@article{MorgenthalEickRauetal.,
  author    = {Morgenthal, Guido and Eick, Jan Frederick and Rau, Sebastian and Taraben, Jakob},
  title     = {Wireless Sensor Networks Composed of Standard Microcomputers and Smartphones for Applications in Structural Health Monitoring},
  series = {Sensors - Special Issue Selected Papers from 7th Asia-Pacific Workshop on Structural Health Monitoring},
  volume    = {2019},
  journal   = {Sensors - Special Issue Selected Papers from 7th Asia-Pacific Workshop on Structural Health Monitoring},
  number    = {Volume 19, Issue 9, 2070},
  publisher = {MDPI},
  doi       = {10.3390/s19092070},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190514-39123},
  pages     = {22},
  abstract  = {Wireless sensor networks have attracted great attention for applications in structural health monitoring due to their ease of use, flexibility of deployment, and cost-effectiveness. This paper presents a software framework for WiFi-based wireless sensor networks composed of low-cost mass market single-board computers. A number of specific system-level software components were developed to enable robust data acquisition, data processing, sensor network communication, and timing with a focus on structural health monitoring (SHM) applications. The framework was validated on Raspberry Pi computers, and its performance was studied in detail. The paper presents several characteristics of the measurement quality such as sampling accuracy and time synchronization and discusses the specific limitations of the system. The implementation includes a complementary smartphone application that is utilized for data acquisition, visualization, and analysis. A prototypical implementation further demonstrates the feasibility of integrating smartphones as data acquisition nodes into the network, utilizing their internal sensors. The measurement system was employed in several monitoring campaigns, three of which are documented in detail. The suitability of the system is evaluated based on comparisons of target quantities with reference measurements. The results indicate that the presented system can robustly achieve a measurement performance commensurate with that required in many typical SHM tasks such as modal identification. As such, it represents a cost-effective alternative to more traditional monitoring solutions.},
  subject      = {Structural Health Monitoring},
  language  = {en}
}
@article{KavrakovLegatiukGuerlebecketal.,
  author    = {Kavrakov, Igor and Legatiuk, Dmitrii and G{\"u}rlebeck, Klaus and Morgenthal, Guido},
  title     = {A categorical perspective towards aerodynamic models for aeroelastic analyses of bridge decks},
  series = {Royal Society Open Science},
  journal   = {Royal Society Open Science},
  number    = {Volume 6, Issue 3},
  doi       = {/10.1098/rsos.181848},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190314-38656},
  pages     = {20},
  abstract  = {Reliable modelling in structural engineering is crucial for the serviceability and safety of structures. A huge variety of aerodynamic models for aeroelastic analyses of bridges poses natural questions on their complexity and thus, quality. Moreover, a direct comparison of aerodynamic models is typically either not possible or senseless, as the models can be based on very different physical assumptions. Therefore, to address the question of principal comparability and complexity of models, a more abstract approach, accounting for the effect of basic physical assumptions, is necessary. This paper presents an application of a recently introduced category theory-based modelling approach to a diverse set of models from bridge aerodynamics. Initially, the categorical approach is extended to allow an adequate description of aerodynamic models. Complexity of the selected aerodynamic models is evaluated, based on which model comparability is established. Finally, the utility of the approach for model comparison and characterisation is demonstrated on an illustrative example from bridge aeroelasticity. The outcome of this study is intended to serve as an alternative framework for model comparison and impact future model assessment studies of mathematical models for engineering applications.},
  subject      = {Br{\"u}cke},
  language  = {en}
}
@phdthesis{Kavrakov,
  author    = {Kavrakov, Igor},
  title     = {Synergistic Framework for Analysis and Model Assessment in Bridge Aerodynamics and Aeroelasticity},
  publisher = {Bauhaus-Universit{\"a}tsverlag},
  address   = {Weimar},
  isbn      = {978-3-95773-284-2},
  doi       = {10.25643/bauhaus-universitaet.4109},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200316-41099},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {314},
  abstract  = {Wind-induced vibrations often represent a major design criterion for long-span bridges. This work deals with the assessment and development of models for aerodynamic and aeroelastic analyses of long-span bridges. Computational Fluid Dynamics (CFD) and semi-analytical aerodynamic models are employed to compute the bridge response due to both turbulent and laminar free-stream. For the assessment of these models, a comparative methodology is developed that consists of two steps, a qualitative and a quantitative one. The first, qualitative, step involves an extension of an existing approach based on Category Theory and its application to the field of bridge aerodynamics. Initially, the approach is extended to consider model comparability and completeness. Then, the complexity of the CFD and twelve semi-analytical models are evaluated based on their mathematical constructions, yielding a diagrammatic representation of model quality. In the second, quantitative, step of the comparative methodology, the discrepancy of a system response quantity for time-dependent aerodynamic models is quantified using comparison metrics for time-histories. Nine metrics are established on a uniform basis to quantify the discrepancies in local and global signal features that are of interest in bridge aerodynamics. These signal features involve quantities such as phase, time-varying frequency and magnitude content, probability density, non-stationarity, and nonlinearity. The two-dimensional (2D) Vortex Particle Method is used for the discretization of the Navier-Stokes equations including a Pseudo-three dimensional (Pseudo-3D) extension within an existing CFD solver. The Pseudo-3D Vortex Method considers the 3D structural behavior for aeroelastic analyses by positioning 2D fluid strips along a line-like structure. A novel turbulent Pseudo-3D Vortex Method is developed by combining the laminar Pseudo-3D VPM and a previously developed 2D method for the generation of free-stream turbulence. Using analytical derivations, it is shown that the fluid velocity correlation is maintained between the CFD strips. Furthermore, a new method is presented for the determination of the complex aerodynamic admittance under deterministic sinusoidal gusts using the Vortex Particle Method. The sinusoidal gusts are simulated by modeling the wakes of flapping airfoils in the CFD domain with inflow vortex particles. Positioning a section downstream yields sinusoidal forces that are used for determining all six components of the complex aerodynamic admittance. A closed-form analytical relation is derived, based on an existing analytical model. With this relation, the inflow particles' strength can be related with the target gust amplitudes a priori. The developed methodologies are combined in a synergistic framework, which is applied to both fundamental examples and practical case studies. Where possible, the results are verified and validated. The outcome of this work is intended to shed some light on the complex wind-bridge interaction and suggest appropriate modeling strategies for an enhanced design.},
  subject      = {Br{\"u}cke},
  language  = {en}
}