@phdthesis{Zierold2004,
  author    = {Zierold, Sabine},
  title     = {Der mediale Raum der Architektur},
  doi       = {10.25643/bauhaus-universitaet.767},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20060806-8106},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  year      = {2004},
  abstract  = {Der architektonische Raum wird als ein Medium der Kommunikation im Kontext der >neuen< Medien begriffen, aus der Erkenntnis, dass er schon immer ein Medium war und aus einer komplexen Medienstruktur in Abh{\"a}ngigkeit von anderen Medien besteht. Im Prozess von Handlung und Kommunikation ist der architektonische Raum das Medium, das r{\"a}umliche N{\"a}he von Individuen {\"u}ber alle Sinne und das Bewusstsein gleichzeitig intensiv erm{\"o}glicht. Der architektonische Raum als immersives Kommunikationsmedium erreicht im Zeitalter der >neuen< Medien eine neue Dimension, indem mehr und andere Wirklichkeitsalternativen der Kommunikation zur Verf{\"u}gung stehen. N. Luhmann folgend, wird die Architektur aus der Sicht der Form/Medium-Differenz systemtheoretisch als strukturierter M{\"o}glichkeitsraum betrachtet. Der Raum ist das Medium f{\"u}r Formen des architektonischen Raumes, in dem Architektur {\"u}berhaupt erst wirksam wird. Umgekehrt sind die Formen des architektonischen Raumes Medien f{\"u}r die Wahrnehmung einer Vielzahl von r{\"a}umlichen Wirklichkeiten. Eine Fassade aus Stein oder Glas ist gebaute Form und kann als Medium Information kommunizieren. Medien werden ihrer Bestimmung um so besser gerecht, je mehr sie sich der Aufmerksamkeit entziehen und wie transparente Fenster hinter der Oberfl{\"a}che der sinnlichen Wahrnehmung zur{\"u}cktreten. Als >unwahrnehmbares< Medium ist der architektonische Raum damit eine hintergr{\"u}ndige >Wirkungsmacht<, eine B{\"u}hne f{\"u}r die Entfaltung von Wirkung, Atmosph{\"a}re und Bewegung. Seine physische Wirklichkeit war schon immer durch virtuelle Wirklichkeiten oder Realit{\"a}ten entgrenzt, die durch Techniken und Technologien der Simulation als k{\"u}nstliche Welten wahrnehmbar und kommunizierbar werden. Dies kann an tradierten Beispielen der gotischen Kathedrale, dem Panorama, den panoptischen R{\"a}umen, dem Theater, Kino oder den kontinuierlichen R{\"a}umen von der Moderne bis heute aufgezeigt weren. Virtuelle R{\"a}ume gotischer Glasbilder oder barocker Decken- und Wandbilder im Medium des architektonischen Raumes sind uns gel{\"a}ufig. Die Immersion, das Eintauchen in diese virtuellen Wirklichkeitssp{\"a}ren l{\"o}st die Wahrnehmung der eigenen k{\"o}rperlichen Pr{\"a}senz in ihnen aus. Das Potential des virtuellen Raumes der Architektur besteht im Vergleich zu anderen virtuellen Realit{\"a}ten von Text, Bild oder digitalen Medien in seiner Gebundenheit an die physische, r{\"a}umliche Reizstruktur, der er die Eindringlichkeit und Komplexit{\"a}t seiner Wirkung verdankt. Es werden unterschiedliche Wechselwirkungen und gemeinsame Entwicklungen von zeitgen{\"o}ssischen Beispielen der Architektur mit den >neuen< Medien aufgezeigt. In der »sensitiven Wand« wird die physische Raumgrenze durch die Integration neuer Techniken und Technologien digitaler, elektronischer Medien etwas extrem Flexibles und Formbares in Interaktion mit dem Benutzer. Der H2O Pavillon (Oosterhuis und NOX, 1997) ist ein Beispiel daf{\"u}r. Der ausgepr{\"a}gt polysensorische Immersionsraum steht f{\"u}r die Einheit von digitaler und architektonischer Simulation. Die metaphorische Welt von H{\"o}hle und Quelle des Thermalbades Vals (P.Zumthor, 1996) ist die r{\"a}umliche Reflexion auf die metaphorische Struktur virtueller R{\"a}ume der >neuen< Medien. Die simulierte Wirklichkeit in den Medien Wasser, Stein und architektonischer Raum produziert sch{\"o}pferisch den polysensorischen immersiven Zugang in die virtuellen Welten >authentischer< physischer Umgebung. Das >Sichtbare< im Medium Raum der Architektur ist ohne das >Unsichtbare< nicht zu begreifen bzw. das sinnlich Wahrnehmbare nicht ohne das Unwahrnehmbare. Das Erkennen dieser Relation von Form und Medium erm{\"o}glicht die Formulierung des neuen Begriffes des medialen Raumes der Architektur, der zur Basis f{\"u}r eine Medientheorie der Architektur wird, als Sichtweise der Entgrenzung des physischen Raumes durch den virtuellen Raum f{\"u}r die subjektive Wahrnehmung, Handlung und Kommunikation.},
  subject      = {Architektur},
  language  = {de}
}
@article{Volkova2004,
  author    = {Volkova, Viktorija},
  title     = {The analysis of dynamic behaviour of pre-stressed systems under polyharmonic excitations},
  doi       = {10.25643/bauhaus-universitaet.265},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2656},
  year      = {2004},
  abstract  = {Pre-stressed structural elements are widely used in large-span structures. As a rule, they have higher stiffness characteristics. Pre-stressed rods can be applied as girders of different purpose, and as their separate parts, e.g. rods of trusses and frames. Among numerous ways of prestressing the compression of girders, trusses, and frames by tightenings from high-strength materials is under common application.},
  subject      = {Verkehrsplanung},
  language  = {en}
}
@article{OsadaKoikeMorimoto2004,
  author    = {Osada, Teppei and Koike, Hirotaka and Morimoto, Akinori},
  title     = {Research on Establishment of a Standard of Traffic Impact Assessment with Integrated Database System},
  doi       = {10.25643/bauhaus-universitaet.264},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2647},
  year      = {2004},
  abstract  = {Planning support systems, such as geographical information system (GIS) and traffic flow simulation models, are widely in use in recent urban planning research. In this paper we propose a method to apply traffic impact assessment (TIA) to large-scale, commercial developments. In TIA research we often encounter the problem of increasing amount of data that is necessary for detailed investigation and analysis, as the scale of commercial developments become larger and more complex. As a result, TIA presents two problems. The first problem is the difficulty of data acquisition. The second problem is the reliability of data. As a solution, we developed an integrated database system.},
  subject      = {Verkehrsplanung},
  language  = {en}
}
@article{Rose2004,
  author    = {Rose, Martin},
  title     = {Modeling of Freeway Traffic},
  doi       = {10.25643/bauhaus-universitaet.263},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2639},
  year      = {2004},
  abstract  = {An integrated modeling of freeway traffic is developed, whose implementation in an uniform computer -aided simulation model facilitate comparative evaluation and systematic coupling of several traffic simulations, traffic controls, traffic measurements and traffic scenarios. The integrated modeling of freeway traffic is a basic mapping of freeway networks, control methods, measurements and different simulations of traffic flow...},
  subject      = {Verkehrsplanung},
  language  = {en}
}
@article{KoikeMorimotoNomura2004,
  author    = {Koike, Hirotaka and Morimoto, Akinori and Nomura, Kazuhiro},
  title     = {Development of Urban Land Use Model to Compare Transit-Oriented and Automobile-Oriented Cities},
  doi       = {10.25643/bauhaus-universitaet.262},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2621},
  year      = {2004},
  abstract  = {This study is an attempt to develop a simple simulation model that can compare the differences between automobile-oriented and transit-oriented cities, and clarify the difference between city forms by transportation modes. Following a theoretical model development, a series of simulation runs are tried. The model allocates people who commute to CBD from residential zones along a transportation corridor. As a result of many simulation analyses, it is shown that automobiles need much more traffic space in comparison with the transit as is shown by the proposed traffic space ratio both in CBD and along the corridor.},
  subject      = {Verkehrsplanung},
  language  = {en}
}
@article{SemenovAlekseevaTarlapan2004,
  author    = {Semenov, Vitaly and Alekseeva, Elena and Tarlapan, Oleg},
  title     = {Virtual Construction using Map-based Approach},
  doi       = {10.25643/bauhaus-universitaet.244},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2447},
  year      = {2004},
  abstract  = {The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility...},
  subject      = {Produktmodell},
  language  = {en}
}
@article{RombergNigglvanTreeck2004,
  author    = {Romberg, Richard and Niggl, Andreas and van Treeck, Christoph},
  title     = {Structural Analysis based on the Product Model Standard IFC},
  doi       = {10.25643/bauhaus-universitaet.243},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2433},
  year      = {2004},
  abstract  = {In this paper we present a computer aided method supporting co-operation between different project partners, such as architects and engineers, on the basis of strictly three-dimensional models. The center of our software architecture is a product model, described by the Industry Foundation Classes (IFC) of the International Alliance for Interoperability (IAI). From this a geometrical model is extracted and automatically transferred to a computational model serving as a basis for various simulation tasks. In this paper the focus is set on the advantage of the fully three-dimensional structural analysis performed by p-version of the finite element analysis. Other simulation methods are discussed in a separate contribution of this Volume (Treeck 2004). The validity of this approach will be shown in a complex example.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{KiviniemiFischer2004,
  author    = {Kiviniemi, Arto and Fischer, Martin},
  title     = {Requirements Management Interface to Building Product Models},
  doi       = {10.25643/bauhaus-universitaet.242},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2427},
  year      = {2004},
  abstract  = {In current AEC practice client requirements are typically recorded in a building program, which, depending on the building type, covers various aspects from the overall goals, activities and spatial needs to very detailed material and condition requirements. This documentation is used as the starting point of the design process, but as the design progresses, it is usually left aside and changes are made incrementally based on the previous design solution. These incremental small changes can lead to a solution that may no longer meet the original requirements. In addition, design is by nature an iterative process and the proposed solutions often also cause evolution in the client requirements. However, the requirements documentation is usually not updated accordingly. Finding the latest updates and evolution of the requirements from the documentation is very difficult, if not impossible. This process can lead to an end result, which is significantly different from the documented requirements. Some important requirements may not be satisfied, and even if the design process was based on agreed-upon changes in the scope and requirements, differences in the requirements documents and in the completed building can lead to well-justified doubts about the quality of the design and construction process...},
  subject      = {Produktmodell},
  language  = {en}
}
@article{HoltzhauerSaal2004,
  author    = {Holtzhauer, Eric and Saal, Helmut},
  title     = {Product modelling in the steel construction domain},
  doi       = {10.25643/bauhaus-universitaet.241},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2415},
  year      = {2004},
  abstract  = {The complexity of the relationships between the actors of a building project requires high efficiency in communication. Among other things, data sharing is crucial. The exchange of data is made possible by interfaces between expert programs, which rely on product models. The latter are neutral standards with formal definitions of building objects and their attributes. This paper deals with the state of the art and the research activities concerning product models in the steel construction domain and the advantages provided by this technology for the sector.},
  subject      = {Produktmodell},
  language  = {en}
}
@article{KangMiranda2004,
  author    = {Kang, Shihchung and Miranda, Eduardo},
  title     = {Physics Based Model for Simulating the Dynamics of Tower Cranes},
  doi       = {10.25643/bauhaus-universitaet.240},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20111215-2409},
  year      = {2004},
  abstract  = {The goal of the research is to increase the understanding of dynamic behaviors during the crane operation, and develops computer-aided methods to improve the training of crane operators. There are approximately 125,000 cranes in operation today in the construction industry, responsible for major portion of erection activities. Unfortunately, many accidents occur every year in the U.S. and other countries related to the operation of cranes in construction sites. For example on November 28, 1989 a tower crane collapse during the construction of a building in San Francisco killing four construction workers, one civilian and injuring 28. According to the statistics from Occupational Safety Health Administration (OSHA), there were 137 crane-related fatalities from 1992 to 2001 in the US. A well-known internet website that keeps track of crane-related accidents (craneaccidents.com), reports 516 accidents and 277 fatalities from 2000 to 2002. These statistics show that even though many measures have been taken to decrease the number of crane-related accidents (Braam, 2002), the number of crane related accidents is still very large. It is important to recognize that each construction related fatality is not only a great human loss but also increases the costs of insurance, lawsuits, and the construction budget due to delay of a project (Paulson 1992)...},
  subject      = {Produktmodell},
  language  = {en}
}