TY - CHAP A1 - Sirtl, Christin A1 - Kraus, Matthias T1 - Bonding Quality of Joined Glass Components Exposed to UV and Fluidic Influences N2 - Components of structural glazing have to meet different requirements and resist various impacts, depending on the field of application. Within an international research project of the EU innovation program Horizon 2020, special glass panes with a fluid circulating in capillaries are developed exploiting solar energy. Major influences to this glazing are UV irradiation and the fluidic contact, effecting the mechanical and optical durability of the bonding material within the glass setup. Regarding to visual requirements, acrylate adhesives and EVA films are analyzed as possible bonding materials by destructive and non-destructive testing methods. Two types of specimen are presented for obtaining the mechanical behavior and the surface appearances of the bonding material. KW - Alterung KW - long-term examination KW - material aging KW - climatic loading KW - non-destructive testing KW - destructive testin Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190514-39144 UR - https://onlinelibrary.wiley.com/doi/epdf/10.1002/cepa.940 SN - 978-3-433-03269-5 N1 - Dies ist die Manuskriptfassung zu folgender Veröffentlichung : https://doi.org/10.1002/cepa.940, https://onlinelibrary.wiley.com/doi/full/10.1002/cepa.940 PB - Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG CY - Berlin ER - TY - JOUR A1 - Sirtl, Christin A1 - Hadlich, Christiane A1 - Kraus, Matthias A1 - Osburg, Andrea T1 - Determination of Bonding Failures in Transparent Materials with Non-Destructive Methods – Evaluation of Climatically Stressed Glued and Laminated Glass Compounds JF - World Journal of Engineering and Technology N2 - As part of an international research project – funded by the European Union – capillary glasses for facades are being developed exploiting storage energy by means of fluids flowing through the capillaries. To meet highest visual demands, acrylate adhesives and EVA films are tested as possible bonding materials for the glass setup. Especially non-destructive methods (visual analysis, analysis of birefringent properties and computed tomographic data) are applied to evaluate failure patterns as well as the long-term behavior considering climatic influences. The experimental investigations are presented after different loading periods, providing information of failure developments. In addition, detailed information and scientific findings on the application of computed tomographic analyses are presented. KW - Klebtechnik KW - Non-Destructive Testing KW - Bonding Methods KW - OA-Publikationsfonds2018 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180606-37526 UR - http://www.scirp.org/journal/PaperInformation.aspx?PaperID=84507 VL - 2018 IS - Vol. 6, No 2 SP - 315 EP - 331 ER - TY - THES A1 - Shakir, Masooma Mohib T1 - Reconstructing the Sufi Shrine as a Living Heritage: Case of the Shrine of Shah Abdul Latif Bhitai, Sindh, Pakistan N2 - Living heritage sites are strongly connected to their historical, geographical, socio-political and cultural context. A descriptive narrative of the evolutionary process of the living heritage site of a Sufi shrine is undertaken in this research. It focuses on the changing relationship between the spatial and socio-cultural aspects over time. The larger or macro regional context is interrelated to the micro architectural context. The tangible heritage is defined by and intimately tied to the intangible aspects of the heritage. It is these constituting macro and micro elements and their interrelationships particularly through space and architecture that the research thesis explores in its documentation and analysis. The Sufi shrine in the South Asian Pakistani context is representative of a larger culture in the precolonial era. It is an expression of an indigenous modernity, belonging to a certain time period, place and community. The Sufi shrine as a building type has evolved from the precolonial time period, particularly starting at the golden ages of the Muslim Empire in the world (9th – 12th century), through the colonial age when western modernity arrived until the current neoliberal paradigm within the post independence period. Continued and evolved use of space, ritualistic performances, multiple social groups using the site are various elements whose documentation and analysis can establish the essential co-relations that contribute to continuity of its historical living. Physical and social relation of the historic site to its immediate settlement context is also a significant element that preserves the socio-cultural context. The chosen case of the Shrine of Shah Abdul Latif Bhitai, situated in the small town of Bhitshah in the province of Sindh, Pakistan forms a unique example where the particular physical and socio-cultural environment forms the context within which the Sufi heritage lives and survives. It is well integrated within its context at multiple levels. What are these levels and how do the constituting elements integrate is a major subject of research? These form the background to defining some of the basic issues and questions addressed in this doctoral thesis. Given that living heritage sites are unique due to their particular association to the context, the case study method was used to gain deeper insight and understanding on the topic. KW - Kulturerbe KW - heritage KW - Denkmalpflege Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180719-37708 ER - TY - THES A1 - Schollmeyer, Andre T1 - Efficient and High-Quality Rendering of Higher-Order Geometric Data Representations N2 - Computer-Aided Design (CAD) bezeichnet den Entwurf industrieller Produkte mit Hilfe von virtuellen 3D Modellen. Ein CAD-Modell besteht aus parametrischen Kurven und Flächen, in den meisten Fällen non-uniform rational B-Splines (NURBS). Diese mathematische Beschreibung wird ebenfalls zur Analyse, Optimierung und Präsentation des Modells verwendet. In jeder dieser Entwicklungsphasen wird eine unterschiedliche visuelle Darstellung benötigt, um den entsprechenden Nutzern ein geeignetes Feedback zu geben. Designer bevorzugen beispielsweise illustrative oder realistische Darstellungen, Ingenieure benötigen eine verständliche Visualisierung der Simulationsergebnisse, während eine immersive 3D Darstellung bei einer Benutzbarkeitsanalyse oder der Designauswahl hilfreich sein kann. Die interaktive Darstellung von NURBS-Modellen und -Simulationsdaten ist jedoch aufgrund des hohen Rechenaufwandes und der eingeschränkten Hardwareunterstützung eine große Herausforderung. Diese Arbeit stellt vier neuartige Verfahren vor, welche sich mit der interaktiven Darstellung von NURBS-Modellen und Simulationensdaten befassen. Die vorgestellten Algorithmen nutzen neue Fähigkeiten aktueller Grafikkarten aus, um den Stand der Technik bezüglich Qualität, Effizienz und Darstellungsgeschwindigkeit zu verbessern. Zwei dieser Verfahren befassen sich mit der direkten Darstellung der parametrischen Beschreibung ohne Approximationen oder zeitaufwändige Vorberechnungen. Die dabei vorgestellten Datenstrukturen und Algorithmen ermöglichen die effiziente Unterteilung, Klassifizierung, Tessellierung und Darstellung getrimmter NURBS-Flächen und einen interaktiven Ray-Casting-Algorithmus für die Isoflächenvisualisierung von NURBSbasierten isogeometrischen Analysen. Die weiteren zwei Verfahren beschreiben zum einen das vielseitige Konzept der programmierbaren Transparenz für illustrative und verständliche Visualisierungen tiefenkomplexer CAD-Modelle und zum anderen eine neue hybride Methode zur Reprojektion halbtransparenter und undurchsichtiger Bildinformation für die Beschleunigung der Erzeugung von stereoskopischen Bildpaaren. Die beiden letztgenannten Ansätze basieren auf rasterisierter Geometrie und sind somit ebenfalls für normale Dreiecksmodelle anwendbar, wodurch die Arbeiten auch einen wichtigen Beitrag in den Bereichen der Computergrafik und der virtuellen Realität darstellen. Die Auswertung der Arbeit wurde mit großen, realen NURBS-Datensätzen durchgeführt. Die Resultate zeigen, dass die direkte Darstellung auf Grundlage der parametrischen Beschreibung mit interaktiven Bildwiederholraten und in subpixelgenauer Qualität möglich ist. Die Einführung programmierbarer Transparenz ermöglicht zudem die Umsetzung kollaborativer 3D Interaktionstechniken für die Exploration der Modelle in virtuellenUmgebungen sowie illustrative und verständliche Visualisierungen tiefenkomplexer CAD-Modelle. Die Erzeugung stereoskopischer Bildpaare für die interaktive Visualisierung auf 3D Displays konnte beschleunigt werden. Diese messbare Verbesserung wurde zudem im Rahmen einer Nutzerstudie als wahrnehmbar und vorteilhaft befunden. N2 - In computer-aided design (CAD), industrial products are designed using a virtual 3D model. A CAD model typically consists of curves and surfaces in a parametric representation, in most cases, non-uniform rational B-splines (NURBS). The same representation is also used for the analysis, optimization and presentation of the model. In each phase of this process, different visualizations are required to provide an appropriate user feedback. Designers work with illustrative and realistic renderings, engineers need a comprehensible visualization of the simulation results, and usability studies or product presentations benefit from using a 3D display. However, the interactive visualization of NURBS models and corresponding physical simulations is a challenging task because of the computational complexity and the limited graphics hardware support. This thesis proposes four novel rendering approaches that improve the interactive visualization of CAD models and their analysis. The presented algorithms exploit latest graphics hardware capabilities to advance the state-of-the-art in terms of quality, efficiency and performance. In particular, two approaches describe the direct rendering of the parametric representation without precomputed approximations and timeconsuming pre-processing steps. New data structures and algorithms are presented for the efficient partition, classification, tessellation, and rendering of trimmed NURBS surfaces as well as the first direct isosurface ray-casting approach for NURBS-based isogeometric analysis. The other two approaches introduce the versatile concept of programmable order-independent semi-transparency for the illustrative and comprehensible visualization of depth-complex CAD models, and a novel method for the hybrid reprojection of opaque and semi-transparent image information to accelerate stereoscopic rendering. Both approaches are also applicable to standard polygonal geometry which contributes to the computer graphics and virtual reality research communities. The evaluation is based on real-world NURBS-based models and simulation data. The results show that rendering can be performed directly on the underlying parametric representation with interactive frame rates and subpixel-precise image results. The computational costs of additional visualization effects, such as semi-transparency and stereoscopic rendering, are reduced to maintain interactive frame rates. The benefit of this performance gain was confirmed by quantitative measurements and a pilot user study. KW - Rendering KW - CAD KW - NURBS KW - Computer-Aided Design KW - Isogeometric Analysis KW - Graphics hardware Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181120-38234 ER - TY - THES A1 - Schirmer, Ulrike T1 - Die Adsorption von Dispersionspartikeln und Schutzkolloiden an Oberflächen von Zementphasen und Phasen der Zusatzstoffe N2 - Ziel der Arbeit war das Adsorptionsverhalten ausgewählter schutzkolloidstabilisierter Polymerpartikel mit variierender chemischer Basis im zementären System zu beschreiben und basierend auf den gewonnenen Erkenntnissen das Konkurrenzverhalten beim Angebot unterschiedlicher mineralischer Oberflächen zu klären. Sowohl die Destabilisierung der Polymerpartikel im alkalischen Milieu, welche eine Voraussetzung für derartige Adsorptionsprozesse ist, als auch die Veränderung von Oberflächeneigenschaften verschiedener mineralischer Partikel durch Hydratations- und Ionenadsorptionsprozesse, wurden u. a. mit Hilfe elektrokinetischer Experimente erfasst. Die spektralphotometrische Erstellung von Adsorptionsisothermen ermöglichte zudem die Ermittlung der jeweiligen adsorbierten Polymermenge zu verschiedenen Zeitpunkten der frühen Hydratation. Weiterhin wurde die Polymeradsorption an Partikeln ausgewählter Zusatzstoffe in Abhängigkeit von der Ionenstärke der Flüssigphase beschrieben. Rasterelektronenmikroskopische Untersuchungen cryo-präparierter polymermodifizierter Zementleimproben ermöglichten es außerdem deren Mikrostruktur im suspensiven Zustand zu visualisieren. Diese Aufnahmen, ebenso wie die Ergebnisse grundlegender hydratationskinetischer Untersuchungen wurden in Wechselbeziehung zu den Ergebnissen der Adsorptionsuntersuchungen gebracht. Maßgelbliche intermolekulare und interpartikuläre Wechselwirkungen, infolge derer sich die Stabilitätsverhältnisse im Zementleim ändern und die Polymerpartikel adsorbieren sind im Wesentlichen die Desorption des Schutzkolloids von der Polymerpartikeloberfläche, die Ionisation funktioneller Gruppen der Polymerpartikel und der Schutzkolloidmakromoleküle im alkalischen Milieu und infolgedessen die Komplexbildung mit Ionen der Zementleimporenlösung. Die Auswirkungen dieser Vorgänge auf die Lösungs- und Fällungskinetik des Zementleimes wurden erfasst und mit der chemischen Zusammensetzung der polymeren Systeme korreliert. KW - Kunststoffmörtel KW - Interpartikuläre Wechselwirkungen KW - Suspensionsanalytik KW - Lösungsanalytik KW - Mikroskopie KW - Polymeradsorption KW - Kunststoffadditiv KW - Mikrostruktur KW - Mehrphasensystem Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180327-37383 ER - TY - INPR A1 - Rezakazemi, Mashallah A1 - Mosavi, Amir A1 - Shirazian, Saeed T1 - ANFIS pattern for molecular membranes separation optimization N2 - In this work, molecular separation of aqueous-organic was simulated by using combined soft computing-mechanistic approaches. The considered separation system was a microporous membrane contactor for separation of benzoic acid from water by contacting with an organic phase containing extractor molecules. Indeed, extractive separation is carried out using membrane technology where complex of solute-organic is formed at the interface. The main focus was to develop a simulation methodology for prediction of concentration distribution of solute (benzoic acid) in the feed side of the membrane system, as the removal efficiency of the system is determined by concentration distribution of the solute in the feed channel. The pattern of Adaptive Neuro-Fuzzy Inference System (ANFIS) was optimized by finding the optimum membership function, learning percentage, and a number of rules. The ANFIS was trained using the extracted data from the CFD simulation of the membrane system. The comparisons between the predicted concentration distribution by ANFIS and CFD data revealed that the optimized ANFIS pattern can be used as a predictive tool for simulation of the process. The R2 of higher than 0.99 was obtained for the optimized ANFIS model. The main privilege of the developed methodology is its very low computational time for simulation of the system and can be used as a rigorous simulation tool for understanding and design of membrane-based systems. Highlights are, Molecular separation using microporous membranes. Developing hybrid model based on ANFIS-CFD for the separation process, Optimization of ANFIS structure for prediction of separation process KW - Fluid KW - Simulation KW - Molecular Liquids KW - optimization KW - machine learning KW - Membrane contactors KW - CFD Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181122-38212 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/pii/S0167732218345008, which has been published in final form at https://doi.org/10.1016/j.molliq.2018.11.017. VL - 2018 SP - 1 EP - 20 ER - TY - THES A1 - Piethe, Vivienne T1 - Konfektionierung eines Calciumsulfat-Bindemittelsystems zur Herstellung volumenstabiler Fließestrichmörtel N2 - Bei einem marktüblichen Calciumsulfat-Fließestrich wurden in der Praxis schädigende Volu-menexpansionen festgestellt. Diese sind ein Resultat aus dem Zusammenwirken des einge-setzten Bindemittel-Compounds und einer kritischen Gesteinskörnung. Das Ziel dieser Arbeit ist es, ein Calciumsulfat-Bindemittelsystem zu konfektionieren, welches in der Lage ist, die im Mörtel festgestellten Volumenexpansionen zu unterbinden. Es sollen verschiedene Bindemittel- und Additivzusammensetzungen untersucht werden, welche in Verbindung mit der kritischen Gesteinskörnung die Herstellung eines volumenstabilen Fließestrichs ermöglichen. Dazu soll folgende Fragestellung beantwortet werden: Welche Ursachen hat die Volumenzunahme und wie ist diese zu minimieren bzw. unterbinden? Dabei werden unterschiedliche Bindemittelrezepturen aus α-Halbhydrat, Thermoanhydrit und Naturanhydrit, sowie verschiedene Additivzusammensetzungen hergestellt und untersucht. Durch Längenänderungsmessungen in der Schwindrinne werden die Einflüsse der Binde-mittel, der Additivzusammensetzungen und der Wasser/Bindemittel-Werte auf das Län-genänderungsverhalten untersucht. Mittels Variation der einzelnen Compound-Bestandteile kann festgestellt werden, dass der Stabilisierer die Längenänderung negativ beeinflusst. Dieser bindet freies Wasser, welches für eine Reaktion zwischen Bindemittel und Gesteins-körnung im plastischen Zustand nicht mehr zur Verfügung steht. Diese Reaktion kann folglich erst im erhärteten Zustand ablaufen und verursacht die schädigende Volumenexpansion. Abschließend wurde ein Bindemittel-Compound konfektioniert, welcher ohne Zusatz von Stabilisierern in Zusammenhang mit der kritischen Gesteinskörnung volumenstabil ist und keine Schäden auslöst. KW - Calciumsulfat KW - Gips KW - Fließestrich KW - Volumenstabilität KW - Calciumsulfatfließestrich Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190902-39445 ER - TY - THES A1 - Nguyen, Thai Cuong T1 - Flächen zweiter Ordnung - Dächer müssen nicht eben sein N2 - In dieser Arbeit geht es um die Quadriken in der Ebene und im Raum. Dabei werden die Transformation in die Normalform und die Klassifikation untersucht. Aus den geometrischen Eigenschaften werden einige Anwendungsbeispiele der Quadriken in der Technik und dem alltäglichen Leben vorgestellt. KW - Quadrik KW - Quadrik KW - Kegelschnitt KW - Flächen zweiter Ordnung KW - Hauptachsentransformation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181024-37496 ER - TY - GEN A1 - Nawaz Khan, Shah T1 - Numerical analysis of deformation and stability in the formation for railway tracks N2 - Over the past few decades, the increasing demands of railways operations in the form of heavy loading and high speed have been noticed. Railway formation and ballast deform progressive under heavy axle cyclic loading, therefore the rail track needs proper design of ballast and formation bed to achieve the desire stiffness and stability for the safe and sound serviceability of the track. For the overall stability of the track on soft formation, the ground is improved by different techniques prior to the construction on that, in order to avoid the failure and differential settlement during the designed trains operation. The numerical analyses illustrate that the total deformation and bearing capacity of the railway tracks mostly depend on the changes in the friction angle and cohesion of the selected soils of the subgrade. To avoid failure in the formation of track under the design loads, the proper selection of types of soils, its layer thickness, well compaction during construction and provision of proper track drainage system are extremely important. For the construction of new railway tracks the soils having greater values of friction angle, cohesion and elastic stiffness with the well graded ballast cushion under the sleepers of designed side slopes can be used to reduce the maintenance cost, considerably increase the life time of the components of the tracks and ultimately give better performance of the tracks. KW - Eisenbahnstrecke KW - railway track KW - ballast KW - PLAXIS 2D KW - numerical modeling KW - track maintenance KW - subgrade KW - drainage Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180907-37867 ER - TY - CHAP A1 - Mueller, Matthias A1 - Ludwig, Horst-Michael ED - Ludwig, Horst-Michael T1 - Neue Modelle für den Frost-Tausalz-Angriff auf Beton T2 - Tagungsbericht, 20. Ibausil - 20. Internationale Baustofftagung, 12. - 14. September 2018, Weimar, Teil 1 N2 - Für den Frost-Tausalz-Angriff auf Beton existiert eine Reihe von Schadenstheorien. Drei aktuelle Theorien nehmen für sich in Anspruch, den Schadensmechanismus und insbesondere den Einfluss niedrig konzentrierter Tausalzlösungen auf den Schädigungsgrad gut abbilden zu können. Die Glue Spall-Theorie sowie die Cryogenic Suction-Theorie bieten plausible Ansätze. In Untersuchungen konnten einige Modellvorstellungen bestätigt werden, insbesondere der Prozess des kryogenen Saugens. Ob dieser Vorgang oder die mechanische Glue Spall-Belastung tatsächlich schadensauslösend sind, kann anhand der Untersuchungen jedoch noch nicht zweifelsfrei bestätigt oder ausgeschlossen werden. Die Brine Rejection-Theorie zeigt wichtige Prozesse auf, die für die Schädigung bei einem Frost-Tausalz-Angriff relevant sein können. Als alleinstehendes Modell ist es eher nicht geeignet. KW - Beton KW - Beton KW - Frost-Tausalz-Angriff Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-48691 SN - 978-3-00-059950-7 (Bauhaus-Universitätsverlag Weimar) ER -