TY - JOUR A1 - Donath, Dirk T1 - Virtuelle Architektur als reale Architektur : ... Techniken und Umfeld der Entwurfsunterstützung mittels VR N2 - Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien' T3 - Thesis // Bauhaus-Universität - 43.1997,1-2/219-229 KW - Architektur KW - Bauentwurf KW - Virtuelle Realität KW - Bauhaus-Kolloquium KW - Weimar KW - 1996 Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-11756 ER - TY - JOUR A1 - Colomina, Beatriz T1 - Skinless architecture N2 - Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung' T3 - Thesis // Bauhaus-Universität - 49.2003,3/123-124 KW - Architektur KW - Medien KW - CAD KW - Virtuelle Realität KW - Bauhaus-Kolloquium KW - Weimar KW - 2003 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080304-13222 ER - TY - THES A1 - Blickling, Arno T1 - Spezifikation des Bau-Solls durch interaktive Modellierung auf virtuellen Baustellen T1 - Job Description by Interactive Production Modeling on Virtual Construction Sites N2 - Heutige Methoden zur Soll-Spezifikation von Bauleistungen (Kostenermittlung und zeitliche Ablaufplanung) gehen von einer abstrahierten und vereinfachten Betrachtung der Zusammenhänge bei Bauprojekten aus. Leistungsverzeichnisse, Kostenermittlungen und Bauzeitpläne orientieren sich nur indirekt an der Geometrie des Bauwerks und der Baustelle. Die dabei verwendeten Medien wie Papier, 2D-Dateien, digitale Leistungsbeschreibungen oder 3D-Darstellungen lassen die Suche nach Informationen auf der Baustelle zu einem zeitaufwändigen und in Anbetracht existierender Medientechnologien ineffizienten Prozess werden. Interaktive virtuelle Umgebungen erlauben die Auflösung starrer Zusammenhänge durch interaktive Eingriffe des Anwenders und visualisieren komplexe bauproduktionstechnische Vorgänge. Das Konzept der visuellen interaktiven Simulation der Bauproduktion sieht vor, die Soll-Spezifikation anhand eines interaktiven 3D-Modells zu entwickeln, um räumliche Veränderungen und parallele Prozesse auf der virtuellen Baustelle im Rahmen der Entscheidungsfindung zum Bauablauf besser berücksichtigen zu können. Verlangt man einen hohen Grad an Interaktivität mit dem 3D-Modell, dann bieten sich Computerspieltechnologien sehr gut zu Verifikationszwecken an. Die visuelle interaktive Simulation der Bauproduktion ist damit als eine 3D-modellbasierte Methode der Prozessmodellierung zu verstehen, die Entscheidungen als Input benötigt und die Kostenermittlung sowie die zeitliche Ablaufplanung als Output liefert. N2 - Current methods for the description of construction works presume a high abstraction level to simplify the constraints between single processes of a process model. The determination of costs together with the specification of a time schedule form the primary components (to-be-built) of this description. Cost estimations, bills of quantities and bar charts are not directly connected to the geometry of the product nore of the construction site. The used media like paper, 2D-files or – in best case scenarios – 3D pictures lead us to a time-consuming information retrieval on the site. Considering modern media technologies these processes are inefficient and demand for alternative scenarios based on 3D-models. In this work a concept for interaction with a virtual construction site is presented. The user can interact with objects on the site in such a way that he initiates the execution of single process steps in the complex production model of the site. The approach to visual interactive simulation (VIS) leads to a to-be-built specification of construction works (determination of costs and 4D-model). Thus spatial changes and parallel processes can be considered when modeling the construction sequence on the virtuel site. If one requirement of the solution is a high level of interactivity between the user and the model then game development engines are a suitable tool for the verification of the approach. This work integrates tendering issues with cost estimation and 4D-modeling in order to develop an interactive method for the simulation of construction works. This simulation approach is based on the 3D-model of the site and requires human-based decisions as an input while delivering costs and a 4D-model on a high level of detail as an output. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 13 KW - Virtuelle Realität KW - Bauablauf KW - interaktiv KW - Stuttgart / Sonderforschungsbereich Rechnergestützte Modellierung und Simulation zur Analyse KW - Bausoll KW - interactive KW - simulation KW - job description KW - sequence KW - cost estimation KW - Kalkulation Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20061105-8311 ER - TY - CHAP A1 - Bimber, Oliver T1 - Projector-Based Augmentation T2 - Emerging Technologies of Augmented Reality: Interfaces & Design N2 - Projector-based augmentation approaches hold the potential of combining the advantages of well-establishes spatial virtual reality and spatial augmented reality. Immersive, semi-immersive and augmented visualizations can be realized in everyday environments – without the need for special projection screens and dedicated display configurations. Limitations of mobile devices, such as low resolution and small field of view, focus constrains, and ergonomic issues can be overcome in many cases by the utilization of projection technology. Thus, applications that do not require mobility can benefit from efficient spatial augmentations. Examples range from edutainment in museums (such as storytelling projections onto natural stone walls in historical buildings) to architectural visualizations (such as augmentations of complex illumination simulations or modified surface materials in real building structures). This chapter describes projector-camera methods and multi-projector techniques that aim at correcting geometric aberrations, compensating local and global radiometric effects, and improving focus properties of images projected onto everyday surfaces. KW - Erweiterte Realität KW - Virtuelle Realität KW - Projektionsverfahren KW - CGI KW - Bildbasiertes Rendering KW - Rendering KW - Projektor-Kamera Systeme KW - Multi-Projektor Systeme KW - projector-camera systems KW - multi-projector systems KW - spatial augmented reality Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7353 ER - TY - THES A1 - Beck, Stephan T1 - Immersive Telepresence Systems and Technologies N2 - Modern immersive telepresence systems enable people at different locations to meet in virtual environments using realistic three-dimensional representations of their bodies. For the realization of such a three-dimensional version of a video conferencing system, each user is continuously recorded in 3D. These 3D recordings are exchanged over the network between remote sites. At each site, the remote recordings of the users, referred to as 3D video avatars, are seamlessly integrated into a shared virtual scenery and displayed in stereoscopic 3D for each user from his or her perspective. This thesis reports on algorithmic and technical contributions to modern immersive telepresence systems and presents the design, implementation and evaluation of the first immersive group-to-group telepresence system in which each user is represented as realistic life-size 3D video avatar. The system enabled two remote user groups to meet and collaborate in a consistent shared virtual environment. The system relied on novel methods for the precise calibration and registration of color- and depth- sensors (RGBD) into the coordinate system of the application as well as an advanced distributed processing pipeline that reconstructs realistic 3D video avatars in real-time. During the course of this thesis, the calibration of 3D capturing systems was greatly improved. While the first development focused on precisely calibrating individual RGBD-sensors, the second stage presents a new method for calibrating and registering multiple color and depth sensors at a very high precision throughout a large 3D capturing volume. This method was further refined by a novel automatic optimization process that significantly speeds up the manual operation and yields similarly high accuracy. A core benefit of the new calibration method is its high runtime efficiency by directly mapping from raw depth sensor measurements into an application coordinate system and to the coordinates of its associated color sensor. As a result, the calibration method is an efficient solution in terms of precision and applicability in virtual reality and immersive telepresence applications. In addition to the core contributions, the results of two case studies which address 3D reconstruction and data streaming lead to the final conclusion of this thesis and to directions of future work in the rapidly advancing field of immersive telepresence research. N2 - In modernen 3D-Telepresence-Systemen werden die Nutzer realistisch dreidimensional repräsentiert und können sich in einer gemeinsamen virtuellen Umgebung treffen. Da sich die Nutzer gegenseitig realistisch sehen können, werden Limitierungen von herkömmlichen zweidimensionalen Videokonferenzsystemen überwunden und neue Möglichkeiten für die Kollaboration geschaffen. Für die Realisierung eines immersiven Telepresence-Systems wird jeder Nutzer kontinuierlich in 3D aufgenommen und als sogenannter 3D-Video-Avatar rekonstruiert. Die 3D-Video-Avatare werden über eine Netzwerkverbindung zwischen den entfernten Orten ausgetauscht, auf jeder Seite in eine gemeinsame virtuelle Szene integriert und für jeden Nutzer perspektivisch korrekt dreidimensional angezeigt. Diese Arbeit trägt algorithmisch und technisch zur aktuellen Forschung im Bereich 3D-Telepresence bei und präsentiert das Design, die Implementierung und die Evaluation eines neuen immersiven Telepresence-Systems. Benutzergruppen können sich dadurch zum ersten Mal von unterschiedlichen Orten in einer konsistenten gemeinsamen virtuellen Umgebung treffen und als realistische lebensgroße 3D-Video-Avatare sehen. Das System basiert auf neu entwickelten Methoden, welche die präzise Kalibrierung und Registrierung von mehreren Farb- und Tiefenkameras in ein gemeinsames Koordinatensystem ermöglichen, sowie auf einer neu entwickelten verteilten Prozesskette, welche die realistische Rekonstruktion von 3D-Video-Avataren in Echtzeit ermöglicht. Im Rahmen dieser Arbeit wurde die Kalibrierung von 3D-Aufnahmesystemen, die auf mehreren Farb- und Tiefenkameras basieren, deutlich verbessert. Eine erste Entwicklung konzentrierte sich auf die präzise Kalibrierung und Registrierung ein- zelner Tiefenkameras. Eine wesentliche Neuentwicklung ermöglicht es, mehrere Farb- und Tiefenkameras mit sehr hoher Genauigkeit innerhalb eines großen 3D-Aufnahmebereichs volumetrisch zu kalibrieren und in ein übergeordnetes Koordinatensystem zu registrieren. Im Laufe der Arbeit wurde die notwendige Nutzerinteraktion durch ein automatisches Optimierungsverfahren deutlich verringert, was die Kalibrierung von 3D-Aufnahmesystemen innerhalb weniger Minuten mit hoher Genauigkeit ermöglicht. Ein wesentlicher Vorteil dieser neuen volumetrischen Kalibrierungsmethode besteht darin, dass gemessene Tiefenwerte direkt in das Koordinatensystem der Anwendung und in das Koordinatensystem der korrespondierenden Farbkamera abgebildet werden. Insbesondere sind während der Anwendungslaufzeit keine Berechnungen zur Linsenentzerrung nötig, da diese bereits implizit durch die volumetrische Kalibrierung ausgeglichen sind. Das in dieser Arbeit entwickelte immersive Telepresence-System hebt sich von verwandten Arbeiten ab. Der durch das System geschaffene virtuelle Begegnungsraum ermöglicht natürliche Interaktionsformen, wie zum Beispiel Gestik oder Mimik, und bietet gleichzeitig etablierte Interaktionstechniken der Virtuellen Realität, welche die gemeinsame Exploration und Analyse von 3D-Inhalten unterstützen. Die in dieser Arbeit neu entwickelte Kalibrierungsmethode stellt eine effiziente Lösung hinsichtlich Genauigkeit und Flexibilität für Virtual-Reality- und moderne 3D-Telepresence-Anwendungen dar. Zusätzlich zu den vorgestellten Entwicklungen tragen die Ergebnisse zweier Fallstudien im Bereich 3D-Rekonstruktion und Netzwerkübertragungzu dieser Arbeit bei und unterstützen Vorschläge und Ausblicke für zukünftige Entwicklungen im fortschreitenden Gebiet der 3D-Telepresence-Forschung. KW - Virtuelle Realität KW - Telepräsenz KW - Mensch-Maschine-Kommunikation KW - Tiefensensor KW - Camera Calibration KW - Depth Camera KW - 3D Telepresence KW - Virtual Reality Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190218-38569 ER - TY - JOUR A1 - Bargstädt, Hans-Joachim A1 - Blickling, Arno T1 - Effective cost estimate and construction processes with 3D interactive technologies: Towards a virtual world of construction sites N2 - The development of 3D technologies during the last decades in many different areas, leads us towards the complete 3D representation of planet earth on a high level of detail. On the lowest level we have geographical information systems (GIS) representing the outer layer of our planet as a 3D model. In the meantime these systems do not only give a geographical model but also present additional information like ownership, infrastructure and others that might be of interest for the construction business. In future these systems will serve as basis for virtual environments for planning and simulation of construction sites. In addition to this work is done on the integration of GIS systems with 3D city models in the area of urban planning and thus integration of different levels of detail. This article presents research work on the use of 3D models in construction on the next level of detail below the level of urban planning. The 3D city model is taken as basis for the 3D model of the construction site. In this virtual nD-world a contractor can organize and plan his resources, simulate different variants of construction processes and thus find out the most effective solution for the consideration of costs and time. On the basis of former researches the authors present a new approach for cost estimation and simulation using development technologies from game software. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Baubetrieb KW - Baustelle KW - Virtuelle Realität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2320 ER - TY - JOUR A1 - Bargstädt, Hans-Joachim A1 - Blickling, Arno T1 - Determination of process durations on virtual construction sites N2 - The paper analyses the application of 3D gaming technologies in the simulation of processes associated with human resources and machinery on construction sites in order to determine process costs. It addresses the problem of detailing in process simulation. The authors outline special boundary conditions for the simulation of cost-relevant resource processes on virtual construction sites. The approach considers different needs for detailing in process simulation during the planning and building phase. For simulation of process costs on a construction site (contractors view) the level of detail has to be set to high. A prototype for determination of process durations (and hereby process costs) developed at the Bauhaus University Weimar is presented as a result of ongoing researches on detailing in process simulation. It shows the method of process cost determination on a high level of detail (game between excavator and truck) through interaction with the virtual environment of the site. KW - Prozesssimulation KW - Virtuelle Realität KW - Kalkulation KW - Kalkulationsverfahren KW - Computerspiel KW - Game Engine KW - QUEST3D KW - Prozesslogik KW - Baumaschinen KW - virtuelle Baustelle KW - game engine KW - virtual construction site Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6207 ER - TY - CHAP A1 - Bargstädt, Hans-Joachim A1 - Ailland, Karin T1 - CONVR 2011 : Proceedings of the 11th International Conference on Construction Applications of Virtual Reality N2 - Proceedings of the 11th International Conference on Construction Applications of Virtual Reality T3 - Schriften der Professur Baubetrieb und Bauverfahren - 21 KW - Plant Simulation KW - Simulation KW - Virtuelle Realität KW - Visualisierung KW - Informationssystem KW - Design visualization KW - Construction visualization KW - Building information modelling KW - Simulation in construction KW - Virtual reality Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111102-15603 SN - 978-3-86068-458-0 ER - TY - CHAP A1 - Bannwart, E. T1 - "CyberCity" - die Stadt im Kopf N2 - >CyberCity< ist ein Konzept, das durch ein virtuelles Abbild der räumlichen Realität einer Stadt (Berlin) eine uns bekannte Wahrnehmungsumgebung als Orientierungs- und Navigationserleichterung bereitstellt, um über diesen virtuellen Browser möglichst schnell und anschaulich an eine gewünschte Information zu kommen. Dieses Umgebungsmodell ist auch als Simulationsmodell für die Visualisierung stadträumlicher Beurteilungen neuer Projekte, verkehrstechnischer Massnahmen und ökologischer Belastungen geeignet. Insbesondere ist es als Orientierungsumgebung für die Telepräsenz über die Kommunikationsnetze gedacht, die über die virtuellen Repräsentanten (Avatare) eine besondere gesellschaftliche Brisanz erhält. KW - Stadtplanung KW - Virtuelle Realität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4247 ER -