@article{Koenig2011,
  author    = {K{\"o}nig, Reinhard},
  title     = {Generierung von Grundriss-Layouts mittels hybrider Evolutions-Strategie},
  doi       = {10.25643/bauhaus-universitaet.806},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20110414-15425},
  year      = {2011},
  abstract  = {Der vorliegende Text beschreibt ein computerbasiertes Verfahren zur L{\"o}sung von Layout-problemen in Architektur und St{\"a}dtebau, welches mit m{\"o}glichst wenig Problemwissen auskommt und schnell brauchbare Ergebnisse liefert, die durch schrittweises Hinzuf{\"u}gen von Problemwissen interaktiv weiter ausgearbeitet werden k{\"o}nnen. F{\"u}r das generative Verfahren wurde eine Evolutions-Strategie verwendet, die mit Mechanismen zur Kollisionserkennung und virtuellen Federn zu einem hybriden Algorithmus kombiniert wurde. Dieser dient erstens der L{\"o}sung des Problems der Dichten Packung von Rechtecken sowie zweitens der Herstellung bestimmter topologischer Beziehungen zwischen diesen Rechtecken. Die Bearbeitung beider Probleme wird durch schrittweise Erweiterung grundlegender Verfahren untersucht, wobei die einzelnen Schritte anhand von Performancetests miteinander verglichen werden. Am Ende wird ein iterativer Algorithmus vorgestellt, der einerseits optimale L{\"o}sungen garantiert und andererseits diese L{\"o}sungen in einer f{\"u}r eine akzeptable Nutzerinteraktion ausreichenden Geschwindigkeit generiert.},
  subject      = {CAD},
  language  = {de}
}
@article{JentschKulleBodeetal.,
  author    = {Jentsch, Mark F. and Kulle, Christoph and Bode, Tobias and Pauer, Toni and Osburg, Andrea and Namgyel, Karma and Euthra, Karma and Dukjey, Jamyang and Tenzin, Karma},
  title     = {Field study of the building physics properties of common building types in the Inner Himalayan valleys of Bhutan},
  series = {Energy for Sustainable Development 38},
  journal   = {Energy for Sustainable Development 38},
  doi       = {10.25643/bauhaus-universitaet.3139},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170419-31393},
  pages     = {48 -- 66},
  abstract  = {Traditionally, buildings in the Inner Himalayan valleys of Bhutan were constructed from rammed earth in the western regions and quarry stone in the central and eastern regions. Whilst basic architectural design elements have been retained, the construction methods have however changed over recent decades alongside expectations for indoor thermal comfort. Nevertheless, despite the need for space heating, thermal building performance remains largely unknown. Furthermore, no dedicated climate data is available for building performance assessments. This paper establishes such climatological information for the capital Thimphu and presents an investigation of building physics properties of traditional and contemporary building types. In a one month field study 10 buildings were surveyed, looking at building air tightness, indoor climate, wall U-values and water absorption of typical wall construction materials. The findings highlight comparably high wall U-values of 1.0 to 1.5 W/m²K for both current and historic constructions. Furthermore, air tightness tests show that, due to poorly sealed joints between construction elements, windows and doors, many buildings have high infiltration rates, reaching up to 5 air changes per hour. However, the results also indicate an indoor climate moderating effect of more traditional earth construction techniques. Based on these survey findings basic improvements are being suggested.},
  subject      = {Luftdichtheit},
  language  = {en}
}
@article{LikhitruangsilpIoannou2004,
  author    = {Likhitruangsilp, Veerasak and Ioannou, Photios},
  title     = {Risk-sensitive Markov Decision Process for Underground Construction Planning and Estimating},
  doi       = {10.25643/bauhaus-universitaet.224},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2247},
  year      = {2004},
  abstract  = {This paper presents an application of dynamic decision making under uncertainty in planning and estimating underground construction. The application of the proposed methodology is illustrated by its application to an actual tunneling project—The Hanging Lake Tunnel Project in Colorado, USA. To encompass the typical risks in underground construction, tunneling decisions are structured as a risk-sensitive Markov decision process that reflects the decision process faced by a contractor in each tunneling round. This decision process consists of five basic components: (1) decision stages (locations), (2) system states (ground classes and tunneling methods), (3) alternatives (tunneling methods), (4) ground class transition probabilities, and (5) tunneling cost structure. The paper also presents concepts related to risk preference that are necessary to model the contractor's risk attitude, including the lottery concept, utility theory, and the delta property. The optimality equation is formulated, the model components are defined, and the model is solved by stochastic dynamic programming. The main results are the optimal construction plans and risk-adjusted project costs, both of which reflect the dynamics of subsurface construction, the uncertainty about geologic variability as a function of available information, and the contractor's risk preference.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{YabukiKotaniShitani2004,
  author    = {Yabuki, Nobuyoshi and Kotani, Jun and Shitani, Tomoaki},
  title     = {A Steel Bridge Design System Architecture using VR-CAD and Web Service-based Multi-Agents},
  doi       = {10.25643/bauhaus-universitaet.214},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2146},
  year      = {2004},
  abstract  = {This paper presents a new design environment based on Multi-Agents and Virtual Reality (VR). In this research, a design system with a virtual reality function was developed. The virtual world was realized by using GL4Java, liquid crystal shutter glasses, sensor systems, etc. And the Multi-Agent CAD system with product models, which had been developed before, was integrated with the VR design system. A prototype system was developed for highway steel plate girder bridges, and was applied to a design problem. The application verified the effectiveness of the developed system.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{WehnerSteinmannHuebler1997,
  author    = {Wehner, R. and Steinmann, Frank and H{\"u}bler, Reinhard},
  title     = {FLEXOB - Entwicklungstool f{\"u}r dynamische, modellbasierte CAD-Systeme},
  doi       = {10.25643/bauhaus-universitaet.457},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4571},
  year      = {1997},
  abstract  = {Objektorientierte Modellierungstechniken werden gegenw{\"a}rtig vor allem Entwicklern von CAD-Systemen angeboten. Sie erzeugen {\"u}ber die Schritte OO-Modellanalyse und OO-Softwaredesign OO-Programme, die mit ihrer Compilation das durch den Softwareingenieur gefundene Modell festschreiben. Generell, aber insbesondere im Bauwerksdesign, ist dieses Vorgehen unbefriedigend, da hier eine Normung von Modellen nicht gelingt, der Entwurfsprozeß vergleichsweise lang ist und eine Kooperation von Ingenieurgewerken mit verschiedenen Modelldom{\"a}nen die Regel sind. Dar{\"u}ber hinaus weisen die Modelle in fr{\"u}hen Phasen ein hohes Maß an Unsch{\"a}rfe und Abstraktion auf. CAD-Tools, die diese Phasen unterst{\"u}tzen, ben{\"o}tigen deshalb: statt eines genormten Produktmodells ein einheitliches, kognitiv begr{\"u}ndetes Modellstrukturierungsparadigma, f{\"u}r das mit der Objektorientierung eine m{\"o}gliche Auspr{\"a}gung gegeben ist, ein explizites, verf{\"u}gbares Dom{\"a}nenmodell zur fortw{\"a}hrenden Interpretation von Bauwerksmodellen, deskriptive Elemente, die die Interpretation von Objekten und Attributen erleichtern, ein Konzept zur Behandlung von Unsch{\"a}rfe und Abstraktion. Hieraus ergeben sich f{\"u}r die Entwicklung von CAD-Systemen folgende Forderungen : Explizite Verf{\"u}gbarkeit von Klassenobjekten und deren Erzeugung und Ver{\"a}nderung zur Laufzeit, Vererbung auf Klassen- und Instanzniveau, Erweiterte Attributkonzepte (Facetten), Unterst{\"u}tzung der Aggregation als einer wesentlichen Modellstrukturierungsrelation, Verf{\"u}gbarkeit von OO-Schnittstellen zum Aufbau von CAD-Systemen aus Tools einerseits, sowie zur Trennung von Modellverwaltung und Modellrepr{\"a}sentation andererseits. Als ein herausragendes Merkmal des Objektorientierten Paradigmas wird die Anwendungsn{\"a}he genannt, da Erscheinungen der behandelten Dom{\"a}ne sich analog in Modellen und Programmen wiederfinden (sollen). Unter der Grundannahme, daß dieses Paradigma auch durch den Anwender zur Erstellung seiner Modellwelten verwendet wird, will FLEXOB eine homogene Umgebung schaffen, die die Modellwelt des Softwareingenieurs zu Analysezwecken dem Anwender zur Verf{\"u}gung stellt und die die Erweiterung dieser Modellwelt auf deskriptivem Niveau erm{\"o}glicht. Das Tool FLEXOB und einige wesentliche Implementationsdetails werden im Beitrag vorgestellt. Es handelt sich bei diesem Tools um eine C++ Klassenbibliothek, die entweder als Objektmodul oder als Windows-DLL verwendet werden kann. Aspekte des Nutzungsregimes solch flexibler Modellverwaltungen werden im Beitrag ebenfalls angespochen.},
  subject      = {CAD},
  language  = {de}
}
@article{vanTreeckRank2004,
  author    = {van Treeck, Christoph and Rank, Ernst},
  title     = {Analysis of building structure and topology based on Graph Theory},
  doi       = {10.25643/bauhaus-universitaet.230},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2308},
  year      = {2004},
  abstract  = {Individual views on a building product of people involved in the design process imply different models for planning and calculation. In order to interpret these geometrical, topological and semantical data of a building model we identify a structural component graph, a graph of room faces, a room graph and a relational object graph as aids and we explain algorithms to derive these relations. The application of the technique presented is demonstrated by the analysis and discretization of a sample model in the scope of building energy simulation.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{SemarSchoenhardtWitt2005,
  author    = {Semar, Olivier and Sch{\"o}nhardt, Matthias and Witt, Karl Josef},
  title     = {Climatic induced changes of radiological and chemical properties in an uranium tailing deposit - Equipment and first results -},
  doi       = {10.25643/bauhaus-universitaet.814},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-8146},
  year      = {2005},
  abstract  = {Monitoring systems usually used to control tailings, primarily pore water pressure gages and observation wells, are not self evidently representative for mechanical considerations. Therefore an effective risk assessment and risk management is necessary to get additional information to determine indicators for critical situations. Several tailings observations showed an alteration in chemical and radiological parameters during rising saturation induced by climatic changes. These parameters are appropriate to stress indices. A systematically research on correlations between changes in stress indices and the phreatic surface is part of the research activities of the Bauhaus University in Weimar. The contribution presents the principle of this kind of monitoring, the soil mechanical background, details of the equipment and first results.},
  subject      = {Monitoring},
  language  = {en}
}
@article{Lizounov1997,
  author    = {Lizounov, P. P.},
  title     = {Dynamics of solid and deformable Bodies Systems at complex Movements},
  doi       = {10.25643/bauhaus-universitaet.541},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-5410},
  year      = {1997},
  abstract  = {Analytical models, describing oscillations of systems of interconnected solid and deformable bodies,making a complex movement in fields of inertia forces and gravitation forces, are resulted. Method of numerical investigation of dynamics of the specified systems, based on sharing of parameter prolongation method, Newton-Kantorovich algorithm, Flocke and Liapunov hteories, is developed. On the basis of constructed analytical models and numerical techniques a new, practically important problems of dynamics of systems, consisting of solid bodies, flexible rods, membranes and soft shells, which make a complex movement in fields of forces of inertia and gravity are solved. The received results are used during designing of responsible elements of structures, making a complex movement, which find application in construction and mechanical engineering.},
  subject      = {Festk{\"o}rpermechanik},
  language  = {en}
}
@article{WeiseKatranuschkovScherer2004,
  author    = {Weise, Matthias and Katranuschkov, Peter and Scherer, Raimar J.},
  title     = {Generic Services for the Support of Evolving Building Model Data},
  doi       = {10.25643/bauhaus-universitaet.207},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2077},
  year      = {2004},
  abstract  = {Many problems related to data integration in AEC can be better tackled by an approach that takes into account the heterogeneity of tasks, models and applications but does not require continuous consistency of the evolving design data, at each data management operation. Such an approach must incorporate adequate services that can facilitate reintegration of concurrently modified data at reasonably selected coordination points. In this paper we present a set of methods which, used in combination, can achieve that goal. After a description of the principal envisaged cooperative work scenario each of these methods is discussed in detail and current observations drawn from their software realisation are given. Whilst the suggested approach is valid for any EXPRESS-based data model, the practical focus of work has been on facilitating IFC-driven integration.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{Abdalla2004,
  author    = {Abdalla, Jamal},
  title     = {Elements of an Agent-based Mediative Communication Protocol for Design Objects},
  doi       = {10.25643/bauhaus-universitaet.220},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2207},
  year      = {2004},
  abstract  = {Integrated structural engineering system usually consists of large number of design objects that may be distributed across different platforms. These design objects need to communicate data and information among each other. For efficient communication among design objects a common communication protocol need to be defined. This paper presents the elements of a communication protocol that uses a mediator agent to facilitate communication among design objects. This protocol is termed the Mediative Communication Protocol (MCP). The protocol uses certain design communication performatives and the semantics of an Agent Communication language (ACL) mainly the Knowledge and Query Manipulation Language (KQML) to implement its steps. Details of a Mediator Agent, that will facilitate the communication among design objects, is presented. The Unified Modeling Language (UML) is used to present the Meditative protocol and show how the mediator agent can be use to execute the steps of the meditative communication protocol. An example from structural engineering application is presented to demonstrate and validate the protocol. It is concluded that the meditative protocol is a viable protocol to facilitate object-to-object communication and also has potential to facilitate communication among the different project participants at the higher level of integrated structural engineering systems.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{GaoWuRen2004,
  author    = {Gao, Zuoren and Wu, Weiyu and Ren, Aizhu},
  title     = {Physically Based Modeling and Multi-Physical Simulation System for Wood Structure Fire Performance},
  doi       = {10.25643/bauhaus-universitaet.238},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2381},
  year      = {2004},
  abstract  = {This research is devoted to promoting the performance-based engineering in wood structure fire. It looks into the characteristic of the material, structural composing and collapse detecting to find out the main factors in the wood structure collapse in fire. The aim of the research is to provide an automatic simulation platform for the complicated circulation. A physically based model for slim member for beams and columns and a frame of multi-physical simulation are provided to implement the system. The physically based model contains material model, structural mechanics model, material mechanics model, as well as geometry model for the compositive simulation. The multi-physical simulation is built on the model and has the capacity to carry out a simulation combining structural, fire (thermal, CFD) and material degradation simulation. The structural and fire simulation rely on two sophisticated software respectively, ANSYS (an FEA software) and FDS (with a core of CFD). Researchers of the paper develop system by themselves to combine the two existing ones. The system has the capability to calculate the wood char to find out the loss of cross-section and to detect the collapse caused in different ways. The paper gives a sample of Chinese traditional house to show how this simulation system works.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{TakagiTaniKawamura2004,
  author    = {Takagi, Kousuke and Tani, Akinori and Kawamura, Hiroshi},
  title     = {Research on Intelligent Fuzzy Optimal Active and Hybrid Control Systems of Building Structures - Verification of Optimization Method on Switching Rules of Control Forces},
  doi       = {10.25643/bauhaus-universitaet.223},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2238},
  year      = {2004},
  abstract  = {Recently, many reseraches on active control systems of building structures are preformed based on modern control theory and are installed real buildings. The authors have already proposed intelligent fuzzy optimal active control (IFOAC) systems. IFOAC systems imitate intelligent activities of human brains such as prediction, adaptation, decision-kaking and so on. In IFOAC systems, objective and subjective judgements on the active control can be taken into account. However, IFOAC systems are considered to be suitable for far-field erathquake and control effect becomes small in case of near-field earthqaukes which include a few velosity pules with large amplitudes. To improve control effect in case of near-souece earthquakes, the authors have also proposed hybrid control (HC) systems, in which IFOAC systems and fuzzy control system are combined. In HC systems, the fuzzy control systems are introduced as a reflective fuzzy active control (RFAC) system and imitates spinal reflection of human. In HC systems, active control forces are activated to buildings in accordance with switching rules on active control forces. In this paper, optimizations on fuzzy control rules in RFAC system and switching rules of active control forces in HC system are performed by Parameter-Free Genetic Algorithms (PfGAs). Here, the optimization is performed by using different earthquake inputs. The results of digital simulations show that the HC system can reduce maximal response displacements under restrictions on strokes of the actuator effectively in case of a near-source earthquake and the effectiveness of the proposed HC system is discussed and clarified.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{WillenbacherHuebler2004,
  author    = {Willenbacher, Heiko and H{\"u}bler, Reinhard},
  title     = {Intelligent Link-Management for the Support of Integration in Building Life Cycle},
  doi       = {10.25643/bauhaus-universitaet.222},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2223},
  year      = {2004},
  abstract  = {The processes in the life cycle of buildings are characterised by highly distinct teamwork. The integration of all the distributed working participants, by providing an environment, which especially supports the communication and collaboration between the actors, is a fundamental step to improve the efficiency of the involved processes and to reduce the total costs. In this article, a link based modelling approach and its "intelligent" link management is introduced (1). This approach realises an integration environment based on a special building model that acts as a decision support system. The link-based modelling is characterised by the definition and specialisation of links between partial models. These intelligent managed links enable a very flexible and task specific data access and exchange between all the different views and partial models of the participants.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{MotawaAnumbaElHamalawi2004,
  author    = {Motawa, Ibrahim and Anumba, Chimay and El-Hamalawi, A.},
  title     = {Development of a Fuzzy System for Change Prediction in Construction Projects},
  doi       = {10.25643/bauhaus-universitaet.218},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2180},
  year      = {2004},
  abstract  = {Change management has been the focus of different IT systems. These IT systems were developed to represent design information, record design rationale, facilitate design coordination and changes. They are largely based on managing reactive changes, particularly design changes, in which changes are recorded and then propagated to the relevant project members. However, proactive changes are hardly dealt with in IT systems. Proactive changes require estimating the likelihood of occurrence of a change event as well as estimating the degree of change impacts on project parameters. Changes in construction projects often result from the uncertainty associated with the imprecise and vague knowledge of much project information at the early stages of projects. This is a major outcome of the case studies carried out as part of this research. Therefore, the proposed model considers that incomplete knowledge and certain project characteristics are always behind change causes. For proactive changes, predicting a change event is the main task for modelling. The prediction model should strive to integrate these main elements: 1) project characteristics that lead to change 2) causes of change, 3) the likelihood of change occurrence, and 4) the change consequences. It should also define the dependency relationships between these elements. However, limited data (documented) are only available from previous projects for change cases and many of the above elements can only be expressed in linguistic terms. This means that the model will simulate the uncertainty and subjectivity associated with these sets of elements. Therefore, a fuzzy model is proposed in this research to capture these elements. The model analyses the impact of each set of elements on the other by assigning fuzzy values for these elements that express the uncertainty and subjectivity of their impact. The main aim is to predict change events and evaluate change effects on project parameters. The fuzzy model described above was developed in an IT system for operational purposes and was designed as a Java package of components with their supporting classes, beans, and files. This paper describes the development and the architecture of the proposed IT system to achieve these requirements. The system is intended to help project teams in dealing with change causes and then the change consequences in construction projects.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{FoorgberMueller1997,
  author    = {Foorgber, U. and M{\"u}ller, Christian},
  title     = {A Planning Process Model for Computer Supported Cooperative Work in Building Construction},
  doi       = {10.25643/bauhaus-universitaet.492},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4922},
  year      = {1997},
  abstract  = {Increasing complexity of today's buildings requires a high level of integration in the planning process. Common planning strategies, where individual project partners cooperate mainly to exchange results, are not suitable to jointly develop project goals and objectives. Integrated planning, a more holistic approach to deal with complex problems, is based on a high degree of communication amoung team members and leads to a goal oriented cooperation. Current approaches in the reasearch area of Computer Supported Cooperative Work (CSCW) poorly meet the requirements in planning. A planning process model, based on the principles of integrated planning will be introduced, aimed to provide the background for the implementation of a CSCW-platform.},
  subject      = {Bauwesen},
  language  = {en}
}
@article{YabukiYoshimura2004,
  author    = {Yabuki, Nobuyoshi and Yoshimura, Yutaka},
  title     = {An Evaluation System for Steel Structures of Hydroelectric Power Stations based on Fault Tree Analysis and Performance Maps},
  doi       = {10.25643/bauhaus-universitaet.256},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2564},
  year      = {2004},
  abstract  = {This paper presents an evaluation system for steel structures of hydroelectric power stations, including hydraulic gates and penstocks, based on Fault Tree Analyasis (FTA) and performance maps. This system consists of fault tree diagrams of FTA, performance maps, design and analysis systems, and engineerin databases. These four modules are integrated by appropriate hyperlinks so that the user of this system can use it easily and seamlessly. A well developed system was applied to some illustrative example cases, and they showed that the developed methodology and system worked well and the users found the system useful and effective for their maintenance tasks at powerstations.},
  subject      = {Wissensmanagement},
  language  = {en}
}
@article{KicingerArciszewskiDeJong2004,
  author    = {Kicinger, Rafal and Arciszewski, Tomasz and De Jong, Kenneth},
  title     = {Distributed Evolutionary Design: Island-Model-based Optimization of Steel Skeleton Structures in Tall Buildings},
  doi       = {10.25643/bauhaus-universitaet.219},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2195},
  year      = {2004},
  abstract  = {This paper presents results of a study on distributed, or parallel, evolutionary computation in the topological design of steel structural systems in tall buildings. It describes results of extensive experimental research on various parallel evolutionary architectures applied to a complex structural design problem. The experiments were conducted using Inventor 2003, a networkbased evolutionary design support tool developed at George Mason University. First, a general introduction to evolutionary computation is provided with an emphasis on recent developments in parallel evolutionary architectures. Next, a discussion of conceptual design of steel structural systems in tall buildings is presented. Further, Inventor 2003 is briefly introduced as well as its design representation and evolutionary computation characteristics. Next, the results obtained from systematic design experiments conducted with Inventor 2003 are discussed. The objective of these experiments was to qualitatively and quantitatively investigate evolution of steel structural systems in tall buildings during a distributed evolutionary design process as well as to compare efficiency and effectiveness of various parallel evolutionary architectures with the traditional evolutionary design approaches. Two connectivity topologies (ring topology and fully-connected topology) have been investigated for four populations of structural designs evolving in parallel and using various migration strategies. Also, results of the initial sensitivity studies are reported in which two ways of initializing distributed evolutionary design processes were investigated, using either arbitrarily selected designs as initial parents or randomly generated ones. Finally, initial research conclusions are presented.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{MilbradtSchierbaumSchwoeppe2004,
  author    = {Milbradt, Peter and Schierbaum, Jochen and Schw{\"o}ppe, Axel},
  title     = {Finite Cell-Elements of Higher Order},
  doi       = {10.25643/bauhaus-universitaet.252},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2524},
  year      = {2004},
  abstract  = {The method of the finite elements is an adaptable numerical procedure for interpolation as well as for the numerical approximation of solutions of partial differential equations. The basis of these procedure is the formulation of suitable finite elements and element decompositions of the solution space. Classical finite elements are based on triangles or quadrangles in the two-dimensional space and tetrahedron or hexahedron in the threedimensional space. The use of arbitrary-dimensional convex and non-convex polyhedrons as the geometrical basis of finite elements increases the flexibility of generating finite element decompositions substantially and is sometimes the only way to get a clear decomposition...},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{ElRayesHyari2004,
  author    = {El-Rayes, Khaled and Hyari, Khalied},
  title     = {A Multi-objective Model for Optimizing Construction Planning of Repetitive Infrastructure Projects},
  doi       = {10.25643/bauhaus-universitaet.213},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2135},
  year      = {2004},
  abstract  = {This paper presents the development of a model for optimizing resource utilization in repetitive infrastructure projects. The model provides the capability of simultaneous minimization of both project duration and work interruptions for construction crews. The model provides in a single run, a set of nondominated solutions that represent the tradeoff between these two objectives. The model incorporates a multiobjective genetic algorithm and scheduling algorithm. The model initially generates a randomly selected set of solutions that evolves to a near optimal set of tradeoff solutions in subsequent generations. Each solution represents a unique scheduling solution that is associated with certain project duration and a number of interruption days for utilized construction crews. As such, the model provides project planners with alternative schedules along with their expected duration and resource utilization efficiency.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{Rueppel1997,
  author    = {R{\"u}ppel, Uwe},
  title     = {Multimediale Gestaltung von Bestandsverwaltungsprozessen im Bauwesen},
  doi       = {10.25643/bauhaus-universitaet.483},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-4839},
  year      = {1997},
  abstract  = {Die Kosten f{\"u}r die Unterhaltung von Bauwerken {\"u}ber den Lebenszyklus sind im Vergleich zu den Planungs- und Herstellungskosten erheblich gr{\"o}ßer. Insbesondere setzt eine Reduzierung des Instandhaltungsaufwandes als Teilprozeß der Bestandsverwaltung das rechtzeitige Erkennen von Bausch{\"a}den und das vorausschauende Ergreifen von Gegenmaßnahmen voraus. Das planm{\"a}ßige Vorgehen beim Erkennen von Bausch{\"a}den, d.h. die regelm{\"a}ßige {\"U}berwachung baulicher Anlagen, dient nicht nur dem sparsamen Umgang mit vorhandenen Mitteln, sondern verringert auch die Gefahr des pl{\"o}tzlichen Versagens von tragenden Bauteilen. Dadurch werden Gefahren f{\"u}r die Nutzer der Bauwerke fr{\"u}hzeitig abgewendet. Die Notwendigkeit der systematischen Instandhaltung mit modernen Methoden wird auch in den Schlußfolgerungen des dritten Bauschadensberichts des Bundesministeriums f{\"u}r Raumordnung, Bauwesen und St{\"a}dtebau unterstrichen. Um den Zustand eines Bauteils festzustellen, werden ausreichende Informationen {\"u}ber Struktur, Material, Alter, Belastungen, Umweltbedingungen etc. ben{\"o}tigt. Zur Verarbeitung dieser F{\"u}lle von Informationen unterschiedlichen Typs (z.B. technische Dokumente, CAD-Zeichnungen, Photos etc.) bei der {\"U}berwachung und Dokumentation baulicher Anlagen ist eine geeignete DV-Unterst{\"u}tzung notwendig. Zur Verwaltung der komplexen Baustrukturinformationen werden objektorientierte Bauwerksmodelle ben{\"o}tigt. Zur bedarfsgerechten Aufbereitung der unterschiedlichen Informationsarten und -qualit{\"a}ten ist zus{\"a}tzlich eine multimediale Informationsverarbeitung sowohl intern als auch in der Benutzungsschnittstelle erforderlich. Im Beitrag werden die Grundlagen objektorientierter Methoden zur Bauwerksmodellierung sowie von Multimedia mit den Bereichen Text, Graphik (Vektor- und Pixelgraphik), Audio, Photo und Video einschließlich deren Verkn{\"u}pfungsm{\"o}glichkeiten im Sinne von Hypermedia an Beispielen erl{\"a}utert. Zus{\"a}tzlich werden aktuelle Entwicklungstendenzen im Bereich der Telekommunikation mit den M{\"o}glichkeiten des Computernetzes INTERNET zur Bestandsverwaltung in verteilten Systemen aufgezeigt. Abschließend werden Anwendungen der objektorientierten und multimedialen Informationsverarbeitung in der t{\"a}glichen Ingenieurpraxis am Beispiel des DV-Systems BestandManager zur {\"U}berwachung und Dokumentation baulicher Anlagen vorgestellt.},
  subject      = {Bauwerk},
  language  = {de}
}