@inproceedings{AldaCremersBilek2004,
  author    = {Alda, Sascha and Cremers, Armin B. and Bilek, Jochen},
  title     = {Support of Collaborative Structural Design Processes through the Integration of Peer-to-Peer and Multiagent Architectures},
  doi       = {10.25643/bauhaus-universitaet.148},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1481},
  year      = {2004},
  abstract  = {Structural engineering projects are increasingly organized in networked cooperations due to a permanently enlarged competition pressure and a high degree of complexity while performing the concurrent design activities. Software that intends to support such collaborative structural design processes implicates enormous requirements. In the course of our common research work, we analyzed the pros and cons of the application of both the peer-to-peer (University of Bonn) and multiagent architecture style (University of Bochum) within the field of collaborative structural design. In this paper, we join the benefits of both architecture styles in an integrated conceptual approach. We demonstrate the surplus value of the integrated multiagent-peer-to-peer approach by means of an example scenario in which several structural engineers are co-operatively designing the basic structural elements of an arched bridge, applying heterogeneous CAD systems.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{EslimyIsfahanyPegels2004,
  author    = {Eslimy-Isfahany, S. H. R. and Pegels, Georg},
  title     = {Net-distributed Co-operation Including Developing Countries, Practical Case Study - Iran},
  doi       = {10.25643/bauhaus-universitaet.142},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1421},
  year      = {2004},
  abstract  = {The scientific transfer of key technology features to developing countries, together with adequate competence, localisation and adaptation, is the primary purpose of the proposed investigation. It is evident that introducing high-level CAD design and detailing will improve the planning process in developing countries. Successful utilization of applied information technology for the planning process, however, depends on the user-interface of individual software. Therefore, to open the great opportunity embedded in CAD software for clients globally, the language and character-set barrier of traditional user-interfaces must be overcome. A proposal for a research program is given here to address such issue in favour of global civil engineering.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{PetersenSeewald2004,
  author    = {Petersen, Michael and Seewald, Gerrit},
  title     = {Establishing of fundamentals in building projects using web services},
  doi       = {10.25643/bauhaus-universitaet.127},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1273},
  year      = {2004},
  abstract  = {During the establishing of fundamentals in a building project a huge amount of influence factors and boundary conditions have to be investigated in order to provide the prerequisites for further planning processes. These investigative tasks are often related with a great effort concerning time and money, because there are no standardized workflows and interfaces which provide an efficient access to the necessary information related to a specific construction site. Within the fundamental investigation human and natural circumstances have to be taken into account. Thus, in this project two examples have been chosen in order to demonstrate the holistic approach for an integration and provision of georeferenced information. The developed internet-site http://www.grundlagenermittlung.de has been designed to support architects and civil engineers in early planning phases of a building project efficiently. It offers web-based services based on dynamic interfaces for a flexible search and collection of information concerning the building site. Therefore, a central Metadatabase-Server for Description, Discovery and Integration has been established which enables a registration of georeferenced services and the redirection of incoming requests to other, distributed data pools. Using this Yellow-Page concept in combination with the underlying meta-data based on the ISO 19115 standard an efficient investigation of geographical and environmental information becomes possible.},
  subject      = {Bauwerk},
  language  = {en}
}
@inproceedings{MundaniBungartz2004,
  author    = {Mundani, Ralf-Peter and Bungartz, Hans-Joachim},
  title     = {Octrees for Cooperative Work in a Network-Based Environment},
  doi       = {10.25643/bauhaus-universitaet.146},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1460},
  year      = {2004},
  abstract  = {Assuring global consistency in a cooperative working environment is the main focus of many nowaday research projects in the field of civil engineering and others. In this paper, a new approach based on octrees will be discussed. It will be shown that by the usage of octrees not only the management and control of processes in a network-based working environment can be optimised but also an efficient integration platform for processes from various disciplines - such as architecture and civil engineering - can be provided. By means of an octree-based collision detection resp. consistency assurance a client-server-architecture will be described as well as sophisticated information services for a further support of cooperative work.},
  subject      = {Ingenieurbau},
  language  = {en}
}
@inproceedings{LiuSoibelmanTrupp2004,
  author    = {Liu, Liang and Soibelman, Lucio and Trupp, Torsten},
  title     = {Novel Technologies for Construction Field Data Collection},
  doi       = {10.25643/bauhaus-universitaet.112},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1120},
  year      = {2004},
  abstract  = {A vast growth of advanced information technology systems and tools nowadays is opening new ways to collect accurate as-built data. Since the turn of the millennium, new technology developments enable for the first time to gather accurate as-built information. Accurate as-built data will be of great usage to construction management as well as to designers and engineers. Given that most of the planned data are already digitally available, as-built data remains on paper forms. Information technology developments are opening new ways to digitize construction field data in order to develop intelligent tools for construction management allowing design engineers to update as-planned data. 3D Laser scanning, digital close-range photogrammetry and mobile computing are among the promising data collection technologies, which are auspicious to create new opportunities to develop advanced construction management and engineering tools. Primarily, accurate collected as-built data will be highly beneficial for the process of updating as-planned data.},
  subject      = {Mobile Computing},
  language  = {en}
}
@article{PickHeimsundMilbradt2004,
  author    = {Pick, Tobias and Heimsund, Bjoern-Ove and Milbradt, Peter},
  title     = {Development and Analysis of Sparse Matrix Concepts for Finite Element Approximation on general Cells},
  doi       = {10.25643/bauhaus-universitaet.250},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2500},
  year      = {2004},
  abstract  = {In engineering and computing, the finite element approximation is one of the most well-known computational solution techniques. It is a great tool to find solutions for mechanic, fluid mechanic and ecological problems. Whoever works with the finite element method will need to solve a large system of linear equations. There are different ways to find a solution. One way is to use a matrix decomposition technique such as LU or QR. The other possibility is to use an iterative solution algorithm like Conjugate Gradients, Gauß-Seidel, Multigrid Methods, etc. This paper will focus on iterative solvers and the needed storage techniques...},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@inproceedings{WellmannJelicBaitschHartmann2004,
  author    = {Wellmann Jelic, Andres and Baitsch, Matthias and Hartmann, Dietrich},
  title     = {Distributed computing of failure probabilities for structures in civil engineering},
  doi       = {10.25643/bauhaus-universitaet.103},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1030},
  year      = {2004},
  abstract  = {In this contribution the software design and implementation of an analysis server for the computation of failure probabilities in structural engineering is presented. The structures considered are described in terms of an equivalent Finite Element model, the stochastic properties, like e.g. the scatter of the material behavior or the incoming load, are represented using suitable random variables. Within the software framework, a Client-Server-Architecture has been implemented, employing the middleware CORBA for the communication between the distributed modules. The analysis server offers the possibility to compute failure probabilities for stochastically defined structures. Therefore, several different approximation (FORM, SORM) and simulation methods (Monte Carlo Simulation and Importance Sampling) have been implemented. This paper closes in showing several examples computed on the analysis server.},
  subject      = {Konzipieren <Technik>},
  language  = {en}
}
@inproceedings{BaitschHartmann2004,
  author    = {Baitsch, Matthias and Hartmann, Dietrich},
  title     = {Object Oriented Finite Element Analysis for Structural Optimization using p-Elements},
  doi       = {10.25643/bauhaus-universitaet.108},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1089},
  year      = {2004},
  abstract  = {The optimization of continuous structures requires careful attention to discretization errors. Compared to ordinary low order formulation (h-elements) in conjunction with an adaptive mesh refinement in each optimization step, the use of high order finite elements (so called p-elements) has several advantages. However, compared to the h-method a higher order finite element analysis program poses higher demands from a software engineering point of view. In this article the basics of an object oriented higher order finite element system especially tailored to the use in structural optimization is presented. Besides the design of the system, aspects related to the employed implementation language Java are discussed.},
  subject      = {Konzipieren <Technik>},
  language  = {en}
}
@inproceedings{BedardMoraRivard2004,
  author    = {B{\´e}dard, Claude and Mora, Rodrigo and Rivard, Hugues},
  title     = {A Framework for Computer-Aided Conceptual Design of Building Structures},
  doi       = {10.25643/bauhaus-universitaet.101},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1018},
  year      = {2004},
  abstract  = {This paper describes a framework for computer-aided conceptual design of building structures that results from building architectural considerations. The central task that is carried out during conceptual design is the synthesis of the structural system. This paper proposes a methodology for the synthesis of structural solutions. Given the nature of architectural constraints, user-model interactivity is devised as the most suitable computer methodology for driving the structural synthesis process. Taking advantage of the hierarchical organization of the structural system, this research proposes a top-down approach for structural synthesis. Through hierarchical refinement, the approach lends itself to the synthesis of global and local structural solutions. The components required for implementing the proposed methodology are briefly described. The main components have been incorporated in a proof-of-concept prototype that is being tested and validated with actual buildings.},
  subject      = {Konzipieren <Technik>},
  language  = {en}
}
@article{ZavadskasKaklauskasViteikiene2004,
  author    = {Zavadskas, Edmundas Kazimieras and Kaklauskas, Arturas and Viteikiene, Milda},
  title     = {Database of Best Practices and Decision Support Web-based System for Construction Innovation},
  doi       = {10.25643/bauhaus-universitaet.217},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2173},
  year      = {2004},
  abstract  = {Many construction and facilities management Web sites can be found on the Internet. The interested parties on construction and facilities management Web sites can find databases of best practices, calculators, analyzers, software, expert and decision support systems, neural networks, etc. Technological innovation mainly through changes in the availability of information and communication technology inclusive databases of best practices, calculators, analyzers, software, neural networks, decision support and expert systems that have been provided by a variety of new services developed by the construction and facilities management sectors. Most of all calculators, analyzers, software, decision support and expert systems, neural networks and on-line systems seek to find out how to make the most economic decisions and most of all these decisions are intended only for economic objectives. Alternatives under evaluation have to be evaluated not only from the economic position, but take into consideration qualitative, technical, technological and other characteristics as well. Based on the analysis of the existing calculators, analyzers, information, expert and decision support systems, neural networks and in order to determine most efficient versions of best practices a Decision Support Web-Based System for Construction Innovation (IDSS) was developed by Vilnius Gediminas Technical University.},
  subject      = {Mehragentensystem},
  language  = {en}
}
@article{GalffyWellmannJelicHartmann2004,
  author    = {Galffy, Mozes and Wellmann Jelic, Andres and Hartmann, Dietrich},
  title     = {Lifetime-oriented modelling of vortex-induced across-wind vibrations on bridge tie rods},
  doi       = {10.25643/bauhaus-universitaet.253},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2536},
  year      = {2004},
  abstract  = {The influence of vortex-induces vibrations on vertical tie rods has been proved as a determinant load factor in the lifetime-oriented dimensioning of arched steel bridges. Particularly, the welded connection plates between the suspenders and the arches often exhibit cracks induced primarily rods. In this context, the synchronization of the vortex-shedding to the rod motion in a critical wind velocity range, the so-called lock-in effect, is of essential interest.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{VogelBreitMaerki2004,
  author    = {Vogel, Manfred and Breit, Manfred and M{\"a}rki, Fabian},
  title     = {Optimization of 4D Process Planning using Genetic Algorithms},
  doi       = {10.25643/bauhaus-universitaet.236},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2360},
  year      = {2004},
  abstract  = {The presented work focuses on the presentation of a discrete event simulator which can be used for automated sequencing and optimization of building processes. The sequencing is based on the commonly used component-activity-resource relations taking structural and process constraints into account. For the optimization a genetic algorithm approach was developed, implemented and successfully applied to several real life steel constructions. In this contribution we discuss the application of the discrete event simulator including its optimization capabilities on a 4D process model of a steel structure of an automobile recycling facility.},
  subject      = {Produktmodell},
  language  = {en}
}
@inproceedings{Huhnt2004,
  author    = {Huhnt, Wolfgang},
  title     = {Progress Measurement in Planning Processes on the Base of Process Models},
  doi       = {10.25643/bauhaus-universitaet.166},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1664},
  year      = {2004},
  abstract  = {This paper presents a specific modeling technique that is focused on preparing planning processes in civil engineering. Planning processes in civil engineering are characterized by some peculiarities so that the sequence of planning tasks needs to be determined for each planning project. Neither the use of optimized partial processes nor the use of lower detailed and optimized processes guarantee an optimal overall planning process. The modeling technique considers these peculiarities. In a first step, it is focused on the logic of the planning process. Algorithms based on the graph theory determine that logic. This approach ensures consistency and logical correctness of the description of a planning process at the early beginning in its preparation phase. Sets of data - the products of engineers like technical drawings, technical models, reports, or specifications - form the core of the presented modeling technique. The production of these sets of data requires time and money. This is expressed by a specific weighting of each set of data in the presented modeling technique. The introduction of these weights allows an efficient progress measurement and controlling of a planning project. For this purpose, a link between the modeling technique used in the preparation phase and the execution phase is necessary so that target and actual values are available for controlling purposes. The present paper covers the description of this link. An example is given to illustrate the use of the modeling technique for planning processes in civil engineering projects.},
  subject      = {Baubetrieb},
  language  = {en}
}
@inproceedings{HoyanoNakaohkuboAsawa2004,
  author    = {Hoyano, Akira and Nakaohkubo, Kazuaki and Asawa, Takashi},
  title     = {Development of Thermal Simulation Tool for Urban Block Design - Based on Numerical Simulation System using 3D},
  doi       = {10.25643/bauhaus-universitaet.97},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-973},
  year      = {2004},
  abstract  = {A simulation system has been developed as a computer aided design tool to evaluate the effect of proposed design on the thermal environment during the designing process. This system calculates outdoor surface temperatures in order to evaluate the thermal impact of a design factor in outdoor space. In this study, the previous heat balance simulation system was improved to predict the surface temperature of a proposed design using 3D-CAD. This system is able to input the complicated outdoor spatial forms ef\&\#64257;ciently and also to evaluate the surface temperature distribution from any viewpoint.},
  subject      = {Stadtplanung},
  language  = {en}
}
@article{PalaneeswaranKumaraswamyNg2004,
  author    = {Palaneeswaran, Ekambaram and Kumaraswamy, Mohan and Ng, Thomas},
  title     = {Knowledge Management for Small and Medium Contractors},
  doi       = {10.25643/bauhaus-universitaet.258},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2582},
  year      = {2004},
  abstract  = {Effective knowledge management is increasingly considered as a cornerstone of sustainable business success. Knowledge management systems are strategically valuable for both ensuring consistency and continuous improvement of various aspects such as quality delivery, productivity and competitiveness. The small and medium enterprises (SMEs) in the construction industry are mostly operating under tighter timeframes, narrower profit margins and more constrained resources. Hence the recently commenced SMILE-SMC (Strategic Management with Information Leveraged Excellece for Small and Medium Contractors) project aims to support the information and knowledge management needs of the small and medium contractors in Hong Kong. This paper presents some snapshots on the SMILE-SMC project, and its conceptualized deliverables with some highlights of recent developments.},
  subject      = {Wissensmanagement},
  language  = {en}
}
@inproceedings{Lee2004,
  author    = {Lee, Yungui},
  title     = {Development and application of CAD software in the field of building structures in China},
  doi       = {10.25643/bauhaus-universitaet.89},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-898},
  year      = {2004},
  abstract  = {PKPM series CAD software is an integrated CAD system for building design, which integrated the following parts: architectural design, structural design, building service design and statistic analysis of quantity and budget. These four parts share the same database with high efficiency. Over 80\% of design corporation in China are using PKPM series CAD software. The detailed information and some key modules of PKPM series CAD software are mainly introduced in this paper.},
  subject      = {Bautechnik},
  language  = {en}
}
@inproceedings{HaapalainenNaaranojaLonka2004,
  author    = {Haapalainen, P{\"a}ivi and Naaranoja, Marja and Lonka, Heikki},
  title     = {How to Prevent Project Knowledge Management Failures in Construction - IT Enabled Communication Perspective},
  doi       = {10.25643/bauhaus-universitaet.1970},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1977},
  year      = {2004},
  abstract  = {This article discusses how the failures of construction projects could be prevented. The focus is on using IT tools in communication. The article is based on the findings of the PROLABproject. The project seeks to find solutions for how the information can effectively be used in project management, specially in construction projects, what kind of procedures help the management of the knowledge and how the obstacles for efficient ways of administrating the information can be removed. These obstacles can be either related to use of new technology or to organization culture. The paper discusses e-mail as a medium of communication with the media richness framework (Fulk \& Boyd 1991) based on the interviews done with the participants of construction projects. We found out that the emails were used in both rich way and not so rich way. Obstacles of rich use of IT communication were partly technical and partly psychological. Technology acceptance model (TAM) is used to study the actual use of emails in communication. Obstacles of the use of emails were mostly individual differences like the skills to use the system or external variables like they did not have proper software to open the attachments. Also people talked about information overload. Emails often push too much information. Keywords: IT tools, Communication, Knowledge management, Construction},
  subject      = {Hochschulbildung},
  language  = {en}
}
@inproceedings{ElRayesKandil2004,
  author    = {El-Rayes, Khaled and Kandil, Amr},
  title     = {Distributed Computing for the Optimization of Large-Scale Construction Projects},
  doi       = {10.25643/bauhaus-universitaet.160},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1601},
  year      = {2004},
  abstract  = {Available construction time-cost trade-off analysis models can be used to generate trade-offs between these two important objectives, however, their application is limited in large-scale construction projects due to their impractical computational requirements. This paper presents the development of a scalable and multi-objective genetic algorithm that provides the capability of simultaneously optimizing construction time and cost large-scale construction projects. The genetic algorithm was implemented in a distributed computing environment that utilizes a recent standard for parallel and distributed programming called the message passing interface (MPI). The performance of the model is evaluated using a set of measures of performance and the results demonstrate the capability of the present model in significantly reducing the computational time required to optimize large-scale construction projects.},
  subject      = {Baubetrieb},
  language  = {en}
}
@inproceedings{RobertNicoudRaphaelSmith2004,
  author    = {Robert-Nicoud, Yvan and Raphael, Benny and Smith, Ian F. C.},
  title     = {Using entropy to maximize the usefulness of data collection},
  doi       = {10.25643/bauhaus-universitaet.117},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1177},
  year      = {2004},
  abstract  = {This paper presents a generic methodology for measurement system configuration when the goal is to identify behaviour models that reasonably explain observations. For such tasks, the best measurement system provides maximum separation between candidate models. In this work, the degree of separation between models is measured using Shannon's Entropy Function. The location and type of measurement devices are chosen such that the entropy of candidate models is greatest. This methodology is tested on a laboratory structure and, to demonstrate generality, an existing fresh water supply network in a city in Switzerland. In both cases, the methodology suggests an appropriate set of sensors for identifying the state of the system.},
  subject      = {Mobile Computing},
  language  = {en}
}
@inproceedings{Pavlov2004,
  author    = {Pavlov, Alexander},
  title     = {Data Transfer and Objects Recognition in Building Design},
  doi       = {10.25643/bauhaus-universitaet.126},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-1265},
  year      = {2004},
  abstract  = {The problem of data interoperability is now very important. The formal description of construction systems and objects must base upon the modeling for the description of construction data domain. The XML-language was selected as a basis of a universal data format, ensuring natural hierarchy of objects, flexibility, good layout and expandability. The language, developed by the author, is called Building Object Description Extensible Markup Language (bodXML). The types of all objects used by data transfer should be definite beforehand with existing methods of programming. It limits the possibilities of IT in application of new types. But the recipient software must recognize the building objects even if the kind of object is unknown at the outset. The author offers a set of main topological and geometric properties being sufficient for recognition of main three-dimensional building constructions with flat edges. The tests of artificial neuron network have shown that the recognition of a kind of the constructions represented as a set of indicated parameters happens enough confidently.},
  subject      = {Bauwerk},
  language  = {en}
}