TY - CHAP
A1 - Most, Thomas
A1 - Eckardt, Stefan
A1 - Schrader, Kai
A1 - Deckner, T.
T1 - An improved cohesive crack model for combined crack opening and sliding under cyclic loading
N2 - An improved cohesive crack model for combined crack opening and sliding under cyclic loading
KW - Angewandte Mathematik
KW - Strukturmechanik
Y1 - 2006
ER -
TY - CHAP
A1 - Most, Thomas
A1 - Eckardt, Stefan
A1 - Schrader, Kai
A1 - Deckner, T.
ED - Gürlebeck, Klaus
ED - Könke, Carsten
T1 - AN IMPROVED COHESIVE CRACK MODEL FOR COMBINED CRACK OPENING AND SLIDING UNDER CYCLIC LOADING
N2 - The modeling of crack propagation in plain and reinforced concrete structures is still a field for many researchers. If a macroscopic description of the cohesive cracking process of concrete is applied, generally the Fictitious Crack Model is utilized, where a force transmission over micro cracks is assumed. In the most applications of this concept the cohesive model represents the relation between the normal crack opening and the normal stress, which is mostly defined as an exponential softening function, independently from the shear stresses in tangential direction. The cohesive forces are then calculated only from the normal stresses. By Carol et al. 1997 an improved model was developed using a coupled relation between the normal and shear damage based on an elasto-plastic constitutive formulation. This model is based on a hyperbolic yield surface depending on the normal and the shear stresses and on the tensile and shear strength. This model also represents the effect of shear traction induced crack opening. Due to the elasto-plastic formulation, where the inelastic crack opening is represented by plastic strains, this model is limited for applications with monotonic loading. In order to enable the application for cases with un- and reloading the existing model is extended in this study using a combined plastic-damage formulation, which enables the modeling of crack opening and crack closure. Furthermore the corresponding algorithmic implementation using a return mapping approach is presented and the model is verified by means of several numerical examples. Finally an investigation concerning the identification of the model parameters by means of neural networks is presented. In this analysis an inverse approximation of the model parameters is performed by using a given set of points of the load displacement curves as input values and the model parameters as output terms. It will be shown, that the elasto-plastic model parameters could be identified well with this approach, but require a huge number of simulations.
KW - Architektur
KW - CAD
KW - Computerunterstütztes Verfahren
Y1 - 2006
U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-29933
UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html
ER -