@periodical{OPUS4-4864, title = {Schwerpunkt Schalten und Walten}, volume = {2020}, number = {11.2020}, editor = {Engell, Lorenz and Siegert, Bernhard}, publisher = {Felix Meiner Verlag}, address = {Hamburg}, organization = {Internationales Kolleg f{\"u}r Kulturtechnikforschung und Medienphilosophie}, issn = {2366-0767}, doi = {10.28937/ZMK-11-20}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240507-48644}, pages = {184}, abstract = {What you are about to read is the very last issue of the ZMK. Since our overall research enterprise, the IKKM, has to cease all of its activities due to the end of its twelve years' funding by the German federal government, the ZMK will also come to an end. Its last topic, Schalten und Walten has also been the subject of the concluding biannual conference of the IKKM, and we hope it will be a fitting topic to resume the research of the IKKM on Operative Ontologies. Although this final issue is in English, we decided to leave its title in German: Schalten und Walten. As it is the case for the name of the IKKM, (Internationales Kolleg f{\"u}r Kulturtechnikforschung und Medienphilosophie), the term seems untranslatable to us, not only for the poetic reason of the rhyming sound of the words. Switching and Ruling might be accepted as English versions, but quite an unbridgeable difference remains. In German, Schalten und Walten is a rather common and quite widespread idiom that can be found in everyday life. Whoever, the idiom stipulates, is able to execute Schalten und Walten has the power to act, has freedom of decision and power of disposition. Although both terms are mentioned together and belong together in the German expression Schalten und Walten, they are nevertheless complements to each other. They both refer to the exercise and existence of domination, disposal or power, but they nonetheless designate two quite different modes of being. Schalten is not so much sheer command over something, but government or management. It is linked to control, intervention and change, in short: it is operative and goes along with distinctive measures and cause-and-effect relations. The English equivalent switching reflects this more or less adequately.}, subject = {Medienwissenschaft}, language = {mul} } @article{BecherVoelkerRodehorstetal., author = {Becher, Lia and V{\"o}lker, Conrad and Rodehorst, Volker and Kuhne, Michael}, title = {Background-oriented schlieren technique for two-dimensional visualization of convective indoor air flows}, series = {Optics and Lasers in Engineering}, volume = {2020}, journal = {Optics and Lasers in Engineering}, number = {Volume 134, article 106282}, doi = {https://doi.org/10.1016/j.optlaseng.2020.106282}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220810-46972}, pages = {9}, abstract = {This article focuses on further developments of the background-oriented schlieren (BOS) technique to visualize convective indoor air flow, which is usually defined by very small density gradients. Since the light rays deflect when passing through fluids with different densities, BOS can detect the resulting refractive index gradients as integration along a line of sight. In this paper, the BOS technique is used to yield a two-dimensional visualization of small density gradients. The novelty of the described method is the implementation of a highly sensitive BOS setup to visualize the ascending thermal plume from a heated thermal manikin with temperature differences of minimum 1 K. To guarantee steady boundary conditions, the thermal manikin was seated in a climate laboratory. For the experimental investigations, a high-resolution DLSR camera was used capturing a large field of view with sufficient detail accuracy. Several parameters such as various backgrounds, focal lengths, room air temperatures, and distances between the object of investigation, camera, and structured background were tested to find the most suitable parameters to visualize convective indoor air flow. Besides these measurements, this paper presents the analyzing method using cross-correlation algorithms and finally the results of visualizing the convective indoor air flow with BOS. The highly sensitive BOS setup presented in this article complements the commonly used invasive methods that highly influence weak air flows.}, subject = {Raumklima}, language = {en} } @article{DokhanchiArnoldVogeletal.2020, author = {Dokhanchi, Najmeh Sadat and Arnold, J{\"o}rg and Vogel, Albert and V{\"o}lker, Conrad}, title = {Measurement of indoor air temperature distribution using acoustic travel-time tomography: Optimization of transducers location and sound-ray coverage of the room}, series = {Measurement}, volume = {2020}, journal = {Measurement}, number = {Volume 164, article 107934}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.1016/j.measurement.2020.107934}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220524-46473}, year = {2020}, abstract = {Acoustic travel-time TOMography (ATOM) allows the measurement and reconstruction of air temperature distributions. Due to limiting factors, such as the challenge of travel-time estimation of the early reflections in the room impulse response, which heavily depends on the position of transducers inside the measurement area, ATOM is applied mainly outdoors. To apply ATOM in buildings, this paper presents a numerical solution to optimize the positions of transducers. This optimization avoids reflection overlaps, leading to distinguishable travel-times in the impulse response reflectogram. To increase the accuracy of the measured temperature within tomographic voxels, an additional function is employed to the proposed numerical method to minimize the number of sound-path-free voxels, ensuring the best sound-ray coverage of the room. Subsequently, an experimental set-up has been performed to verify the proposed numerical method. The results indicate the positive impact of the optimal positions of transducers on the distribution of ATOM-temperatures.}, subject = {Bauphysik}, language = {en} } @article{ArtusKoch, author = {Artus, Mathias and Koch, Christian}, title = {State of the art in damage information modeling for RC bridges - A literature review}, series = {Advanced Engineering Informatics}, volume = {2020}, journal = {Advanced Engineering Informatics}, number = {volume 46, article 101171}, publisher = {Elsevier Science}, address = {Amsterdam}, doi = {10.1016/j.aei.2020.101171}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220506-46390}, pages = {1 -- 16}, abstract = {In Germany, bridges have an average age of 40 years. A bridge consumes between 0.4\% and 2\% of its construction cost per year over its entire life cycle. This means that up to 80\% of the construction cost are additionally needed for operation, inspection, maintenance, and destruction. Current practices rely either on paperbased inspections or on abstract specialist software. Every application in the inspection and maintenance sector uses its own data model for structures, inspections, defects, and maintenance. Due to this, data and properties have to be transferred manually, otherwise a converter is necessary for every data exchange between two applications. To overcome this issue, an adequate model standard for inspections, damage, and maintenance is necessary. Modern 3D models may serve as a single source of truth, which has been suggested in the Building Information Modeling (BIM) concept. Further, these models offer a clear visualization of the built infrastructure, and improve not only the planning and construction phases, but also the operation phase of construction projects. BIM is established mostly in the Architecture, Engineering, and Construction (AEC) sector to plan and construct new buildings. Currently, BIM does not cover the whole life cycle of a building, especially not inspection and maintenance. Creating damage models needs the building model first, because a defect is dependent on the building component, its properties and material. Hence, a building information model is necessary to obtain meaningful conclusions from damage information. This paper analyzes the requirements, which arise from practice, and the research that has been done in modeling damage and related information for bridges. With a look at damage categories and use cases related to inspection and maintenance, scientific literature is discussed and synthesized. Finally, research gaps and needs are identified and discussed.}, subject = {Building Information Modeling}, language = {de} } @phdthesis{Javanmardi, author = {Javanmardi, Leila}, title = {URBANISM AND DICTATORSHIP. A Study on Urban Planning in Contemporary History of Iran, Second Pahlavi: 1941-1979}, doi = {10.25643/bauhaus-universitaet.4597}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220224-45971}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {237}, abstract = {The evolution of urbanism under dictatorship forms the core of the current research. This thesis is part of a research network at Bauhaus-Universit{\"a}t Weimar, which studies the 20th century's urbanism under different dictatorships. The network has provided a cross-cultural and cross-border environment and has enabled the author to communicate with other like-minded researchers. The 2015 published book of this group 'Urbanism and Dictatorship: A European Perspective' strengthens the foundation of this research's theoretical and methodological framework. This thesis investigates urban policies and plans leading to the advancement of urbanization and the transformation of urban space in Iran during the second Pahlavi (1941-1979) when the country faced a milestone in its history: Nationalization of the Iranian oil industry. By reflecting the influence of economic and socio-political determinants of the time on urbanism and the urbanization process, this work intends to critically trace the effect of dictatorship on evolved urbanism before and after the oil nationalization in 1951. The research on the second Pahlavi's urbanism has been limitedly addressed and has only recently expanded. Most of the conducted studies date back to less than a decade ago and could not incorporate all the episodes of the second Pahlavi urbanism. These works have often investigated urbanism and architecture by focusing merely on the physical features and urban products in different years regardless of the importance of urbanism as a tool in the service of hegemony. In other words, the majority of the available literature does not intend to address the socio-economic and political roots of urban transformations and by questioning 'what has been built?' investigates the individual urban projects and plans designed by individual designers without interlinking these projects to the state's urban planning program and tracing the beneficiaries of those projects or questioning 'built for whom?' Moreover, some chapters of this modern urbanism have rarely been investigated. For instance, scant research has looked into the works of foreign designers and consultants involved in the projects such as Peter Georg Ahrens or Constantinos A. Doxiadis. Similarly, the urbanism of the first decade of the second Pahlavi, including the government of Mossadegh, has mainly been overlooked. Therefore, by critically analyzing the state's urban planning program and the process of urbanization in Iran during the second Pahlavi, this research aims to bridge the literature gap and to unravel the effect of the power structure on urban planning and products while seeking to find a pattern behind the regime's policies. The main body of this work is concentrated on studying the history of urbanism in Iran, of which collecting data and descriptions played a crucial role. To prevent the limitations associated with singular methods, this research's methodology is based on methodological triangulation (Denzin, 2017). With the triangulation scheme, the data is gathered by combining different qualitative and quantitative methods such as the library, archival and media research, online resources, non-participatory observation, and photography. For the empirical part, the city of Tehran is selected as the case study. Moreover, individual non-structured interviews with the locals were conducted to gain more insights regarding urban projects.}, subject = {Stadtplanung}, language = {en} } @article{SeichterNesslerKnopf, author = {Seichter, Cosima Zita and Neßler, Miriam and Knopf, Paul}, title = {Mapping In-Betweenness. The Refugee District in Belgrade in the Context of Migration, Urban Development, and Border Regimes}, series = {Movements. Journal for Critical Migration and Border Regime Studies}, volume = {2020}, journal = {Movements. Journal for Critical Migration and Border Regime Studies}, number = {Volume 5, Issue 1}, address = {G{\"o}ttingen}, doi = {10.25643/bauhaus-universitaet.4480}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210806-44807}, pages = {1 -- 9}, abstract = {The contribution explores the migratory situation on the Balkans and more specifically in the so-called Refugee District in Belgrade from a spatial perspective. By visualizing the areas of tensions in the Refugee District, the city of Belgrade, Serbia and Europe it aims to disentangle the political and socio-spatial levels that lead to the stuck situation of in-betweenness at the gates of the European Union.}, subject = {Europ{\"a}ische Union}, language = {en} } @article{CerejeirasKaehlerLegatiuketal., author = {Cerejeiras, Paula and K{\"a}hler, Uwe and Legatiuk, Anastasiia and Legatiuk, Dmitrii}, title = {Discrete Hardy Spaces for Bounded Domains in Rn}, series = {Complex Analysis and Operator Theory}, volume = {2021}, journal = {Complex Analysis and Operator Theory}, number = {Volume 15, article 4}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s11785-020-01047-6}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44746}, pages = {1 -- 32}, abstract = {Discrete function theory in higher-dimensional setting has been in active development since many years. However, available results focus on studying discrete setting for such canonical domains as half-space, while the case of bounded domains generally remained unconsidered. Therefore, this paper presents the extension of the higher-dimensional function theory to the case of arbitrary bounded domains in Rn. On this way, discrete Stokes' formula, discrete Borel-Pompeiu formula, as well as discrete Hardy spaces for general bounded domains are constructed. Finally, several discrete Hilbert problems are considered.}, subject = {Dirac-Operator}, language = {en} } @article{TutalPartschefeldSchneideretal., author = {Tutal, Adrian and Partschefeld, Stephan and Schneider, Jens and Osburg, Andrea}, title = {Effects of Bio-Based Plasticizers, Made From Starch, on the Properties of Fresh and Hardened Metakaolin-Geopolymer Mortar: Basic Investigations}, series = {Clays and Clay Minerals}, volume = {2020}, journal = {Clays and Clay Minerals}, number = {volume 68, No. 5}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s42860-020-00084-8}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44737}, pages = {413 -- 427}, abstract = {Conventional superplasticizers based on polycarboxylate ether (PCE) show an intolerance to clay minerals due to intercalation of their polyethylene glycol (PEG) side chains into the interlayers of the clay mineral. An intolerance to very basic media is also known. This makes PCE an unsuitable choice as a superplasticizer for geopolymers. Bio-based superplasticizers derived from starch showed comparable effects to PCE in a cementitious system. The aim of the present study was to determine if starch superplasticizers (SSPs) could be a suitable additive for geopolymers by carrying out basic investigations with respect to slump, hardening, compressive and flexural strength, shrinkage, and porosity. Four SSPs were synthesized, differing in charge polarity and specific charge density. Two conventional PCE superplasticizers, differing in terms of molecular structure, were also included in this study. The results revealed that SSPs improved the slump of a metakaolin-based geopolymer (MK-geopolymer) mortar while the PCE investigated showed no improvement. The impact of superplasticizers on early hardening (up to 72 h) was negligible. Less linear shrinkage over the course of 56 days was seen for all samples in comparison with the reference. Compressive strengths of SSP specimens tested after 7 and 28 days of curing were comparable to the reference, while PCE led to a decline. The SSPs had a small impact on porosity with a shift to the formation of more gel pores while PCE caused an increase in porosity. Throughout this research, SSPs were identified as promising superplasticizers for MK-geopolymer mortar and concrete.}, subject = {Geopolymere}, language = {en} } @article{SchirmerOsburg, author = {Schirmer, Ulrike and Osburg, Andrea}, title = {A new method for the quantification of adsorbed styrene acrylate copolymer particles on cementitious surfaces: a critical comparative study}, series = {SN Applied Sciences}, volume = {2020}, journal = {SN Applied Sciences}, number = {Volume 2, article 2061}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s42452-020-03825-5}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44729}, pages = {1 -- 11}, abstract = {The amount of adsorbed styrene acrylate copolymer (SA) particles on cementitious surfaces at the early stage of hydration was quantitatively determined using three different methodological approaches: the depletion method, the visible spectrophotometry (VIS) and the thermo-gravimetry coupled with mass spectrometry (TG-MS). Considering the advantages and disadvantages of each method, including the respectively required sample preparation, the results for four polymer-modified cement pastes, varying in polymer content and cement fineness, were evaluated. To some extent, significant discrepancies in the adsorption degrees were observed. There is a tendency that significantly lower amounts of adsorbed polymers were identified using TG-MS compared to values determined with the depletion method. Spectrophotometrically generated values were ​​lying in between these extremes. This tendency was found for three of the four cement pastes examined and is originated in sample preparation and methodical limitations. The main influencing factor is the falsification of the polymer concentration in the liquid phase during centrifugation. Interactions in the interface between sediment and supernatant are the cause. The newly developed method, using TG-MS for the quantification of SA particles, proved to be suitable for dealing with these revealed issues. Here, instead of the fluid phase, the sediment is examined with regard to the polymer content, on which the influence of centrifugation is considerably lower.}, subject = {Zement}, language = {en} } @misc{Coenen, author = {Coenen, Ekkehard}, title = {Hans Ruin: Being with the Dead—Burial, ancestral politics, and the roots of historical consciousness}, series = {Human Studies}, volume = {2020}, journal = {Human Studies}, number = {Volume 43}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s10746-020-09565-0}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44712}, pages = {683 -- 689}, abstract = {How can society be thought of as something in which the living and the dead interact throughout history? In Being with the Dead. Burial, Ancestral Politics, and the Roots of Historical Consciousness, Hans Ruin turns to the relationship between the living and the dead as well as 'historical consciousness'. He is referring to the expression 'being with the dead' (Mitsein mit dem Toten). Rather en passant, Martin Heidegger (1962: 282) shaped this existential-ontological term, which so far has hardly received any consideration. But for Ruin, it now forms the starting point for his "expanded phenomenological social ontology" (p. XI). By illuminating history and historical consciousness with the category 'being with the dead,' he gains remarkable insights into the meaning of ancestrality. Concerning 'necropolitics,' Ruin shows that the political space includes the living as well as the dead and how they constitute it. The foci of his considerations are the human sciences, above all sociology, anthropology, archaeology, philology and history. Ruin's book aims at a "metacritical thanatology," which he elaborates as "an exploration of the social ontology of being with the dead mediated through critical analyses of the human-historical sciences themselves" (p. XII). As a result, in a total of seven chapters, he succeeds astonishingly in emphasizing the political and ethical importance of a scientific gaze that cultivates the interaction of the living and the dead.}, subject = {Geschichtswissenschaft}, language = {en} } @article{ReichertOlneyLahmer, author = {Reichert, Ina and Olney, Peter and Lahmer, Tom}, title = {Combined approach for optimal sensor placement and experimental verification in the context of tower-like structures}, series = {Journal of Civil Structural Health Monitoring}, volume = {2021}, journal = {Journal of Civil Structural Health Monitoring}, number = {volume 11}, publisher = {Heidelberg}, address = {Springer}, doi = {10.1007/s13349-020-00448-7}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44701}, pages = {223 -- 234}, abstract = {When it comes to monitoring of huge structures, main issues are limited time, high costs and how to deal with the big amount of data. In order to reduce and manage them, respectively, methods from the field of optimal design of experiments are useful and supportive. Having optimal experimental designs at hand before conducting any measurements is leading to a highly informative measurement concept, where the sensor positions are optimized according to minimal errors in the structures' models. For the reduction of computational time a combined approach using Fisher Information Matrix and mean-squared error in a two-step procedure is proposed under the consideration of different error types. The error descriptions contain random/aleatoric and systematic/epistemic portions. Applying this combined approach on a finite element model using artificial acceleration time measurement data with artificially added errors leads to the optimized sensor positions. These findings are compared to results from laboratory experiments on the modeled structure, which is a tower-like structure represented by a hollow pipe as the cantilever beam. Conclusively, the combined approach is leading to a sound experimental design that leads to a good estimate of the structure's behavior and model parameters without the need of preliminary measurements for model updating.}, subject = {Strukturmechanik}, language = {en} } @article{Batra, author = {Batra, Ritika}, title = {Gauging the stakeholders' perspective: towards PPP in building sectors and housing}, series = {Journal of Housing and the Built Environment}, volume = {2020}, journal = {Journal of Housing and the Built Environment}, number = {volume 35}, publisher = {SpringerNature}, address = {Cham}, doi = {10.1007/s10901-020-09754-4}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210413-44124}, pages = {1123 -- 1156}, abstract = {While Public-Private Partnership (PPP) is widely adopted across various sectors, it raises a question on its meagre utilisation in the housing sector. This paper, therefore, gauges the perspective of the stakeholders in the building industry towards the application of PPP in various building sectors together with housing. It assesses the performance reliability of PPP for housing by learning possible take-aways from other sectors. The role of key stakeholders in the industry becomes highly responsible for an informed understanding and decision-making. To this end, a two-tier investigation was conducted including surveys and expert interviews, with several stakeholders in the PPP industry in Europe, involving the public sector, private sector, consultants, as well as other community/user representatives. The survey results demonstrated the success rate with PPPs, major factors important for PPPs such as profitability or end-user acceptability, the prevalent practices and trends in the PPP world, and the majority of support expressed in favour of the suitability of PPP for housing. The interviews added more detailed dimensions to the understanding of the PPP industry, its functioning and enabling the formation of a comprehensive outlook. The results present the perspective, approaches, and experiences of stakeholders over PPP practices, current trends and scenarios and their take on PPP in housing. It shall aid in understanding the challenges prevalent in the PPP approach for implementation in housing and enable the policymakers and industry stakeholders to make provisions for higher uptake to accelerate housing provision.}, subject = {{\"O}ffentlich-private Partnerschaft}, language = {en} } @misc{Freire, type = {Master Thesis}, author = {Freire, Kamai}, title = {Panafricanism and African Revolution in Brazilian Music}, doi = {10.25643/bauhaus-universitaet.4353}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210216-43536}, school = {Hochschule f{\"u}r Musik FRANZ LISZT}, pages = {163}, abstract = {This research departs from the teachings of Kwame Ture on the difference between mobilization and organization in the panafricanist struggle to analyze then the use of Music within the anti-racist and anti-colonialist struggle in Brazil.}, subject = {Saz}, language = {en} } @phdthesis{Oevermann, author = {Oevermann, Heike}, title = {Historische Industriekomplexe in der Stadt}, doi = {10.25643/bauhaus-universitaet.4358}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210203-43582}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {168}, abstract = {Das Buch greift die enge Verkn{\"u}pfung von Industrialisierung und Urbanisierung auf, die in den letzten gut 250 Jahren Europas St{\"a}dte und ihre Stadtbaugeschichte maßgeblich gepr{\"a}gt hat. Damit stellen sich auch vielf{\"a}ltige Fragen und Aufgaben f{\"u}r die Denkmalpflege. Die Habilitationsschrift leistet einen Beitrag, um die stadtbaugeschichtlichen und stadtbildpr{\"a}genden Werte historischer Industriekomplexe zu erkennen und zu erhalten. Wie k{\"o}nnen wir die industriellen Stadtlandschaften erfassen? Wie gestalten wir Umnutzungen und Konversionen denkmalgerecht und beziehen im Rahmen eines Heritage-Managements Aspekte der nachhaltigen Stadtentwicklung ein?}, subject = {Denkmalpflege}, language = {de} } @article{BrokowLogaNessler, author = {Brokow-Loga, Anton and Neßler, Miriam}, title = {Eine Frage der Fl{\"a}chengerechtigkeit! Kommentar zu Lisa Vollmer und Boris Michel „Wohnen in der Klimakrise. Die Wohnungsfrage als {\"o}kologische Frage"}, series = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.572}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43333}, pages = {183 -- 192}, abstract = {Die derzeitige Wohnungskrise hat eine sozial-{\"o}kologische Kernproblematik. Dabei ist die sozial ungerechte und {\"o}kologisch problematische Verteilung von Wohnfl{\"a}che meist unsichtbar und wird weder in wissenschaftlichen noch in aktivistischen Kontexten ausreichend als Frage der Fl{\"a}chengerechtigkeit problematisiert. Denn Wohnraum und Fl{\"a}che in einer Stadt sind keine endlos verf{\"u}gbaren G{\"u}ter: Wenn einige Menschen auf viel Raum leben, bleibt f{\"u}r andere Menschen weniger Fl{\"a}che {\"u}brig. Und die Menschen, die am wenigstens f{\"u}r eine Verknappung von Wohnraum verantwortlich sind, leiden am meisten darunter. Dieser Artikel arbeitet zun{\"a}chst den Begriff der Wohnfl{\"a}chengerechtigkeit heraus, wobei auf die Ungleichverteilung von Wohnfl{\"a}che und deren gesellschaftliche Implikationen unter derzeitigen Wohnungsverteilungsmechanismen Bezug genommen wird. Anschließend wird der Verbrauch von (Wohn-)Fl{\"a}che aus {\"o}kologischer Perspektive problematisiert. Der Artikel diskutiert scheinbare und transformationsorientierte L{\"o}sungs- und Handlungsans{\"a}tze. Abschließend fordert er in der kritischen Stadtforschung und in aktivistischen Kontexten eine st{\"a}rkere Debatte um eine Wohnfl{\"a}chengerechtigkeit, deren Verwirklichung gleichermaßen eine soziale wie {\"o}kologische Dimension hat.}, subject = {Wohnen}, language = {de} } @misc{VollmerMichel, author = {Vollmer, Lisa and Michel, Boris}, title = {Wohnen in der Klimakrise. Die Wohnungsfrage als {\"o}kologische Frage: Aufruf zur Debatte}, series = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.552}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43327}, pages = {163 -- 166}, abstract = {Die Verbindung der sozialen und der {\"o}kologischen Frage ist eine der zentralen Herausforderungen linker Politik und kritisch-engagierter Wissenschaft heute. Daf{\"u}r, wie wenig das bisher gelingt, sind die {\"o}ffentlichen und wissenschaftlichen Diskussionen um die Wohnungsfrage gute Beispiele. Dieser Aufruf ist eine Einladung an den kollektiven Wissensschatz aus Wissenschaft und Aktivismus, die unterschiedlichen Aspekte der {\"o}kologischen Wohnungsfrage, die bisher stark fragmentiert behandelt werden, in einzelnen Beitr{\"a}gen weiter auszuf{\"u}hren und auf ihren strukturellen Zusammenhang mit der sozialen Wohnungsfrage hin zu beleuchten.}, subject = {Wohnen}, language = {de} } @article{Schoenig, author = {Sch{\"o}nig, Barbara}, title = {Ererbte Transformation. Kommentar zu Matthias Bernt und Andrej Holm „Die Ostdeutschlandforschung muss das Wohnen in den Blick nehmen"}, series = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n. zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 3}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i3.620}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43296}, pages = {115 -- 122}, abstract = {Matthias Bernt und Andrej Holm weisen zu Recht darauf hin, dass es einer Forschung zu ostdeutschen St{\"a}dten als konzeptionell eigenst{\"a}ndigem Feld bedarf, die die spezifische Verr{\"a}umlichung des tiefgreifenden gesellschaftlichen Transformationsprozesses nach 1990 ins Zentrum stellt. Dabei betrachten sie insbesondere das Feld des Wohnens als produktiv, um Kenntnis {\"u}ber die Struktur und Wirkung dieses Prozesses zu erlangen. Allerdings bleiben sie vage dabei, wie eine solche spezifisch auf Ostdeutschland gerichtete Wohnungsforschung zu konzipieren w{\"a}re und in welcher Weise die Besonderheiten und Parallelit{\"a}ten ostdeutscher Entwicklungen zu den Transformationen von Wohnungs- und Stadtentwicklungspolitik in Westdeutschland, aber auch international, in Bezug zu setzen w{\"a}ren.}, subject = {Deutschland <{\"O}stliche L{\"a}nder>}, language = {de} } @article{LandauToland, author = {Landau, Friederike and Toland, Alexandra}, title = {Luft sehen, sprechen, sch{\"u}tzen. Das Anthropoz{\"a}n der (post-)politischen Stadt}, series = {s u b \ u r b a n . zeitschrift f{\"u}r kritische stadtforschung}, volume = {2020}, journal = {s u b \ u r b a n . zeitschrift f{\"u}r kritische stadtforschung}, number = {Band 8, Heft 1/2}, publisher = {Sub\urban e.V.}, address = {Leipzig}, doi = {10.36900/suburban.v8i1/2.579}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43305}, pages = {117 -- 136}, abstract = {Der Beitrag verbindet die Diskussion um die postpolitische Stadt mit der zunehmenden wissenschaftlichen und aktivistischen Auseinandersetzung mit dem Anthropoz{\"a}n, ein Konzept, das die {\"o}kologischen und sozialpolitischen Implikationen menschlichen Handelns auf die Erdoberfl{\"a}che beschreibt. Anhand von drei ausgew{\"a}hlten Fallstudien erkunden wir, wie die spezifisch anthropogene, also menschengemachte, Krise urbaner Luftverschmutzung in k{\"u}nstlerischen Positionen problematisiert wird. Im Kontext des potenziellen Vormarschs von Postpolitik besprechen wir, wie der ambivalente Diskurs des Anthropoz{\"a}ns einerseits Depolitisierung beg{\"u}nstigt und andererseits neue M{\"o}glichkeiten f{\"u}r die Repolitisierung globaler Umweltherausforderungen erm{\"o}glicht.}, subject = {Anthropoz{\"a}n}, language = {de} } @article{BandJanizadehChandraPaletal., author = {Band, Shahab S. and Janizadeh, Saeid and Chandra Pal, Subodh and Chowdhuri, Indrajit and Siabi, Zhaleh and Norouzi, Akbar and Melesse, Assefa M. and Shokri, Manouchehr and Mosavi, Amir Hosein}, title = {Comparative Analysis of Artificial Intelligence Models for Accurate Estimation of Groundwater Nitrate Concentration}, series = {Sensors}, volume = {2020}, journal = {Sensors}, number = {Volume 20, issue 20, article 5763}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/s20205763}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43364}, pages = {1 -- 23}, abstract = {Prediction of the groundwater nitrate concentration is of utmost importance for pollution control and water resource management. This research aims to model the spatial groundwater nitrate concentration in the Marvdasht watershed, Iran, based on several artificial intelligence methods of support vector machine (SVM), Cubist, random forest (RF), and Bayesian artificial neural network (Baysia-ANN) machine learning models. For this purpose, 11 independent variables affecting groundwater nitrate changes include elevation, slope, plan curvature, profile curvature, rainfall, piezometric depth, distance from the river, distance from residential, Sodium (Na), Potassium (K), and topographic wetness index (TWI) in the study area were prepared. Nitrate levels were also measured in 67 wells and used as a dependent variable for modeling. Data were divided into two categories of training (70\%) and testing (30\%) for modeling. The evaluation criteria coefficient of determination (R2), mean absolute error (MAE), root mean square error (RMSE), and Nash-Sutcliffe efficiency (NSE) were used to evaluate the performance of the models used. The results of modeling the susceptibility of groundwater nitrate concentration showed that the RF (R2 = 0.89, RMSE = 4.24, NSE = 0.87) model is better than the other Cubist (R2 = 0.87, RMSE = 5.18, NSE = 0.81), SVM (R2 = 0.74, RMSE = 6.07, NSE = 0.74), Bayesian-ANN (R2 = 0.79, RMSE = 5.91, NSE = 0.75) models. The results of groundwater nitrate concentration zoning in the study area showed that the northern parts of the case study have the highest amount of nitrate, which is higher in these agricultural areas than in other areas. The most important cause of nitrate pollution in these areas is agriculture activities and the use of groundwater to irrigate these crops and the wells close to agricultural areas, which has led to the indiscriminate use of chemical fertilizers by irrigation or rainwater of these fertilizers is washed and penetrates groundwater and pollutes the aquifer.}, subject = {Grundwasser}, language = {en} } @article{KarimimoshaverHajivalieiShokrietal., author = {Karimimoshaver, Mehrdad and Hajivaliei, Hatameh and Shokri, Manouchehr and Khalesro, Shakila and Aram, Farshid and Shamshirband, Shahaboddin}, title = {A Model for Locating Tall Buildings through a Visual Analysis Approach}, series = {Applied Sciences}, volume = {2020}, journal = {Applied Sciences}, number = {Volume 10, issue 17, article 6072}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/app10176072}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210122-43350}, pages = {1 -- 25}, abstract = {Tall buildings have become an integral part of cities despite all their pros and cons. Some current tall buildings have several problems because of their unsuitable location; the problems include increasing density, imposing traffic on urban thoroughfares, blocking view corridors, etc. Some of these buildings have destroyed desirable views of the city. In this research, different criteria have been chosen, such as environment, access, social-economic, land-use, and physical context. These criteria and sub-criteria are prioritized and weighted by the analytic network process (ANP) based on experts' opinions, using Super Decisions V2.8 software. On the other hand, layers corresponding to sub-criteria were made in ArcGIS 10.3 simultaneously, then via a weighted overlay (map algebra), a locating plan was created. In the next step seven hypothetical tall buildings (20 stories), in the best part of the locating plan, were considered to evaluate how much of theses hypothetical buildings would be visible (fuzzy visibility) from the street and open spaces throughout the city. These processes have been modeled by MATLAB software, and the final fuzzy visibility plan was created by ArcGIS. Fuzzy visibility results can help city managers and planners to choose which location is suitable for a tall building and how much visibility may be appropriate. The proposed model can locate tall buildings based on technical and visual criteria in the future development of the city and it can be widely used in any city as long as the criteria and weights are localized.}, subject = {Geb{\"a}ude}, language = {en} }