@techreport{KoenigTapiasSchmitt,
  author    = {K{\"o}nig, Reinhard and Tapias, Estefania and Schmitt, Gerhard},
  title     = {New Methods in Urban Analysis and Simulation: Documentation of teaching results from the spring semester 2015},
  organization    = {ETH Zurich},
  doi       = {10.25643/bauhaus-universitaet.2505},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25052},
  pages     = {76},
  abstract  = {Documentation of teaching results from the spring semester 2015 at the chair of Information Architecture at ETH Zurich},
  subject      = {Architektur},
  language  = {en}
}
@article{VuBacSilaniLahmeretal.,
  author    = {Vu-Bac, N. and Silani, Mohammad and Lahmer, Tom and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs)},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {520 -- 535},
  abstract  = {A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs)},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{NanthakumarLahmerZhuangetal.,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Zhuang, Xiaoying and Zi, Goangseup and Rabczuk, Timon},
  title     = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  series = {Inverse Problems in Science and Engineering},
  journal   = {Inverse Problems in Science and Engineering},
  abstract  = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{VuBacRafieeZhuangetal.,
  author    = {Vu-Bac, N. and Rafiee, Roham and Zhuang, Xiaoying and Lahmer, Tom and Rabczuk, Timon},
  title     = {Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters},
  series = {Composites Part B: Engineering},
  journal   = {Composites Part B: Engineering},
  pages     = {446 -- 464},
  abstract  = {Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{JaouadiLahmer,
  author    = {Jaouadi, Zouhour and Lahmer, Tom},
  title     = {Topology optimization of structures subjected to multiple load cases by introducing the Epsilon constraint method},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2804},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28042},
  pages     = {7},
  abstract  = {A topology optimization method has been developed for structures subjected to multiple load cases (Example of a bridge pier subjected to wind loads, traffic, superstructure...). We formulate the problem as a multi-criterial optimization problem, where the compliance is computed for each load case. Then, the Epsilon constraint method (method proposed by Chankong and Haimes, 1971) is adapted. The strategy of this method is based on the concept of minimizing the maximum compliance resulting from the critical load case while the other remaining compliances are considered in the constraints. In each iteration, the compliances of all load cases are computed and only the maximum one is minimized. The topology optimization process is switching from one load to another according to the variation of the resulting compliance. In this work we will motivate and explain the proposed methodology and provide some numerical examples.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@phdthesis{Vu,
  author    = {Vu, Bac Nam},
  title     = {Stochastic uncertainty quantification for multiscale modeling of polymeric nanocomposites},
  doi       = {10.25643/bauhaus-universitaet.2555},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160322-25551},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {265},
  abstract  = {Nanostructured materials are extensively applied in many fields of material science for new industrial applications, particularly in the automotive, aerospace industry due to their exceptional physical and mechanical properties. Experimental testing of nanomaterials is expensive, timeconsuming,challenging and sometimes unfeasible. Therefore,computational simulations have been employed as alternative method to predict macroscopic material properties. The behavior of polymeric nanocomposites (PNCs) are highly complex. The origins of macroscopic material properties reside in the properties and interactions taking place on finer scales. It is therefore essential to use multiscale modeling strategy to properly account for all large length and time scales associated with these material systems, which across many orders of magnitude. Numerous multiscale models of PNCs have been established, however, most of them connect only two scales. There are a few multiscale models for PNCs bridging four length scales (nano-, micro-, meso- and macro-scales). In addition, nanomaterials are stochastic in nature and the prediction of macroscopic mechanical properties are influenced by many factors such as fine-scale features. The predicted mechanical properties obtained by traditional approaches significantly deviate from the measured values in experiments due to neglecting uncertainty of material features. This discrepancy is indicated that the effective macroscopic properties of materials are highly sensitive to various sources of uncertainty, such as loading and boundary conditions and material characteristics, etc., while very few stochastic multiscale models for PNCs have been developed. Therefore, it is essential to construct PNC models within the framework of stochastic modeling and quantify the stochastic effect of the input parameters on the macroscopic mechanical properties of those materials. This study aims to develop computational models at four length scales (nano-, micro-, meso- and macro-scales) and hierarchical upscaling approaches bridging length scales from nano- to macro-scales. A framework for uncertainty quantification (UQ) applied to predict the mechanical properties of the PNCs in dependence of material features at different scales is studied. Sensitivity and uncertainty analysis are of great helps in quantifying the effect of input parameters, considering both main and interaction effects, on the mechanical properties of the PNCs. To achieve this major goal, the following tasks are carried out: At nano-scale, molecular dynamics (MD) were used to investigate deformation mechanism of glassy amorphous polyethylene (PE) in dependence of temperature and strain rate. Steered molecular dynamics (SMD)were also employed to investigate interfacial characteristic of the PNCs. At mico-scale, we developed an atomistic-based continuum model represented by a representative volume element (RVE) in which the SWNT's properties and the SWNT/polymer interphase are modeled at nano-scale, the surrounding polymer matrix is modeled by solid elements. Then, a two-parameter model was employed at meso-scale. A hierarchical multiscale approach has been developed to obtain the structure-property relations at one length scale and transfer the effect to the higher length scales. In particular, we homogenized the RVE into an equivalent fiber. The equivalent fiber was then employed in a micromechanical analysis (i.e. Mori-Tanaka model) to predict the effective macroscopic properties of the PNC. Furthermore, an averaging homogenization process was also used to obtain the effective stiffness of the PCN at meso-scale. Stochastic modeling and uncertainty quantification consist of the following ingredients: - Simple random sampling, Latin hypercube sampling, Sobol' quasirandom sequences, Iman and Conover's method (inducing correlation in Latin hypercube sampling) are employed to generate independent and dependent sample data, respectively. - Surrogate models, such as polynomial regression, moving least squares (MLS), hybrid method combining polynomial regression and MLS, Kriging regression, and penalized spline regression, are employed as an approximation of a mechanical model. The advantage of the surrogate models is the high computational efficiency and robust as they can be constructed from a limited amount of available data. - Global sensitivity analysis (SA) methods, such as variance-based methods for models with independent and dependent input parameters, Fourier-based techniques for performing variance-based methods and partial derivatives, elementary effects in the context of local SA, are used to quantify the effects of input parameters and their interactions on the mechanical properties of the PNCs. A bootstrap technique is used to assess the robustness of the global SA methods with respect to their performance. In addition, the probability distribution of mechanical properties are determined by using the probability plot method. The upper and lower bounds of the predicted Young's modulus according to 95 \% prediction intervals were provided. The above-mentioned methods study on the behaviour of intact materials. Novel numerical methods such as a node-based smoothed extended finite element method (NS-XFEM) and an edge-based smoothed phantom node method (ES-Phantom node) were developed for fracture problems. These methods can be used to account for crack at macro-scale for future works. The predicted mechanical properties were validated and verified. They show good agreement with previous experimental and simulations results.},
  subject      = {Polymere},
  language  = {en}
}
@inproceedings{OPUS4-2451,
  title     = {International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2451},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150828-24515},
  pages     = {230},
  abstract  = {The 20th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering will be held at the Bauhaus University Weimar from 20th till 22nd July 2015. Architects, computer scientists, mathematicians, and engineers from all over the world will meet in Weimar for an interdisciplinary exchange of experiences, to report on their results in research, development and practice and to discuss. The conference covers a broad range of research areas: numerical analysis, function theoretic methods, partial differential equations, continuum mechanics, engineering applications, coupled problems, computer sciences, and related topics. Several plenary lectures in aforementioned areas will take place during the conference. We invite architects, engineers, designers, computer scientists, mathematicians, planners, project managers, and software developers from business, science and research to participate in the conference!},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{MsekhSargadoJamshidianetal.,
  author    = {Msekh, Mohammed Abdulrazzak and Sargado, M. and Jamshidian, M. and Areias, Pedro and Rabczuk, Timon},
  title     = {ABAQUS implementation of phase_field model for brittle fracture},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {472 -- 484},
  abstract  = {ABAQUS implementation of phase_field model for brittle fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoLuRabczuk,
  author    = {Zhao, Jiyun and Lu, Lixin and Rabczuk, Timon},
  title     = {The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {567 -- 572},
  abstract  = {The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{Koenig,
  author    = {K{\"o}nig, Reinhard},
  title     = {CPlan: An Open Source Library for Computational Analysis and Synthesis},
  series = {33rd eCAADe Conference},
  booktitle = {33rd eCAADe Conference},
  editor    = {Martens, Bob and Wurzer, G, Gabriel and Grasl, Tomas and Lorenz, Wolfgang and Schaffranek, Richard},
  publisher = {Vienna University of Technology},
  address   = {Vienna},
  doi       = {10.25643/bauhaus-universitaet.2503},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25037},
  pages     = {245 -- 250},
  abstract  = {Some caad packages offer additional support for the optimization of spatial configurations, but the possibilities for applying optimization are usually limited either by the complexity of the data model or by the constraints of the underlying caad system. Since we missed a system that allows to experiment with optimization techniques for the synthesis of spatial configurations, we developed a collection of methods over the past years. This collection is now combined in the presented open source library for computational planning synthesis, called CPlan. The aim of the library is to provide an easy to use programming framework with a flat learning curve for people with basic programming knowledge. It offers an extensible structure that allows to add new customized parts for various purposes. In this paper the existing functionality of the CPlan library is described.},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{TanLahmerSiddappa,
  author    = {Tan, Fengjie and Lahmer, Tom and Siddappa, Manju Gyaraganahalll},
  title     = {SECTION OPTIMIZATION AND RELIABILITY ANALYSIS OF ARCH-TYPE DAMS INCLUDING COUPLED MECHANICAL-THERMAL AND HYDRAULIC FIELDS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2821},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28212},
  pages     = {8},
  abstract  = {From the design experiences of arch dams in the past, it has significant practical value to carry out the shape optimization of arch dams, which can fully make use of material characteristics and reduce the cost of constructions. Suitable variables need to be chosen to formulate the objective function, e.g. to minimize the total volume of the arch dam. Additionally a series of constraints are derived and a reasonable and convenient penalty function has been formed, which can easily enforce the characteristics of constraints and optimal design. For the optimization method, a Genetic Algorithm is adopted to perform a global search. Simultaneously, ANSYS is used to do the mechanical analysis under the coupling of thermal and hydraulic loads. One of the constraints of the newly designed dam is to fulfill requirements on the structural safety. Therefore, a reliability analysis is applied to offer a good decision supporting for matters concerning predictions of both safety and service life of the arch dam. By this, the key factors which would influence the stability and safety of arch dam significantly can be acquired, and supply a good way to take preventive measures to prolong ate the service life of an arch dam and enhances the safety of structure.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{AnitescuJiaZhangetal.,
  author    = {Anitescu, Cosmin and Jia, Yue and Zhang, Yongjie and Rabczuk, Timon},
  title     = {An isogeometric collocation method using superconvergent points},
  series = {Computer Methods in Applied Mechanics and Engineer-ing},
  journal   = {Computer Methods in Applied Mechanics and Engineer-ing},
  pages     = {1073 -- 1097},
  abstract  = {An isogeometric collocation method using superconvergent points},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Sowoidnich,
  author    = {Sowoidnich, Thomas},
  title     = {A Study of Retarding Effects on Cement and Tricalcium Silicate Hydration induced by Superplasticizers},
  isbn      = {978-3-00-052204-8},
  doi       = {10.25643/bauhaus-universitaet.2544},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160224-25444},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {214},
  abstract  = {Fließmittel werden in Betonen verwendet, um deren Fließeigenschaften w{\"a}hrend der Verarbeitung zu verbessern und Wasser einzusparen. Beide Faktoren beeinflussen nicht nur den Frischbeton, sondern auch signifikant die Festbetoneigenschaften. Nachteilig wirken sich Fließmittel auf die Festigkeitsentwicklung aus, die z.T. sehr stark verz{\"o}gert wird. Dies ist vor allem bei Bauteilen, die im Rahmen eines Vorfertigungsprozesses hergestellt werden, ein {\"o}konomischer Nachteil. Die vorliegende Arbeit widmet sich den Ursachen f{\"u}r die Verz{\"o}gerung der Portlandzementhydratation bei Verwendung von Fließmitteln. Um die komplexen Reaktionen, die w{\"a}hrend der Portlandzementhydratation auftreten, zu vereinfachen, betrachtet ein {\"u}berwiegender Teil der Arbeit die Wechselwirkung Fließmittel-Tricalciumsilikat (Abk. Ca3SiO5 oder C3S, Hauptbestandteil von Portlandzementklinker). Die Untersuchungen werden in drei Hauptteilen durchgef{\"u}hrt, wobei Methoden wie u.a. isotherme W{\"a}rmeflusskalorimetrie, Elektrische Leitf{\"a}higkeit, Elektronenmikroskopie, ICP-OES, TOC als auch Analytische Ultrazentrifugation Anwendung finden. Basierend auf der Wechselwirkung von Kationen mit anionischen Ladungstr{\"a}gern von Polymeren wird die Interaktion von Calcium mit Fließmitteln im ersten Teil der Arbeit untersucht. Dabei kommt es {\"u}berwiegend zur Komplexierung von Calciumionen durch die funktionellen Gruppen der Plymere (Carboxyl- bzw. Sulfonguppen), die in zement{\"a}ren Umgebungen sowohl gel{\"o}st in der w{\"a}ssrigen Phase als auch als Bestandteil von Partikelgrenzfl{\"a}chen vorhanden sind. Neben diesen Effekten kann auch gezeigt werden, dass Fließmittel die Bildung von nanoskaligen Partikeln hervorrufen, die infolge der sterischen Wirkung von Fließmitteln dispergiert in der w{\"a}ssrigen Phase vorliegen (Clusterbildung). Analog zu neuesten Erkenntnissen aus dem Bereich der Biomineralisation ist daher davon auszugehen, dass diese Nanopartikel durch Agglomeration das Kristallwachtsum beeinflussen. Ausgehend von der Annahme, dass die Aufl{\"o}sungs- und/ oder F{\"a}llungskinetik durch die Wirkung von Fließmitteln behindert und damit f{\"u}r den Verz{\"o}gerungseffekt der Fließmittel w{\"a}hrend der komplexen Hydratationsreaktion verantwortlich seien k{\"o}nnen, werden die zugrundeliegenden Vorg{\"a}nge im zweiten Abschnitt getrennt voneinander untersucht. Es wird anhand von L{\"o}sungsuntersuchungen an C-S-H Phasen und Portlandit herausgestellt, dass die Komplexierung von gel{\"o}sten Calciumionen durch funktionelle Gruppen der Polymere die L{\"o}slichkeit von Portlandit erh{\"o}ht. Im Gegensatz f{\"u}hrt die Komplexierung von Calciumionen in der w{\"a}ssrigen Phase zu einer Verringerung der Calciumionenkonzentration in der w{\"a}ssrigen Phase. Diese Effekte werden auf die unterschiedlich starke Adsorptionsneigung der Polymere an C-S-H-Phasen und Portlandit zur{\"u}ckgef{\"u}hrt. Es wird davon ausgegangen, dass die Adsorption aufgrund der gr{\"o}ßeren spezifischen Oberfl{\"a}che st{\"a}rker an den C-S-H-Phasen als am Portlandit auftritt. Demnach stellt sich dar, dass die Polymere erst nachdem die funktionellen Gruppen Calciumionen aus der w{\"a}ssrigen Phase komplexiert haben an den C-S-H-Phasen adsorbieren. Weiterhin kann gezeigt werden, dass die freie C3S Aufl{\"o}sungsrate in Anwesenheit von Fließmitteln keinen direkten Zusammenhang zur Verz{\"o}gerung erkennen l{\"a}sst. Teilweise kommt es zu einer in Bezug zur Kontrollprobe ohne Fließmittel erh{\"o}hten sowie auch verringerten Aufl{\"o}sungsrate. Wird das Komplexierungsvem{\"o}gen der Fließmittel ber{\"u}cksichtigt, so kann durchaus eine verlangsamte freie Aufl{\"o}sungsrate ermittelt werden. Doch auch Calcit zeigt einen verz{\"o}gernden Einfluss auf die freie C3S Aufl{\"o}sung, obwohl es den Gesamtprozess der Hydratation signifikant beschleunigt. Somit kann die behinderte Aufl{\"o}sung als m{\"o}gliche Ursache f{\"u}r die verz{\"o}gernde Wirkung w{\"a}hrend der Zementhydratation weder best{\"a}tigt noch widerlegt werden. Dieser Punkt sollte in zuk{\"u}nftigen Arbeiten weiter untersucht werden. Im letzten Schritt dieses Untersuchungsabschnitts wird die reine Kristallisation von C-S-H-Phasen und Portlandit untersucht. Es stellt sich heraus, dass Fließmittel insbesondere durch die Wirkung der Komplexierung von Ionen in der w{\"a}ssrigen Phase sowohl die Induktionszeit verl{\"a}ngern als auch die Kristallwachstumsrate ver{\"a}ndern. Dies allein kann aber nicht die komplette Verz{\"o}gerungswirkung erkl{\"a}ren. Ein wichtiger Verz{\"o}gerungsfaktor ist die Adsorption der Polymere an Kristalloberfl{\"a}chen als auch eine fließmittelbedingte Dispergierung von nanoskaligen Einzelpartikeln, die deren Agglomeration zu Kristallen behindert. Im letzten Hauptuntersuchungsabschnitt werden die gewonnenen Erkenntnisse auf die w{\"a}hrend der Zement- und Tricalciumsilikathydratation parallel ablaufenden Reaktionen analysiert. Dabei wird insbesondere die ionische Zusammensetzung der w{\"a}ssrigen Phase von C3S Pasten und Suspensionen untersucht, um Hinweise f{\"u}r eine kinetische Hemmung der Hydratationsreaktion zu identifizieren. Zusammenfassend wird festgestellt, dass die Ursachen der verz{\"o}gernden Wirkung von Fließmitteln auf die Hydratation von C3S auf die starke Verz{\"o}gerung der Kristallisation von Hydratphasen zur{\"u}ckzuf{\"u}hren ist. Dabei kommt den zwei Faktoren Komplexierung von Calciumionen an Oberfl{\"a}chen und Stabilisierung von nanoskaligen Partikeln eine zentrale Bedeutung zu. Diese Effekte k{\"o}nnen durch die Wirkung als Templat als auch durch Erh{\"o}hung der L{\"o}slichkeit infolge Komplexierung freier/gel{\"o}ster Ionen teilkompensiert werden. Dass die Aufl{\"o}sungsreaktion durch die Anwesenheit von Fließmitteln behindert wird, kann nur indirekt anhand der Entwicklung von Ionenkonzentrationen festgestellt werden. Ob dieser Vorgang die Ursache oder die Folge des L{\"o}sungs-F{\"a}llungs-Mechanismus der Hydratation ist und damit die verz{\"o}gernde Wirkung durch behinderte Aufl{\"o}sung des Edukts hervorgerufen wird, bleibt Gegenstand weiterer Untersuchungen. Im Rahmen der Arbeit kann auch gezeigt werden, dass Fließmittel chemisch als Inhibitoren wirken indem sie den Frequenzfaktor verringern. Dar{\"u}ber hinaus wird erstmalig eine Methode entwickelt, die die Bestimmung der Ionenkonzentration in Pasten in-situ erlaubt. Mit deren Hilfe wird dargestellt, dass die Entwicklung der Ionenkonzentration als auch die allgemein verwendete W{\"a}rmefreisetzungsrate (Kalorimetrie) miteinander korrespondiert. Dar{\"u}ber hinaus erlaubt die entwickelte Methode die weitere Differenzierung der Accelerationsperiode in drei Stadien. Die Kristallisation von C-S-H-Phasen und Portlandit ist f{\"u}r den Beginn der Haupthydratationsperiode entscheidend.},
  subject      = {Cement},
  language  = {en}
}
@article{AreiasRabczukCesardeSaetal.,
  author    = {Areias, Pedro and Rabczuk, Timon and Cesar de Sa, J.M. and Garcao, J.E.},
  title     = {Finite strain quadrilateral shell using least-squares _t of relative Lagrangian in-plane strains},
  series = {Finite Elements in Analysis and Design},
  journal   = {Finite Elements in Analysis and Design},
  pages     = {26 -- 40},
  abstract  = {Finite strain quadrilateral shell using least-squares _t of relative Lagrangian in-plane strains},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{GhasemiKerfridenBordasetal.,
  author    = {Ghasemi, Hamid and Kerfriden, Pierre and Bordas, St{\´e}phane Pierre Alain and Muthu, Jacob and Zi, Goangseup and Rabczuk, Timon},
  title     = {Interfacial shear stress optimization in sandwich beams with polymeric core using nonuniform distribution of reinforcing ingredients},
  series = {Composite Structures},
  journal   = {Composite Structures},
  pages     = {221 -- 230},
  abstract  = {Interfacial shear stress optimization in sandwich beams with polymeric core using nonuniform distribution of reinforcing ingredients},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{JiaZhangRabczuk,
  author    = {Jia, Yue and Zhang, Yongjie and Rabczuk, Timon},
  title     = {A Novel Dynamic Multilevel Technique for Image Registration},
  series = {Computers and Mathematics with Applications},
  journal   = {Computers and Mathematics with Applications},
  abstract  = {A Novel Dynamic Multilevel Technique for Image Registration},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{AreiasRabczukQueirosdeMeloetal.,
  author    = {Areias, Pedro and Rabczuk, Timon and Queiros de Melo, F. J. M. and Cesar de Sa, J.M.},
  title     = {Coulomb frictional contact by explicit projection in the cone for _nite displacement quasi-static problems},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  pages     = {57 -- 72},
  abstract  = {Coulomb frictional contact by explicit projection in the cone for _nite displacement quasi-static problems},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{SilaniTalebiZiaeiRadetal.,
  author    = {Silani, Mohammad and Talebi, Hossein and Ziaei-Rad, S. and Hamouda, A.M.S. and Zi, Goangseup and Rabczuk, Timon},
  title     = {A three dimensional Extended Arlequin Method for Dynamic Fracture},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {425 -- 431},
  abstract  = {A three dimensional Extended Arlequin Method for Dynamic Fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{IlyaniAkmarKramerRabczuk,
  author    = {Ilyani Akmar, A.B. and Kramer, O. and Rabczuk, Timon},
  title     = {Multi-objective evolutionary optimization of sandwich structures: An evaluation by elitist non-dominated sorting evolution strategy},
  series = {American Journal of Engineering and Applied Sciences},
  journal   = {American Journal of Engineering and Applied Sciences},
  doi       = {10.3844/ajeassp.2015.185.201},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170418-31402},
  pages     = {185 -- 201},
  abstract  = {In this study, an application of evolutionary multi-objective optimization algorithms on the optimization of sandwich structures is presented. The solution strategy is known as Elitist Non-Dominated Sorting Evolution Strategy (ENSES) wherein Evolution Strategies (ES) as Evolutionary Algorithm (EA) in the elitist Non-dominated Sorting Genetic algorithm (NSGA-II) procedure. Evolutionary algorithm seems a compatible approach to resolve multi-objective optimization problems because it is inspired by natural evolution, which closely linked to Artificial Intelligence (AI) techniques and elitism has shown an important factor for improving evolutionary multi-objective search. In order to evaluate the notion of performance by ENSES, the well-known study case of sandwich structures are reconsidered. For Case 1, the goals of the multi-objective optimization are minimization of the deflection and the weight of the sandwich structures. The length, the core and skin thicknesses are the design variables of Case 1. For Case 2, the objective functions are the fabrication cost, the beam weight and the end deflection of the sandwich structures. There are four design variables i.e., the weld height, the weld length, the beam depth and the beam width in Case 2. Numerical results are presented in terms of Paretooptimal solutions for both evaluated cases.},
  subject      = {Optimierung},
  language  = {en}
}
@article{Schuch,
  author    = {Schuch, Kai},
  title     = {Theoretische Modelle zur Beschreibung des Aggregationsprozesses von w{\"a}ssrigen Alkalisilikatsolen (Wasserglas) durch spezielle Gelinitiatoren zum Aufbau von stabilen silikatischen Schichtmaterialien},
  series = {Steuerung des Aggregationsprozesses in w{\"a}ssrigen Alkalisilikatsolendurch spezielle Gelinitiatoren und moderate W{\"a}rmebehandlung zum Aufbau einer stabilen Silikatbeschichtung},
  journal   = {Steuerung des Aggregationsprozesses in w{\"a}ssrigen Alkalisilikatsolendurch spezielle Gelinitiatoren und moderate W{\"a}rmebehandlung zum Aufbau einer stabilen Silikatbeschichtung},
  doi       = {10.25643/bauhaus-universitaet.2480},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20151123-24807},
  abstract  = {In dem Artikel werden die theoretischen Modelle und die Zusammenfassung aus der Dissertation von Kai Schuch, Bauhaus Universit{\"a}t Weimar 2014, zusammengef{\"u}hrt.},
  subject      = {Wasserglas},
  language  = {de}
}
@inproceedings{HartmannSmarslyLahmer,
  author    = {Hartmann, Veronika and Smarsly, Kay and Lahmer, Tom},
  title     = {ROBUST SCHEDULING IN CONSTRUCTION ENGINEERING},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2799},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27994},
  pages     = {5},
  abstract  = {In construction engineering, a schedule's input data, which is usually not exactly known in the planning phase, is considered deterministic when generating the schedule. As a result, construction schedules become unreliable and deadlines are often not met. While the optimization of construction schedules with respect to costs and makespan has been a matter of research in the past decades, the optimization of the robustness of construction schedules has received little attention. In this paper, the effects of uncertainties inherent to the input data of construction schedules are discussed. Possibilities are investigated to improve the reliability of construction schedules by considering alternative processes for certain tasks and by identifying the combination of processes generating the most robust schedule with respect to the makespan of a construction project.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{MortazaviPereiraJiangetal.,
  author    = {Mortazavi, Bohayra and Pereira, Luiz Felipe C. and Jiang, Jin-Wu and Rabczuk, Timon},
  title     = {Modelling heat conduction in polycrystalline hexagonal boron-nitride films},
  series = {Scientific Reports},
  journal   = {Scientific Reports},
  doi       = {10.1038/srep13228},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31534},
  abstract  = {We conducted extensive molecular dynamics simulations to investigate the thermal conductivity of polycrystalline hexagonal boron-nitride (h-BN) films. To this aim, we constructed large atomistic models of polycrystalline h-BN sheets with random and uniform grain configuration. By performing equilibrium molecular dynamics (EMD) simulations, we investigated the influence of the average grain size on the thermal conductivity of polycrystalline h-BN films at various temperatures. Using the EMD results, we constructed finite element models of polycrystalline h-BN sheets to probe the thermal conductivity of samples with larger grain sizes. Our multiscale investigations not only provide a general viewpoint regarding the heat conduction in h-BN films but also propose that polycrystalline h-BN sheets present high thermal conductivity comparable to monocrystalline sheets.},
  subject      = {W{\"a}rmeleitf{\"a}higkeit},
  language  = {en}
}
@article{MortazaviCunibertiRabczuk,
  author    = {Mortazavi, Bohayra and Cuniberti, G. and Rabczuk, Timon},
  title     = {Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {285 -- 289},
  abstract  = {Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{TreyerKleinKoenigetal.,
  author    = {Treyer, Lukas and Klein, Bernhard and K{\"o}nig, Reinhard and Meixner, Christine},
  title     = {Lightweight urban computation interchange (LUCI) system},
  series = {FOSS4G 2015 Conference},
  booktitle = {FOSS4G 2015 Conference},
  publisher = {FOSS4G},
  address   = {Seoul, South Korea},
  doi       = {10.25643/bauhaus-universitaet.2504},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25042},
  pages     = {12},
  abstract  = {In this paper we introduce LUCI, a Lightweight Urban Calculation Interchange system, designed to bring the advantages of a calculation and content co-ordination system to small planning and design groups by the means of an open source middle-ware. The middle-ware focuses on problems typical to urban planning and therefore features a geo-data repository as well as a job runtime administration, to coordinate simulation models and its multiple views. The described system architecture is accompanied by two exemplary use cases that have been used to test and further develop our concepts and implementations.},
  subject      = {Architektur},
  language  = {en}
}
@article{BudarapuNarayanaRammohanetal.,
  author    = {Budarapu, Pattabhi Ramaiah and Narayana, T.S.S. and Rammohan, B. and Rabczuk, Timon},
  title     = {Directionality of sound radiation from rectangular panels},
  series = {Applied Acoustics},
  journal   = {Applied Acoustics},
  pages     = {128 -- 140},
  abstract  = {Directionality of sound radiation from rectangular panels},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{Koenig,
  author    = {K{\"o}nig, Reinhard},
  title     = {Urban Design Synthesis for Building Layouts : Urban Design Synthesis for Building Layouts based on Evolutionary Many-Criteria Optimization},
  series = {International Journal of Architectural Computing},
  journal   = {International Journal of Architectural Computing},
  doi       = {10.1260/1478-0771.13.3-4.257},
  pages     = {257 -- 270},
  abstract  = {When working on urban planning projects there are usually multiple aspects to consider. Often these aspects are contradictory and it is not possible to choose one over the other; instead, they each need to be fulfilled as well as possible. In this situation ideal solutions are not always found because they are either not sought or the problems are regarded as being too complex for human capabilities.To improve this situation we propose complementing traditional design approaches with a design synthesis process based on evolutionary many-criteria optimization methods that can fulfill formalizable design requirements. In addition we show how self-organizing maps can be used to visualize many-dimensional solution spaces in an easily analyzable and comprehensible form.The system is presented using an urban planning scenario for the placement of building volumes.},
  subject      = {Design synthesis},
  language  = {en}
}
@article{ArashRabczukJiang,
  author    = {Arash, Behrouz and Rabczuk, Timon and Jiang, Jin-Wu},
  title     = {Nanoresonators and their applications: a state of the art review},
  series = {Applied Physics Reviews},
  journal   = {Applied Physics Reviews},
  abstract  = {Nanoresonators and their applications: a state of the art review},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{MortazaviRabczuk,
  author    = {Mortazavi, Bohayra and Rabczuk, Timon},
  title     = {Multiscale modeling of heat conduction in graphene laminates},
  series = {Carbon},
  journal   = {Carbon},
  pages     = {1 -- 7},
  abstract  = {Multiscale modeling of heat conduction in graphene laminates},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ThaiNguyenXuanBordasetal.,
  author    = {Thai, Chien H. and Nguyen-Xuan, Hung and Bordas, St{\´e}phane Pierre Alain and Nguyen-Thanh, Nhon and Rabczuk, Timon},
  title     = {Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory},
  series = {Mechanics of Advanced Materials and Structures},
  journal   = {Mechanics of Advanced Materials and Structures},
  pages     = {451 -- 469},
  abstract  = {Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{YangBudarapuMahapatraetal.,
  author    = {Yang, Shih-Wei and Budarapu, Pattabhi Ramaiah and Mahapatra, D.R. and Bordas, St{\´e}phane Pierre Alain and Zi, Goangseup and Rabczuk, Timon},
  title     = {A Meshless Adaptive Multiscale Method for Fracture},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {382 -- 395},
  abstract  = {A Meshless Adaptive Multiscale Method for Fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Budarapu,
  author    = {Budarapu, Pattabhi Ramaiah},
  title     = {Adaptive multiscale methods for fracture},
  doi       = {10.25643/bauhaus-universitaet.2391},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150507-23918},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  abstract  = {One major research focus in the Material Science and Engineering Community in the past decade has been to obtain a more fundamental understanding on the phenomenon 'material failure'. Such an understanding is critical for engineers and scientists developing new materials with higher strength and toughness, developing robust designs against failure, or for those concerned with an accurate estimate of a component's design life. Defects like cracks and dislocations evolve at nano scales and influence the macroscopic properties such as strength, toughness and ductility of a material. In engineering applications, the global response of the system is often governed by the behaviour at the smaller length scales. Hence, the sub-scale behaviour must be computed accurately for good predictions of the full scale behaviour. Molecular Dynamics (MD) simulations promise to reveal the fundamental mechanics of material failure by modeling the atom to atom interactions. Since the atomistic dimensions are of the order of Angstroms ( A), approximately 85 billion atoms are required to model a 1 micro- m^3 volume of Copper. Therefore, pure atomistic models are prohibitively expensive with everyday engineering computations involving macroscopic cracks and shear bands, which are much larger than the atomistic length and time scales. To reduce the computational effort, multiscale methods are required, which are able to couple a continuum description of the structure with an atomistic description. In such paradigms, cracks and dislocations are explicitly modeled at the atomistic scale, whilst a self-consistent continuum model elsewhere. Many multiscale methods for fracture are developed for "fictitious" materials based on "simple" potentials such as the Lennard-Jones potential. Moreover, multiscale methods for evolving cracks are rare. Efficient methods to coarse grain the fine scale defects are missing. However, the existing multiscale methods for fracture do not adaptively adjust the fine scale domain as the crack propagates. Most methods, therefore only "enlarge" the fine scale domain and therefore drastically increase computational cost. Adaptive adjustment requires the fine scale domain to be refined and coarsened. One of the major difficulties in multiscale methods for fracture is to up-scale fracture related material information from the fine scale to the coarse scale, in particular for complex crack problems. Most of the existing approaches therefore were applied to examples with comparatively few macroscopic cracks. Key contributions The bridging scale method is enhanced using the phantom node method so that cracks can be modeled at the coarse scale. To ensure self-consistency in the bulk, a virtual atom cluster is devised providing the response of the intact material at the coarse scale. A molecular statics model is employed in the fine scale where crack propagation is modeled by naturally breaking the bonds. The fine scale and coarse scale models are coupled by enforcing the displacement boundary conditions on the ghost atoms. An energy criterion is used to detect the crack tip location. Adaptive refinement and coarsening schemes are developed and implemented during the crack propagation. The results were observed to be in excellent agreement with the pure atomistic simulations. The developed multiscale method is one of the first adaptive multiscale method for fracture. A robust and simple three dimensional coarse graining technique to convert a given atomistic region into an equivalent coarse region, in the context of multiscale fracture has been developed. The developed method is the first of its kind. The developed coarse graining technique can be applied to identify and upscale the defects like: cracks, dislocations and shear bands. The current method has been applied to estimate the equivalent coarse scale models of several complex fracture patterns arrived from the pure atomistic simulations. The upscaled fracture pattern agree well with the actual fracture pattern. The error in the potential energy of the pure atomistic and the coarse grained model was observed to be acceptable. A first novel meshless adaptive multiscale method for fracture has been developed. The phantom node method is replaced by a meshless differential reproducing kernel particle method. The differential reproducing kernel particle method is comparatively more expensive but allows for a more "natural" coupling between the two scales due to the meshless interpolation functions. The higher order continuity is also beneficial. The centro symmetry parameter is used to detect the crack tip location. The developed multiscale method is employed to study the complex crack propagation. Results based on the meshless adaptive multiscale method were observed to be in excellent agreement with the pure atomistic simulations. The developed multiscale methods are applied to study the fracture in practical materials like Graphene and Graphene on Silicon surface. The bond stretching and the bond reorientation were observed to be the net mechanisms of the crack growth in Graphene. The influence of time step on the crack propagation was studied using two different time steps. Pure atomistic simulations of fracture in Graphene on Silicon surface are presented. Details of the three dimensional multiscale method to study the fracture in Graphene on Silicon surface are discussed.},
  subject      = {Material},
  language  = {en}
}
@phdthesis{Le,
  author    = {Le, Ha Thanh},
  title     = {Behaviour of Rice Husk Ash in Self-Compacting High Performance Concrete},
  publisher = {Bauhaus-Universit{\"a}t Weimar, F.A. Finger- Institut f{\"u}r Baustoffkunde, Professur Werkstoffe des Bauens},
  address   = {Weimar},
  isbn      = {978-3-00-048928-0},
  doi       = {10.25643/bauhaus-universitaet.2373},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150310-23730},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {181},
  abstract  = {The main objective of this thesis is to investigate the characteristics of rice husk ash RHA) and then its behaviour in self-compacting high performance concrete (SCHPC) with respects to rheological properties, hydration and microstructure development and alkali silica reaction, in comparison with silica fume (SF). The main results show that the RHA is a macro-mesoporous amorphous siliceous material with a very high silica content comparable with SF. The pore size distribution is the most important parameter of RHA besides amorphous silica content. This parameter affects pore volume, specific surface area, and thus the water demand and the pozzolanic reactivity of RHA and its behaviour in SCHPC. The incorporation of RHA decreases filling and passing abilities, but significantly increases plastic viscosity and segregation resistance of SCHPC. Therefore, RHA can be used as a viscosity modifying admixture for SCHPC. The incorporation of RHA increases the superplasticizer adsorption, the superplasticizer saturation dosage, yield stress and plastic viscosity of mortar. Fresh mortar formulated from SCHPC is a shear-thickening material. The incorporation of RHA/SF ecreases the shearthickening degree. The incorporation of RHA/SF increases the degree of cement hydration. SF appears more effective at 3 days possibly due to the better nucleation site effect, whereas RHA dominates at the later ages possibly due to the internal water curing effect. The incorporation of RHA/SF increases the degree of C3S hydration, particularly the C3S hydration rate from 3 to 14 days. The pozzolanic reaction takes place outside and inside RHA particles. The internal pozzolanic eaction products consolidate the pores inside RHA particles rather than contribute to the pore refinement in the cement matrix. In the presence of the high alkali concentration, RHA particles act as microreactive aggregates and react with alkali hydroxide to generate the expansive alkali silica reaction products. Increasing the particle size and temperature increases the alkali silica reactivity of RHA. The mechanism for the successive pozzolanic and alkali silica reactions of RHA is theorized. Additionally, a new simple mix design method is proposed for SCHPC containing various supplementary cementitious materials, i.e. RHA, SF, fly ash and limestone powder.},
  subject      = {Werkstoffkunde},
  language  = {en}
}
@inproceedings{BargstaedtTarigan,
  author    = {Bargst{\"a}dt, Hans-Joachim and Tarigan, Rina Sari},
  title     = {RULE BASED EXPANSION OF STANDARD CONSTRUCTION PROCESSES},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2822},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28229},
  pages     = {6},
  abstract  = {The paper introduces a systematic construction management approach, supporting expansion of a specified construction process, both automatically and semi-automatically. Throughout the whole design process, many requirements must be taken into account in order to fulfil demands defined by clients. In implementing those demands into a design concept up to the execution plan, constraints such as site conditions, building code, and legal framework are to be considered. However, complete information, which is needed to make a sound decision, is not yet acquired in the early phase. Decisions are traditionally taken based on experience and assumptions. Due to a vast number of appropriate available solutions, particularly in building projects, it is necessary to make those decisions traceable. This is important in order to be able to reconstruct considerations and assumptions taken, should there be any changes in the future project's objectives. The research will be carried out by means of building information modelling, where rules deriving from standard logics of construction management knowledge will be applied. The knowledge comprises a comprehensive interaction amongst bidding process, cost-estimation, construction site preparation as well as specific project logistics - which are usually still separately considered. By means of these rules, favourable decision taking regarding prefabrication and in-situ implementation can be justified. Modifications depending on the available information within current design stage will consistently be traceable.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{NasirBargstaedt,
  author    = {Nasir, A.R. and Bargst{\"a}dt, Hans-Joachim},
  title     = {AMELIORATING EMPLOYABILITY IN CONSTRUCTION THROUGH BIM INNOVATION},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2815},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28157},
  pages     = {6},
  abstract  = {Low-skilled labor makes a significant part of the construction sector, performing daily production tasks that do not require specific technical knowledge or confirmed skills. Today, construction market demands increasing skill levels. Many jobs that were once considered to be undertaken by low or un-skilled labor, now demand some kind of formal skills. The jobs that require low skilled labor are continually decreasing due to technological advancement and globalization. Jobs that previously required little or no training now require skilful people to perform the tasks appropriately. The study aims at ameliorating employability of less skilled manpower by finding ways to instruct them for performing constructions tasks. A review of exiting task instruction methodologies in construction and the underlying gaps within them warrants an appropriate way to train and instruct low skilled workers for the tasks in construction. The idea is to ensure the required quality of construction with technological and didactic aids seeming particularly purposeful to prepare potential workers for the tasks in construction without exposing them to existing communication barriers. A BIM based technology is considered promising along with the integration of visual directives/animations to elaborate the construction tasks scheduled to be carried on site.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{KrausshardeAlmeida,
  author    = {Kraußhar, Rolf S{\"o}ren and de Almeida, Regina},
  title     = {FUNDAMENTALS OF A WIMAN VALIRON THEORY FOR POLYMONOGENIC FUNCTIONS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2810},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28100},
  pages     = {6},
  abstract  = {In this paper we present some rudiments of a generalized Wiman-Valiron theory in the context of polymonogenic functions. In particular, we analyze the relations between different notions of growth orders and the Taylor coefficients. Our main intention is to look for generalizations of the Lindel¨of-Pringsheim theorem. In contrast to the classical holomorphic and the monogenic setting we only obtain inequality relations in the polymonogenic setting. This is due to the fact that the Almansi-Fischer decomposition of a polymonogenic function consists of different monogenic component functions where each of them can have a totally different kind of asymptotic growth behavior.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{HommelGuerlebeck,
  author    = {Hommel, Angela and G{\"u}rlebeck, Klaus},
  title     = {THE RELATIONSHIP BETWEEN LINEAR ELASTICITY THEORY AND COMPLEX FUNCTION THEORY STUDIED ON THE BASIS OF FINITE DIFFERENCES},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2801},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28010},
  pages     = {6},
  abstract  = {It is well-known that the solution of the fundamental equations of linear elasticity for a homogeneous isotropic material in plane stress and strain state cases can be equivalently reduced to the solution of a biharmonic equation. The discrete version of the Theorem of Goursat is used to describe the solution of the discrete biharmonic equation by the help of two discrete holomorphic functions. In order to obtain a Taylor expansion of discrete holomorphic functions we introduce a basis of discrete polynomials which fulfill the so-called Appell property with respect to the discrete adjoint Cauchy-Riemann operator. All these steps are very important in the field of fracture mechanics, where stress and displacement fields in the neighborhood of singularities caused by cracks and notches have to be calculated with high accuracy. Using the sum representation of holomorphic functions it seems possible to reproduce the order of singularity and to determine important mechanical characteristics.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@phdthesis{Lovsin,
  author    = {Lovsin, Polonca},
  title     = {Between the Urban and the Rural : Back to the city},
  doi       = {10.25643/bauhaus-universitaet.2402},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150610-24020},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {236},
  abstract  = {Abstract This doctoral thesis defines the relationship between the urban and rural in the 21st century, and focuses on food as a key component. The fact that food is, for the most part, produced in the countryside and then transported to the city has a significant influence on this very unbalanced relationship today. The main goal was to show that it is necessary to bring agriculture, urban gardening, the breeding of domestic farm animals, and beekeeping back to the city, which would have a positive affect on both the city and the countryside. All of this is already taking place at the local level, within the neighbourhoods of our cities and through the work of self-organised activities and initiatives, which have been taken up by city residents themselves. One example of this is the community garden, a new model of gardening which offers fertile ground for growing vegetables and to test various forms of co-existence, different ways of designing spaces, the creation of alternative values, and a positive vision for the future of city residents. In 2010, I co-created the community urban garden Beyond a Construction Site, which is the central part of this artistic research. Throughout the entire four-year process of creating this community garden, theory and artistic practice were intertwined, and informed one another. This community garden is an example of a self-organised and self-managed community space located in a residential neighbourhood in the centre of the city of Ljubljana, and as such is a typical example of urbanism from the bottom up. I placed the creation and development of our community garden in a dialogue with the formal way of arranging urban gardening in Ljubljana, a top-down approach, which the city has been carrying out intensively since 2007. I compared the solutions being proposed by the city of Ljubljana for organising urban gardening with the way it is organised in other European cities, the UK, and the USA. I also researched the recent rapid growth of self-organised initiatives which are focused on the local production of food and seek to find more economic and ecologically friendly models to visibly influence the future of cities and the countryside. Here, community gardens play an important role, as in addition to the production of food they are also spaces for the criticism of existing urban policies, a self-organised revitalisation of neglected spaces, and places of resilience, because they differ from that which real estate agencies, large financial companies, and city authorities desire them to be. The community garden Beyond a Construction Site has become living proof that, through a group action, the residents of a neighbourhood can influence existing city policies and the future of both their own neighbourhood and that of the entire city. The initiators of this garden are artists and architects, and we began this community garden in the context of an art festival, which also shows that art can influence the processes of everyday life and help to create much needed spaces within cities to serve various purposes. Our community garden has also shown itself to be an important platform for the exchange of knowledge on organic gardening, ecology in everyday life, and critical architecture, as well as serving to connect related initiatives. Together with these other initiatives we are stronger, and are influencing structural changes within city politics, thereby also co-creating the future of Ljubljana. This community garden is helping us to redefine our relationship with the city and re-awaken the desires and actions of residents connected with realising their fundamental right, the right to the city. My other artworks, which I am presenting in the context of this doctoral thesis, show an optimistic vision for the future of cities. The video animations Back to the City (2011) and The Right Balance (2013), as well as the accompanying collages, visualise a city of the future where urban and rural practices live together side-by-side. This vision is being realised by city residents themselves, with their active participation in the creation of community gardens, growing their own vegetables, urban beekeeping, and by having egg-laying hens in their gardens. My desire was also to present the theoretical concept and scientific research to a non-academic public, and to people without specialised training. Using the method of storytelling I included knowledge from the research into the video animations and collages. In this way my artistic work, with an intentional playfulness, challenges today's faith in science and theoretical concepts, as well as directing attention to working with common sense, with one's own hands, and with the earth. This can contribute to a change in the still dominant anthropocentric view of nature, which is an urgently needed change for our future. Keywords: rural, urban agriculture, community gardens, urban beekeeping, the bottom-up approach to urban planning, alternative spaces},
  subject      = {Gemeinschaftsgarten},
  language  = {en}
}
@masterthesis{Krtschil,
  type      = {Bachelor Thesis},
  author    = {Krtschil, Anna},
  title     = {Vergleich verschiedener Indikatoren in Bezug auf die {\"O}kobilanz von Geb{\"a}uden},
  doi       = {10.25643/bauhaus-universitaet.2434},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150716-24340},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {73},
  abstract  = {Im Rahmen der Bachelorarbeit werden zwei Indikatoren zur Auswertung einer {\"O}kobilanz gegen{\"u}bergestellt. Die Umweltbelastungspunkte der Schweiz werden mit dem niederl{\"a}ndischen ReCiPe verglichen.},
  subject      = {Umweltbilanz},
  language  = {de}
}
@article{HamdiaLahmerNguyenThoietal.,
  author    = {Hamdia, Khader and Lahmer, Tom and Nguyen-Thoi, T. and Rabczuk, Timon},
  title     = {Predicting The Fracture Toughness of PNCs: A Stochastic Approach Based on ANN and ANFIS},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {304 -- 313},
  abstract  = {Predicting The Fracture Toughness of PNCs: A Stochastic Approach Based on ANN and ANFIS},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Nguyen,
  author    = {Nguyen, Manh Hung},
  title     = {µ-Hyperholomorphic Function Theory in R³: Geometric Mapping Properties and Applications},
  doi       = {10.25643/bauhaus-universitaet.2447},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150817-24477},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {155},
  abstract  = {This thesis applies the theory of \psi-hyperholomorphic functions dened in R^3 with values in the set of paravectors, which is identified with the Eucledian space R^3, to tackle some problems in theory and practice: geometric mapping properties, additive decompositions of harmonic functions and applications in the theory of linear elasticity.},
  subject      = {Mathematik},
  language  = {en}
}
@phdthesis{Aurin,
  author    = {Aurin, Ingo},
  title     = {Spurencodierung und Ber{\"u}hrungsmessung},
  doi       = {10.25643/bauhaus-universitaet.2397},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150526-23975},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {148},
  abstract  = {In der vorliegenden Ph.D.-Arbeit werden die Bereiche Materialit{\"a}t, Objektkultur und Physical Computing adressiert. Der Autor erkennt nun durch die durchlaufene intensive theoretische Betrachtungsweise des Themas Materialit{\"a}t die Bedeutung von Tastsinn und Objektoberfl{\"a}chen f{\"u}r den Alltag des praktizierenden Gestalters und proklamiert eine Wende und Hinwendung der Designpraxis zu den Potenzialen von Materialit{\"a}t und deren Bedeutung f{\"u}r die Akteure. Die Aufgabe der Praxisforschung ist es, eine inklusive Optimierungsmethode des Produktdesigns zu gestalten, mit der Designentwicklungen durch {\"u}berpr{\"u}fbare Nutzungsdaten optimiert werden k{\"o}nnen. Die taktile Pilotmethode ergab auf Basis der Generierung von Nutzerkarten Erkenntnisse {\"u}ber biometrische Werte, individuelle K{\"o}rpergr{\"o}ßen und unterschiedliche Handhabungsprinzipien.},
  subject      = {Materialit{\"a}t},
  language  = {de}
}
@inproceedings{MartinezSotoJentsch,
  author    = {Martinez Soto, Aner and Jentsch, Mark F.},
  title     = {Quantifizierung der langfristigen Entwicklung des Nutzungsgrades von Anlagen und Ger{\"a}ten im Wohnungssektor in Deutschland und Bestimmung zuk{\"u}nftiger Energieeinsparpotenziale im Hinblick auf die Klimaschutzziele der Bundesregierung},
  series = {Bauphysiktage Kaiserslautern 2015, Kaiserslautern, 21-22 Oktober 2015},
  booktitle = {Bauphysiktage Kaiserslautern 2015, Kaiserslautern, 21-22 Oktober 2015},
  editor    = {Kornadt, Oliver},
  edition   = {Zweitver{\"o}ffentlichung},
  publisher = {Eigenverlag der Technischen Universit{\"a}t Kaiserslautern},
  address   = {Kaiserslautern},
  doi       = {10.25643/bauhaus-universitaet.3106},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170516-31067},
  pages     = {137-141},
  abstract  = {Etwa ein Viertel des gesamten Endenergieverbrauchs (26\%) in Deutschland entf{\"a}llt auf den Wohnungssektor, wodurch dieser Sektor einen erheblichen Anteil am m{\"o}glichen Einsparpotenzial an Energie hat. Im Hinblick auf das Klimaschutzziel der Europ{\"a}ischen Union, die Energieeffizienz im Vergleich zu 1990 um 20\% zu erh{\"o}hen, stellt sich daher die Frage, welche Einsparpotenziale es im Wohnungssektor tats{\"a}chlich gibt und wie diese quantifiziert werden k{\"o}nnen. In dieser Arbeit wird der Einfluss der Parameter, die den Endenergieverbrauch beeinflussen, mit Hilfe einer Sensitivit{\"a}tsanalyse bestimmt. Die Ergebnisse der Sensitivit{\"a}tsanalyse zeigen, dass die einflussreichsten Parameter auf den Endenergieverbrauch der Innentemperaturbedarf, die L{\"a}nge der Heizperiode, die Außentemperatur (Gradtagzahl) und die Anzahl der Wohnungen sind. Dies sind Variablen, die nicht durch Verordnungen reguliert werden k{\"o}nnen. Der einzige Parameter, der regulierbar ist und einen bedeutenden Einfluss auf den Endenergieverbrauch hat, ist der Nutzungsgrad der Anlagen/Ger{\"a}te f{\"u}r Raumw{\"a}rme, Warmwasser und Kochen (sowie zu einem geringen Teil der Wirkungsgrad der eingesetzten Beleuchtung). Zur Quantifizierung des Energieeinsparpotentials im deutschen Wohnungssektor bez{\"u}glich des Nutzungsgrades wurden in dieser Arbeit Daten zur Bestimmung der langfristigen Entwicklung (Zeitraum 1990-2010) des Nutzungsgrades von Anlagen und Ger{\"a}ten analysiert. Mit verschiedenen Angaben aus der Literatur und mit Hilfe von S{\"a}ttigungskurven wurde die Entwicklung der Nutzugsgrade der Anlagen/Ger{\"a}te entsprechend der Energiequellen zwischen 1990 und 2010 ermittelt. Die erhaltenden S{\"a}ttigungskurven erm{\"o}glichen die Bestimmung der Entwicklung des Nutzenergieverbrauchs im deutschen Wohnungssektor. Hierbei wurde festgestellt, dass die Differenz zwischen Nutzenergieverbrauch und Endenergieverbrauch einen R{\"u}ckgang von 12 \% im betrachtenden Zeitraum verzeichnete und dass das Energieeinsparpotenzial in Abh{\"a}ngigkeit von der Energiequelle betr{\"a}chtlich variieren kann (um derzeit mehr als 35\%-Punkte). Im Hinblick auf das oben genannte Klimaschutzziel werden in dieser Arbeit verschiedene Entwicklungsszenarien auf Basis des Nutzungsgrades der Anlagen und der Energiequellen analysiert. Hierbei wird deutlich, dass das theoretische Energieeinsparpotenzial im deutschen Wohnungssektor bez{\"u}glich des durchschnittlichen Nutzungsgrades nur zwischen 4 und 15 \% liegt. Dies bedeutet, dass eine deutliche Reduktion des Endenergiebedarfs im Wohnungssektor nur stattfinden kann, wenn andere Energieeinsparmaßnahmen betrachtet werden. Basierend auf den Ergebnissen der Sensitivit{\"a}tsanalyse werden hierzu Empfehlungen gegeben.},
  subject      = {Wohnung},
  language  = {de}
}
@inproceedings{KavrakovTimmlerMorgenthal,
  author    = {Kavrakov, Igor and Timmler, Hans-Georg and Morgenthal, Guido},
  title     = {STRUCTURAL OPTIMIZATION USING THE ENERGY METHOD WITH INTEGRAL MATERIAL BEHAVIOUR},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2806},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28065},
  pages     = {6},
  abstract  = {With the advances of the computer technology, structural optimization has become a prominent field in structural engineering. In this study an unconventional approach of structural optimization is presented which utilize the Energy method with Integral Material behaviour (EIM), based on the Lagrange's principle of minimum potential energy. The equilibrium condition with the EIM, as an alternative method for nonlinear analysis, is secured through minimization of the potential energy as an optimization problem. Imposing this problem as an additional constraint on a higher cost function of a structural property, a bilevel programming problem is formulated. The nested strategy of solution of the bilevel problem is used, treating the energy and the upper objective function as separate optimization problems. Utilizing the convexity of the potential energy, gradient based algorithms are employed for its minimization and the upper cost function is minimized using the gradient free algorithms, due to its unknown properties. Two practical examples are considered in order to prove the efficiency of the method. The first one presents a sizing problem of I steel section within encased composite cross section, utilizing the material nonlinearity. The second one is a discrete shape optimization of a steel truss bridge, which is compared to a previous study based on the Finite Element Method.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Jentsch,
  author    = {Jentsch, Mark F.},
  title     = {Entwicklung eines Sommerreferenzjahres zur Bestimmung der sommerlichen {\"U}berhitzung von Geb{\"a}uden},
  series = {Bauphysiktage Kaiserslautern 2015, Kaiserslautern, 21-22 Oktober 2015},
  booktitle = {Bauphysiktage Kaiserslautern 2015, Kaiserslautern, 21-22 Oktober 2015},
  editor    = {Kornadt, Oliver},
  publisher = {Eigenverlag der Technischen Universit{\"a}t Kaiserslautern},
  address   = {Kaiserslautern},
  doi       = {10.25643/bauhaus-universitaet.3105},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170516-31058},
  pages     = {53-61},
  abstract  = {Die Ableitung von sommer-fokussierten warmen Referenzjahren aus langj{\"a}hrigen Klimadaten erfolgt in Europa bisher nach unterschiedlichen, l{\"a}nderspezifischen Methoden, die sich in der Regel allein auf die Trockentemperatur beziehen und in der Auswahl eines zusammenh{\"a}ngenden realen Sommerhalbjahres resultieren. Simulationsergebnisse zur sommerlichen {\"U}berhitzung von nat{\"u}rlich bel{\"u}fteten Geb{\"a}uden in Deutschland und Großbritannien zeigen jedoch f{\"u}r einige Wetterstationen weniger {\"U}berhitzung f{\"u}r Simulationen mit dem sommer-fokussierten Referenzjahr als f{\"u}r solche mit dem entsprechenden Testreferenzjahr (TRY) f{\"u}r den gleichen Ort. Dies gilt insbesondere dann, wenn einzelne Monate miteinander verglichen werden. Neben der Wahl eines kompletten Halbjahres, das sowohl extrem warme als auch vergleichsweise k{\"u}hle Monate beinhalten kann, liegt dies vor allem begr{\"u}ndet in der fehlenden Ber{\"u}cksichtigung der Solarstrahlung bei der Auswahl eines warmen Referenzjahres, die jedoch eine wichtige Rolle f{\"u}r sommerliche {\"U}berhitzungserscheinungen in Geb{\"a}uden spielt. Eine verl{\"a}ssliche, allgemein anerkannte Methode zur Erstellung von sommer-fokussierten Referenzjahren erscheint daher auch im Hinblick auf die rechtlichen Rahmenbedingungen in der Europ{\"a}ischen Union, die Strategien zur nat{\"u}rlichen Bel{\"u}ftung von Neubauten und Sanierungen beg{\"u}nstigen, erforderlich. Diese Arbeit pr{\"a}sentiert einen Ansatz zur Erstellung eines Sommerreferenzjahres (Summer Reference Year - SRY) aus dem TRY eines gegebenen Ortes und langj{\"a}hrigen Klimadaten. Die existierenden TRY-Daten werden hierbei skaliert, um den Bedingungen f{\"u}r Trockentemperatur und Solarstrahlung von nah-extremen Kandidatenjahren zu entsprechen, die separat {\"u}ber einen statistischen Ansatz ausgew{\"a}hlt werden. Anschließend werden Feuchttemperatur, Windgeschwindigkeit und Luftdruck des TRY durch lineare Korrelationen mit der Trockentemperatur angepasst, um die entsprechenden SRY-Daten zu erhalten. Der Vorteil dieser Methode liegt darin, dass das grundlegende Wettermuster des TRY erhalten bleibt und somit eine klare Relation zwischen SRY und TRY besteht, die eine Vergleichbarkeit von Simulationsergebnissen gew{\"a}hrleistet. {\"U}ber vergleichende Geb{\"a}udesimulationen mit dem zugrundeliegenden TRY und langj{\"a}hrigen Klimadatens{\"a}tzen kann nachgewiesen werden, dass sich das SRY zur Ermittlung sommerlicher {\"U}berhitzungserscheinungen in nat{\"u}rlich bel{\"u}fteten Geb{\"a}uden eignet. Weiterhin kann gezeigt werden, dass das SRY im Gegensatz zur direkten Nutzung eines Kandidatenjahres f{\"u}r einen nah-extremen Sommer die M{\"o}glichkeit eines monatsscharfen Vergleichs mit dem TRY erlaubt und frei von wenig repr{\"a}sentativen Besonderheiten ist, die in den entsprechenden Kandidatenjahren vorhanden sein k{\"o}nnen.},
  subject      = {Bauphysik},
  language  = {de}
}
@phdthesis{Sucker,
  author    = {Sucker, Katharina},
  title     = {Communities in discourse and space. Towards a spatial dialectic in gated residential developments},
  doi       = {10.25643/bauhaus-universitaet.2346},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150206-23466},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {243},
  abstract  = {This research projects deals with the discoursivity of spatial production. By looking at contemporary residential development in the city of Istanbul, I will examine the reciprocity of the material production of space on one hand, and social discourses on the other, in order to make a contribution to how physical space can be used as a source of research in urban studies. In real estate marketing social discourses are used as a source of reference for place branding or identity design. Branding concepts therefore relate to how social groups imagine their position or future position in society, imaginaries that are continuously influenced and changed by social dynamics within the city but also from the outside. How such urban identities are formed and it what way they relate to the urban environment is crucial to a wide spectrum of social and cultural science. The constitutive role urban space attains has been described and analysed in much detail. Such scrutiny however has yet to be applied to the visual and communicative forms of engagement, the build environment partakes in the formation and change of social discourses.},
  subject      = {Architektur},
  language  = {en}
}
@article{NguyenThanhValizadehNguyenetal.,
  author    = {Nguyen-Thanh, Nhon and Valizadeh, Navid and Nguyen, Manh Hung and Nguyen-Xuan, Hung and Zhuang, Xiaoying and Areias, Pedro and Zi, Goangseup and Bazilevs, Yuri and De Lorenzis, Laura and Rabczuk, Timon},
  title     = {An extended isogeometric thin shell analysis based on Kirchhoff-Love theory},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {265 -- 291},
  abstract  = {An extended isogeometric thin shell analysis based on Kirchho_-Love theory},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@techreport{SchwanckRuiz,
  author    = {Schwanck, Anke and Ruiz, Marcelo},
  title     = {Allokation und Steuerung von Fl{\"a}chenressourcen in Hochschulen (FLHO)},
  organization    = {Bauhaus-Universit{\"a}t Weimar, Fakult{\"a}t Bauingenieurwesen, Professur Betriebswirtschaftslehre im Bauwesen},
  isbn      = {978-3-95773-188-3},
  doi       = {10.25643/bauhaus-universitaet.2357},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150227-23570},
  pages     = {491},
  abstract  = {Generell hat sich im Forschungsprojekt insbesondere durch die Gespr{\"a}che mit den Hochschulvertretern best{\"a}tigt, dass f{\"u}r qualitativ hochwertige Lehre und Forschung qualitativ hochwertige Fl{\"a}chen in ausreichendem Umfang notwendig sind. Ein Ziel der Forschungsarbeit ist die Entwicklung von Modellen zur Allokation und Steuerung von Fl{\"a}chenressourcen in Hochschulen. Ausgehend von Darstellungen und Erfahrungen f{\"u}r die Fl{\"a}chensteuerung aus Unternehmen, anderen Bereichen der {\"o}ffentlichen Verwaltung und Forschungseinrichtungen wurden m{\"o}gliche Steuerungsverfahren f{\"u}r Hochschulen untersucht. Es wurde ein Steuerungsmodell f{\"u}r Hochschulen entwickelt, das auf die hochschulinternen und die extern wirksamen Rahmenbedingungen reagiert. Die hochschulinterne Fl{\"a}chenallokation wird zum einen maßgeblich von externen Rahmen-bedingungen und zum zweiten von internen Prozessen, Abl{\"a}ufen und Strukturen beeinflusst. Die Kenntnis dieser Bedingungen wird als Voraussetzung f{\"u}r die Benennung von Erfolgsfak-toren f{\"u}r die Implementation neuer Steuerungsmodelle angenommen. Analysiert wurden daher die liegenschaftspolitischen und die organisatorischen Rahmenbedingungen sowie die steuerungsrelevanten Eigenschaften der Fl{\"a}chen selber.},
  subject      = {Fl{\"a}che},
  language  = {de}
}
@phdthesis{Kloke,
  author    = {Kloke, Christina Anna},
  title     = {Das Manifest als Medium der Rezeptionssteuerung im Architektur- und Designdiskurs},
  doi       = {10.25643/bauhaus-universitaet.2428},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150702-24284},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {225},
  abstract  = {In der vorliegenden Arbeit werden Manifest{\"a}ußerungen des Design- und Architekturdiskurses im situativen, medialen, institutionellen und historischen Kontext untersucht. Auf Grundlage einer Analyse der Etymologie und der Ideengeschichte des Manifestes wird anhand ausgew{\"a}hlter Beispiele die These belegt, dass das Medium vor allem der gezielten Rezeptionssteuerung im Diskurs dient. Dar{\"u}ber hinaus wird die F{\"a}higkeit und Bedeutung des Manifestes als Spiegel vergangener und gegenw{\"a}rtiger, aber auch als Wegbereiter zuk{\"u}nftiger Diskurse analysiert und Entwicklungen des Manifestes hinsichtlich Stilistik, Inhalt, Funktion und Bedeutung im Design- und Architekturdiskurs dargestellt.},
  subject      = {Manifest},
  language  = {de}
}
@phdthesis{Kloke,
  author    = {Kloke, Christina Anna},
  title     = {Das Manifest als Medium der Rezeptionssteuerung im Architektur- und Designdiskurs},
  doi       = {10.25643/bauhaus-universitaet.2415},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150623-24151},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {225},
  abstract  = {In der vorliegenden Arbeit werden Manifest{\"a}ußerungen des Design- und Architekturdiskurses im situativen, medialen, institutionellen und historischen Kontext untersucht. Auf Grundlage einer Analyse der Etymologie und der Ideengeschichte des Manifestes wird anhand ausgew{\"a}hlter Beispiele die These belegt, dass das Medium vor allem der gezielten Rezeptionssteuerung im Diskurs dient. Dar{\"u}ber hinaus wird die F{\"a}higkeit und Bedeutung des Manifestes als Spiegel vergangener und gegenw{\"a}rtiger, aber auch als Wegbereiter zuk{\"u}nftiger Diskurse analysiert und Entwicklungen des Manifestes hinsichtlich Stilistik, Inhalt, Funktion und Bedeutung im Design- und Architekturdiskurs dargestellt.},
  subject      = {Manifest},
  language  = {de}
}
@phdthesis{Forler,
  author    = {Forler, Christian},
  title     = {Analysis Design \& Applications of Cryptographic Building Blocks},
  publisher = {Shaker Verlag},
  doi       = {10.25643/bauhaus-universitaet.2376},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150330-23764},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {213},
  abstract  = {This thesis deals with the basic design and rigorous analysis of cryptographic schemes and primitives, especially of authenticated encryption schemes, hash functions, and password-hashing schemes. In the last decade, security issues such as the PS3 jailbreak demonstrate that common security notions are rather restrictive, and it seems that they do not model the real world adequately. As a result, in the first part of this work, we introduce a less restrictive security model that is closer to reality. In this model it turned out that existing (on-line) authenticated encryption schemes cannot longer beconsidered secure, i.e. they can guarantee neither data privacy nor data integrity. Therefore, we present two novel authenticated encryption scheme, namely COFFE and McOE, which are not only secure in the standard model but also reasonably secure in our generalized security model, i.e. both preserve full data inegrity. In addition, McOE preserves a resonable level of data privacy. The second part of this thesis starts with proposing the hash function Twister-Pi, a revised version of the accepted SHA-3 candidate Twister. We not only fixed all known security issues of Twister, but also increased the overall soundness of our hash-function design. Furthermore, we present some fundamental groundwork in the area of password-hashing schemes. This research was mainly inspired by the medial omnipresence of password-leakage incidences. We show that the password-hashing scheme scrypt is vulnerable against cache-timing attacks due to the existence of a password-dependent memory-access pattern. Finally, we introduce Catena the first password-hashing scheme that is both memory-consuming and resistant against cache-timing attacks.},
  subject      = {Kryptologie},
  language  = {en}
}