@article{SadeghzadehMaddahAhmadietal.,
  author    = {Sadeghzadeh, Milad and Maddah, Heydar and Ahmadi, Mohammad Hossein and Khadang, Amirhosein and Ghazvini, Mahyar and Mosavi, Amir Hosein and Nabipour, Narjes},
  title     = {Prediction of Thermo-Physical Properties of TiO2-Al2O3/Water Nanoparticles by Using Artificial Neural Network},
  series = {Nanomaterials},
  volume    = {2020},
  journal   = {Nanomaterials},
  number    = {Volume 10, Issue 4, 697},
  publisher = {MDPI},
  address   = {Basel},
  doi       = {10.3390/nano10040697},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200421-41308},
  abstract  = {In this paper, an artificial neural network is implemented for the sake of predicting the thermal conductivity ratio of TiO2-Al2O3/water nanofluid. TiO2-Al2O3/water in the role of an innovative type of nanofluid was synthesized by the sol-gel method. The results indicated that 1.5 vol.\% of nanofluids enhanced the thermal conductivity by up to 25\%. It was shown that the heat transfer coefficient was linearly augmented with increasing nanoparticle concentration, but its variation with temperature was nonlinear. It should be noted that the increase in concentration may cause the particles to agglomerate, and then the thermal conductivity is reduced. The increase in temperature also increases the thermal conductivity, due to an increase in the Brownian motion and collision of particles. In this research, for the sake of predicting the thermal conductivity of TiO2-Al2O3/water nanofluid based on volumetric concentration and temperature functions, an artificial neural network is implemented. In this way, for predicting thermal conductivity, SOM (self-organizing map) and BP-LM (Back Propagation-Levenberq-Marquardt) algorithms were used. Based on the results obtained, these algorithms can be considered as an exceptional tool for predicting thermal conductivity. Additionally, the correlation coefficient values were equal to 0.938 and 0.98 when implementing the SOM and BP-LM algorithms, respectively, which is highly acceptable. View Full-Text},
  subject      = {W{\"a}rmeleitf{\"a}higkeit},
  language  = {en}
}
@article{AhmadiBaghbanSadeghzadehetal.,
  author    = {Ahmadi, Mohammad Hossein and Baghban, Alireza and Sadeghzadeh, Milad and Zamen, Mohammad and Mosavi, Amir and Shamshirband, Shahaboddin and Kumar, Ravinder and Mohammadi-Khanaposhtani, Mohammad},
  title     = {Evaluation of electrical efficiency of photovoltaic thermal solar collector},
  series = {Engineering Applications of Computational Fluid Mechanics},
  volume    = {2020},
  journal   = {Engineering Applications of Computational Fluid Mechanics},
  number    = {volume 14, issue 1},
  publisher = {Taylor \& Francis},
  doi       = {10.1080/19942060.2020.1734094},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20200304-41049},
  pages     = {545 -- 565},
  abstract  = {In this study, machine learning methods of artificial neural networks (ANNs), least squares support vector machines (LSSVM), and neuro-fuzzy are used for advancing prediction models for thermal performance of a photovoltaic-thermal solar collector (PV/T). In the proposed models, the inlet temperature, flow rate, heat, solar radiation, and the sun heat have been considered as the input variables. Data set has been extracted through experimental measurements from a novel solar collector system. Different analyses are performed to examine the credibility of the introduced models and evaluate their performances. The proposed LSSVM model outperformed the ANFIS and ANNs models. LSSVM model is reported suitable when the laboratory measurements are costly and time-consuming, or achieving such values requires sophisticated interpretations.},
  subject      = {Fotovoltaik},
  language  = {en}
}