@inproceedings{Vasileva,
  author    = {Vasileva, Iuliia},
  title     = {THE PROBLEM OF PARTIAL REINFORCING AN INTERFACE CRACK EDGE BY A RIGID PATCH PLATE UNDER IN-PLANE AND ANTIPLANE LOADS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2824},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28242},
  pages     = {5},
  abstract  = {The stress state of a piecewise-homogeneous elastic body, which has a semi-infinite crack along the interface, under in-plane and antiplane loads is considered. One of the crack edges is reinforced by a rigid patch plate on a finite interval adjacent to the crack tip. The crack edges are loaded with specified stresses. The body is stretched at infinity by specified stresses. External forces with a given principal vector and moment act on the patch plate. The problem reduces to a Riemann-Hilbert boundary-value matrix problem with a piecewise-constant coefficient for two complex potentials in the plane case and for one in the antiplane case. The complex potentials are found explicitly using a Gaussian hypergeometric function. The stress state of the body close to the ends of the patch plate, one of which is also simultaneously the crack tip, is investigated. Stress intensity factors near the singular points are determined.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Nasser,
  author    = {Nasser, Mourad},
  title     = {SEISMIC RESPONSE OF R/C FRAMES CONSIDERING DYNAMIC SOIL-STRUCTURE INTERACTION},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2875},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28759},
  pages     = {17},
  abstract  = {In spite of the extensive research in dynamic soil-structure interaction (SSI), there still exist miscon-ceptions concerning the role of SSI in the seismic performance of structures, especially the ones founded on soft soil. This is due to the fact that current analytical SSI models that are used to evaluate the influence of soil on the overall structural behavior are approximate models and may involve creeds and practices that are not always precise. This is especially true in the codified approaches which in-clude substantial approximations to provide simple frameworks for the design. As the direct numerical analysis requires a high computational effort, performing an analysis considering SSI is computationally uneconomical for regular design applications. This paper outlines the set up some milestones for evaluating SSI models. This will be achieved by investigating the different assumptions and involved factors, as well as varying the configurations of R/C moment-resisting frame structures supported by single footings which are subject to seismic excita-tions. It is noted that the scope of this paper is to highlight, rather than fully resolve, the above subject. A rough draft of the proposed approach is presented in this paper, whereas a thorough illustration will be carried out throughout the presentation in the course of the conference.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{RogozaUbysz,
  author    = {Rogoza, Agnieszka and Ubysz, Andrzej},
  title     = {NUMERICAL ANALYSIS OF THE CRACKED REINFORCED CONCRETE BEAMS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2883},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28835},
  pages     = {8},
  abstract  = {We present the way of calculation of displacement in the bent reinforced concrete bar elements where rearrangement of internal forces and plastic hinge occurred. The described solution is based on prof. Borcz's mathematical model. It directly takes into consideration the effects connected with the occurrence of plastic hinge, such as for example a crack, by means of a differential equation of axis of the bent reinforced concrete beam. The EN Eurocode 2 makes it possible to consider the influence of plastic hinge on the values of the reinforced concrete structures. This influence can also be assumed using other analytical methods. However, the results obtained by the application of Eurocode 2 are higher from those received in testing. Just comparably big error level occurs when calculations are made by means of Borcz's method, but in the latter case, the results depend on the assumptions made beforehand. This method makes it possible to apply the experimental results using parameters r1 i r0. When the experimental results are taken into account, one could observe the compatibility between the calculations and actual deflections of the structure.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{SampaioFerreiraRosario,
  author    = {Sampaio, Alcinia Zita and Ferreira, Miguel M. and Ros{\´a}rio, Daniel P.},
  title     = {BUILDING FACILITIES MANAGEMENT SUPPORT ON VIRTUAL INTERACTIVE MODEL: THE LIGHTING COMPONENT},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2885},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28858},
  pages     = {12},
  abstract  = {The main aim of the research project in progress is to develop virtual models as tools to support decision-making in the planning of construction maintenance. The virtual models gives the capacity to allow them to transmit, visually and interactively, information related to the physical behaviour of materials, components of given infrastructures, defined as a function of the time variable. The interactive application allows decisions to be made on conception options in the definition of plans for maintenance, conservation or rehabilitation. The first virtual prototype that is now in progress concerns just lamps. It allows the examination of the physical model, visualizing, for each element modelled in 3D and linked to a database, the corresponding technical information concerned with the wear and tear aspects of the material, calculated for that period of time. In addition, the analysis of solutions for repair work or substitution and inherent cost are predicted, the results being obtained interactively and visualized in the virtual environment itself. The aim is that the virtual model should be able to be applied directly over the 3D models of new constructions, in situations of rehabilitation. The practical usage of these models is directed, then, towards supporting decision-making in the conception phase and the planning of maintenance. In further work other components will be analysed and incorporated into the virtual system.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{SikiwatBreidtHartmann,
  author    = {Sikiwat, Tanongsak and Breidt, Michael and Hartmann, Dietrich},
  title     = {COMPUTATIONAL STEERING FOR COLLAPSE SIMULATION OF LARGE SCALE COMPLEX STRUCTURES},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2890},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28908},
  pages     = {9},
  abstract  = {In order to model and simulate collapses of large scale complex structures, a user-friendly and high performance software system is essential. Because a large number of simulation experiments have to be performed, therefore, next to an appropriate simulation model and high performance computing, efficient interactive control and visualization capabilities of model parameters and simulation results are crucial. To this respect, this contribution is concerned with advancements of the software system CADCE (Computer Aided Demolition using Controlled Explosives) that is extended under particular consideration of computational steering concepts. Thereby, focus is placed on problems and solutions for the collapse simulation of real world large scale complex structures. The simulation model applied is based on a multilevel approach embedding finite element models on a local as well as a near field length scale, and multibody models on a global scale. Within the global level simulation, relevant effects of the local and the near field scale, such as fracture and failure processes of the reinforced concrete parts, are approximated by means of tailor-made multibody subsystems. These subsystems employ force elements representing nonlinear material characteristics in terms of force/displacement relationships that, in advance, are determined by finite element analysis. In particular, enhancements concerning the efficiency of the multibody model and improvements of the user interaction are presented that are crucial for the capability of the computational steering. Some scenarios of collapse simulations of real world large scale structures demonstrate the implementation of the above mentioned approaches within the computational steering.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Knabe,
  author    = {Knabe, Tina},
  title     = {CONSTITUTIVE MODELS FOR SUBSOIL IN THE CONTEXT OF STRUCTURAL ANALYSIS IN CONSTRUCTION ENGINEERING},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2862},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28628},
  pages     = {16},
  abstract  = {Parameters of constitutive models are obtained generally comparing the results of forward numerical simulations to measurement data. Mostly the parameter values are varied by trial-and-error in order to reach an improved fit and obtain plausible results. However, the description of complex soil behavior requires advanced constitutive models where the rising complexity of these models mainly increases the number of unknown constitutive parameters. Thus an efficient identification "by hand" becomes quite difficult for most practical geotechnical problems. The main focus of this article is on finding a vector of parameters in a given search space which minimizes discrepancy between measurements and the associated numerical result. Classically, the parameter values are estimated from laboratory tests on small samples (triaxial tests or oedometer tests). For this purpose an automatic population-based approach is present to determine the material parameters for reconstituted and natural Bothkennar Clay. After the identification a statistical assessment is carried out of numerical results to evaluate different constitutive models. On the other side a geotechnical problem, stone columns under an embankment, is treated in a well instrumented field trial in Klagenfurt, Austria. For the identification purpose there are measurements from multilevel-piezometers, multilevel-extensometers and horizontal inclinometer. Based on the simulation of the stone columns in a FE-Model the identification of the constitutive parameters is similar to the experimental tests by minimizing the absolute error between measurement and numerical curves.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{MusialUbyszUlatowski,
  author    = {Musial, Michal and Ubysz, Andrzej and Ulatowski, Piotr},
  title     = {MODEL DESCRIBING STATIC AND DYNAMIC DISPLACEMENTS OF SILOS WALL DURING THE FLOW OF LOOSE MATERIAL},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2789},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27896},
  pages     = {16},
  abstract  = {Correct evaluation of wall displacements is a key matter when designing silos. This issue is important from both the standpoint of design engineer (load-bearing capacity of structures) and end-consumer (durability of structures). Commonplace methods of silo design mainly focus on satisfying limit states of load-bearing capacity. Current standards fail to specify methods of dynamic displacements analysis. Measurements of stressacting on silo walls prove that the actual stress is sum of static and dynamic stresses. Janssen came up with differential equation describing state of static equilibrium in cross-section of a silo. By solving the equation static stress of granular solid on silo walls can be determined. Equations of motion were determined from equilibrium equations of feature objects. General solution, describing dynamic stresses was presented as parametric model. This paper presents particular integrals of differential equation, which enable analysing displacements and vibrations for different rigidities of silo walls, types of granular solid and its flow rate.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{MusialKaminskiUbysz,
  author    = {Musial, Michal and Kaminski, Mieczysław and Ubysz, Andrzej},
  title     = {FREE VIBRATION FREQUENCIES OF THE CRACKED REINFORCED CONCRETE BEAMS - METHODS OF CALCULATIONS},
  editor    = {G{\"u}rlebeck, Klaus and K{\"o}nke, Carsten},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2874},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28744},
  pages     = {8},
  abstract  = {The paper presents method of calculation of natural frequencies of the cracked reinforced concrete beams including discreet model of crack. The described method is based on the stiff finite elements method. It was modified in such a way as to take into account local discontinuities (ie. cracks). In addition, some theoretical studies as well as experimental tests of concrete mechanics based on discrete crack model were taken into consideration. The calculations were performed using the author's own numerical algorithm. Moreover, other calculation methods of dynamic reinforced concrete beams presented in standards and guidelines are discussed. Calculations performed by using different methods are compared with the results obtained in experimental tests.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Karaki,
  author    = {Karaki, Ghada},
  title     = {DEPENDENCY OF THE INFLUENCE OF INPUT PARAMETERS OF BVI MODELS ON THE INITIAL EXCITATIONS AND SPEED RANGES},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2767},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27675},
  pages     = {13},
  abstract  = {Bridge vibration due to traffic loading has been subject of extensive research in the last decades. Such studies are concerned with deriving solutions for the bridge-vehicle interaction (BVI) and analyzing the dynamic responses considering randomness of the coupled model's (BVI) input parameters and randomness of road unevenness. This study goes further to examine the effects of such randomness of input parameters and processes on the variance of dynamic responses in quantitative measures. The input parameters examined in the sensitivity analysis are, stiffness and damping of vehicle's suspension system, axle spacing, and stiffness and damping of bridge. This study also examines the effects of the initial excitation of a vehicle on the influences of the considered input parameters. Variance based sensitivity analysis is often applied to deterministic models. However, the models for the dynamic problem is a stochastic one due to the simulations of the random processes. Thus, a setting using a joint meta-model; one for the mean response and other for the dispersion of the response is developed. The joint model is developed within the framework of Generalized Linear Models (GLM). An enhancement of the GLM procedure is suggested and tested; this enhancement incorporates Moving Least Squares (MLS) approximation algorithms in the fitting of the mean component of the joint model. The sensitivity analysis is then performed on the joint-model developed for the dynamic responses caused by BVI.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{MoraisGeorgiev,
  author    = {Morais, Joao and Georgiev, Svetlin},
  title     = {COMPLETE ORTHOGONAL SYSTEMS OF 3D SPHEROIDAL MONOGENICS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom and Werner, Frank},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2778},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27785},
  pages     = {14},
  abstract  = {In this paper we review two distint complete orthogonal systems of monogenic polynomials over 3D prolate spheroids. The underlying functions take on either values in the reduced and full quaternions (identified, respectively, with R3 and R4), and are generally assumed to be nullsolutions of the well known Riesz and Moisil Th{\´e}odoresco systems in R3. This will be done in the spaces of square integrable functions over R and H. The representations of these polynomials are explicitly given. Additionally, we show that these polynomial functions play an important role in defining the Szeg{\"o} kernel function over the surface of 3D spheroids. As a concrete application, we prove the explicit expression of the monogenic Szeg{\"o} kernel function over 3D prolate spheroids.},
  subject      = {Angewandte Informatik},
  language  = {en}
}