TY - BOOK ED - Hildebrand, Jörg ED - Loose, Tobias ED - Sakkiettibutra, Jens ED - Brand, Marcus T1 - Simulationsforum 2013 - Schweißen und Wärmebehandlung N2 - Das Buch veröffentlicht 22 Fachbeiträge der Konferenz "Simulationsforum 2013 - Schweißen und Wärmebehandlung". KW - Schweißen KW - Wärmebehandlung KW - Simulation KW - Stahl KW - Modellierung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140512-21820 SN - 978-3-00-045902-3 PB - Förderverein Wärmebehandlung und Schweißen e.V. CY - Weimar ER - TY - CHAP A1 - Alda, Sascha A1 - Cremers, Armin B. A1 - Bilek, Jochen T1 - Support of Collaborative Structural Design Processes through the Integration of Peer-to-Peer and Multiagent Architectures N2 - Structural engineering projects are increasingly organized in networked cooperations due to a permanently enlarged competition pressure and a high degree of complexity while performing the concurrent design activities. Software that intends to support such collaborative structural design processes implicates enormous requirements. In the course of our common research work, we analyzed the pros and cons of the application of both the peer-to-peer (University of Bonn) and multiagent architecture style (University of Bochum) within the field of collaborative structural design. In this paper, we join the benefits of both architecture styles in an integrated conceptual approach. We demonstrate the surplus value of the integrated multiagent–peer-to-peer approach by means of an example scenario in which several structural engineers are co-operatively designing the basic structural elements of an arched bridge, applying heterogeneous CAD systems. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Mehragentensystem Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1481 ER - TY - CHAP A1 - Baranski, Jacek A1 - Boron, Jacek T1 - Computer Modeling of the Joints for WGP Construction Systems N2 - Poland is not situated in any seismic region of the earth, however there are still areas were underground mining is being conducted. In these areas, so-called 'paraseismic tremors', are very frequent phenomena. In the situation when a building examination is realized in order to define its safety, it is necessary to make a complete analysis, in which an influence of tremors should be included. To decide if a building is able to carry out any dynamic loads or not, it is necessary to compute its dynamic characteristics, i.e. natural frequencies. It is not possible using any standard techniques. After diagnosis a building in situ by an expert, computer techniques together with specialized software for dynamic, static, and strength analyses become a suitable tool. In this paper a special attention was paid to a typical twelve-store WGP (Wroclaw Great Plate) prefabricated building, concerning special type of joints. During dynamic actions these joints have a decisive influence on building's behavior. Paraseismic tremors are especially dangerous for these buildings and can be the reason of pre-failure states. It can be difficult and very expensive to prepare laboratory investigations of the part of a building or of a separate joint; therefore the computer modeling suitable to investigate behavior of such elements and whole buildings under different kinds of loads was used. KW - Gebäude KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2935 ER - TY - CHAP A1 - Berger, Hans A1 - Graeff-Weinberg, K. T1 - FEM-Detailuntersuchungen an Tragwerken unter Einsatz von pNh-Übergangselementen N2 - Detailuntersuchungen an Tragwerken führen bei FE-Berechnungen immer wieder auf das Problem einer geeigneten Netzgestaltung. Während in weiten Bereichen ein grobes Netz ausreicht, muß an kritischen Stellen ein sehr feines Netz gewählt werden, um gerade dort hinreichend genaue Ergebnisse zu erhalten. Bei der Realisierung lokaler Netzverdichtungen stellt die Gestaltung des Übergangs vom groben zum feinen Netz das Hauptproblem dar. Im Beitrag wird hierzu eine Familie von FE-Übergangselementen vorgestellt, mit denen sich eine voll-kompatible Kopplung von wenigen großen Elementen mit vielen kleinen Elementen bereits über nur eine Stufe erzielen läßt. Diese neu entwickelten sogenannten pNh-Elemente ermöglichen an einer oder mehreren Seiten den Anschluß von N kleineren Elementen (Elementseiten für h-Verfeinerung). Das wird durch N stückweise definierte Ansatzfunktionen an den entsprechenden Seiten erreicht, wobei die Teilung nicht äquidistant sein braucht. Darüber hinaus ist es möglich, Elemente unterschiedlichen Polynomgrades p an den Standardseiten und den Verfeinerungsseiten anzuschließen. Der praktische Einsatz der Übergangselemente setzt geeignete automatische oder halbautomatische Netzgeneratoren voraus, die diese Elemente einbeziehen. Im Rahmen einer substrukturorientierten Modellierung läßt sich dies besonders günstig realisieren. Im Beitrag wird gezeigt, wie durch Zerlegung des Gesamtmodells in Bereiche mit grobem Netz, mit Übergangsnetz und mit feinem Netz, eine effektive Generierung der Netzverdichtungen zu erreichen ist. An einem praktischen Beispiel aus dem Bauingenieurwesen werden die Vorteile des vorgestellten Übergangselementkonzeptes umfassend demonstriert. KW - Tragwerk KW - Modellierung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4267 ER - TY - CHAP A1 - Boukamp, Frank A1 - Akinci, Burcu T1 - Towards Automated Defect Detection: Object-oriented Modeling of Construction Specifications N2 - This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system. KW - Bauwerk KW - Datenmanagement KW - Modellierung KW - Norm Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1315 ER - TY - THES A1 - Bubner, André T1 - Datenmodelle zur Bearbeitung von Ingenieuraufgaben am Beispiel von Wohnhäusern in Stahlbauweise T1 - Data Models for Processing of Engineering Tasks at the Example of Residential Buildings in Steel Construction Method N2 - Modelle bilden die Grundlage der Planung. Sie repräsentieren die zur Bearbeitung erforderlichen Eigenschaften eines Bauwerks in einer an die spezifische Aufgabe angepassten Form. Zwischen den verschiedenen zur Abbildung des Bauwerks eingesetzten Modellen bestehen fachliche Zusammenhänge bezüglich der darin abgebildeten Aspekte. Diese Abhängigkeiten werden in der praktischen Planungsbearbeitung gegenwärtig auf Grundlage von Erfahrungswerten, normativen Vorgaben und vereinfachenden Annahmen berücksichtigt. Die detailliertere Modellierung von Bauwerkseigenschaften führt zu einer engeren Verzahnung der verschiedenen Modelle. Um eine fachliche Inselbildung zu vermeiden, ist eine entsprechend angepasste Abbildung der zwischen den einzelnen Modellen bestehenden Beziehungen erforderlich. Mit den steigenden Ansprüchen an eine Bearbeitung von Ingenieuraufgaben gewinnt eine über den Zweck der Bereitstellung ausgewählter Informationen zum Bauwerk und der Unterstützung eines Datenaustauschs zwischen verschiedenen Fachplanern hinausgehende datentechnische Abbildung an Bedeutung. Dies setzt eine Diskussion der Anforderungen an eine solche Beschreibung aus fachlicher Sicht voraus. Die Untersuchung der fachlichen Anforderungen wird am Beispiel von Wohnhäusern in Stahlbauweise geführt. N2 - Models form the basis of the planning. They represent the characteristics necessary for the processing of a building in a form suited to the specific task. Between the different models, which are used for the representation of the building, there exist engineer-technical interrelations with regard to the illustrated aspects. At present these dependences are taken into consideration in the practical planning on basis of empirical values, normative guidelines and simplifying assumptions. The more detailed modelling of the building characteristics leads to a more defined linkage of the different models. To avoid an engineering island formation, there is an accordingly adapted representation of the relations existing between the single models necessary. With the rising demands on the processing of engineering tasks a data-technical representation wins in importance which realises more than a supply of selected information about the building and the support of a data exchange between different planners. This requires a discussion of the requirements for such a description from an engineer-technical view. The investigation of these technical requirements is carried out by the example of residential buildings in steel construction method. KW - Modellierung KW - Stahlbau KW - Wohnungsbau KW - Datenmodell KW - Modellbildung KW - Wohnhäuser in Stahlbauweise KW - fachliche Integration KW - Bearbeitung von Ingenieuraufgaben KW - modelling KW - residential buildings KW - engineer-technical integration KW - processing of engineering tasks Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20070423-8580 ER - TY - THES A1 - Chan, Chiu Ling T1 - Smooth representation of thin shells and volume structures for isogeometric analysis N2 - The purpose of this study is to develop self-contained methods for obtaining smooth meshes which are compatible with isogeometric analysis (IGA). The study contains three main parts. We start by developing a better understanding of shapes and splines through the study of an image-related problem. Then we proceed towards obtaining smooth volumetric meshes of the given voxel-based images. Finally, we treat the smoothness issue on the multi-patch domains with C1 coupling. Following are the highlights of each part. First, we present a B-spline convolution method for boundary representation of voxel-based images. We adopt the filtering technique to compute the B-spline coefficients and gradients of the images effectively. We then implement the B-spline convolution for developing a non-rigid images registration method. The proposed method is in some sense of “isoparametric”, for which all the computation is done within the B-splines framework. Particularly, updating the images by using B-spline composition promote smooth transformation map between the images. We show the possible medical applications of our method by applying it for registration of brain images. Secondly, we develop a self-contained volumetric parametrization method based on the B-splines boundary representation. We aim to convert a given voxel-based data to a matching C1 representation with hierarchical cubic splines. The concept of the osculating circle is employed to enhance the geometric approximation, where it is done by a single template and linear transformations (scaling, translations, and rotations) without the need for solving an optimization problem. Moreover, we use the Laplacian smoothing and refinement techniques to avoid irregular meshes and to improve mesh quality. We show with several examples that the method is capable of handling complex 2D and 3D configurations. In particular, we parametrize the 3D Stanford bunny which contains irregular shapes and voids. Finally, we propose the B´ezier ordinates approach and splines approach for C1 coupling. In the first approach, the new basis functions are defined in terms of the B´ezier Bernstein polynomials. For the second approach, the new basis is defined as a linear combination of C0 basis functions. The methods are not limited to planar or bilinear mappings. They allow the modeling of solutions to fourth order partial differential equations (PDEs) on complex geometric domains, provided that the given patches are G1 continuous. Both methods have their advantages. In particular, the B´ezier approach offer more degree of freedoms, while the spline approach is more computationally efficient. In addition, we proposed partial degree elevation to overcome the C1-locking issue caused by the over constraining of the solution space. We demonstrate the potential of the resulting C1 basis functions for application in IGA which involve fourth order PDEs such as those appearing in Kirchhoff-Love shell models, Cahn-Hilliard phase field application, and biharmonic problems. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2020,2 KW - Modellierung KW - Isogeometrische Analyse KW - NURBS KW - Geometric Modeling KW - Isogeometric Analysis KW - NURBS Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200812-42083 ER - TY - JOUR A1 - Chubukov, A. A1 - Kapitanov, Valeriy A1 - Monina, Olga A1 - Silyanov, Valentin A1 - Brannolte, Ulrich T1 - Simulation of Regional Mortality Rate in Road Accidents JF - Transportation Research Procedia 20 N2 - The paper gives the results of scientific research, which, being based on probabilistic and statistical modeling, identifies the relationship of certain socio-economic factors and the number of people killed in road accidents in the Russian Federation regions. It notes the identity of processes in various fields, in which there is loss of life. Scientific methods and techniques were used in the process of data processing and study findings: systematic approach, methods of system analysis (algorithmization, mathematical programming) and mathematical statistics. The scientific novelty lies in the formulation, formalization and solving problems related to the analysis of regional road traffic accidents, its modeling taking into account the factors of socio-economic impact. KW - Modellierung KW - correlation; factors; loss of life in accidents; modeling; Road traffic accidents; socio-economic aspect; statistical analysis Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170331-30956 UR - http://www.sciencedirect.com/science/article/pii/S2352146517300315 SP - 112 EP - 124 ER - TY - JOUR A1 - Dudek, Mariusz T1 - Modellierung der Verkehrsmittelwahl N2 - Die Zielstellung der Modal­Split­Betrachtungen läuft darauf hinaus, Entscheidungs-kriterien zu erarbeiten, nach denen die einzelnen Personen ihre Verkehrsmittel auswählen. In dieser Veröffentlichung wurden alle drei Gruppen der Modelle (klassische, verhaltensorientierte und der Analyse) der Verkehrsaufteilung kurz charakterisiert. Dann wurden vier ausgewählte Modelle genauer beschrieben. Zum Schluß wird das Modell der Verkehrsmittelwahl dargestellt , das für die Untersuchung der Verkehrsaufteilung in Krakau verwendet wurde . KW - Verkehrsmittelwahl KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4817 ER - TY - CHAP A1 - Eslimy-Isfahany, S. H. R. A1 - Pegels, Georg T1 - Net-distributed Co-operation Including Developing Countries, Practical Case Study - Iran N2 - The scientific transfer of key technology features to developing countries, together with adequate competence, localisation and adaptation, is the primary purpose of the proposed investigation. It is evident that introducing high-level CAD design and detailing will improve the planning process in developing countries. Successful utilization of applied information technology for the planning process, however, depends on the user-interface of individual software. Therefore, to open the great opportunity embedded in CAD software for clients globally, the language and character-set barrier of traditional user-interfaces must be overcome. A proposal for a research program is given here to address such issue in favour of global civil engineering. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Iran Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1421 ER -