@article{HarirchianKumariJadhavetal., author = {Harirchian, Ehsan and Kumari, Vandana and Jadhav, Kirti and Rasulzade, Shahla and Lahmer, Tom and Raj Das, Rohan}, title = {A Synthesized Study Based on Machine Learning Approaches for Rapid Classifying Earthquake Damage Grades to RC Buildings}, series = {Applied Sciences}, volume = {2021}, journal = {Applied Sciences}, number = {Volume 11, issue 16, article 7540}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app11167540}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210818-44853}, pages = {1 -- 33}, abstract = {A vast number of existing buildings were constructed before the development and enforcement of seismic design codes, which run into the risk of being severely damaged under the action of seismic excitations. This poses not only a threat to the life of people but also affects the socio-economic stability in the affected area. Therefore, it is necessary to assess such buildings' present vulnerability to make an educated decision regarding risk mitigation by seismic strengthening techniques such as retrofitting. However, it is economically and timely manner not feasible to inspect, repair, and augment every old building on an urban scale. As a result, a reliable rapid screening methods, namely Rapid Visual Screening (RVS), have garnered increasing interest among researchers and decision-makers alike. In this study, the effectiveness of five different Machine Learning (ML) techniques in vulnerability prediction applications have been investigated. The damage data of four different earthquakes from Ecuador, Haiti, Nepal, and South Korea, have been utilized to train and test the developed models. Eight performance modifiers have been implemented as variables with a supervised ML. The investigations on this paper illustrate that the assessed vulnerability classes by ML techniques were very close to the actual damage levels observed in the buildings.}, subject = {Maschinelles Lernen}, language = {en} } @article{TarabenMorgenthal, author = {Taraben, Jakob and Morgenthal, Guido}, title = {Integration and Comparison Methods for Multitemporal Image-Based 2D Annotations in Linked 3D Building Documentation}, series = {Remote Sensing}, volume = {2022}, journal = {Remote Sensing}, number = {Volume 14, issue 9, article 2286}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/rs14092286}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220513-46488}, pages = {1 -- 20}, abstract = {Data acquisition systems and methods to capture high-resolution images or reconstruct 3D point clouds of existing structures are an effective way to document their as-is condition. These methods enable a detailed analysis of building surfaces, providing precise 3D representations. However, for the condition assessment and documentation, damages are mainly annotated in 2D representations, such as images, orthophotos, or technical drawings, which do not allow for the application of a 3D workflow or automated comparisons of multitemporal datasets. In the available software for building heritage data management and analysis, a wide range of annotation and evaluation functions are available, but they also lack integrated post-processing methods and systematic workflows. The article presents novel methods developed to facilitate such automated 3D workflows and validates them on a small historic church building in Thuringia, Germany. Post-processing steps using photogrammetric 3D reconstruction data along with imagery were implemented, which show the possibilities of integrating 2D annotations into 3D documentations. Further, the application of voxel-based methods on the dataset enables the evaluation of geometrical changes of multitemporal annotations in different states and the assignment to elements of scans or building models. The proposed workflow also highlights the potential of these methods for condition assessment and planning of restoration work, as well as the possibility to represent the analysis results in standardised building model formats.}, subject = {Bauwesen}, language = {en} } @article{Hanna, author = {Hanna, John}, title = {Computational Modelling for the Effects of Capsular Clustering on Fracture of Encapsulation-Based Self-Healing Concrete Using XFEM and Cohesive Surface Technique}, series = {Applied Sciences}, volume = {2022}, journal = {Applied Sciences}, number = {Volume 12, issue 10, article 5112}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app12105112}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220721-46717}, pages = {1 -- 17}, abstract = {The fracture of microcapsules is an important issue to release the healing agent for healing the cracks in encapsulation-based self-healing concrete. The capsular clustering generated from the concrete mixing process is considered one of the critical factors in the fracture mechanism. Since there is a lack of studies in the literature regarding this issue, the design of self-healing concrete cannot be made without an appropriate modelling strategy. In this paper, the effects of microcapsule size and clustering on the fractured microcapsules are studied computationally. A simple 2D computational modelling approach is developed based on the eXtended Finite Element Method (XFEM) and cohesive surface technique. The proposed model shows that the microcapsule size and clustering have significant roles in governing the load-carrying capacity and the crack propagation pattern and determines whether the microcapsule will be fractured or debonded from the concrete matrix. The higher the microcapsule circumferential contact length, the higher the load-carrying capacity. When it is lower than 25\% of the microcapsule circumference, it will result in a greater possibility for the debonding of the microcapsule from the concrete. The greater the core/shell ratio (smaller shell thickness), the greater the likelihood of microcapsules being fractured.}, subject = {Beton}, language = {en} } @article{Koenig, author = {K{\"o}nig, Reinhard}, title = {Interview on Information Architecture}, series = {Swiss Architecture in the Moving Image}, journal = {Swiss Architecture in the Moving Image}, doi = {10.25643/bauhaus-universitaet.2507}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180422-25078}, pages = {151 -- 154}, abstract = {Interview on Information Architecture}, subject = {Architektur}, language = {en} } @article{SirtlHadlichKrausetal., author = {Sirtl, Christin and Hadlich, Christiane and Kraus, Matthias and Osburg, Andrea}, title = {Determination of Bonding Failures in Transparent Materials with Non-Destructive Methods - Evaluation of Climatically Stressed Glued and Laminated Glass Compounds}, series = {World Journal of Engineering and Technology}, volume = {2018}, journal = {World Journal of Engineering and Technology}, number = {Vol. 6, No 2}, doi = {10.4236/wjet.2018.62020}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180606-37526}, pages = {315 -- 331}, abstract = {As part of an international research project - funded by the European Union - capillary glasses for facades are being developed exploiting storage energy by means of fluids flowing through the capillaries. To meet highest visual demands, acrylate adhesives and EVA films are tested as possible bonding materials for the glass setup. Especially non-destructive methods (visual analysis, analysis of birefringent properties and computed tomographic data) are applied to evaluate failure patterns as well as the long-term behavior considering climatic influences. The experimental investigations are presented after different loading periods, providing information of failure developments. In addition, detailed information and scientific findings on the application of computed tomographic analyses are presented.}, subject = {Klebtechnik}, language = {en} } @masterthesis{Boewe, type = {Bachelor Thesis}, author = {B{\"o}we, Annelie}, title = {Entscheidungsfindung im Herstellungsprozess von Br{\"u}ckenkappen}, doi = {10.25643/bauhaus-universitaet.1644}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120425-16447}, school = {Bauhaus-Universit{\"a}t Weimar}, abstract = {Im Rahmen dieser Arbeit wurde die Entscheidungsfindung im Herstellungsprozess von Br{\"u}ckenkappen untersucht. Es stellte sich heraus, dass die Fuzzy-Methode ein geeignetes Werkzeug sein k{\"o}nnte, die Teilprozesse auf die M{\"o}glichkeit ihrer Parallelisierung hin zu untersuchen. Um diese Theorie zu testen, wurde auf den Grundlagen von Arbeiten der Professur Baubetrieb und Bauverfahren der Prozess n{\"a}her analysiert und unterst{\"u}tzend durch eigene Recherchen ein UML-Diagramm erstellt, welches als Aktivit{\"a}tsdiagramm ausgebildet wurde. Aufbauend auf diesem Ablauf und den gewonnenen Kenntnissen zur Herstellung einer Br{\"u}ckenkappe, konnten die einzelnen Prozesse zu Teilprozessen, sogenannten Bausteinen, zusammengefasst werden. Diese Bausteine sind entstanden, um die Simulation m{\"o}glich zu machen, indem der Ablauf weniger komplex wird und nur die Prozesse zu beurteilen sind, die beeinflusst bzw. in ihrer Reihenfolge bis zu einem gewissen Grad variabel sind. Eine erleichterte Interaktion mit den Bausteinen und deren {\"U}berf{\"u}hrung in ein Simulationsprogramm wurde {\"u}ber Templates realisiert. So besitzt jeder Baustein eine einheitliche Struktur. Unter anderem beinhalten die Bausteine die jeweiligen Ressourcen und Parameter, sowie die Abh{\"a}ngigkeiten der Prozesse untereinander und die zugeh{\"o}rige Priorit{\"a}t. Zur Entscheidungsfindung wurde die Fuzzylogik herangezogen und die Problemstellung der Parallelisierung zum Ziel gesetzt. Die Realisierung wurde {\"u}ber einen Entscheidungsbaum und das daraus resultierende Regelwerk erreicht. Somit ließen sich, ausgehend von einem festgelegten Prozess und durch die Fuzzifizierung der Eingangsparameter Priorit{\"a}t, Prozessdauer und Verf{\"u}gbarkeit der Ressourcen und Arbeitskr{\"a}fte, verschiedene Pfade identifizieren, allerdings nur in Verbindung mit den vorher analysierten Abh{\"a}ngigkeiten. F{\"u}r jeden der Eingangsparameter wurden so Fuzzy-Sets erstellt. {\"U}ber den Entscheidungsbaum, welcher mit den linguistischen Variablen versehen wurde, konnte {\"u}ber sogenannte "und" - Verkn{\"u}pfungen das Regelwerk aufgestellt werden. Das gek{\"u}rzte Regelwerk in dieser Arbeit beinhaltet grunds{\"a}tzlich nur die Regeln, die auch zu einer wirklichen Entscheidung f{\"u}hren. Daraus folgt, dass es m{\"o}glich ist mittels der Fuzzy-Methode eine Entscheidung dar{\"u}ber zu f{\"a}llen, ob zwei Prozesse zu parallelisieren sind oder nicht und aufgetretene Verz{\"o}gerungen wieder eingeholt werden k{\"o}nnen.}, subject = {Entscheidungsfindung}, language = {de} } @masterthesis{Schumann, type = {Bachelor Thesis}, author = {Schumann, Alexander}, title = {Untersuchung und Beurteilung des Rissverhaltens eines Betongelenkes anhand unterschiedlicher Methoden}, doi = {10.25643/bauhaus-universitaet.1982}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20130722-19829}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {95}, abstract = {Die Bruchmechanik hat einen wichtigen Platz im modernen Bauingenieurwesen, um die Ausbreitung von Rissen in Bauteilen und ihre Gef{\"a}hrlichkeit einzusch{\"a}tzen. Dabei kommen verschiedenste Methoden zum Einsatz. In dieser Arbeit soll die Qualit{\"a}tsbewertung f{\"u}r einige dieser Methoden untersucht werden. Zu vergleichen sind u. a. die Genauigkeit, die Schnelligkeit, die Komplexit{\"a}t und die Stabilit{\"a}t. In den Vergleich sind die Finite Elemente Methode, die Extended Finite Elemente Methode und eine Kopplungsmethode (analytische L{\"o}sung f{\"u}r die Rissspitze und Finite Elemente L{\"o}sung f{\"u}r den Rest des Gebietes) einzubeziehen. Als reales Beispiel aus dem Bauingenieurwesen wird ein Betongelenk mit einem vorhandenen Riss betrachtet.}, subject = {Finite Elemente Methode}, language = {de} } @masterthesis{Mueller, type = {Bachelor Thesis}, author = {M{\"u}ller, Naira}, title = {Erweiterung von Fliplife mit bauphysikalischen Inhalten}, doi = {10.25643/bauhaus-universitaet.1676}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120704-16763}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {105}, abstract = {In dieser Arbeit wurde ein Konzept erstellt, das Fliplife um einen bauphysikalischen Karriereweg erweitert. In das Spiel wurden beispielhaft bauphysikalische Inhalte sowie spielkonzept-kompatible und wissensvermittelnde Spielmechaniken implementiert.}, subject = {Social Game}, language = {de} } @inproceedings{SirtlKraus, author = {Sirtl, Christin and Kraus, Matthias}, title = {Bonding Quality of Joined Glass Components Exposed to UV and Fluidic Influences}, publisher = {Ernst \& Sohn Verlag f{\"u}r Architektur und technische Wissenschaften GmbH \& Co. KG}, address = {Berlin}, isbn = {978-3-433-03269-5}, doi = {10.25643/bauhaus-universitaet.3914}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190514-39144}, pages = {10}, abstract = {Components of structural glazing have to meet different requirements and resist various impacts, depending on the field of application. Within an international research project of the EU innovation program Horizon 2020, special glass panes with a fluid circulating in capillaries are developed exploiting solar energy. Major influences to this glazing are UV irradiation and the fluidic contact, effecting the mechanical and optical durability of the bonding material within the glass setup. Regarding to visual requirements, acrylate adhesives and EVA films are analyzed as possible bonding materials by destructive and non-destructive testing methods. Two types of specimen are presented for obtaining the mechanical behavior and the surface appearances of the bonding material.}, subject = {Alterung}, language = {en} } @inproceedings{VoellmeckeSchwendnerHoetal., author = {V{\"o}llmecke, Lars and Schwendner, Sascha and Ho, Ai Phien and Fischer, Jens and Seim, Werner}, title = {Assessment of nailed connections in existing structures}, doi = {10.25643/bauhaus-universitaet.6361}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230609-63615}, pages = {7}, abstract = {This paper presents the development of an assessment scheme for a visual qualitative evaluation of nailed connections in existing structures, such as board trusses. In terms of further use and preservation, a quick visual inspection will help to evaluate the quality of a structure regarding its load-bearing capacity and deformation behaviour. Tests of old and new nailed joints in combination with a rating scheme point out the correlation between the load-bearing capacity and condition of a joint. Old joints of comparatively good condition tend to exhibit better results than those of poor condition. Moreover, aged joints are generally more load-bearing than newly assembled ones.}, subject = {Holzbau}, language = {en} } @phdthesis{MizrakBilen, author = {Mizrak Bilen, Burcin}, title = {A Power-Centered Approach to the Capitalization of Climate Change in Property Sector and Strategic Limitation}, doi = {10.25643/BAUHAUS-UNIVERSITAET.3840}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190107-38406}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {256}, abstract = {The capitalization of 'certified' sustainable building sector will be investigated over the power theory of value approach of Jonathan Nitzan and Shimshon Bichler. The study will be initiated by questioning why the environment problems are one of the first items on the agenda and by sharing the ideas of scholars who approaches the subject skeptically, because the predominant literature underlying the necessity and prominence of the topic is already well-known and adapted by the majority. Over the theory developed by Nitzan and Bichler, the concepts of capitalization, strategic sabotage, power, legitimacy, and obedience will be discussed. The hypothesis of "the absentee owners of the construction sector, holding the whip hand and capitalizing the ecology, control the growth and the creativity of green building production and make it carbon-dependent, in order to increase their profit margin" will be questioned. To strengthen the arguments in the hypothesis, the factors, the institutional arrangements, value measurement methods, which affect directly the net present value, will be investigated both in corporation and in building scale in detail, because net present value/ capitalization is asserted as the most important criteria by Nitzan and Bichler to make the investment decisions in the capitalist economic system. To trace the implications of power and the strategic sabotage that power caused, as the empirical dimension of this dissertation, an interface exploring the correlational ties between the climate responsive architecture and the ever changing political, economical, and social contexts and building economics praxis by decades will be developed and the expert interviews will be conducted with the design teams and the appraisers.}, subject = {Klima{\"a}nderung}, language = {en} } @periodical{AinioBartetzkyGyőrffyetal., author = {Ainio, Anna and Bartetzky, Arnold and Győrffy, Rachel and Islam, Naslima and Khvadagiani, Irakli and Kibel, Jochen and Landau-Donnelly, Friederike and Leko, Kristina and Lenz, Patricia and Onuoha, Nnenna and Rathjen, Lukas and Reinsch, Natalie and Rykov, Anatol and Tajeri, Niloufar and Ullmanov{\´a}, Kl{\´a}ra}, title = {Censored? Conflicted Concepts of Cultural Heritage}, editor = {Din{\c{c}}{\c{c}}ağ Kahveci, Ay{\c{s}}eg{\"u}l and Hajdu, Marcell and H{\"o}hne, Wolfram and Jesse, Darja and Karpf, Michael and Torres Ruiz, Marta}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-95773-304-7}, doi = {10.25643/bauhaus-universitaet.4927}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230213-49276}, pages = {181}, abstract = {Those who ask how social entities relate to the past, enter a field defined by competing interpretations and contested practices of a collectively shared heritage. Dissent and conflict among heritage communities represent productive moments in the negotiation of these varying constructs of the past, identities, and heritage. At the same time, they lead to omissions, the overwriting and amendment of existing constructs. A closer look at all that is suppressed, excluded or rejected opens up new perspectives: It reveals how social groups are formed through public disputes upon the material foundations of heritage constructs. Taking the concept of censorship, the volume engages with the exclusionary and inclusionary mechanisms that underlie the construction of heritage and thus social identities. Censorship is understood here as a discursive strategy in public debates. In current debates, allegations of censorship surface primarily in cases where the handling of a certain heritage constructs is subjected to critical evaluation, or on the contrary, needs to be protected from criticism or even destruction. The authors trace the connection between heritage and identity and show that identity constructs are not only manifested within heritage but are actively negotiated through it.}, subject = {Kulturerbe}, language = {en} } @phdthesis{Achenbach, author = {Achenbach, Marcus}, title = {Weiterentwicklung der Zonenmethode f{\"u}r den Nachweis der Feuerwiderstandsdauer von rechteckigen Stahlbetondruckgliedern}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-95773-264-4}, doi = {10.25643/bauhaus-universitaet.3848}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20190119-38484}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {174}, abstract = {Die Zonenmethode nach Hertz ist ein vereinfachtes Verfahren zur Heißbemessung von Stahlbetonbauteilen. Um eine h{\"a}ndische Bemessung zu erm{\"o}glichen, werden daher verschiedene Annahmen und Vereinfachungen getroffen. Insbesondere werden die thermischen Dehnungen vernachl{\"a}ssigt und das mechanische Verhalten durch einen verkleinerten Querschnitt mit konstanten Stoffeigenschaften beschrieben. Ziel der vorliegenden Arbeit ist, dieses vereinfachte Verfahren in ein nichtlineares Verfahren zur Heißbemessung von Stahlbetondruckgliedern bei Brandbeanspruchung durch die Einheits-Temperaturzeitkurve zu {\"u}berf{\"u}hren. Dazu werden die wesentlichen Annahmen der Zonenmethode {\"u}berpr{\"u}ft und ein Vorschlag zur Weiterentwicklung vorgestellt. Dieser beruht im Wesentlichen auf der Modellierung der druckbeanspruchten Bewehrung. Diese weiterentwickelte Zonenmethode wird durch die Nachrechnung von Laborversuchen validiert und das Sicherheitsniveau durch eine vollprobabilistische Analyse und den Vergleich mit dem allgemeinen Verfahren bestimmt.}, subject = {Bautechnik}, language = {de} } @misc{Habtemariam, type = {Master Thesis}, author = {Habtemariam, Abinet Kifle}, title = {Numerical Demolition Analysis of a Slender Guyed Antenna Mast}, doi = {10.25643/bauhaus-universitaet.4460}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210723-44609}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {75}, abstract = {The main purpose of the thesis is to ensure the safe demolition of old guyed antenna masts that are located in different parts of Germany. The major problem in demolition of this masts is the falling down of the masts in unexpected direction because of buckling problem. The objective of this thesis is development of a numerical models using finite element method (FEM) and assuring a controlled collapse by coming up with different time setups for the detonation of explosives which are responsible for cutting down the cables. The result of this thesis will avoid unexpected outcomes during the demolition processes and prevent risk of collapsing of the mast over near by structures.}, subject = {Abbruch}, language = {en} } @phdthesis{Berhe, author = {Berhe, Asgedom Haile}, title = {Mitigating Risks of Corruption in Construction: A theoretical rationale for BIM adoption in Ethiopia}, doi = {10.25643/bauhaus-universitaet.4517}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211007-45175}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {336}, abstract = {This PhD thesis sets out to investigate the potentials of Building Information Modeling (BIM) to mitigate risks of corruption in the Ethiopian public construction sector. The wide-ranging capabilities and promises of BIM have led to the strong perception among researchers and practitioners that it is an indispensable technology. Consequently, it has become the frequent subject of science and research. Meanwhile, many countries, especially the developed ones, have committed themselves to applying the technology extensively. Increasing productivity is the most common and frequently cited reason for that. However, both technology developers and adopters are oblivious to the potentials of BIM in addressing critical challenges in the construction sector, such as corruption. This particularly would be significant in developing countries like Ethiopia, where its problems and effects are acute. Studies reveal that bribery and corruption have long pervaded the construction industry worldwide. The complex and fragmented nature of the sector provides an environment for corruption. The Ethiopian construction sector is not immune from this epidemic reality. In fact, it is regarded as one of the most vulnerable sectors owing to varying socio-economic and political factors. Since 2015, Ethiopia has started adopting BIM, yet without clear goals and strategies. As a result, the potential of BIM for combating concrete problems of the sector remains untapped. To this end, this dissertation does pioneering work by showing how collaboration and coordination features of the technology contribute to minimizing the opportunities for corruption. Tracing loopholes, otherwise, would remain complex and ineffective in the traditional documentation processes. Proceeding from this anticipation, this thesis brings up two primary questions: what are areas and risks of corruption in case of the Ethiopian public construction projects; and how could BIM be leveraged to mitigate these risks? To tackle these and other secondary questions, the research employs a mixed-method approach. The selected main research strategies are Survey, Grounded Theory (GT) and Archival Study. First, the author disseminates an online questionnaire among Ethiopian construction engineering professionals to pinpoint areas of vulnerability to corruption. 155 responses are compiled and scrutinized quantitatively. Then, a semi-structured in-depth interview is conducted with 20 senior professionals, primarily to comprehend opportunities for and risks of corruption in those identified highly vulnerable project stages and decision points. At the same time, open interviews (consultations) are held with 14 informants to be aware of state of the construction documentation, BIM and loopholes for corruption in the country. Consequently, these qualitative data are analyzed utilizing the principles of GT, heat/risk mapping and Social Network Analysis (SNA). The risk mapping assists the researcher in the course of prioritizing corruption risks; whilst through SNA, methodically, it is feasible to identify key actors/stakeholders in the corruption venture. Based on the generated research data, the author constructs a [substantive] grounded theory around the elements of corruption in the Ethiopian public construction sector. This theory, later, guides the subsequent strategic proposition of BIM. Finally, 85 public construction related cases are also analyzed systematically to substantiate and confirm previous findings. By ways of these multiple research endeavors that is based, first and foremost, on the triangulation of qualitative and quantitative data analysis, the author conveys a number of key findings. First, estimations, tender document preparation and evaluation, construction material as well as quality control and additional work orders are found to be the most vulnerable stages in the design, tendering and construction phases respectively. Second, middle management personnel of contractors and clients, aided by brokers, play most critical roles in corrupt transactions within the prevalent corruption network. Third, grand corruption persists in the sector, attributed to the fact that top management and higher officials entertain their overriding power, supported by the lack of project audits and accountability. Contrarily, individuals at operation level utilize intentional and unintentional 'errors' as an opportunity for corruption. In light of these findings, two conceptual BIM-based risk mitigation strategies are prescribed: active and passive automation of project audits; and the monitoring of project information throughout projects' value chain. These propositions are made in reliance on BIM's present dimensional capabilities and the promises of Integrated Project Delivery (IPD). Moreover, BIM's synchronous potentials with other technologies such as Information and Communication Technology (ICT), and Radio Frequency technologies are topics which received a treatment. All these arguments form the basis for the main thesis of this dissertation, that BIM is able to mitigate corruption risks in the Ethiopian public construction sector. The discourse on the skepticisms about BIM that would stem from the complex nature of corruption and strategic as well as technological limitations of BIM is also illuminated and complemented by this work. Thus, the thesis uncovers possible research gaps and lays the foundation for further studies.}, subject = {Building Information Modeling}, language = {en} } @phdthesis{Goebel, author = {G{\"o}bel, Michael}, title = {FASER-KUNSTSTOFF-METALL-GLAS-HYBRIDSYSTEME UND DEREN EINSATZ IN TRAGENDEN KONSTRUKTIONEN}, doi = {10.25643/bauhaus-universitaet.1990}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20131217-19909}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {334}, abstract = {Die Entwicklung von Hybridtechnologien f{\"u}hrt zu vielen neuartigen und effizienten Anwen-dungen. Hybridtechnologien kommen immer dann zum Einsatz, wenn die ausschließliche Nutzung einer Technologie oder eines Werkstoffs nicht zum gew{\"u}nschten Ergebnis f{\"u}hrt. Dann kann durch Kombination unterschiedlicher Werkstoffe oder Technologien ein System geschaffen werden, das in seiner Konfiguration ein Optimum an Eigenschaften darstellt. Im Bauwesen geht die Entwicklung schon seit jeher in Richtung von immer schlankeren ar-chitektonisch ansprechenden Konstruktionen. In der gegenw{\"a}rtigen Entwicklung erm{\"o}glichen hochtechnologische Kunststoffe und Faserwerkstoffe, wie z. B. Kohlenstofffasern, sehr schlanke, leichte und dennoch hochtragf{\"a}higer Konstruktionen. Der wirtschaftliche Aspekt bei der Entwicklung von Tragsystemen bzw. -strukturen erfordert dabei in fast allen F{\"a}llen eine kosteng{\"u}nstig effiziente Ausbildung und die Optimierung von Trageigenschaften und Kostenfaktoren. Daher besteht oft die Anforderung nach einem Verbundsystem, bei dem unterschiedliche Materialien in der Art miteinander kombiniert werden, dass jeder Werkstoff f{\"u}r eine bestimmte Beanspruchung angeordnet wird und sein Tragf{\"a}higkeitspotenzial optimal aussch{\"o}pft. Im Rahmen dieser Arbeit werden an konkreten Beispielen M{\"o}glichkeiten aufge-zeigt, Hochtechnologiewerkstoffe in effizienter Art und Weise zu nutzen. Der Kunststoff-Faser-Verbundwerkstoff stellt eine M{\"o}glichkeit dar, den als solches nur f{\"u}r d{\"u}nnschichtige Klebverbindungen nutzbaren Klebstoff in seinen Anwendungsm{\"o}glichkeiten zu erweitern. Die Fasern wirken dabei dem mechanischen Schwachpunkt des Klebstoffs, einer nur geringen Zugfestigkeit, effektiv entgegen. Mit faserverst{\"a}rkten Klebstoff k{\"o}nnen Anwendungen realisiert werden, bei denen der Klebstoff auch zur Zugkraft{\"u}bertragung ge-nutzt wird. Zus{\"a}tzlich bieten F{\"u}llstoffe eine M{\"o}glichkeit, die Steifigkeit des Klebstoffs zu stei-gern, was f{\"u}r viele mechanischen Beanspruchungen Vorteile mit sich bringt. Die Kombination aus einem partikelgef{\"u}llten und zus{\"a}tzlich faserverst{\"a}rkten Klebstoff f{\"u}hrt zu einem Ver-bundwerkstoff, der f{\"u}r viele unterschiedliche Anwendungen geeignet ist. Praktische Anwen-dungsm{\"o}glichkeiten finden sich in der Herstellung von Fassadenelementen, wo der faserver-st{\"a}rkte Klebstoff zur Verbindung von Aluminiumhohlprofilen verwendet wird. Weitere Anwen-dungsgebiete erstrecken sich auf die Zugkraftbewehrung von Betontragelementen, bei denen der faserverst{\"a}rkte Klebstoff die Rolle einer Zugbewehrung an der Betonoberfl{\"a}che {\"u}bernimmt. Alu-CFK-Hybridelemente erm{\"o}glichen die Herstellung sehr effizienter Tragsysteme, bei de-nen Gewichtsreduzierung der Tragstruktur und Kosteneinsparungen im Betrieb des Bauwerks gleichermaßen erm{\"o}glicht werden. Die CFK-Lamellen werden dabei in den am st{\"a}rksten l{\"a}ngskraftbeanspruchten Bereichen eines Aluminiumtragelementes angeordnet, wodurch sich die Biegetragf{\"a}higkeit des dann hybriden Tragelements signifikant erh{\"o}ht. In der Folge k{\"o}nnen Gewichtsreduzierungen, verglichen mit herk{\"o}mmlichen Aluminiumtragelementen, erzielt werden. Weiterhin k{\"o}nnen die Querschnittsaußenmaße bei Alu-CFK-Hybridelementen deutlich reduziert werden. In der Folge vereinfachen sich der Transport und die Montage dieser Art Tragwerke, was besonders bei fliegenden Bauten einen wesentlichen Vorteil dar-stellt. Der Einsatz von Glas-Kunststoff-Hybridelementen erm{\"o}glicht die Konstruktion transparenter Tragstrukturen in einer optisch einzigartigen Qualit{\"a}t. Die Konstruktion eines Glas-Kunststoff-Hybridelementes erm{\"o}glicht ein redundant wirkendes Tragverhalten, bei dem die Steifigkeit und optische Qualit{\"a}t des Glases optimal im Tragsystem genutzt werden k{\"o}nnen. Der Kunst-stoff stellt eine Art Sicherheitselement dar und {\"u}bernimmt im Falle eines Glasbruchs die Tragwirkung des Glases. Die Eigenschaft der Vorank{\"u}ndigung eines Systemversagens stellt die Grundlage f{\"u}r eine baupraktische Anwendung des Glas-Kunststoff-Hybridelementes als statisches Tragsystem dar. Durch die Redundanz des Tragverhaltens von Glas-Kunststoff-Hybridelementen ist das Versagen dieser Tragstruktur durch optische oder strukturelle An-zeichen erkennbar und eine Bemessung somit m{\"o}glich. F{\"u}r die mechanische Analyse grundlegender Zusammenh{\"a}nge in Hybridsystemen k{\"o}nnen ingenieurm{\"a}ßige, analytische und numerische Betrachtungen durchgef{\"u}hrt werden. Die in-genieurm{\"a}ßigen Betrachtungen sind sehr gut geeignet, um Absch{\"a}tzungen zu treffen, die in sp{\"a}ter durchgef{\"u}hrten experimentellen Bauteiluntersuchungen oft auch ihre Best{\"a}tigung fan-den. Bei Detailbetrachtungen, wie z. B. der Analyse eines nichtlinearen Spannungsverlaufes in mechanisch beanspruchten Klebfugen, bietet eine numerische Betrachtung mittels FEM Vorteile, da sie eine sehr detaillierte Auswertung in Bereichen mit hohen Spannungsgradien-ten erm{\"o}glicht. Durch die Anwendung der FEM ist es m{\"o}glich, Strukturen in unterschiedlichen Skalierungsbereichen zu analysieren und dabei auch Bereiche einzubeziehen, die f{\"u}r experimentelle Untersuchungen nur sehr schwer zug{\"a}nglich sind. Genaue Kenntnisse {\"u}ber das Materialverhalten der zu analysierenden Stoffe stellen dabei eine wesentliche Grundlage f{\"u}r die Erstellung qualitativ hochwertiger Rechenmodelle dar.}, subject = {Klebstoff-Faser-Verbundwerkstoff; Alu-Carbon-Hybridelement; Glas-Kunststoff-Hybridelement; ANSYS; CFK; Klebverbindungen}, language = {de} } @phdthesis{Wellnitz, author = {Wellnitz, Felix}, title = {BAUKLIMATISCHE ERT{\"U}CHTIGUNG UND NACHHALTIGE INSTANDSETZUNG DENKMALGESCH{\"U}TZTER VERWALTUNGSBAUTEN DER 1950er JAHRE AM BEISPIEL DER EHEMALIGEN BAYERISCHEN LANDESVERTRETUNG VON SEP RUF IN BONN}, doi = {10.25643/bauhaus-universitaet.2303}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20140919-23031}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {172}, abstract = {Viele Baudenkmale sind dem Konflikt aus baulichem Instandsetzungsbedarf f{\"u}r eine zeitgem{\"a}ße Nutzung und einer sich m{\"o}glicherweise daraus ergebenden Gef{\"a}hrdung der Denkmalsubstanz ausgesetzt. Gr{\"u}nde sind steigende Energiekosten f{\"u}r den Geb{\"a}udebetrieb, zeitgem{\"a}ße Anforderungen an Behaglichkeit und Arbeitsschutz, sowie die Vermeidung von Sch{\"a}den an der Substanz aufgrund baulicher M{\"a}ngel des konstruktiven W{\"a}rme- und Feuchteschutzes. Gleichzeitig gilt f{\"u}r viele Bauten aber auch die Notwendigkeit regelm{\"a}ßiger Nutzung und Bewirtschaftung, um den Erhalt {\"u}berhaupt zu sichern. Die energetische Ert{\"u}chtigung von Baudenkmalen scheitert in diesem Spannungsfeld oft am unl{\"o}sbaren Konflikt zwischen dem Erhalt der bauzeitlichen Substanz auf der einen und der notwendigen energetischen Optimierung der Geb{\"a}udeh{\"u}lle auf der anderen Seite. Zielsetzung dieser Fallstudie ist die beispielhafte Entwicklung einer bauklimatischen und denkmalgerechten Ert{\"u}chtigungsstrategie am Beispiel eines Verwaltungsgeb{\"a}udes der Nachkriegsmoderne als Beitrag zur L{\"o}sung dieses Konfliktes.}, subject = {Denkmalpflege}, language = {de} } @phdthesis{Partschefeld, author = {Partschefeld, Stephan}, title = {Synthese von Fließmitteln aus St{\"a}rke und Untersuchung der Wechselwirkung mit Portlandzement}, doi = {10.25643/bauhaus-universitaet.4640}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220505-46402}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {145}, abstract = {Das Ziel dieser Arbeit war es, neuartige Fließmittel auf Basis von St{\"a}rke als nachwachsenden Rohstoff zu synthetisieren und die Wechselwirkung mit Portlandzement zu charakterisieren. Die Notwendigkeit, Alternativen zu synthetischen Zusatzmittel zu erforschen, ergibt sich aus der ben{\"o}tigten Menge zur Verarbeitung von ca. 4,1 Gt/a, wobei ca. 85 \% der Zusatzmittel auf die Fließmittel entfallen. Um Fließmittel aus St{\"a}rke zu synthetisieren, wurden drei Basisst{\"a}rken unterschiedlicher Herkunft verwendet. Es wurde eine Maniokst{\"a}rke mit einer niedrigen Molekularmasse und eine Weizenst{\"a}rke mit einer hohen Molekularmasse verwendet. Dar{\"u}ber hinaus wurde eine Kartoffelst{\"a}rke mit einer mittleren Molekularmasse, die ein Abfallprodukt der kartoffelverarbeitenden Industrie darstellt, genutzt. Die St{\"a}rkefließmittel wurden durch chemische Modifikation in einem zweistufigen Prozess synthetisiert. Im ersten Schritt wurde das Molekulargewicht der Weizen- und Kartoffelst{\"a}rke durch s{\"a}urehydrolytischen Abbau verringert. F{\"u}r die kurzkettige Maniokst{\"a}rke war eine Degradation der Molekularmasse nicht notwendig. Im zweiten Syntheseschritt wurden anionische Ladungen durch das Versetzen der degradierten St{\"a}rken und Maniokst{\"a}rke mit Natriumvinylsulfonat in die St{\"a}rkemolek{\"u}le eingef{\"u}hrt. Beurteilung der Synthesemethode zur Erzeugung von St{\"a}rkefließmitteln In diesem Zusammenhang sollten molekulare Parameter der St{\"a}rkefließmittel gezielt eingestellt werden, um eine Fließwirkung im Portlandzement zu erhalten. Insbesondere die Molekularmasse und die Menge anionischer Ladungen sollte variiert werden, um Abh{\"a}ngigkeiten mit der Dispergierleistung zu identifizieren. 1. Es konnte durch GPC-Messungen gezeigt werden, dass die Molekularmasse der langkettigen Weizenst{\"a}rke durch die gew{\"a}hlten Modifizierungsbedingungen zum s{\"a}urehydrolytischen Abbau verringert werden konnte. Durch Variation der s{\"a}urehydrolytischen Bedingungen wurden 4 degradierte Weizenst{\"a}rken erzeugt, die eine Reduzierung der Molekularmasse um 27,5 - 43 \% aufwiesen. Die Molekularmasse der Kartoffelst{\"a}rke konnte durch s{\"a}urehydrolytischen Abbau um ca. 26 \% verringert werden. 2. Durch PCD-Messungen wurde gezeigt, dass anionische Ladungen durch Sulfoethylierung der freien Hydroxylgruppen in die degradierten St{\"a}rken eingef{\"u}hrt werden konnten. Durch Variation der Dauer der Sulfoethylierung konnte die Menge der anionischen Ladungen gesteuert und gezielt variiert werden, so dass St{\"a}rkefließmittel mit steigender Ladungsmenge in folgender Reihenfolge synthetisiert wurden: W-3 < W-2 < K-1 < W¬-4 < W¬1 < M-1 Im Ergebnis der chemischen Modifizierung konnten 6 St{\"a}rkefließmittel mit variierten Molekularmassen und anionischen Ladungen erzeugt werden. Es konnte gezeigt werden, dass die Herkunft der St{\"a}rke f{\"u}r die chemische Modifizierung unerheblich ist. Die Fließmittel lagen synthesebedingt als basische, w{\"a}ssrige Suspensionen mit Wirkstoffgehalten im Bereich von 23,5 - 50 \% vor. Beurteilung der Dispergierleistung der synthetisierten St{\"a}rkefließmittel Die Dispergierperformance wurde durch rheologische Experimente mit einem Rotationsviskosimeter erfasst. Dabei wurden der Einfluss auf die Fließkurven und die Viskosit{\"a}tskurven betrachtet. Durch Vergleich der Dispergierleistung mit einem Polykondensat- und einem PCE-Fließmittel konnte eine Einordnung und Bewertung der Fließmittel vorgenommen werden. 3. Die rheologische Experimente haben gezeigt, dass die St{\"a}rkefließmittel eine vergleichbar hohe Dispergierleistung aufweisen, wie das zum Vergleich herangezogen PCE-Fließmittel. Dar{\"u}ber hinaus zeigte sich, dass die Fließwirkung der 6 St{\"a}rkefließmittel gegen{\"u}ber dem Polykondensatfließmittel deutlich h{\"o}her ist. Das aus der Literatur bekannte Einbrechen der Dispergierleistung der Polykondensat-fließmittel bei w/z-Werten < 0,4 konnte best{\"a}tigt werden. 4. Alle 6 St{\"a}rkefließmittel f{\"u}hrten zu einer Verringerung der Fließgrenze und der dynamischen Viskosit{\"a}t des Zementleimes bei einem w/z-Wert von 0,35. 5. Der Vergleich der Dispergierleistung der St{\"a}rkefließmittel untereinander zeigte, dass die anionische Ladungsmenge einen Schl{\"u}sselparameter darstellt. Die St{\"a}rkefließmittel M-1, K-1, W-1 und W-4 mit anionischen Ladungsmengen > 6 C/g zeigten die h{\"o}chste Dispergier¬performance. Die vergleichend herangezogenen klassischen Fließmittel wiesen anionische Ladungsmengen im Bereich von 1,2 C/g (Polycondensat) und 1,6 C/g (PCE) auf. Die Molekularmasse schien f{\"u}r die Dispergierleistung zun{\"a}chst unerheblich zu sein. Aus diesem Grund wurde die Basisweizenst{\"a}rke erneut chemisch modifiziert, indem anionische Ladungen eingef{\"u}hrt wurden, ohne die Molekularmasse jedoch zu verringern. Das St{\"a}rkederivat wies verdickende Eigenschaften im Zementleim auf. Daraus konnte geschlussfolgert werden, dass eine definierte Grenzmolekularmasse (150.000 Da) existiert, die unterschritten werden muss, um Fließmittel aus St{\"a}rke zu erzeugen. Des Weiteren zeigen die Ergebnisse, dass durch die chemische Modifizierung sowohl Fließmittel als auch Verdicker aus St{\"a}rke erzeugt werden k{\"o}nnen. Beurteilung der Beeinflussung der Hydratation und der Porenl{\"o}sung des Portlandzementes Aus der Literatur ist bekannt, dass Fließmittel die Hydratation von Portlandzement maßgeblich beeinflussen k{\"o}nnen. Aus diesem Grund wurden kalorimetrische und konduktometrische Untersuchungen an Zementsuspensionen, die mit den synthetisierten St{\"a}rkefließmitteln versetzt wurden, durchgef{\"u}hrt. Erg{\"a}nzt wurden die Untersuchungen durch Porenl{\"o}sungsanalysen zu verschiedenen Zeitpunkten der Hydratation. 6. Die kalorimetrischen Untersuchungen zur Beeinflussung der Hydratation des Portlandzementes zeigten, dass die dormante Periode durch die Zugabe der St{\"a}rkefließmittel z.T. erheblich verl{\"a}ngert wird. Es konnte gezeigt werden, dass, je h{\"o}her die anionische Ladungsmenge der St{\"a}rkefließmittel ist, desto l{\"a}nger dauert die dormante Periode andauert. Dar{\"u}ber hinaus zeigte sich, dass eine niedrige Molekularmasse der St{\"a}rkefließmittel die Verl{\"a}ngerung der dormanten Periode beg{\"u}nstigt. 7. Durch die konduktometrischen Untersuchungen konnte gezeigt werden, dass alle St{\"a}rkefließmittel die Dauer des freien- und diffusionskontrollierten CSH-Phasenwachstums verlangsamen. Insbesondere die Ausf{\"a}llung des Portlandits, welches mit dem Erstarrungsbeginn korreliert, erfolgt zu deutlich sp{\"a}teren Zeitpunkten. Des Weiteren korrelierten die konduktometrischen Untersuchungen mit der zeitlichen Entwicklung der Calciumkonzentration der Porenl{\"o}sungen. Der Vergleich der St{\"a}rkefließmittel untereinander zeigte, dass die Molekularmasse ein Schl{\"u}sselparameter ist. Das St{\"a}rkefließmittel M-1 mit der geringsten Molekularmasse, welches geringe Mengen kurzkettiger Anhydroglucoseeinheiten aufweist, verz{\"o}gert die Hydratphasenbildung am st{\"a}rksten. Diese Wirkung ist vergleichbar mit der von Zuckern. Dar{\"u}ber hinaus deuteten die Ergebnisse daraufhin, dass die St{\"a}rkefließmittel auf den ersten Hydratationsprodukten adsorbieren, wodurch die Hydratphasenbildung verlangsamt wird. Die kalorimetrischen und konduktometrischen Daten sowie die Ergebnisse der Porenl{\"o}sungsanalytik des Zementes, erforderten eine genauere Betrachtung der Beeinflussung der Hydratation der Klinkerphasen C3A und C3S, durch die St{\"a}rkefließmittel. Demzufolge wurden die Untersuchungen mit den Klinkerphasen C3A und C3S in Analogie zum Portlandzement durchgef{\"u}hrt. Beurteilung der Beeinflussung der Hydratation und der Porenl{\"o}sung des C3A W{\"a}hrend die kalorimetrischen Untersuchungen zur C3A-Hydratation eine Tendenz zur verlangsamten Hydratphasenbildung durch die St{\"a}rkefließmittel aufzeigten, lieferten die konduktometrischen Ergebnisse grundlegende Erkenntnisse zur Beeinflussung der C3A-Hydratation. Das Stadium I der C3A-Hydratation ist durch einen Abfall der elektrischen Leitf{\"a}higkeit gepr{\"a}gt. Dies korreliert mit dem Absinken der Calciumionenkonzentration und dem Anstieg der Aluminiumionenkonzentration in der Porenl{\"o}sung der C3A-Suspensionen. Im Anschluss an das Stadium I bildet sich ein Plateau in den elektrischen Leitf{\"a}higkeitskurven aus. 8. Es konnte gezeigt werden, dass die St{\"a}rkefließmittel das Stadium I der C3A-Hydratation, d.h. die Aufl{\"o}sung und Bildung erster Calciumaluminathydrate verlangsamen. Insbesondere die St{\"a}rkefließmittel mit h{\"o}herer Molekularmasse erh{\"o}hten die Dauer des Stadium I. Das Stadium II wird durch die St{\"a}rkefließmittel in folgender Reihenfolge am st{\"a}rksten verl{\"a}ngert: M-1 > W-3 > K-1 > W-2 ≥ W-4 und verdeutlicht, dass keine Abh{\"a}ngigkeit von der anionischen Ladungsmenge identifiziert werden konnte. Die Ergebnisse zeigten, dass speziell die kurzkettige St{\"a}rke M-1, das Stadium II l{\"a}nger aufrechterhalten. 9. Das Stadium III und IV der C3A-Hydratation wird insbesondere durch die St{\"a}rkefließmittel mit h{\"o}herer Molekularmasse verl{\"a}ngert. Die Ergebnisse der Porenl{\"o}sungsanalytik korrelieren mit den Ergebnissen der elektrischen Leitf{\"a}higkeit. Speziell die zeitlichen Verl{\"a}ufe der Calciumionenkonzentration bildeten die Verl{\"a}ufe der Konduktivit{\"a}tskurven der C3A-Hydratation mit großer {\"U}bereinstimmung ab. Beurteilung der Beeinflussung der Hydratation und der Porenl{\"o}sung des C3S Die Ergebnisse der kalorimetrischen Untersuchungen zur Beeinflussung der C3S-Hydratation durch die St{\"a}rkefließmittel zeigen, dass diese maßgeblich verlangsamt wird. Das Maximum des Haupthydratationspeaks wird zu sp{\"a}teren Zeiten verschoben und auch die H{\"o}he des Maximums wird deutlich verringert. Durch die konduktometrischen Experimente wurde aufgekl{\"a}rt, welche Stadien der C3S-Hydrataion beeinflusst wurden. 10. Es konnte gezeigt werden, dass sowohl die Menge der eingebrachten anionischen Ladungen als auch das Vorhandensein sehr kleiner St{\"a}rkefließmittelmolek{\"u}le (Zucker), Schl{\"u}sselparameter der verz{\"o}gerten Hydratationskinetik des C3S sind. Der grundlegende Mechanismus der Hydratationsverz{\"o}gerung beruht auf einer Kombination aus verminderter CSH-Keimbildung und Adsorptionsprozessen auf den ersten gebildeten CSH-Phasen der C3S-Partikel. Beurteilung des Adsorptionsverhaltens am Zement, C3A und C3S Die Bestimmung des Adsorptionsverhaltens der St{\"a}rkefließmittel erfolgte mit der Phenol-Schwefels{\"a}ure-Methode an Zement,- C3A- und C3S-Suspensionen. Durch den Vergleich der Adsorptionsraten und Adsorptionsmengen in Abh{\"a}ngigkeit von den molekularen Parametern der St{\"a}rkefließmittel wurde ein Wechselwirkungsmodell identifiziert. 11. Die Ursache f{\"u}r die hohe Dispergierleistung der St{\"a}rkefließmittel liegt in Adsorptionsprozessen an den ersten gebildeten Hydratphasen des Zementes begr{\"u}ndet. Die Molekularmasse der St{\"a}rkefließmittel ist ein Schl{\"u}sselparameter der entscheidend f{\"u}r den Mechanismus der Adsorption ist. W{\"a}hrend anionische, langkettige St{\"a}rken an mehreren Zementpartikeln gleichzeitig adsorbieren und f{\"u}r eine Vernetzung der Zementpartikel untereinander sorgen (Verdickerwirkung), adsorbieren kurzkettige anionische St{\"a}rken lediglich an den ersten gebildeten Hydratphasen der einzelnen Zementpartikel und f{\"u}hren zu elektrostatischer Abstoßung (Fließmittelwirkung). 12. Es konnte gezeigt werden, dass die St{\"a}rkefließmittel mit geringerem Molekulargewicht bei h{\"o}heren Konzentrationen an den Hydratphasen des Zementes adsorbieren. Die St{\"a}rkefließmittel mit h{\"o}herer Molekularmasse erreichen bei einer Zugabemenge von 0,7 \% ein Plateau. Daraus wird geschlussfolgert, dass die gr{\"o}ßeren Fließmittelmolek{\"u}le einen erh{\"o}hten Platzbedarf erfordern und zur Abs{\"a}ttigung der hydratisierenden Oberfl{\"a}chen bei geringeren Zugabemengen f{\"u}hren. Dar{\"u}ber hinaus konnte gezeigt werden, dass die St{\"a}rkefließmittel mit h{\"o}herer anionischer Ladungsmenge zu h{\"o}heren Adsorptionsmengen auf den Zement-, C3A- und C3S-Partikeln f{\"u}hren. 13. Die Adsorptionsprozesse finden an den ersten gebildeten Hydratphasen der C3A-Partikel statt, wodurch sowohl die Aufl{\"o}sung des C3A als auch die Bildung der Calciumhydroaluminate verlangsamt wird. Dar{\"u}ber hinaus wurde festgestellt, dass die Verlangsamung des freien- und diffusionskontrollierten Hydratphasenwachstums des C3S, durch die Adsorption der St{\"a}rkefließmittel auf den ersten gebildeten CSH-Phasen hervorgerufen wird. Des Weiteren wurde festgestellt, dass sehr kleine zucker{\"a}hnliche Molek{\"u}le in der kurzkettigen Maniokst{\"a}rke in der Lage sind, die Bildung der ersten CSH-Keime zu unterdr{\"u}cken. Dadurch kann die langanhaltende Plateauphase der elektrischen Leitf{\"a}higkeit der C3S-Hydratation erkl{\"a}rt werden. Beurteilung der Porenstruktur- und Festigkeitsausbildung Die Beurteilung der Qualit{\"a}t der Mikrostruktur erfolgte durch die Bestimmung der Rohdichte und der Porenradienverteilung mit Hilfe der Quecksilberhochdruckporosimetrie. Durch das Versetzen der Zementleime mit den St{\"a}rkefließmitteln konnten bei gleichbleibender Verarbeitbarkeit Zementsteinprobek{\"o}rper mit einem um 17,5 \% geringeren w/z-Wert von 0,35 hergestellt werden. Die Absenkung des w/z-Wertes f{\"u}hrt zu einem Anstieg der Rohdichte des Zementsteins. 14. Durch die Zugabe der St{\"a}rkefließmittel und den verringerten w/z-Wert wird die Porenstruktur der Zementsteinproben im Vergleich zum Referenzzementstein verfeinert, da die Gesamtporosit{\"a}t sinkt. Insbesondere der Kapillarporenanteil wird verringert und der Gelporenanteil erh{\"o}ht. Im Unterschied zu den PCE-Fließmitteln f{\"u}hrt die Zugabe der St{\"a}rkefließmittel zu keinem erh{\"o}hten Eintrag von Luftporen. Dies wiederum hat zur Folge, dass bei der Verwendung der St{\"a}rkefließmittel auf Entsch{\"a}umer verzichtet werden kann. 15. Entsprechend der dichteren Zementsteinmatrix wurden f{\"u}r die Zementsteine mit den St{\"a}rkefließmitteln nach 7 d und 28 d, erh{\"o}hte Biegezug- und Druckfestigkeiten ermittelt. Insbesondere die 28 d Druckfestigkeit wurde durch den verringerten w/z-Wert um die Faktoren 3,5 - 6,6 erh{\"o}ht.}, subject = {Bauchemie}, language = {de} } @book{SchneiderDonathHoelscher, author = {Schneider, Sven and Donath, Dirk and H{\"o}lscher, Christoph}, title = {Design by Research - Dokumentation eines studentischen Entwurfsprojektes}, editor = {Schneider, Sven and Donath, Dirk and H{\"o}lscher, Christoph}, doi = {10.25643/bauhaus-universitaet.2094}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20131220-20940}, pages = {170}, abstract = {Im vorliegenden Buch sind die Ergebnisse eines studentischen Entwurfsprojektes dokumentiert, welches im Wintersemester 2012/13 an der Bauhaus-Universit{\"a}t in Weimar am Lehrstuhl Informatik in der Architektur (InfAR) stattgefunden hat. Das Projekt wurde in Zusammenarbeit mit Psychologen, Kognitions- und Computerwissenschaftlern des DFG gef{\"o}rderten Forschungsprojektes SFB/TR8 „Spatial Cognition" Bremen/Freiburg konzipiert und durchgef{\"u}hrt.}, subject = {Entwurf , Psychologie , Orientierung , Methode , Architektur}, language = {mul} } @article{KoenigSchneider, author = {K{\"o}nig, Reinhard and Schneider, Sven}, title = {Nutzerinteraktion bei der computergest{\"u}tzten Generierung von Layouts}, doi = {10.25643/bauhaus-universitaet.1652}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120509-16524}, abstract = {Das vorliegende Arbeitspapier besch{\"a}ftigt sich mit der Thematik der Nutzerinteraktion bei computerbasierten generativen Systemen. Zun{\"a}chst wird erl{\"a}utert, warum es notwendig ist, den Nutzer eines solchen Systems in den Generierungsprozess zu involvieren. Darauf aufbauend werden Anforderungen an ein interaktives generatives System formuliert. Anhand eines Systems zur Generierung von Layouts werden Methoden diskutiert, um diesen Anforderungen gerecht zu werden. Es wird gezeigt, dass sich insbesondere evolution{\"a}re Algorithmen f{\"u}r ein interaktives entwurfsunterst{\"u}tzendes System eignen. Es wird kurz beschrieben, wie sich Layoutprobleme durch eine evolution{\"a}re Strategie l{\"o}sen lassen. Abschließend werden Fragen bez{\"u}glich der grafischen Darstellung von Layoutl{\"o}sungen und der Interaktion mit dem Dargestellten diskutiert.}, subject = {Interaktion}, language = {de} } @article{HijaziKoenigSchneideretal., author = {Hijazi, Ihab Hamzi and K{\"o}nig, Reinhard and Schneider, Sven and Li, Xin and Bielik, Martin and Schmitt, Gerhard and Donath, Dirk}, title = {Geostatistical Analysis for the Study of Relationships between the Emotional Responses of Urban Walkers to Urban Spaces}, series = {International Journal of E-Planning Research}, journal = {International Journal of E-Planning Research}, doi = {10.25643/bauhaus-universitaet.2602}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160622-26025}, pages = {1 -- 19}, abstract = {The described study aims to find correlations between urban spatial configurations and human emotions. To this end, the authors measured people's emotions while they walk along a path in an urban area using an instrument that measures skin conductance and skin temperature. The corresponding locations of the test persons were measured recorded by using a GPS-tracker (n=13). The results are interpreted and categorized as measures for positive and negative emotional arousal. To evaluate the technical and methodological process. The test results offer initial evidence that certain spaces or spatial sequences do cause positive or negative emotional arousal while others are relatively neutral. To achieve the goal of the study, the outcome was used as a basis for the study of testing correlations between people's emotional responses and urban spatial configurations represented by Isovist properties of the urban form. By using their model the authors can explain negative emotional arousal for certain places, but they couldn't find a model to predict emotional responses for individual spatial configurations.}, subject = {Geografie}, language = {en} } @book{KoenigSchneiderKnecht, author = {K{\"o}nig, Reinhard and Schneider, Sven and Knecht, Katja}, title = {KREMLAS: Entwicklung einer kreativen evolution{\"a}ren Entwurfsmethode f{\"u}r Layoutprobleme in Architektur und St{\"a}dtebau}, editor = {K{\"o}nig, Reinhard and Donath, Dirk and Petzold, Frank}, publisher = {Verlag der Bauhaus-Universit{\"a}t Weimar}, address = {Weimar}, isbn = {978-3-86068-471-9}, doi = {10.25643/bauhaus-universitaet.1650}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20120509-16504}, pages = {211}, abstract = {Die im vorliegenden Buch dokumentierten Untersuchungen befassen sich mit der Entwicklung von Methoden zur algorithmischen L{\"o}sung von Layoutaufgaben im architektonischen Kontext. Layout bezeichnet hier die gestalterisch und funktional sinnvolle Anordnung r{\"a}umlicher Elemente, z.B. von Parzellen, Geb{\"a}uden, R{\"a}umen auf bestimmten Maßstabsebenen. Die vorliegenden Untersuchungen sind im Rahmen eines von der Deutschen Forschungsgemeinschaft gef{\"o}rderten Forschungsprojekts entstanden.}, subject = {Grundriss}, language = {de} } @phdthesis{Wieteska, author = {Wieteska, Marcin}, title = {Untersuchungen zur Optimierung des Feuerwiderstandsverhaltens von Gipsplatten}, publisher = {Marcin Wieteska}, address = {Warszawa}, isbn = {978-83-936473-0-9}, doi = {10.25643/bauhaus-universitaet.1782}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20121207-17829}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {176}, abstract = {Die Qualit{\"a}t von Beplankungselementen wirkt sich deutlich auf den Feuerwiderstand von Metallst{\"a}nder-Wandkonstruktionen aus. Daher wurde im Rahmen dieser Arbeit der Einfluss von Zus{\"a}tzen in Gipsplatten bez{\"u}glich einer m{\"o}glichen Verbesserung dieser Eigenschaft untersucht. Zu diesem Zweck wurden spezielle, den jeweiligen Untersuchungsbedingungen angepasste Probek{\"o}rper unter Verwendung verschiedenster Zus{\"a}tze gefertigt. Die Beurteilung deren Auswirkungen erfolgte insbesondere mittels nachfolgender f{\"u}nf Kriterien: 1) dem Zeitpunkt der Temperaturerh{\"o}hung nach der Probek{\"o}rperentw{\"a}sserung, 2) dem Maximalwert der Plattenr{\"u}ckseitentemperatur, 3) der Gr{\"o}ße und der Anzahl der Risse, 4) der Plattenstabilit{\"a}t nach der W{\"a}rmebeanspruchung, 5) der Verk{\"u}rzung von prismatischen Probek{\"o}rpern. Besonders wichtig war hierbei die Charakterisierung der Auswirkungen einer simulierten Brandbeanspruchung von 970 °C {\"u}ber 90 Minuten auf Labor-Gipsplatten. Dabei wurde die Temperatur{\"a}nderung auf der Plattenr{\"u}ckseite {\"u}ber den gesamten Pr{\"u}fzeitraum kontinuierlich erfasst. Die Bewertung des Zusammenhalts der Platten nach der thermischen Beanspruchung erfolgte erstmals quantitativ {\"u}ber Anzahl und Gr{\"o}ße der an den Proben entstandenen Risse. Urs{\"a}chlich f{\"u}r die Rissbildung ist die Verringerung des Probek{\"o}rpervolumens infolge des ausgetriebenen Kristallwassers. Da dieser Parameter im Plattenversuch nicht bestimmt werden kann, wurde erg{\"a}nzend das L{\"a}ngen{\"a}nderungsverhalten von Prismen im Ergebnis einer 90min{\"u}tigen Temperung bei 1000 °C im Muffelofen ermittelt. Besonders vorteilhaft hat sich die Zugabe von 80 g/m2 Glasfasern und 7,75 \% Kalksteinmehl auf das Verhalten von Gipsplatten bei Brandbeanspruchung ausgewirkt. Diese Verbesserung ist insbesondere auf h{\"o}here Stabilit{\"a}t und geringere Schrumpfung der Gipsplatte zur{\"u}ckzuf{\"u}hren. Basierend auf den im Labormaßstab erhaltenen Ergebnissen wurden Rezepturvorschl{\"a}ge zur Verbesserung des Feuerwiderstandsverhaltens von Gipsplatten unter Praxisbedingungen entwickelt. Die Herstellung der erforderlichen großformatigen Platten erfolgte auf der Bandstraße der Knauf Gips KG. Diese Platten wurden als Wandkonstruktion mit zweilagiger Beplankung einer großtechnischen Pr{\"u}fung erfolgreich unterzogen. Eine geringere Durchbiegung der Wandkonstruktion, eine verminderte Volumenreduzierung der Platten sowie eine erh{\"o}hte Plattenstabilit{\"a}t belegen die verbesserten Eigenschaften dieser modifizierten Feuerschutzplatte. Weitere durchgef{\"u}hrte Untersuchungen ergaben, dass es unerheblich ist, ob die Platten auf Basis von Natur- oder REA-Gips bzw. mit hohem oder niedrigem Fl{\"a}chengewicht gefertigt wurden. Das eindeutig beste Ergebnis mit einer Feuerwiderstandsdauer von 118 Minuten hat eine Wandkonstruktion aus Feuerschutzplatten auf Basis eines Stuckgipses aus 100 \% REA-Gips mit einem Anteil von 83,9 g/m2 Glasfasern und 1 \% Vermiculit und einem Fl{\"a}chengewicht von 10,77 kg/m2, bei einer Plattenst{\"a}rke von 12,5 mm. Die als Ziel vorgebende Feuerwiderstandsdauer von 120 Minuten bei zweilagiger Beplankung ohne D{\"a}mmstoff k{\"o}nnte k{\"u}nftig erreicht werden, wenn es gelingt, die Volumenreduzierung noch besser zu kompensieren und die Plattenstabilit{\"a}t zu steigern. Eine M{\"o}glichkeit hierzu ist die Substitution der beidseitigen Kartonlagen durch eine Glasfaser-Vliesummantelung. Die Wandkonstruktion W112 ohne D{\"a}mmstoff erreicht dabei eine Feuerwiderstandsdauer von weit {\"u}ber 120 Minuten, wobei der Gipskern mit Glasfasern armiert ist.}, subject = {0947}, language = {de} } @phdthesis{Mueller, author = {M{\"u}ller, Matthias}, title = {Frost-Tausalz-Angriff auf Beton - Neue Erkenntnisse zum Schadensmechanismus}, doi = {10.25643/bauhaus-universitaet.4502}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210922-45025}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {226}, abstract = {F{\"u}r die Verminderung der betonspezifischen CO2-Emissionen wird ein verst{\"a}rkter Einsatz klinkerreduzierter Zemente bzw. Betone angestrebt. Die Reduzierung des Klinkergehaltes darf jedoch nicht zu einer lebensdauerrelevanten Beeintr{\"a}chtigung der Betondauerhaftigkeit f{\"u}hren. In diesem Zusammenhang stellt der Frost-Tausalz-Widerstand eine kritische Gr{\"o}ße dar, da er bei h{\"o}heren Klinkersubstitutionsraten h{\"a}ufig negativ beeinflusst wird. Erschwerend kommt hinzu, dass f{\"u}r klinkerreduzierte Betone nur ein unzureichender Erfahrungsschatz vorliegt. Ein hoher Frost-Tausalz-Widerstand kann daher nicht ausschließlich anhand deskriptiver Vorgaben gew{\"a}hrleistet werden. Demgem{\"a}ß sollte perspektivisch auch f{\"u}r frost-tausalzbeanspruchte Bauteile eine performancebasierte Lebensdauerbetrachtung erfolgen. Eine unverzichtbare Grundlage f{\"u}r das Erreichen dieser Ziele ist ein Verst{\"a}ndnis f{\"u}r die Schadensvorg{\"a}nge beim Frost-Tausalz-Angriff. Der Forschungsstand ist jedoch gepr{\"a}gt von widerspr{\"u}chlichen Schadenstheorien. Somit wurde als Zielstellung f{\"u}r diese Arbeit abgeleitet, die existierenden Schadenstheorien unter Ber{\"u}cksichtigung des aktuellen Wissensstandes zu bewerten und mit eigenen Untersuchungen zu pr{\"u}fen und einzuordnen. Die Sichtung des Forschungsstandes zeigte, dass nur zwei Theorien das Potential haben, den Frost-Tausalz-Angriff umfassend abzubilden - die Glue Spall Theorie und die Cryogenic Suction Theorie. Die Glue Spall Theorie f{\"u}hrt die Entstehung von Abwitterungen auf die mechanische Sch{\"a}digung der Betonoberfl{\"a}che durch eine anhaftende Eisschicht zur{\"u}ck. Dabei sollen nur bei moderaten Tausalzkonzentrationen in der einwirkenden L{\"o}sung kritische Spannungszust{\"a}nde in der Eisschicht auftreten, die eine Sch{\"a}digung der Betonoberfl{\"a}che hervorrufen k{\"o}nnen. In dieser Arbeit konnte jedoch nachgewiesen werden, dass starke Abwitterungen auch bei Tausalz¬konzentrationen auftreten, bei denen eine mechanische Sch{\"a}digung des Betons durch das Eis auszuschließen ist. Damit wurde die fehlende Eignung der Glue Spall Theorie aufgezeigt. Die Cryogenic Suction Theorie fußt auf den eutektischen Eigenschaften von Tausalz-l{\"o}sungen, die im gefrorenen Zustand immer als Mischung auf festem Wassereis und fl{\"u}ssiger, hochkonzentrierter Salzl{\"o}sung bestehen, solange ihre Eutektikumstemperatur nicht unter¬schritten wird. Die fl{\"u}ssige Phase im salzhaltigen Eis stellt f{\"u}r gefrorenen Beton ein bisher nicht ber{\"u}cksichtigtes Fl{\"u}ssigkeitsreservoir dar, welches trotz der hohen Salzkonzentration die Eisbildung in der Betonrandzone verst{\"a}rken und so die Entstehung von Abwitterungen verursachen soll. In dieser Arbeit wurde best{\"a}tigt, dass die Eisbildung im Zementstein beim Gefrieren in hochkonzentrierter Tausalzl{\"o}sung tats{\"a}chlich verst{\"a}rkt wird. Das Ausmaß der zus{\"a}tzlichen Eisbildung wurde dabei auch von der F{\"a}higkeit des Zementsteins zur Bindung von Chloridionen aus der Tausalzl{\"o}sung beeinflusst. Zusammenfassend wurde festgestellt, dass die Cryogenic Suction Theorie eine gute Beschreibung des Frost-Tausalz-Angriffes darstellt, aber um weitere Aspekte erg{\"a}nzt werden muss. Die Ber{\"u}cksichtigung der intensiven S{\"a}ttigung von Beton durch den Prozess der Mikroeislinsenpumpe stellt hier die wichtigste Erweiterung dar. Basierend auf dieser {\"U}berlegung wurde eine kombinierte Schadenstheorie aufgestellt. Wichtige Annahmen dieser Theorie konnten experimentell best{\"a}tigt werden. Im Ergebnis wurde so die Grundlage f{\"u}r ein tiefergehendes Verst{\"a}ndnis des Frost-Tausalz-Angriffes geschaffen. Zudem wurde ein neuer Ansatz identifiziert, um die (potentielle) Verringerung des Frost-Tausalz-Widerstandes klinkerreduzierter Betone zu erkl{\"a}ren.}, subject = {Beton}, language = {de} } @phdthesis{Fauth, author = {Fauth, Judith}, title = {Ein handlungsorientiertes Entscheidungsmodell zur Feststellung der Genehmigungsf{\"a}higkeit von Bauvorhaben}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Ilmtal-Weinstraße}, isbn = {978-3-95773-299-6}, doi = {10.25643/bauhaus-universitaet.4509}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210928-45093}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {318}, abstract = {Die Auseinandersetzung mit der Digitalisierung ist in den letzten Jahren in den Medien, auf Konferenzen und in Aussch{\"u}ssen der Bau- und Immobilienbranche angekommen. W{\"a}hrend manche Bereiche Neuerungen hervorbringen und einige Akteure als Pioniere zu bezeichnen sind, weisen andere Themen noch Defizite hinsichtlich der digitalen Transformation auf. Zu dieser Kategorie kann auch das Baugenehmigungsverfahren gez{\"a}hlt werden. Unabh{\"a}ngig davon, wie Architekten und Ingenieure in den Planungsb{\"u}ros auf innovative Methoden setzen, bleiben die Bauvorlagen bisher zuhauf in Papierform oder werden nach der elektronischen Einreichung in der Beh{\"o}rde ausgedruckt. Vorhandene Ressourcen, beispielsweise in Form eines Bauwerksinformationsmodells, die Unterst{\"u}tzung bei der Baugenehmigungsfeststellung bieten k{\"o}nnen, werden nicht ausgesch{\"o}pft. Um mit digitalen Werkzeugen eine Entscheidungshilfe f{\"u}r die Baugenehmigungsbeh{\"o}rden zu erarbeiten, ist es notwendig, den Ist-Zustand zu verstehen und Gegebenheiten zu hinterfragen, bevor eine Gesamtautomatisierung der innerbeh{\"o}rdlichen Vorg{\"a}nge als alleinige L{\"o}sung zu verfolgen ist. Mit einer inhaltlich-organisatorischen Betrachtung der relevanten Bereiche, die Einfluss auf die Baugenehmigungsfeststellung nehmen, wird eine Optimierung des Baugenehmigungsverfahrens in den Beh{\"o}rden angestrebt. Es werden die komplexen Bereiche, wie die Gesetzeslage, der Einsatz von Technologie aber auch die subjektiven Handlungsalternativen, ermittelt und strukturiert. Mit der Entwicklung eines Modells zur Feststellung der Baugenehmigungsf{\"a}higkeit wird sowohl ein Verst{\"a}ndnis f{\"u}r Einflussfaktoren vermittelt als auch eine Transparenzsteigerung f{\"u}r alle Beteiligten geschaffen. Neben einer internationalen Literaturrecherche diente eine empirische Studie als Untersuchungsmethode. Die empirische Studie wurde in Form von qualitativen Experteninterviews durchgef{\"u}hrt, um den Ist-Zustand im Bereich der Baugenehmigungsverfahren festzustellen. Das erhobene Datenmaterial wurde aufbereitet und anschließend einer softwaregest{\"u}tzten Inhaltsanalyse unterzogen. Die Ergebnisse wurden in Kombination mit den Erkenntnissen der Literaturrecherche in verschiedenen Analysen als Modellgrundlage aufgearbeitet. Ergebnis der Untersuchung stellt ein Entscheidungsmodell dar, welches eine L{\"u}cke zwischen den gegenw{\"a}rtigen Abl{\"a}ufen in den Baubeh{\"o}rden und einer Gesamtautomatisierung der Baugenehmigungspr{\"u}fung schließt. Die prozessorientierte Strukturierung entscheidungsrelevanter Sachverhalte im Modell erm{\"o}glicht eine Unterst{\"u}tzung bei der Baugenehmigungsfeststellung f{\"u}r Pr{\"u}fer und Antragsteller. Das theoretische Modell konnte in Form einer Webanwendung in die Praxis {\"u}bertragen werden.}, subject = {Baugenehmigung}, language = {de} } @phdthesis{Hoerold, author = {H{\"o}rold, Stefan}, title = {Leistungsbezogene Musterjahresganglinien f{\"u}r den Straßenbetriebsdienst}, doi = {10.25643/bauhaus-universitaet.4491}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210830-44910}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {124}, abstract = {In den letzten Jahrzehnten unterlag der Straßenbetriebsdienst tiefgreifenden Ver{\"a}nderungen. Diese Ver{\"a}nderungen schließt auch die betriebliche Steuerungsphilosophie ein, um eine planungsrationale und {\"o}konomische Gestaltung des Straßenbetriebsdienstes zu unterst{\"u}tzen. Dabei erfolgt eine verbindliche Vorgabe der Leistungsinhalte und -umf{\"a}nge und erm{\"o}glicht eine Budgetierung f{\"u}r das vorgesehene Jahresarbeitsprogramm. Ziel der Untersuchung ist die Entwicklung eines Modells f{\"u}r die Ermittlung von leistungsbezogenen Musterjahresganglinien zur Unterst{\"u}tzung der Jahresarbeitsplanung. Daf{\"u}r lagen f{\"u}r jede Leistung des Leistungsbereiches „Gr{\"u}npflege" jeweils 260 einzelne Jahresganglinien vor. Im Ergebnis der Untersuchung wird die leistungsbezogene Musterjahresganglinie in vier Schritten ermittelt. Im ersten Schritt erfolgt die Pr{\"u}fung der Datenqualit{\"a}t; im zweiten Schritt eine Korrelationsanalyse; im dritten Schritt die fachliche {\"U}berpr{\"u}fung der Leistungsauspr{\"a}gung und im vierten Schritt die Ermittlung der leistungsbezogenen Musterjahresganglinie aus den verbliebenen leistungsbezogenen Jahresganglinien.}, subject = {Straßenbetriebsdienst}, language = {de} } @phdthesis{Fauth, author = {Fauth, Judith}, title = {A process-oriented decision model for determining the permitability of construction projects}, doi = {10.25643/bauhaus-universitaet.4602}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220309-46020}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {325}, abstract = {In recent years, the discussion of digitalization has arrived in the media, at conferences, and in committees of the construction and real estate industry. While some areas are producing innovations and some contributors can be described as pioneers, other topics still show deficits with regard to digital transformation. The building permit process can also be counted in this category. Regardless of how architects and engineers in planning offices rely on innovative methods, building documents have so far remained in paper form in too many cases, or are printed out after electronic submission to the authority. Existing resources - for example in the form of a building information model, which could provide support in the building permit process - are not being taken advantage of. In order to use digital tools to support decision-making by the building permit authorities, it is necessary to understand the current situation and to question conditions before pursuing the overall automation of internal authority processes as the sole solution. With a substantive-organizational consideration of the relevant areas that influence building permit determination, an improvement of the building permit procedure within authorities is proposed. Complex areas - such as legal situations, the use of technology, as well as the subjective alternative action - are determined and structured. With the development of a model for the determination of building permitability, both an understanding of influencing factors is conveyed and an increase in transparency for all parties involved is created. In addition to an international literature review, an empirical study served as the research method. The empirical study was conducted in the form of qualitative expert interviews in order to determine the current state in the field of building permit procedures. The collected data material was processed and subsequently subjected to a software-supported content analysis. The results were processed, in combination with findings from the literature review, in various analyses to form the basis for a proposed model. The result of the study is a decision model that closes the gap between the current processes within the building authorities and an overall automation of the building permit review process. The model offers support to examiners and applicants in determining building permit eligibility, through its process-oriented structuring of decision-relevant facts. The theoretical model could be transferred into practice in the form of a web application.}, subject = {Baugenehmigung}, language = {en} } @phdthesis{Jaouadi, author = {Jaouadi, Zouhour}, title = {Pareto and Reliability-Oriented Aeroelastic Shape Optimization of Bridge Decks}, doi = {10.25643/bauhaus-universitaet.4935}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20230303-49352}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {167}, abstract = {Due to the development of new technologies and materials, optimized bridge design has recently gained more attention. The aim is to reduce the bridge components materials and the CO2 emission from the cement manufacturing process. Thus, most long-span bridges are designed to be with high flexibility, low structural damping, and longer and slender spans. Such designs lead, however, to aeroelastic challenges. Moreover, the consideration of both the structural and aeroelastic behavior in bridges leads to contradictory solutions as the structural constraints lead to deck prototypes with high depth which provide high inertia to material volume ratios. On the other hand, considering solely the aerodynamic requirements, slender airfoil-shaped bridge box girders are recommended since they prevent vortex shedding and exhibit minimum drag. Within this framework comes this study which provides approaches to find optimal bridge deck cross-sections while considering the aerodynamic effects. Shape optimization of deck cross-section is usually formulated to minimize the amount of material by finding adequate parameters such as the depth, the height, and the thickness and while ensuring the overall stability of the structure by the application of some constraints. Codes and studies have been implemented to analyze the wind phenomena and the structural responses towards bridge deck cross-sections where simplifications have been adopted due to the complexity and the uniqueness of such components besides the difficulty of obtaining a final model of the aerodynamic behavior. In this thesis, two main perspectives have been studied; the first is fully deterministic and presents a novel framework on generating optimal aerodynamic shapes for streamlined and trapezoidal cross-sections based on the meta-modeling approach. Single and multi-objective optimizations were both carried out and a Pareto Front is generated. The performance of the optimal designs is checked afterwards. In the second part, a new strategy based on Reliability-Based Design Optimization (RBDO) to mitigate the vortex-induced vibration (VIV) on the Trans-Tokyo Bay bridge is proposed. Small changes in the leading and trailing edges are presented and uncertainties are considered in the structural system. Probabilistic constraints based on polynomial regression are evaluated and the problem is solved while applying the Reliability Index Approach (RIA) and the Performance Measure Approach (PMA). The results obtained in the first part showed that the aspect ratio has a significant effect on the aerodynamic behavior where deeper cross-sections have lower resistance against flutter and should be avoided. In the second part, the adopted RBDO approach succeeded to mitigate the VIV, and it is proven that designs with narrow or prolonged bottom-base length and featuring an abrupt surface change in the leading and trailing edges can lead to high vertical vibration amplitude. It is expected that this research will help engineers with the selections of the adequate deck cross-section layout, and encourage researchers to apply concepts of optimization regarding this field and develop the presented approaches for further studies.}, subject = {Gestaltoptimierung}, language = {en} } @phdthesis{Alkam, author = {Alkam, Feras}, title = {Vibration-based Monitoring of Concrete Catenary Poles using Bayesian Inference}, volume = {2021}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.4433}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210526-44338}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {177}, abstract = {This work presents a robust status monitoring approach for detecting damage in cantilever structures based on logistic functions. Also, a stochastic damage identification approach based on changes of eigenfrequencies is proposed. The proposed algorithms are verified using catenary poles of electrified railways track. The proposed damage features overcome the limitation of frequency-based damage identification methods available in the literature, which are valid to detect damage in structures to Level 1 only. Changes in eigenfrequencies of cantilever structures are enough to identify possible local damage at Level 3, i.e., to cover damage detection, localization, and quantification. The proposed algorithms identified the damage with relatively small errors, even at a high noise level.}, subject = {Parameteridentifikation}, language = {en} } @phdthesis{Bianco, author = {Bianco, Marcelo Jos{\´e}}, title = {Coupling between Shell and Generalized Beam Theory (GBT) elements}, doi = {10.25643/bauhaus-universitaet.4391}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210315-43914}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {265}, abstract = {In the last decades, Finite Element Method has become the main method in statics and dynamics analysis in engineering practice. For current problems, this method provides a faster, more flexible solution than the analytic approach. Prognoses of complex engineer problems that used to be almost impossible to solve are now feasible. Although the finite element method is a robust tool, it leads to new questions about engineering solutions. Among these new problems, it is possible to divide into two major groups: the first group is regarding computer performance; the second one is related to understanding the digital solution. Simultaneously with the development of the finite element method for numerical solutions, a theory between beam theory and shell theory was developed: Generalized Beam Theory, GBT. This theory has not only a systematic and analytical clear presentation of complicated structural problems, but also a compact and elegant calculation approach that can improve computer performance. Regrettably, GBT was not internationally known since the most publications of this theory were written in German, especially in the first years. Only in recent years, GBT has gradually become a fertile research topic, with developments from linear to non-linear analysis. Another reason for the misuse of GBT is the isolated application of the theory. Although recently researches apply finite element method to solve the GBT's problems numerically, the coupling between finite elements of GBT and other theories (shell, solid, etc) is not the subject of previous research. Thus, the main goal of this dissertation is the coupling between GBT and shell/membrane elements. Consequently, one achieves the benefits of both sides: the versatility of shell elements with the high performance of GBT elements. Based on the assumptions of GBT, this dissertation presents how the separation of variables leads to two calculation's domains of a beam structure: a cross-section modal analysis and the longitudinal amplification axis. Therefore, there is the possibility of applying the finite element method not only in the cross-section analysis, but also the development for an exact GBT's finite element in the longitudinal direction. For the cross-section analysis, this dissertation presents the solution of the quadratic eigenvalue problem with an original separation between plate and membrane mechanism. Subsequently, one obtains a clearer representation of the deformation mode, as well as a reduced quadratic eigenvalue problem. Concerning the longitudinal direction, this dissertation develops the novel exact elements, based on hyperbolic and trigonometric shape functions. Although these functions do not have trivial expressions, they provide a recursive procedure that allows periodic derivatives to systematise the development of stiffness matrices. Also, these shape functions enable a single-element discretisation of the beam structure and ensure a smooth stress field. From these developments, this dissertation achieves the formulation of its primary objective: the connection of GBT and shell elements in a mixed model. Based on the displacement field, it is possible to define the coupling equations applied in the master-slave method. Therefore, one can model the structural connections and joints with finite shell elements and the structural beams and columns with GBT finite element. As a side effect, the coupling equations limit the displacement field of the shell elements under the assumptions of GBT, in particular in the neighbourhood of the coupling cross-section. Although these side effects are almost unnoticeable in linear analysis, they lead to cumulative errors in non-linear analysis. Therefore, this thesis finishes with the evaluation of the mixed GBT-shell models in non-linear analysis.}, subject = {Biegetheorie}, language = {en} } @article{StaubachMachacekSkowroneketal.2020, author = {Staubach, Patrick and Machacek, Jan and Skowronek, Josefine and Wichtmann, Torsten}, title = {Vibratory pile driving in water-saturated sand: Back-analysis of model tests using a hydro-mechanically coupled CEL method}, series = {Soils and Foundations}, volume = {2021}, journal = {Soils and Foundations}, number = {Volume 61, Issue 1}, publisher = {Elsevier, Science Direct}, address = {Amsterdam}, doi = {10.1016/j.sandf.2020.11.005}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210203-43571}, pages = {144 -- 159}, year = {2020}, abstract = {The development of a hydro-mechanically coupled Coupled-Eulerian-Lagrangian (CEL) method and its application to the back-analysisof vibratory pile driving model tests in water-saturated sand is presented. The predicted pile penetration using this approachis in good agreement with the results of the model tests as well as with fully Lagrangian simulations. In terms of pore water pressure, however, the results of the CEL simulation show a slightly worse accordance with the model tests compared to the Lagrangian simulation. Some shortcomings of the hydro-mechanically coupled CEL method in case of frictional contact problems and pore fluids with high bulk modulus are discussed. Lastly, the CEL method is applied to the simulation of vibratory driving of open-profile piles under partially drained conditions to study installation-induced changes in the soil state. It is concluded that the proposed method is capable of realistically reproducing the most important mechanisms in the soil during the driving process despite its addressed shortcomings.}, subject = {Plastische Deformation}, language = {en} } @phdthesis{Reshetnikova, author = {Reshetnikova, Tatiana}, title = {Transformation of the Environment: Influence of "Urban Reagents." German and Russian Case Studies}, doi = {10.25643/bauhaus-universitaet.4351}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210128-43517}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {256 (thesis) + 23 (Folder) + 83 (CD)}, abstract = {An urban regeneration manifests itself through urban objects operating as change agents. The en-tailed diverse effects on the surroundings demonstrate experimental origin - an experiment as a preplanned but unpredictable method. An understanding of influences and features of urban ob-jects requires scrutiny due to a high potential of the elements to force an alteration and reactions. This dissertation explores the transformation of the milieu and mechanisms of this transformation.}, subject = {Stadtentwicklung}, language = {en} } @article{LashkarAraKalantariSheikhKhozanietal., author = {Lashkar-Ara, Babak and Kalantari, Niloofar and Sheikh Khozani, Zohreh and Mosavi, Amir}, title = {Assessing Machine Learning versus a Mathematical Model to Estimate the Transverse Shear Stress Distribution in a Rectangular Channel}, series = {Mathematics}, volume = {2021}, journal = {Mathematics}, number = {Volume 9, Issue 6, Article 596}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/math9060596}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210504-44197}, pages = {15}, abstract = {One of the most important subjects of hydraulic engineering is the reliable estimation of the transverse distribution in the rectangular channel of bed and wall shear stresses. This study makes use of the Tsallis entropy, genetic programming (GP) and adaptive neuro-fuzzy inference system (ANFIS) methods to assess the shear stress distribution (SSD) in the rectangular channel. To evaluate the results of the Tsallis entropy, GP and ANFIS models, laboratory observations were used in which shear stress was measured using an optimized Preston tube. This is then used to measure the SSD in various aspect ratios in the rectangular channel. To investigate the shear stress percentage, 10 data series with a total of 112 different data for were used. The results of the sensitivity analysis show that the most influential parameter for the SSD in smooth rectangular channel is the dimensionless parameter B/H, Where the transverse coordinate is B, and the flow depth is H. With the parameters (b/B), (B/H) for the bed and (z/H), (B/H) for the wall as inputs, the modeling of the GP was better than the other one. Based on the analysis, it can be concluded that the use of GP and ANFIS algorithms is more effective in estimating shear stress in smooth rectangular channels than the Tsallis entropy-based equations.}, subject = {Maschinelles Lernen}, language = {en} } @phdthesis{Sproete, author = {Spr{\"o}te, Daniel}, title = {Immobilienportfoliomanagement {\"o}ffentlicher musealer Schl{\"o}sserverwaltungen - Daten zur Investitionssteuerung}, doi = {10.25643/bauhaus-universitaet.4426}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210510-44260}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {220}, abstract = {Die Arbeit leistet einen wissenschaftlichen Beitrag zur Erforschung der Einsatzm{\"o}glichkeiten eines Immobilienportfoliomanagements f{\"u}r {\"o}ffentliche museale Schl{\"o}sserverwaltungen in Deutschland. Insbesondere wird ein f{\"u}r deren Organisation spezifisches Modell zur Investitionssteuerung herausgearbeitet und dessen Anwendbarkeit in der Praxis mit Experten diskutiert.}, subject = {Unbewegliche Sache}, language = {de} } @misc{Schuster, author = {Schuster, Lara}, title = {Die Haltungen des Architekten Luigi Snozzi. Untersucht am Beispiel des Projektes Monte Carasso}, volume = {2021}, publisher = {Lucia Verlag}, address = {Weimar}, doi = {10.25643/bauhaus-universitaet.4438}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210603-44386}, pages = {17}, abstract = {Welche Haltung spricht aus den Werken von Architekt*innen? Lassen sich Werte und Handlungsanweisungen von Mauern und Pl{\"a}nen ablesen? Luigi Snozzis Entw{\"u}rfe f{\"u}r Monte Carasso werden in dieser Arbeit exemplarisch darauf untersucht. Sie zeugen von der Verantwortung, die jede*r Architekt*in f{\"u}r das Umfeld hat, in dem sie oder er baut.}, subject = {Architektur}, language = {de} } @article{HarirchianKumariJadhavetal., author = {Harirchian, Ehsan and Kumari, Vandana and Jadhav, Kirti and Raj Das, Rohan and Rasulzade, Shahla and Lahmer, Tom}, title = {A Machine Learning Framework for Assessing Seismic Hazard Safety of Reinforced Concrete Buildings}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 20, article 7153}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10207153}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20201022-42744}, pages = {18}, abstract = {Although averting a seismic disturbance and its physical, social, and economic disruption is practically impossible, using the advancements in computational science and numerical modeling shall equip humanity to predict its severity, understand the outcomes, and equip for post-disaster management. Many buildings exist amidst the developed metropolitan areas, which are senile and still in service. These buildings were also designed before establishing national seismic codes or without the introduction of construction regulations. In that case, risk reduction is significant for developing alternatives and designing suitable models to enhance the existing structure's performance. Such models will be able to classify risks and casualties related to possible earthquakes through emergency preparation. Thus, it is crucial to recognize structures that are susceptible to earthquake vibrations and need to be prioritized for retrofitting. However, each building's behavior under seismic actions cannot be studied through performing structural analysis, as it might be unrealistic because of the rigorous computations, long period, and substantial expenditure. Therefore, it calls for a simple, reliable, and accurate process known as Rapid Visual Screening (RVS), which serves as a primary screening platform, including an optimum number of seismic parameters and predetermined performance damage conditions for structures. In this study, the damage classification technique was studied, and the efficacy of the Machine Learning (ML) method in damage prediction via a Support Vector Machine (SVM) model was explored. The ML model is trained and tested separately on damage data from four different earthquakes, namely Ecuador, Haiti, Nepal, and South Korea. Each dataset consists of varying numbers of input data and eight performance modifiers. Based on the study and the results, the ML model using SVM classifies the given input data into the belonging classes and accomplishes the performance on hazard safety evaluation of buildings.}, subject = {Erdbeben}, language = {en} } @phdthesis{Kavrakov, author = {Kavrakov, Igor}, title = {Synergistic Framework for Analysis and Model Assessment in Bridge Aerodynamics and Aeroelasticity}, publisher = {Bauhaus-Universit{\"a}tsverlag}, address = {Weimar}, isbn = {978-3-95773-284-2}, doi = {10.25643/bauhaus-universitaet.4109}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200316-41099}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {314}, abstract = {Wind-induced vibrations often represent a major design criterion for long-span bridges. This work deals with the assessment and development of models for aerodynamic and aeroelastic analyses of long-span bridges. Computational Fluid Dynamics (CFD) and semi-analytical aerodynamic models are employed to compute the bridge response due to both turbulent and laminar free-stream. For the assessment of these models, a comparative methodology is developed that consists of two steps, a qualitative and a quantitative one. The first, qualitative, step involves an extension of an existing approach based on Category Theory and its application to the field of bridge aerodynamics. Initially, the approach is extended to consider model comparability and completeness. Then, the complexity of the CFD and twelve semi-analytical models are evaluated based on their mathematical constructions, yielding a diagrammatic representation of model quality. In the second, quantitative, step of the comparative methodology, the discrepancy of a system response quantity for time-dependent aerodynamic models is quantified using comparison metrics for time-histories. Nine metrics are established on a uniform basis to quantify the discrepancies in local and global signal features that are of interest in bridge aerodynamics. These signal features involve quantities such as phase, time-varying frequency and magnitude content, probability density, non-stationarity, and nonlinearity. The two-dimensional (2D) Vortex Particle Method is used for the discretization of the Navier-Stokes equations including a Pseudo-three dimensional (Pseudo-3D) extension within an existing CFD solver. The Pseudo-3D Vortex Method considers the 3D structural behavior for aeroelastic analyses by positioning 2D fluid strips along a line-like structure. A novel turbulent Pseudo-3D Vortex Method is developed by combining the laminar Pseudo-3D VPM and a previously developed 2D method for the generation of free-stream turbulence. Using analytical derivations, it is shown that the fluid velocity correlation is maintained between the CFD strips. Furthermore, a new method is presented for the determination of the complex aerodynamic admittance under deterministic sinusoidal gusts using the Vortex Particle Method. The sinusoidal gusts are simulated by modeling the wakes of flapping airfoils in the CFD domain with inflow vortex particles. Positioning a section downstream yields sinusoidal forces that are used for determining all six components of the complex aerodynamic admittance. A closed-form analytical relation is derived, based on an existing analytical model. With this relation, the inflow particles' strength can be related with the target gust amplitudes a priori. The developed methodologies are combined in a synergistic framework, which is applied to both fundamental examples and practical case studies. Where possible, the results are verified and validated. The outcome of this work is intended to shed some light on the complex wind-bridge interaction and suggest appropriate modeling strategies for an enhanced design.}, subject = {Br{\"u}cke}, language = {en} } @misc{Rauch2008, type = {Master Thesis}, author = {Rauch, Kristin}, title = {Simulation - Termincontrolling beim Bau einer Br{\"u}ckenkappe}, doi = {10.25643/bauhaus-universitaet.1362}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20081111-14414}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2008}, abstract = {Die Simulation ist vor allem in der Forschung und Wissenschaft ein bekanntes Ver-fahren zur Untersuchung von dynamischen Prozessen. Fachgebiete wie u.a. die Medizin und Biologie, das Verkehrswesen, die Automobilindustrie, die Meteorologie und die Fertigungstechnik gewinnen neue Erkenntnisse aus dem Einsatz derartiger Analyseverfahren. Gr{\"u}nde f{\"u}r die Anwendung von Computersimulationen erstrecken sich von finanziellen und zeitlichen Aspekten {\"u}ber eine Risikoverringerung bis hin zu einer vereinfachten Vorgehensweise. Nicht in allen Bereichen aber werden die viel-seitigen Vorteile von Simulationsmethoden genutzt. In der Baubranche wird Simulation derzeit nur ansatzweise eingesetzt. Doch vor al-lem Baustellen bieten durch den zunehmenden Kosten- und Termindruck sowie viel-seitige andere Einfl{\"u}sse eine gute Basis f{\"u}r die Anwendung von Simulationsmetho-den. Der Bauablauf kann dadurch besser kontrolliert und gesteuert werden. In der Planungsphase von Bauprojekten wird Simulation bereits in Grundz{\"u}gen f{\"u}r die Op-timierung von Bauablauf- und Logistikprozessen genutzt. Allerdings ist besonders die Ausf{\"u}hrungsphase durch St{\"o}rungen und {\"A}nderungen gepr{\"a}gt, sodass hier Simu-lationsmethoden noch effektiver eingesetzt werden k{\"o}nnen. Im Rahmen dieser Arbeit sollen die Einsatzm{\"o}glichkeiten von Simulationsmethoden f{\"u}r die Optimierung des Termincontrollings untersucht werden. Durch das Aufzeigen verschiedener Methoden sowie einem Vergleich {\"u}ber ihre Vor- und Nachteile wird herausgefiltert, welches Simulationswerkzeug am effektivsten im Termincontrolling eingesetzt werden kann. Ein weiteres Ziel dieser Arbeit ist die Modellierung eines Beispielprozesses anhand eines ausgew{\"a}hlten Simulationsverfahrens. Die Herstellung einer Br{\"u}ckenkappe wird in diesem Zusammenhang umfangreich dargestellt und analysiert. Eventuelle Zwangspunkte bei der Umsetzung und verschiedene L{\"o}sungsm{\"o}glichkeiten werden aufgezeigt.}, subject = {Simulation}, language = {de} } @article{HarirchianJadhavMohammadetal., author = {Harirchian, Ehsan and Jadhav, Kirti and Mohammad, Kifaytullah and Aghakouchaki Hosseini, Seyed Ehsan and Lahmer, Tom}, title = {A Comparative Study of MCDM Methods Integrated with Rapid Visual Seismic Vulnerability Assessment of Existing RC Structures}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 18, article 6411}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10186411}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200918-42360}, pages = {24}, abstract = {Recently, the demand for residence and usage of urban infrastructure has been increased, thereby resulting in the elevation of risk levels of human lives over natural calamities. The occupancy demand has rapidly increased the construction rate, whereas the inadequate design of structures prone to more vulnerability. Buildings constructed before the development of seismic codes have an additional susceptibility to earthquake vibrations. The structural collapse causes an economic loss as well as setbacks for human lives. An application of different theoretical methods to analyze the structural behavior is expensive and time-consuming. Therefore, introducing a rapid vulnerability assessment method to check structural performances is necessary for future developments. The process, as mentioned earlier, is known as Rapid Visual Screening (RVS). This technique has been generated to identify, inventory, and screen structures that are potentially hazardous. Sometimes, poor construction quality does not provide some of the required parameters; in this case, the RVS process turns into a tedious scenario. Hence, to tackle such a situation, multiple-criteria decision-making (MCDM) methods for the seismic vulnerability assessment opens a new gateway. The different parameters required by RVS can be taken in MCDM. MCDM evaluates multiple conflicting criteria in decision making in several fields. This paper has aimed to bridge the gap between RVS and MCDM. Furthermore, to define the correlation between these techniques, implementation of the methodologies from Indian, Turkish, and Federal Emergency Management Agency (FEMA) codes has been done. The effects of seismic vulnerability of structures have been observed and compared.}, subject = {Erdbebensicherheit}, language = {en} } @phdthesis{Oucif, author = {Oucif, Chahmi}, title = {Analytical Modeling of Self-Healing and Super Healing in Cementitious Materials}, doi = {10.25643/bauhaus-universitaet.4229}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200831-42296}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {208}, abstract = {Self-healing materials have recently become more popular due to their capability to autonomously and autogenously repair the damage in cementitious materials. The concept of self-healing gives the damaged material the ability to recover its stiffness. This gives a difference in comparing with a material that is not subjected to healing. Once this material is damaged, it cannot sustain loading due to the stiffness degradation. Numerical modeling of self-healing materials is still in its infancy. Multiple experimental researches were conducted in literature to describe the behavior of self-healing of cementitious materials. However, few numerical investigations were undertaken. The thesis presents an analytical framework of self-healing and super healing materials based on continuum damage-healing mechanics. Through this framework, we aim to describe the recovery and strengthening of material stiffness and strength. A simple damage healing law is proposed and applied on concrete material. The proposed damage-healing law is based on a new time-dependent healing variable. The damage-healing model is applied on isotropic concrete material at the macroscale under tensile load. Both autonomous and autogenous self-healing mechanisms are simulated under different loading conditions. These two mechanisms are denoted in the present work by coupled and uncoupled self-healing mechanisms, respectively. We assume in the coupled self-healing that the healing occurs at the same time with damage evolution, while we assume in the uncoupled self-healing that the healing occurs when the material is deformed and subjected to a rest period (damage is constant). In order to describe both coupled and uncoupled healing mechanisms, a one-dimensional element is subjected to different types of loading history. In the same context, derivation of nonlinear self-healing theory is given, and comparison of linear and nonlinear damage-healing models is carried out using both coupled and uncoupled self-healing mechanisms. The nonlinear healing theory includes generalized nonlinear and quadratic healing models. The healing efficiency is studied by varying the values of the healing rest period and the parameter describing the material characteristics. In addition, theoretical formulation of different self-healing variables is presented for both isotropic and anisotropic maerials. The healing variables are defined based on the recovery in elastic modulus, shear modulus, Poisson's ratio, and bulk modulus. The evolution of the healing variable calculated based on cross-section as function of the healing variable calculated based on elastic stiffness is presented in both hypotheses of elastic strain equivalence and elastic energy equivalence. The components of the fourth-rank healing tensor are also obtained in the case of isotropic elasticity, plane stress and plane strain. Recent research revealed that self-healing presents a crucial solution also for the strengthening of the materials. This new concept has been termed ``Super Healing``. Once the stiffness of the material is recovered, further healing can result as a strengthening material. In the present thesis, new theory of super healing materials is defined in isotropic and anisotropic cases using sound mathematical and mechanical principles which are applied in linear and nonlinear super healing theories. Additionally, the link of the proposed theory with the theory of undamageable materials is outlined. In order to describe the super healing efficiency in linear and nonlinear theories, the ratio of effective stress to nominal stress is calculated as function of the super healing variable. In addition, the hypotheses of elastic strain and elastic energy equivalence are applied. In the same context, new super healing matrix in plane strain is proposed based on continuum damage-healing mechanics. In the present work, we also focus on numerical modeling of impact behavior of reinforced concrete slabs using the commercial finite element package Abaqus/Explicit. Plain and reinforced concrete slabs of unconfined compressive strength 41 MPa are simulated under impact of ogive-nosed hard projectile. The constitutive material modeling of the concrete and steel reinforcement bars is performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. Damage diameters and residual velocities obtained by the numerical model are compared with the experimental results and effect of steel reinforcement and projectile diameter is studied.}, subject = {Schaden}, language = {en} }