@periodical{OPUS4-4864, title = {Schwerpunkt Schalten und Walten}, volume = {2020}, number = {11.2020}, editor = {Engell, Lorenz and Siegert, Bernhard}, publisher = {Felix Meiner Verlag}, address = {Hamburg}, organization = {Internationales Kolleg f{\"u}r Kulturtechnikforschung und Medienphilosophie}, issn = {2366-0767}, doi = {10.28937/ZMK-11-20}, pages = {184}, abstract = {What you are about to read is the very last issue of the ZMK. Since our overall research enterprise, the IKKM, has to cease all of its activities due to the end of its twelve years' funding by the German federal government, the ZMK will also come to an end. Its last topic, Schalten und Walten has also been the subject of the concluding biannual conference of the IKKM, and we hope it will be a fitting topic to resume the research of the IKKM on Operative Ontologies. Although this final issue is in English, we decided to leave its title in German: Schalten und Walten. As it is the case for the name of the IKKM, (Internationales Kolleg f{\"u}r Kulturtechnikforschung und Medienphilosophie), the term seems untranslatable to us, not only for the poetic reason of the rhyming sound of the words. Switching and Ruling might be accepted as English versions, but quite an unbridgeable difference remains. In German, Schalten und Walten is a rather common and quite widespread idiom that can be found in everyday life. Whoever, the idiom stipulates, is able to execute Schalten und Walten has the power to act, has freedom of decision and power of disposition. Although both terms are mentioned together and belong together in the German expression Schalten und Walten, they are nevertheless complements to each other. They both refer to the exercise and existence of domination, disposal or power, but they nonetheless designate two quite different modes of being. Schalten is not so much sheer command over something, but government or management. It is linked to control, intervention and change, in short: it is operative and goes along with distinctive measures and cause-and-effect relations. The English equivalent switching reflects this more or less adequately.}, subject = {Medienwissenschaft}, language = {mul} } @article{BecherVoelkerRodehorstetal., author = {Becher, Lia and V{\"o}lker, Conrad and Rodehorst, Volker and Kuhne, Michael}, title = {Background-oriented schlieren technique for two-dimensional visualization of convective indoor air flows}, series = {Optics and Lasers in Engineering}, volume = {2020}, journal = {Optics and Lasers in Engineering}, number = {Volume 134, article 106282}, doi = {https://doi.org/10.1016/j.optlaseng.2020.106282}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220810-46972}, pages = {9}, abstract = {This article focuses on further developments of the background-oriented schlieren (BOS) technique to visualize convective indoor air flow, which is usually defined by very small density gradients. Since the light rays deflect when passing through fluids with different densities, BOS can detect the resulting refractive index gradients as integration along a line of sight. In this paper, the BOS technique is used to yield a two-dimensional visualization of small density gradients. The novelty of the described method is the implementation of a highly sensitive BOS setup to visualize the ascending thermal plume from a heated thermal manikin with temperature differences of minimum 1 K. To guarantee steady boundary conditions, the thermal manikin was seated in a climate laboratory. For the experimental investigations, a high-resolution DLSR camera was used capturing a large field of view with sufficient detail accuracy. Several parameters such as various backgrounds, focal lengths, room air temperatures, and distances between the object of investigation, camera, and structured background were tested to find the most suitable parameters to visualize convective indoor air flow. Besides these measurements, this paper presents the analyzing method using cross-correlation algorithms and finally the results of visualizing the convective indoor air flow with BOS. The highly sensitive BOS setup presented in this article complements the commonly used invasive methods that highly influence weak air flows.}, subject = {Raumklima}, language = {en} } @article{DokhanchiArnoldVogeletal.2020, author = {Dokhanchi, Najmeh Sadat and Arnold, J{\"o}rg and Vogel, Albert and V{\"o}lker, Conrad}, title = {Measurement of indoor air temperature distribution using acoustic travel-time tomography: Optimization of transducers location and sound-ray coverage of the room}, series = {Measurement}, volume = {2020}, journal = {Measurement}, number = {Volume 164, article 107934}, publisher = {Elsevier}, address = {Amsterdam}, doi = {10.1016/j.measurement.2020.107934}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220524-46473}, year = {2020}, abstract = {Acoustic travel-time TOMography (ATOM) allows the measurement and reconstruction of air temperature distributions. Due to limiting factors, such as the challenge of travel-time estimation of the early reflections in the room impulse response, which heavily depends on the position of transducers inside the measurement area, ATOM is applied mainly outdoors. To apply ATOM in buildings, this paper presents a numerical solution to optimize the positions of transducers. This optimization avoids reflection overlaps, leading to distinguishable travel-times in the impulse response reflectogram. To increase the accuracy of the measured temperature within tomographic voxels, an additional function is employed to the proposed numerical method to minimize the number of sound-path-free voxels, ensuring the best sound-ray coverage of the room. Subsequently, an experimental set-up has been performed to verify the proposed numerical method. The results indicate the positive impact of the optimal positions of transducers on the distribution of ATOM-temperatures.}, subject = {Bauphysik}, language = {en} } @article{ArtusKoch, author = {Artus, Mathias and Koch, Christian}, title = {State of the art in damage information modeling for RC bridges - A literature review}, series = {Advanced Engineering Informatics}, volume = {2020}, journal = {Advanced Engineering Informatics}, number = {volume 46, article 101171}, publisher = {Elsevier Science}, address = {Amsterdam}, doi = {10.1016/j.aei.2020.101171}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220506-46390}, pages = {1 -- 16}, abstract = {In Germany, bridges have an average age of 40 years. A bridge consumes between 0.4\% and 2\% of its construction cost per year over its entire life cycle. This means that up to 80\% of the construction cost are additionally needed for operation, inspection, maintenance, and destruction. Current practices rely either on paperbased inspections or on abstract specialist software. Every application in the inspection and maintenance sector uses its own data model for structures, inspections, defects, and maintenance. Due to this, data and properties have to be transferred manually, otherwise a converter is necessary for every data exchange between two applications. To overcome this issue, an adequate model standard for inspections, damage, and maintenance is necessary. Modern 3D models may serve as a single source of truth, which has been suggested in the Building Information Modeling (BIM) concept. Further, these models offer a clear visualization of the built infrastructure, and improve not only the planning and construction phases, but also the operation phase of construction projects. BIM is established mostly in the Architecture, Engineering, and Construction (AEC) sector to plan and construct new buildings. Currently, BIM does not cover the whole life cycle of a building, especially not inspection and maintenance. Creating damage models needs the building model first, because a defect is dependent on the building component, its properties and material. Hence, a building information model is necessary to obtain meaningful conclusions from damage information. This paper analyzes the requirements, which arise from practice, and the research that has been done in modeling damage and related information for bridges. With a look at damage categories and use cases related to inspection and maintenance, scientific literature is discussed and synthesized. Finally, research gaps and needs are identified and discussed.}, subject = {Building Information Modeling}, language = {de} } @phdthesis{Javanmardi, author = {Javanmardi, Leila}, title = {URBANISM AND DICTATORSHIP. A Study on Urban Planning in Contemporary History of Iran, Second Pahlavi: 1941-1979}, doi = {10.25643/bauhaus-universitaet.4597}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220224-45971}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {237}, abstract = {The evolution of urbanism under dictatorship forms the core of the current research. This thesis is part of a research network at Bauhaus-Universit{\"a}t Weimar, which studies the 20th century's urbanism under different dictatorships. The network has provided a cross-cultural and cross-border environment and has enabled the author to communicate with other like-minded researchers. The 2015 published book of this group 'Urbanism and Dictatorship: A European Perspective' strengthens the foundation of this research's theoretical and methodological framework. This thesis investigates urban policies and plans leading to the advancement of urbanization and the transformation of urban space in Iran during the second Pahlavi (1941-1979) when the country faced a milestone in its history: Nationalization of the Iranian oil industry. By reflecting the influence of economic and socio-political determinants of the time on urbanism and the urbanization process, this work intends to critically trace the effect of dictatorship on evolved urbanism before and after the oil nationalization in 1951. The research on the second Pahlavi's urbanism has been limitedly addressed and has only recently expanded. Most of the conducted studies date back to less than a decade ago and could not incorporate all the episodes of the second Pahlavi urbanism. These works have often investigated urbanism and architecture by focusing merely on the physical features and urban products in different years regardless of the importance of urbanism as a tool in the service of hegemony. In other words, the majority of the available literature does not intend to address the socio-economic and political roots of urban transformations and by questioning 'what has been built?' investigates the individual urban projects and plans designed by individual designers without interlinking these projects to the state's urban planning program and tracing the beneficiaries of those projects or questioning 'built for whom?' Moreover, some chapters of this modern urbanism have rarely been investigated. For instance, scant research has looked into the works of foreign designers and consultants involved in the projects such as Peter Georg Ahrens or Constantinos A. Doxiadis. Similarly, the urbanism of the first decade of the second Pahlavi, including the government of Mossadegh, has mainly been overlooked. Therefore, by critically analyzing the state's urban planning program and the process of urbanization in Iran during the second Pahlavi, this research aims to bridge the literature gap and to unravel the effect of the power structure on urban planning and products while seeking to find a pattern behind the regime's policies. The main body of this work is concentrated on studying the history of urbanism in Iran, of which collecting data and descriptions played a crucial role. To prevent the limitations associated with singular methods, this research's methodology is based on methodological triangulation (Denzin, 2017). With the triangulation scheme, the data is gathered by combining different qualitative and quantitative methods such as the library, archival and media research, online resources, non-participatory observation, and photography. For the empirical part, the city of Tehran is selected as the case study. Moreover, individual non-structured interviews with the locals were conducted to gain more insights regarding urban projects.}, subject = {Stadtplanung}, language = {en} } @article{SeichterNesslerKnopf, author = {Seichter, Cosima Zita and Neßler, Miriam and Knopf, Paul}, title = {Mapping In-Betweenness. The Refugee District in Belgrade in the Context of Migration, Urban Development, and Border Regimes}, series = {Movements. Journal for Critical Migration and Border Regime Studies}, volume = {2020}, journal = {Movements. Journal for Critical Migration and Border Regime Studies}, number = {Volume 5, Issue 1}, address = {G{\"o}ttingen}, doi = {10.25643/bauhaus-universitaet.4480}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210806-44807}, pages = {1 -- 9}, abstract = {The contribution explores the migratory situation on the Balkans and more specifically in the so-called Refugee District in Belgrade from a spatial perspective. By visualizing the areas of tensions in the Refugee District, the city of Belgrade, Serbia and Europe it aims to disentangle the political and socio-spatial levels that lead to the stuck situation of in-betweenness at the gates of the European Union.}, subject = {Europ{\"a}ische Union}, language = {en} } @article{CerejeirasKaehlerLegatiuketal., author = {Cerejeiras, Paula and K{\"a}hler, Uwe and Legatiuk, Anastasiia and Legatiuk, Dmitrii}, title = {Discrete Hardy Spaces for Bounded Domains in Rn}, series = {Complex Analysis and Operator Theory}, volume = {2021}, journal = {Complex Analysis and Operator Theory}, number = {Volume 15, article 4}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s11785-020-01047-6}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44746}, pages = {1 -- 32}, abstract = {Discrete function theory in higher-dimensional setting has been in active development since many years. However, available results focus on studying discrete setting for such canonical domains as half-space, while the case of bounded domains generally remained unconsidered. Therefore, this paper presents the extension of the higher-dimensional function theory to the case of arbitrary bounded domains in Rn. On this way, discrete Stokes' formula, discrete Borel-Pompeiu formula, as well as discrete Hardy spaces for general bounded domains are constructed. Finally, several discrete Hilbert problems are considered.}, subject = {Dirac-Operator}, language = {en} } @article{TutalPartschefeldSchneideretal., author = {Tutal, Adrian and Partschefeld, Stephan and Schneider, Jens and Osburg, Andrea}, title = {Effects of Bio-Based Plasticizers, Made From Starch, on the Properties of Fresh and Hardened Metakaolin-Geopolymer Mortar: Basic Investigations}, series = {Clays and Clay Minerals}, volume = {2020}, journal = {Clays and Clay Minerals}, number = {volume 68, No. 5}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s42860-020-00084-8}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44737}, pages = {413 -- 427}, abstract = {Conventional superplasticizers based on polycarboxylate ether (PCE) show an intolerance to clay minerals due to intercalation of their polyethylene glycol (PEG) side chains into the interlayers of the clay mineral. An intolerance to very basic media is also known. This makes PCE an unsuitable choice as a superplasticizer for geopolymers. Bio-based superplasticizers derived from starch showed comparable effects to PCE in a cementitious system. The aim of the present study was to determine if starch superplasticizers (SSPs) could be a suitable additive for geopolymers by carrying out basic investigations with respect to slump, hardening, compressive and flexural strength, shrinkage, and porosity. Four SSPs were synthesized, differing in charge polarity and specific charge density. Two conventional PCE superplasticizers, differing in terms of molecular structure, were also included in this study. The results revealed that SSPs improved the slump of a metakaolin-based geopolymer (MK-geopolymer) mortar while the PCE investigated showed no improvement. The impact of superplasticizers on early hardening (up to 72 h) was negligible. Less linear shrinkage over the course of 56 days was seen for all samples in comparison with the reference. Compressive strengths of SSP specimens tested after 7 and 28 days of curing were comparable to the reference, while PCE led to a decline. The SSPs had a small impact on porosity with a shift to the formation of more gel pores while PCE caused an increase in porosity. Throughout this research, SSPs were identified as promising superplasticizers for MK-geopolymer mortar and concrete.}, subject = {Geopolymere}, language = {en} } @article{SchirmerOsburg, author = {Schirmer, Ulrike and Osburg, Andrea}, title = {A new method for the quantification of adsorbed styrene acrylate copolymer particles on cementitious surfaces: a critical comparative study}, series = {SN Applied Sciences}, volume = {2020}, journal = {SN Applied Sciences}, number = {Volume 2, article 2061}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s42452-020-03825-5}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44729}, pages = {1 -- 11}, abstract = {The amount of adsorbed styrene acrylate copolymer (SA) particles on cementitious surfaces at the early stage of hydration was quantitatively determined using three different methodological approaches: the depletion method, the visible spectrophotometry (VIS) and the thermo-gravimetry coupled with mass spectrometry (TG-MS). Considering the advantages and disadvantages of each method, including the respectively required sample preparation, the results for four polymer-modified cement pastes, varying in polymer content and cement fineness, were evaluated. To some extent, significant discrepancies in the adsorption degrees were observed. There is a tendency that significantly lower amounts of adsorbed polymers were identified using TG-MS compared to values determined with the depletion method. Spectrophotometrically generated values were ​​lying in between these extremes. This tendency was found for three of the four cement pastes examined and is originated in sample preparation and methodical limitations. The main influencing factor is the falsification of the polymer concentration in the liquid phase during centrifugation. Interactions in the interface between sediment and supernatant are the cause. The newly developed method, using TG-MS for the quantification of SA particles, proved to be suitable for dealing with these revealed issues. Here, instead of the fluid phase, the sediment is examined with regard to the polymer content, on which the influence of centrifugation is considerably lower.}, subject = {Zement}, language = {en} } @misc{Coenen, author = {Coenen, Ekkehard}, title = {Hans Ruin: Being with the Dead—Burial, ancestral politics, and the roots of historical consciousness}, series = {Human Studies}, volume = {2020}, journal = {Human Studies}, number = {Volume 43}, publisher = {Springer}, address = {Heidelberg}, doi = {10.1007/s10746-020-09565-0}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20210804-44712}, pages = {683 -- 689}, abstract = {How can society be thought of as something in which the living and the dead interact throughout history? In Being with the Dead. Burial, Ancestral Politics, and the Roots of Historical Consciousness, Hans Ruin turns to the relationship between the living and the dead as well as 'historical consciousness'. He is referring to the expression 'being with the dead' (Mitsein mit dem Toten). Rather en passant, Martin Heidegger (1962: 282) shaped this existential-ontological term, which so far has hardly received any consideration. But for Ruin, it now forms the starting point for his "expanded phenomenological social ontology" (p. XI). By illuminating history and historical consciousness with the category 'being with the dead,' he gains remarkable insights into the meaning of ancestrality. Concerning 'necropolitics,' Ruin shows that the political space includes the living as well as the dead and how they constitute it. The foci of his considerations are the human sciences, above all sociology, anthropology, archaeology, philology and history. Ruin's book aims at a "metacritical thanatology," which he elaborates as "an exploration of the social ontology of being with the dead mediated through critical analyses of the human-historical sciences themselves" (p. XII). As a result, in a total of seven chapters, he succeeds astonishingly in emphasizing the political and ethical importance of a scientific gaze that cultivates the interaction of the living and the dead.}, subject = {Geschichtswissenschaft}, language = {en} }