TY - CHAP A1 - Dokhanchi, Najmeh Sadat A1 - Arnold, Jörg A1 - Vogel, Albert A1 - Völker, Conrad T1 - Acoustic Travel-Time Tomography: Optimal Positioning of Transceiver and Maximal Sound-Ray Coverage of the Room T2 - Fortschritte der Akustik - DAGA 2019 N2 - Acoustic travel-time tomography (ATOM) determines the distribution of the temperature in a propagation medium by measuring the travel-time of acoustic signals between transmitters and receivers. To employ ATOM for indoor climate measurements, the impulse responses have been measured in the climate chamber lab of the Bauhaus-University Weimar and compared with the theoretical results of its image source model (ISM). A challenging task is distinguishing the reflections of interest in the reflectogram when the sound rays have similar travel-times. This paper presents a numerical method to address this problem by finding optimal positions of transmitter and receiver, since they have a direct impact on the distribution of travel times. These optimal positions have the minimum number of simultaneous arrival time within a threshold level. Moreover, for the tomographic reconstruction, when some of the voxels remain empty of sound-rays, it leads to inaccurate determination of the air temperature within those voxels. Based on the presented numerical method, the number of empty tomographic voxels are minimized to ensure the best sound-ray coverage of the room. Subsequently, a spatial temperature distribution is estimated by simultaneous iterative reconstruction technique (SIRT). The experimental set-up in the climate chamber verifies the simulation results. KW - Bauphysik KW - Acoustic Travel-Time Tomography KW - Bauklimatik KW - Akustische Tomographie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190408-38778 UR - https://www.dega-akustik.de/publikationen/online-proceedings/ N1 - This conference paper has been submitted to the DAGA 2019. Thus, the original paper first is published in the "Fortschritte der Akustik - DAGA 2019" ER - TY - CHAP A1 - Abrahamczyk, Lars A1 - Schwarz, Jochen T1 - Forecast Engineering: From Past Design to Future Decision 2017 N2 - The design of engineering structures takes place today and in the past on the basis of static calculations. The consideration of uncertainties in the model quality becomes more and more important with the development of new construction methods and design requirements. In addition to the traditional forced-based approaches, experiences and observations about the deformation behavior of components and the overall structure under different exposure conditions allow the introduction of novel detection and evaluation criteria. The proceedings at hand are the result from the Bauhaus Summer School Course: Forecast Engineering held at the Bauhaus-Universität Weimar, 2017. It summarizes the results of the conducted project work, provides the abstracts of the contributions by the participants, as well as impressions from the accompanying programme and organized cultural activities. The special character of this course is in the combination of basic disciplines of structural engineering with applied research projects in the areas of steel and reinforced concrete structures, earthquake and wind engineering as well as informatics and linking them to mathematical methods and modern tools of visualization. Its innovative character results from the ambitious engineering tasks and advanced modeling demands. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 00 KW - Proceedings KW - Ingenieurbau KW - Sommerkurs KW - proceedings KW - summer school KW - Structural Engineering KW - Ingenieurwissenschaften Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191122-40344 ER - TY - CHAP A1 - Abrahamczyk, Lars A1 - Schwarz, Jochen T1 - Forecast Engineering: From Past Design to Future Decision 2018 N2 - Institute of Structural Engineering, Institute of Structural Mechanics, as well as Institute for Computing, Mathematics and Physics in Civil Engineering at the faculty of civil engineering at the Bauhaus-Universität Weimar presented special topics of structural engineering to highlight the broad spectrum of civil engineering in the field of modeling and simulation. The summer course sought to impart knowledge and to combine research with a practical context, through a challenging and demanding series of lectures, seminars and project work. Participating students were enabled to deal with advanced methods and its practical application. The extraordinary format of the interdisciplinary summer school offers the opportunity to study advanced developments of numerical methods and sophisticated modelling techniques in different disciplines of civil engineering for foreign and domestic students, which go far beyond traditional graduate courses. The proceedings at hand are the result from the Bauhaus Summer School course: Forecast Engineering held at the Bauhaus-Universität Weimar, 2018. It summarizes the results of the conducted project work, provides the abstracts/papers of the contributions by the participants, as well as impressions from the accompanying programme and organized cultural activities. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 000 KW - Proceedings KW - Ingenieurbau KW - Ingenieurwissenschaften KW - Sommerkurs KW - Structural Engineering KW - proceedings KW - summer school Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191126-40364 ER - TY - CHAP A1 - Vîlceanu, Victor A1 - Abrahamczyk, Lars A1 - Morgenthal, Guido T1 - Nonlinear Analysis of Structures: Wind Induced Vibrations N2 - The proceedings at hand are the result of the International Master Course Module: "Nonlinear Analysis of Structures: Wind Induced Vibrations" held at the Faculty of Civil Engineering at Bauhaus-University Weimar, Germany in the summer semester 2019 (April - August). This material summarizes the results of the project work done throughout the semester, provides an overview of the topic, as well as impressions from the accompanying programme. Wind Engineering is a particular field of Civil Engineering that evaluates the resistance of structures caused by wind loads. Bridges, high-rise buildings, chimneys and telecommunication towers might be susceptible to wind vibrations due to their increased flexibility, therefore a special design is carried for this aspect. Advancement in technology and scientific studies permit us doing research at small scale for more accurate analyses. Therefore scaled models of real structures are built and tested for various construction scenarios. These models are placed in wind tunnels where experiments are conducted to determine parameters such as: critical wind speeds for bridge decks, static wind coefficients and forces for buildings or bridges. The objective of the course was to offer insight to the students into the assessment of long-span cable-supported bridges and high-rise buildings under wind excitation. The participating students worked in interdisciplinary teams to increase their knowledge in the understanding and influences on the behaviour of wind-sensitive structures. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 0 KW - Ingenieurbau KW - Structural Engineering KW - wind-induced vibration KW - Konstruktiver Ingenieurbau KW - nonlinear analysis KW - Förderungsprogramm KW - Erasmus + Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191122-40337 ER - TY - CHAP A1 - Schirmer, Ulrike A1 - Kleiner, Florian A1 - Osburg, Andrea T1 - Objektive Oberflächenbewertung von (P)SCC-Sichtbeton mittels automatisierter Analyse von Bilddaten T2 - Tagung Bauchemie der GDCH-Fachgruppe Bauchemie, 30. September - 2. Oktober 2019 in Aachen N2 - Sichtbeton ist aufgrund seiner Vielfältigkeit in der Formgebung eines der am meisten verbreiteten Gestaltungsmittel der modernen Architektur und optimal für neue Bauweisen sowie steigende Anforderungen an das Erscheinungsbild öffentlicher Bauwerke geeignet. Die Herstellung qualitativ hochwertiger Sichtbetonoberflächen hängt im hohen Maße von den Wechselwirkungen zwischen Beton und Trennmittel, zwischen Trennmittel und Schalmaterial, sowie von der Applikationsart und -menge des Trennmittels ab. In Laborversuchen wurden diese Einflüsse auf die Sichtbetonoberflächen eines polymermodifizierten selbstverdichtenden Betons (PSCC) im Vergleich zu einem herkömmlichen selbstverdichtenden Beton (SCC) untersucht. Im Rahmen dieser Arbeiten wurde eine Methode zur Beurteilung der Sichtbetonqualität entwickelt, mit welcher Ausschlusskriterien, wie maximale Porosität und Gleichmäßigkeit, objektiv und automatisiert bestimmt werden können. Veränderungen dieser Werte durch Witterungseinflüsse ließen zudem erste Rückschlüsse auf die Dauerhaftigkeit der Sichtbetonoberflächen zu. KW - Sichtbeton KW - Bildanalyse KW - Qualitätskontrolle KW - Sichtbeton KW - Oberflächenanalyse KW - Oberflächenporosität Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211004-45104 SN - 978-3-947197-13-2 N1 - GDCh-Monographie ; Band 54 PB - Gesellschaft Deutscher Chemiker ER - TY - CHAP ED - Abarkan, Abdellah ED - Bihlmaier, Helene ED - Gimeno Sánchez, Andrea ED - Blaga, Andreea T1 - Second urbanHIST Conference. Interpreting 20th Century European Urbanism N2 - urbanHIST (2019). Second urbanHIST Conference. Interpreting 20th Century European Urbanism. Stockholm, 21–23 October 2019 Conference Booklet KW - Städtebau KW - Planung KW - Geschichte KW - Stadtgeschichte KW - urbanHIST KW - planning history KW - urban history Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20201218-43046 CY - Karlskrona ER -