric Compensation KW - Inverse Light Transport Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8126 ER - TY - JOUR A1 - Völker, Conrad A1 - Kornadt, Oliver A1 - Ostry, Milan T1 - Temperature reduction due to the application of phase change materials JF - Energy and Buildings N2 - Overheating is a major problem in many modern buildings due to the utilization of lightweight constructions with low heat storing capacity. A possible answer to this problem is the emplacement of phase change materials (PCM), thereby increasing the thermal mass of a building. These materials change their state of aggregation within a defined temperature range. Useful PCM for buildings show a phase transition from solid to liquid and vice versa. The thermal mass of the materials is increased by the latent heat. A modified gypsum plaster and a salt mixture were chosen as two materials for the study of their impact on room temperature reduction. For realistic investigations, test rooms were erected where measurements were carried out under different conditions such as temporary air change, alternate internal heat gains or clouding. The experimental data was finally reproduced by dint of a mathematical model. KW - Raumklima KW - Paraffin KW - Phasenumwandlung KW - Gebäude KW - Überhitzung KW - summer overheating in buildings KW - phase change materials KW - PCM KW - Paraffin KW - salt hydrate KW - numerical simulation KW - mathematical model KW - heat storage Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181025-38166 UR - https://www.sciencedirect.com/science/article/pii/S0378778807002034 N1 - The following article appeared in the journal Energy and Buildings 40 (5) 2008, 937‐944 and may be found at https://doi.org/10.1016/j.enbuild.2007.07.008. IS - 40, 5 SP - 937 EP - 944 ER - TY - THES A1 - Voigt, Pamela T1 - Die Pionierphase des Bauens mit glasfaserverstärkten Kunststoffen (GFK) 1942 bis 1980 T1 - The pioneer phase of building with glass-fibre reinforced plastics (GRP) 1942 to 1980 N2 - Kein anderes Material hat im 19. Jahrhundert das Design und die Architektur beeinflußt, wie die Kunststoffe. Das Feld der Realisationen und der Projekte des gesamten Kunststoffbaus ist dabei aufgrund der unterschiedlichen Kunststoffarten und somit Ausführungen sehr weitläufig. Daher begrenzt sich diese Untersuchung auf die glasfaserverstärkten Kunststoffe (GFK). Die Glasfasern übertragen die auftretenden Kräfte und werden durch das sie umschließende Harz gebunden. Die GFK sind daher bestens für tragende Bauteile geeignet. Die glasfaserverstärkten Kunststoffe durchliefen in den 1940er bis 1970er Jahren eine für einen Baustoff kurze aber sehr ergiebige Pionierphase. Die umfassende Analyse der drei zu unterscheidenden Perioden setzt sich aus der Untersuchung der wirtschaftlichen, politischen, gesellschaftlichen und kulturellen Beeinflussungen zusammen. Circa 260 unterschiedliche Projekte wurden weltweit aus selbsttragenden / tragenden GFK-Bauteilen realisiert. Diese sind ausführlich innerhalb des Kataloges im Anhang aufgelistet. GFK-Bauten waren nicht allein aufgrund des neuen Materials modern, sondern auch aufgrund ihrer freien Formbarkeit, transluzenten Flächen und auffälligen Farben und den flexiblen Nutzungskonzepten entsprechend einer modernen demokratischen Gesellschaft, die aufgeschlossen und optimistisch der Zukunft gegenübersteht. Die Realisationen, die zum Teil bis heute noch genutzt werden, beweisen den hohen Wissensstand der Pioniere. Die von den Pionieren gesuchte GFK-Architektur war eine sehr vielfältige, die sich nicht auf wenige Formenmerkmale zusammenfassen läßt. Das neue Material ermöglichte es den Architekten, ihre Vorstellungen und Träume von Formen, Gehäusen und Bauten zu realisieren. Die Analyse der Vorgänger und der Inspirationsquellen diese Formenvielfalt sind Grundlage einer objektiven Beurteilung dieser Bauten. Architekten und Bauingenieure suchten ideale Einsatzgebiete und Konstruktionsvarianten für den bis dahin assoziationsfreien Baustoff. Die Nutzungskonzepte: Wohnhaus, Zweithaus, Ausstellung, Spielgerät und die Entwicklung von Gebäudeteilen: Gebäudehülle, Überdachung, Fassade werden im Gesamtzusammenhang und nach der optimalen Verwendbarkeit untersucht. Das Wissen über den Verlauf der Pionierphase der GFK, die damals formulierten Gründe für und wider deren Einsatz und der entwickelten Konstruktionen, Verbindungstechniken und Tragwerke kann einem erneuten Einsatz des Baumateriales nur dienlich sein. Anliegen dieser Dissertation ist es, die GFK als einsatzfähige Werkstoffe innerhalb der Architekturlandschaft wieder einen Platz zu geben. Diese Analyse soll verschüttetes Wissen aufdecken, die in den 1970er Jahren entstandenen Vorurteile sichtbar machen und die glasfaserverstärkten Kunststoffe als das darstellen, was sie sind, leistungsfähige Baustoffe für gekrümmte und gefaltete Konstruktionen. N2 - No other material affected the design and the architecture of the 19th century more than the plastics. There is a great variety of different sorts of plastics and therefore as well of architectural projects. That’s why this thesis limits itself to the glass-fibre reinforced plastics (GRP). The glass fibres are bounded by the polyester resin. In this way they transfer the arising forces – therefore the GRP are suitable in the best way for load-bearing construction units. The glass-fibre reinforced plastics went through a very short but productive pioneer phase (1942 to 1980). This is a very short periods for a building material. The comprehensive analysis of the three phases consists of the investigation of the economical, political, social and cultural influences. About 260 different GRP units had been realized world-wide out of self supporting/supporting elements. Those are listed in detail within the catalogue in the appendix. Buildings made of GRP were not alone modern due to the new material, but also due to their free mould ability, translucent facades, remarkable colours and the flexible use, according to an optimistically minded modern democratic society. These projects – some of them are still in use – prove the high developed know-how of the pioneer-constructers. The GRP-pioneers had achieved an enormous variety of forms. The analysis of the predecessors and the Sources of inspiration and the following variety of forms are basis of an objective evaluation of these buildings. Architects and civil engineers searched for ideal operational areas and structural variants for these building material, that until than had been free of associations. The used concepts: House, Second home, Exhibition, Playing equipment and the development of parts of building as Building cover, Roofing, Façade are examined in the general context and following the optimal usefulness. The knowledge about the process of the pioneer phase, the seasons for and against the use of GRP, formulated at that time, and the developed constructions, Connection techniques and structure could be helpful for a renewed use of the GRP. The request of this thesis is to show the GRP as a useful material within architecture. This analysis is to uncover the hidden knowledge, to show the prejudices developed in the 1970s and to present the glass-fibre plastics as an efficient building material for curved and folded constructions. KW - Architektur KW - Glasfaserverstärkter Kunststoff KW - Organische Architektur KW - Phantastische Architektur KW - Experimentelle Architektur KW - Mobile Architektur KW - Bauen mit Kunststoffen KW - Fertighausbau KW - Nachkriegsarchitektur KW - Industrielles Bauen KW - building with plastics KW - prefabricated houses KW - post war architecture KW - industrial building Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070620-8779 ER - TY - JOUR A1 - Unger, Jörg F. A1 - Eckardt, Stefan A1 - Könke, Carsten T1 - Modelling of cohesive crack growth in concrete structures with the extended finite element method JF - Computer Methods in Applied Mechanics and Engineering N2 - Modelling of cohesive crack growth in concrete structures with the extended finite element method KW - Angewandte Mathematik KW - Strukturmechanik Y1 - 2007 SP - 4087 EP - 4100 ER - TY - CHAP A1 - Steinmetzger, Rolf T1 - Prävention durch menschengerechte Arbeitsgestaltung KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8438 ER - TY - CHAP A1 - Steinmetzger, Rolf T1 - 5. Fachtagung Sicherheit auf Baustellen - Inhaltsverzeichnis KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8362 ER - TY - CHAP A1 - Steinberg, Kerstin T1 - Neue Strukturen für die Anforderungen von morgen - der Thüringer Landesbetrieb im Spannungsfeld zwischen Deregulierung und Verantwortung KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8384 ER - TY - CHAP A1 - Seifert, Wolfgang T1 - Systematischer Arbeitsschutz im Baubetrieb - AMS Bau KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8409 ER -