@article{FaizollahzadehArdabiliNajafiAlizamiretal.,
  author    = {Faizollahzadeh Ardabili, Sina and Najafi, Bahman and Alizamir, Meysam and Mosavi, Amir and Shamshirband, Shahaboddin and Rabczuk, Timon},
  title     = {Using SVM-RSM and ELM-RSM Approaches for Optimizing the Production Process of Methyl and Ethyl Esters},
  series = {Energies},
  journal   = {Energies},
  number    = {11, 2889},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/en11112889},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181025-38170},
  pages     = {1 -- 20},
  abstract  = {The production of a desired product needs an effective use of the experimental model. The present study proposes an extreme learning machine (ELM) and a support vector machine (SVM) integrated with the response surface methodology (RSM) to solve the complexity in optimization and prediction of the ethyl ester and methyl ester production process. The novel hybrid models of ELM-RSM and ELM-SVM are further used as a case study to estimate the yield of methyl and ethyl esters through a trans-esterification process from waste cooking oil (WCO) based on American Society for Testing and Materials (ASTM) standards. The results of the prediction phase were also compared with artificial neural networks (ANNs) and adaptive neuro-fuzzy inference system (ANFIS), which were recently developed by the second author of this study. Based on the results, an ELM with a correlation coefficient of 0.9815 and 0.9863 for methyl and ethyl esters, respectively, had a high estimation capability compared with that for SVM, ANNs, and ANFIS. Accordingly, the maximum production yield was obtained in the case of using ELM-RSM of 96.86\% for ethyl ester at a temperature of 68.48 °C, a catalyst value of 1.15 wt. \%, mixing intensity of 650.07 rpm, and an alcohol to oil molar ratio (A/O) of 5.77; for methyl ester, the production yield was 98.46\% at a temperature of 67.62 °C, a catalyst value of 1.1 wt. \%, mixing intensity of 709.42 rpm, and an A/O of 6.09. Therefore, ELM-RSM increased the production yield by 3.6\% for ethyl ester and 3.1\% for methyl ester, compared with those for the experimental data.},
  subject      = {Biodiesel},
  language  = {en}
}
@unpublished{MosaviMoeiniAhmadpouretal.,
  author    = {Mosavi, Amir and Moeini, Iman and Ahmadpour, Mohammad and Alharbi, Naif and E. Gorji, Nima},
  title     = {Modeling the time-dependent characteristics of perovskite solar cells},
  doi       = {10.25643/bauhaus-universitaet.3757},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180907-37573},
  abstract  = {We proposed two different time-dependent modeling approaches for variation of device characteristics of perovskite solar cells under stress conditions. The first approach follows Sah-Noyce-Shockley (SNS) model based on Shockley-Read-Hall recombination/generation across the depletion width of pn junction and the second approach is based on thermionic emission model for Schottky diodes. The connecting point of these approaches to time variation is the time-dependent defect generation in depletion width (W) of the junction. We have fitted the two models with experimental data reported in the literature to perovskite solar cell and found out that each model has a superior explanation for degradation of device metrics e.g. current density and efficiency by time under stress conditions. Nevertheless, the Sah-Noyce-Shockley model is more reliable than thermionic emission at least for solar cells.},
  subject      = {Solarzelle},
  language  = {en}
}