TY - CHAP A1 - Bargstädt, Hans-Joachim T1 - Was ist die richtige Systemantwort auf die sich atomisierende Bauwirtschaft? N2 - Nur durch Aufträge entsteht das Potenzial, die hochwertigen und modernen Produkte, Verfahren und Systeme auch erfolgreich und vielfach in die Realität umzusetzen. Deshalb sind auch im traditionellen Bauwesen die Mechanismen des Marketings für die Akquisition zu analysieren und hinterfragt der Verfasser das Bild von Baubetrieben als kompetente Anbieter für alle Phasen des Bauens vom Baustoff bis zur Inbetriebnahme eines schlüsselfertigen Objektes. Systemanbieter bereiten die Basis für eine innovative und vernetzte Arbeitsweise. KW - Baubetriebslehre KW - Marketing KW - Akquisition KW - Bauwirtschaft Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7161 ER - TY - CHAP A1 - Miles, John A1 - Taylor, Mark A1 - Anumba, Chimay T1 - VRML Virtual Worlds - An Alternative to the Desktop Metaphor for GUI's? N2 - Metaphors are commonly used by software developers in the creation of GUI's. This paper looks at the use of multi-user VRML to create virtual metaphors, developing a conceptual design tool that can be used intuitively with little or no training. KW - Architektur KW - Verteiltes System KW - Graphische Benutzeroberfläche KW - VRML Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1855 ER - TY - JOUR A1 - Kaapke, Kai A1 - Milbradt, Peter T1 - Voronoi-based finite volume method for transport problems N2 - Transport problems, as, for instance, the transport of sediment in hydraulic engineering and the transport of harmful substances through porous media, play an important role in many fields of civil engineering. Other examples include the dissipation of heat or sound as well as the simulation of traffic with macroscopic models. The contribution explains the analysis of the applicability of Voronoi-based finite volume methods for the approximation of solutions of transport problems. A special concern is the discretisation of the transport equation. Current limitations of the method as well as ideas for stabilisation are explained with examples. KW - Finite-Elemente-Methode KW - Physikalisches Verfahren KW - Transport Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2558 ER - TY - JOUR A1 - Semenov, Vitaly A1 - Alekseeva, Elena A1 - Tarlapan, Oleg T1 - Virtual Construction using Map-based Approach N2 - The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Virtuelle Realität KW - Bauwerk Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2447 ER - TY - CHAP A1 - Katzer, Wolfgang T1 - Virtual Construction for our industry – an advantage now, a necessity soon N2 - Some key facts about the economic environment of construction industry are explained. It is shown that construction industry is very heterogeneous and has changed drastically during the recent years due to a rapidly moving commercial environment. Two examples of todays’s use of virtual construction tools in construction projects are presented. The first example is the document control for a large international project. The second is the application of 4D modelling in the preconstruction phase of a dam project. It is shown that virtual construction, is a major international trend that currently takes up speed. Some generic industry needs for Research and Development which aims at short and medium term results are presented. KW - Konstruktion KW - construction industry Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1573 ER - TY - THES A1 - Füllsack-Köditz, Raimo T1 - Verbundverhalten von GFK-Bewehrungsstäben und Rissentwicklung in GFK-stabbewehrten Betonbauteilen T1 - Bond characteristics of GFRP-rebars and cracking formation of GFRP reinforced concrete structures N2 - In der vorliegenden Arbeit werden im Rahmen von Ausziehversuchen die Verbundeigenschaften verschiedener Bewehrungsstäbe aus glasfaserverstärkten Kunststoffen (GFK) unter Berücksichti-gung signifikanter Einflussgrößen auf das Verbundverhalten wie Oberflächenprofilierung der Stäbe, Stabdurchmesser, Betonfestigkeit, Verbundlänge sowie Beanspruchungsart unter einheitlichen Versuchsrandbedingungen bestimmt. Es erfolgt eine Bewertung der Einflussgrößen, der Verbundeigenschaften und des Verbundversagens der untersuchten GFK-Bewehrungsstäbe. Basierend auf der Modellbildung zum Verbund zwischen GFK-Stäben und Beton wird die Bestimmung der Verankerungslänge aufgezeigt. Im Rahmen von Versuchen an GFK-stabbewehrten Dehnkörpern und Balken wird die Auswirkung der spezifischen mechanischen Eigenschaften der GFK-Stäbe auf die Rissentwicklung gegenüber stahlbewehrten Bauteilen untersucht. Insbesondere wird betrachtet, welchen Einfluss das Bewehrungsmaterial, der Bewehrungsgrad, die Betonfestigkeit sowie die Belastungsart auf die Mitwirkung des Betons auf Zug zwischen den Rissen sowie auf die Entwicklung des Rissbildes, der Rissbreiten und der Rissabstände haben. Auf Grundlage der experimentellen Untersuchungen wird die Übertragbarkeit der für Stahlbetonbauteile üblichen Ansätze zur Bestimmung der Rissbreite auf GFK-stabbewehrte Betonbauteile bewertet. N2 - The objective is to determine the bonding characteristics of different types of glass fiber reinforced plastic (GFRP) rebars using pull-out tests taking into consideration of significant influence parameters such as the type of bar surface deformation, bar diameter, concrete strength, bonding length and type of loading. The influence parameter will be appraised. The bonding characteristics an the bonding failure of the tested GFRP rebars will be classified. The determination of anchorage length for GFRP rebars will be shown based on bond models for GFRP rebars analogue to reinforcing steel. The scope of tests performed on GFRP reinforced beams and concrete tensile specimens will allow investigation into effects on the specific mechanical behaviours and the specific bonding characteristic of GFRP reinforcing bars on cracking formation. The effects of the physical behaviours of reinforcing material, percentage of reinforcement, concrete strength and type of loading on tension stiffening as well as crack pattern, crack widths and crack spacing will also be examined. Analysis of the results from these experiments will determine whether statements regarding crack width calculation are transferable between reinforced concrete structures and GFRP reinforced concrete structures. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 1 KW - Verbundverhalten KW - Glasfaserverstärkter Kunststoff KW - Stahlbetonkonstruktion KW - Stahlbeton KW - Stahlbetonbau KW - GFK KW - Ausziehversuch KW - Rissentwicklung KW - Rissbreite KW - Verbund KW - GFRP KW - bond KW - cracking KW - concrete KW - pull-out Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20041206-2344 SN - 3-86068-240-7 ER - TY - THES A1 - Germerott, René T1 - Variantenuntersuchung für eine dauerhafte Bahndammsanierung unter zu Hilfenahme numerischer Methoden N2 - Das Ziel der Arbeit war es, die Standsicherheit eines Bahndammes im Vergleich der in Deutschland gültigen Vorschriften (DIN 1054 und Eurocode 7) zu untersuchen. Sollte sich dabei herausstellen, dass der Bahndamm in der gegebenen Situation die Standsicherheitsanforderungen nicht erfüllt sollten verschiedene Sanierungsvarianten vorgeschlagen und für eine Vorzugsvariante die wichtigsten Nachweise durchgeführt werden. Zunächst wurden die Allgemeinen Grundlagen der zur Zeit in Deutschland gültigen Vorschriften erläutert und anschließend auf das konkrete Projekt bezogen gegenübergestellt. Es stellte sich heraus, dass die Anforderungen an die Standsicherheit bei Berechnung nach beiden Vorschriften nicht erfüllt werden konnten. Somit war es notwendig für die gegebene Situation mögliche Sanierungsvorschläge zu entwickeln. Diese wurden anschließend kurz vorgestellt und erläutert. Schließlich wurden für die Vorzugsvariante die wichtigsten Nachweise im Vergleich der Vorschriften (DIN 1054 und Eurocode 7) durchgeführt und verglichen. KW - Aktiver Erddruck KW - Bewehrte Erde KW - Böschungsbruch KW - Erddruck KW - Eurocode 7 KW - Geländebruch KW - Passiver Erddruck KW - Pfahlwand KW - DIN 1054 Teil 100 Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3500 ER - TY - CHAP A1 - Robert-Nicoud, Yvan A1 - Raphael, Benny A1 - Smith, Ian F. C. T1 - Using entropy to maximize the usefulness of data collection N2 - This paper presents a generic methodology for measurement system configuration when the goal is to identify behaviour models that reasonably explain observations. For such tasks, the best measurement system provides maximum separation between candidate models. In this work, the degree of separation between models is measured using Shannon’s Entropy Function. The location and type of measurement devices are chosen such that the entropy of candidate models is greatest. This methodology is tested on a laboratory structure and, to demonstrate generality, an existing fresh water supply network in a city in Switzerland. In both cases, the methodology suggests an appropriate set of sensors for identifying the state of the system. KW - Mobile Computing KW - Funknetz KW - Entropie Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1177 ER - TY - CHAP A1 - Parmee, Ian A1 - Abraham, Johnson T1 - User-centric Evolutionary Design Systems - the Visualisation of Emerging Multi-Objective Design Information N2 - The paper describes further developments of the interactive evolutionary design concept relating to the emergence of mutually inclusive regions of high performance design solutions. These solutions are generated from cluster-oriented genetic algorithm (COGAs) output and relate to a number of objectives introduced during the preliminary design of military airframes. The data-mining of multi-objective COGA (moCOGA) output further defines these regions through the application of clustering algorithms, data reduction and variable attribute relevance analyses. A number of visual representations of the COGA output projected onto both variable and objective space are presented. The multi-objective output of the COGA is compared to output from a Strength Pareto Evolutionary Algorithm (SPEA-II) to illustrate the manner in which moCOGAs can generate good approximations to Pareto frontiers. KW - Konzipieren KW - Bauwerk KW - Künstliche Intelligenz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1094 ER - TY - JOUR A1 - Katranuschkov, Peter A1 - Gehre, Alexander A1 - Scherer, Raimar J. T1 - User Requirements Capture in Distributed Project Environments: A Process-centred Approach N2 - Efforts to define standards for representing AEC/FM data have been fairly successful. However defining a standard reference process model has not met with the same success. Yet almost every conceptual modelling or software development project starts by defining the business processes to be supported and the related requirements to be satisfied. This paper describes a new process-centred methodology for user requirements capture developed in the ICCI project (IST-2001-33022). Its essence is in recognising user requirements and use cases in the context of the real construction process, identifying the actors and roles for each individual activity and associating these activities with information, communication and standardisation requirements on the basis of a formalised specification, named the Process Matrix. In the paper we outline the history of process matrix development, introduce the basic structure of the matrix and show how it can be further extended and refined. We present also a web-based software implementation of the developed approach, describe how it has been used in ICCI and outline further perspectives. KW - Informationstechnik KW - Forschung KW - Europa KW - Bedarfsforschung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2029 ER -