@misc{Abebe2008, type = {Master Thesis}, author = {Abebe, Beka Hailu}, title = {Fatigue Life Assessment of Diesel Engine Pump Part}, doi = {10.25643/bauhaus-universitaet.1359}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20081027-14331}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2008}, abstract = {The intention of this thesis is first, to determine material constants of ductile cast irons (EN-GJS-400-15,EN-GJS-500-7, EN-GJS-600-3) for estimating fatigue damage. These constants are obtained from experimental results. These results are stress versus strain tests, strain versus crack initiation life tests,and consequently, Smith, Watson and Topper damage parameter, PSWT can be calculated. Using data fitting, the constants can be estimated, thus Uniform Material Law for ductile cast irons is fulfilled. Endurance limit stress is obtained based on research report termed Synthetic W{\"o}hler Lines(SWL).It is found out that the endurance limit stress is a function of yield limit stress. Endurance life cycle is set as three millions for the three materials. Secondly, fatigue life assessment is done for diesel engine pump part made of the three ductile cast irons. Finite element calculation is done to get elastic stress concentration factor, Kt, and plastic notch factor Kp. Neuber ´s rule is used to determine local stress at notch subjected to constant amplitude load test and variable amplitude loading. The constant amplitude loading is conducted at a stress ratio of R=0 on the pump part. The test results show that fatigue life assessment based on the material constants is accurate. On the basis of the accuracy of constant amplitude test results, it is possible to determine for fatigue life for variable amplitude loading which is the real loading on the pump part. The variable amplitude loading is normally standardized for computational efficiency. This standardized loading is termed as CORAL (COmmon RAil Loading) sequence. CORAL is used to calculate fatigue life of pump part and is inputted to a Fatigue Life Evaluation computer program. This program uses rain flow cycle counting method. It can be concluded that the material constants for ductile cast irons fit well which is proved by experimental tests by constant amplitude loading on pump part. Then life prediction can be done for the typical pump loading, standardized variable amplitude loading known as CORAL}, subject = {Materialerm{\"u}dung}, language = {en} } @misc{Jacobs2008, type = {Master Thesis}, author = {Jacobs, Dietlind}, title = {Experimentelle Ermittlung der Filtercharakteristik eines nichtbindigen Bodens und Vergleich mit analytischen Ans{\"a}tzen}, doi = {10.25643/bauhaus-universitaet.1349}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20080922-14248}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2008}, abstract = {Aus den beidseitigen Wassereinstau von Flussdeichen, resultieren neue Belastungssituationen innerhalb eines Flussdeiches. Die neu eintretenden Wechselwirkungen von Erdstoffschichten mit der Sickerstr{\"o}mung k{\"o}nnen an der Grenzschicht von einer bindigen zu einer nichtbindigen Erdstoffschicht zum Materialtransport f{\"u}hren. Der Austrag von Feinmaterial aus der Dichtungsschicht (Basisschicht) kann mit Erdstofffiltern (Filterschicht) bestimmter Kornzusammensetzung verhindert werden. Bei diesem Vorgang wird das feine Material bei Durchstr{\"o}mung der Filterschicht an der Oberfl{\"a}che bzw. im Inneren einer Filterschicht abgetrennt bzw. am Transportvorgang zur{\"u}ckgehalten. In dieser Forschungsarbeit wurden durch Versuche die Ans{\"a}tze zur geometrische Stabilit{\"a}t herausgearbeitet. Die Auswertung der Versuchsergebnisse bezog sich auf die initiale Wasserdurchl{\"a}ssigkeit, auf die Filtercharakteristik sowie die Wasserdurchl{\"a}ssigkeit bei Suspensionsstr{\"o}mung und die Betrachtung der geometrischen Stabilit{\"a}t des Systems aus Suspension und Filter.}, subject = {Erosion}, language = {de} } @misc{Korkmaz2008, type = {Master Thesis}, author = {Korkmaz, Sinan}, title = {Extension of the Uniform Material Law for High Strength Steels}, doi = {10.25643/bauhaus-universitaet.1387}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20090602-14718}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2008}, abstract = {Uniform Material Law (UML) is a handy and user-friendly method since only the tensile strength data of the material is needed for estimation of the strain-life curve, in contrast to other methods, such as four-point correlation method, universal slopes method, Mitchell's method, modified universal slopes method, which also require the data of the reduction in area or the fracture ductility of the material. On the other hand, the error level of UML estimations can be still decreased by refining the method. The objective of this thesis is putting forward a more refined method by extending conventional UML. Furthermore, a life prediction computation is carried out with the proposed extended UML and the results are compared to that of the conventional method. The results have proven that the maximum error is dropped down to 0.59\% from 38\% with the proposed extended UML method.}, subject = {Materialerm{\"u}dung}, language = {en} } @misc{Rauch2008, type = {Master Thesis}, author = {Rauch, Kristin}, title = {Simulation - Termincontrolling beim Bau einer Br{\"u}ckenkappe}, doi = {10.25643/bauhaus-universitaet.1362}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20081111-14414}, school = {Bauhaus-Universit{\"a}t Weimar}, year = {2008}, abstract = {Die Simulation ist vor allem in der Forschung und Wissenschaft ein bekanntes Ver-fahren zur Untersuchung von dynamischen Prozessen. Fachgebiete wie u.a. die Medizin und Biologie, das Verkehrswesen, die Automobilindustrie, die Meteorologie und die Fertigungstechnik gewinnen neue Erkenntnisse aus dem Einsatz derartiger Analyseverfahren. Gr{\"u}nde f{\"u}r die Anwendung von Computersimulationen erstrecken sich von finanziellen und zeitlichen Aspekten {\"u}ber eine Risikoverringerung bis hin zu einer vereinfachten Vorgehensweise. Nicht in allen Bereichen aber werden die viel-seitigen Vorteile von Simulationsmethoden genutzt. In der Baubranche wird Simulation derzeit nur ansatzweise eingesetzt. Doch vor al-lem Baustellen bieten durch den zunehmenden Kosten- und Termindruck sowie viel-seitige andere Einfl{\"u}sse eine gute Basis f{\"u}r die Anwendung von Simulationsmetho-den. Der Bauablauf kann dadurch besser kontrolliert und gesteuert werden. In der Planungsphase von Bauprojekten wird Simulation bereits in Grundz{\"u}gen f{\"u}r die Op-timierung von Bauablauf- und Logistikprozessen genutzt. Allerdings ist besonders die Ausf{\"u}hrungsphase durch St{\"o}rungen und {\"A}nderungen gepr{\"a}gt, sodass hier Simu-lationsmethoden noch effektiver eingesetzt werden k{\"o}nnen. Im Rahmen dieser Arbeit sollen die Einsatzm{\"o}glichkeiten von Simulationsmethoden f{\"u}r die Optimierung des Termincontrollings untersucht werden. Durch das Aufzeigen verschiedener Methoden sowie einem Vergleich {\"u}ber ihre Vor- und Nachteile wird herausgefiltert, welches Simulationswerkzeug am effektivsten im Termincontrolling eingesetzt werden kann. Ein weiteres Ziel dieser Arbeit ist die Modellierung eines Beispielprozesses anhand eines ausgew{\"a}hlten Simulationsverfahrens. Die Herstellung einer Br{\"u}ckenkappe wird in diesem Zusammenhang umfangreich dargestellt und analysiert. Eventuelle Zwangspunkte bei der Umsetzung und verschiedene L{\"o}sungsm{\"o}glichkeiten werden aufgezeigt.}, subject = {Simulation}, language = {de} }