TY - JOUR A1 - Meel, Inder P. A1 - Brannolte, Ulrich A1 - Satirasetthavee, Dussadee A1 - Kanitpong, Kunnawee T1 - Safety impact of application of auxiliary lanes at downstream locations of Thai U-turns JF - IATSS Research N2 - To assess the safety impact of auxiliary lanes at downstream locations of U-turns, the Traffic Conflict Technique was used. On the basis of the installed components at those locations, four types of U-turns were identified: those without any auxiliary lane, those with an acceleration lane, those with outer widening, and those with both an acceleration lane and outer widening. The available crash data is unreliable, therefore to assess the level of road safety, Conflict Indexes were formulated to put more emphasis on severe crashes than on slight ones by using two types of weighting coefficients. The first coefficient was based on the subjective assessment of the seriousness of the conflict situation and the second was based on the relative speed and angle between conflicting streams. A comparatively higher Conflict Index value represents a lower level of road safety. According to the results, a lower level of road safety occurs if two components apply or if a location is without any auxiliary lane. The highest level of road safety occurs if the layout includes only a single component, either an acceleration lane or outer widening. KW - Verkehrssicherheit KW - Beschleunigungsstreifen KW - Auxiliary lane; Conflict Indexes; Road safety; Traffic Conflict Technique; U-turn Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170401-31016 UR - http://www.sciencedirect.com/science/article/pii/S0386111216300140 ER - TY - JOUR A1 - Marzban, Samira A1 - Lahmer, Tom T1 - Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects JF - Journal of Statistical Theory and Practice N2 - Conceptual implementation of the variance-based sensitivity analysis for the calculation of the first-order effects KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 589 EP - 611 ER - TY - BOOK A1 - Löser, Ricarda T1 - B+cher. Zwischen Lesen und Schauen – Über die narrative Typografie im Buch N2 - Die Arbeit »B+cher. Zwischen Lesen und Schauen – Über die narrative Eigenschaft von Typografie« beschreibt ein Spannungsfeld in der Arbeit von Typografinnen und Typografen, das sich zwischen den beiden Gegensätzen verdeutlicht, »Diener des Textes« (Jan Tschichold) zu sein oder aber sein (künstlerischer) Souverän. Es sind Facetten beschreibbar, die sich nicht nur anhand der fertigen Buchobjekte ablesen lassen, sondern den Arbeitsprozess von Kooperationen zwischen Autor*in und Gestalter*in in den Fokus nimmt, welche der Rezeption eines Textes durch seine besondere Gestaltung einen Mehrwert (»+«) verschaffen wollen. »B+cher« bietet eine nicht nur für Gestalter*innen relevante Übersicht über Möglichkeiten und Chancen der Buchgestaltung, sondern liefert darüber hinaus der Literatur- und Kulturwissenschaft einen Beitrag zum Verständnis von künstlerischen Prozessen beim Schreiben und beim Gestalten von Büchern. KW - Buch / Typografie KW - Buchkunst KW - Typografie / Narrativität KW - Typografie KW - Buchgestaltung KW - Buchgestaltung KW - Typografie KW - Narrativität KW - Buchkunst KW - Buch / Typografie Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220503-46233 ER - TY - THES A1 - Loh, Franziska T1 - Soziales Grafikdesign – eine Frage der Haltung N2 - Die Ph.D.-Arbeit Soziales Grafikdesign – eine Frage der Haltung hinterfragt den Einfluss und die Wirkungsmacht, den visuelle Kommunikationsgestaltung auf den Betrachter und im weiteren Sinne auf die Gesellschaft im Ganzen haben können. Aufbauend auf den Erkenntnissen über die Wirkungsmacht wird untersucht, wie eine bewusste und sozial verantwortliche Haltung im Grafikdesign aussehen könnte. Viele Grafikdesigner sind in der Werbebranche tätig und haben den Auftrag, ganz bewusst manipulativ und wirkungsstark Informationen visuell zu übersetzen, um den Betrachter zu einer Handlungsfolge zu animieren. Die bewusste Reflexion der eigenen Rolle als Designer in diesem Prozess führt immer wieder zu den Fragen nach der Verantwortlichkeit des Gestalters und auch dazu, wie der Gestalter die Potenziale der Kommunikationsgestaltung in anderen Bereichen, wie z. B. in städtischen Problemsituationen, für ein soziales Miteinander einsetzen kann. KW - Grafikdesign KW - Sozial KW - Grafikdesign KW - Soziales Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160419-25641 ER - TY - THES A1 - Linke, Maja T1 - von WIR und IHR zum WIHR - verletzendes Sprechen und Kritik N2 - In meiner theoretisch_praktischen Arbeit befasse ich mich mit der verletzenden Kraft von Sprache jenseits direkter Adressierung. Es wird der Frage nachgegangen, ob und wie auch da Verletzung durch Sprache stattfindet, wo keine offensichtliche Diskriminierung erfolgt, sondern subtilere Wirkmächte der Performativität am Werk sind. Sprachliche Benenn- und Beweisbarkeit verletzenden Sprechens werden dabei in Frage gestellt und einem Wahrnehmen und Begegnen Vorrang gegeben. Sowohl im eher theoretischen Teil, dem „Fragment I: 943 Fragen zur sprachlichen Gewalt“, als auch im vorwiegend praktischen Teil, dem „Fragment II: Untersuchungen und Zwischennutzungen“, wird eine Perspektive auf kritische Handlungsfähigkeit in Bezug auf Sprache und Gewalt eröffnet. Es wird ein Verständnis von Verantwortung als ein Affekt und zugleich Ort der Kritik zur Diskussion gestellt und befragt. Dabei versuche ich, über die dichotome Verfestigung von „Wir und die Anderen“ hinauszugelangen und dabei ein WIR, das nicht vom IHR getrennt ist, als WIHR in den Blick zu nehmen. Dieses WIHR muss notwendigerweise offen und flexibel bleiben. Es soll eine Art Möglichkeitsraum schaffen, der nicht neu geordnet, sondern im beständigen Fragen einer abschließenden Antwort entzogen wird. Eine Annäherung in vor allem zeichnerischen und auditiven Untersuchungen sowie 943 Fragen. KW - Künstlerische Forschung KW - Kritik KW - Hate Speech KW - Affekt KW - Zeichnung KW - Künstlerische Forschung KW - Kritik KW - Artistic Research KW - Zeichnung KW - Affekt Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20161130-27189 ER - TY - THES A1 - Lang, Kevin T1 - Worteinbettung als semantisches Feature in der argumentativen Analyse N2 - Diese Arbeit beschäftigt sich mit der Nutzung von Worteinbettungen in der automatischen Analyse von argumentativen Texten. Die Arbeit diskutiert wichtige Einstellungen des Einbettungsverfahren sowie diverse Anwendungsmethoden der eingebetteten Wortvektoren für drei Aufgaben der automatischen argumentativen Analyse: Textsegmentierung, Argumentativitäts-Klassifikation und Relationenfindung. Meine Experimente auf zwei Standard-Argumentationsdatensätzen zeigen die folgenden Haupterkenntnisse: Bei der Textsegmentierung konnten keine Verbesserungen erzielt werden, während in der Argumentativitäts-Klassifikation und der Relationenfindung sich kleine Erfolge gezeigt haben und weitere bestimmte Forschungsthesen bewahrheitet werden konnten. In der Diskussion wird darauf eingegangen, warum bei der einfachen Worteinbettung in der argumentativen Analyse sich kaum nutzbare Ergebnisse erzielen lassen konnten, diese sich aber in Zukunft durch erweiterte Worteinbettungsverfahren verbessern können. KW - Argumentation KW - Worteinbettung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190617-39343 ER - TY - JOUR A1 - Lahmer, Tom A1 - Nguyen-Tuan, Long A1 - Könke, Carsten A1 - Bettzieche, Volker T1 - Thermo-hydro-mechanische 3-D-Simulation von Staumauern‐Modellierung und Validierung JF - WASSERWIRTSCHAFT N2 - Thermo-hydro-mechanische 3-D-Simulation von Staumauern‐Modellierung und Validierung KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 27 EP - 30 ER - TY - JOUR A1 - Lahmer, Tom A1 - Bock, Sebastian A1 - Hildebrand, Jörg A1 - Gürlebeck, Klaus T1 - Non-destructive identification of residual stresses in steel under thermal loadings JF - Inverse Problems in Science and Engineering N2 - Non-destructive identification of residual stresses in steel under thermal loadings KW - Angewandte Mathematik KW - Stochastik KW - Strukturmechanik Y1 - 2016 SP - 1 EP - 17 ER - TY - CHAP A1 - König, Reinhard A1 - Varoudis, Tasos T1 - Spatial Optimizations: Merging depthmapX , spatial graph networks and evolutionary design in Grasshopper T2 - Proceedings of ecaade 34: Complexity & Simplicity N2 - In the Space Syntax community, the standard tool for computing all kinds of spatial graph network measures is depthmapX (Turner, 2004; Varoudis, 2012). The process of evaluating many design variants of networks is relatively complicated, since they need to be drawn in a separated CAD system, exported and imported in depthmapX via dxf file format. This procedure disables a continuous integration into a design process. Furthermore, the standalone character of depthmapX makes it impossible to use its network centrality calculation for optimization processes. To overcome this limitations, we present in this paper the first steps of experimenting with a Grasshopper component (reference omitted until final version) that can access the functions of depthmapX and integrate them into Grasshopper/Rhino3D. Here the component is implemented in a way that it can be used directly for an evolutionary algorithm (EA) implemented in a Python scripting component in Grasshopper KW - depthmapx KW - python KW - optimization KW - space syntax KW - grasshopper Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160622-26040 SP - 1 EP - 6 CY - Oulu, Finland ER - TY - CHAP A1 - König, Reinhard A1 - Schmitt, Gerhard ED - Szoboszlai, Mihály T1 - Backcasting and a new way of command in computational design : Proceedings T2 - CAADence in Architecture Conference N2 - It's not uncommon that analysis and simulation methods are used mainly to evaluate finished designs and to proof their quality. Whereas the potential of such methods is to lead or control a design process from the beginning on. Therefore, we introduce a design method that move away from a “what-if” forecasting philosophy and increase the focus on backcasting approaches. We use the power of computation by combining sophisticated methods to generate design with analysis methods to close the gap between analysis and synthesis of designs. For the development of a future-oriented computational design support we need to be aware of the human designer’s role. A productive combination of the excellence of human cognition with the power of modern computing technology is needed. We call this approach “cognitive design computing”. The computational part aim to mimic the way a designer’s brain works by combining state-of-the-art optimization and machine learning approaches with available simulation methods. The cognition part respects the complex nature of design problems by the provision of models for human-computation interaction. This means that a design problem is distributed between computer and designer. In the context of the conference slogan “back to command”, we ask how we may imagine the command over a cognitive design computing system. We expect that designers will need to let go control of some parts of the design process to machines, but in exchange they will get a new powerful command on complex computing processes. This means that designers have to explore the potentials of their role as commanders of partially automated design processes. In this contribution we describe an approach for the development of a future cognitive design computing system with the focus on urban design issues. The aim of this system is to enable an urban planner to treat a planning problem as a backcasting problem by defining what performance a design solution should achieve and to automatically query or generate a set of best possible solutions. This kind of computational planning process offers proof that the designer meets the original explicitly defined design requirements. A key way in which digital tools can support designers is by generating design proposals. Evolutionary multi-criteria optimization methods allow us to explore a multi-dimensional design space and provide a basis for the designer to evaluate contradicting requirements: a task urban planners are faced with frequently. We also reflect why designers will give more and more control to machines. Therefore, we investigate first approaches learn how designers use computational design support systems in combination with manual design strategies to deal with urban design problems by employing machine learning methods. By observing how designers work, it is possible to derive more complex artificial solution strategies that can help computers make better suggestions in the future. KW - Cognitive design computing KW - machine learning KW - backcasting KW - design synthesis KW - evolutionary optimization KW - CAD Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160622-25996 SP - 15 EP - 25 CY - Budapest ER -