@inproceedings{MittrupSmarslyHartmann2003,
  author    = {Mittrup, Ingo and Smarsly, Kay and Hartmann, Dietrich},
  title     = {Implementierung eines webbasierten Talsperren-Monitoring-Systems},
  doi       = {10.25643/bauhaus-universitaet.334},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3347},
  year      = {2003},
  abstract  = {Die Bauwerks{\"u}berwachung gewinnt aus sicherheitstechnischen sowie aus wirtschaftlichen Gr{\"u}nden zunehmend an Bedeutung. Nicht nur die Bauwerkssicherheit kann durch leistungsf{\"a}hige Monitoring-Systeme angemessen beurteilt, auch die Nutzungsdauer bestehender Bauwerke kann durch die gewonnenen Informationen deutlich verl{\"a}ngert werden. Das vorliegende Papier beschreibt die Entwicklung eines webbasierten Talsperren-Monitoring-Systems, das die automatisierte Erfassung von Daten vor Ort sowie die computergest{\"u}tzte Aufbereitung und Analyse der gesammelten Messdaten erm{\"o}glicht. Das Monitoring-System ist durch seinen modularen Aufbau nicht auf die Talsperren-{\"U}berwachung beschr{\"a}nkt, sondern kann ohne großen Aufwand an andere {\"U}berwachungsaufgaben angepasst werden. Das System besteht aus drei wesentlichen Modulen: (i) einer erweiterbaren Klassenbibliothek, die die Steuerung der im Bauwerk installierten Messelektronik erm{\"o}glicht, (ii) einem webbasierten Datenerfassungsmodul, das neben der automatischen Datenerfassung eine Fernsteuerung der Messelektronik erlaubt und Funktionen zur Verwaltung der {\"U}berwachungsaufgaben bereitstellt, sowie (iii) einem webbasierten Visualisierungs- und Auswertungsmodul zur Aufbereitung und Analyse der gesammelten Daten. Alle an der {\"U}berwachung beteiligten Mitarbeiter k{\"o}nnen mit einem {\"u}blichen Web-Browser {\"u}ber das Internet auf das entwickelte System zugreifen; ein Zugriff mittels Mobiltelefon ist alternativ m{\"o}glich. Das implementierte Talsperren-Monitoring-System begleitet die beteiligten Fachleute von der Erfassung der Daten vor Ort bis hin zur Aufbereitung und Analyse der Messdaten an zentraler Stelle: Die Mitarbeiter werden durch einen einfachen Zugriff auf die installierte Messelektronik, automatisierte Messungen und umfangreiche Analysefunktionalit{\"a}ten bei ihren spezifischen Aufgaben unterst{\"u}tzt. Der bisherige manuelle Arbeitsaufwand f{\"u}r Datenerfassung, -transfer und Analyse wird somit deutlich reduziert.},
  subject      = {Talsperre},
  language  = {de}
}
@inproceedings{Schutte2000,
  author    = {Schutte, Gerrit},
  title     = {Zur Ermittlung von Spannungen am Rand eines elastischen Kontinuums},
  doi       = {10.25643/bauhaus-universitaet.613},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6135},
  year      = {2000},
  abstract  = {F{\"u}r den Entwurf von Ingenieurbauten ist eine zuverl{\"a}ssige Prognose {\"u}ber den Spannungsverlauf im Bauwerk und auf dessen Rand von großer Bedeutung. Eine geschlossene L{\"o}sung der elastischen Bestimmungsgleichungen des Bauwerks ist in der Regel nicht verf{\"u}gbar. Es wird daher unter Verwendung der Methode der gewichteten Reste eine schwache Form der Gleichungen abgeleitet, die zu einem gemischten Arbeitsprinzip f{\"u}hrt. Das zugeh{\"o}rige Finite-Elemente-Modell erlaubt es Spannungen am Rand des Bauwerks zu ermitteln, die im Gleichgewicht zu den angreifenden Lasten stehen.},
  subject      = {Kontinuum},
  language  = {de}
}
@inproceedings{Masih2000,
  author    = {Masih, Rusk},
  title     = {EFFECT OF DEMOLITION ON REMAINING PART OF CONCRETE BRIDGE NUMERICAL ANALYSIS VS. EXPERIMENTAL RESULTS},
  doi       = {10.25643/bauhaus-universitaet.603},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-6032},
  year      = {2000},
  abstract  = {The US Department of Highways is embarked on a very ambitious program to renovate much of the bridges and highways allover the USA. While it is doing so, it is also trying to take advantage of using such program to enhance the research for future programs. One of those projects is a 1000 ft. (305 m) long concrete bridge in the State of Vermont, located in the North East of USA. It is scheduled for renovation, in which the deck and its side parapet walls will be replaced. New England Transportation Consortium (NETC) decided to make further use of this project to find what effect will the heavy demolition tools have on the concrete to remain in place. The goal is to find out the extent of the experimental measurement agreement with the analytical results. In order to accomplish such a goal, numerous strain gages were installed at and in the vicinity of the demolition areas. Those gages will measure the effect of the demolition on the adjacent areas, and how far the destructive effect of the powerful demolition tools can propagate through different parts of the structure. The gages are connected to National Instruments data acquisition equipment, which is connected to a lap top computer to save all the acquired data. The analytical part the project will be using the energy method, which means that the energy applied by the demolition tools should equal the energy absorbed by the demolished structure, in elastic and plastic deformation forms.},
  subject      = {Betonbr{\"u}cke},
  language  = {en}
}
@inproceedings{KravchenkoKravchenko2003,
  author    = {Kravchenko, Viktor and Kravchenko, Vladislav},
  title     = {On the Factorization of the Schr{\"o}dinger Operator and Its Applications for Studying Some First Order Systems of Mathematical Physics},
  doi       = {10.25643/bauhaus-universitaet.325},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-3251},
  year      = {2003},
  abstract  = {With the aid of factorization of the Schr{\"o}dinger operator by quaternionic differential operators of first order proposed in recent works by S. Bernstein and K. G{\"u}rlebeck we study the system describing forcefree magnetic fields with nonconstant proportionality factor, the static Maxwell system for inhomogeneous media, the Beltrami condition and the Dirac equation with different types of potentials depending on one variable. We obtain integral representations for solutions of these systems.},
  subject      = {Mathematische Physik},
  language  = {en}
}
@inproceedings{Oestman1997,
  author    = {{\"O}stman, L.},
  title     = {Knowledge Elicitation through a Pragmatic Inquiry},
  doi       = {10.25643/bauhaus-universitaet.454},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4547},
  year      = {1997},
  abstract  = {This is a paper about knowledge in design and how to elicit knowledge from design processes. The paper is a preparation for an empirical study of interaction in the design process. Reasonings of three authors - Sch{\"o}n, Broadbent and Lundequist - on design processes is presented. They all have a pragmatic perspective in common, and regard the process as an activity without a definite form. Design is seen as an activity of creating models of forms and shapes, by addressing expert knowledge ­ in a dialogic way ­ to problematic situations. Due to the pragmatic approach I find the pragmatist Dewey´s understanding of knowledge and elecitation of knowledge appropiate for studying design processes. According to him it is possible to build up objectified descriptions of experiences, also of such, which are based on experiences of emotional and intuitive nature. There need not be a definite border, which separates tacit knowledge from explicit knowledge - when it comes to the question of the possibility of verbal descriptions. Tacit knowledge is possible to articulate within pragmatic thinking. The conclusion is, that it is possible to study the tacit knowledge of design processes, and get some qualitative insights useful for theory building. A study of design processes can look at three different forms of knowledge. It appears as a pre­cognitive understanding of the design situation, as integrated in the design activity - seeing the situation as something known - and in the process of creating something new.},
  subject      = {Entwurf},
  language  = {en}
}
@article{Dudek1997,
  author    = {Dudek, Mariusz},
  title     = {Zur Bewertung der Struktur von Verkehrsnetzen},
  doi       = {10.25643/bauhaus-universitaet.463},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4634},
  year      = {1997},
  abstract  = {In diese Ver{\"o}ffentlichung werden die Kennziffern dargestellt, die zur Beurteilung der Struktur von Verkehrsnetzen behilflich sein k{\"o}nnen. Zu diesem Zweck wurde die Graphentheorie angewendet. Eine erste Gruppe von Bewertungen st{\"u}tzt sich auf die Anzahl der Knoten und B{\"o}gen des Netzes. Detailliertere Informationen {\"u}ber Engp{\"a}sse oder Schwachstellen im Verkehrsnetz erh{\"a}lt man durch die Analyse der Kantenzusammenhangs. Die Unabh{\"a}ngigkeit der einzelnen Verkehrsarten , ihre Bewertung und Maßnahmen, sie zu verbessern werden vorgeschlagen und diskutiert. Weiteren Untersuchungen werden angeregt.},
  subject      = {Verkehrsnetz},
  language  = {de}
}
@inproceedings{BonevHristov2000,
  author    = {Bonev, Z. and Hristov, H.},
  title     = {BEHAVIOR FACTOR EVALUATION BASED ON SDOF SYSTEM PRESENTATION AND ENERGY APPROACH},
  doi       = {10.25643/bauhaus-universitaet.570},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5702},
  year      = {2000},
  abstract  = {Rectangular steel frames are considered and subjected to strong ground motion. Their behavior factor is numerically evaluated using nonlinear time history analysis and different ground acceleration records. The behavior factor is determined assuming severe collapse mechanism occurs throughout the time history. The system of equations is transformed into single equation end then the energy balance concept is applied. The expression for the behavior factor is derived and its application to four story two bays steel frame is illustrated and the corresponding results are discussed.},
  subject      = {Rahmentragwerk},
  language  = {en}
}
@article{KatranuschkovGehreScherer2004,
  author    = {Katranuschkov, Peter and Gehre, Alexander and Scherer, Raimar J.},
  title     = {User Requirements Capture in Distributed Project Environments: A Process-centred Approach},
  doi       = {10.25643/bauhaus-universitaet.202},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2029},
  year      = {2004},
  abstract  = {Efforts to define standards for representing AEC/FM data have been fairly successful. However defining a standard reference process model has not met with the same success. Yet almost every conceptual modelling or software development project starts by defining the business processes to be supported and the related requirements to be satisfied. This paper describes a new process-centred methodology for user requirements capture developed in the ICCI project (IST-2001-33022). Its essence is in recognising user requirements and use cases in the context of the real construction process, identifying the actors and roles for each individual activity and associating these activities with information, communication and standardisation requirements on the basis of a formalised specification, named the Process Matrix. In the paper we outline the history of process matrix development, introduce the basic structure of the matrix and show how it can be further extended and refined. We present also a web-based software implementation of the developed approach, describe how it has been used in ICCI and outline further perspectives.},
  subject      = {Informationstechnik},
  language  = {en}
}
@inproceedings{RaueWeitzmann2004,
  author    = {Raue, Erich and Weitzmann, R{\"u}diger},
  title     = {Analysis and Design of Hybrid Structures using Optimization Strategies},
  doi       = {10.25643/bauhaus-universitaet.102},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1023},
  year      = {2004},
  abstract  = {The paper gives a general overview and concerns with a specified set of computer-aided analysis modules for hybrid structures loaded by extreme excitations. All problems are solved by methods of linear, quadratic or nonlinear mathematical optimization, that leads to very effective and economic design solutions. All approaches are derived from general optimization problem that can be easily altered to conform to specific design tasks. Some advantages and possibilities of hybrid structural modeling (single or mixed model-supported) are discussed. The methods will be illustrated by an example structure and optimization schemes.},
  subject      = {Konzipieren <Technik>},
  language  = {en}
}
@inproceedings{QuerengaesserWernerFirmenich2000,
  author    = {Quereng{\"a}sser, Stephan and Werner, Frank and Firmenich, Berthold},
  title     = {Durchg{\"a}ngiges Informationsmanagement f{\"u}r den Bauprozeß von Einfamilienh{\"a}usern},
  doi       = {10.25643/bauhaus-universitaet.589},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5892},
  year      = {2000},
  abstract  = {Informations-und Kommunikationtechniken haben im Bauwesen noch nicht die gew{\"u}nschten Vorteile f{\"u}r Kosten und Qualit{\"a}t von Bauobjekten erzielt. Die Vielfalt der daf{\"u}r genutzten Systeme und Formate f{\"u}hrt h{\"a}ufig zu Redundanzen und Informationsverlusten in den Planungs- und Bauprozessen sowie Problemen beim Datenaustausch zwischen den Systemen. Durch die Datenmengen, die in CAD, AVA, Terminplanung, Tabellenkalkulation, Textverarbeitung etc. durch unterschiedliche Beteiligte erzeugt werden, ist dar{\"u}ber hinaus das Risiko einer unterschiedlichen Datenaktualit{\"a}t enorm. Als Konsequenz dieser Erkenntnisse bestand die Aufgabe, eine ganzheitliche und durchg{\"a}ngige Produkt- und Prozeßstrategie f{\"u}r den preiswerten Einfamilienhausbau zu entwickeln. Die Grundlage daf{\"u}r bildet ein komplexes System von rationellen Entwurfsregeln, Konstruktionsl{\"o}sungen und Bau- und Baustofflogistikkonzepten auf der Basis moderner Informations- und Kommunikationstechnologien.},
  subject      = {Einfamilienhaus},
  language  = {de}
}
@article{MaQin2004,
  author    = {Ma, Zhiliang and Qin, Liang},
  title     = {A Framework of Management Information System for Construction Projects},
  doi       = {10.25643/bauhaus-universitaet.212},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2126},
  year      = {2004},
  abstract  = {A comprehensive framework of information management system for construction projects in China has been established through extensive literature survey and field investigation. It utilizes the potential information technologies and covers the practical management patterns as well as the major aspects of construction project management. It can be used to guide and evaluate the design of the information management systems for construction projects in order to make the system to be applicable to a wide variety of construction projects and survive the changes in project management.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{EirinhevskyDikhnyakEirichevskyetal.1997,
  author    = {{\^E}irinhevsky, V. V. and D{\^i}khnyak, B. M. and {\^E}irichevsky, R. V. and {\^E}{\^i}zub, Y. G.},
  title     = {Determination of the Temperature of Dissipative Warming and Parameters of Fracture in Elastomers with using of Singular Finite Elements},
  doi       = {10.25643/bauhaus-universitaet.547},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5471},
  year      = {1997},
  abstract  = {For modeling of singular fields of stresses and deformations in elasters with a crack is offered to use of three-dimesional a special finite element. Weak compessible of elasters is taken into account on the basis of threefold approximation of fields of displacements, deformations and function of volume change. At intensive cyclic loading of the elastomer constructions with a crack it is necessary to take into account warming and large deformations at the crack top. The stress-deformed state elasters with a crack is determined from the decision of a nonlinear problem by a modified method Newton-Kantorovich. Account stress intensity factors for a rectangular plate with a various arrangement of a through crack is executed. Process of development of a surface crack and dissipative warming in prismatic a element of shift is investigated.},
  subject      = {Elastomer},
  language  = {en}
}
@inproceedings{MaWongYang2004,
  author    = {Ma, Zhiliang and Wong, K. D. and Yang, Jun},
  title     = {An Approach to Utilizing Exchanged Documents in Construction Projects Based on Data Warehouse Technology},
  doi       = {10.25643/bauhaus-universitaet.122},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1227},
  year      = {2004},
  abstract  = {There are many construction projects in China and mass documents are exchanged among the multi-party, including the owner, the contractor and the engineer in the projects. Based on previous studies, an approach to the utilization of the exchanged documents is established by using data warehouse technology and a prototype system called EXPLYZER is developed. The approach and the prototype system are verified through their application in a construction project. It is concluded that the approach can support the decision-making in project management.},
  subject      = {Bauwerk},
  language  = {en}
}
@article{KangMiranda2004,
  author    = {Kang, Shihchung and Miranda, Eduardo},
  title     = {Automated Simulation of the Erection Activities in Virtual Construction},
  doi       = {10.25643/bauhaus-universitaet.231},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2310},
  year      = {2004},
  abstract  = {The goal of the research is the development of a computer system to plan, simulate and visualize erection processes in construction. In the research construction cranes are treated as robots with predefined degrees of freedom and crane-specific motion planning techniques are developed to generate time-optimized and collision-free paths for each piece to be erected in the project. Using inverse kinematics and structural dynamics simulation, the computer system then computes the crane motions and velocities necessary to achieve the previously calculated paths. The main benefits of the research are the accurate planning and scheduling of crane operations leading to optimization of crane usage and project schedules, as well as improving overall crane safety in the project. This research is aimed at the development of systems that will allow computer-assisted erection of civil infrastructure and ultimately to achieve fully-automated erection processes using robotic cranes...},
  subject      = {Produktmodell},
  language  = {en}
}
@article{NeubergFankEkkerlein2004,
  author    = {Neuberg, Frank and Fank, Ernst and Ekkerlein, Christian},
  title     = {Integrated Life Cycle Simulation and Assessment of Buildings},
  doi       = {10.25643/bauhaus-universitaet.235},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2351},
  year      = {2004},
  abstract  = {Buildings require both for construction and, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. So far available knowledge about resource consumption during an entire life cycle of a building is still quite rare, because various criteria affect each other and/or overlay mutually. In this contribution a model based software concept is presented using an integrated approach for life cycle simulation and assessment of buildings. The essential point of the development consists of connecting an IFC compliant product model of a building via the Internet with data bases for the resource and energy requirement of building materials. Furthermore, numerical simulations allow calculating and minimizing the energy consumption, the resource requirement, the waste streams and also the noxious emissions. In the context of this paper we present the first release of software programs for architects and engineers, which help them to evaluate their design decisions objectively in early planning steps. Additionally the usage of the software is demonstrated by a test case study for a real world building. By applying this software in practice a substantial contribution for saving energy and natural resources can be provided in the sense of sustainable and ecological building design.},
  subject      = {Produktmodell},
  language  = {en}
}
@inproceedings{GebbekenBaumhauerIonita2004,
  author    = {Gebbeken, Norbert and Baumhauer, Andreas and Ionita, Mihai},
  title     = {Increasing the Reliability and Performance through Automatization and Parallel Working},
  doi       = {10.25643/bauhaus-universitaet.139},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1397},
  year      = {2004},
  abstract  = {Re-examination of the behaviour of structures can be necessary due to deterioration or changes in the traffic situation during their lifetime. The Finite Element Method (FEM) is widely used in order to accomplish numerical analysis. Considering the development of computer performance, more detailed FEM models can be analyzed, even on site, with mobile computers. To compensate the increasing amount of data needed for the model input, measures need to be taken to save time, by distributing the work. In order to provide consistency to the model, fedback data must be checked upon reception. A local wireless computer network of ultra-portable devices linked together with a computer can provide the coordination necessary for efficient parallel working. Based on a digital model consisting of all data gathered, structural modelling and numerical analysis are performed automatically. Thus, the user is released from the work that can be automatized and the time needed for the overall analysis of a structure is decreased.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@article{SemenovAlekseevaTarlapan2004,
  author    = {Semenov, Vitaly and Alekseeva, Elena and Tarlapan, Oleg},
  title     = {Virtual Construction using Map-based Approach},
  doi       = {10.25643/bauhaus-universitaet.244},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2447},
  year      = {2004},
  abstract  = {The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility...},
  subject      = {Produktmodell},
  language  = {en}
}
@article{KiviniemiFischer2004,
  author    = {Kiviniemi, Arto and Fischer, Martin},
  title     = {Requirements Management Interface to Building Product Models},
  doi       = {10.25643/bauhaus-universitaet.242},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2427},
  year      = {2004},
  abstract  = {In current AEC practice client requirements are typically recorded in a building program, which, depending on the building type, covers various aspects from the overall goals, activities and spatial needs to very detailed material and condition requirements. This documentation is used as the starting point of the design process, but as the design progresses, it is usually left aside and changes are made incrementally based on the previous design solution. These incremental small changes can lead to a solution that may no longer meet the original requirements. In addition, design is by nature an iterative process and the proposed solutions often also cause evolution in the client requirements. However, the requirements documentation is usually not updated accordingly. Finding the latest updates and evolution of the requirements from the documentation is very difficult, if not impossible. This process can lead to an end result, which is significantly different from the documented requirements. Some important requirements may not be satisfied, and even if the design process was based on agreed-upon changes in the scope and requirements, differences in the requirements documents and in the completed building can lead to well-justified doubts about the quality of the design and construction process...},
  subject      = {Produktmodell},
  language  = {en}
}
@article{KangMiranda2004,
  author    = {Kang, Shihchung and Miranda, Eduardo},
  title     = {Physics Based Model for Simulating the Dynamics of Tower Cranes},
  doi       = {10.25643/bauhaus-universitaet.240},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2409},
  year      = {2004},
  abstract  = {The goal of the research is to increase the understanding of dynamic behaviors during the crane operation, and develops computer-aided methods to improve the training of crane operators. There are approximately 125,000 cranes in operation today in the construction industry, responsible for major portion of erection activities. Unfortunately, many accidents occur every year in the U.S. and other countries related to the operation of cranes in construction sites. For example on November 28, 1989 a tower crane collapse during the construction of a building in San Francisco killing four construction workers, one civilian and injuring 28. According to the statistics from Occupational Safety Health Administration (OSHA), there were 137 crane-related fatalities from 1992 to 2001 in the US. A well-known internet website that keeps track of crane-related accidents (craneaccidents.com), reports 516 accidents and 277 fatalities from 2000 to 2002. These statistics show that even though many measures have been taken to decrease the number of crane-related accidents (Braam, 2002), the number of crane related accidents is still very large. It is important to recognize that each construction related fatality is not only a great human loss but also increases the costs of insurance, lawsuits, and the construction budget due to delay of a project (Paulson 1992)...},
  subject      = {Produktmodell},
  language  = {en}
}
@article{HoltzhauerSaal2004,
  author    = {Holtzhauer, Eric and Saal, Helmut},
  title     = {Product modelling in the steel construction domain},
  doi       = {10.25643/bauhaus-universitaet.241},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2415},
  year      = {2004},
  abstract  = {The complexity of the relationships between the actors of a building project requires high efficiency in communication. Among other things, data sharing is crucial. The exchange of data is made possible by interfaces between expert programs, which rely on product models. The latter are neutral standards with formal definitions of building objects and their attributes. This paper deals with the state of the art and the research activities concerning product models in the steel construction domain and the advantages provided by this technology for the sector.},
  subject      = {Produktmodell},
  language  = {en}
}