@article{GhasemiBrighentiZhuangetal.,
  author    = {Ghasemi, Hamid and Brighenti, Roberto and Zhuang, Xiaoying and Muthu, Jacob and Rabczuk, Timon},
  title     = {Optimum fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach},
  series = {Structural and Multidisciplinary Optimization},
  journal   = {Structural and Multidisciplinary Optimization},
  pages     = {99 -- 112},
  abstract  = {Optimum _ber content and distribution in _ber-reinforced solids using a reliability and NURBS based sequential optimization approach},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{MuellerLudwigBenHahaetal.,
  author    = {M{\"u}ller, Matthias and Ludwig, Horst-Michael and Ben Haha, Mohsen and Zajac, Maciej},
  title     = {Optimization of multi-component cements containing clinker, slag, V-fly ash, limestone},
  series = {Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2},
  booktitle = {Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2},
  editor    = {Ludwig, Horst-Michael},
  organization    = {F.A.Finger-Institut f{\"u}r Baustoffkunde, Bauhaus-Universit{\"a}t Weimar},
  isbn      = {978-3-00-050225-5 (Bauhaus-Universit{\"a}tsverlag Weimar)},
  doi       = {10.25643/bauhaus-universitaet.4870},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240507-48700},
  pages     = {424-431},
  abstract  = {The aim of this study was to investigate the optimization of the strength development of quaternary cements with 50 \% clinker by a variation of the particle size distribution of the components GGBFS, fly ash and limestone powder. By balancing the overall PSD of the cement by using unprocessed fly ash and coarse limestone powder in combination with a very fine GGBFS, the water demand of the resulting quaternary cements remained unaltered, while the compressive strength of the cements was increased significantly after 7d, 28 and 56d. As can be expected, the quaternary cement with 30 wt.\% of the fine slag exhibited a stronger strength increase (about 18 \% after 28 d) than the cements with only 20 wt.\% slag (about 10\% after 28d).},
  subject      = {Zement},
  language  = {en}
}
@inproceedings{StokmaierClassSchulenbergetal.,
  author    = {Stokmaier, Markus and Class, A.G. and Schulenberg, T. and Lahey Jr., R.T},
  title     = {OPTIMISING ACOUSTIC RESONATORS FOR SONOFUSION EXPERIMENTS WITH EVOLUTIONARY ALGORITHMS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2820},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28202},
  pages     = {8},
  abstract  = {The sizing of simple resonators like guitar strings or laser mirrors is directly connected to the wavelength and represents no complex optimisation problem. This is not the case with liquid-filled acoustic resonators of non-trivial geometries, where several masses and stiffnesses of the structure and the fluid have to fit together. This creates a scenario of many competing and interacting resonances varying in relative strength and frequency when design parameters change. Hence, the resonator design involves a parameter-tuning problem with many local optima. As its solution evolutionary algorithms (EA) coupled to a forced-harmonic FE simulation are presented. A new hybrid EA is proposed and compared to two state-of-theart EAs based on selected test problems. The motivating background is the search for better resonators suitable for sonofusion experiments where extreme states of matter are sought in collapsing cavitation bubbles.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{HoelterMahmoudiSchanz,
  author    = {H{\"o}lter, Raoul and Mahmoudi, Elham and Schanz, Tom},
  title     = {OPTIMAL SENSOR LOCATION FOR PARAMETER IDENTIFICATION IN SOFT CLAY},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2800},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28008},
  pages     = {6},
  abstract  = {Performing parameter identification prior to numerical simulation is an essential task in geotechnical engineering. However, it has to be kept in mind that the accuracy of the obtained parameter is closely related to the chosen experimental setup, such as the number of sensors as well as their location. A well considered position of sensors can increase the quality of the measurement and to reduce the number of monitoring points. This Paper illustrates this concept by means of a loading device that is used to identify the stiffness and permeability of soft clays. With an initial setup of the measurement devices the pore water pressure and the vertical displacements are recorded and used to identify the afore mentioned parameters. Starting from these identified parameters, the optimal measurement setup is investigated with a method based on global sensitivity analysis. This method shows an optimal sensor location assuming three sensors for each measured quantity, and the results are discussed.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Rodrigues,
  author    = {Rodrigues, M. Manuela},
  title     = {OPERATIONAL PROPERTIES OF THE LAGUERRE TRANSFORM},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2818},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28186},
  pages     = {5},
  abstract  = {The Laguerre polynomials appear naturally in many branches of pure and applied mathematics and mathematical physics. Debnath introduced the Laguerre transform and derived some of its properties. He also discussed the applications in study of heat conduction and to the oscillations of a very long and heavy chain with variable tension. An explicit boundedness for some class of Laguerre integral transforms will be present.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{AlYasiriGuerlebeck,
  author    = {Al-Yasiri, Zainab and G{\"u}rlebeck, Klaus},
  title     = {ON BOUNDARY VALUE PROBLEMS FOR P-LAPLACE AND P-DIRAC EQUATIONS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2792},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27928},
  pages     = {8},
  abstract  = {The p-Laplace equation is a nonlinear generalization of the Laplace equation. This generalization is often used as a model problem for special types of nonlinearities. The p-Laplace equation can be seen as a bridge between very general nonlinear equations and the linear Laplace equation. The aim of this paper is to solve the p-Laplace equation for 2 < p < 3 and to find strong solutions. The idea is to apply a hypercomplex integral operator and spatial function theoretic methods to transform the p-Laplace equation into the p-Dirac equation. This equation will be solved iteratively by using a fixed point theorem.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@techreport{KoenigTapiasSchmitt,
  author    = {K{\"o}nig, Reinhard and Tapias, Estefania and Schmitt, Gerhard},
  title     = {New Methods in Urban Analysis and Simulation: Documentation of teaching results from the spring semester 2015},
  organization    = {ETH Zurich},
  doi       = {10.25643/bauhaus-universitaet.2505},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25052},
  pages     = {76},
  abstract  = {Documentation of teaching results from the spring semester 2015 at the chair of Information Architecture at ETH Zurich},
  subject      = {Architektur},
  language  = {en}
}
@article{ArashRabczukJiang,
  author    = {Arash, Behrouz and Rabczuk, Timon and Jiang, Jin-Wu},
  title     = {Nanoresonators and their applications: a state of the art review},
  series = {Applied Physics Reviews},
  journal   = {Applied Physics Reviews},
  abstract  = {Nanoresonators and their applications: a state of the art review},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@masterthesis{Goedicke,
  type      = {Bachelor Thesis},
  author    = {Goedicke, Glenn},
  title     = {M{\"o}gliche Schnittstellenverschiebungen zwischen Bau- und Nebent{\"a}tigkeiten auf ausdifferenzierten Baustellen aus arbeitsrechtlicher Sicht},
  doi       = {10.25643/bauhaus-universitaet.2419},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150629-24192},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {50},
  abstract  = {In der modernen Arbeitswelt ist es {\"u}blich betriebliche Aufgaben extern zu vergeben. Dieser Vorgang wird in der Wirtschaft Outsourcing genannt und beschr{\"a}nkt sich in der Regel auf Arbeiten, welche nicht zu den Kernkompetenzen eines Unternehmens geh{\"o}ren. Wenn diese Arbeiten durch spezialisierte Unternehmen {\"u}bernommen werden ergeben sich Potenziale, die weit {\"u}ber eine bloße Kostensenkung hinausgehen. Der Kern dieser Arbeit bezieht sich auf die Auslagerung von sogenannten Nebent{\"a}tigkeiten im Zusammenhang einer Bauwerksausf{\"u}hrung. Dabei werden die arbeitsrechtliche Situation, Machbarkeit und Sinnhaftigkeit analysiert. Das Arbeitsrecht im Baugewerbe ist {\"u}beraus komplex und von starren Regelungen gepr{\"a}gt. Die f{\"u}r allgemeinverbindlich erkl{\"a}rten Tarifvertr{\"a}ge gelten gemeinhin f{\"u}r alle Betriebe, die {\"u}berwiegend bauliche T{\"a}tigkeiten aus{\"u}ben. Problematisch wird die tarifliche Zuordnung f{\"u}r Betriebe, welche die Nebent{\"a}tigkeiten {\"u}bernehmen und f{\"u}r gew{\"o}hnlich nicht in den Geltungsbereich der Tarifvertr{\"a}ge fallen. Bei der Vergabe von Nebent{\"a}tigkeiten mit Hilfe von Werk- oder Dienstvertr{\"a}gen bedarf es einer genauen Kl{\"a}rung, ab wann eine unerlaubte Arbeitnehmer{\"u}berlassung beginnt. Im Rahmen dieser Arbeit soll untersucht werden, inwieweit eine Auslagerung der baulichen Nebent{\"a}tigkeiten durch eine Werk- oder Dienstvertragsvergabe an die Grenzen der arbeitsrechtlichen Gegebenheiten st{\"o}ßt. Zus{\"a}tzlich wird eine tarifliche Einordnung der T{\"a}tigkeiten vorgenommen.},
  subject      = {Arbeitsrecht},
  language  = {de}
}
@article{Birkholz,
  author    = {Birkholz, Marie Luise},
  title     = {M{\"a}chtiger Boden. Essay {\"u}ber den Versuch, einen Staatsapparat zu erlaufen},
  series = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung},
  volume    = {2015},
  journal   = {sub\urban. Zeitschrift f{\"u}r Kritische Stadtforschung},
  number    = {Band 3, Heft 2},
  publisher = {ub\urban e.V.},
  address   = {Berlin},
  doi       = {10.36900/suburban.v3i2.200},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20220112-45591},
  pages     = {141 -- 154},
  abstract  = {Der Text folgt in essayistischer Form einem Spaziergang durch das politische Zentrum Bras{\´i}lias in Brasilien. Die Konzentration liegt auf der Gestaltung des Bodens. Wie ist die Planhauptstadt „vom Reißbrett" in der Horizontalen gestaltet? Wie sehen repr{\"a}sentative Pl{\"a}tze einer Stadt aus, die vor allem f{\"u}r Autos gebaut worden ist? Der forschende Blick liegt auf dem erlebten Ist-Zustand und wird assoziativ mit Ergebnissen der Forschungsarbeit aus Deutschland reflektiert. „M{\"a}chtiger Boden" entstand als Satellit zur aktuellen Forschung der Autorin im Rahmen eines Aufenthalts in Brasilien.},
  subject      = {Brasilia},
  language  = {de}
}
@article{MortazaviRabczuk,
  author    = {Mortazavi, Bohayra and Rabczuk, Timon},
  title     = {Multiscale modeling of heat conduction in graphene laminates},
  series = {Carbon},
  journal   = {Carbon},
  pages     = {1 -- 7},
  abstract  = {Multiscale modeling of heat conduction in graphene laminates},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{IlyaniAkmarKramerRabczuk,
  author    = {Ilyani Akmar, A.B. and Kramer, O. and Rabczuk, Timon},
  title     = {Multi-objective evolutionary optimization of sandwich structures: An evaluation by elitist non-dominated sorting evolution strategy},
  series = {American Journal of Engineering and Applied Sciences},
  journal   = {American Journal of Engineering and Applied Sciences},
  doi       = {10.3844/ajeassp.2015.185.201},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170418-31402},
  pages     = {185 -- 201},
  abstract  = {In this study, an application of evolutionary multi-objective optimization algorithms on the optimization of sandwich structures is presented. The solution strategy is known as Elitist Non-Dominated Sorting Evolution Strategy (ENSES) wherein Evolution Strategies (ES) as Evolutionary Algorithm (EA) in the elitist Non-dominated Sorting Genetic algorithm (NSGA-II) procedure. Evolutionary algorithm seems a compatible approach to resolve multi-objective optimization problems because it is inspired by natural evolution, which closely linked to Artificial Intelligence (AI) techniques and elitism has shown an important factor for improving evolutionary multi-objective search. In order to evaluate the notion of performance by ENSES, the well-known study case of sandwich structures are reconsidered. For Case 1, the goals of the multi-objective optimization are minimization of the deflection and the weight of the sandwich structures. The length, the core and skin thicknesses are the design variables of Case 1. For Case 2, the objective functions are the fabrication cost, the beam weight and the end deflection of the sandwich structures. There are four design variables i.e., the weld height, the weld length, the beam depth and the beam width in Case 2. Numerical results are presented in terms of Paretooptimal solutions for both evaluated cases.},
  subject      = {Optimierung},
  language  = {en}
}
@article{MortazaviPereiraJiangetal.,
  author    = {Mortazavi, Bohayra and Pereira, Luiz Felipe C. and Jiang, Jin-Wu and Rabczuk, Timon},
  title     = {Modelling heat conduction in polycrystalline hexagonal boron-nitride films},
  series = {Scientific Reports},
  journal   = {Scientific Reports},
  doi       = {10.1038/srep13228},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31534},
  abstract  = {We conducted extensive molecular dynamics simulations to investigate the thermal conductivity of polycrystalline hexagonal boron-nitride (h-BN) films. To this aim, we constructed large atomistic models of polycrystalline h-BN sheets with random and uniform grain configuration. By performing equilibrium molecular dynamics (EMD) simulations, we investigated the influence of the average grain size on the thermal conductivity of polycrystalline h-BN films at various temperatures. Using the EMD results, we constructed finite element models of polycrystalline h-BN sheets to probe the thermal conductivity of samples with larger grain sizes. Our multiscale investigations not only provide a general viewpoint regarding the heat conduction in h-BN films but also propose that polycrystalline h-BN sheets present high thermal conductivity comparable to monocrystalline sheets.},
  subject      = {W{\"a}rmeleitf{\"a}higkeit},
  language  = {en}
}
@article{KumarSinghMishraetal.,
  author    = {Kumar, S. and Singh, I. and Mishra, B.K. and Rabczuk, Timon},
  title     = {Modeling and Simulation of Kinked Cracks by Virtual Node XFEM},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {1425 -- 1466},
  abstract  = {Modeling and Simulation of Kinked Cracks by Virtual Node XFEM},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Jia,
  author    = {Jia, Yue},
  title     = {Methods based on B-splines for model representation, numerical analysis and image registration},
  doi       = {10.25643/bauhaus-universitaet.2484},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20151210-24849},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {200},
  abstract  = {The thesis consists of inter-connected parts for modeling and analysis using newly developed isogeometric methods. The main parts are reproducing kernel triangular B-splines, extended isogeometric analysis for solving weakly discontinuous problems, collocation methods using superconvergent points, and B-spline basis in image registration applications. Each topic is oriented towards application of isogeometric analysis basis functions to ease the process of integrating the modeling and analysis phases of simulation. First, we develop reproducing a kernel triangular B-spline-based FEM for solving PDEs. We review the triangular B-splines and their properties. By definition, the triangular basis function is very flexible in modeling complicated domains. However, instability results when it is applied for analysis. We modify the triangular B-spline by a reproducing kernel technique, calculating a correction term for the triangular kernel function from the chosen surrounding basis. The improved triangular basis is capable to obtain the results with higher accuracy and almost optimal convergence rates. Second, we propose an extended isogeometric analysis for dealing with weakly discontinuous problems such as material interfaces. The original IGA is combined with XFEM-like enrichments which are continuous functions themselves but with discontinuous derivatives. Consequently, the resulting solution space can approximate solutions with weak discontinuities. The method is also applied to curved material interfaces, where the inverse mapping and the curved triangular elements are considered. Third, we develop an IGA collocation method using superconvergent points. The collocation methods are efficient because no numerical integration is needed. In particular when higher polynomial basis applied, the method has a lower computational cost than Galerkin methods. However, the positions of the collocation points are crucial for the accuracy of the method, as they affect the convergent rate significantly. The proposed IGA collocation method uses superconvergent points instead of the traditional Greville abscissae points. The numerical results show the proposed method can have better accuracy and optimal convergence rates, while the traditional IGA collocation has optimal convergence only for even polynomial degrees. Lastly, we propose a novel dynamic multilevel technique for handling image registration. It is application of the B-spline functions in image processing. The procedure considered aims to align a target image from a reference image by a spatial transformation. The method starts with an energy function which is the same as a FEM-based image registration. However, we simplify the solving procedure, working on the energy function directly. We dynamically solve for control points which are coefficients of B-spline basis functions. The new approach is more simple and fast. Moreover, it is also enhanced by a multilevel technique in order to prevent instabilities. The numerical testing consists of two artificial images, four real bio-medical MRI brain and CT heart images, and they show our registration method is accurate, fast and efficient, especially for large deformation problems.},
  subject      = {Finite-Elemente-Methode},
  language  = {en}
}
@article{MortazaviCunibertiRabczuk,
  author    = {Mortazavi, Bohayra and Cuniberti, G. and Rabczuk, Timon},
  title     = {Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {285 -- 289},
  abstract  = {Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{TreyerKleinKoenigetal.,
  author    = {Treyer, Lukas and Klein, Bernhard and K{\"o}nig, Reinhard and Meixner, Christine},
  title     = {Lightweight urban computation interchange (LUCI) system},
  series = {Proceedings},
  booktitle = {Proceedings},
  publisher = {FOSS4G},
  address   = {Seoul, South Korea},
  doi       = {10.25643/bauhaus-universitaet.2598},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160622-25982},
  pages     = {12},
  abstract  = {In this paper we introduce LUCI, a Lightweight Urban Calculation Interchange system, designed to bring the advantages of a calculation and content co-ordination system to small planning and design groups by the means of an open source middle-ware. The middle-ware focuses on problems typical to urban planning and therefore features a geo-data repository as well as a job runtime administration, to coordinate simulation models and its multiple views. The described system architecture is accompanied by two exemplary use cases that have been used to test and further develop our concepts and implementations.},
  language  = {en}
}
@inproceedings{TreyerKleinKoenigetal.,
  author    = {Treyer, Lukas and Klein, Bernhard and K{\"o}nig, Reinhard and Meixner, Christine},
  title     = {Lightweight urban computation interchange (LUCI) system},
  series = {FOSS4G 2015 Conference},
  booktitle = {FOSS4G 2015 Conference},
  publisher = {FOSS4G},
  address   = {Seoul, South Korea},
  doi       = {10.25643/bauhaus-universitaet.2504},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25042},
  pages     = {12},
  abstract  = {In this paper we introduce LUCI, a Lightweight Urban Calculation Interchange system, designed to bring the advantages of a calculation and content co-ordination system to small planning and design groups by the means of an open source middle-ware. The middle-ware focuses on problems typical to urban planning and therefore features a geo-data repository as well as a job runtime administration, to coordinate simulation models and its multiple views. The described system architecture is accompanied by two exemplary use cases that have been used to test and further develop our concepts and implementations.},
  subject      = {Architektur},
  language  = {en}
}
@phdthesis{RodriguezSchaeffer,
  author    = {Rodr{\´i}guez Schaeffer, Alan Paul},
  title     = {Lighting in urban heritage: case study of Chiapa de Corzo, Chiapas, Mexico},
  doi       = {10.25643/bauhaus-universitaet.2421},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150630-24217},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {327},
  abstract  = {As human thought was developing, likewise, the technology used for illumination was growing. But a haul through history, reviewing its pages and analyzing it, inherently brings up old and new question, like: Is it possible to alter negatively the image of historic buildings and monuments through inadequate lighting to the degree of distorting the perception that people have of the work? and if so, what are the causes that generate it? Do the light designers take into consideration criteria to protect not only historic buildings and monuments, but also the environment? What are the consequences that may generate the inadequate lighting of urban heritage to the environment? What are the factors to consider for a proper illumination of urban heritage? The answers to these questions will help lay the foundation for proper illumination of the urban heritage, avoiding at the maximum the light pollution and the effects that it generates, seeking a balance and harmonious reconciliation between the technology, urban heritage and environment, taking as a framework and the case study the urban heritage of a city from the colonial era in southern Mexico, with pre-Hispanic roots and where today you can still see through its streets and buildings an atmosphere of mysticism reflection of their folklore and traditions, this city is known as Chiapa de Corzo, Chiapas.},
  subject      = {Konservierung},
  language  = {en}
}
@inproceedings{Neri,
  author    = {Neri, Maria Luisa},
  title     = {Landscape and City during Fascism: Enrico del Debbio's Foro Mussolini},
  series = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography},
  booktitle = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography},
  doi       = {10.25643/bauhaus-universitaet.2387},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150504-23877},
  pages     = {1 -- 16},
  abstract  = {Beitr{\"a}ge zum Symposium „Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography". Weimar, 21.-22. November 2013},
  subject      = {St{\"a}dtebau},
  language  = {en}
}
@phdthesis{Chen,
  author    = {Chen, Hsi-Jen},
  title     = {Kulturelle Unterschiede bei der Nutzung von Smartphones in Deutschland, China und Taiwan},
  doi       = {10.25643/bauhaus-universitaet.2351},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150223-23517},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {230},
  abstract  = {Theoretischer Teil: Durch den Vergleich der Daten, die sowohl von den Instituten bzw. Statistikunternehmen z. B. Google, Bundesnetzagentur und Statista in Deutschland, 中国互联网络信息中心 in China, FIND in Taiwan usw. zur Verf{\"u}gung gestellt wurden, als auch durch die von mir durchgef{\"u}hrten Umfragen in den jeweiligen L{\"a}ndern, sowie durch die Interviews in Weimar, zeigen sich die kulturellen Unterschiede sowie die Gemeinsamkeiten bei der Nutzung des Smartphones. Dar{\"u}ber hinaus ergaben sich noch einige Konsequenzen bei den Interpretationen dieser Ergebnisse, die eng mit der Entstehung der kulturellen Unterschiede zusammenh{\"a}ngen. Praktischer Teil: Der erste Entwurf ist eine visuelle Tastatur. Um die Bildschirmtastatur zu verbessern, versucht type right ! (der Name meines Entwurfs) das Problem von Vertippen beim Eingeben zu l{\"o}sen. type right ! hat zwei Schwerpunkte: 1. ge{\"a}nderte Positionen der Buchstaben und Zeichen und 2. ge{\"a}nderte Form der Taste. Der zweite Entwurf handelt von einem Konzept einer App f{\"u}r die Integrationsm{\"o}glichkeit der Kommunikation.},
  subject      = {Smartphone},
  language  = {de}
}
@article{ThaiNguyenXuanBordasetal.,
  author    = {Thai, Chien H. and Nguyen-Xuan, Hung and Bordas, St{\´e}phane Pierre Alain and Nguyen-Thanh, Nhon and Rabczuk, Timon},
  title     = {Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory},
  series = {Mechanics of Advanced Materials and Structures},
  journal   = {Mechanics of Advanced Materials and Structures},
  pages     = {451 -- 469},
  abstract  = {Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Lehmann,
  author    = {Lehmann, Martin},
  title     = {Investigations of the Loadbearing Behaviour of Timber Bending Beams Reinforced Using Prestressed CFRP-Lamellas},
  doi       = {10.25643/bauhaus-universitaet.2456},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150916-24566},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {164},
  abstract  = {The refurbishment of old buildings often goes hand in hand with an increase in both the dead and live loads. The latter, combined with the higher safety factors, often make the reinforcement of the old structures necessary. Most reinforcement methods involve transforming a structural timber member into a composite beam. Composite sections have a long tradition in timber construction. In the early days, multiple timber beams were connected with interlocking tooth and wooden shear connecters, which resulted in an elastic connection. Although historical timber structures are frequently upgraded, no method has yet been established and fully accepted by all stakeholders such as owners, builders, architects, engineers and cultural heritage organisations. Carbon fibre-reinforced polymers (CFRP) have already shown their efficiency in structural reinforcement especially in concrete structures. Moreover, previous studies have shown that CFRP has the potential to meet the expectations of all parties involved. In order to reach the service-limit state, a high amount of carbon fibres has to be used, or considering the cost of reinforcement, prestress has to be applied. However, prestressing often goes hand-in-hand with delaminating issues. The camber method presented here offers an efficient solution for prestressing timber bending members and overcoming the known obstacles. In the method proposed, the timber beam is cambered using an adjustable prop at midspan during the bonding of the CRFP-lamella to the lower side of the bending member. After curing the adhesive, the prop is removed and the prestressed composite beam is ready to be used. The prestress introduced in the system is not constant, but has a triangular shape and peaks at midspan, where it is used the most. The prestress force, which declines towards the end of the beam, leads to a constant shear stress over the whole length of the reinforcement,avoiding a concentrated anchorage zone. An analytical calculation model has been developed to calculate and design prestressed timber- bending members using the camber method. Numerical modelling, using a multi-surface plasticity model for timber, confirmed the results from the analytical model, and clearly reduced delaminating issues, comparing very favourably to traditional prestressing methods. The experimental parametric study, including the determination of the short-term loadbearing capacity of structural-sized beams, showed agreement with the analytical and numerical calculation. The prestressed reinforcement showed a benefit of nearly 50\% towards the ultimate-limit state and up to 70\% towards the service-limit state. Calculations revealed that the use of high modulus CFRP allows even higher benefits, depending on the configurations and requirements. The long-term design of the prestressed composite beam was investigated by extending the analytical model. The creep of the timber leads to a load transfer from the timber towards the CFRP, and therefore increases the benefit towards the ultimatelimit design. Applying high modulus CFRP-lamellas allows for a complete utilisation of the design capacity of timber and carbon fibre-reinforced polymer. The thorough investigation conducted demonstrated that the camber method is an efficient technique for prestressing and reinforcing timber-bending members. Furthermore, the calculation model presented allows for a safe design and estimation of long-term behaviour.},
  subject      = {Holzbau},
  language  = {en}
}
@article{Koenig,
  author    = {K{\"o}nig, Reinhard},
  title     = {Interview on Information Architecture},
  series = {Swiss Architecture in the Moving Image},
  journal   = {Swiss Architecture in the Moving Image},
  doi       = {10.25643/bauhaus-universitaet.2507},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20180422-25078},
  pages     = {151 -- 154},
  abstract  = {Interview on Information Architecture},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{OPUS4-2451,
  title     = {International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2451},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150828-24515},
  pages     = {230},
  abstract  = {The 20th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering will be held at the Bauhaus University Weimar from 20th till 22nd July 2015. Architects, computer scientists, mathematicians, and engineers from all over the world will meet in Weimar for an interdisciplinary exchange of experiences, to report on their results in research, development and practice and to discuss. The conference covers a broad range of research areas: numerical analysis, function theoretic methods, partial differential equations, continuum mechanics, engineering applications, coupled problems, computer sciences, and related topics. Several plenary lectures in aforementioned areas will take place during the conference. We invite architects, engineers, designers, computer scientists, mathematicians, planners, project managers, and software developers from business, science and research to participate in the conference!},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{GhasemiKerfridenBordasetal.,
  author    = {Ghasemi, Hamid and Kerfriden, Pierre and Bordas, St{\´e}phane Pierre Alain and Muthu, Jacob and Zi, Goangseup and Rabczuk, Timon},
  title     = {Interfacial shear stress optimization in sandwich beams with polymeric core using nonuniform distribution of reinforcing ingredients},
  series = {Composite Structures},
  journal   = {Composite Structures},
  pages     = {221 -- 230},
  abstract  = {Interfacial shear stress optimization in sandwich beams with polymeric core using nonuniform distribution of reinforcing ingredients},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{SmarslyTauscher,
  author    = {Smarsly, Kay and Tauscher, Eike},
  title     = {IFC-BASED MONITORING INFORMATION MODELING FOR DATA MANAGEMENT IN STRUCTURAL HEALTH MONITORING},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2823},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28237},
  pages     = {7},
  abstract  = {This conceptual paper discusses opportunities and challenges towards the digital representation of structural health monitoring systems using the Industry Foundation Classes (IFC) standard. State-of-the-art sensor nodes, collecting structural and environmental data from civil infrastructure systems, are capable of processing and analyzing the data sets directly on-board the nodes. Structural health monitoring (SHM) based on sensor nodes that possess so called "on-chip intelligence" is, in this study, referred to as "intelligent SHM", and the infrastructure system being equipped with an intelligent SHM system is referred to as "intelligent infrastructure". Although intelligent SHM will continue to grow, it is not possible, on a well-defined formalism, to digitally represent information about sensors, about the overall SHM system, and about the monitoring strategies being implemented ("monitoring-related information"). Based on a review of available SHM regulations and guidelines as well as existing sensor models and sensor modeling languages, this conceptual paper investigates how to digitally represent monitoring-related information in a semantic model. With the Industry Foundation Classes, there exists an open standard for the digital representation of building information; however, it is not possible to represent monitoring-related information using the IFC object model. This paper proposes a conceptual approach for extending the current IFC object model in order to include monitoring-related information. Taking civil infrastructure systems as an illustrative example, it becomes possible to adequately represent, process, and exchange monitoring-related information throughout the whole life cycle of civil infrastructure systems, which is referred to as monitoring information modeling (MIM). However, since this paper is conceptual, additional research efforts are required to further investigate, implement, and validate the proposed concepts and methods.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Birkholz,
  author    = {Birkholz, Marie Luise},
  title     = {Granite on the Ground: Former Nazi Party Rally Grounds, Nuremberg/Germany. A brief introduction},
  series = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography},
  booktitle = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography},
  doi       = {10.25643/bauhaus-universitaet.2458},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150925-24587},
  pages     = {1 -- 12},
  abstract  = {Beitr{\"a}ge zum Symposium „Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography". Weimar, 21.-22. November 2013},
  subject      = {St{\"a}dtebau},
  language  = {en}
}
@inproceedings{KrausshardeAlmeida,
  author    = {Kraußhar, Rolf S{\"o}ren and de Almeida, Regina},
  title     = {FUNDAMENTALS OF A WIMAN VALIRON THEORY FOR POLYMONOGENIC FUNCTIONS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2810},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28100},
  pages     = {6},
  abstract  = {In this paper we present some rudiments of a generalized Wiman-Valiron theory in the context of polymonogenic functions. In particular, we analyze the relations between different notions of growth orders and the Taylor coefficients. Our main intention is to look for generalizations of the Lindel¨of-Pringsheim theorem. In contrast to the classical holomorphic and the monogenic setting we only obtain inequality relations in the polymonogenic setting. This is due to the fact that the Almansi-Fischer decomposition of a polymonogenic function consists of different monogenic component functions where each of them can have a totally different kind of asymptotic growth behavior.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{OtholdVoss,
  author    = {Othold, Tim and Voss, Christiane},
  title     = {From media anthropology to anthropomediality},
  series = {Anthropological Notebooks},
  journal   = {Anthropological Notebooks},
  doi       = {10.25643/bauhaus-universitaet.3157},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31573},
  pages     = {75 -- 82},
  abstract  = {Media anthropology is a new and interdisciplinary field of research with very different subjects and methods that seems to be already heavily informed by a comparatively narrow understanding of media as mass media (e.g. TV, Internet, social web, etc.). Therefore, most theories in this field, at least implicitly, employ a hierarchical and often dichotomic preconception of the two poles of media-human relations, by analysing the operationalities and ontologies of the human and the media independently from one another. This article deviates from this line of thought by advocating an expanded, symmetrical and relational understanding of the terms media and human, taking them as always already intermingled facets of a broader dynamic configuration. Starting from a consideration of the historically powerful, yet overlooked media of the so-called habitat diorama, the heuristic concept of "anthropomediality" is to be developed. Eventually, this relational approach may open up a new, interesting field for interrogation of (media-)anthropological analysis in general.},
  subject      = {Medien},
  language  = {en}
}
@article{AreiasRabczukCesardeSaetal.,
  author    = {Areias, Pedro and Rabczuk, Timon and Cesar de Sa, J.M. and Garcao, J.E.},
  title     = {Finite strain quadrilateral shell using least-squares _t of relative Lagrangian in-plane strains},
  series = {Finite Elements in Analysis and Design},
  journal   = {Finite Elements in Analysis and Design},
  pages     = {26 -- 40},
  abstract  = {Finite strain quadrilateral shell using least-squares _t of relative Lagrangian in-plane strains},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{Rodehorst,
  author    = {Rodehorst, Volker},
  title     = {EVALUATION OF THE METRIC TRIFOCAL TENSOR FOR RELATIVE THREE-VIEW ORIENTATION},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2817},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28178},
  pages     = {7},
  abstract  = {In photogrammetry and computer vision the trifocal tensor is used to describe the geometric relation between projections of points in three views. In this paper we analyze the stability and accuracy of the metric trifocal tensor for calibrated cameras. Since a minimal parameterization of the metric trifocal tensor is challenging, the additional constraints of the interior orientation are applied to the well-known projective 6-point and 7-point algorithms for three images. The experimental results show that the linear 7-point algorithm fails for some noise-free degenerated cases, whereas the minimal 6-point algorithm seems to be competitive even with realistic noise.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Jentsch,
  author    = {Jentsch, Mark F.},
  title     = {Entwicklung eines Sommerreferenzjahres zur Bestimmung der sommerlichen {\"U}berhitzung von Geb{\"a}uden},
  series = {Bauphysiktage Kaiserslautern 2015, Kaiserslautern, 21-22 Oktober 2015},
  booktitle = {Bauphysiktage Kaiserslautern 2015, Kaiserslautern, 21-22 Oktober 2015},
  editor    = {Kornadt, Oliver},
  publisher = {Eigenverlag der Technischen Universit{\"a}t Kaiserslautern},
  address   = {Kaiserslautern},
  doi       = {10.25643/bauhaus-universitaet.3105},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170516-31058},
  pages     = {53-61},
  abstract  = {Die Ableitung von sommer-fokussierten warmen Referenzjahren aus langj{\"a}hrigen Klimadaten erfolgt in Europa bisher nach unterschiedlichen, l{\"a}nderspezifischen Methoden, die sich in der Regel allein auf die Trockentemperatur beziehen und in der Auswahl eines zusammenh{\"a}ngenden realen Sommerhalbjahres resultieren. Simulationsergebnisse zur sommerlichen {\"U}berhitzung von nat{\"u}rlich bel{\"u}fteten Geb{\"a}uden in Deutschland und Großbritannien zeigen jedoch f{\"u}r einige Wetterstationen weniger {\"U}berhitzung f{\"u}r Simulationen mit dem sommer-fokussierten Referenzjahr als f{\"u}r solche mit dem entsprechenden Testreferenzjahr (TRY) f{\"u}r den gleichen Ort. Dies gilt insbesondere dann, wenn einzelne Monate miteinander verglichen werden. Neben der Wahl eines kompletten Halbjahres, das sowohl extrem warme als auch vergleichsweise k{\"u}hle Monate beinhalten kann, liegt dies vor allem begr{\"u}ndet in der fehlenden Ber{\"u}cksichtigung der Solarstrahlung bei der Auswahl eines warmen Referenzjahres, die jedoch eine wichtige Rolle f{\"u}r sommerliche {\"U}berhitzungserscheinungen in Geb{\"a}uden spielt. Eine verl{\"a}ssliche, allgemein anerkannte Methode zur Erstellung von sommer-fokussierten Referenzjahren erscheint daher auch im Hinblick auf die rechtlichen Rahmenbedingungen in der Europ{\"a}ischen Union, die Strategien zur nat{\"u}rlichen Bel{\"u}ftung von Neubauten und Sanierungen beg{\"u}nstigen, erforderlich. Diese Arbeit pr{\"a}sentiert einen Ansatz zur Erstellung eines Sommerreferenzjahres (Summer Reference Year - SRY) aus dem TRY eines gegebenen Ortes und langj{\"a}hrigen Klimadaten. Die existierenden TRY-Daten werden hierbei skaliert, um den Bedingungen f{\"u}r Trockentemperatur und Solarstrahlung von nah-extremen Kandidatenjahren zu entsprechen, die separat {\"u}ber einen statistischen Ansatz ausgew{\"a}hlt werden. Anschließend werden Feuchttemperatur, Windgeschwindigkeit und Luftdruck des TRY durch lineare Korrelationen mit der Trockentemperatur angepasst, um die entsprechenden SRY-Daten zu erhalten. Der Vorteil dieser Methode liegt darin, dass das grundlegende Wettermuster des TRY erhalten bleibt und somit eine klare Relation zwischen SRY und TRY besteht, die eine Vergleichbarkeit von Simulationsergebnissen gew{\"a}hrleistet. {\"U}ber vergleichende Geb{\"a}udesimulationen mit dem zugrundeliegenden TRY und langj{\"a}hrigen Klimadatens{\"a}tzen kann nachgewiesen werden, dass sich das SRY zur Ermittlung sommerlicher {\"U}berhitzungserscheinungen in nat{\"u}rlich bel{\"u}fteten Geb{\"a}uden eignet. Weiterhin kann gezeigt werden, dass das SRY im Gegensatz zur direkten Nutzung eines Kandidatenjahres f{\"u}r einen nah-extremen Sommer die M{\"o}glichkeit eines monatsscharfen Vergleichs mit dem TRY erlaubt und frei von wenig repr{\"a}sentativen Besonderheiten ist, die in den entsprechenden Kandidatenjahren vorhanden sein k{\"o}nnen.},
  subject      = {Bauphysik},
  language  = {de}
}
@inproceedings{GruendelLudwigGeisenhansluekeetal.,
  author    = {Gr{\"u}ndel, Hendrik and Ludwig, Horst-Michael and Geisenhansl{\"u}ke, Carsten and M{\"u}ller, Matthias},
  title     = {Einfluss der Zusammensetzung von Portlandzementklinker und Sulfattr{\"a}ger auf das Erstarrungsverhalten von Spritzbeton},
  series = {Tagungsband 19. Ibausil - 19. Internationale Baustofftagung : 16.-18. September 2015, Weimar},
  booktitle = {Tagungsband 19. Ibausil - 19. Internationale Baustofftagung : 16.-18. September 2015, Weimar},
  isbn      = {978-3-00-050225-5 (Bauhaus-Universit{\"a}tsverlag Weimar)},
  doi       = {10.25643/bauhaus-universitaet.4885},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240507-48851},
  pages     = {549-555},
  abstract  = {In der vorliegenden Studie wurde der Einfluss der Klinkerzusammensetzung sowie der Sulfattr{\"a}gerart auf die Leistungsf{\"a}higkeit eines Spritzzementes untersucht. Um eine Untersulfatisierung im System mit einen Aluminiumsulfat / -hydroxid Beschleuniger zu vermeiden, sollte ein anhydritbasierter Sulfattr{\"a}ger eingesetzt werden. Dies f{\"u}hrt zu einer besseren Festigkeitsentwicklung im jungen Alter.},
  subject      = {Beton},
  language  = {de}
}
@inproceedings{FerreiraVieira,
  author    = {Ferreira, Milton dos Santos and Vieira, Nelson},
  title     = {EIGENFUNCTIONS AND FUNDAMENTAL SOLUTIONS FOR THE FRACTIONAL LAPLACIAN IN 3 DIMENSIONS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2796},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27968},
  pages     = {6},
  abstract  = {Recently there has been a surge of interest in PDEs involving fractional derivatives in different fields of engineering. In this extended abstract we present some of the results developedin [3]. We compute the fundamental solution for the three-parameter fractional Laplace operator Δ by transforming the eigenfunction equation into an integral equation and applying the method of separation of variables. The obtained solutions are expressed in terms of Mittag-Leffer functions. For more details we refer the interested reader to [3] where it is also presented an operational approach based on the two Laplace transform.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{BudarapuNarayanaRammohanetal.,
  author    = {Budarapu, Pattabhi Ramaiah and Narayana, T.S.S. and Rammohan, B. and Rabczuk, Timon},
  title     = {Directionality of sound radiation from rectangular panels},
  series = {Applied Acoustics},
  journal   = {Applied Acoustics},
  pages     = {128 -- 140},
  abstract  = {Directionality of sound radiation from rectangular panels},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Chen,
  author    = {Chen, Pu},
  title     = {Die Reise der Zeichen - Eine Studie zur symbolischen Bildwelt der Xiy{\"u}-Kultur an der Seidenstraße},
  doi       = {10.25643/bauhaus-universitaet.2355},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150225-23553},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {281},
  abstract  = {The present study focuses on the traditional visual Xiyu-Signs of various ethnic groups with the example of Xinjiang in northwest China, along the ancient path of the Silk Road. The research should be understood as an experiment to a systematic presentation of the symbolic visual world in Xinjiang and therefore in a broader sense as an experiment to preserve the endangered Xiyu-Cultural Heritage. Due to the profound change in China and the Go-West-Strategy of China's economic programme an efficient way must be found to bring modernization and tradition in harmony. This study describes, analyses and evaluates exemplarily, how signs and symbols of knowledge and culture have been mixed between eastern and western cultures along the Silk Road in Xinjiang. It displays how they have been transferred and how far the Xiyu-Culture reflects, that Xinjiang was a meeting point of eastern and western cultures. In the process of my research three main questions arose: Firstly, what can the experience model of the ancient Silk Road contribute to the understanding of cultural development in today's information age? Secondly, what does cultural diversity mean for communication in Xinjiang? Is there an increase of media technology in the field of visual communication because of international influences? Thirdly, how can Xinjiang benefit from the opportunities given by the Go-West-Strategy of China's economic programme in an increasingly globalized world and find a balance between culture and economic prosperity? Therefore, this study uses a method that integrates a cultural-anthropological perspective. Characteristics of the traditional visual Xiyu-Signs, their significance for the ethnic groups in Xinjiang and cultural exchanges between Europe and Asia are discussed based on a field work, and the particular influence of trade and transport routes is presented. The visual signs of the Xiyu-Culture are shown from the time before the Islamization to today's Islamic period. The research shows that the signs are not place-bound cultural phenomena or local tradition; they are rather influenced by regional, national and international cultures consciously or unconsciously. They are a result of cultural communication. Finally the signs of Xiyu-Culture of Xinjiang are thoroughly researched with the Go-West-Strategy of the Chinese government. Economic development brings to Xinjiang not only modernization and prosperity, but also a cultural and ecological imbalance. Mankind formed everything into structure, what he perceives around him, with signs. The Xiyu-Signs create a visual structure. The Xiyu-Culture still has influence on the lifestyle of the ethnic groups in Xinjiang. Today, the confrontation between the traditional Xiyu-Culture and economic development has led to a serious conflict in Xinjiang. This study is a critical interpretation of the current situation of Xiyu-Culture and the Chinese economic program in Xinjiang. It also contributes to the analysis of the hitherto insufficiently recognized interactions between history, culture, politics and economics of cultural globalization in Xinjiang.},
  subject      = {Seidenstraße},
  language  = {de}
}
@phdthesis{Rohde,
  author    = {Rohde, Theres},
  title     = {Die Bau-Ausstellung zu Beginn des 20. Jahrhunderts oder "Die Schwierigkeit zu wohnen"},
  doi       = {10.25643/bauhaus-universitaet.2442},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150811-24425},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {530},
  abstract  = {Die Bau-Ausstellung zu Beginn des 20. Jahrhunderts oder „Die Schwierigkeit zu wohnen", so lautet der Titel der Arbeit und legt damit ihren Fokus offen. Sie betrachtet ein um 1900 aufkommendes Ausstellungsph{\"a}nomen in seinen ersten Dekaden; in einer Zeit, in der das Wohnen problematisiert wurde. Der Praxis des Wohnens ist Anfang des 20. Jahrhunderts seine Selbstverst{\"a}ndlichkeit abgesprochen worden. Die Bau-Ausstellung wird als ein Symptom dieses Verlusts interpretiert und zugleich als Versuch, ihm entgegenzuwirken. Statt sie innerdisziplin{\"a}r als eine architekturgeschichtliche Episode der Moderne rein positivistisch zu beschreiben, legt die vorliegende Arbeit im Typus der Bau-Ausstellung eine weit reichende Problematik frei, die kulturphilosophische ebenso wie medientheoretische Dimensionen hat: Inwieweit l{\"a}sst sich das Wohnen {\"u}berhaupt ausstellen? Wie kann man eine allt{\"a}gliche Praxis, die kaum eine Definition erlaubt, zeigen? Den Umgang mit dieser Aporie untersucht die Arbeit.},
  subject      = {Architektur},
  language  = {de}
}
@article{NanthakumarLahmerZhuangetal.,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Zhuang, Xiaoying and Zi, Goangseup and Rabczuk, Timon},
  title     = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  series = {Inverse Problems in Science and Engineering},
  journal   = {Inverse Problems in Science and Engineering},
  abstract  = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{JahrSchlichDragosetal.,
  author    = {Jahr, Katrin and Schlich, Robert and Dragos, Kosmas and Smarsly, Kay},
  title     = {DECENTRALIZED AUTONOMOUS FAULT DETECTION IN WIRELESS STRUCTURAL HEALTH MONITORING SYSTEMS USING STRUCTURAL RESPONSE DATA},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2803},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28031},
  pages     = {8},
  abstract  = {Sensor faults can affect the dependability and the accuracy of structural health monitoring (SHM) systems. Recent studies demonstrate that artificial neural networks can be used to detect sensor faults. In this paper, decentralized artificial neural networks (ANNs) are applied for autonomous sensor fault detection. On each sensor node of a wireless SHM system, an ANN is implemented to measure and to process structural response data. Structural response data is predicted by each sensor node based on correlations between adjacent sensor nodes and on redundancies inherent in the SHM system. Evaluating the deviations (or residuals) between measured and predicted data, sensor faults are autonomously detected by the wireless sensor nodes in a fully decentralized manner. A prototype SHM system implemented in this study, which is capable of decentralized autonomous sensor fault detection, is validated in laboratory experiments through simulated sensor faults. Several topologies and modes of operation of the embedded ANNs are investigated with respect to the dependability and the accuracy of the fault detection approach. In conclusion, the prototype SHM system is able to accurately detect sensor faults, demonstrating that neural networks, processing decentralized structural response data, facilitate autonomous fault detection, thus increasing the dependability and the accuracy of structural health monitoring systems.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{MuellerLudwigSchulteSchreppingetal.,
  author    = {Mueller, Matthias and Ludwig, Horst-Michael and Schulte-Schrepping, Christoph and Breitenb{\"u}cher, Rolf},
  title     = {Dauerhafte Betonfahrbahndecken durch Verwendung unterschiedlicher Bindemittel in Ober- und Unterbeton},
  series = {Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2},
  booktitle = {Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2},
  editor    = {Ludwig, Horst-Michael},
  organization    = {F.A.Finger-Institut f{\"u}r Baustoffkunde, Bauhaus-Universit{\"a}t Weimar},
  isbn      = {978-3-00-050225-5 (Bauhaus-Universit{\"a}tsverlag Weimar)},
  doi       = {10.25643/bauhaus-universitaet.4871},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240507-48711},
  pages     = {2536-2543},
  abstract  = {Gem{\"a}ß dem Regelwerk f{\"u}r Betonstraßen muss f{\"u}r zweischichtige Betonfahrbahndecken derselbe Zement in Ober- und Unterbeton verwendet werden. Weiterhin ist die Anrechnung von Flugasche auf den w/z-Wert nicht gestattet. Durch eine flexiblere Handhabung der Bindemittel k{\"o}nnten sich Vorteile f{\"u}r die Betonbauweise ergeben. So k{\"o}nnte z.B. der st{\"a}rker durch Frost beanspruchte Oberbeton mit CEM I hergestellt werden, w{\"a}hrend Zemente mit h{\"o}heren H{\"u}ttensandgehalten nur im Unterbeton angewendet werden. Im Unterbeton k{\"o}nnten dann Gesteinsk{\"o}rnungen eingesetzt werden, die in einer herk{\"o}mmlichen CEM I-Rezeptur als AKR-kritisch eingestuft w{\"u}rden. Anhand von AKR-Performance-Pr{\"u}fungen konnte die hohe Wirksamkeit h{\"u}ttensandhaltiger Zemente sowie auch von Flugasche auf die AKR-Verminderung aufgezeigt werden. Schon mit einem CEM II/B-S wurden AKR-kritische Rezepturen in den unkritischen Bereich verschoben. Der Frost-Tausalz-Widerstand der Betone wurde bei hohen Gehalten an H{\"u}ttensand bzw. H{\"u}ttensand + Flugasche verringert, bewegte sich aber in jedem Fall noch im g{\"u}nstigen Bereich. Um eine Beeintr{\"a}chtigung der baupraktischen Umsetzbarkeit zu vermeiden, sollte sich die Festigkeitsentwicklung von Ober- und Unterbeton im jungen Alter nicht zu stark unterscheiden. Modellberechnungen zur Festlegung einer Mindestfestigkeit f{\"u}r die fr{\"u}he Belastung sind derzeit noch in Bearbeitung.},
  subject      = {Beton},
  language  = {de}
}
@phdthesis{Kloke,
  author    = {Kloke, Christina Anna},
  title     = {Das Manifest als Medium der Rezeptionssteuerung im Architektur- und Designdiskurs},
  doi       = {10.25643/bauhaus-universitaet.2428},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150702-24284},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {225},
  abstract  = {In der vorliegenden Arbeit werden Manifest{\"a}ußerungen des Design- und Architekturdiskurses im situativen, medialen, institutionellen und historischen Kontext untersucht. Auf Grundlage einer Analyse der Etymologie und der Ideengeschichte des Manifestes wird anhand ausgew{\"a}hlter Beispiele die These belegt, dass das Medium vor allem der gezielten Rezeptionssteuerung im Diskurs dient. Dar{\"u}ber hinaus wird die F{\"a}higkeit und Bedeutung des Manifestes als Spiegel vergangener und gegenw{\"a}rtiger, aber auch als Wegbereiter zuk{\"u}nftiger Diskurse analysiert und Entwicklungen des Manifestes hinsichtlich Stilistik, Inhalt, Funktion und Bedeutung im Design- und Architekturdiskurs dargestellt.},
  subject      = {Manifest},
  language  = {de}
}
@phdthesis{Kloke,
  author    = {Kloke, Christina Anna},
  title     = {Das Manifest als Medium der Rezeptionssteuerung im Architektur- und Designdiskurs},
  doi       = {10.25643/bauhaus-universitaet.2415},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150623-24151},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {225},
  abstract  = {In der vorliegenden Arbeit werden Manifest{\"a}ußerungen des Design- und Architekturdiskurses im situativen, medialen, institutionellen und historischen Kontext untersucht. Auf Grundlage einer Analyse der Etymologie und der Ideengeschichte des Manifestes wird anhand ausgew{\"a}hlter Beispiele die These belegt, dass das Medium vor allem der gezielten Rezeptionssteuerung im Diskurs dient. Dar{\"u}ber hinaus wird die F{\"a}higkeit und Bedeutung des Manifestes als Spiegel vergangener und gegenw{\"a}rtiger, aber auch als Wegbereiter zuk{\"u}nftiger Diskurse analysiert und Entwicklungen des Manifestes hinsichtlich Stilistik, Inhalt, Funktion und Bedeutung im Design- und Architekturdiskurs dargestellt.},
  subject      = {Manifest},
  language  = {de}
}
@inproceedings{Koenig,
  author    = {K{\"o}nig, Reinhard},
  title     = {CPlan: An Open Source Library for Computational Analysis and Synthesis},
  series = {33rd eCAADe Conference},
  booktitle = {33rd eCAADe Conference},
  editor    = {Martens, Bob and Wurzer, G, Gabriel and Grasl, Tomas and Lorenz, Wolfgang and Schaffranek, Richard},
  publisher = {Vienna University of Technology},
  address   = {Vienna},
  doi       = {10.25643/bauhaus-universitaet.2503},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25037},
  pages     = {245 -- 250},
  abstract  = {Some caad packages offer additional support for the optimization of spatial configurations, but the possibilities for applying optimization are usually limited either by the complexity of the data model or by the constraints of the underlying caad system. Since we missed a system that allows to experiment with optimization techniques for the synthesis of spatial configurations, we developed a collection of methods over the past years. This collection is now combined in the presented open source library for computational planning synthesis, called CPlan. The aim of the library is to provide an easy to use programming framework with a flat learning curve for people with basic programming knowledge. It offers an extensible structure that allows to add new customized parts for various purposes. In this paper the existing functionality of the CPlan library is described.},
  subject      = {Architektur},
  language  = {en}
}
@article{AreiasRabczukQueirosdeMeloetal.,
  author    = {Areias, Pedro and Rabczuk, Timon and Queiros de Melo, F. J. M. and Cesar de Sa, J.M.},
  title     = {Coulomb frictional contact by explicit projection in the cone for _nite displacement quasi-static problems},
  series = {Computational Mechanics},
  journal   = {Computational Mechanics},
  pages     = {57 -- 72},
  abstract  = {Coulomb frictional contact by explicit projection in the cone for _nite displacement quasi-static problems},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoLuZhangetal.,
  author    = {Zhao, Jun-Hua and Lu, Lixin and Zhang, Zhiliang and Guo, Wanlin and Rabczuk, Timon},
  title     = {Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {432 -- 438},
  abstract  = {Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{TalebiSilaniRabczuk,
  author    = {Talebi, Hossein and Silani, Mohammad and Rabczuk, Timon},
  title     = {Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation},
  series = {Advances in Engineering Software},
  journal   = {Advances in Engineering Software},
  pages     = {82 -- 92},
  abstract  = {Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Sucker,
  author    = {Sucker, Katharina},
  title     = {Communities in discourse and space. Towards a spatial dialectic in gated residential developments},
  doi       = {10.25643/bauhaus-universitaet.2346},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150206-23466},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {243},
  abstract  = {This research projects deals with the discoursivity of spatial production. By looking at contemporary residential development in the city of Istanbul, I will examine the reciprocity of the material production of space on one hand, and social discourses on the other, in order to make a contribution to how physical space can be used as a source of research in urban studies. In real estate marketing social discourses are used as a source of reference for place branding or identity design. Branding concepts therefore relate to how social groups imagine their position or future position in society, imaginaries that are continuously influenced and changed by social dynamics within the city but also from the outside. How such urban identities are formed and it what way they relate to the urban environment is crucial to a wide spectrum of social and cultural science. The constitutive role urban space attains has been described and analysed in much detail. Such scrutiny however has yet to be applied to the visual and communicative forms of engagement, the build environment partakes in the formation and change of social discourses.},
  subject      = {Architektur},
  language  = {en}
}
@article{Bargstaedt,
  author    = {Bargst{\"a}dt, Hans-Joachim},
  title     = {Challenges of BIM for Construction Site Operations},
  series = {Procedia Engineering},
  journal   = {Procedia Engineering},
  doi       = {10.1016/j.proeng.2015.08.123},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170413-31218},
  pages     = {52 -- 59},
  abstract  = {Building Information Modeling is a powerful tool for the design and for a consistent set of data in a virtual storage. For the application in the phases of realization and on site it needs further development. The paper describes main challenges and main features, which will help the development of software to better service the needs of construction site managers},
  subject      = {Building Information Modeling},
  language  = {en}
}
@inproceedings{AlaladeKafleWuttkeetal.,
  author    = {Alalade, Muyiwa and Kafle, Binod and Wuttke, Frank and Lahmer, Tom},
  title     = {CALIBRATION OF CYCLIC CONSTITUTIVE MODELS FOR SOILS BY OSCILLATING FUNCTIONS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2793},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27932},
  pages     = {6},
  abstract  = {In order to minimize the probability of foundation failure resulting from cyclic action on structures, researchers have developed various constitutive models to simulate the foundation response and soil interaction as a result of these complex cyclic loads. The efficiency and effectiveness of these model is majorly influenced by the cyclic constitutive parameters. Although a lot of research is being carried out on these relatively new models, little or no details exist in literature about the model based identification of the cyclic constitutive parameters. This could be attributed to the difficulties and complexities of the inverse modeling of such complex phenomena. A variety of optimization strategies are available for the solution of the sum of least-squares problems as usually done in the field of model calibration. However for the back analysis (calibration) of the soil response to oscillatory load functions, this paper gives insight into the model calibration challenges and also puts forward a method for the inverse modeling of cyclic loaded foundation response such that high quality solutions are obtained with minimum computational effort. Therefore model responses are produced which adequately describes what would otherwise be experienced in the laboratory or field.},
  subject      = {Angewandte Informatik},
  language  = {en}
}