@article{MorgenthalEickRauetal., author = {Morgenthal, Guido and Eick, Jan Frederick and Rau, Sebastian and Taraben, Jakob}, title = {Wireless Sensor Networks Composed of Standard Microcomputers and Smartphones for Applications in Structural Health Monitoring}, series = {Sensors - Special Issue Selected Papers from 7th Asia-Pacific Workshop on Structural Health Monitoring}, volume = {2019}, journal = {Sensors - Special Issue Selected Papers from 7th Asia-Pacific Workshop on Structural Health Monitoring}, number = {Volume 19, Issue 9, 2070}, publisher = {MDPI}, doi = {10.3390/s19092070}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190514-39123}, pages = {22}, abstract = {Wireless sensor networks have attracted great attention for applications in structural health monitoring due to their ease of use, flexibility of deployment, and cost-effectiveness. This paper presents a software framework for WiFi-based wireless sensor networks composed of low-cost mass market single-board computers. A number of specific system-level software components were developed to enable robust data acquisition, data processing, sensor network communication, and timing with a focus on structural health monitoring (SHM) applications. The framework was validated on Raspberry Pi computers, and its performance was studied in detail. The paper presents several characteristics of the measurement quality such as sampling accuracy and time synchronization and discusses the specific limitations of the system. The implementation includes a complementary smartphone application that is utilized for data acquisition, visualization, and analysis. A prototypical implementation further demonstrates the feasibility of integrating smartphones as data acquisition nodes into the network, utilizing their internal sensors. The measurement system was employed in several monitoring campaigns, three of which are documented in detail. The suitability of the system is evaluated based on comparisons of target quantities with reference measurements. The results indicate that the presented system can robustly achieve a measurement performance commensurate with that required in many typical SHM tasks such as modal identification. As such, it represents a cost-effective alternative to more traditional monitoring solutions.}, subject = {Structural Health Monitoring}, language = {en} } @misc{vonButler, type = {Master Thesis}, author = {von Butler, Natalie}, title = {Scalarization Methods for Multi-Objective Structural Optimization}, doi = {10.25643/bauhaus-universitaet.4010}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20191030-40106}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {178}, abstract = {Scalarization methods are a category of multiobjective optimization (MOO) methods. These methods allow the usage of conventional single objective optimization algorithms, as scalarization methods reformulate the MOO problem into a single objective optimization problem. The scalarization methods analysed within this thesis are the Weighted Sum (WS), the Epsilon-Constraint (EC), and the MinMax (MM) method. After explaining the approach of each method, the WS, EC and MM are applied, a-posteriori, to three different examples: to the Kursawe function; to the ten bar truss, a common benchmark problem in structural optimization; and to the metamodel of an aero engine exit module. The aim is to evaluate and compare the performance of each scalarization method that is examined within this thesis. The evaluation is conducted using performance metrics, such as the hypervolume and the generational distance, as well as using visual comparison. The application to the three examples gives insight into the advantages and disadvantages of each method, and provides further understanding of an adequate application of the methods concerning high dimensional optimization problems.}, subject = {Mehrkriterielle Optimierung}, language = {en} } @phdthesis{Chen, author = {Chen, Na}, title = {A Balance between Ideals and Reality — Establishing and Evaluating a Resilient City Indicator System for Central Chinese Cities}, doi = {10.25643/bauhaus-universitaet.4030}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20191121-40309}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {212}, abstract = {Recent years have seen a gradual shift in focus of international policies from a national and regional perspective to that of cities, a shift which is closely related to the rapid urbanization of developing countries. As revealed in the 2011 Revision of the World Urbanization Prospects published by the United Nations, 51\% of the global population (approximately 3.6 billion people) lives in cities. The report predicts that by 2050, the world's urban population will increase by 2.3 billion, making up 68\% of the population. The growth of urbanization in the next few decades is expected to primarily come from developing countries, one third of which will be in China and India. With rapid urbanization and the ongoing growth of mega cities, cities must become increasingly resilient and intelligent to cope with numerous challenges and crises like droughts and floods arising from extreme climate, destruction brought by severe natural disasters, and aggregated social contradictions resulting from economic crises. All cities face the urban development dynamics and uncertainties arising from these problems. Under such circumstances, cities are considered the critical path from crisis to prosperity, so scholars and organizations have proposed the construction of "resilient cities." On the one hand, this theory emphasizes cities' defenses and buffering capacity against disasters, crises and uncertainties, as well as recovery after destruction; on the other hand, it highlights the learning capacity of urban systems, identification of opportunities amid challenges, and maintenance of development vitality. Some scholars even believe that urban resilience is a powerful supplement to sustainable development. Hence, resilience assessment has become the latest and most important perspective for evaluating the development and crisis defense capacity of cities. Rather than a general abstract concept, urban resilience is a comprehensive measurement of a city's level of development. The dynamic development of problems is reflected through quantitative indicators and appraisal systems not only from the perspective of academic research, but also governmental policy, so as to scientifically guide development, and measure and compare cities' development levels. Although international scholars have proposed quantitative methods for urban resilience assessment, they are however insufficiently systematic and regionally adaptive for China's current urban development needs. On the basis of comparative study on European and North American resilient city theories, therefore, this paper puts forwards a theoretical framework for resilient city systems consistent with China's national conditions in light of economic development pressure, natural resource depletion, pollution, and other salient development crises in China. The key factors influencing urban resilience are taken into full consideration; expert appraisal is conducted based on the Delphi Method and the analytic hierarchy process (AHP) to design an extensible and updatable resilient city evaluation system which is sufficiently systematic, geographically adaptable, and sustainable for China's current urban development needs. Finally, Changsha is taken as the main case for empirical study on comprehensive evaluation of similar cities in Central China to improve the indicator system.}, subject = {Stadtplanung}, language = {en} } @phdthesis{Tasch, author = {Tasch, Alexander}, title = {Reaktive Cu-Fe-Al-Mn-Oxidkeramiken f{\"u}r die Sauerstoffseparation aus der Luft}, doi = {10.25643/bauhaus-universitaet.4041}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20191209-40414}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Die Gase Sauerstoff und Stickstoff werden f{\"u}r eine Vielzahl an technischen, industriellen, biologischen und medizinischen Einsatzzwecken ben{\"o}tigt. So liegen Anwendungsgebiete dieser Gase neben der klassischen metallverarbeitenden und der chemischen Industrie bei Sauerstoff vor allem in der Medizin, Verbrennungs- und Kl{\"a}ranlagenoptimierung sowie der Fischzucht und bei Stickstoff als Schutz- beziehungsweise Inertgas in der Kunststoffindustrie, der Luft- und Raumfahrt sowie dem Brandschutz. Die Bereitstellung der Gase Sauerstoff und Stickstoff wird nahezu ausschließlich durch die Abtrennung aus der Umgebungsluft realisiert, welche aus ca. 78 Vol.-\% Stickstoff, 21 Vol.-\% Sauerstoff und 1 Vol.-\% Spurengasen (Ar, CO2, Ne, He, ...) besteht. Am Markt etablierte Verfahren der Luftzerlegung sind das Linde-, das PSA- (pressure swing adsorption/Druckwechseladsorption) oder verschiedene Membran-Verfahren. Hierdurch werden die ben{\"o}tigten Gase entweder direkt vor Ort beim Verbraucher erzeugt (PSA- und Polymer-Membranverfahren: geringe Reinheiten) oder zentral in großen Anlagen hergestellt (Linde-Verfahren: hohe Reinheiten) und anschließend zum Verbraucher in Form von Flaschen- oder Tankgasen geliefert (Tansportkosten). F{\"u}r kleinere Verbraucher mit hohen Anspr{\"u}chen an die Reinheit des ben{\"o}tigten Sauerstoffs beziehungsweise Stickstoffs ergibt sich nur die M{\"o}glichkeit, die Gase als kostenintensive Transportgase zentraler Gaseversorger zu beziehen und sich somit in eine Abh{\"a}ngigkeit (Liefervertr{\"a}ge, Flaschen-/Tankmieten, ...) zu diesen zu begeben sowie eine eigene Lagerhaltung f{\"u}r die ben{\"o}tigten Gase (Mehraufwand, Lagerkosten, Platzbedarf) zu betreiben. Ziel dieser Arbeit ist es, keramische Material-Systeme auf Basis chemischer Hochtemperatur-Reaktionen als Reaktive Oxidkeramiken zu entwickeln und diese hinsichtlich eines m{\"o}glichen Einsatzes f{\"u}r die Sauerstoffseparation in neuartigen Luftzerlegungsanlagen zu untersuchen. Derartige Anlagen sollen in ihrem Prinzip an die regenerative Sauerstoffseparation angelehnt sein und in ihren Reaktoren die Reaktiven Oxidkeramiken als Festbett-Material abwechselnd mit Luft be- und Vakuum oder O2-armen Atmosph{\"a}ren entladen. Die Verwendung Reaktiver Oxidkeramiken, welche im Vergleich zu den bisherigen Materialien h{\"o}here Sauerstoffaustauschmengen und -raten bei gleichzeitig hoher Lebensdauer und Korrosionsbest{\"a}ndigkeit sowie relativ einfacher Handhabe aufweisen w{\"u}rden, soll ein Schritt in Richtung einer effizienten alternativen Luftzerlegungstechnologie sein. Mit den Reaktiven Oxidkeramiken in einer Luftzerlegungsanlage sollte es im besten Fall m{\"o}glich sein, in kleinen Anlagen sehr reinen Sauerstoff und zugleich sauerstofffreies Inertgas zu erzeugen sowie eine Sauerstoffan- oder -abreicherung von Luft, Prozess- oder Abgasen zu generieren. Somit bes{\"a}ße eine solche, auf Reaktiven Oxidkeramiken basierende Technologie sehr weit gef{\"a}cherte Einsatzgebiete und demzufolge ein enormes wirtschaftliches Potential.}, subject = {Luftzerlegung}, language = {de} } @article{KavrakovLegatiukGuerlebecketal., author = {Kavrakov, Igor and Legatiuk, Dmitrii and G{\"u}rlebeck, Klaus and Morgenthal, Guido}, title = {A categorical perspective towards aerodynamic models for aeroelastic analyses of bridge decks}, series = {Royal Society Open Science}, journal = {Royal Society Open Science}, number = {Volume 6, Issue 3}, doi = {/10.1098/rsos.181848}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190314-38656}, pages = {20}, abstract = {Reliable modelling in structural engineering is crucial for the serviceability and safety of structures. A huge variety of aerodynamic models for aeroelastic analyses of bridges poses natural questions on their complexity and thus, quality. Moreover, a direct comparison of aerodynamic models is typically either not possible or senseless, as the models can be based on very different physical assumptions. Therefore, to address the question of principal comparability and complexity of models, a more abstract approach, accounting for the effect of basic physical assumptions, is necessary. This paper presents an application of a recently introduced category theory-based modelling approach to a diverse set of models from bridge aerodynamics. Initially, the categorical approach is extended to allow an adequate description of aerodynamic models. Complexity of the selected aerodynamic models is evaluated, based on which model comparability is established. Finally, the utility of the approach for model comparison and characterisation is demonstrated on an illustrative example from bridge aeroelasticity. The outcome of this study is intended to serve as an alternative framework for model comparison and impact future model assessment studies of mathematical models for engineering applications.}, subject = {Br{\"u}cke}, language = {en} } @unpublished{RadmardRahmaniKoenke, author = {Radmard Rahmani, Hamid and K{\"o}nke, Carsten}, title = {Passive Control of Tall Buildings Using Distributed Multiple Tuned Mass Dampers}, doi = {10.25643/bauhaus-universitaet.3859}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190311-38597}, pages = {43}, abstract = {The vibration control of the tall building during earthquake excitations is a challenging task due to their complex seismic behavior. This paper investigates the optimum placement and properties of the Tuned Mass Dampers (TMDs) in tall buildings, which are employed to control the vibrations during earthquakes. An algorithm was developed to spend a limited mass either in a single TMD or in multiple TMDs and distribute them optimally over the height of the building. The Non-dominated Sorting Genetic Algorithm (NSGA - II) method was improved by adding multi-variant genetic operators and utilized to simultaneously study the optimum design parameters of the TMDs and the optimum placement. The results showed that under earthquake excitations with noticeable amplitude in higher modes, distributing TMDs over the height of the building is more effective in mitigating the vibrations compared to the use of a single TMD system. From the optimization, it was observed that the locations of the TMDs were related to the stories corresponding to the maximum modal displacements in the lower modes and the stories corresponding to the maximum modal displacements in the modes which were highly activated by the earthquake excitations. It was also noted that the frequency content of the earthquake has significant influence on the optimum location of the TMDs.}, subject = {Schwingungsd{\"a}mpfer}, language = {en} }