TY - JOUR A1 - Nogueira, Priscilla T1 - “Battlers” and their homes: About self-production of residences made by the brazilian new middle class JF - Social Inclusion N2 - The article presents preliminary results and qualitative analysis obtained from the doctoral research provisory entitled “How do Brazilian ‘battlers’ reside?”, which is in progress at the Institute for European Urban Studies, Bauhaus Univer-sity Weimar. It critically discusses the contradictions of the production of residences in Brazil made by an emerging so-cial group, lately called the Brazilian new middle class. For the last ten years, a number of government policies have provoked a general improvement of the purchasing power of the poor. Between those who completely depend on the government to survive and the upper middle class, there is a wide (about 100 million people) and economically stable lower middle group, which has found its own ways of dealing with its demand for housing. The conventional models of planning, building and buying are not suitable for their technical, financial and personal needs. Therefore, they are con-currently planners, constructors and residents, building and renovating their own properties themselves, but still with very limited education and technical knowledge and restricted access to good building materials and constructive ele-ments, formal technicians, architects or engineers. On the one hand, the result is an informal and more or less autono-mous self-production, with all sorts of technical problems and very interesting and creative spatial solutions to every-day domestic situations. On the other hand, the repercussions for urban space are questionable: although basic infrastructure conditions have improved, building densities are high and green areas are few. Lower middle class neigh-bourhoods present a restricted collective everyday life. They look like storage spaces for manpower; people who live to work in order to be able to consume—and build—what they could not before. One question is, to what extent the lat-est economic rise of Brazil has really resulted in social development for lower middle income families in the private sphere regarding their residences, and in the collective sphere, regarding the neighbourhoods they inhabit and the ur-ban space in general. KW - Brasilien KW - Wohnsitz KW - Mittelstand KW - Brazil; collective; residences; families; neighbourhoods; new middle class; private; self-production; space; urban Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170425-31568 SP - 44 EP - 61 ER - TY - THES A1 - Nguyen, Manh Hung T1 - µ-Hyperholomorphic Function Theory in R³: Geometric Mapping Properties and Applications N2 - This thesis applies the theory of \psi-hyperholomorphic functions dened in R^3 with values in the set of paravectors, which is identified with the Eucledian space R^3, to tackle some problems in theory and practice: geometric mapping properties, additive decompositions of harmonic functions and applications in the theory of linear elasticity. KW - mathematics KW - harmonic KW - quaternion KW - elasticity KW - geometry KW - Mathematik Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20150817-24477 ER - TY - THES A1 - Schütz, Stephan T1 - Von der Faser zum Haus : Das Potential von gefalteten Wabenplatten aus Papierwerkstoffen in ihrer architektonischen Anwendung N2 - Der vorliegende Text beschreibt die intensive Erforschung von Wabenplatten aus Papierwerkstoffen, die durch Faltprozesse neue räumliche Zustände einnehmen können und somit ihr ursprüngliches Anwendungsspektrum erweitern. Die gezeigten Lösungsansätze bewegen sich dabei im Spannungsfeld von Architektur und Ingenieurbau, denn die gefalteten Bauteile sind nicht nur äußerst tragfähig sondern besitzen auch eine ästhetische Form. Die entwickelten Verfahren und Konstruktionen werden auf einem hohen architektonischen Niveau präsentiert und mit einfachen ingenieurtechnischen Methoden verifiziert. Zur Lösungsfindung werden geometrische Verfahren ebenso angewendet wie konstruktive Faustformeln und Recherchen aus Architektur und Forschung. Der Fokus der Arbeit liegt auf der Untersuchung von Faltungen in Wabenplatten. Während der Auseinandersetzung mit der Thematik erschienen jedoch viele weitere Aspekte als sehr interessant und bearbeitungswürdig. Als theoretische Grundlage dieser Arbeit werden deshalb die geschichtliche Entwicklung und die gesellschaftliche Bedeutung von Papier und Papierwerkstoffen analysiert und deren Produktionsprozesse beleuchtet. Diese Vorgehensweise ermöglicht eine Einordnung des Potentials und der Bedeutung des Werkstoffs Papier. Der Kontext der Arbeit wird dadurch gestärkt und führt zu interessanten zukünftigen Forschungsansätzen. Intensive Untersuchungen widmen sich der geometrischen Bestimmung von Faltungen in Wabenplatten aus Papierwerkstoffen sowie deren Manifestation als konstruktive Bauteile. Auch die statischen Eigenschaften der Elemente und ihr Konstruktionspotential werden erforscht und aufbereitet. Wichtige Impulse aus Forschung und Technik fließen in die Recherche der Arbeit ein und erlauben die Verortung der Ergebnisse im architektonischen Kontext. Versuchsreihen und Materialstudien an Prototypen belegen die Ergebnisse virtueller und rechnerischer Studien. Konzepte zur parametrischen Berechnung und Visualisierung der Forschungsergebnisse werden präsentiert und zeigen zukunftsfähige Planungshilfen für die Industrie auf. Etliche Testreihen zu unterschiedlichsten Abdichtungskonzepten führen zur Realisierung eines sehenswerten Experimentalbaus. Er erlaubt die dauerhafte Untersuchung der entwickelten Bauteile unter realistischen Bedingungen und bestätigt deren Leistungsfähigkeit. Dadurch wird nicht nur ein dauerhaftes Monitoring und eine Evaluierung der Leistungsdaten möglich sondern es wird auch der sichtbare Beweis erbracht, dass mit Papierwerkstoffen effiziente und hochwertige Architekturen zu realisieren sind, welche das enorme gestalterische Potential von gefalteten Wabenplatten ausnutzen. T3 - bauhaus.ifex research series - 1 KW - Tragendes Teil KW - Platte KW - Sandwichbauteil KW - Papierware KW - Wellpappe KW - Faltung KW - Architektur KW - Konstruktion KW - Bauteil KW - Leichtbau Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181010-38044 ER - TY - THES A1 - Krtschil, Anna T1 - Vergleich verschiedener Indikatoren in Bezug auf die Ökobilanz von Gebäuden N2 - Im Rahmen der Bachelorarbeit werden zwei Indikatoren zur Auswertung einer Ökobilanz gegenübergestellt. Die Umweltbelastungspunkte der Schweiz werden mit dem niederländischen ReCiPe verglichen. KW - Umweltbilanz KW - Ökobilanz KW - Umweltbelastungspunkte KW - ReCiPe KW - GaBi Software Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20150716-24340 ER - TY - CHAP A1 - Khristich, Dmitrii A1 - Astapov, Yuri ED - Gürlebeck, Klaus ED - Lahmer, Tom T1 - VARIATIONAL POSITING AND SOLUTION OF COUPLED THERMOMECHANICAL PROBLEMS IN A REFERENCE CONFIGURATION T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar N2 - Variational formulation of a coupled thermomechanical problem of anisotropic solids for the case of non-isothermal finite deformations in a reference configuration is shown. The formulation of the problem includes: a condition of equilibrium flow of a deformation process in the reference configuration; an equation of a coupled heat conductivity in a variational form, in which an influence of deformation characteristics of a process on the temperature field is taken into account; tensor-linear constitutive relations for a hypoelastic material; kinematic and evolutional relations; initial and boundary conditions. Based on this formulation several axisymmetric isothermal and coupled problems of finite deformations of isotropic and anisotropic bodies are solved. The solution of coupled thermomechanical problems for a hollow cylinder in case of finite deformation showed an essential influence of coupling on distribution of temperature, stresses and strains. The obtained solutions show the development of stressstrain state and temperature changing in axisymmetric bodies in the case of finite deformations. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Building Information Modeling KW - Computerunterstütztes Verfahren KW - Data, information and knowledge modeling in civil engineering; Function theoretic methods and PDE in engineering sciences; Mathematical methods for (robotics and) computer vision; Numerical modeling in engineering; Optimization in engineering applications Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28091 SN - 1611-4086 ER - TY - CHAP A1 - Macedo, Joaquim Miguel A1 - Benta, Agostinho A1 - Picado-Santos, Luis ED - Gürlebeck, Klaus ED - Lahmer, Tom T1 - USE OF MICROSIMULATION IN THE ADAPTATION TO PORTUGAL OF THE HCM 2000 METHODOLOGY FOR BASIC FREEWAY SEGMENTS T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar N2 - Portugal is one of the European countries with higher spatial and population freeway network coverage. The sharp growth of this network in the last years instigates the use of methods of analysis and the evaluation of their quality of service in terms of the traffic performance, typically performed through internationally accepted methodologies, namely that presented in the Highway Capacity Manual (HCM). Lately, the use of microscopic traffic simulation models has been increasingly widespread. These models simulate the individual movement of the vehicles, allowing to perform traffic analysis. The main target of this study was to verify the possibility of using microsimulation as an auxiliary tool in the adaptation of the methodology by HCM 2000 to Portugal. For this purpose, were used the microscopic simulators AIMSUN and VISSIM for the simulation of the traffic circulation in the A5 Portuguese freeway. The results allowed the analysis of the influence of the main geometric and traffic factors involved in the methodology by HCM 2000. In conclusion, the study presents the main advantages and limitations of the microsimulators AIMSUN and VISSIM in modelling the traffic circulation in Portuguese freeways. The main limitation is that these microsimulators are not able to simulate explicitly some of the factors considered in the HCM 2000 methodology, which invalidates their direct use as a tool in the quantification of those effects and, consequently, makes the direct adaptation of this methodology to Portugal impracticable. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Building Information Modeling KW - Computerunterstütztes Verfahren KW - Data, information and knowledge modeling in civil engineering; Function theoretic methods and PDE in engineering sciences; Mathematical methods for (robotics and) computer vision; Numerical modeling in engineering; Optimization in engineering applications Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28122 SN - 1611-4086 ER - TY - CHAP ED - Bauhaus-Institut für Geschichte und Theorie der Architektur und Planung, T1 - Urban Design for Mussolini, Stalin, Salazar, Hitler and Franco During the Interwar Period N2 - Urban design played a central role for the European dictatorships during the 20th century, it served to legitimate the regime, to produce agreement, to demonstrate power, efficiency and speed, it communicated the social, as well as design projects, of the dictatorial regimes domestically and internationally, it tied old experts, as well as new, to the regime. Dictatorial urban design also played an important role after the fall of the dictatorships: It became the object of structural and verbal handling strategies: of demolition, of transformation, of reconstruction, of forgetting, of suppressing, of re-interpretation and of glorification. The topic area is, therefore, both historical and relevant to the present day. The discussion of the topic area is, like it or not, always embedded in the present state of societal engagement with dictatorships. In order to even be able to discuss all of these aspects, different conceptual decisions are necessary. In retrospect, these may seem to many as self-evident, although they are anything but. Our thesis is that there are three methodological imperatives, especially, which allow an expanded approach to the topic area “urban design and dictatorship”. First and above all, the tunnel view, focused on individual dictatorships and neglecting the international dimension, must be overcome. Second, the differences in urban design over the course of a dictatorship, through an appropriate periodisation, should be emphasised. Third, we must strive for an open, flexible, but complex concept of urban design. The main focus lies on the urban design of the most influential dictatorships of the first half of the 20th century: Soviet Union, Fascist Italy and Nazi Germany, including the urban design of the autarky periods in Portugal and Spain. After all, urban design is not just a product of specific historic circumstances. It is a form that continues to have long-term effects, which demonstrates its usefulness and adaptability throughout this process. The urban design products undoubtedly still recall the dictatorial rule under which they were created. However, they are more than a memory space. They are also a living space of the present. They can and should be discussed with respect to their spatial and functional utility for today and tomorrow. Such a perspective is a given for the citizens of a city, but also for city marketing, having marvellous consequences. Only when we do not exclude this dimension a priori, even in academic discussions, can we do justice to the products of dictatorships. And finally, the view of the urban design of dictatorships can and must contribute to the questioning of simplified and naive conceptions of dictatorships. With urban design in mind, we can observe how dictatorships work and how they were able to prevail. In Europe, these questions are of the highest actuality. KW - Urbanism KW - Dictatorship KW - Europe KW - Urbanität Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20150323-23746 ER - TY - CHAP A1 - Kersten, Jens A1 - Rodehorst, Volker ED - Gürlebeck, Klaus ED - Lahmer, Tom T1 - TOWARDS STEREO VISION- AND LASER SCANNER-BASED UAS POSE ESTIMATION T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar N2 - A central issue for the autonomous navigation of mobile robots is to map unknown environments while simultaneously estimating its position within this map. This chicken-eggproblem is known as simultaneous localization and mapping (SLAM). Asctec’s quadrotor Pelican is a powerful and flexible research UAS (unmanned aircraft system) which enables the development of new real-time on-board algorithms for SLAM as well as autonomous navigation. The relative UAS pose estimation for SLAM, usually based on low-cost sensors like inertial measurement units (IMU) and barometers, is known to be affected by high drift rates. In order to significantly reduce these effects, we incorporate additional independent pose estimation techniques using exteroceptive sensors. In this article we present first pose estimation results using a stereo camera setup as well as a laser range finder, individually. Even though these methods fail in few certain configurations we demonstrate their effectiveness and value for the reduction of IMU drift rates and give an outlook for further works towards SLAM. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Building Information Modeling KW - Computerunterstütztes Verfahren KW - Data, information and knowledge modeling in civil engineering; Function theoretic methods and PDE in engineering sciences; Mathematical methods for (robotics and) computer vision; Numerical modeling in engineering; Optimization in engineering applications Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28072 SN - 1611-4086 ER - TY - CHAP A1 - Jaouadi, Zouhour A1 - Lahmer, Tom ED - Gürlebeck, Klaus ED - Lahmer, Tom T1 - Topology optimization of structures subjected to multiple load cases by introducing the Epsilon constraint method T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar N2 - A topology optimization method has been developed for structures subjected to multiple load cases (Example of a bridge pier subjected to wind loads, traffic, superstructure...). We formulate the problem as a multi-criterial optimization problem, where the compliance is computed for each load case. Then, the Epsilon constraint method (method proposed by Chankong and Haimes, 1971) is adapted. The strategy of this method is based on the concept of minimizing the maximum compliance resulting from the critical load case while the other remaining compliances are considered in the constraints. In each iteration, the compliances of all load cases are computed and only the maximum one is minimized. The topology optimization process is switching from one load to another according to the variation of the resulting compliance. In this work we will motivate and explain the proposed methodology and provide some numerical examples. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Building Information Modeling KW - Computerunterstütztes Verfahren KW - Data, information and knowledge modeling in civil engineering; Function theoretic methods and PDE in engineering sciences; Mathematical methods for (robotics and) computer vision; Numerical modeling in engineering; Optimization in engineering applications Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28042 SN - 1611-4086 ER - TY - JOUR A1 - Schuch, Kai T1 - Theoretische Modelle zur Beschreibung des Aggregationsprozesses von wässrigen Alkalisilikatsolen (Wasserglas) durch spezielle Gelinitiatoren zum Aufbau von stabilen silikatischen Schichtmaterialien JF - Steuerung des Aggregationsprozesses in wässrigen Alkalisilikatsolendurch spezielle Gelinitiatoren und moderate Wärmebehandlung zum Aufbau einer stabilen Silikatbeschichtung N2 - In dem Artikel werden die theoretischen Modelle und die Zusammenfassung aus der Dissertation von Kai Schuch, Bauhaus Universität Weimar 2014, zusammengeführt. KW - Wasserglas KW - Beschichtung KW - Silikat KW - Bindemittel KW - Alkalisilikat KW - Wasserglas KW - Alkalislikat KW - Perkolationstheorie KW - DLVO-Theorie KW - Silikatbeschichtung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20151123-24807 ER -