@article{PatzeltErfurtLudwig,
  author    = {Patzelt, Max and Erfurt, Doreen and Ludwig, Horst-Michael},
  title     = {Quantification of cracks in concrete thin sections considering current methods of image analysis},
  series = {Journal of Microscopy},
  volume    = {2022},
  journal   = {Journal of Microscopy},
  number    = {Volume 286, Issue 2},
  doi       = {10.1111/jmi.13091},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220811-46754},
  pages     = {154 -- 159},
  abstract  = {Image analysis is used in this work to quantify cracks in concrete thin sections via modern image processing. Thin sections were impregnated with a yellow epoxy resin, to increase the contrast between voids and other phases of the concrete. By the means of different steps of pre-processing, machine learning and python scripts, cracks can be quantified in an area of up to 40 cm2. As a result, the crack area, lengths and widths were estimated automatically within a single workflow. Crack patterns caused by freeze-thaw damages were investigated. To compare the inner degradation of the investigated thin sections, the crack density was used. Cracks in the thin sections were measured manually in two different ways for validation of the automatic determined results. On the one hand, the presented work shows that the width of cracks can be determined pixelwise, thus providing the plot of a width distribution. On the other hand, the automatically measured crack length differs in comparison to the manually measured ones.},
  subject      = {Beton},
  language  = {en}
}
@article{PervyshinYakovlevGordinaetal.,
  author    = {Pervyshin, G.N. and Yakovlev, G.I. and Gordina, A.F. and Keriene, J. and Polyanskikh, I.S. and Fischer, Hans-Bertram and Rachimova, N.R. and Buryanov, A.F.},
  title     = {Water-resistant Gypsum Compositions with Man-made Modifiers},
  series = {Procedia Engineering},
  journal   = {Procedia Engineering},
  doi       = {10.1016/j.proeng.2017.02.087},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31580},
  pages     = {867 -- 874},
  abstract  = {The work has studied the structure and properties of gypsum compositions modified with the manmade modifier based on metallurgical dust and multi-walled carbon nanotubes. The results show that changing the structure of solid gypsum leads to the increase in bending and compressive strength by 70,5\% and 138\% correspondingly, the water resistance increasing and the softening factor reaching 0,85. Modifying gypsum composition with complex additive leads to the formation of amorphous structures based on calcium hydrosilicates on the surface of primary gypsum crystallohydrates that bond gypsum crystals and reduce the access of water.},
  subject      = {Gips},
  language  = {en}
}