@article{ZhaoLuZhangetal.,
  author    = {Zhao, Jun-Hua and Lu, Lixin and Zhang, Zhiliang and Guo, Wanlin and Rabczuk, Timon},
  title     = {Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {432 -- 438},
  abstract  = {Continuum modeling of the cohesive energy for the interfaces between _lms, spheres, coats and substrates},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoJiaWeietal.,
  author    = {Zhao, Jun-Hua and Jia, Yue and Wei, Ning and Rabczuk, Timon},
  title     = {Binding energy and mechanical stability of two parallel and crossing carbon nanotubes},
  series = {Journal of Applied Mechanics},
  journal   = {Journal of Applied Mechanics},
  abstract  = {Binding energy and mechanical stability of two parallel and crossing carbon nanotubes},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{ZhaoLuRabczuk,
  author    = {Zhao, Jiyun and Lu, Lixin and Rabczuk, Timon},
  title     = {The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {567 -- 572},
  abstract  = {The tensile and shear failure behavior dependence on chain length and temperature in amorphous polymers},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{YangBudarapuMahapatraetal.,
  author    = {Yang, Shih-Wei and Budarapu, Pattabhi Ramaiah and Mahapatra, D.R. and Bordas, St{\´e}phane Pierre Alain and Zi, Goangseup and Rabczuk, Timon},
  title     = {A Meshless Adaptive Multiscale Method for Fracture},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {382 -- 395},
  abstract  = {A Meshless Adaptive Multiscale Method for Fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{WiggenbrockSmarsly,
  author    = {Wiggenbrock, Jens and Smarsly, Kay},
  title     = {A GENERIC FRAMEWORK SUPPORTING DISTRIBUTED COMPUTING IN ENGINEERING APPLICATIONS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2826},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28260},
  pages     = {9},
  abstract  = {Modern distributed engineering applications are based on complex systems consisting of various subsystems that are connected through the Internet. Communication and collaboration within an entire system requires reliable and efficient data exchange between the subsystems. Middleware developed within the web evolution during the past years provides reliable and efficient data exchange for web applications, which can be adopted for solving the data exchange problems in distributed engineering applications. This paper presents a generic approach for reliable and efficient data exchange between engineering devices using existing middleware known from web applications. Different existing middleware is examined with respect to the suitability in engineering applications. In this paper, a suitable middleware is shown and a prototype implementation simulating distributed wind farm control is presented and validated using several performance measurements.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{WangArash,
  author    = {Wang, Quan and Arash, Behrouz},
  title     = {Announcement of a virtual special issue on computational carbon nanoscience},
  series = {Carbon},
  journal   = {Carbon},
  doi       = {10.1016/j.carbon.2015.05.082},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170428-31695},
  pages     = {370 -- 372},
  abstract  = {The Carbon journal is pleased to introduce a themed collection of recent articles in the area of computational carbon nanoscience. This virtual special issue was assembled from previously published Carbon articles by Guest Editors Quan Wang and Behrouz Arash, and can be accessed as a set in the special issue section of the journal website homepage: www.journals.elsevier.com/carbon. The article below by our guest editors serves as an introduction to this virtual special issue, and also a commentary on the growing role of computation as a tool to understand the synthesis and properties of carbon nanoforms and their behavior in composite materials.},
  subject      = {Kohlenstoff},
  language  = {en}
}
@article{VuBacSilaniLahmeretal.,
  author    = {Vu-Bac, N. and Silani, Mohammad and Lahmer, Tom and Zhuang, Xiaoying and Rabczuk, Timon},
  title     = {A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs)},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {520 -- 535},
  abstract  = {A unified framework for stochastic predictions of Young's modulus of clay/epoxy nanocomposites (PCNs)},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{VuBacRafieeZhuangetal.,
  author    = {Vu-Bac, N. and Rafiee, Roham and Zhuang, Xiaoying and Lahmer, Tom and Rabczuk, Timon},
  title     = {Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters},
  series = {Composites Part B: Engineering},
  journal   = {Composites Part B: Engineering},
  pages     = {446 -- 464},
  abstract  = {Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Vu,
  author    = {Vu, Bac Nam},
  title     = {Stochastic uncertainty quantification for multiscale modeling of polymeric nanocomposites},
  doi       = {10.25643/bauhaus-universitaet.2555},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160322-25551},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {265},
  abstract  = {Nanostructured materials are extensively applied in many fields of material science for new industrial applications, particularly in the automotive, aerospace industry due to their exceptional physical and mechanical properties. Experimental testing of nanomaterials is expensive, timeconsuming,challenging and sometimes unfeasible. Therefore,computational simulations have been employed as alternative method to predict macroscopic material properties. The behavior of polymeric nanocomposites (PNCs) are highly complex. The origins of macroscopic material properties reside in the properties and interactions taking place on finer scales. It is therefore essential to use multiscale modeling strategy to properly account for all large length and time scales associated with these material systems, which across many orders of magnitude. Numerous multiscale models of PNCs have been established, however, most of them connect only two scales. There are a few multiscale models for PNCs bridging four length scales (nano-, micro-, meso- and macro-scales). In addition, nanomaterials are stochastic in nature and the prediction of macroscopic mechanical properties are influenced by many factors such as fine-scale features. The predicted mechanical properties obtained by traditional approaches significantly deviate from the measured values in experiments due to neglecting uncertainty of material features. This discrepancy is indicated that the effective macroscopic properties of materials are highly sensitive to various sources of uncertainty, such as loading and boundary conditions and material characteristics, etc., while very few stochastic multiscale models for PNCs have been developed. Therefore, it is essential to construct PNC models within the framework of stochastic modeling and quantify the stochastic effect of the input parameters on the macroscopic mechanical properties of those materials. This study aims to develop computational models at four length scales (nano-, micro-, meso- and macro-scales) and hierarchical upscaling approaches bridging length scales from nano- to macro-scales. A framework for uncertainty quantification (UQ) applied to predict the mechanical properties of the PNCs in dependence of material features at different scales is studied. Sensitivity and uncertainty analysis are of great helps in quantifying the effect of input parameters, considering both main and interaction effects, on the mechanical properties of the PNCs. To achieve this major goal, the following tasks are carried out: At nano-scale, molecular dynamics (MD) were used to investigate deformation mechanism of glassy amorphous polyethylene (PE) in dependence of temperature and strain rate. Steered molecular dynamics (SMD)were also employed to investigate interfacial characteristic of the PNCs. At mico-scale, we developed an atomistic-based continuum model represented by a representative volume element (RVE) in which the SWNT's properties and the SWNT/polymer interphase are modeled at nano-scale, the surrounding polymer matrix is modeled by solid elements. Then, a two-parameter model was employed at meso-scale. A hierarchical multiscale approach has been developed to obtain the structure-property relations at one length scale and transfer the effect to the higher length scales. In particular, we homogenized the RVE into an equivalent fiber. The equivalent fiber was then employed in a micromechanical analysis (i.e. Mori-Tanaka model) to predict the effective macroscopic properties of the PNC. Furthermore, an averaging homogenization process was also used to obtain the effective stiffness of the PCN at meso-scale. Stochastic modeling and uncertainty quantification consist of the following ingredients: - Simple random sampling, Latin hypercube sampling, Sobol' quasirandom sequences, Iman and Conover's method (inducing correlation in Latin hypercube sampling) are employed to generate independent and dependent sample data, respectively. - Surrogate models, such as polynomial regression, moving least squares (MLS), hybrid method combining polynomial regression and MLS, Kriging regression, and penalized spline regression, are employed as an approximation of a mechanical model. The advantage of the surrogate models is the high computational efficiency and robust as they can be constructed from a limited amount of available data. - Global sensitivity analysis (SA) methods, such as variance-based methods for models with independent and dependent input parameters, Fourier-based techniques for performing variance-based methods and partial derivatives, elementary effects in the context of local SA, are used to quantify the effects of input parameters and their interactions on the mechanical properties of the PNCs. A bootstrap technique is used to assess the robustness of the global SA methods with respect to their performance. In addition, the probability distribution of mechanical properties are determined by using the probability plot method. The upper and lower bounds of the predicted Young's modulus according to 95 \% prediction intervals were provided. The above-mentioned methods study on the behaviour of intact materials. Novel numerical methods such as a node-based smoothed extended finite element method (NS-XFEM) and an edge-based smoothed phantom node method (ES-Phantom node) were developed for fracture problems. These methods can be used to account for crack at macro-scale for future works. The predicted mechanical properties were validated and verified. They show good agreement with previous experimental and simulations results.},
  subject      = {Polymere},
  language  = {en}
}
@inproceedings{VolkovKirschkeChelyshkovetal.,
  author    = {Volkov, Andrey and Kirschke, Heiko and Chelyshkov, Pavel and Sedov, Artem and Lysenko, Denis},
  title     = {THE CRITERIA'S SET WITH INVARIANT DESIGN BUILDING ELEMENTS ON THE BASE OF THREE IMPUTATIONS: "CONVENIENCE", "SAFETY" AND "ENERGY-EFFICIENCY"},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2795},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-27956},
  pages     = {6},
  abstract  = {The paper deals with the formalization of the criteria for constructing building management systems. We consider three criteria - "convenience", "safety" and "energyefficiency". For each objective proposed method of calculation.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Vieira,
  author    = {Vieira, Nelson},
  title     = {SOME RESULTS IN FRACTIONAL CLIFFORD ANALYSIS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2825},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28256},
  pages     = {6},
  abstract  = {What is nowadays called (classic) Clifford analysis consists in the establishment of a function theory for functions belonging to the kernel of the Dirac operator. While such functions can very well describe problems of a particle with internal SU(2)-symmetries, higher order symmetries are beyond this theory. Although many modifications (such as Yang-Mills theory) were suggested over the years they could not address the principal problem, the need of a n-fold factorization of the d'Alembert operator. In this paper we present the basic tools of a fractional function theory in higher dimensions, for the transport operator (alpha = 1/2 ), by means of a fractional correspondence to the Weyl relations via fractional Riemann-Liouville derivatives. A Fischer decomposition, fractional Euler and Gamma operators, monogenic projection, and basic fractional homogeneous powers are constructed.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Vasileva,
  author    = {Vasileva, Iuliia},
  title     = {THE PROBLEM OF PARTIAL REINFORCING AN INTERFACE CRACK EDGE BY A RIGID PATCH PLATE UNDER IN-PLANE AND ANTIPLANE LOADS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2824},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28242},
  pages     = {5},
  abstract  = {The stress state of a piecewise-homogeneous elastic body, which has a semi-infinite crack along the interface, under in-plane and antiplane loads is considered. One of the crack edges is reinforced by a rigid patch plate on a finite interval adjacent to the crack tip. The crack edges are loaded with specified stresses. The body is stretched at infinity by specified stresses. External forces with a given principal vector and moment act on the patch plate. The problem reduces to a Riemann-Hilbert boundary-value matrix problem with a piecewise-constant coefficient for two complex potentials in the plane case and for one in the antiplane case. The complex potentials are found explicitly using a Gaussian hypergeometric function. The stress state of the body close to the ends of the patch plate, one of which is also simultaneously the crack tip, is investigated. Stress intensity factors near the singular points are determined.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{TreyerKleinKoenigetal.,
  author    = {Treyer, Lukas and Klein, Bernhard and K{\"o}nig, Reinhard and Meixner, Christine},
  title     = {Lightweight urban computation interchange (LUCI) system},
  series = {Proceedings},
  booktitle = {Proceedings},
  publisher = {FOSS4G},
  address   = {Seoul, South Korea},
  doi       = {10.25643/bauhaus-universitaet.2598},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160622-25982},
  pages     = {12},
  abstract  = {In this paper we introduce LUCI, a Lightweight Urban Calculation Interchange system, designed to bring the advantages of a calculation and content co-ordination system to small planning and design groups by the means of an open source middle-ware. The middle-ware focuses on problems typical to urban planning and therefore features a geo-data repository as well as a job runtime administration, to coordinate simulation models and its multiple views. The described system architecture is accompanied by two exemplary use cases that have been used to test and further develop our concepts and implementations.},
  language  = {en}
}
@inproceedings{TreyerKleinKoenigetal.,
  author    = {Treyer, Lukas and Klein, Bernhard and K{\"o}nig, Reinhard and Meixner, Christine},
  title     = {Lightweight urban computation interchange (LUCI) system},
  series = {FOSS4G 2015 Conference},
  booktitle = {FOSS4G 2015 Conference},
  publisher = {FOSS4G},
  address   = {Seoul, South Korea},
  doi       = {10.25643/bauhaus-universitaet.2504},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160118-25042},
  pages     = {12},
  abstract  = {In this paper we introduce LUCI, a Lightweight Urban Calculation Interchange system, designed to bring the advantages of a calculation and content co-ordination system to small planning and design groups by the means of an open source middle-ware. The middle-ware focuses on problems typical to urban planning and therefore features a geo-data repository as well as a job runtime administration, to coordinate simulation models and its multiple views. The described system architecture is accompanied by two exemplary use cases that have been used to test and further develop our concepts and implementations.},
  subject      = {Architektur},
  language  = {en}
}
@article{ThaiNguyenXuanBordasetal.,
  author    = {Thai, Chien H. and Nguyen-Xuan, Hung and Bordas, St{\´e}phane Pierre Alain and Nguyen-Thanh, Nhon and Rabczuk, Timon},
  title     = {Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory},
  series = {Mechanics of Advanced Materials and Structures},
  journal   = {Mechanics of Advanced Materials and Structures},
  pages     = {451 -- 469},
  abstract  = {Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{TanLahmerSiddappa,
  author    = {Tan, Fengjie and Lahmer, Tom and Siddappa, Manju Gyaraganahalll},
  title     = {SECTION OPTIMIZATION AND RELIABILITY ANALYSIS OF ARCH-TYPE DAMS INCLUDING COUPLED MECHANICAL-THERMAL AND HYDRAULIC FIELDS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2821},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28212},
  pages     = {8},
  abstract  = {From the design experiences of arch dams in the past, it has significant practical value to carry out the shape optimization of arch dams, which can fully make use of material characteristics and reduce the cost of constructions. Suitable variables need to be chosen to formulate the objective function, e.g. to minimize the total volume of the arch dam. Additionally a series of constraints are derived and a reasonable and convenient penalty function has been formed, which can easily enforce the characteristics of constraints and optimal design. For the optimization method, a Genetic Algorithm is adopted to perform a global search. Simultaneously, ANSYS is used to do the mechanical analysis under the coupling of thermal and hydraulic loads. One of the constraints of the newly designed dam is to fulfill requirements on the structural safety. Therefore, a reliability analysis is applied to offer a good decision supporting for matters concerning predictions of both safety and service life of the arch dam. By this, the key factors which would influence the stability and safety of arch dam significantly can be acquired, and supply a good way to take preventive measures to prolong ate the service life of an arch dam and enhances the safety of structure.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{TalebiSilaniRabczuk,
  author    = {Talebi, Hossein and Silani, Mohammad and Rabczuk, Timon},
  title     = {Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation},
  series = {Advances in Engineering Software},
  journal   = {Advances in Engineering Software},
  pages     = {82 -- 92},
  abstract  = {Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Sucker,
  author    = {Sucker, Katharina},
  title     = {Communities in discourse and space. Towards a spatial dialectic in gated residential developments},
  doi       = {10.25643/bauhaus-universitaet.2346},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150206-23466},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {243},
  abstract  = {This research projects deals with the discoursivity of spatial production. By looking at contemporary residential development in the city of Istanbul, I will examine the reciprocity of the material production of space on one hand, and social discourses on the other, in order to make a contribution to how physical space can be used as a source of research in urban studies. In real estate marketing social discourses are used as a source of reference for place branding or identity design. Branding concepts therefore relate to how social groups imagine their position or future position in society, imaginaries that are continuously influenced and changed by social dynamics within the city but also from the outside. How such urban identities are formed and it what way they relate to the urban environment is crucial to a wide spectrum of social and cultural science. The constitutive role urban space attains has been described and analysed in much detail. Such scrutiny however has yet to be applied to the visual and communicative forms of engagement, the build environment partakes in the formation and change of social discourses.},
  subject      = {Architektur},
  language  = {en}
}
@inproceedings{StokmaierClassSchulenbergetal.,
  author    = {Stokmaier, Markus and Class, A.G. and Schulenberg, T. and Lahey Jr., R.T},
  title     = {OPTIMISING ACOUSTIC RESONATORS FOR SONOFUSION EXPERIMENTS WITH EVOLUTIONARY ALGORITHMS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2820},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28202},
  pages     = {8},
  abstract  = {The sizing of simple resonators like guitar strings or laser mirrors is directly connected to the wavelength and represents no complex optimisation problem. This is not the case with liquid-filled acoustic resonators of non-trivial geometries, where several masses and stiffnesses of the structure and the fluid have to fit together. This creates a scenario of many competing and interacting resonances varying in relative strength and frequency when design parameters change. Hence, the resonator design involves a parameter-tuning problem with many local optima. As its solution evolutionary algorithms (EA) coupled to a forced-harmonic FE simulation are presented. A new hybrid EA is proposed and compared to two state-of-theart EAs based on selected test problems. The motivating background is the search for better resonators suitable for sonofusion experiments where extreme states of matter are sought in collapsing cavitation bubbles.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@phdthesis{Sowoidnich,
  author    = {Sowoidnich, Thomas},
  title     = {A Study of Retarding Effects on Cement and Tricalcium Silicate Hydration induced by Superplasticizers},
  isbn      = {978-3-00-052204-8},
  doi       = {10.25643/bauhaus-universitaet.2544},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20160224-25444},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {214},
  abstract  = {Fließmittel werden in Betonen verwendet, um deren Fließeigenschaften w{\"a}hrend der Verarbeitung zu verbessern und Wasser einzusparen. Beide Faktoren beeinflussen nicht nur den Frischbeton, sondern auch signifikant die Festbetoneigenschaften. Nachteilig wirken sich Fließmittel auf die Festigkeitsentwicklung aus, die z.T. sehr stark verz{\"o}gert wird. Dies ist vor allem bei Bauteilen, die im Rahmen eines Vorfertigungsprozesses hergestellt werden, ein {\"o}konomischer Nachteil. Die vorliegende Arbeit widmet sich den Ursachen f{\"u}r die Verz{\"o}gerung der Portlandzementhydratation bei Verwendung von Fließmitteln. Um die komplexen Reaktionen, die w{\"a}hrend der Portlandzementhydratation auftreten, zu vereinfachen, betrachtet ein {\"u}berwiegender Teil der Arbeit die Wechselwirkung Fließmittel-Tricalciumsilikat (Abk. Ca3SiO5 oder C3S, Hauptbestandteil von Portlandzementklinker). Die Untersuchungen werden in drei Hauptteilen durchgef{\"u}hrt, wobei Methoden wie u.a. isotherme W{\"a}rmeflusskalorimetrie, Elektrische Leitf{\"a}higkeit, Elektronenmikroskopie, ICP-OES, TOC als auch Analytische Ultrazentrifugation Anwendung finden. Basierend auf der Wechselwirkung von Kationen mit anionischen Ladungstr{\"a}gern von Polymeren wird die Interaktion von Calcium mit Fließmitteln im ersten Teil der Arbeit untersucht. Dabei kommt es {\"u}berwiegend zur Komplexierung von Calciumionen durch die funktionellen Gruppen der Plymere (Carboxyl- bzw. Sulfonguppen), die in zement{\"a}ren Umgebungen sowohl gel{\"o}st in der w{\"a}ssrigen Phase als auch als Bestandteil von Partikelgrenzfl{\"a}chen vorhanden sind. Neben diesen Effekten kann auch gezeigt werden, dass Fließmittel die Bildung von nanoskaligen Partikeln hervorrufen, die infolge der sterischen Wirkung von Fließmitteln dispergiert in der w{\"a}ssrigen Phase vorliegen (Clusterbildung). Analog zu neuesten Erkenntnissen aus dem Bereich der Biomineralisation ist daher davon auszugehen, dass diese Nanopartikel durch Agglomeration das Kristallwachtsum beeinflussen. Ausgehend von der Annahme, dass die Aufl{\"o}sungs- und/ oder F{\"a}llungskinetik durch die Wirkung von Fließmitteln behindert und damit f{\"u}r den Verz{\"o}gerungseffekt der Fließmittel w{\"a}hrend der komplexen Hydratationsreaktion verantwortlich seien k{\"o}nnen, werden die zugrundeliegenden Vorg{\"a}nge im zweiten Abschnitt getrennt voneinander untersucht. Es wird anhand von L{\"o}sungsuntersuchungen an C-S-H Phasen und Portlandit herausgestellt, dass die Komplexierung von gel{\"o}sten Calciumionen durch funktionelle Gruppen der Polymere die L{\"o}slichkeit von Portlandit erh{\"o}ht. Im Gegensatz f{\"u}hrt die Komplexierung von Calciumionen in der w{\"a}ssrigen Phase zu einer Verringerung der Calciumionenkonzentration in der w{\"a}ssrigen Phase. Diese Effekte werden auf die unterschiedlich starke Adsorptionsneigung der Polymere an C-S-H-Phasen und Portlandit zur{\"u}ckgef{\"u}hrt. Es wird davon ausgegangen, dass die Adsorption aufgrund der gr{\"o}ßeren spezifischen Oberfl{\"a}che st{\"a}rker an den C-S-H-Phasen als am Portlandit auftritt. Demnach stellt sich dar, dass die Polymere erst nachdem die funktionellen Gruppen Calciumionen aus der w{\"a}ssrigen Phase komplexiert haben an den C-S-H-Phasen adsorbieren. Weiterhin kann gezeigt werden, dass die freie C3S Aufl{\"o}sungsrate in Anwesenheit von Fließmitteln keinen direkten Zusammenhang zur Verz{\"o}gerung erkennen l{\"a}sst. Teilweise kommt es zu einer in Bezug zur Kontrollprobe ohne Fließmittel erh{\"o}hten sowie auch verringerten Aufl{\"o}sungsrate. Wird das Komplexierungsvem{\"o}gen der Fließmittel ber{\"u}cksichtigt, so kann durchaus eine verlangsamte freie Aufl{\"o}sungsrate ermittelt werden. Doch auch Calcit zeigt einen verz{\"o}gernden Einfluss auf die freie C3S Aufl{\"o}sung, obwohl es den Gesamtprozess der Hydratation signifikant beschleunigt. Somit kann die behinderte Aufl{\"o}sung als m{\"o}gliche Ursache f{\"u}r die verz{\"o}gernde Wirkung w{\"a}hrend der Zementhydratation weder best{\"a}tigt noch widerlegt werden. Dieser Punkt sollte in zuk{\"u}nftigen Arbeiten weiter untersucht werden. Im letzten Schritt dieses Untersuchungsabschnitts wird die reine Kristallisation von C-S-H-Phasen und Portlandit untersucht. Es stellt sich heraus, dass Fließmittel insbesondere durch die Wirkung der Komplexierung von Ionen in der w{\"a}ssrigen Phase sowohl die Induktionszeit verl{\"a}ngern als auch die Kristallwachstumsrate ver{\"a}ndern. Dies allein kann aber nicht die komplette Verz{\"o}gerungswirkung erkl{\"a}ren. Ein wichtiger Verz{\"o}gerungsfaktor ist die Adsorption der Polymere an Kristalloberfl{\"a}chen als auch eine fließmittelbedingte Dispergierung von nanoskaligen Einzelpartikeln, die deren Agglomeration zu Kristallen behindert. Im letzten Hauptuntersuchungsabschnitt werden die gewonnenen Erkenntnisse auf die w{\"a}hrend der Zement- und Tricalciumsilikathydratation parallel ablaufenden Reaktionen analysiert. Dabei wird insbesondere die ionische Zusammensetzung der w{\"a}ssrigen Phase von C3S Pasten und Suspensionen untersucht, um Hinweise f{\"u}r eine kinetische Hemmung der Hydratationsreaktion zu identifizieren. Zusammenfassend wird festgestellt, dass die Ursachen der verz{\"o}gernden Wirkung von Fließmitteln auf die Hydratation von C3S auf die starke Verz{\"o}gerung der Kristallisation von Hydratphasen zur{\"u}ckzuf{\"u}hren ist. Dabei kommt den zwei Faktoren Komplexierung von Calciumionen an Oberfl{\"a}chen und Stabilisierung von nanoskaligen Partikeln eine zentrale Bedeutung zu. Diese Effekte k{\"o}nnen durch die Wirkung als Templat als auch durch Erh{\"o}hung der L{\"o}slichkeit infolge Komplexierung freier/gel{\"o}ster Ionen teilkompensiert werden. Dass die Aufl{\"o}sungsreaktion durch die Anwesenheit von Fließmitteln behindert wird, kann nur indirekt anhand der Entwicklung von Ionenkonzentrationen festgestellt werden. Ob dieser Vorgang die Ursache oder die Folge des L{\"o}sungs-F{\"a}llungs-Mechanismus der Hydratation ist und damit die verz{\"o}gernde Wirkung durch behinderte Aufl{\"o}sung des Edukts hervorgerufen wird, bleibt Gegenstand weiterer Untersuchungen. Im Rahmen der Arbeit kann auch gezeigt werden, dass Fließmittel chemisch als Inhibitoren wirken indem sie den Frequenzfaktor verringern. Dar{\"u}ber hinaus wird erstmalig eine Methode entwickelt, die die Bestimmung der Ionenkonzentration in Pasten in-situ erlaubt. Mit deren Hilfe wird dargestellt, dass die Entwicklung der Ionenkonzentration als auch die allgemein verwendete W{\"a}rmefreisetzungsrate (Kalorimetrie) miteinander korrespondiert. Dar{\"u}ber hinaus erlaubt die entwickelte Methode die weitere Differenzierung der Accelerationsperiode in drei Stadien. Die Kristallisation von C-S-H-Phasen und Portlandit ist f{\"u}r den Beginn der Haupthydratationsperiode entscheidend.},
  subject      = {Cement},
  language  = {en}
}
@inproceedings{SmarslyTauscher,
  author    = {Smarsly, Kay and Tauscher, Eike},
  title     = {IFC-BASED MONITORING INFORMATION MODELING FOR DATA MANAGEMENT IN STRUCTURAL HEALTH MONITORING},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2823},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28237},
  pages     = {7},
  abstract  = {This conceptual paper discusses opportunities and challenges towards the digital representation of structural health monitoring systems using the Industry Foundation Classes (IFC) standard. State-of-the-art sensor nodes, collecting structural and environmental data from civil infrastructure systems, are capable of processing and analyzing the data sets directly on-board the nodes. Structural health monitoring (SHM) based on sensor nodes that possess so called "on-chip intelligence" is, in this study, referred to as "intelligent SHM", and the infrastructure system being equipped with an intelligent SHM system is referred to as "intelligent infrastructure". Although intelligent SHM will continue to grow, it is not possible, on a well-defined formalism, to digitally represent information about sensors, about the overall SHM system, and about the monitoring strategies being implemented ("monitoring-related information"). Based on a review of available SHM regulations and guidelines as well as existing sensor models and sensor modeling languages, this conceptual paper investigates how to digitally represent monitoring-related information in a semantic model. With the Industry Foundation Classes, there exists an open standard for the digital representation of building information; however, it is not possible to represent monitoring-related information using the IFC object model. This paper proposes a conceptual approach for extending the current IFC object model in order to include monitoring-related information. Taking civil infrastructure systems as an illustrative example, it becomes possible to adequately represent, process, and exchange monitoring-related information throughout the whole life cycle of civil infrastructure systems, which is referred to as monitoring information modeling (MIM). However, since this paper is conceptual, additional research efforts are required to further investigate, implement, and validate the proposed concepts and methods.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{SilaniTalebiZiaeiRadetal.,
  author    = {Silani, Mohammad and Talebi, Hossein and Ziaei-Rad, S. and Hamouda, A.M.S. and Zi, Goangseup and Rabczuk, Timon},
  title     = {A three dimensional Extended Arlequin Method for Dynamic Fracture},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {425 -- 431},
  abstract  = {A three dimensional Extended Arlequin Method for Dynamic Fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Schuetz,
  author    = {Sch{\"u}tz, Stephan},
  title     = {Von der Faser zum Haus : Das Potential von gefalteten Wabenplatten aus Papierwerkstoffen in ihrer architektonischen Anwendung},
  doi       = {10.25643/bauhaus-universitaet.3804},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20181010-38044},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {223},
  abstract  = {Der vorliegende Text beschreibt die intensive Erforschung von Wabenplatten aus Papierwerkstoffen, die durch Faltprozesse neue r{\"a}umliche Zust{\"a}nde einnehmen k{\"o}nnen und somit ihr urspr{\"u}ngliches Anwendungsspektrum erweitern. Die gezeigten L{\"o}sungsans{\"a}tze bewegen sich dabei im Spannungsfeld von Architektur und Ingenieurbau, denn die gefalteten Bauteile sind nicht nur {\"a}ußerst tragf{\"a}hig sondern besitzen auch eine {\"a}sthetische Form. Die entwickelten Verfahren und Konstruktionen werden auf einem hohen architektonischen Niveau pr{\"a}sentiert und mit einfachen ingenieurtechnischen Methoden verifiziert. Zur L{\"o}sungsfindung werden geometrische Verfahren ebenso angewendet wie konstruktive Faustformeln und Recherchen aus Architektur und Forschung. Der Fokus der Arbeit liegt auf der Untersuchung von Faltungen in Wabenplatten. W{\"a}hrend der Auseinandersetzung mit der Thematik erschienen jedoch viele weitere Aspekte als sehr interessant und bearbeitungsw{\"u}rdig. Als theoretische Grundlage dieser Arbeit werden deshalb die geschichtliche Entwicklung und die gesellschaftliche Bedeutung von Papier und Papierwerkstoffen analysiert und deren Produktionsprozesse beleuchtet. Diese Vorgehensweise erm{\"o}glicht eine Einordnung des Potentials und der Bedeutung des Werkstoffs Papier. Der Kontext der Arbeit wird dadurch gest{\"a}rkt und f{\"u}hrt zu interessanten zuk{\"u}nftigen Forschungsans{\"a}tzen. Intensive Untersuchungen widmen sich der geometrischen Bestimmung von Faltungen in Wabenplatten aus Papierwerkstoffen sowie deren Manifestation als konstruktive Bauteile. Auch die statischen Eigenschaften der Elemente und ihr Konstruktionspotential werden erforscht und aufbereitet. Wichtige Impulse aus Forschung und Technik fließen in die Recherche der Arbeit ein und erlauben die Verortung der Ergebnisse im architektonischen Kontext. Versuchsreihen und Materialstudien an Prototypen belegen die Ergebnisse virtueller und rechnerischer Studien. Konzepte zur parametrischen Berechnung und Visualisierung der Forschungsergebnisse werden pr{\"a}sentiert und zeigen zukunftsf{\"a}hige Planungshilfen f{\"u}r die Industrie auf. Etliche Testreihen zu unterschiedlichsten Abdichtungskonzepten f{\"u}hren zur Realisierung eines sehenswerten Experimentalbaus. Er erlaubt die dauerhafte Untersuchung der entwickelten Bauteile unter realistischen Bedingungen und best{\"a}tigt deren Leistungsf{\"a}higkeit. Dadurch wird nicht nur ein dauerhaftes Monitoring und eine Evaluierung der Leistungsdaten m{\"o}glich sondern es wird auch der sichtbare Beweis erbracht, dass mit Papierwerkstoffen effiziente und hochwertige Architekturen zu realisieren sind, welche das enorme gestalterische Potential von gefalteten Wabenplatten ausnutzen.},
  subject      = {Tragendes Teil},
  language  = {de}
}
@techreport{SchwanckRuiz,
  author    = {Schwanck, Anke and Ruiz, Marcelo},
  title     = {Allokation und Steuerung von Fl{\"a}chenressourcen in Hochschulen (FLHO)},
  organization    = {Bauhaus-Universit{\"a}t Weimar, Fakult{\"a}t Bauingenieurwesen, Professur Betriebswirtschaftslehre im Bauwesen},
  isbn      = {978-3-95773-188-3},
  doi       = {10.25643/bauhaus-universitaet.2357},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150227-23570},
  pages     = {491},
  abstract  = {Generell hat sich im Forschungsprojekt insbesondere durch die Gespr{\"a}che mit den Hochschulvertretern best{\"a}tigt, dass f{\"u}r qualitativ hochwertige Lehre und Forschung qualitativ hochwertige Fl{\"a}chen in ausreichendem Umfang notwendig sind. Ein Ziel der Forschungsarbeit ist die Entwicklung von Modellen zur Allokation und Steuerung von Fl{\"a}chenressourcen in Hochschulen. Ausgehend von Darstellungen und Erfahrungen f{\"u}r die Fl{\"a}chensteuerung aus Unternehmen, anderen Bereichen der {\"o}ffentlichen Verwaltung und Forschungseinrichtungen wurden m{\"o}gliche Steuerungsverfahren f{\"u}r Hochschulen untersucht. Es wurde ein Steuerungsmodell f{\"u}r Hochschulen entwickelt, das auf die hochschulinternen und die extern wirksamen Rahmenbedingungen reagiert. Die hochschulinterne Fl{\"a}chenallokation wird zum einen maßgeblich von externen Rahmen-bedingungen und zum zweiten von internen Prozessen, Abl{\"a}ufen und Strukturen beeinflusst. Die Kenntnis dieser Bedingungen wird als Voraussetzung f{\"u}r die Benennung von Erfolgsfak-toren f{\"u}r die Implementation neuer Steuerungsmodelle angenommen. Analysiert wurden daher die liegenschaftspolitischen und die organisatorischen Rahmenbedingungen sowie die steuerungsrelevanten Eigenschaften der Fl{\"a}chen selber.},
  subject      = {Fl{\"a}che},
  language  = {de}
}
@article{Schuch,
  author    = {Schuch, Kai},
  title     = {Theoretische Modelle zur Beschreibung des Aggregationsprozesses von w{\"a}ssrigen Alkalisilikatsolen (Wasserglas) durch spezielle Gelinitiatoren zum Aufbau von stabilen silikatischen Schichtmaterialien},
  series = {Steuerung des Aggregationsprozesses in w{\"a}ssrigen Alkalisilikatsolendurch spezielle Gelinitiatoren und moderate W{\"a}rmebehandlung zum Aufbau einer stabilen Silikatbeschichtung},
  journal   = {Steuerung des Aggregationsprozesses in w{\"a}ssrigen Alkalisilikatsolendurch spezielle Gelinitiatoren und moderate W{\"a}rmebehandlung zum Aufbau einer stabilen Silikatbeschichtung},
  doi       = {10.25643/bauhaus-universitaet.2480},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20151123-24807},
  abstract  = {In dem Artikel werden die theoretischen Modelle und die Zusammenfassung aus der Dissertation von Kai Schuch, Bauhaus Universit{\"a}t Weimar 2014, zusammengef{\"u}hrt.},
  subject      = {Wasserglas},
  language  = {de}
}
@phdthesis{Rohde,
  author    = {Rohde, Theres},
  title     = {Die Bau-Ausstellung zu Beginn des 20. Jahrhunderts oder "Die Schwierigkeit zu wohnen"},
  doi       = {10.25643/bauhaus-universitaet.2442},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150811-24425},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {530},
  abstract  = {Die Bau-Ausstellung zu Beginn des 20. Jahrhunderts oder „Die Schwierigkeit zu wohnen", so lautet der Titel der Arbeit und legt damit ihren Fokus offen. Sie betrachtet ein um 1900 aufkommendes Ausstellungsph{\"a}nomen in seinen ersten Dekaden; in einer Zeit, in der das Wohnen problematisiert wurde. Der Praxis des Wohnens ist Anfang des 20. Jahrhunderts seine Selbstverst{\"a}ndlichkeit abgesprochen worden. Die Bau-Ausstellung wird als ein Symptom dieses Verlusts interpretiert und zugleich als Versuch, ihm entgegenzuwirken. Statt sie innerdisziplin{\"a}r als eine architekturgeschichtliche Episode der Moderne rein positivistisch zu beschreiben, legt die vorliegende Arbeit im Typus der Bau-Ausstellung eine weit reichende Problematik frei, die kulturphilosophische ebenso wie medientheoretische Dimensionen hat: Inwieweit l{\"a}sst sich das Wohnen {\"u}berhaupt ausstellen? Wie kann man eine allt{\"a}gliche Praxis, die kaum eine Definition erlaubt, zeigen? Den Umgang mit dieser Aporie untersucht die Arbeit.},
  subject      = {Architektur},
  language  = {de}
}
@phdthesis{RodriguezSchaeffer,
  author    = {Rodr{\´i}guez Schaeffer, Alan Paul},
  title     = {Lighting in urban heritage: case study of Chiapa de Corzo, Chiapas, Mexico},
  doi       = {10.25643/bauhaus-universitaet.2421},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150630-24217},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {327},
  abstract  = {As human thought was developing, likewise, the technology used for illumination was growing. But a haul through history, reviewing its pages and analyzing it, inherently brings up old and new question, like: Is it possible to alter negatively the image of historic buildings and monuments through inadequate lighting to the degree of distorting the perception that people have of the work? and if so, what are the causes that generate it? Do the light designers take into consideration criteria to protect not only historic buildings and monuments, but also the environment? What are the consequences that may generate the inadequate lighting of urban heritage to the environment? What are the factors to consider for a proper illumination of urban heritage? The answers to these questions will help lay the foundation for proper illumination of the urban heritage, avoiding at the maximum the light pollution and the effects that it generates, seeking a balance and harmonious reconciliation between the technology, urban heritage and environment, taking as a framework and the case study the urban heritage of a city from the colonial era in southern Mexico, with pre-Hispanic roots and where today you can still see through its streets and buildings an atmosphere of mysticism reflection of their folklore and traditions, this city is known as Chiapa de Corzo, Chiapas.},
  subject      = {Konservierung},
  language  = {en}
}
@inproceedings{Rodrigues,
  author    = {Rodrigues, M. Manuela},
  title     = {OPERATIONAL PROPERTIES OF THE LAGUERRE TRANSFORM},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2818},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28186},
  pages     = {5},
  abstract  = {The Laguerre polynomials appear naturally in many branches of pure and applied mathematics and mathematical physics. Debnath introduced the Laguerre transform and derived some of its properties. He also discussed the applications in study of heat conduction and to the oscillations of a very long and heavy chain with variable tension. An explicit boundedness for some class of Laguerre integral transforms will be present.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{Rodehorst,
  author    = {Rodehorst, Volker},
  title     = {EVALUATION OF THE METRIC TRIFOCAL TENSOR FOR RELATIVE THREE-VIEW ORIENTATION},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2817},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28178},
  pages     = {7},
  abstract  = {In photogrammetry and computer vision the trifocal tensor is used to describe the geometric relation between projections of points in three views. In this paper we analyze the stability and accuracy of the metric trifocal tensor for calibrated cameras. Since a minimal parameterization of the metric trifocal tensor is challenging, the additional constraints of the interior orientation are applied to the well-known projective 6-point and 7-point algorithms for three images. The experimental results show that the linear 7-point algorithm fails for some noise-free degenerated cases, whereas the minimal 6-point algorithm seems to be competitive even with realistic noise.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@phdthesis{Riehmann,
  author    = {Riehmann, Patrick},
  title     = {Advanced Visual Interfaces for Informed Decision-Making},
  publisher = {Patrick Riehmann},
  doi       = {10.25643/bauhaus-universitaet.2454},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150907-24542},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {132},
  abstract  = {This thesis presents new interactive visualization techniques and systems intended to support users with real-world decisions such as selecting a product from a large variety of similar offerings, finding appropriate wording as a non-native speaker, and assessing an alleged case of plagiarism. The Product Explorer is a significantly improved interactive Parallel Coordinates display for facilitating the product selection process in cases where many attributes and numerous alternatives have to be considered. A novel visual representation for categorical and ordered data with only few occurring values, the so-called extended areas, in combination with cubic curves for connecting the parallel axes, are crucial for providing an effective overview of the entire dataset and to facilitate the tracing of individual products. The visual query interface supports users in quickly narrowing down the product search to a small subset or even a single product. The scalability of the approach towards a large number of attributes and products is enhanced by the possibility of setting some constraints on final attributes and, therefore, reducing the number of considered attributes and data items. Furthermore, an attribute repository allows users to focus on the most important attributes at first and to bring in additional criteria for product selection later in the decision process. A user study confirmed that the Product Explorer is indeed an excellent tool for its intended purpose for casual users. The Wordgraph is a layered graph visualization for the interactive exploration of search results for complex keywords-in-context queries. The system relies on the Netspeak web service and is designed to support non-native speakers in finding customary phrases. Uncertainties about the commonness of phrases are expressed with the help of wildcard-based queries. The visualization presents the alternatives for the wildcards in a multi-column layout: one column per wildcard with the other query fragments in between. The Wordgraph visualization displays the sorted results for all wildcards at once by appropriately arranging the words of each column. A user study confirmed that this is a significant advantage over simple textual result lists. Furthermore, visual interfaces to filter, navigate, and expand the graph allow interactive refinement and expansion of wildcard-containing queries. Furthermore, this thesis presents an advanced visual analysis tool for assessing and presenting alleged cases of plagiarism and provides a three-level approach for exploring the so-called finding spots in their context. The overview shows the relationship of the entire suspicious document to the set of source documents. An intermediate glyph-based view reveals the structural and textual differences and similarities of a set of finding spots and their corresponding source text fragments. Eventually, the actual fragments of the finding spot can be shown in a side-by-side view with a novel structured wrapping of both the source, as well as the suspicious text. The three different levels of detail are tied together by versatile navigation and selection operations. Reviews with plagiarism experts confirm that this tool can effectively support their workflow and provides a significant improvement over existing static visualizations for assessing and presenting plagiarism cases. The three main contributions of this research have a lot in common aside from being carefully designed and scientifically grounded solutions to real-world decision problems. The first two visualizations facilitate the decision for a single possibility out of many alternatives, whereas the latter ones deal with text at varying levels of detail. All visual representations are clearly structured based on horizontal and vertical layers contained in a single view and they all employ edges for depicting the most important relationships between attributes, words, or different levels of detail. A detailed analysis considering the context of the established decision-making literature reveals that important steps of common decision models are well-supported by the three visualization systems presented in this thesis.},
  subject      = {Informatik},
  language  = {en}
}
@article{RabizadehSaboorBagherzadehRabczuk,
  author    = {Rabizadeh, Ehsan and Saboor Bagherzadeh, Amir and Rabczuk, Timon},
  title     = {Application of goal-oriented error estimation and adaptive mesh refinement on thermo-mechanical multifield problems},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {27 -- 44},
  abstract  = {Application of goal-oriented error estimation and adaptive mesh re_nement on thermo-mechanical multi_eld problems},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{OtholdVoss,
  author    = {Othold, Tim and Voss, Christiane},
  title     = {From media anthropology to anthropomediality},
  series = {Anthropological Notebooks},
  journal   = {Anthropological Notebooks},
  doi       = {10.25643/bauhaus-universitaet.3157},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31573},
  pages     = {75 -- 82},
  abstract  = {Media anthropology is a new and interdisciplinary field of research with very different subjects and methods that seems to be already heavily informed by a comparatively narrow understanding of media as mass media (e.g. TV, Internet, social web, etc.). Therefore, most theories in this field, at least implicitly, employ a hierarchical and often dichotomic preconception of the two poles of media-human relations, by analysing the operationalities and ontologies of the human and the media independently from one another. This article deviates from this line of thought by advocating an expanded, symmetrical and relational understanding of the terms media and human, taking them as always already intermingled facets of a broader dynamic configuration. Starting from a consideration of the historically powerful, yet overlooked media of the so-called habitat diorama, the heuristic concept of "anthropomediality" is to be developed. Eventually, this relational approach may open up a new, interesting field for interrogation of (media-)anthropological analysis in general.},
  subject      = {Medien},
  language  = {en}
}
@article{Nogueira,
  author    = {Nogueira, Priscilla},
  title     = {"Battlers" and their homes: About self-production of residences made by the brazilian new middle class},
  series = {Social Inclusion},
  journal   = {Social Inclusion},
  doi       = {10.17645/si.v3i2.67},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31568},
  pages     = {44 -- 61},
  abstract  = {The article presents preliminary results and qualitative analysis obtained from the doctoral research provisory entitled "How do Brazilian 'battlers' reside?", which is in progress at the Institute for European Urban Studies, Bauhaus Univer-sity Weimar. It critically discusses the contradictions of the production of residences in Brazil made by an emerging so-cial group, lately called the Brazilian new middle class. For the last ten years, a number of government policies have provoked a general improvement of the purchasing power of the poor. Between those who completely depend on the government to survive and the upper middle class, there is a wide (about 100 million people) and economically stable lower middle group, which has found its own ways of dealing with its demand for housing. The conventional models of planning, building and buying are not suitable for their technical, financial and personal needs. Therefore, they are con-currently planners, constructors and residents, building and renovating their own properties themselves, but still with very limited education and technical knowledge and restricted access to good building materials and constructive ele-ments, formal technicians, architects or engineers. On the one hand, the result is an informal and more or less autono-mous self-production, with all sorts of technical problems and very interesting and creative spatial solutions to every-day domestic situations. On the other hand, the repercussions for urban space are questionable: although basic infrastructure conditions have improved, building densities are high and green areas are few. Lower middle class neigh-bourhoods present a restricted collective everyday life. They look like storage spaces for manpower; people who live to work in order to be able to consume—and build—what they could not before. One question is, to what extent the lat-est economic rise of Brazil has really resulted in social development for lower middle income families in the private sphere regarding their residences, and in the collective sphere, regarding the neighbourhoods they inhabit and the ur-ban space in general.},
  subject      = {Brasilien},
  language  = {en}
}
@inproceedings{NguyenTuanLahmerDatchevaetal.,
  author    = {Nguyen-Tuan, Long and Lahmer, Tom and Datcheva, Maria and Stoimenova, Eugenia and Schanz, Tom},
  title     = {PARAMETER IDENTIFICATION APPLYING IN COMPLEX THERMO-HYDRO-MECHANICAL PROBLEMS LIKE THE DESIGN OF BUFFER ELEMENTS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2816},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28162},
  pages     = {6},
  abstract  = {This study contributes to the identification of coupled THM constitutive model parameters via back analysis against information-rich experiments. A sampling based back analysis approach is proposed comprising both the model parameter identification and the assessment of the reliability of identified model parameters. The results obtained in the context of buffer elements indicate that sensitive parameter estimates generally obey the normal distribution. According to the sensitivity of the parameters and the probability distribution of the samples we can provide confidence intervals for the estimated parameters and thus allow a qualitative estimation on the identified parameters which are in future work used as inputs for prognosis computations of buffer elements. These elements play e.g. an important role in the design of nuclear waste repositories.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{NguyenThanhValizadehNguyenetal.,
  author    = {Nguyen-Thanh, Nhon and Valizadeh, Navid and Nguyen, Manh Hung and Nguyen-Xuan, Hung and Zhuang, Xiaoying and Areias, Pedro and Zi, Goangseup and Bazilevs, Yuri and De Lorenzis, Laura and Rabczuk, Timon},
  title     = {An extended isogeometric thin shell analysis based on Kirchhoff-Love theory},
  series = {Computer Methods in Applied Mechanics and Engineering},
  journal   = {Computer Methods in Applied Mechanics and Engineering},
  pages     = {265 -- 291},
  abstract  = {An extended isogeometric thin shell analysis based on Kirchho_-Love theory},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@phdthesis{Nguyen,
  author    = {Nguyen, Manh Hung},
  title     = {µ-Hyperholomorphic Function Theory in R³: Geometric Mapping Properties and Applications},
  doi       = {10.25643/bauhaus-universitaet.2447},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150817-24477},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {155},
  abstract  = {This thesis applies the theory of \psi-hyperholomorphic functions dened in R^3 with values in the set of paravectors, which is identified with the Eucledian space R^3, to tackle some problems in theory and practice: geometric mapping properties, additive decompositions of harmonic functions and applications in the theory of linear elasticity.},
  subject      = {Mathematik},
  language  = {en}
}
@inproceedings{Neri,
  author    = {Neri, Maria Luisa},
  title     = {Landscape and City during Fascism: Enrico del Debbio's Foro Mussolini},
  series = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography},
  booktitle = {Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography},
  doi       = {10.25643/bauhaus-universitaet.2387},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150504-23877},
  pages     = {1 -- 16},
  abstract  = {Beitr{\"a}ge zum Symposium „Urban design and dictatorship in the 20th century: Italy, Portugal, the Soviet Union, Spain and Germany. History and Historiography". Weimar, 21.-22. November 2013},
  subject      = {St{\"a}dtebau},
  language  = {en}
}
@inproceedings{NasirBargstaedt,
  author    = {Nasir, A.R. and Bargst{\"a}dt, Hans-Joachim},
  title     = {AMELIORATING EMPLOYABILITY IN CONSTRUCTION THROUGH BIM INNOVATION},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2815},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28157},
  pages     = {6},
  abstract  = {Low-skilled labor makes a significant part of the construction sector, performing daily production tasks that do not require specific technical knowledge or confirmed skills. Today, construction market demands increasing skill levels. Many jobs that were once considered to be undertaken by low or un-skilled labor, now demand some kind of formal skills. The jobs that require low skilled labor are continually decreasing due to technological advancement and globalization. Jobs that previously required little or no training now require skilful people to perform the tasks appropriately. The study aims at ameliorating employability of less skilled manpower by finding ways to instruct them for performing constructions tasks. A review of exiting task instruction methodologies in construction and the underlying gaps within them warrants an appropriate way to train and instruct low skilled workers for the tasks in construction. The idea is to ensure the required quality of construction with technological and didactic aids seeming particularly purposeful to prepare potential workers for the tasks in construction without exposing them to existing communication barriers. A BIM based technology is considered promising along with the integration of visual directives/animations to elaborate the construction tasks scheduled to be carried on site.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@article{NanthakumarLahmerZhuangetal.,
  author    = {Nanthakumar, S.S. and Lahmer, Tom and Zhuang, Xiaoying and Zi, Goangseup and Rabczuk, Timon},
  title     = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  series = {Inverse Problems in Science and Engineering},
  journal   = {Inverse Problems in Science and Engineering},
  abstract  = {Detection of material interfaces using a regularized level set method in piezoelectric structures},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{MuellerLudwigBenHahaetal.,
  author    = {M{\"u}ller, Matthias and Ludwig, Horst-Michael and Ben Haha, Mohsen and Zajac, Maciej},
  title     = {Optimization of multi-component cements containing clinker, slag, V-fly ash, limestone},
  series = {Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2},
  booktitle = {Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2},
  editor    = {Ludwig, Horst-Michael},
  organization    = {F.A.Finger-Institut f{\"u}r Baustoffkunde, Bauhaus-Universit{\"a}t Weimar},
  isbn      = {978-3-00-050225-5 (Bauhaus-Universit{\"a}tsverlag Weimar)},
  doi       = {10.25643/bauhaus-universitaet.4870},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240507-48700},
  pages     = {424-431},
  abstract  = {The aim of this study was to investigate the optimization of the strength development of quaternary cements with 50 \% clinker by a variation of the particle size distribution of the components GGBFS, fly ash and limestone powder. By balancing the overall PSD of the cement by using unprocessed fly ash and coarse limestone powder in combination with a very fine GGBFS, the water demand of the resulting quaternary cements remained unaltered, while the compressive strength of the cements was increased significantly after 7d, 28 and 56d. As can be expected, the quaternary cement with 30 wt.\% of the fine slag exhibited a stronger strength increase (about 18 \% after 28 d) than the cements with only 20 wt.\% slag (about 10\% after 28d).},
  subject      = {Zement},
  language  = {en}
}
@inproceedings{Musial,
  author    = {Musial, Michal},
  title     = {THE INFLUENCE OF CRACKS AND OVERESTIMATION ERRORS ON THE DEFLECTION OF THE REINFORCED CONCRETE BEAMS IN THE RIGID FINITE ELEMENT METHOD},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2814},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28142},
  pages     = {6},
  abstract  = {This article presents the Rigid Finite Element Method in the calculation of reinforced concrete beam deflection with cracks. Initially, this method was used in the shipbuilding industry. Later, it was adapted in the homogeneous calculations of the bar structures. In this method, rigid mass discs serve as an element model. In the flat layout, three generalized coordinates (two translational and one rotational) correspond to each disc. These discs are connected by elastic ties. The genuine idea is to take into account a discrete crack in the Rigid Finite Element Method. It consists in the suitable reduction of the rigidity in rotational ties located in the spots, where cracks occurred. The susceptibility of this tie results from the flexural deformability of the element and the occurrence of the crack. As part of the numerical analyses, the influence of cracks on the total deflection of beams was determined. Furthermore, the results of the calculations were compared to the results of the experiment. Overestimations of the calculated deflections against the measured deflections were found. The article specifies the size of the overestimation and describes its causes.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{MuellerLudwigSchulteSchreppingetal.,
  author    = {Mueller, Matthias and Ludwig, Horst-Michael and Schulte-Schrepping, Christoph and Breitenb{\"u}cher, Rolf},
  title     = {Dauerhafte Betonfahrbahndecken durch Verwendung unterschiedlicher Bindemittel in Ober- und Unterbeton},
  series = {Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2},
  booktitle = {Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2},
  editor    = {Ludwig, Horst-Michael},
  organization    = {F.A.Finger-Institut f{\"u}r Baustoffkunde, Bauhaus-Universit{\"a}t Weimar},
  isbn      = {978-3-00-050225-5 (Bauhaus-Universit{\"a}tsverlag Weimar)},
  doi       = {10.25643/bauhaus-universitaet.4871},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20240507-48711},
  pages     = {2536-2543},
  abstract  = {Gem{\"a}ß dem Regelwerk f{\"u}r Betonstraßen muss f{\"u}r zweischichtige Betonfahrbahndecken derselbe Zement in Ober- und Unterbeton verwendet werden. Weiterhin ist die Anrechnung von Flugasche auf den w/z-Wert nicht gestattet. Durch eine flexiblere Handhabung der Bindemittel k{\"o}nnten sich Vorteile f{\"u}r die Betonbauweise ergeben. So k{\"o}nnte z.B. der st{\"a}rker durch Frost beanspruchte Oberbeton mit CEM I hergestellt werden, w{\"a}hrend Zemente mit h{\"o}heren H{\"u}ttensandgehalten nur im Unterbeton angewendet werden. Im Unterbeton k{\"o}nnten dann Gesteinsk{\"o}rnungen eingesetzt werden, die in einer herk{\"o}mmlichen CEM I-Rezeptur als AKR-kritisch eingestuft w{\"u}rden. Anhand von AKR-Performance-Pr{\"u}fungen konnte die hohe Wirksamkeit h{\"u}ttensandhaltiger Zemente sowie auch von Flugasche auf die AKR-Verminderung aufgezeigt werden. Schon mit einem CEM II/B-S wurden AKR-kritische Rezepturen in den unkritischen Bereich verschoben. Der Frost-Tausalz-Widerstand der Betone wurde bei hohen Gehalten an H{\"u}ttensand bzw. H{\"u}ttensand + Flugasche verringert, bewegte sich aber in jedem Fall noch im g{\"u}nstigen Bereich. Um eine Beeintr{\"a}chtigung der baupraktischen Umsetzbarkeit zu vermeiden, sollte sich die Festigkeitsentwicklung von Ober- und Unterbeton im jungen Alter nicht zu stark unterscheiden. Modellberechnungen zur Festlegung einer Mindestfestigkeit f{\"u}r die fr{\"u}he Belastung sind derzeit noch in Bearbeitung.},
  subject      = {Beton},
  language  = {de}
}
@article{MsekhSargadoJamshidianetal.,
  author    = {Msekh, Mohammed Abdulrazzak and Sargado, M. and Jamshidian, M. and Areias, Pedro and Rabczuk, Timon},
  title     = {ABAQUS implementation of phase_field model for brittle fracture},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {472 -- 484},
  abstract  = {ABAQUS implementation of phase_field model for brittle fracture},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{MortazaviRabczuk,
  author    = {Mortazavi, Bohayra and Rabczuk, Timon},
  title     = {Multiscale modeling of heat conduction in graphene laminates},
  series = {Carbon},
  journal   = {Carbon},
  pages     = {1 -- 7},
  abstract  = {Multiscale modeling of heat conduction in graphene laminates},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@article{MortazaviPereiraJiangetal.,
  author    = {Mortazavi, Bohayra and Pereira, Luiz Felipe C. and Jiang, Jin-Wu and Rabczuk, Timon},
  title     = {Modelling heat conduction in polycrystalline hexagonal boron-nitride films},
  series = {Scientific Reports},
  journal   = {Scientific Reports},
  doi       = {10.1038/srep13228},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170425-31534},
  abstract  = {We conducted extensive molecular dynamics simulations to investigate the thermal conductivity of polycrystalline hexagonal boron-nitride (h-BN) films. To this aim, we constructed large atomistic models of polycrystalline h-BN sheets with random and uniform grain configuration. By performing equilibrium molecular dynamics (EMD) simulations, we investigated the influence of the average grain size on the thermal conductivity of polycrystalline h-BN films at various temperatures. Using the EMD results, we constructed finite element models of polycrystalline h-BN sheets to probe the thermal conductivity of samples with larger grain sizes. Our multiscale investigations not only provide a general viewpoint regarding the heat conduction in h-BN films but also propose that polycrystalline h-BN sheets present high thermal conductivity comparable to monocrystalline sheets.},
  subject      = {W{\"a}rmeleitf{\"a}higkeit},
  language  = {en}
}
@article{MortazaviCunibertiRabczuk,
  author    = {Mortazavi, Bohayra and Cuniberti, G. and Rabczuk, Timon},
  title     = {Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study},
  series = {Computational Materials Science},
  journal   = {Computational Materials Science},
  pages     = {285 -- 289},
  abstract  = {Mechanical properties and thermal conductivity of graphitic carbon nitride: A molecular dynamics study},
  subject      = {Angewandte Mathematik},
  language  = {en}
}
@inproceedings{MeierSchanz,
  author    = {Meier, J{\"o}rg and Schanz, Tom},
  title     = {Benchmarking of Optimization Algorithms},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2813},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28134},
  pages     = {6},
  abstract  = {In this paper, we present an empirical approach for objective and quantitative benchmarking of optimization algorithms with respect to characteristics induced by the forward calculation. Due to the professional background of the authors, this benchmarking strategy is illustrated on a selection of search methods in regard to expected characteristics of geotechnical parameter back calculation problems. Starting from brief introduction into the approach employed, a strategy for optimization algorithm benchmarking is introduced. The benchmarking utilizes statistical tests carried out on well-known test functions superposed with perturbations, both chosen to mimic objective function topologies found for geotechnical objective function topologies. Here, the moved axis parallel hyper-ellipsoid test function and the generalized Ackley test function in conjunction with an adjustable quantity of objective function topology roughness and fraction of failing forward calculations is analyzed. In total, results for 5 optimization algorithms are presented, compared and discussed.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@inproceedings{MartinezSotoJentsch,
  author    = {Martinez Soto, Aner and Jentsch, Mark F.},
  title     = {Quantifizierung der langfristigen Entwicklung des Nutzungsgrades von Anlagen und Ger{\"a}ten im Wohnungssektor in Deutschland und Bestimmung zuk{\"u}nftiger Energieeinsparpotenziale im Hinblick auf die Klimaschutzziele der Bundesregierung},
  series = {Bauphysiktage Kaiserslautern 2015, Kaiserslautern, 21-22 Oktober 2015},
  booktitle = {Bauphysiktage Kaiserslautern 2015, Kaiserslautern, 21-22 Oktober 2015},
  editor    = {Kornadt, Oliver},
  edition   = {Zweitver{\"o}ffentlichung},
  publisher = {Eigenverlag der Technischen Universit{\"a}t Kaiserslautern},
  address   = {Kaiserslautern},
  doi       = {10.25643/bauhaus-universitaet.3106},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170516-31067},
  pages     = {137-141},
  abstract  = {Etwa ein Viertel des gesamten Endenergieverbrauchs (26\%) in Deutschland entf{\"a}llt auf den Wohnungssektor, wodurch dieser Sektor einen erheblichen Anteil am m{\"o}glichen Einsparpotenzial an Energie hat. Im Hinblick auf das Klimaschutzziel der Europ{\"a}ischen Union, die Energieeffizienz im Vergleich zu 1990 um 20\% zu erh{\"o}hen, stellt sich daher die Frage, welche Einsparpotenziale es im Wohnungssektor tats{\"a}chlich gibt und wie diese quantifiziert werden k{\"o}nnen. In dieser Arbeit wird der Einfluss der Parameter, die den Endenergieverbrauch beeinflussen, mit Hilfe einer Sensitivit{\"a}tsanalyse bestimmt. Die Ergebnisse der Sensitivit{\"a}tsanalyse zeigen, dass die einflussreichsten Parameter auf den Endenergieverbrauch der Innentemperaturbedarf, die L{\"a}nge der Heizperiode, die Außentemperatur (Gradtagzahl) und die Anzahl der Wohnungen sind. Dies sind Variablen, die nicht durch Verordnungen reguliert werden k{\"o}nnen. Der einzige Parameter, der regulierbar ist und einen bedeutenden Einfluss auf den Endenergieverbrauch hat, ist der Nutzungsgrad der Anlagen/Ger{\"a}te f{\"u}r Raumw{\"a}rme, Warmwasser und Kochen (sowie zu einem geringen Teil der Wirkungsgrad der eingesetzten Beleuchtung). Zur Quantifizierung des Energieeinsparpotentials im deutschen Wohnungssektor bez{\"u}glich des Nutzungsgrades wurden in dieser Arbeit Daten zur Bestimmung der langfristigen Entwicklung (Zeitraum 1990-2010) des Nutzungsgrades von Anlagen und Ger{\"a}ten analysiert. Mit verschiedenen Angaben aus der Literatur und mit Hilfe von S{\"a}ttigungskurven wurde die Entwicklung der Nutzugsgrade der Anlagen/Ger{\"a}te entsprechend der Energiequellen zwischen 1990 und 2010 ermittelt. Die erhaltenden S{\"a}ttigungskurven erm{\"o}glichen die Bestimmung der Entwicklung des Nutzenergieverbrauchs im deutschen Wohnungssektor. Hierbei wurde festgestellt, dass die Differenz zwischen Nutzenergieverbrauch und Endenergieverbrauch einen R{\"u}ckgang von 12 \% im betrachtenden Zeitraum verzeichnete und dass das Energieeinsparpotenzial in Abh{\"a}ngigkeit von der Energiequelle betr{\"a}chtlich variieren kann (um derzeit mehr als 35\%-Punkte). Im Hinblick auf das oben genannte Klimaschutzziel werden in dieser Arbeit verschiedene Entwicklungsszenarien auf Basis des Nutzungsgrades der Anlagen und der Energiequellen analysiert. Hierbei wird deutlich, dass das theoretische Energieeinsparpotenzial im deutschen Wohnungssektor bez{\"u}glich des durchschnittlichen Nutzungsgrades nur zwischen 4 und 15 \% liegt. Dies bedeutet, dass eine deutliche Reduktion des Endenergiebedarfs im Wohnungssektor nur stattfinden kann, wenn andere Energieeinsparmaßnahmen betrachtet werden. Basierend auf den Ergebnissen der Sensitivit{\"a}tsanalyse werden hierzu Empfehlungen gegeben.},
  subject      = {Wohnung},
  language  = {de}
}
@inproceedings{MacedoBentaPicadoSantos,
  author    = {Macedo, Joaquim Miguel and Benta, Agostinho and Picado-Santos, Luis},
  title     = {USE OF MICROSIMULATION IN THE ADAPTATION TO PORTUGAL OF THE HCM 2000 METHODOLOGY FOR BASIC FREEWAY SEGMENTS},
  series = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  booktitle = {Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar},
  editor    = {G{\"u}rlebeck, Klaus and Lahmer, Tom},
  organization    = {Bauhaus-Universit{\"a}t Weimar},
  issn      = {1611-4086},
  doi       = {10.25643/bauhaus-universitaet.2812},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20170314-28122},
  pages     = {7},
  abstract  = {Portugal is one of the European countries with higher spatial and population freeway network coverage. The sharp growth of this network in the last years instigates the use of methods of analysis and the evaluation of their quality of service in terms of the traffic performance, typically performed through internationally accepted methodologies, namely that presented in the Highway Capacity Manual (HCM). Lately, the use of microscopic traffic simulation models has been increasingly widespread. These models simulate the individual movement of the vehicles, allowing to perform traffic analysis. The main target of this study was to verify the possibility of using microsimulation as an auxiliary tool in the adaptation of the methodology by HCM 2000 to Portugal. For this purpose, were used the microscopic simulators AIMSUN and VISSIM for the simulation of the traffic circulation in the A5 Portuguese freeway. The results allowed the analysis of the influence of the main geometric and traffic factors involved in the methodology by HCM 2000. In conclusion, the study presents the main advantages and limitations of the microsimulators AIMSUN and VISSIM in modelling the traffic circulation in Portuguese freeways. The main limitation is that these microsimulators are not able to simulate explicitly some of the factors considered in the HCM 2000 methodology, which invalidates their direct use as a tool in the quantification of those effects and, consequently, makes the direct adaptation of this methodology to Portugal impracticable.},
  subject      = {Angewandte Informatik},
  language  = {en}
}
@misc{Luedtke,
  type      = {Master Thesis},
  author    = {L{\"u}dtke, Cornelius},
  title     = {Systemidentifikation von Bauteilen mittels optischer Messmethoden},
  doi       = {10.25643/bauhaus-universitaet.2429},
  url       = {http://nbn-resolving.de/urn:nbn:de:gbv:wim2-20150706-24293},
  school      = {Bauhaus-Universit{\"a}t Weimar},
  pages     = {97},
  abstract  = {Im Rahmen der Forschung an Bauteil- und F{\"u}gestellend{\"a}mpfung wurden die Schwingungen der Bauteile bisher mit 1D-Laser-Vibrometern gemessen. Nun steht ein 3D-Laser-Scanner zur Verf{\"u}gung. Diese Arbeit besch{\"a}ftigt sich mit der Frage, ob mit dem 3D-Laser-Scanner bessere und weitere relevante Daten bei der Schwingungsmessung gewonnen werden k{\"o}nnen.},
  subject      = {Schwingung},
  language  = {de}
}