@inproceedings{Scheiber,
  author    = {Scheiber, Frank},
  title     = {ROBUSTNESS IN CIVIL ENGINEERING - INFLUENCES OF THE STRUCTURAL MODEL ON THE EVALUATION OF THE STRUCTURAL ROBUSTNESS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2784},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27845},
  pages     = {13},
  abstract  = {The topic of structural robustness is covered extensively in current literature in structural engineering. A few evaluation methods already exist. Since these methods are based on different evaluation approaches, the comparison is difficult. But all the approaches have one in common, they need a structural model which represents the structure to be evaluated. As the structural model is the basis of the robustness evaluation, there is the question if the quality of the chosen structural model is influencing the estimation of the structural robustness index. This paper shows what robustness in structural engineering means and gives an overview of existing assessment methods. One is the reliability based robustness index, which uses the reliability indices of a intact and a damaged structure. The second one is the risk based robustness index, which estimates the structural robustness by the usage of direct and indirect risk. The paper describes how these approaches for the evaluation of structural robustness works and which parameters will be used. Since both approaches needs a structural model for the estimation of the structural behavior and the probability of failure, it is necessary to think about the quality of the chosen structural model. Nevertheless, the chosen model has to represent the structure, the input factors and reflect the damages which occur. On the example of two different model qualities, it will be shown, that the model choice is really influencing the quality of the robustness index.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{NechytailoHorokhovKushchenko,
  author    = {Nechytailo, Oleksandr and Horokhov, Yevgen and Kushchenko, Vladimir},
  title     = {ANALYSIS OF THE MODE OF DEFORMATION OF THE SUB-PULLEY STRUCTURES ON SHAFT SLOPING HEADGEAR STRUCTURES},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2782},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27826},
  pages     = {16},
  abstract  = {A numerical analysis of the mode of deformation of the main load-bearing components of a typical frame sloping shaft headgear was performed. The analysis was done by a design model consisting of plane and solid finite elements, which were modeled in the program «LIRA». Due to the numerical results, the regularities of local stress distribution under a guide pulley bearing were revealed and parameters of a plane stress under both emergency and normal working loads were determined. In the numerical simulation, the guidelines to improve the construction of the joints of guide pulleys resting on sub-pulley frame-type structures were established. Overall, the results obtained are the basis for improving the engineering procedures of designing steel structures of shaft sloping headgear.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{LahmerGhorashi,
  author    = {Lahmer, Tom and Ghorashi, Seyed Shahram},
  title     = {XFEM-BASED CRACK IDENTIFICATION APPLYING REGULARIZING METHODS IN A MULTILEVEL APPROACH},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2771},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27717},
  pages     = {9},
  abstract  = {Many structures in different engineering applications suffer from cracking. In order to make reliable prognosis about the serviceability of those structures it is of utmost importance to identify cracks as precisely as possible by non-destructive testing. A novel approach (XIGA), which combines the Isogeometric Analysis (IGA) and the Extended Finite Element Method (XFEM) is used for the forward problem, namely the analysis of a cracked material, see [1]. Applying the NURBS (Non-Uniform Rational B-Spline) based approach from IGA together with the XFEM allows to describe effectively arbitrarily shaped cracks and avoids the necessity of remeshing during the crack identification problem. We want to exploit these advantages for the inverse problem of detecting existing cracks by non-destructive testing, see e.g. [2]. The quality of the reconstructed cracks however depends on two major issues, namely the quality of the measured data (measurement error) and the discretization of the crack model. The first one will be taken into account by applying regularizing methods with a posteriori stopping criteria. The second one is critical in the sense that too few degrees of freedom, i.e. the number of control points of the NURBS, do not allow for a precise description of the crack. An increased number of control points, however, increases the number of unknowns in the inverse analysis and intensifies the ill-posedness. The trade-off between accuracy and stability is aimed to be found by applying an inverse multilevel algorithm [3, 4] where the identification is started with short knot vectors which successively will be enlarged during the identification process.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Keitel,
  author    = {Keitel, Holger},
  title     = {QUANTIFYING THE QUALITY OF PARTIAL MODEL COUPLING AND ITS EFFECT ON THE SIMULATED STRUCTURAL BEHAVIOR},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2768},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27689},
  pages     = {11},
  abstract  = {The process of analysis and design in structural engineering requires the consideration of different partial models, for example loading, structural materials, structural elements, and analysis types. The various partial models are combined by coupling several of their components. Due to the large number of available partial models describing similar phenomena, many different model combinations are possible to simulate the same aspects of a structure. The challenging task of an engineer is to select a model combination that ensures a sufficient, reliable prognosis. In order to achieve this reliable prognosis of the overall structural behavior, a high individual quality of the partial models and an adequate coupling of the partial models is required. Several methodologies have been proposed to evaluate the quality of partial models for their intended application, but a detailed study of the coupling quality is still lacking. This paper proposes a new approach to assess the coupling quality of partial models in a quantitative manner. The approach is based on the consistency of the coupled data and applies for uni- and bidirectional coupled partial models. Furthermore, the influence of the coupling quality on the output quantities of the partial models is considered. The functionality of the algorithm and the effect of the coupling quality are demonstrated using an example of coupled partial models in structural engineering.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{KulchytskyyHorokhovGubanovetal.,
  author    = {Kulchytskyy, Artem and Horokhov, Yevgen and Gubanov, Vadim and Golikov, Alexandr},
  title     = {THE INFLUENCE OF THE LOCAL CONCAVITY ON THE FUNCTIONING OF BEARING SHELL OF HIGH-RISE CONSTRUCTION},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2770},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27701},
  pages     = {10},
  abstract  = {Areas with various defects and damages, which reduce carrying capacity, were examined in a study of metal chimneys. In this work, the influence of the local dimples on the function of metal chimneys was considered. Modeling tasks were completed in the software packages LIRA and ANSYS. Parameters were identified, which characterize the local dimples, and a numerical study of the influence of local dimples on the stress-strain state of shells of metal chimneys was conducted. A distribution field of circular and meridional tension was analyzed in a researched area. Zones of influence of dimples on the bearing cover of metal chimneys were investigated. The bearing capacities of high-rise structures with various dimple geometries and various cover parameters were determined with respect to specified areas of the trunk. Dependent relationships are represented graphically for the decrease in bearing capacity of a cover with respect to dimples. Diameter and thickness of covers of metal chimneys were constructed according to the resulting data.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Wudtke,
  author    = {Wudtke, Idna},
  title     = {CONSTITUTIVE MODELING OF CRYSTALLINE MATERIALS WITH TEXTURE CHARACTERISTICS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2791},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27910},
  pages     = {9},
  abstract  = {The analysis of the response of complex structural systems requires the description of the material constitutive relations by means of an appropriate material model. The level of abstraction of such model may strongly affect the quality of the prognosis of the whole structure. In context to this fact, it is necessary to describe the material in a convenient sense as exact but as simple as possible. All material phenomena of crystalline materials e.g. steel, affecting the behavior of the structure, rely on physical effects which are interacting over spatial scales from subatomic to macroscopic range. Nevertheless, if the material is microscopically heterogenic, it might be appropriate to use phenomenological models for the purpose of civil engineering. Although constantly applied, these models are insufficient for steel materials with microscopic characteristics such as texture, typically occurring in hot rolled steel members or heat affected zones of welded joints. Hence, texture is manifested in crystalline materials as a regular crystallographic structure and crystallite orientation, influencing macroscopic material properties. The analysis of structural response of material with texture (e.g. rolled steel or heat affected zone of a welded joint) obliges the extension of the phenomenological material description of macroscopic scale by means of microscopic information. This paper introduces an enrichment approach for material models based on a hierarchical multiscale methodology. This has been done by describing the grain texture on a mesoscopic scale and coupling it with macroscopic constitutive relations by means of homogenization. Due to a variety of available homogenization methods, the question of an assessment of coupling quality arises. The applicability of the method and the effect of the coupling method on the reliability of the response are presented on an example.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@phdthesis{Karaki,
  author    = {Karaki, Ghada},
  title     = {Assessment of coupled models of bridges considering time-dependent vehicular loading},
  doi       = {10.25643/bauhaus-universitaet.1589},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120402-15894},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {184},
  abstract  = {Bridge vibration due to traffic loading has been a subject of extensive research in the last decades. The focus of such research has been to develop solution algorithms and investigate responses or behaviors of interest. However, proving the quality and reliability of the model output in structural engineering has become a topic of increasing importance. Therefore, this study is an attempt to extend concepts of uncertainty and sensitivity analyses to assess the dynamic response of a coupled model in bridge engineering considering time-dependent vehicular loading. A setting for the sensitivity analysis is proposed, which enables performing the sensitivity analysis considering random stochastic processes. The classical and proposed sensitivity settings are used to identify the relevant input parameters and models that have the most influence on the variance of the dynamic response. The sensitivity analysis exercises the model itself and extracts results without the need for measurements or reference solutions; however, it does not offer a means of ranking the coupled models studied. Therefore, concepts of total uncertainty are employed to rank the coupled models studied according to their fitness in describing the dynamic problem. The proposed procedures are applied in two examples to assess the output of coupled subsystems and coupled partial models in bridge engineering considering the passage of a heavy vehicle at various speeds.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@article{AtaollahiOshkourTalebiSeyedShirazietal.,
  author    = {Ataollahi Oshkour, Azim and Talebi, Hossein and Seyed Shirazi, Seyed Farid and Bayat, Mehdi and Yau, Yat Huang and Tarlochan, Faris and Abu Osman, Noor Azuan},
  title     = {Comparison of various functionally graded femoral prostheses by finite element analysis},
  series = {Scientific World Journal},
  journal   = {Scientific World Journal},
  doi       = {10.1155/2014/807621},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170413-31194},
  abstract  = {This study is focused on finite element analysis of a model comprising femur into which a femoral component of a total hip replacement was implanted. The considered prosthesis is fabricated from a functionally graded material (FGM) comprising a layer of a titanium alloy bonded to a layer of hydroxyapatite. The elastic modulus of the FGM was adjusted in the radial, longitudinal, and longitudinal-radial directions by altering the volume fraction gradient exponent. Four cases were studied, involving two different methods of anchoring the prosthesis to the spongy bone and two cases of applied loading. The results revealed that the FG prostheses provoked more SED to the bone. The FG prostheses carried less stress, while more stress was induced to the bone and cement. Meanwhile, less shear interface stress was stimulated to the prosthesis-bone interface in the noncemented FG prostheses. The cement-bone interface carried more stress compared to the prosthesis-cement interface. Stair climbing induced more harmful effects to the implanted femur components compared to the normal walking by causing more stress. Therefore, stress shielding, developed stresses, and interface stresses in the THR components could be adjusted through the controlling stiffness of the FG prosthesis by managing volume fraction gradient exponent.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@inproceedings{WudtkeWerner,
  author    = {Wudtke, Idna and Werner, Frank},
  title     = {MODELLING OF MATERIAL PHENOMENA OF STEEL IN CONSTITUTIVE RELATIONS IN CONTEXT OF WELDING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2903},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-29032},
  pages     = {16},
  abstract  = {The application of partly decoupled approach by means of continuum mechanics facilitates the calculation of structural responses due to welding. The numerical results demonstrate the ability of a qualitative prediction of welded connections. As it is intended to integrate the local effects of a joint in structural analysis of steel constructions, it is necessary to meet higher approaches towards quality. The wide array of material parameters are presented, which are affecting the thermal, metallurgical and mechanical behavior, and which have to be identified. For that purpose further investigations are necessary to analyze the sensitivity of the models towards different material properties. The experimental determination of every material parameter is not possible due to the extraordinary laborious efforts needed. Besides that, experimentally identified parameters can be applied only for the tested steel quality for measured temperature-time regimes. For that reason alternative approaches for identification of material parameters, such as optimization strategies, have to be applied. After a definition of material parameters a quantitative prediction of welded connections will also be possible. Numerical results show the effect of phase transformation, activated by welding process, on residual stress state. As these phenomena occur in local areas in the range of crystal and grain sizes, the description of microscopic phenomena and their propagation on a macroscopic level due to approaches of homogenization might be expedient. Nevertheless, one should bear in mind, the increasing number of material parameters as well as the complexity of their experimental determination. Thus the microscopic approach should always be investigated under the scope of ability and efficiency of a required prediction. Under certain circumstances a step backwards, adopting a phenomenological approach, also can be beneficial.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Nikulla,
  author    = {Nikulla, Susanne},
  title     = {INFLUENCE OF THE ABSTRACTION LEVEL IN KINEMATICAL MODELS OF FINITE ELEMENT FORMULATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2878},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28780},
  pages     = {9},
  abstract  = {Nonlinear analyses are characterised by approximations of the fundamental equations in different quality. Starting with a general description of nonlinear finite element formulation the fundamental equations are derived for plane truss elements. Special emphasis is placed on the determination of internal and external system energy as well as influence of different quality approaches for the displacement-strain relationship on solution quality. To simplify the solution procedure the nonlinear function describing the kinematics is expanded into a Taylor series and truncated after the n-th series term. The different kinematics influence speed of convergence as well as exactness of solution. On a simple truss structure this influence is shown. To assess the quality of different formulations concerning the nonlinear kinematic equation three approaches are discussed. First the overall internal and external energy is compared for different kinematical models. In a second step the energy content related to single terms describing displacement-strain relationship is investigated and used for quality control following two different paths. Based on single ε-terms an adaptive scheme is used to change the kinematical model depending on increasing nonlinearity of the structure. The solution quality has turned out satisfactory compared to the exact result. More detailed investigations are necessary to find criteria for the threshold values for the iterative process as well as for decision on number and step size of incremental load steps.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Stein,
  author    = {Stein, Peter},
  title     = {NURBS-BASED ELEMENTS AS A BASIS FOR INTEGRATING ENGINEERING APPLICATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2894},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28944},
  pages     = {11},
  abstract  = {Building information modeling offers a huge potential for increasing the productivity and quality of construction planning processes. Despite its promising concept, this approach has not found widespread use. One of the reasons is the insufficient coupling of the structural models with the general building model. Instead, structural engineers usually set up a structural model that is independent from the building model and consists of mechanical models of reduced dimension. An automatic model generation, which would be valuable in case of model revisions is therefore not possible. This can be overcome by a volumetric formulation of the problem. A recent approach employed the p-version of the finite element method to this problem. This method, in conjunction with a volumetric formulation is suited to simulate the structural behaviour of both „thick" solid bodies and thin-walled structures. However, there remains a notable discretization error in the numerical models. This paper therefore proposes a new approach for overcoming this situation. It sugggests the combination of the Isogeometric analysis together with the volumetric models in order to integrate the structural design into the digital, building model-centered planning process and reduce the discretization error. The concept of the isogeometric analysis consists, roughly, in the application of NURBS functions to represent the geometry and the shape functions of the elements. These functions possess some beneficial properties regarding numerical simulation. Their use, however, leads to some intricacies related to the setup of the stiffness matrix. This paper describes some of these properties.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{GoebelOsburgLahmer,
  author    = {G{\"o}bel, Luise and Osburg, Andrea and Lahmer, Tom},
  title     = {STUDY OF ANALYTICAL MODELS OF THE MECHANICAL BEHAVIOR OF POLYMER-MODIFIED CONCRETE},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2797},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27973},
  pages     = {9},
  abstract  = {Polymer modification of mortar and concrete is a widely used technique in order to improve their durability properties. Hitherto, the main application fields of such materials are repair and restoration of buildings. However, due to the constant increment of service life requirements and the cost efficiency, polymer modified concrete (PCC) is also used for construction purposes. Therefore, there is a demand for studying the mechanical properties of PCC and entitative differences compared to conventional concrete (CC). It is significant to investigate whether all the assumed hypotheses and existing analytical formulations about CC are also valid for PCC. In the present study, analytical models available in the literature are evaluated. These models are used for estimating mechanical properties of concrete. The investigated property in this study is the modulus of elasticity, which is estimated with respect to the value of compressive strength. One existing database was extended and adapted for polymer-modified concrete mixtures along with their experimentally measured mechanical properties. Based on the indexed data a comparison between model predictions and experiments was conducted by calculation of forecast errors.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@phdthesis{Nikulla,
  author    = {Nikulla, Susanne},
  title     = {Quality assessment of kinematical models by means of global and goal-oriented error estimation techniques},
  publisher = {Verlag der Bauhaus-Universit{\"a}t Weimar},
  address   = {Weimar},
  doi       = {10.25643/bauhaus-universitaet.1616},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120419-16161},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {117},
  abstract  = {Methods for model quality assessment are aiming to find the most appropriate model with respect to accuracy and computational effort for a structural system under investigation. Model error estimation techniques can be applied for this purpose when kinematical models are investigated. They are counted among the class of white box models, which means that the model hierarchy and therewith the best model is known. This thesis gives an overview of discretisation error estimators. Deduced from these, methods for model error estimation are presented. Their general goal is to make a prediction of the inaccuracies that are introduced using the simpler model without knowing the solution of a more complex model. This information can be used to steer an adaptive process. Techniques for linear and non-linear problems as well as global and goal-oriented errors are introduced. The estimation of the error in local quantities is realised by solving a dual problem, which serves as a weight for the primal error. So far, such techniques have mainly been applied in material modelling and for dimensional adaptivity. Within the scope of this thesis, available model error estimators are adapted for an application to kinematical models. Their applicability is tested regarding the question of whether a geometrical non-linear calculation is necessary or not. The analysis is limited to non-linear estimators due to the structure of the underlying differential equations. These methods often involve simplification, e.g linearisations. It is investigated to which extent such assumptions lead to meaningful results, when applied to kinematical models.},
  subject      = {Model quality, Model error estimation, Kinematical model, Geometric non-linearity, Finite Element method},
  language  = {en}
}
@inproceedings{Reuter,
  author    = {Reuter, Markus},
  title     = {EVALUATION OF THE ANALYSIS METHOD FOR THE DESIGN OF FRAME STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2882},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28823},
  pages     = {14},
  abstract  = {By the use of numerical methods and the rapid development of computer technology in the recent years, a large variety, complexity, refinement and capability of partial models have been achieved. This can be noticed in the evaluation of the reliability of structures, e.g. the increased use of spatial structural systems. For the different fields of civil engineering, well developed partial models already exist. Because these partial models are most often used separately, the general view is not entirely illustrated. Until now, there has been no common methodology for evaluating the efficiency of models; the trust in the prediction of a special engineering model has generally relied on the engineer's experience. In this paper the basics of evaluation of simple models and coupled partial models of frame structures will be discussed using sustainable numerical methods. Furthermore, quality classes (levels) of design tasks will be defined based on their practical relevance. In addition, analysis methods will be systemized. After analysis of different published assessment methods, it may be noted, that the Efficiency Indicator Method (EWM) is most suitable for the observed evaluation problem. Therefore, the EWM was modified to the Model Efficiency Analysis (MEA) for the purpose of a holistic evaluation. The criteria are characterized by two groups, benefit and expenditure, and it is possible by calculating the quotient (benefit/expenditure) to make a statement about the efficiency of the observed models. Presently, the expenditure value is not a subject of investigation, and so the model efficiency is calculated only by the benefit value. This paper also contains the associated criteria catalog, different normalization methods, as well as weighting possibilities.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{AbbasMorgenthal,
  author    = {Abbas, Tajammal and Morgenthal, Guido},
  title     = {Model combinations for assessing the flutter stability of suspension bridges},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2757},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170306-27574},
  pages     = {11},
  abstract  = {Long-span cable supported bridges are prone to aerodynamic instabilities caused by wind and this phenomenon is usually a major design criterion. If the wind speed exceeds the critical flutter speed of the bridge, this constitutes an Ultimate Limit State. The prediction of the flutter boundary therefore requires accurate and robust models. This paper aims at studying various combinations of models to predict the flutter phenomenon. Since flutter is a coupling of aerodynamic forcing with a structural dynamics problem, different types and classes of models can be combined to study the interaction. Here, both numerical approaches and analytical models are utilised and coupled in different ways to assess the prediction quality of the hybrid model. Models for aerodynamic forces employed are the analytical Theodorsen expressions for the motion-enduced aerodynamic forces of a flat plate and Scanlan derivatives as a Meta model. Further, Computational Fluid Dynamics (CFD) simulations using the Vortex Particle Method (VPM) were used to cover numerical models. The structural representations were dimensionally reduced to two degree of freedom section models calibrated from global models as well as a fully three-dimensional Finite Element (FE) model. A two degree of freedom system was analysed analytically as well as numerically. Generally, all models were able to predict the flutter phenomenon and relatively close agreement was found for the particular bridge. In conclusion, the model choice for a given practical analysis scenario will be discussed in the context of the analysis findings.},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{DeAguinaga,
  author    = {De Aguinaga, Jos{\´e} Guillermo},
  title     = {INFLUENCE OF DIFFERENT DATA TYPES FOR THE ESTIMATION OF HYDROMECHANICAL PARAMETERS FOR A WATER RETAINING DAM USING SYNTHETIC DATA},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2760},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170306-27607},
  pages     = {12},
  abstract  = {The present research analyses the error on prediction obtained under different data availability scenarios to determine which measurements contribute to an improvement of model prognosis and which not. A fully coupled 2D hydromechanical model of a water retaining dam is taken as an example. Here, the mean effective stress in the porous skeleton is reduced due to an increase in pore water pressure under drawdown conditions. Relevant model parameters are ranked by scaled sensitivities, Particle Swarm Optimization is applied to determine the optimal parameter values and model validation is performed to determine the magnitude of error forecast. We compare the predictions of the optimized models with results from a forward run of the reference model to obtain actual prediction errors. The analyses presented here were performed to 31 data sets of 100 observations of varying data types. Calibrating with multiple information types instead of only one sort, brings better calibration results and improvement in model prognosis. However, when using several types of information the number of observations have to be increased to be able to cover a representative part of the model domain; otherwise a compromise between data availability and domain coverage prove best. Which type of information for calibration contributes to the best prognoses, could not be determined in advance. For the error in model prognosis does not depends on the error in calibration, but on the parameter error, which unfortunately can not be determined in reality since we do not know its real value. Excellent calibration fits with parameters' values near the limits of reasonable physical values, provided the highest prognosis errors. While models which included excess pore pressure values for calibration provided the best prognosis, independent of the calibration fit.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{JungMorgenthal,
  author    = {Jung, Bastian and Morgenthal, Guido},
  title     = {ASSESSMENT OF INTEGRAL BRIDGES USING QUANTITATIVE MODEL EVALUATION},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2766},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27662},
  pages     = {10},
  abstract  = {Numerical simulations in the general field of civil engineering are common for the design process of structures and/or the assessment of existing buildings. The behaviour of these structures is analytically unknown and is approximated with numerical simulation methods like the Finite Element Method (FEM). Therefore the real structure is transferred into a global model (GM, e.g. concrete bridge) with a wide range of sub models (partial models PM, e.g. material modelling, creep). These partial models are coupled together to predict the behaviour of the observed structure (GM) under different conditions. The engineer needs to decide which models are suitable for computing realistically and efficiently the physical processes determining the structural behaviour. Theoretical knowledge along with the experience from prior design processes will influence this model selection decision. It is thus often a qualitative selection of different models. The goal of this paper is to present a quantitative evaluation of the global model quality according to the simulation of a bridge subject to direct loading (dead load, traffic) and indirect loading (temperature), which induce restraint effects. The model quality can be separately investigated for each partial model and also for the coupled partial models in a global structural model. Probabilistic simulations are necessary for the evaluation of these model qualities by using Uncertainty and Sensitivity Analysis. The method is applied to the simulation of a semi-integral concrete bridge with a monolithic connection between the superstructure and the piers, and elastomeric bearings at the abutments. The results show that the evaluation of global model quality is strongly dependent on the sensitivity of the considered partial models and their related quantitative prediction quality. This method is not only a relative comparison between different models, but also a quantitative representation of model quality using probabilistic simulation methods, which can support the process of model selection for numerical simulations in research and practice.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{KarakiFreundtVogt,
  author    = {Karaki, Ghada and Freundt, Ursula and Vogt, Ralf},
  title     = {MODELING OF BRIDGE BEARING UNDER TRANSIENT LOADING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2854},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28544},
  pages     = {11},
  abstract  = {The evident advances of the computational power of the digital computers enable the modeling of the total system of structures. Such modeling demands compatible representations of the couplings of different structural subsystems. Therefore, models of dynamic interaction between the vehicle and the bridge and models of a bridge bearing, a coupling element between the bridge's superstructure and substructure, are of interest and discussed within this paper. The vehicle-bridge interaction may be described as a function connecting two sets of behavior. In this case, the coupling is embodied by mutual parameters that affect both systems, such as the frequency content of the bridge and the vehicle. Whereas the bridge bearings are elements used specifically to couple, in such elements the deformation and the transferred loads are used in characterizing the coupling The nature of these couplings and their influence on the bridge response is different. However, the need to assess the amount of dynamic response transferred by or within these couplings is a common argument.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{GhorashiRabczukRodenasGarciaetal.,
  author    = {Ghorashi, Seyed Shahram and Rabczuk, Timon and R{\´o}denas Garc{\´i}a, Juan Jos{\´e} and Lahmer, Tom},
  title     = {T-SPLINE BASED XIGA FOR ADAPTIVE MODELING OF CRACKED BODIES},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2763},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27637},
  pages     = {13},
  abstract  = {Safety operation of important civil structures such as bridges can be estimated by using fracture analysis. Since the analytical methods are not capable of solving many complicated engineering problems, numerical methods have been increasingly adopted. In this paper, a part of isotropic material which contains a crack is considered as a partial model and the proposed model quality is evaluated. EXtended IsoGeometric Analysis (XIGA) is a new developed numerical approach [1, 2] which benefits from advantages of its origins: eXtended Finite Element Method (XFEM) and IsoGeometric Analysis (IGA). It is capable of simulating crack propagation problems with no remeshing necessity and capturing singular field at the crack tip by using the crack tip enrichment functions. Also, exact representation of geometry is possible using only few elements. XIGA has also been successfully applied for fracture analysis of cracked orthotropic bodies [3] and for simulation of curved cracks [4]. XIGA applies NURBS functions for both geometry description and solution field approximation. The drawback of NURBS functions is that local refinement cannot be defined regarding that it is based on tensorproduct constructs unless multiple patches are used which has also some limitations. In this contribution, the XIGA is further developed to make the local refinement feasible by using Tspline basis functions. Adopting a recovery based error estimator in the proposed approach for evaluation of the model quality and performing the adaptive processes is in progress. Finally, some numerical examples with available analytical solutions are investigated by the developed scheme.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Nasser,
  author    = {Nasser, Mourad},
  title     = {SEISMIC RESPONSE OF R/C FRAMES CONSIDERING DYNAMIC SOIL-STRUCTURE INTERACTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2875},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28759},
  pages     = {17},
  abstract  = {In spite of the extensive research in dynamic soil-structure interaction (SSI), there still exist miscon-ceptions concerning the role of SSI in the seismic performance of structures, especially the ones founded on soft soil. This is due to the fact that current analytical SSI models that are used to evaluate the influence of soil on the overall structural behavior are approximate models and may involve creeds and practices that are not always precise. This is especially true in the codified approaches which in-clude substantial approximations to provide simple frameworks for the design. As the direct numerical analysis requires a high computational effort, performing an analysis considering SSI is computationally uneconomical for regular design applications. This paper outlines the set up some milestones for evaluating SSI models. This will be achieved by investigating the different assumptions and involved factors, as well as varying the configurations of R/C moment-resisting frame structures supported by single footings which are subject to seismic excita-tions. It is noted that the scope of this paper is to highlight, rather than fully resolve, the above subject. A rough draft of the proposed approach is presented in this paper, whereas a thorough illustration will be carried out throughout the presentation in the course of the conference.},
  subject      = {Angewandte Informatik},
  language  = {en}
}