@article{Lahmer,
  author    = {Lahmer, Tom},
  title     = {FEM-Based determination of real and complex elastic, dielectric, and piezoelectric moduli in piezoceramic materials},
  series = {IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control},
  journal   = {IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control},
  doi       = {10.25643/bauhaus-universitaet.3608},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20171030-36083},
  abstract  = {We propose an enhanced iterative scheme for the precise reconstruction of piezoelectric material parameters from electric impedance and mechanical displacement measurements. It is based on finite-element simulations of the full three-dimensional piezoelectric equations, combined with an inexact Newton or nonlinear Landweber iterative inversion scheme. We apply our method to two piezoelectric materials and test its performance. For the first material, the manufacturer provides a full data set; for the second one, no material data set is available. For both cases, our inverse scheme, using electric impedance measurements as input data, performs well.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@unpublished{SteinerBourinetLahmer,
  author    = {Steiner, Maria and Bourinet, Jean-Marc and Lahmer, Tom},
  title     = {An adaptive sampling method for global sensitivity analysis based on least-squares support vector regression},
  doi       = {10.25643/BAUHAUS-UNIVERSITAET.3832},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181218-38320},
  pages     = {1 -- 33},
  abstract  = {In the field of engineering, surrogate models are commonly used for approximating the behavior of a physical phenomenon in order to reduce the computational costs. Generally, a surrogate model is created based on a set of training data, where a typical method for the statistical design is the Latin hypercube sampling (LHS). Even though a space filling distribution of the training data is reached, the sampling process takes no information on the underlying behavior of the physical phenomenon into account and new data cannot be sampled in the same distribution if the approximation quality is not sufficient. Therefore, in this study we present a novel adaptive sampling method based on a specific surrogate model, the least-squares support vector regresson. The adaptive sampling method generates training data based on the uncertainty in local prognosis capabilities of the surrogate model - areas of higher uncertainty require more sample data. The approach offers a cost efficient calculation due to the properties of the least-squares support vector regression. The opportunities of the adaptive sampling method are proven in comparison with the LHS on different analytical examples. Furthermore, the adaptive sampling method is applied to the calculation of global sensitivity values according to Sobol, where it shows faster convergence than the LHS method. With the applications in this paper it is shown that the presented adaptive sampling method improves the estimation of global sensitivity values, hence reducing the overall computational costs visibly.},
  subject      = {Approximation},
  language  = {en}
}
@article{AlkamLahmer,
  author    = {Alkam, Feras and Lahmer, Tom},
  title     = {A robust method of the status monitoring of catenary poles installed along high-speed electrified train tracks},
  series = {Results in Engineering},
  volume    = {2021},
  journal   = {Results in Engineering},
  number    = {volume 12, article 100289},
  publisher = {Elsevier},
  address   = {Amsterdam},
  doi       = {10.1016/j.rineng.2021.100289},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20211011-45212},
  pages     = {1 -- 8},
  abstract  = {Electric trains are considered one of the most eco-friendly and safest means of transportation. Catenary poles are used worldwide to support overhead power lines for electric trains. The performance of the catenary poles has an extensive influence on the integrity of the train systems and, consequently, the connected human services. It became a must nowadays to develop SHM systems that provide the instantaneous status of catenary poles in- service, making the decision-making processes to keep or repair the damaged poles more feasible. This study develops a data-driven, model-free approach for status monitoring of cantilever structures, focusing on pre-stressed, spun-cast ultrahigh-strength concrete catenary poles installed along high-speed train tracks. The pro-posed approach evaluates multiple damage features in an unfied damage index, which leads to straightforward interpretation and comparison of the output. Besides, it distinguishes between multiple damage scenarios of the poles, either the ones caused by material degradation of the concrete or by the cracks that can be propagated during the life span of the given structure. Moreover, using a logistic function to classify the integrity of structure avoids the expensive learning step in the existing damage detection approaches, namely, using the modern machine and deep learning methods. The findings of this study look very promising when applied to other types of cantilever structures, such as the poles that support the power transmission lines, antenna masts, chimneys, and wind turbines.},
  subject      = {Fahrleitung},
  language  = {en}
}
@article{AlYasiriMutasharGuerlebecketal.,
  author    = {Al-Yasiri, Zainab Riyadh Shaker and Mutashar, Hayder Majid and G{\"u}rlebeck, Klaus and Lahmer, Tom},
  title     = {Damage Sensitive Signals for the Assessment of the Conditions of Wind Turbine Rotor Blades Using Electromagnetic Waves},
  series = {Infrastructures},
  volume    = {2022},
  journal   = {Infrastructures},
  number    = {Volume 7, Issue 8 (August 2022), article 104},
  editor    = {Shafiullah, GM},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/infrastructures7080104},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220831-47093},
  pages     = {18},
  abstract  = {One of the most important renewable energy technologies used nowadays are wind power turbines. In this paper, we are interested in identifying the operating status of wind turbines, especially rotor blades, by means of multiphysical models. It is a state-of-the-art technology to test mechanical structures with ultrasonic-based methods. However, due to the density and the required high resolution, the testing is performed with high-frequency waves, which cannot penetrate the structure in depth. Therefore, there is a need to adopt techniques in the fields of multiphysical model-based inversion schemes or data-driven structural health monitoring. Before investing effort in the development of such approaches, further insights and approaches are necessary to make the techniques applicable to structures such as wind power plants (blades). Among the expected developments, further accelerations of the so-called "forward codes" for a more efficient implementation of the wave equation could be envisaged. Here, we employ electromagnetic waves for the early detection of cracks. Because in many practical situations, it is not possible to apply techniques from tomography (characterized by multiple sources and sensor pairs), we focus here on the question of whether the existence of cracks can be determined by using only one source for the sent waves.},
  subject      = {Windkraftwerk},
  language  = {en}
}