TY - CHAP A1 - Masih, Rusk T1 - EFFECT OF DEMOLITION ON REMAINING PART OF CONCRETE BRIDGE NUMERICAL ANALYSIS VS. EXPERIMENTAL RESULTS N2 - The US Department of Highways is embarked on a very ambitious program to renovate much of the bridges and highways allover the USA. While it is doing so, it is also trying to take advantage of using such program to enhance the research for future programs. One of those projects is a 1000 ft. (305 m) long concrete bridge in the State of Vermont, located in the North East of USA. It is scheduled for renovation, in which the deck and its side parapet walls will be replaced. New England Transportation Consortium (NETC) decided to make further use of this project to find what effect will the heavy demolition tools have on the concrete to remain in place. The goal is to find out the extent of the experimental measurement agreement with the analytical results. In order to accomplish such a goal, numerous strain gages were installed at and in the vicinity of the demolition areas. Those gages will measure the effect of the demolition on the adjacent areas, and how far the destructive effect of the powerful demolition tools can propagate through different parts of the structure. The gages are connected to National Instruments data acquisition equipment, which is connected to a lap top computer to save all the acquired data. The analytical part the project will be using the energy method, which means that the energy applied by the demolition tools should equal the energy absorbed by the demolished structure, in elastic and plastic deformation forms. KW - Betonbrücke KW - Reparatur KW - Beton KW - Dynamische Belastung KW - Mechanische Eigenschaft Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6032 ER - TY - CHAP A1 - Chudoba, Rostislav A1 - Butenweg, Christoph A1 - Pfeiffer, Frank T1 - Textile Reinforced Concrete Part I: Process Model for Collaborative Research and Development N2 - The goal of the collaborative research center (SFB 532) >Textile reinforced concrete (TRC): the basis for the development of a new material technology< installed in 1998 at the Aachen University is a complex assessment of mechanical, chemical, economical and productional aspects in an interdisciplinary environment. The research project involves 10 institutes performing parallel research in 17 projects. The coordination of such a research process requires effective software support for information sharing in form of data exchange, data analysis and data archival. Furthermore, the processes of experiment planning and design, modification of material compositions and design parameters and development of new material models in such an environment call for systematic coordination applying the concepts of operational research. Flexible organization of the data coming from several sources is a crucial premise for a transparent accumulation of knowledge and, thus, for a successful research in a long run. The technical information system (TRC-TIS) developed in the SFB 532 has been implemented as a database-powered web server with a transparent definition of the product and process model. It serves as an intranet server with access domains devoted to the involved research groups. At the same time, it allows the presentation of selected results just by granting a data object an access from the public area of the server via internet. KW - Beton KW - Bewehrung KW - Textilfaser KW - Datenbank Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2866 ER - TY - CHAP A1 - Lepenies, Ingolf A1 - Richter, Mike A1 - Zastrau, Bernd W. T1 - Numerische Simulation des mechanischen Verhaltens von Textilbeton unter Berücksichtigung mehrerer Strukturebenen N2 - The failure mechanisms of textile reinforced concrete (TRC), which is a composite of bundles of long fibers and fine concrete, are complex. Most important for the ductility is the successive debonding of the fibers from the surrounding matrix when the brittle matrix is cracking. Therefore, one of the main issues is the simulation of the bond behavior between the reinforcement and the matrix. By introducing a hierarchical material model for TRC the mechanical behavior is simulated by means of representative volume elements modelled on the meso scale. Finite element analysis is used to determine the effective properties of TRC within a periodic homogenization framework. Further, a multiscale finite element technique is suggested, where constitutive equation are formulated only on the meso level. KW - Beton KW - Bewehrung KW - Textilfaser KW - Mechanische Eigenschaft KW - Modellierung Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3281 ER - TY - CHAP A1 - Konrad, Martin A1 - Chudoba, Rostislav A1 - Butenweg, Christoph T1 - Textile Reinforced Concrete Part II: Multi-Level Modeling Concept N2 - The development of a consistent material model for textile reinforced concrete requires the formulation and calibration of several sub-models on different resolution scales. Each of these models represents the material structure at the corresponding scale. While the models at the micro-level are able to capture the fundamental failure and damage mechanisms of the material components (e.g. filament rupture and debonding from the matrix) their computational costs limit their application to the small size representative unit cells of the material structure. On the other hand, the macro-level models provide a sufficient performance at the expense of limited range of applicability. Due to the complex structuring of the textile reinforced concrete at several levels (filament - yarn - textile - matrix) it is a non-trivial task to develop a multiscale model from scratch. It is rather more effective to develop a set of conceptually related sub-models for each structural level covering the selected phenomena of the material behavior. The homogenized effective material properties obtained at the lower level may be verified and validated using experiments and models at the higher level(s). In this paper the development of a consistent material model for textile reinforced concrete is presented. Load carrying and failure mechanisms at the micro, meso and macro scales are described and models with the focus on the specified scales are introduced. The models currently being developed in the framework of the collaborative research center are classified and evaluated with respect to the failure mechanisms being captured. The micromechanical modeling of the yarn and bonding behavior is discussed in detail and the correspondence with the experiments focused on the selected failure and interaction mechanisms is shown. The example of modeling the bond layer demonstrates the application of the presented strategy. KW - Beton KW - Bewehrung KW - Textilfaser KW - Mathematisches Modell Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3230 ER - TY - CHAP A1 - Häfner, Stefan A1 - Eckardt, Stefan A1 - Könke, Carsten T1 - A geometrical inclusion-matrix model for the finite element analysis of concrete at multiple scales N2 - This paper introduces a method to generate adequate inclusion-matrix geometries of concrete in two and three dimensions, which are independent of any specific numerical discretization. The article starts with an analysis on shapes of natural aggregates and discusses corresponding mathematical realizations. As a first prototype a two-dimensional generation of a mesoscale model is introduced. Particle size distribution functions are analysed and prepared for simulating an adequate three-dimensional representation of the aggregates within a concrete structure. A sample geometry of a three-dimensional test cube is generated and the finite element analysis of its heterogeneous geometry by a uniform mesh is presented. Concluding, aspects of a multiscale analysis are discussed and possible enhancements are proposed. KW - Beton KW - Dreidimensionales Modell KW - Finite-Elemente-Methode Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-3018 ER - TY - THES A1 - Rickert, Jörg T1 - Zum Einfluss von Langzeitverzögerern auf der Basis von Phosphonsäure auf die Hydratation einzelner Klinkerphasen, Portlandzementklinker und Portlandzemente T1 - About the influence of long-term retarders on the basis of phosphonic acid on the hydration of several clinker phases, portland cement clinkers and portland cements N2 - Neben dem Schwerpunkt der Verflüssigung werden auch Zusatzmittel benötigt, die extrem lange Verarbeitbarkeitszeiten des Betons ermöglichen. Eine neue Wirkungsgruppe, durch die Verarbeitbarkeitszeiten von über 90 Stunden er-reicht werden können, sind Langzeitverzögerer (LVZ) auf der Basis von Phosphonsäure. In systematischen Versuchen wurden grundlegende Erkenntnisse über die Wirkungsmechanismen von LVZ auf die Hydratation gewonnen. Es hat sich gezeigt, dass die verzögernde Wirkung von LVZ auf die Bildung von schwer löslichem Calciumphosphonat zurückzuführen ist, welches die Partikeloberflächen žabdichtetœ. Vom Angebot an gelöstem Calcium hängt es ab, ob sich das žabdichtendeœ Calciumphosphonat direkt bildet oder ob durch den Calciumanspruch des LVZ eine kurzzeitig verstärkte Hydratation reaktiver Klin-kerphasen hervorgerufen wird. Sulfatoptimierte Zemente wiesen aufgrund der Anteile an Sulfatträger genüge! nd Calcium-Ionen für eine sofortige Bildung von Calciumphosphonat auf. In Verbindung mit der Bildung von primärem Ettringit bildet die Sulfatträgeroptimierung die Grundlage für die erwünschte Wirkungsweise des Zusatzmittels. N2 - In addition to the large group of plasticizing admixtures, such kind of admixtures are required which enable a very long time of workability of concrete. The workability of concrete over a period of more than 90 hours can be achieved by long-term retarders. This new type of admixture is based on phosphonic acid. By systematic investigations profound knowledge about the operative mechanisms of long-term retarders could be drawn. The retarding action is due to a formation of sparingly soluble calcium phosphonate which žseal upœ the particle surface. Whether the addition of long-term retarder leads to an immediate formation of calcium phosphonate or to a short termed acceleration of the hydration of reactive clinker phases depends on the supply of solved calcium. Because of the adjusted calcium sulphate content in cement the concentration of calcium is high enough for an immediate formation of sparingly soluble calcium! phosphonate. In combination with the formation of primary ettringite the calcium sulphate agent is the basis for the desired mode of action of the long-term retarder. KW - Beton KW - Recycling KW - Hydratation KW - Klinker KW - Betonzusatzmittel KW - Betonzusatzmittel KW - Langzeitverzögerer KW - Phosphonocarbonsäure (PBTC) KW - Wirkungsmechanismen KW - Zement KW - concrete admixture KW - long-term retarder KW - phosphonocarbon acid (PBTC) KW - operative mechanisms KW - cement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040211-232 ER - TY - THES A1 - Kurukuri, Srihari T1 - Homogenization of Damaged Concrete Mesostructures using Representative Volume Elements - Implementation and Application to SLang N2 - This master thesis explores an important and under-researched topic on the so-called bridging of length scales (from >meso< to >macro<), with the concept of homogenization in which the careful characterization of mechanical response requires that the developed material model >bridge< the representations of events that occur at two different scales. The underlying objective here is to efficiently incorporate material length scales in the classical continuum plasticity/damage theories through the concept of homogenization theory. The present thesis is devoted to computational modeling of heterogeneous materials, primarily to matrix-inclusion type of materials. Considerations are focused predominantly on the elastic and damage behavior as a response to quasistatic mechanical loading. Mainly this thesis focuses to elaborate a sound numerical homogenization model which accounts for the prediction of overall properties with the application of different types of boundary conditions namely: periodic, homogeneous and mixed type of boundary conditions over two-dimensional periodic and non-periodic RVEs and three-dimensional non-periodic RVEs. Identification of the governing mechanisms and assessing their effect on the material behavior leads one step further. Bringing together this knowledge with service requirements allows for functional oriented materials design. First, this thesis gives attention on providing the theoretical basic mechanisms involved in homogenization techniques and a survey will be made on existing analytical methods available in literature. Second, the proposed frameworks are implemented in the well known finite element software programs ANSYS and SLang. Simple and efficient algorithms in FORTRAN are developed for automated microstructure generation using RSA algorithm in order to perform a systematic numerical testing of microstructures of composites. Algorithms are developed to generate constraint equations in periodic boundary conditions and different displacements applied spatially over the boundaries of the RVE in homogeneous boundary conditions. Finally, nonlinear simulations are performed at mesolevel, by considering continuum scalar damage behavior of matrix material with the linear elastic behavior of aggregates with the assumption of rigid bond between constituents. KW - Schadensmechanik KW - Finite-Elemente-Methode KW - Beton KW - Homogenisierung KW - Repräsentative Volumen Elemente KW - Mesoskala KW - Homogenization KW - Representative Volume Elements KW - Mesoscale Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6670 N1 - Der Volltext-Zugang wurde im Zusammenhang mit der Klärung urheberrechtlicher Fragen mit sofortiger Wirkung gesperrt. ER - TY - THES A1 - Grosse, Marco T1 - Zur numerischen Simulation des physikalisch nichtlinearen Kurzzeittragverhaltens von Nadelholz am Beispiel von Holz-Beton-Verbundkonstruktionen T1 - On the numerical simulation of the nonlinear short-time carrying behaviour of softwood with application to timber-concrete composite structures N2 - In der Arbeit wird ein räumliches Materialmodell für den anisotropen Werkstoff Holz vorgestellt. Dessen Leistungsfähigkeit wird durch Verifikationsrechnungen und die Simulation eigener Versuche aufgezeigt. In diesen Versuchen wurde das Tragverhalten spezieller Schubverbindungselemente der Brettstapel-Beton-Verbundbauweise untersucht. Die Kombination eines Brettstapels mit einer schubfest angeschlossenen Betonplatte ist eine vorteilhafte Möglichkeit, Schnittholz mit geringem Querschnitt effektiv in biegebeanspruchten Bauteilen einzusetzen. Es werden die Ergebnisse der experimentellen Untersuchungen zu den Schubverbindungselementen Flachstahlschloss und Nutverbindung vorgestellt. Diese zeichnen sich durch eine über die gesamte Plattenbreite kontinuierliche Übertragung der Schubkraft per Kontaktpressung aus. Vor allem in Brettstapel-Beton-Verbunddecken werden somit ein sehr hoher Verschiebungsmodul sowie eine eminente Tragfähigkeit erreicht. Um mit numerischen Strukturanalysen die in den Versuchen beobachteten Versagensmechanismen adäquat abbilden und realistische Prognosen für das Tragverhalten von Bauteilen oder Verbindungen treffen zu können, muss das physikalisch nichtlineare Verhalten aller beteiligter Baustoffe in die Berechnungen einbezogen werden. Im Rahmen der Dissertation wurde ein auf der Plastizitätstheorie basierendes Materialmodell für Nadelholz hergeleitet und in das FE-Programm ANSYS implementiert, welches die Mikrostruktur des Holzes als verschmierendes Ersatzkontinuum erfasst. Anhand des anatomischen Aufbaus des inhomogenen, anisotropen und porigen Werkstoffs werden die holzspezifischen Versagensmechanismen und die daraus abgeleiteten konstitutiven Beziehungen erläutert. Das ausgeprägt anisotrope Tragverhalten von Holz ist vor allem durch erstaunliche Duktilität bei Stauchung, sprödes Versagen bei Zug- und Schubbeanspruchung und enorme Festigkeitsunterschiede in den Wuchsrichtungen gekennzeichnet. Die Auswirkungen der größtenteils unabhängig voneinander auftretenden, mikromechanischen Versagensmechanismen auf die Spannungs-Verformungsbeziehungen wurden durch die Formulierung adäquater Ver- resp. Entfestigungsfunktionen in Abhängigkeit der Beanspruchungsmodi erfasst. Das dem Materialmodell zu Grunde liegende mehrflächige Fließkriterium berücksichtigt die Interaktion aller sechs Komponenten des räumlichen Spannungszustandes. Die durchgeführten Verifikations- und Simulationsberechnungen belegen, dass der erarbeitete Ansatz sowohl zur Bewertung des Tragvermögens als auch zur Beurteilung von Riss- bzw. Schädigungsursachen von Holzbauteilen eingesetzt werden kann. Die numerische Simulation eröffnet neue, bisher wenig beachtete Möglichkeiten zur Untersuchung komplexer Holzstrukturen sowie Anschlussdetails und wird sich auf Grund der Aussagekraft und Flexibilität auch im Ingenieurholzbau mehr und mehr gegenüber ausschließlich experimenteller Untersuchung durchsetzen. N2 - In the dissertation a spatial model for the anisotropic, porous material wood is presented. The efficiency of this numerical approach is pointed out by verifying computations and simulations of own experiments. In these tests the load carrying behaviour of special joining techniques for laminated timber concrete composite constructions have been examined. The combination of a laminated timber element with a shear resistant joined concrete slab is a profitable alternative for effectively using lumber with small cross section in bending stressed members. The results of the experimental investigations of flat-steel-lock and notch connection are presented. These are characterised by a load transmission via contact pressure continuously over the entire slab width. Particularly in laminated timber concrete composite ceilings a very stiff load-deflection relationship as well as an eminent load-carrying capacity is reached. To simulate the structural behaviour of members and to model there failure mechanisms it is necessary to take the mechanically nonlinear behaviour in the critical and post critical range of all involved materials into account. For this reason a constitutive material model for timber based on the plasticity theory was implemented in the finite element code ANSYS. The basic multisurface yield criterion considers the interaction of all six components of the spatial stress state. The proposal is furthermore based on the classic continuum mechanics. Therefore, a crack is not described discretely, but by its effect on the stress deformation behaviour. The numerical model reproduces the wood-specific anisotropic, load dependent strengths as well as predominantly independent proceeding of strain hardening and, respectively, softening. The conducted verifications and simulations prove, that the designed approach can be applied to the evaluation of the load-carrying behaviour as well as crack and damage causes of timber components. The numerical simulation opens new potentialities for investigation of complex wooden structures as well as connection details. Compared with expensive experimental studies this procedure will gain more significance due to its expressiveness and flexibility even in timber engineering. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 7 KW - Holzbau KW - Verbundbauweise KW - Beton KW - Nichtlineare Finite-Elemente-Methode KW - Plastizitätstheorie KW - Numerische Mathematik KW - Simulation KW - Nichtlineare Kon KW - Holz-Beton-Verbund KW - HBV KW - Versagensmechanismen KW - Brettstapel KW - timber concrete composite KW - laminated timber Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060215-7725 ER - TY - THES A1 - Heidolf, Thorsten T1 - Zeit- und beanspruchungsabhängiges Tragverhalten von polymermodifiziertem Beton unter mehrfach wiederholter Beanspruchung T1 - Time- and Strain-Dependent Behaviour of Polymer-Modified Concrete with Multifariously Repeated Load N2 - In der vorliegenden Arbeit werden die experimentellen Ergebnisse eigener Untersuchungen an unbewehrtem und bewehrtem polymermodifiziertem Beton unter mehrfach wiederholter Druck- und Zugbeanspruchung vorgestellt und mit den Ergebnissen ähnlicher Versuche an Normalbeton und hochfestem Beton verglichen. Besondere Aufmerksamkeit wird dabei dem Formänderungsverhalten, der Steifigkeitsdegradation und der Energiedissipation sowie dem Kriechverhalten und der Mitwirkung des Betons zwischen den Rissen gewidmet. Die beobachtete signifikante Steifigkeitsdegradation sowie der ausgeprägt nichtlineare Zusammenhang zwischen der viskosen Verformung und der elastischen Stauchung zeigen, dass bei der Analyse der Kriech¬aus¬wirkungen des polymermodifizierten Betons auf das Tragverhalten entsprechender Kon¬struktionen neben den Gebrauchslasten auch die während der Lastgeschichte aufgetretenen maximalen Beanspruchungssituationen sowie die damit verbundenen Strukturveränderungen zu berücksichtigen sind. Auf der Basis der Versuchsergebnisse und der visko-elastisch-plastischen Kontinuumsschädigungstheorie werden rheologische Modelle zur Beschreibung des zeit- und beanspruchungsabhängigen Tragverhaltens von Betonbauteile vorgeschlagen. Die numerische Umsetzung der vorgeschlagenen Modelle erfolgt unter Berücksichtigung des zeitabhängigen Materialverhaltens des Betons auf der Basis des HAMILTON-Prinzips unter Vernachlässigung der Trägheitskräfte. Durch eine zeitliche Diskretisierung kann die Problembeschreibung auf das Prinzip von LAGRANGE vom Minimum des Gesamtpotentials zurückgeführt und als nichtlineare Optimierungsaufgabe formuliert werden. Die Simulation des beanspruchungsabhängigen Tragverhaltens von Stahlbetonverbundquerschnitten verdeutlicht die Qualität und Leistungsfähigkeit der vorgeschlagenen Modellbildung. N2 - The experimental results of the investigations into polymer-modified concrete with multifariously repeated compression or tension load are introduced in the provided work and compared to similar experiments in normal- and high-strength concrete. Special attention is dedicated to the stress-strain relation, the degradation of stiffness and the dissipation of energy as well as the non-linear long-term behaviour and tension-stiffening. Stiffness degradation and non-linear creep of polymer-modified concrete show that maximum strain situations have to be taken into consideration of the behaviour analysis of concrete structures under long-term loading. Based on experimental results and the theory of visco-elastic-plastic continuum damage, rheological models are suggested for the description of the time- and damage-dependent behaviour of reinforced concrete. The numerical concept is based on the HAMILTON-principle. Using time discretisation, mechanical modelling simplifies and can be described as a LAGRANGE-principle concerning minimum of total potential energy. The problem is solved by non-linear optimisation. The efficiency of the suggested model was proven for reinforced concrete cross sections by numerical simulation. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 10 KW - Kriechen KW - Kunstharzmodifizierter Zementbeton KW - Beton KW - Tragverhalten KW - Bruchverhalten KW - Experiment KW - Deformationsverhalten KW - Stoffgesetz KW - nichtlineare Optimierung KW - Simulation KW - Formänderungsenergie KW - Steifigkeitsdegradation KW - Creep KW - damage KW - tension-stiffening KW - dissipation of energy KW - non-linear optimisation Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080102-11753 SN - 978-3-86068-331-2 ER - TY - THES A1 - Tartsch, Enrico T1 - Bewertung der Dauerstandfestigkeit von dampfgehärtetem Porenbeton auf der Grundlage von Kurzzeitversuchen T1 - Prediction of the Sustained Load Strength of Autoclaved Aerated Concrete on a Short-term Basis N2 - Im Rahmen der Arbeit wird das Tragverhalten von dampfgehärtetem Porenbeton unter einachsiger Druckbeanspruchung untersucht. Ziel ist es, einen Zusammenhang zwischen makroskopischen Spannungs-Dehnungs-Beziehungen, beanspruchungsbedingten Strukturänderungen und der Dauerstandfestigkeit herzustellen. Die Dauerstandfestigkeit stellt im Sinne der Arbeit eine elementare Gefügeschwelle dar, durch sie wird das stabile vom instabilen Tragverhalten abgegrenzt. Der Zusammenhang zwischen Strukturänderungen und Spannungs-Dehnungs-Verhalten wird anhand mechanischer Modelle analysiert. Diese Untersuchungen liefern die konzeptionelle Orientierung für die durchzuführenden Laborversuche. Die experimentelle Basis der Arbeit bilden Kurzzeit- und Langzeitversuche an Porenbetonzylindern unter einachsiger Druckbeanspruchung. Es werden Probekörper von drei Porenbetonwerken untersucht. Um den Einfluss der Lastgeschichte aufzuzeigen, wird die Versuchsdauer zwischen einer Sekunde und mehreren Wochen variiert. Die Versuche werden mit unterschiedlichen Lastregimen durchgeführt: sowohl mit monoton gesteigerter Beanspruchung bis zum Versagen bzw. bis zum vorgesehenen Beanspruchungsniveau als auch mit niederzyklischer Beanspruchung. Die Messdaten werden unter Einbeziehung der dreidimensionalen Ansätze der Spannungs- und Deformationstheorie hinsichtlich des sphärischen und des deviatorischen Anteils des Spannungs- und Verformungszustandes ausgewertet. Diese auf die separate Betrachtung der Volumen- und Gestaltänderung gestützte Auswertung liefert zusätzliche Erkenntnisse hinsichtlich der Zuordnung von reversiblen und irreversiblen Verformungen zu den Teiltensoräquivalenten. Entsprechend den Versuchsergebnissen ändert sich die Kompressibilität des Porenbetons belastungsabhängig. Bereits kurzzeitige Überlastungen oberhalb der experimentell ermittelten Dauerstandgrenze sind von signifikanten Änderungen der Kompressionssteifigkeit begleitet. Das qualitative Tragverhalten des Porenbetons, das bei Beanspruchungen oberhalb der Dauerstandfestigkeit grundsätzliche Änderungen erfährt, lässt sich so bereits im Kurzzeitversuch abgrenzen. Zusätzliche Auswertungen für Normalbeton und selbstverdichtenden hochfesten Beton weisen auf analoges Verhalten hin. Auf der Basis der durchgeführten Untersuchungen werden Konzepte vorgestellt, mit denen die Dauerstandfestigkeit im Kurzzeitversuch, das heißt mit einer Versuchsdauer von wenigen Stunden, prognostiziert werden kann. Damit können Untersuchungen zur Dauerstandfestigkeit, die eine grundlegende Größe zur Beurteilung der Tragfähigkeit darstellt, routinemäßig durchgeführt werden. N2 - This thesis is concerned with the behaviour of autoclaved aerated concrete (AAC) when it is subjected to uniaxial compressive loads. The objective is to ascertain the relationship between textural changes, macroscopic stress-strain relations and the sustained load strength of the material itself. Throughout the thesis, the sustained load strength is considered as a basic threshold level, i.e. as the boundary between stable and unstable load-bearing behaviour. First, the effect of textural changes on the stress-strain behaviour was analysed on a theoretical basis with the aid of mechanical models. Based on the results, experimental tests were then planned. Short-term as well as long-term tests were carried out using cylindrical specimens made of AAC. Three different types of AAC were tested. Different load histories were used: monotonically increased loads and low-cycle loads with the load level increased step by step. Within the context of the test data analysis, three-dimensional textural responses are taken into account. Uniaxial loading is regarded as a special case of multi-axial loading. The decomposition of the stress tensor and strain tensor respectively opens up the opportunity to obtain more detailed information about elastic and inelastic material properties. It can be shown that compressibility of AAC undergoes load-dependent changes. Even short-term overloads lead to significant textural changes; these can be detected by analysing the bulk modulus. On this basis, it is possible to give clear statements about the sustained load strength of AAC. Additional tests carried out on normal-strength concrete and self-compacting concrete display similar behaviour. This study outlines a way of predicting sustained load strength on a short-term basis. As a result, it will be possible to carry out routine investigations into the sustained load strength in the future. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 12 KW - Porenbeton KW - Beton KW - Tragverhalten KW - Dauerstandfestigkeit KW - Bruchverhalten KW - Experiment KW - Deformationsverhalten KW - zyklisch KW - Strukturänderung KW - elastische Eigenschaften KW - sphärisch KW - deviatorisch KW - Kompressibilität KW - textural changes KW - elastic properties KW - spherical KW - deviatoric KW - compressibility Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080213-12926 ER -