@inproceedings{IgnatovaKirschkeTauscheretal., author = {Ignatova, Elena and Kirschke, Heiko and Tauscher, Eike and Smarsly, Kay}, title = {PARAMETRIC GEOMETRIC MODELING IN CONSTRUCTION PLANNING USING INDUSTRY FOUNDATION CLASSES}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2802}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28024}, pages = {8}, abstract = {One of the most promising and recent advances in computer-based planning is the transition from classical geometric modeling to building information modeling (BIM). Building information models support the representation, storage, and exchange of various information relevant to construction planning. This information can be used for describing, e.g., geometric/physical properties or costs of a building, for creating construction schedules, or for representing other characteristics of construction projects. Based on this information, plans and specifications as well as reports and presentations of a planned building can be created automatically. A fundamental principle of BIM is object parameterization, which allows specifying geometrical, numerical, algebraic and associative dependencies between objects contained in a building information model. In this paper, existing challenges of parametric modeling using the Industry Foundation Classes (IFC) as a federated model for integrated planning are shown, and open research questions are discussed.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{SmarslyTauscher, author = {Smarsly, Kay and Tauscher, Eike}, title = {IFC-BASED MONITORING INFORMATION MODELING FOR DATA MANAGEMENT IN STRUCTURAL HEALTH MONITORING}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2823}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28237}, pages = {7}, abstract = {This conceptual paper discusses opportunities and challenges towards the digital representation of structural health monitoring systems using the Industry Foundation Classes (IFC) standard. State-of-the-art sensor nodes, collecting structural and environmental data from civil infrastructure systems, are capable of processing and analyzing the data sets directly on-board the nodes. Structural health monitoring (SHM) based on sensor nodes that possess so called "on-chip intelligence" is, in this study, referred to as "intelligent SHM", and the infrastructure system being equipped with an intelligent SHM system is referred to as "intelligent infrastructure". Although intelligent SHM will continue to grow, it is not possible, on a well-defined formalism, to digitally represent information about sensors, about the overall SHM system, and about the monitoring strategies being implemented ("monitoring-related information"). Based on a review of available SHM regulations and guidelines as well as existing sensor models and sensor modeling languages, this conceptual paper investigates how to digitally represent monitoring-related information in a semantic model. With the Industry Foundation Classes, there exists an open standard for the digital representation of building information; however, it is not possible to represent monitoring-related information using the IFC object model. This paper proposes a conceptual approach for extending the current IFC object model in order to include monitoring-related information. Taking civil infrastructure systems as an illustrative example, it becomes possible to adequately represent, process, and exchange monitoring-related information throughout the whole life cycle of civil infrastructure systems, which is referred to as monitoring information modeling (MIM). However, since this paper is conceptual, additional research efforts are required to further investigate, implement, and validate the proposed concepts and methods.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{HoelterMahmoudiSchanz, author = {H{\"o}lter, Raoul and Mahmoudi, Elham and Schanz, Tom}, title = {OPTIMAL SENSOR LOCATION FOR PARAMETER IDENTIFICATION IN SOFT CLAY}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2800}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28008}, pages = {6}, abstract = {Performing parameter identification prior to numerical simulation is an essential task in geotechnical engineering. However, it has to be kept in mind that the accuracy of the obtained parameter is closely related to the chosen experimental setup, such as the number of sensors as well as their location. A well considered position of sensors can increase the quality of the measurement and to reduce the number of monitoring points. This Paper illustrates this concept by means of a loading device that is used to identify the stiffness and permeability of soft clays. With an initial setup of the measurement devices the pore water pressure and the vertical displacements are recorded and used to identify the afore mentioned parameters. Starting from these identified parameters, the optimal measurement setup is investigated with a method based on global sensitivity analysis. This method shows an optimal sensor location assuming three sensors for each measured quantity, and the results are discussed.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Grigor'ev, author = {Grigor'ev, Yuri}, title = {REGULAR QUATERNIONIC FUNCTIONS AND THEIR APPLICATIONS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2798}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27988}, pages = {6}, abstract = {The theory of regular quaternionic functions of a reduced quaternionic variable is a 3-dimensional generalization of complex analysis. The Moisil-Theodorescu system (MTS) is a regularity condition for such functions depending on the radius vector r = ix+jy+kz seen as a reduced quaternionic variable. The analogues of the main theorems of complex analysis for the MTS in quaternion forms are established: Cauchy, Cauchy integral formula, Taylor and Laurent series, approximation theorems and Cauchy type integral properties. The analogues of positive powers (inner spherical monogenics) are investigated: the set of recurrence formulas between the inner spherical monogenics and the explicit formulas are established. Some applications of the regular function in the elasticity theory and hydrodynamics are given.}, subject = {Angewandte Informatik}, language = {en} } @article{KonichNikitinKlimenkoetal., author = {Konich, Kira and Nikitin, Igor and Klimenko, Stanislav and Malofeev, Valery and Tyul'bashev, Sergey}, title = {Radio Astronomical Monitoring in Virtual Environment}, series = {Procedia Computer Science}, journal = {Procedia Computer Science}, doi = {10.1016/j.procs.2015.11.067}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31431}, pages = {592 -- 601}, abstract = {We present StarWatch, our application for real-time analysis of radio astronomical data in Virtual Environment. Serving as an interface to radio astronomical databases or being applied to live data from the radio telescopes, the application supports various data filters measuring signal-to-noise ratio (SNR), Doppler's drift, degree of signal localization on celestial sphere and other useful tools for signal extraction and classification. Originally designed for the database of narrow band signals from SETI Institute (setilive.org), the application has been recently extended for the detection of wide band periodic signals, necessary for the search of pulsars. We will also address the detection of week signals possessing arbitrary waveforms and present several data filters suitable for this purpose.}, subject = {Virtuelle Realit{\"a}t}, language = {en} } @inproceedings{VolkovKirschkeChelyshkovetal., author = {Volkov, Andrey and Kirschke, Heiko and Chelyshkov, Pavel and Sedov, Artem and Lysenko, Denis}, title = {THE CRITERIA'S SET WITH INVARIANT DESIGN BUILDING ELEMENTS ON THE BASE OF THREE IMPUTATIONS: "CONVENIENCE", "SAFETY" AND "ENERGY-EFFICIENCY"}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2795}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27956}, pages = {6}, abstract = {The paper deals with the formalization of the criteria for constructing building management systems. We consider three criteria - "convenience", "safety" and "energyefficiency". For each objective proposed method of calculation.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{MacedoBentaPicadoSantos, author = {Macedo, Joaquim Miguel and Benta, Agostinho and Picado-Santos, Luis}, title = {USE OF MICROSIMULATION IN THE ADAPTATION TO PORTUGAL OF THE HCM 2000 METHODOLOGY FOR BASIC FREEWAY SEGMENTS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2812}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28122}, pages = {7}, abstract = {Portugal is one of the European countries with higher spatial and population freeway network coverage. The sharp growth of this network in the last years instigates the use of methods of analysis and the evaluation of their quality of service in terms of the traffic performance, typically performed through internationally accepted methodologies, namely that presented in the Highway Capacity Manual (HCM). Lately, the use of microscopic traffic simulation models has been increasingly widespread. These models simulate the individual movement of the vehicles, allowing to perform traffic analysis. The main target of this study was to verify the possibility of using microsimulation as an auxiliary tool in the adaptation of the methodology by HCM 2000 to Portugal. For this purpose, were used the microscopic simulators AIMSUN and VISSIM for the simulation of the traffic circulation in the A5 Portuguese freeway. The results allowed the analysis of the influence of the main geometric and traffic factors involved in the methodology by HCM 2000. In conclusion, the study presents the main advantages and limitations of the microsimulators AIMSUN and VISSIM in modelling the traffic circulation in Portuguese freeways. The main limitation is that these microsimulators are not able to simulate explicitly some of the factors considered in the HCM 2000 methodology, which invalidates their direct use as a tool in the quantification of those effects and, consequently, makes the direct adaptation of this methodology to Portugal impracticable.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{OPUS4-2374, title = {Urban Design for Mussolini, Stalin, Salazar, Hitler and Franco During the Interwar Period}, editor = {Bauhaus-Institut f{\"u}r Geschichte und Theorie der Architektur und Planung,}, doi = {10.25643/bauhaus-universitaet.2374}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150323-23746}, abstract = {Urban design played a central role for the European dictatorships during the 20th century, it served to legitimate the regime, to produce agreement, to demonstrate power, efficiency and speed, it communicated the social, as well as design projects, of the dictatorial regimes domestically and internationally, it tied old experts, as well as new, to the regime. Dictatorial urban design also played an important role after the fall of the dictatorships: It became the object of structural and verbal handling strategies: of demolition, of transformation, of reconstruction, of forgetting, of suppressing, of re-interpretation and of glorification. The topic area is, therefore, both historical and relevant to the present day. The discussion of the topic area is, like it or not, always embedded in the present state of societal engagement with dictatorships. In order to even be able to discuss all of these aspects, different conceptual decisions are necessary. In retrospect, these may seem to many as self-evident, although they are anything but. Our thesis is that there are three methodological imperatives, especially, which allow an expanded approach to the topic area "urban design and dictatorship". First and above all, the tunnel view, focused on individual dictatorships and neglecting the international dimension, must be overcome. Second, the differences in urban design over the course of a dictatorship, through an appropriate periodisation, should be emphasised. Third, we must strive for an open, flexible, but complex concept of urban design. The main focus lies on the urban design of the most influential dictatorships of the first half of the 20th century: Soviet Union, Fascist Italy and Nazi Germany, including the urban design of the autarky periods in Portugal and Spain. After all, urban design is not just a product of specific historic circumstances. It is a form that continues to have long-term effects, which demonstrates its usefulness and adaptability throughout this process. The urban design products undoubtedly still recall the dictatorial rule under which they were created. However, they are more than a memory space. They are also a living space of the present. They can and should be discussed with respect to their spatial and functional utility for today and tomorrow. Such a perspective is a given for the citizens of a city, but also for city marketing, having marvellous consequences. Only when we do not exclude this dimension a priori, even in academic discussions, can we do justice to the products of dictatorships. And finally, the view of the urban design of dictatorships can and must contribute to the questioning of simplified and naive conceptions of dictatorships. With urban design in mind, we can observe how dictatorships work and how they were able to prevail. In Europe, these questions are of the highest actuality.}, subject = {Urbanit{\"a}t}, language = {en} } @inproceedings{JahrSchlichDragosetal., author = {Jahr, Katrin and Schlich, Robert and Dragos, Kosmas and Smarsly, Kay}, title = {DECENTRALIZED AUTONOMOUS FAULT DETECTION IN WIRELESS STRUCTURAL HEALTH MONITORING SYSTEMS USING STRUCTURAL RESPONSE DATA}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2803}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28031}, pages = {8}, abstract = {Sensor faults can affect the dependability and the accuracy of structural health monitoring (SHM) systems. Recent studies demonstrate that artificial neural networks can be used to detect sensor faults. In this paper, decentralized artificial neural networks (ANNs) are applied for autonomous sensor fault detection. On each sensor node of a wireless SHM system, an ANN is implemented to measure and to process structural response data. Structural response data is predicted by each sensor node based on correlations between adjacent sensor nodes and on redundancies inherent in the SHM system. Evaluating the deviations (or residuals) between measured and predicted data, sensor faults are autonomously detected by the wireless sensor nodes in a fully decentralized manner. A prototype SHM system implemented in this study, which is capable of decentralized autonomous sensor fault detection, is validated in laboratory experiments through simulated sensor faults. Several topologies and modes of operation of the embedded ANNs are investigated with respect to the dependability and the accuracy of the fault detection approach. In conclusion, the prototype SHM system is able to accurately detect sensor faults, demonstrating that neural networks, processing decentralized structural response data, facilitate autonomous fault detection, thus increasing the dependability and the accuracy of structural health monitoring systems.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{MeierSchanz, author = {Meier, J{\"o}rg and Schanz, Tom}, title = {Benchmarking of Optimization Algorithms}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2813}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28134}, pages = {6}, abstract = {In this paper, we present an empirical approach for objective and quantitative benchmarking of optimization algorithms with respect to characteristics induced by the forward calculation. Due to the professional background of the authors, this benchmarking strategy is illustrated on a selection of search methods in regard to expected characteristics of geotechnical parameter back calculation problems. Starting from brief introduction into the approach employed, a strategy for optimization algorithm benchmarking is introduced. The benchmarking utilizes statistical tests carried out on well-known test functions superposed with perturbations, both chosen to mimic objective function topologies found for geotechnical objective function topologies. Here, the moved axis parallel hyper-ellipsoid test function and the generalized Ackley test function in conjunction with an adjustable quantity of objective function topology roughness and fraction of failing forward calculations is analyzed. In total, results for 5 optimization algorithms are presented, compared and discussed.}, subject = {Angewandte Informatik}, language = {en} } @article{WangArash, author = {Wang, Quan and Arash, Behrouz}, title = {Announcement of a virtual special issue on computational carbon nanoscience}, series = {Carbon}, journal = {Carbon}, doi = {10.1016/j.carbon.2015.05.082}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170428-31695}, pages = {370 -- 372}, abstract = {The Carbon journal is pleased to introduce a themed collection of recent articles in the area of computational carbon nanoscience. This virtual special issue was assembled from previously published Carbon articles by Guest Editors Quan Wang and Behrouz Arash, and can be accessed as a set in the special issue section of the journal website homepage: www.journals.elsevier.com/carbon. The article below by our guest editors serves as an introduction to this virtual special issue, and also a commentary on the growing role of computation as a tool to understand the synthesis and properties of carbon nanoforms and their behavior in composite materials.}, subject = {Kohlenstoff}, language = {en} } @inproceedings{KhristichAstapov, author = {Khristich, Dmitrii and Astapov, Yuri}, title = {VARIATIONAL POSITING AND SOLUTION OF COUPLED THERMOMECHANICAL PROBLEMS IN A REFERENCE CONFIGURATION}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2809}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28091}, pages = {6}, abstract = {Variational formulation of a coupled thermomechanical problem of anisotropic solids for the case of non-isothermal finite deformations in a reference configuration is shown. The formulation of the problem includes: a condition of equilibrium flow of a deformation process in the reference configuration; an equation of a coupled heat conductivity in a variational form, in which an influence of deformation characteristics of a process on the temperature field is taken into account; tensor-linear constitutive relations for a hypoelastic material; kinematic and evolutional relations; initial and boundary conditions. Based on this formulation several axisymmetric isothermal and coupled problems of finite deformations of isotropic and anisotropic bodies are solved. The solution of coupled thermomechanical problems for a hollow cylinder in case of finite deformation showed an essential influence of coupling on distribution of temperature, stresses and strains. The obtained solutions show the development of stressstrain state and temperature changing in axisymmetric bodies in the case of finite deformations.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{GoebelOsburgLahmer, author = {G{\"o}bel, Luise and Osburg, Andrea and Lahmer, Tom}, title = {STUDY OF ANALYTICAL MODELS OF THE MECHANICAL BEHAVIOR OF POLYMER-MODIFIED CONCRETE}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2797}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27973}, pages = {9}, abstract = {Polymer modification of mortar and concrete is a widely used technique in order to improve their durability properties. Hitherto, the main application fields of such materials are repair and restoration of buildings. However, due to the constant increment of service life requirements and the cost efficiency, polymer modified concrete (PCC) is also used for construction purposes. Therefore, there is a demand for studying the mechanical properties of PCC and entitative differences compared to conventional concrete (CC). It is significant to investigate whether all the assumed hypotheses and existing analytical formulations about CC are also valid for PCC. In the present study, analytical models available in the literature are evaluated. These models are used for estimating mechanical properties of concrete. The investigated property in this study is the modulus of elasticity, which is estimated with respect to the value of compressive strength. One existing database was extended and adapted for polymer-modified concrete mixtures along with their experimentally measured mechanical properties. Based on the indexed data a comparison between model predictions and experiments was conducted by calculation of forecast errors.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Vieira, author = {Vieira, Nelson}, title = {SOME RESULTS IN FRACTIONAL CLIFFORD ANALYSIS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2825}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28256}, pages = {6}, abstract = {What is nowadays called (classic) Clifford analysis consists in the establishment of a function theory for functions belonging to the kernel of the Dirac operator. While such functions can very well describe problems of a particle with internal SU(2)-symmetries, higher order symmetries are beyond this theory. Although many modifications (such as Yang-Mills theory) were suggested over the years they could not address the principal problem, the need of a n-fold factorization of the d'Alembert operator. In this paper we present the basic tools of a fractional function theory in higher dimensions, for the transport operator (alpha = 1/2 ), by means of a fractional correspondence to the Weyl relations via fractional Riemann-Liouville derivatives. A Fischer decomposition, fractional Euler and Gamma operators, monogenic projection, and basic fractional homogeneous powers are constructed.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{FerreiraVieira, author = {Ferreira, Milton dos Santos and Vieira, Nelson}, title = {EIGENFUNCTIONS AND FUNDAMENTAL SOLUTIONS FOR THE FRACTIONAL LAPLACIAN IN 3 DIMENSIONS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2796}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27968}, pages = {6}, abstract = {Recently there has been a surge of interest in PDEs involving fractional derivatives in different fields of engineering. In this extended abstract we present some of the results developedin [3]. We compute the fundamental solution for the three-parameter fractional Laplace operator Δ by transforming the eigenfunction equation into an integral equation and applying the method of separation of variables. The obtained solutions are expressed in terms of Mittag-Leffer functions. For more details we refer the interested reader to [3] where it is also presented an operational approach based on the two Laplace transform.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Musial, author = {Musial, Michal}, title = {THE INFLUENCE OF CRACKS AND OVERESTIMATION ERRORS ON THE DEFLECTION OF THE REINFORCED CONCRETE BEAMS IN THE RIGID FINITE ELEMENT METHOD}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2814}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28142}, pages = {6}, abstract = {This article presents the Rigid Finite Element Method in the calculation of reinforced concrete beam deflection with cracks. Initially, this method was used in the shipbuilding industry. Later, it was adapted in the homogeneous calculations of the bar structures. In this method, rigid mass discs serve as an element model. In the flat layout, three generalized coordinates (two translational and one rotational) correspond to each disc. These discs are connected by elastic ties. The genuine idea is to take into account a discrete crack in the Rigid Finite Element Method. It consists in the suitable reduction of the rigidity in rotational ties located in the spots, where cracks occurred. The susceptibility of this tie results from the flexural deformability of the element and the occurrence of the crack. As part of the numerical analyses, the influence of cracks on the total deflection of beams was determined. Furthermore, the results of the calculations were compared to the results of the experiment. Overestimations of the calculated deflections against the measured deflections were found. The article specifies the size of the overestimation and describes its causes.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{StokmaierClassSchulenbergetal., author = {Stokmaier, Markus and Class, A.G. and Schulenberg, T. and Lahey Jr., R.T}, title = {OPTIMISING ACOUSTIC RESONATORS FOR SONOFUSION EXPERIMENTS WITH EVOLUTIONARY ALGORITHMS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2820}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28202}, pages = {8}, abstract = {The sizing of simple resonators like guitar strings or laser mirrors is directly connected to the wavelength and represents no complex optimisation problem. This is not the case with liquid-filled acoustic resonators of non-trivial geometries, where several masses and stiffnesses of the structure and the fluid have to fit together. This creates a scenario of many competing and interacting resonances varying in relative strength and frequency when design parameters change. Hence, the resonator design involves a parameter-tuning problem with many local optima. As its solution evolutionary algorithms (EA) coupled to a forced-harmonic FE simulation are presented. A new hybrid EA is proposed and compared to two state-of-theart EAs based on selected test problems. The motivating background is the search for better resonators suitable for sonofusion experiments where extreme states of matter are sought in collapsing cavitation bubbles.}, subject = {Angewandte Informatik}, language = {en} } @phdthesis{Chen, author = {Chen, Pu}, title = {Die Reise der Zeichen - Eine Studie zur symbolischen Bildwelt der Xiy{\"u}-Kultur an der Seidenstraße}, doi = {10.25643/bauhaus-universitaet.2355}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150225-23553}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {281}, abstract = {The present study focuses on the traditional visual Xiyu-Signs of various ethnic groups with the example of Xinjiang in northwest China, along the ancient path of the Silk Road. The research should be understood as an experiment to a systematic presentation of the symbolic visual world in Xinjiang and therefore in a broader sense as an experiment to preserve the endangered Xiyu-Cultural Heritage. Due to the profound change in China and the Go-West-Strategy of China's economic programme an efficient way must be found to bring modernization and tradition in harmony. This study describes, analyses and evaluates exemplarily, how signs and symbols of knowledge and culture have been mixed between eastern and western cultures along the Silk Road in Xinjiang. It displays how they have been transferred and how far the Xiyu-Culture reflects, that Xinjiang was a meeting point of eastern and western cultures. In the process of my research three main questions arose: Firstly, what can the experience model of the ancient Silk Road contribute to the understanding of cultural development in today's information age? Secondly, what does cultural diversity mean for communication in Xinjiang? Is there an increase of media technology in the field of visual communication because of international influences? Thirdly, how can Xinjiang benefit from the opportunities given by the Go-West-Strategy of China's economic programme in an increasingly globalized world and find a balance between culture and economic prosperity? Therefore, this study uses a method that integrates a cultural-anthropological perspective. Characteristics of the traditional visual Xiyu-Signs, their significance for the ethnic groups in Xinjiang and cultural exchanges between Europe and Asia are discussed based on a field work, and the particular influence of trade and transport routes is presented. The visual signs of the Xiyu-Culture are shown from the time before the Islamization to today's Islamic period. The research shows that the signs are not place-bound cultural phenomena or local tradition; they are rather influenced by regional, national and international cultures consciously or unconsciously. They are a result of cultural communication. Finally the signs of Xiyu-Culture of Xinjiang are thoroughly researched with the Go-West-Strategy of the Chinese government. Economic development brings to Xinjiang not only modernization and prosperity, but also a cultural and ecological imbalance. Mankind formed everything into structure, what he perceives around him, with signs. The Xiyu-Signs create a visual structure. The Xiyu-Culture still has influence on the lifestyle of the ethnic groups in Xinjiang. Today, the confrontation between the traditional Xiyu-Culture and economic development has led to a serious conflict in Xinjiang. This study is a critical interpretation of the current situation of Xiyu-Culture and the Chinese economic program in Xinjiang. It also contributes to the analysis of the hitherto insufficiently recognized interactions between history, culture, politics and economics of cultural globalization in Xinjiang.}, subject = {Seidenstraße}, language = {de} } @inproceedings{AlYasiriGuerlebeck, author = {Al-Yasiri, Zainab and G{\"u}rlebeck, Klaus}, title = {ON BOUNDARY VALUE PROBLEMS FOR P-LAPLACE AND P-DIRAC EQUATIONS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2792}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27928}, pages = {8}, abstract = {The p-Laplace equation is a nonlinear generalization of the Laplace equation. This generalization is often used as a model problem for special types of nonlinearities. The p-Laplace equation can be seen as a bridge between very general nonlinear equations and the linear Laplace equation. The aim of this paper is to solve the p-Laplace equation for 2 < p < 3 and to find strong solutions. The idea is to apply a hypercomplex integral operator and spatial function theoretic methods to transform the p-Laplace equation into the p-Dirac equation. This equation will be solved iteratively by using a fixed point theorem.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{AlmamouGebhardtBocketal., author = {Almamou, Abd Albasset and Gebhardt, Thomas and Bock, Sebastian and Hildebrand, J{\"o}rg and Schwarz, Willfried}, title = {QUALITY CONTROL OF CONSTRUCTED MODELS USING 3D POINT CLOUD}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2794}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27944}, pages = {9}, abstract = {Over the last decade, the technology of constructing buildings has been dramatically developed especially with the huge growth of CAD tools that help in modeling buildings, bridges, roads and other construction objects. Often quality control and size accuracy in the factory or on construction site are based on manual measurements of discrete points. These measured points of the realized object or a part of it will be compared with the points of the corresponding CAD model to see whether and where the construction element fits into the respective CAD model. This process is very complicated and difficult even when using modern measuring technology. This is due to the complicated shape of the components, the large amount of manually detected measured data and the high cost of manual processing of measured values. However, by using a modern 3D scanner one gets information of the whole constructed object and one can make a complete comparison against the CAD model. It gives an idea about quality of objects on the whole. In this paper, we present a case study of controlling the quality of measurement during the constructing phase of a steel bridge by using 3D point cloud technology. Preliminary results show that an early detection of mismatching between real element and CAD model could save a lot of time, efforts and obviously expenses.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Vasileva, author = {Vasileva, Iuliia}, title = {THE PROBLEM OF PARTIAL REINFORCING AN INTERFACE CRACK EDGE BY A RIGID PATCH PLATE UNDER IN-PLANE AND ANTIPLANE LOADS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2824}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28242}, pages = {5}, abstract = {The stress state of a piecewise-homogeneous elastic body, which has a semi-infinite crack along the interface, under in-plane and antiplane loads is considered. One of the crack edges is reinforced by a rigid patch plate on a finite interval adjacent to the crack tip. The crack edges are loaded with specified stresses. The body is stretched at infinity by specified stresses. External forces with a given principal vector and moment act on the patch plate. The problem reduces to a Riemann-Hilbert boundary-value matrix problem with a piecewise-constant coefficient for two complex potentials in the plane case and for one in the antiplane case. The complex potentials are found explicitly using a Gaussian hypergeometric function. The stress state of the body close to the ends of the patch plate, one of which is also simultaneously the crack tip, is investigated. Stress intensity factors near the singular points are determined.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{LopesRodriguesVilaReal, author = {Lopes, Nuno and Rodrigues, Daniela and Vila Real, Paulo}, title = {ANALYSIS OF STEEL STRUCTURAL MEMBERS IN FIRE WITH SLENDER CROSS-SECTIONS THROUGH BEAM FINITE ELEMENTS APPLYING AN EFFECTIVE CONSTITUTIVE LAW}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2811}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28116}, pages = {6}, abstract = {Steel profiles with slender cross-sections are characterized by their high susceptibility to instability phenomena, especially local buckling, which are intensified under fire conditions. This work presents a study on numerical modelling of the behaviour of steel structural elements in case of fire with slender cross-sections. To accurately carry out these analyses it is necessary to take into account those local instability modes, which normally is only possible with shell finite elements. However, aiming at the development of more expeditious methods, particularly important for analysing complete structures in case of fire, recent studies have proposed the use of beam finite elements considering the presence of local buckling through the implementation of a new effective steel constitutive law. The objective of this work is to develop a study to validate this methodology using the program SAFIR. Comparisons are made between the results obtained applying the referred new methodology and finite element analyses using shell elements. The studies were made to laterally restrained beams, unrestrained beams, axially compressed columns and columns subjected to bending plus compression.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Rodehorst, author = {Rodehorst, Volker}, title = {EVALUATION OF THE METRIC TRIFOCAL TENSOR FOR RELATIVE THREE-VIEW ORIENTATION}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2817}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28178}, pages = {7}, abstract = {In photogrammetry and computer vision the trifocal tensor is used to describe the geometric relation between projections of points in three views. In this paper we analyze the stability and accuracy of the metric trifocal tensor for calibrated cameras. Since a minimal parameterization of the metric trifocal tensor is challenging, the additional constraints of the interior orientation are applied to the well-known projective 6-point and 7-point algorithms for three images. The experimental results show that the linear 7-point algorithm fails for some noise-free degenerated cases, whereas the minimal 6-point algorithm seems to be competitive even with realistic noise.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Rodrigues, author = {Rodrigues, M. Manuela}, title = {OPERATIONAL PROPERTIES OF THE LAGUERRE TRANSFORM}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2818}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28186}, pages = {5}, abstract = {The Laguerre polynomials appear naturally in many branches of pure and applied mathematics and mathematical physics. Debnath introduced the Laguerre transform and derived some of its properties. He also discussed the applications in study of heat conduction and to the oscillations of a very long and heavy chain with variable tension. An explicit boundedness for some class of Laguerre integral transforms will be present.}, subject = {Angewandte Informatik}, language = {en} } @article{Nogueira, author = {Nogueira, Priscilla}, title = {"Battlers" and their homes: About self-production of residences made by the brazilian new middle class}, series = {Social Inclusion}, journal = {Social Inclusion}, doi = {10.17645/si.v3i2.67}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31568}, pages = {44 -- 61}, abstract = {The article presents preliminary results and qualitative analysis obtained from the doctoral research provisory entitled "How do Brazilian 'battlers' reside?", which is in progress at the Institute for European Urban Studies, Bauhaus Univer-sity Weimar. It critically discusses the contradictions of the production of residences in Brazil made by an emerging so-cial group, lately called the Brazilian new middle class. For the last ten years, a number of government policies have provoked a general improvement of the purchasing power of the poor. Between those who completely depend on the government to survive and the upper middle class, there is a wide (about 100 million people) and economically stable lower middle group, which has found its own ways of dealing with its demand for housing. The conventional models of planning, building and buying are not suitable for their technical, financial and personal needs. Therefore, they are con-currently planners, constructors and residents, building and renovating their own properties themselves, but still with very limited education and technical knowledge and restricted access to good building materials and constructive ele-ments, formal technicians, architects or engineers. On the one hand, the result is an informal and more or less autono-mous self-production, with all sorts of technical problems and very interesting and creative spatial solutions to every-day domestic situations. On the other hand, the repercussions for urban space are questionable: although basic infrastructure conditions have improved, building densities are high and green areas are few. Lower middle class neigh-bourhoods present a restricted collective everyday life. They look like storage spaces for manpower; people who live to work in order to be able to consume—and build—what they could not before. One question is, to what extent the lat-est economic rise of Brazil has really resulted in social development for lower middle income families in the private sphere regarding their residences, and in the collective sphere, regarding the neighbourhoods they inhabit and the ur-ban space in general.}, subject = {Brasilien}, language = {en} } @inproceedings{Karaki, author = {Karaki, Ghada}, title = {SELECTION AND SCALING OF GROUND MOTION RECORDS FOR SEISMIC ANALYSIS USING AN OPTIMIZATION ALGORITHM}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2805}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28058}, pages = {7}, abstract = {The nonlinear time history analysis and seismic performance based methods require a set of scaled ground motions. The conventional procedure of ground motion selection is based on matching the motion properties, e.g. magnitude, amplitude, fault distance, and fault mechanism. The seismic target spectrum is only used in the scaling process following the random selection process. Therefore, the aim of the paper is to present a procedure to select a sets of ground motions from a built database of ground motions. The selection procedure is based on running an optimization problem using Dijkstra's algorithm to match the selected set of ground motions to a target response spectrum. The selection and scaling procedure of optimized sets of ground motions is presented by examining the analyses of nonlinear single degree of freedom systems.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{WiggenbrockSmarsly, author = {Wiggenbrock, Jens and Smarsly, Kay}, title = {A GENERIC FRAMEWORK SUPPORTING DISTRIBUTED COMPUTING IN ENGINEERING APPLICATIONS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2826}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28260}, pages = {9}, abstract = {Modern distributed engineering applications are based on complex systems consisting of various subsystems that are connected through the Internet. Communication and collaboration within an entire system requires reliable and efficient data exchange between the subsystems. Middleware developed within the web evolution during the past years provides reliable and efficient data exchange for web applications, which can be adopted for solving the data exchange problems in distributed engineering applications. This paper presents a generic approach for reliable and efficient data exchange between engineering devices using existing middleware known from web applications. Different existing middleware is examined with respect to the suitability in engineering applications. In this paper, a suitable middleware is shown and a prototype implementation simulating distributed wind farm control is presented and validated using several performance measurements.}, subject = {Angewandte Informatik}, language = {en} } @inproceedings{Neri, author = {Neri, Maria Luisa}, title = {Landscape and City during Fascism: Enrico del Debbio's Foro Mussolini}, series = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, booktitle = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, doi = {10.25643/bauhaus-universitaet.2387}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150504-23877}, pages = {1 -- 16}, abstract = {Beitr{\"a}ge zum Symposium „Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography". Weimar, 21.-22. November 2013}, subject = {St{\"a}dtebau}, language = {en} } @inproceedings{d’Almeida, author = {d'Almeida, Patr{\´i}cia Bento}, title = {Restelo Neighbourhood: Expanding the Capital of the Empire with the First Portuguese Urban Planner}, series = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, booktitle = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, doi = {10.25643/bauhaus-universitaet.2380}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150416-23802}, pages = {1 -- 13}, abstract = {Beitr{\"a}ge zum Symposium „Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography". Weimar, 21.-22. November 2013}, subject = {St{\"a}dtebau}, language = {en} } @phdthesis{RodriguezSchaeffer, author = {Rodr{\´i}guez Schaeffer, Alan Paul}, title = {Lighting in urban heritage: case study of Chiapa de Corzo, Chiapas, Mexico}, doi = {10.25643/bauhaus-universitaet.2421}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150630-24217}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {327}, abstract = {As human thought was developing, likewise, the technology used for illumination was growing. But a haul through history, reviewing its pages and analyzing it, inherently brings up old and new question, like: Is it possible to alter negatively the image of historic buildings and monuments through inadequate lighting to the degree of distorting the perception that people have of the work? and if so, what are the causes that generate it? Do the light designers take into consideration criteria to protect not only historic buildings and monuments, but also the environment? What are the consequences that may generate the inadequate lighting of urban heritage to the environment? What are the factors to consider for a proper illumination of urban heritage? The answers to these questions will help lay the foundation for proper illumination of the urban heritage, avoiding at the maximum the light pollution and the effects that it generates, seeking a balance and harmonious reconciliation between the technology, urban heritage and environment, taking as a framework and the case study the urban heritage of a city from the colonial era in southern Mexico, with pre-Hispanic roots and where today you can still see through its streets and buildings an atmosphere of mysticism reflection of their folklore and traditions, this city is known as Chiapa de Corzo, Chiapas.}, subject = {Konservierung}, language = {en} } @phdthesis{Arkarapotiwong, author = {Arkarapotiwong, Piyadech}, title = {THE INVESTIGATION OF LIVING HERITAGE ATTRIBUTES IN LIVING HERITAGE SITES}, doi = {10.25643/bauhaus-universitaet.2408}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150619-24086}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {303}, abstract = {The conservation of living heritage sites is a highly complex process. Two factors need careful consideration in order to achieve a balance in the management of such sites: the conservation demands of conservation experts for built heritage and the needs of local people for development of their heritage living space. The complexity of factors involved make for an interesting study of living heritage, taken up by this research in its main case study of the town of Nan in Thailand. Research into the historical background of Nan and its cultural heritage reveals a living heritage site, which is both unique and diverse. Present day Nan was examined using a variety of analysis tools, which were applied to data from interviews, empirical data, field surveys, and documents, in order to better understand the nature of the living heritage site and changing trends over time. Luang Prabang in Lao PDR, a World Heritage site since 1995, was also selected as a further case study with which to compare Nan's potential World Heritage status from a point of view of changes to living heritage attributes. The outcomes of the research indicate the importance of the management of the sites, which can be at risk of losing balance by focusing on one aspect of heritage to the detriment of the other. The conservation perspective, if allowed to dominate, as in Luang Prabang, can cause irreparable damage to the social fabric, where the development needs of the town are not met. This research concludes that a balance of power amongst stakeholders in the collaborative networks managing such sites is vital to sustaining a balance of living heritage attributes.}, subject = {Kulturerbe}, language = {en} } @phdthesis{CamposMedina, author = {Campos Medina, Fernando}, title = {The Role of Individuals in Socio-Urban Exclusion : A case study on the School Institution in Santiago de Chile}, doi = {10.25643/bauhaus-universitaet.2388}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150505-23888}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {184}, abstract = {This is a work concerned with the increasing processes of social exclusion in cities nowadays. In approaching this phenomenon, the research highlights how people interact with their institutional environments. This is also, perhaps centrally, an investigation into the possibility to engage an individual perspective to understand the transformation in urban experience, which is orienting society to new uses and forms of exclusion. Following the perspective deployed by the so-called "sociology of individuals" in French sociology or "reengagement of agency" in the Anglo-Saxon world; I claim that individuals as well as collectives are gaining increasing power to question and re-organize institutions. This re-organization, in the case of socio-urban institutions, is no guarantee for major levels in integration, cohesion, and equality. Unfortunately, social institutions are becoming hard in its exclusionary capabilities under people intervention during the last four decades. I believe that urban sociology is a field of struggle between different perspectives competing to "make sense" of social phenomena in cities. The orientation supported in this research is just one on many and it follows the roots of people and their life experiences within cities and how they influence the processes that shape the city. The last formulation is possibly not the clearest, because as we all know, references to "inhabitants" are presented in every variant of urban sociology. Nevertheless, there are not many variants focusing on peoples' capability to influence institutional environments and by this way affecting the urban condition in which they find themselves. The particular institution selected for this study is the "School". This thesis is organized around two parts: part one includes the conceptual framework, methodological approach, and historical contextualization; part two describes three case studies produced to analyse the forms of and the relations between individuals and school institution. Part one starts from a premise: within the context of declining welfare State in the case of industrialized countries, an important part of urban studies focuses on economic and spatial restructuration. Confronted with the same situation, a part of social sciences shifts to the individuals' agency and social uncertainty. This research is embedded in the last theoretical description presented above, thus, because it tries to observe urban processes from the perspective of the individual and outside of developed economies. In this sense, Latin America represents a fundamental reference because urban conditions are historically marked by weak institutional arrangements to integrating people and large levels of marginality and exclusion among population. In this scenario individuals' practices around inclusion-exclusion have an essential meaning in everyday life. Part two offers three study cases in which the relation between individuals and school institutions has been analyzed for the Metropolitan area of Santiago de Chile (MAS). Using different methodological resources an exhaustive account on three levels is presented: i) geo-referencing State intervention in public policies connected with neighborhood and schools to understand the form and extent of socio-urban exclusion in MAS, ii) narrative biographies applied to parents with children attending primary school, in order to reconstruct the familiar process of school selection and describing its impacts on the stabilization of school as an exclusionary device, and iii) autoethnography to describe in detail the temporal dimension involved in stabilizing actions which reinforces social mechanisms of urban integration-exclusion during the last three decades in Chile. A key argument advanced by this research proposes that: the way in which the idea of integration is enacted by people in their biographical careers imprints changes on the institutional orientation and by this way, contributes to the reorganization urban life. The high level of social exclusion in Santiago de Chile is not accountable without considering transformation in all socio-urban institutions, especially the school. No family considers social integration with people from a low social, economical or cultural background as relevant orientation for school selection. This particularity of the Chilean social reality is not derivable from any big capitalistic or modernization processes impacting our cities. Within the light of the thesis findings, I conclude that socio-urban institutions logics must be reassessment under the influences of people actions and representations. I also propose a consideration to major complementarities between urban studies and urban-institutions analysis. The school institutions is not just a sectorial field reserved to the researcher in education, on the contrary, it represent a key entrance to address people's experience in their institutional urban environments. The re-emergence of social and urban movements in 2010, under the "Arab Spring" or the "Chilean Student Movements", is not only a demonstration in the public space as result of major global trends. These situations are in essence, for this research, individuals gathering together and calling for recognition and autonomy inside institutional environment that tends to reject them. Similar situation was the focus of the Latin American urban sociology research, within the focus on grassroots and urban social movements at the end of the 1960s and beginning of the 1970s. In both cases, socio-urban institutions, unaware of recognition requirements claimed by inhabitants, are not beyond individual or collective reach. My main concern is to show that socio-urban institutions are constantly re-shaped as a result of individual action, what makes the difference, is the spirit that we all, socially, imprint on the logics of our socio-urban institutions, moving them to inclusion or exclusion.}, subject = {urban studies}, language = {en} } @inproceedings{Dattomo, author = {Dattomo, Nicla}, title = {Planning the Industrialization. The Technical and Theoretical Toolbox for the Post-War Program for the Industrial Development Areas of Southern Italy}, series = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, booktitle = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, doi = {10.25643/bauhaus-universitaet.2439}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150731-24398}, pages = {1 -- 9}, abstract = {Beitr{\"a}ge zum Symposium „Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography". Weimar, 21.-22. November 2013}, subject = {St{\"a}dtebau}, language = {en} } @inproceedings{Cravo, author = {Cravo, Salete A. F.}, title = {Restelo in Lisbon - The Non-implementation of the Original Urban Design by Faria da Costa during the Dictatorship of Ant{\´o}nio de Oliveira Salazar}, series = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, booktitle = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, doi = {10.25643/bauhaus-universitaet.2411}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150619-24111}, pages = {1 -- 17}, abstract = {Beitr{\"a}ge zum Symposium „Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography". Weimar, 21.-22. November 2013}, subject = {St{\"a}dtebau}, language = {en} } @inproceedings{Cabrita, author = {Cabrita, Maria Am{\´e}lia}, title = {Portuguese Social Housing under Dictatorship. A Morphological Analysis of Some Residential Agglomerations in Lisbon (1933-1950)}, series = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, booktitle = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, doi = {10.25643/bauhaus-universitaet.2440}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150731-24407}, pages = {1 -- 10}, abstract = {Beitr{\"a}ge zum Symposium „Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography". Weimar, 21.-22. November 2013}, subject = {St{\"a}dtebau}, language = {en} } @inproceedings{Beese, author = {Beese, Christine}, title = {About the Internationality of Urbanism: The Influence of International Town Planning Ideas upon Marcello Piacentini's Work}, series = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, booktitle = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, doi = {10.25643/bauhaus-universitaet.2409}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150619-24093}, pages = {1 -- 22}, abstract = {Beitr{\"a}ge zum Symposium „Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography". Weimar, 21.-22. November 2013}, subject = {St{\"a}dtebau}, language = {en} } @inproceedings{Birkholz, author = {Birkholz, Marie Luise}, title = {Granite on the Ground: Former Nazi Party Rally Grounds, Nuremberg/Germany. A brief introduction}, series = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, booktitle = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography}, doi = {10.25643/bauhaus-universitaet.2458}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150925-24587}, pages = {1 -- 12}, abstract = {Beitr{\"a}ge zum Symposium „Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography". Weimar, 21.-22. November 2013}, subject = {St{\"a}dtebau}, language = {en} } @masterthesis{Goedicke, type = {Bachelor Thesis}, author = {Goedicke, Glenn}, title = {M{\"o}gliche Schnittstellenverschiebungen zwischen Bau- und Nebent{\"a}tigkeiten auf ausdifferenzierten Baustellen aus arbeitsrechtlicher Sicht}, doi = {10.25643/bauhaus-universitaet.2419}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150629-24192}, school = {Bauhaus-Universit{\"a}t Weimar}, pages = {50}, abstract = {In der modernen Arbeitswelt ist es {\"u}blich betriebliche Aufgaben extern zu vergeben. Dieser Vorgang wird in der Wirtschaft Outsourcing genannt und beschr{\"a}nkt sich in der Regel auf Arbeiten, welche nicht zu den Kernkompetenzen eines Unternehmens geh{\"o}ren. Wenn diese Arbeiten durch spezialisierte Unternehmen {\"u}bernommen werden ergeben sich Potenziale, die weit {\"u}ber eine bloße Kostensenkung hinausgehen. Der Kern dieser Arbeit bezieht sich auf die Auslagerung von sogenannten Nebent{\"a}tigkeiten im Zusammenhang einer Bauwerksausf{\"u}hrung. Dabei werden die arbeitsrechtliche Situation, Machbarkeit und Sinnhaftigkeit analysiert. Das Arbeitsrecht im Baugewerbe ist {\"u}beraus komplex und von starren Regelungen gepr{\"a}gt. Die f{\"u}r allgemeinverbindlich erkl{\"a}rten Tarifvertr{\"a}ge gelten gemeinhin f{\"u}r alle Betriebe, die {\"u}berwiegend bauliche T{\"a}tigkeiten aus{\"u}ben. Problematisch wird die tarifliche Zuordnung f{\"u}r Betriebe, welche die Nebent{\"a}tigkeiten {\"u}bernehmen und f{\"u}r gew{\"o}hnlich nicht in den Geltungsbereich der Tarifvertr{\"a}ge fallen. Bei der Vergabe von Nebent{\"a}tigkeiten mit Hilfe von Werk- oder Dienstvertr{\"a}gen bedarf es einer genauen Kl{\"a}rung, ab wann eine unerlaubte Arbeitnehmer{\"u}berlassung beginnt. Im Rahmen dieser Arbeit soll untersucht werden, inwieweit eine Auslagerung der baulichen Nebent{\"a}tigkeiten durch eine Werk- oder Dienstvertragsvergabe an die Grenzen der arbeitsrechtlichen Gegebenheiten st{\"o}ßt. Zus{\"a}tzlich wird eine tarifliche Einordnung der T{\"a}tigkeiten vorgenommen.}, subject = {Arbeitsrecht}, language = {de} } @article{Bargstaedt, author = {Bargst{\"a}dt, Hans-Joachim}, title = {Challenges of BIM for Construction Site Operations}, series = {Procedia Engineering}, journal = {Procedia Engineering}, doi = {10.1016/j.proeng.2015.08.123}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170413-31218}, pages = {52 -- 59}, abstract = {Building Information Modeling is a powerful tool for the design and for a consistent set of data in a virtual storage. For the application in the phases of realization and on site it needs further development. The paper describes main challenges and main features, which will help the development of software to better service the needs of construction site managers}, subject = {Building Information Modeling}, language = {en} } @article{LahmerIlgLerch, author = {Lahmer, Tom and Ilg, J. and Lerch, Reinhard}, title = {Variance-based sensitivity analyses of piezoelectric models}, series = {Computer Modeling in Engineering \& Sciences}, journal = {Computer Modeling in Engineering \& Sciences}, pages = {105 -- 126}, abstract = {Variance-based sensitivity analyses of piezoelectric models}, subject = {Angewandte Mathematik}, language = {en} } @inproceedings{NguyenTuanLahmerDatchevaetal., author = {Nguyen-Tuan, Long and Lahmer, Tom and Datcheva, Maria and Stoimenova, Eugenia and Schanz, Tom}, title = {PARAMETER IDENTIFICATION APPLYING IN COMPLEX THERMO-HYDRO-MECHANICAL PROBLEMS LIKE THE DESIGN OF BUFFER ELEMENTS}, series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar}, editor = {G{\"u}rlebeck, Klaus and Lahmer, Tom}, organization = {Bauhaus-Universit{\"a}t Weimar}, issn = {1611-4086}, doi = {10.25643/bauhaus-universitaet.2816}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28162}, pages = {6}, abstract = {This study contributes to the identification of coupled THM constitutive model parameters via back analysis against information-rich experiments. A sampling based back analysis approach is proposed comprising both the model parameter identification and the assessment of the reliability of identified model parameters. The results obtained in the context of buffer elements indicate that sensitive parameter estimates generally obey the normal distribution. According to the sensitivity of the parameters and the probability distribution of the samples we can provide confidence intervals for the estimated parameters and thus allow a qualitative estimation on the identified parameters which are in future work used as inputs for prognosis computations of buffer elements. These elements play e.g. an important role in the design of nuclear waste repositories.}, subject = {Angewandte Informatik}, language = {en} } @article{ZhaoLuZhangetal., author = {Zhao, Jun-Hua and Lu, Lixin and Zhang, Zhiliang and Guo, Wanlin and Rabczuk, Timon}, title = {Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates}, series = {Computational Materials Science}, journal = {Computational Materials Science}, pages = {432 -- 438}, abstract = {Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates}, subject = {Angewandte Mathematik}, language = {en} } @article{BenZhaoZhangetal., author = {Ben, S. and Zhao, Jun-Hua and Zhang, Yancheng and Rabczuk, Timon}, title = {The interface strength and debonding for composite structures: review and recent developments}, series = {Composite Structures}, journal = {Composite Structures}, abstract = {The interface strength and debonding for composite structures: review and recent developments}, subject = {Angewandte Mathematik}, language = {en} } @article{ZhaoJiaWeietal., author = {Zhao, Jun-Hua and Jia, Yue and Wei, Ning and Rabczuk, Timon}, title = {Binding energy and mechanical stability of two parallel and crossing carbon nanotubes}, series = {Journal of Applied Mechanics}, journal = {Journal of Applied Mechanics}, abstract = {Binding energy and mechanical stability of two parallel and crossing carbon nanotubes}, subject = {Angewandte Mathematik}, language = {en} } @article{KumarSinghMishraetal., author = {Kumar, S. and Singh, I. and Mishra, B.K. and Rabczuk, Timon}, title = {Modeling and Simulation of Kinked Cracks by Virtual Node XFEM}, series = {Computer Methods in Applied Mechanics and Engineering}, journal = {Computer Methods in Applied Mechanics and Engineering}, pages = {1425 -- 1466}, abstract = {Modeling and Simulation of Kinked Cracks by Virtual Node XFEM}, subject = {Angewandte Mathematik}, language = {en} } @article{JiangRabczukPark, author = {Jiang, Jin-Wu and Rabczuk, Timon and Park, Harold S.}, title = {A Stillinger-Weber Potential for Single-Layer Black Phosphorus, and the Importance of Cross-Pucker Interactions for Negative Poisson's Ratio and Edge Stress-Induced Bending}, series = {Nanoscale}, journal = {Nanoscale}, doi = {10.1039/C4NR07341J}, abstract = {The distinguishing structural feature of single-layered black phosphorus is its puckered structure, which leads to many novel physical properties. In this work, we first present a new parameterization of the Stillinger-Weber potential for single-layered black phosphorus. In doing so, we reveal the importance of a cross-pucker interaction term in capturing its unique mechanical properties, such as a negative Poisson's ratio. In particular, we show that the cross-pucker interaction enables the pucker to act as a re-entrant hinge, which expands in the lateral direction when it is stretched in the longitudinal direction. As a consequence, single-layered black phosphorus has a negative Poisson's ratio in the direction perpendicular to the atomic plane. As an additional demonstration of the impact of the cross-pucker interaction, we show that it is also the key factor that enables capturing the edge stress-induced bending of single-layered black phosphorus that has been reported in ab initio calculations.}, subject = {Angewandte Mathematik}, language = {en} } @article{TalebiSilaniRabczuk, author = {Talebi, Hossein and Silani, Mohammad and Rabczuk, Timon}, title = {Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation}, series = {Advances in Engineering Software}, journal = {Advances in Engineering Software}, pages = {82 -- 92}, abstract = {Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation}, subject = {Angewandte Mathematik}, language = {en} } @article{GhasemiBrighentiZhuangetal., author = {Ghasemi, Hamid and Brighenti, Roberto and Zhuang, Xiaoying and Muthu, Jacob and Rabczuk, Timon}, title = {Optimum fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach}, series = {Structural and Multidisciplinary Optimization}, journal = {Structural and Multidisciplinary Optimization}, pages = {99 -- 112}, abstract = {Optimum _ber content and distribution in _ber-reinforced solids using a reliability and NURBS based sequential optimization approach}, subject = {Angewandte Mathematik}, language = {en} } @article{AreiasRabczukCesardeSaetal., author = {Areias, Pedro and Rabczuk, Timon and Cesar de Sa, J.M. and Jorge, R.N.}, title = {A semi-implicit _nite strain shell algorithm using in-plane strains based on least-squares}, series = {Computational Mechanics}, journal = {Computational Mechanics}, abstract = {A semi-implicit _nite strain shell algorithm using in-plane strains based on least-squares}, subject = {Angewandte Mathematik}, language = {en} } @inproceedings{TreyerKleinKoenigetal., author = {Treyer, Lukas and Klein, Bernhard and K{\"o}nig, Reinhard and Meixner, Christine}, title = {Lightweight urban computation interchange (LUCI) system}, series = {Proceedings}, booktitle = {Proceedings}, publisher = {FOSS4G}, address = {Seoul, South Korea}, doi = {10.25643/bauhaus-universitaet.2598}, url = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160622-25982}, pages = {12}, abstract = {In this paper we introduce LUCI, a Lightweight Urban Calculation Interchange system, designed to bring the advantages of a calculation and content co-ordination system to small planning and design groups by the means of an open source middle-ware. The middle-ware focuses on problems typical to urban planning and therefore features a geo-data repository as well as a job runtime administration, to coordinate simulation models and its multiple views. The described system architecture is accompanied by two exemplary use cases that have been used to test and further develop our concepts and implementations.}, language = {en} }