@inproceedings{YahiaouiHensenSoethout2004,
  author    = {Yahiaoui, Azzedine and Hensen, Jan and Soethout, Luc},
  title     = {Developing CORBA-based distributed control and building performance environments by run-time coupling},
  doi       = {10.25643/bauhaus-universitaet.134},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1347},
  year      = {2004},
  abstract  = {Communication software and distributed applications for control and building performance simulation software must be reliable, efficient, flexible, and reusable. This paper reports on progress of a project, which aims to achieve better integrated building and systems control modeling in building performance simulation by run-time coupling of distributed computer programs. These requirements motivate the use of the Common Object Request Broker Architecture (CORBA), which offers sufficient advantage than communication within simple abstraction. However, set up highly available applications with CORBA is hard. Neither control modeling software nor building performance environments have simple interface with CORBA objects. Therefore, this paper describes an architectural solution to distributed control and building performance software tools with CORBA objects. Then, it explains how much the developement of CORBA based distributed building control simulation applications is difficult. The paper finishes by giving some recommendations.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{ElRayesKandil2004,
  author    = {El-Rayes, Khaled and Kandil, Amr},
  title     = {Distributed Computing for the Optimization of Large-Scale Construction Projects},
  doi       = {10.25643/bauhaus-universitaet.160},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1601},
  year      = {2004},
  abstract  = {Available construction time-cost trade-off analysis models can be used to generate trade-offs between these two important objectives, however, their application is limited in large-scale construction projects due to their impractical computational requirements. This paper presents the development of a scalable and multi-objective genetic algorithm that provides the capability of simultaneously optimizing construction time and cost large-scale construction projects. The genetic algorithm was implemented in a distributed computing environment that utilizes a recent standard for parallel and distributed programming called the message passing interface (MPI). The performance of the model is evaluated using a set of measures of performance and the results demonstrate the capability of the present model in significantly reducing the computational time required to optimize large-scale construction projects.},
  subject      = {Baubetrieb},
  language  = {en}
}
@inproceedings{WellmannJelicBaitschHartmann2004,
  author    = {Wellmann Jelic, Andres and Baitsch, Matthias and Hartmann, Dietrich},
  title     = {Distributed computing of failure probabilities for structures in civil engineering},
  doi       = {10.25643/bauhaus-universitaet.103},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1030},
  year      = {2004},
  abstract  = {In this contribution the software design and implementation of an analysis server for the computation of failure probabilities in structural engineering is presented. The structures considered are described in terms of an equivalent Finite Element model, the stochastic properties, like e.g. the scatter of the material behavior or the incoming load, are represented using suitable random variables. Within the software framework, a Client-Server-Architecture has been implemented, employing the middleware CORBA for the communication between the distributed modules. The analysis server offers the possibility to compute failure probabilities for stochastically defined structures. Therefore, several different approximation (FORM, SORM) and simulation methods (Monte Carlo Simulation and Importance Sampling) have been implemented. This paper closes in showing several examples computed on the analysis server.},
  subject      = {Konzipieren <Technik>},
  language  = {en}
}
@article{SemenovBazhanMorozov2004,
  author    = {Semenov, Vitaly and Bazhan, Andrew and Morozov, Sergey},
  title     = {Distributed STEP-Compliant Platform for Multimodal Collaboration in Architecture, Engineering, and Construction},
  doi       = {10.25643/bauhaus-universitaet.261},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2616},
  year      = {2004},
  abstract  = {This paper presents an innovative software platform OpenSTEP intended to build advanced distributed integrated systems and to conduct multidisciplinary collaborative projects in both academy and industry. The paper discusses an open system architecture, methodology, component library and CASE toolkit enabling the developers to build a wide range of interoperable applications and systems compliant with STEP and, particularly, with IFC becoming the increasingly important standard for information integration in architecture, engineering and construction.},
  subject      = {Framework <Informatik>},
  language  = {en}
}
@inproceedings{GebbekenBaumhauerIonita2004,
  author    = {Gebbeken, Norbert and Baumhauer, Andreas and Ionita, Mihai},
  title     = {Increasing the Reliability and Performance through Automatization and Parallel Working},
  doi       = {10.25643/bauhaus-universitaet.139},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1397},
  year      = {2004},
  abstract  = {Re-examination of the behaviour of structures can be necessary due to deterioration or changes in the traffic situation during their lifetime. The Finite Element Method (FEM) is widely used in order to accomplish numerical analysis. Considering the development of computer performance, more detailed FEM models can be analyzed, even on site, with mobile computers. To compensate the increasing amount of data needed for the model input, measures need to be taken to save time, by distributing the work. In order to provide consistency to the model, fedback data must be checked upon reception. A local wireless computer network of ultra-portable devices linked together with a computer can provide the coordination necessary for efficient parallel working. Based on a digital model consisting of all data gathered, structural modelling and numerical analysis are performed automatically. Thus, the user is released from the work that can be automatized and the time needed for the overall analysis of a structure is decreased.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{Rodriguez2004,
  author    = {Rodriguez, Adhamina},
  title     = {Information Exchange in The Construction Industry : The Particular Case of Green Buildings},
  doi       = {10.25643/bauhaus-universitaet.175},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1757},
  year      = {2004},
  abstract  = {Construction is a conservative industry that over the last twenty ye ars has experienced drastic changes in the way that interdisciplinary teams interact to design and execute a project. In this article we offer a general overview of how the main participants cooperate in the different phases of a construction project, and which are some of the main areas for communication improvement. We also explore the communication tools used in the exchange of information, and identify the main causes of information breakdown. The general framework of this study is of application to both standard and green projects. At the end of the article we discuss the peculiarities of green buildings. Our goal is to offer a series of industry insights derived from the perspective of a general contractor aimed at identifying the areas where contributions in computing and information exchange could have a greater impact on the successful completion of a project.},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{PetersenDiaz2004,
  author    = {Petersen, Michael and Diaz, Joaquin},
  title     = {Integrated planning of buildings based on computer models in project communication systems},
  doi       = {10.25643/bauhaus-universitaet.176},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1762},
  year      = {2004},
  abstract  = {The increasing demands in building and civil engineering - with regard to the growing amount of legal requirements and the needs of a flexible usage of the building - requires an optimisation of all processes during the planning and construction phases. This aim can be only reached by transferring of innovative information and communication technologies in the field of cooperation of all partners in a building project. In this article the enhancement of the existing planning processes based on an improved information management is introduced. Since the late 90ies the availability of hardware and software infrastructures for a networkbased cooperation, e.g. email, in small and middle-sized companies increased the problems of an unstructured communication in the planning and construction processes. These problems have not been solved by the usage of the upcoming project communication systems either, which are often used as a simple medium for data transfer. Because of the easy way of distributing documents to all planning partners a huge amount of files and subsequent versions can be stored so that the planners often have to scope with an information overflow. The underlying hierarchical structures based on simple files stored in tree views are not sufficient for an adequate representation of the different specific views of the planners and the management of relationships between the three information domains building structure, costs and time schedules. ..},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{HauschildBorrmannHuebler2004,
  author    = {Hauschild, Thomas and Borrmann, Andr{\´e} and H{\"u}bler, Reinhard},
  title     = {Integration of Constraints into Digital Building Models for Cooperative Planning Processes},
  doi       = {10.25643/bauhaus-universitaet.177},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1775},
  year      = {2004},
  abstract  = {The uniqueness and the long life cycle of buildings imply a dynamically modifiable building model. The technological foundation for the management of digital building models, a dynamic model management system (MMS), developed by our research group, allows to explicitly access and to modify the object model of the stored planning data. In this paper, the integration of constraints in digital building models will be shown. Constraints are conditions, which apply to the instances of domain model classes, and are defined by the user at runtime of the information system. For the expression of constraints, the Constraint Modelling Language (CML) has been developed and will be described in this paper. CML is a powerful, intuitively usable object-oriented language, which allows the expression of constraints at a high semantic level. A constrained-enabled MMS can verify, whether an instance fulfils the applying constraints. To ensure flexibility, the evaluation of constraints is not implicitly performed by the systems, but explicitly initiated by the user. A classification of constraint types and example usage scenarios are given.},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{HartmannMeissnerRueppel2004,
  author    = {Hartmann, Dietrich and Meißner, Udo F. and Rueppel, Uwe},
  title     = {Integration of Productmodel Databases into Multi-Agent Systems},
  doi       = {10.25643/bauhaus-universitaet.141},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1410},
  year      = {2004},
  abstract  = {This paper deals with two different agent-based approaches aimed at the incorporation of complex design information into multi-agent planning systems. The first system facilitates collaborative structural design processes, the second one supports fire engineering in buildings. Both approaches are part of two different research projects that belong to the DFG1 priority program 1103 entitled "Network-based Co-operative Planning Processes in Structural Engineering" (DFG 2000). The two approaches provide similar database wrapper agents to integrate relevant design information into two multi-agent systems: Database wrapper agents make the relevant product model data usable for further agents in the multi-agent system, independent on their physical location. Thus, database wrapper agents act as an interface between multi-agent system and heterogeneous database systems. The communication between the database wrapper agents and other requesting agents presumes a common vocabulary: a specific database ontology that maps database related message contents into database objects. Hereby, the software-wrapping technology enables the various design experts to plug in existing database systems and data resources into a specific multi-agent system easily. As a consequence, dynamic changes in the design information of large collaborative engineering projects are adequately supported. The flexible architecture of the database wrapper agent concept is demonstrated by the integration of an XML and a relational database system.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{SchinkKoch2004,
  author    = {Schink, Claus-J{\"u}rgen and Koch, Volker},
  title     = {Interdisciplinary Cooperation Modules in Mobile Networks},
  doi       = {10.25643/bauhaus-universitaet.178},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1788},
  year      = {2004},
  abstract  = {The contribution describes the didactical integration of wireless access networks for the campus of the University of Karlsruhe in the education of architects and engineers. It focuses on the development of an interdisciplinary communication network to encourage and promote the communication and collaboration between students. The project assumes that significant learning progresses in net-based learning scenarios are based upon the synchronous and asynchronous cooperation between the students themselves. The remote cooperation across borders of disciplines makes high demands on capacity in communicating and cooperating of the involved persons as well as on the supporting tools. Therefore, the collective acquisition of knowledge and cooperation has to be trained intensively during the studies. Based on the design and project oriented cooperation platform netzentwurf.de the authors developed the tools "Jobadmin" to administrate multidisciplinary workgroups, the "Swarm Knowledge Catalogue" to collect and store knowledge and "LivingCampus", an instrument providing basic services for dynamic communication.},
  subject      = {Architektur},
  language  = {en}
}