TY - THES A1 - Hauschild, Thomas T1 - Computer Supported Cooperative Work-Applikationen in der Bauwerksplanung auf Basis einer integrierten Bauwerksmodellverwaltung T1 - Computer Supported Cooperative Work Applications for the Design of Buildings based on an integrated Building Model Management N2 - Gegenstand der vorliegenden Arbeit ist die Konzeption und prototypische Umsetzung von Techniken des Computer Supported Cooperative Work (CSCW) im Rahmen einer integrierten objektorientierten und dynamischen Bauwerksmodellverwaltung zur Unterstützung der Bauwerksplanung. Die Planung von Bauwerken ist durch einen hohen Grad an Arbeitsteiligkeit, aber auch durch eine schwache Strukturierung der ablaufenden Prozesse gekennzeichnet. Besonders durch den Unikatcharakter des Planungsgegenstands \'Bauwerk\' ergeben sich signifikante Unterschiede zum Entwurf anderer, durch Serienfertigung produzierter Industriegüter. Zunehmend wird die Planung von Bauwerken in Virtual Enterprises ausgeführt, die sich durch eine dynamische Organisationsstruktur, geographische Verteilung der Partner, schwer normierbare Informationsflüsse und eine häufig stark heterogene informationstechnische Infrastruktur auszeichnen. Zur rechnerinternen Repräsent! ation des Planungsgegenstands haben sich objektorientierte Bauwerksmodelle bewährt. Aufgrund der Veränderlichkeit der Bauwerke und deren rechnerinterner Repräsentation im Laufe des Bauwerkslebenszyklus ist eine dynamische Anpassung der Modelle unumgänglich. Derartige in Form von Taxonomien dargestellte dynamische Bauwerksmodellstrukturen können gemeinsam mit den in Instanzform vorliegenden konkreten Projektinformationen in entsprechenden Modellverwaltungssystemen (MVS) gehandhabt werden. Dabei wird aufgrund der Spezialisierung und Arbeitsteilung im Planungsprozess von einer inhaltlich verknüpften Partialmodellstruktur, die räumlich verteilt sein kann, ausgegangen. Die vorgeschlagenen Methoden zur Koordinierung der Teamarbeit in der Bauwerksplanung beruhen auf der Nutzung von CSCW–Techniken für \'Gemeinsame Informationsräume\' und \'Workgroup Computing\', die im Kontext der als Integrationsbasis fungierenden Modellverwaltungssysteme umgesetzt werden. Dazu werden die zur d! ynamischen Bauwerksmodellierung erforderlichen Metaebenenfunk! tionalitäten sowie Ansätze zur Implementierung von Modellverwaltungskernen systematisiert. Ebenso werden notwendige Basistechniken für die Realisierung von MVS untersucht und eine Architektur zur rollenspezifischen Präsentation dynamischer Modellinhalte vorgestellt. Da klassische Schichtenmodelle nicht auf die Verhältnisse in Virtual Enterprises angewendet werden können, wird eine physische Systemarchitektur mit einem zentralen Projektserver, Domänenservern und Domänenclients vorgestellt. Ebenso werden Techniken zur Sicherung des autorisierten Zugriffs sowie des Dokumentencharakters beschrieben. Zur Unterstützung der asynchronen Phasen der Kooperation wird der gemeinsame Informationsraum durch Mappingtechniken zur Propagation und Notifikation von Änderungsdaten bezüglich relevanter Modellinformationen ergänzt. Zur Unterstützung synchroner Phasen werden Techniken zur Schaffung eines gemeinsamen Kontexts durch relaxierte WYSIWIS–Präsentationen auf Basis der Modellinformationen! verbunden mit Telepresence–Techniken vorgestellt. Weiterhin werden Methoden zur Sicherung der Group–Awareness für alle Kooperationsphasen betrachtet. N2 - The thesis covers the conceptual design and the prototypical realisation of Computer Supported Cooperative Work (CSCW)– techniques within the scope of an integrated, object-oriented, dynamic model management system for the support of building planning activities. The planning of buildings is characterised by a high degree of collaboration but by a weak structuring of the processes, too. Significant differences between the design of buildings and industrial goods produced by series production are implied by the uniqueness of a building. Increasingly, the planning of buildings is accomplished by Virtual Enterprises. These are characterised by a dynamic organisation structure, geographic dispersion of the involved planning experts, information flows, which are hard to standardise, and a frequently very heterogeneous information-technology infrastructure. Object oriented building models have proven to be a suitable base for! the binary representation of planning subject information. Due to the changeability of both building structures and their binary representation during the building life cycle, a dynamical adaptation of the models is indispensable. Dynamic building models, which are represented by taxonomic information, can be handled together with actual project information, which is stored in taxonomy instances within an appropriate model management system. Due to the specialisation and the division of labour in the planning process, a semantic linked but spatial distributed partial model structure is applied. The recommended methods for the coordination of teamwork in the planning process are based on the application of CSCW-techniques for \'Shared Information Spaces\' and \'Workgroup Computing\' in the context of model management systems acting as an foundation for planning information integration. The required meta level functionalities for dynamic building modelling and appropriate! implementation approaches for modelling kernels are systemat! ised. The necessary base techniques for the realisation of model management systems are explored. An architecture for the role specific presentation of dynamic model content is introduced, too. Due to the inadequacy of conventional multi-tier models for an application in Virtual Enterprises, an appropriate physical system architecture with a central project server, domain servers and domain clients is introduced. The thesis covers techniques, which ensure the authorised access to information and the authenticity of planning documents, too. For an adequate support of the asynchronous phases of collaboration, the Shared Information Space is supplied with mapping mechanisms for the propagation and user notification of changes in the relevant planning information. Synchronous collaboration can be performed by means of relaxed WYSIWIS-presentations connected with telepresence mechanisms in order to create a shared context for the planners. Furthermore, methods for the provis! ion of group-awareness for all co-operation phases are treated. KW - Computer Supported Cooperative Work KW - Groupware KW - Bauwerk KW - Modellierung KW - Virtuelles Unternehmen KW - Verteiltes System KW - Domänenmodelle KW - Kooperatives Arbeiten KW - CSCW KW - Dynamische Modellverwaltungssysteme KW - Dynamische Schemaevolution KW - Building Modelling KW - Domain Models KW - Co-operative Work KW - Dynamic Model Management Systems KW - Dynamic Schema Evolution Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040311-672 ER - TY - THES A1 - Willenbacher, Heiko T1 - Interaktive verknüpfungsbasierte Bauwerksmodellierung als Integrationsplattform für den Bauwerkslebenszyklus T1 - Interactive link-based building modelling as an integration platform for the building life cycle N2 - Den Gegenstand der Dissertation bilden die Konzeption und die exemplarische Realisierung eines verknüpfungsbasierten Bauwerksmodellierungsansatzes zur Schaffung einer integrierenden Arbeits- und Planungsumgebung für den Lebenszyklus von Bauwerken. Die Basis der Integration bildet ein deklarativ ausgerichteter Bauwerksmodellverbund bestehend aus abstrahierten, domänenspezifischen Partialmodellen. Auf Grund der de facto existierenden Dynamik im Bauwerkslebenszyklus werden sowohl der Bauwerksmodellverbund als auch die einzelnen Partialmodelle dynamisch modifizierbar konzipiert und auf Basis spezieller Modellverwaltungssysteme technisch realisiert. Die Verständigung innerhalb der vorgeschlagenen Gesamtbauwerksmodellarchitektur basiert auf anwenderspezifisch zu erstellenden Verknüpfungen zwischen den Partialmodellen und wird im Sinne einer hybriden Modellarchitektur durch eine zentrale, die Verknüpfungen verwaltende Komponente koordiniert. Zur Verwaltung und Abarbeitung der Verknüpfungen wird der Einsatz von Softwareagenten im Rahmen eines Multiagentensystems vorgeschlagen und diskutiert. N2 - The subject of this thesis is the conception and the exemplary realisation of a link-based building modelling approach for the creation of an integrating work and planning environment for the life cycle of buildings. The basis of the integration forms a declarative aligned building model compound consisting of abstract, domain-specific partial models. Due to the in fact existing dynamics in the building life cycle, both the building model compound and the individual partial models are dynamically modifiable. The communication within the suggested total building model architecture is based on specific links provided by users between the partial models. This link-based communication is co-ordinated in the sense of a hybrid model architecture by a central, the links administering component. For the administration and processing of the links, a multiagent-system is suggested. KW - Bauwerk KW - Modellierung KW - Produktlebenszyklus KW - Planungsprozess KW - Mehragentensystem KW - Partialmodelle KW - Integration KW - Bauwerkslebenszyklus KW - Dynamik KW - Verknüpfungen KW - building modelling KW - partial models KW - building life cycle KW - dynamics KW - links Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040216-328 ER - TY - THES A1 - Huth, Olaf T1 - Ein adaptiertes Polyreferenz-Verfahren und seine Anwendung in der Systemidentifikation T1 - An adapted Polyreferenz procedure and its application in the system identification N2 - Die vorliegende Arbeit gliedert sich in das Gebiet der Systemidentifikation ein. Besonderes Augenmerk wird auf die Detektion, die Lokalisierung und die Quantifizierung von Systemveränderungen gerichtet. Für diese Ziele werden -basierend auf Schwingungsmessungen- modale Parameter sowie Ein- und Ausgangsgrößen im Frequenzbereich extrahiert. Die in dieser Arbeit entwickelte Adaption des Polyreferenz-Verfahrens beruht auf einer veränderten Bestimmung der Fundamentalmatrix mit Hilfe der verallgemeinerten Singulärwertzerlegung. Eine Vorfilterung, die eine Reduktion der Frequenzanteile im Signal bewirkt, ist dabei Voraussetzung. Diese basiert auf dem Einsatz rekursiver Filtertechiken und der einfachen Singulärwertzerlegung. Als Resultat können modale Parameter auch im Falle, wenn eng benachbarte und verrauschte Signalanteile vorliegen oder nur wenige Mess- und Anregungspunkte zur Verfügung stehen, präzise bestimmt und damit auch sehr geringe Syemveränderungen detektiert werden. Die mit dem adaptierten Polyreferenz-Verfahren extrahierten modalen Parameter werden in der Lokalisierung von Systemveränderungen eingesetzt. Zur Bestimmung modaler Parameter auch an realen Bauwerken wird die Konstruktion eines Impulshammers vorgestellt. Besonderes Gewicht wird dabei auf die Gestaltung des Erregerkraftspektrums gelegt. Die Arbeit enthält eine mögliche Vorgehensweise zum Abgleich von Finite-Elemente Modellen. In vielen praxisnahen Fällen sind weit weniger modale Parameter vorhanden, als freie, zum Abgleich bestimmte Parameter gesucht werden. Das Gleichungssystem ist schlechtgestellt und benötigt eine Regularisierung. Eine andere Möglichkeit zur Korrektur von Rechenmodellen bietet das Projektive Eingangsgrößenverfahren, das auf der Basis unvollständig gemessener Ein- und Ausgangsgrößen arbeitet. In einer Versagenswahrscheinlichkeitsstudie wird die Robustheit des Verfahrens gegenüber! Rauscheinflüssen untersucht N2 - This PhD thesis is related to the field of system identificaton focusing on detection of occurence, localisation and amount assessment of damage. This is done as well by extraction of modal parameters as input- and output residuals from vibration measurements. The presented work describes a developed adaption of the polyreference-procedure. It is based on a determination of the fundamental matrix by using the generalized singular value decomposition. A pre-filtering of the time series which kept the signals in a narrow frequenvy band higly supports this application. Two kinds of filter techniques can be combined: The classical way of recursive filter technique and the tool of the singular value decomposition. Therefore, modal parameters can be determined precisley in different cases if the data are strongly corrupted by noise, only few measuring- and excitation points are available, close-spa! ced frequency parts appear in the signal. This facts allow the detection of small structural changes in dynamic systems. The modal parameters extracted by the adapted polyreference-procedure are applied to localise the damage. For the extraction of modal parameters on real structures the construction of an impact hammer is presented with particular respect to the configuration of the excitation spectra. This work contains a possible way for a finite element model updating. In many relevant cases, if much more free parameters are searched than modal parameters are available, this problem is ill-posed and needs regularisation. The Projective Input Residual Method (PIRM) follows another way to correct computational models. It is operational on the extraction of input- and output residuals. Within a reliability study the robustness of the PIRM against noise influences is investigated. KW - Systemidentifikation KW - Bauwerk KW - Dynamische Belastung KW - Technische Überwachung KW - Langzeitverhalten KW - Modale Parameter KW - Schadensdiagnose KW - Schadensanalyse KW - Strukturdynamik KW - structural dynamics KW - system identification KW - modal parameters KW - fault diagnosis Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040202-34 ER -